From 80359a9c5c03d585686e2596c9ee46703eb03047 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 22 Jul 2008 11:09:16 +0100 Subject: [PATCH] whiteheat: coding style Bring ezusb and whiteheat into line with the coding style Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/serial/ezusb.c | 22 +- drivers/usb/serial/whiteheat.c | 386 ++++++++++++++++++--------------- drivers/usb/serial/whiteheat.h | 78 ++++--- 3 files changed, 280 insertions(+), 206 deletions(-) diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index cc4fbd9d60..711e84f6ed 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -20,7 +20,8 @@ /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ #define CPUCS_REG 0x7F92 -int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest) +int ezusb_writememory(struct usb_serial *serial, int address, + unsigned char *data, int length, __u8 request) { int result; unsigned char *transfer_buffer; @@ -33,26 +34,27 @@ int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *da transfer_buffer = kmemdup(data, length, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, length); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", + __func__, length); return -ENOMEM; } - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000); - kfree (transfer_buffer); + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + request, 0x40, address, 0, transfer_buffer, length, 3000); + kfree(transfer_buffer); return result; } +EXPORT_SYMBOL_GPL(ezusb_writememory); -int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit) +int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit) { int response; /* dbg("%s - %d", __func__, reset_bit); */ - response = ezusb_writememory (serial, CPUCS_REG, &reset_bit, 1, 0xa0); + response = ezusb_writememory(serial, CPUCS_REG, &reset_bit, 1, 0xa0); if (response < 0) - dev_err(&serial->dev->dev, "%s- %d failed\n", __func__, reset_bit); + dev_err(&serial->dev->dev, "%s- %d failed\n", + __func__, reset_bit); return response; } - - -EXPORT_SYMBOL_GPL(ezusb_writememory); EXPORT_SYMBOL_GPL(ezusb_set_reset); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b07d6a5cac..2569b68b83 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -12,29 +12,31 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com) * Upgrade to full working driver * * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. + * switched from using spinlock to a semaphore, which fixes lots of + * problems. * * (04/08/2001) gb * Identify version on module load. - * + * * 2001_Mar_19 gkh - * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more + * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more * than once, and the got the proper usb_device_id table entries so * the driver works again. * * (11/01/2000) Adam J. Richter * usb_device_id table support - * + * * (10/05/2000) gkh * Fixed bug with urb->dev not being set properly, now that the usb * core needs it. - * + * * (10/03/2000) smd * firmware is improved to guard against crap sent to device * firmware now replies CMD_FAILURE on bad things @@ -52,9 +54,9 @@ * Fixed bug with port->minor that was found by Al Borchers * * (07/04/2000) gkh - * Added support for port settings. Baud rate can now be changed. Line signals - * are not transferred to and from the tty layer yet, but things seem to be - * working well now. + * Added support for port settings. Baud rate can now be changed. Line + * signals are not transferred to and from the tty layer yet, but things + * seem to be working well now. * * (05/04/2000) gkh * First cut at open and close commands. Data can flow through the ports at @@ -62,7 +64,7 @@ * * (03/26/2000) gkh * Split driver up into device specific pieces. - * + * */ #include @@ -75,7 +77,7 @@ #include #include #include -#include +#include #include #include #include @@ -125,7 +127,7 @@ static struct usb_device_id id_table_combined [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver whiteheat_driver = { .name = "whiteheat", @@ -136,26 +138,34 @@ static struct usb_driver whiteheat_driver = { }; /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ -static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id); -static int whiteheat_firmware_attach (struct usb_serial *serial); +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id); +static int whiteheat_firmware_attach(struct usb_serial *serial); /* function prototypes for the Connect Tech WhiteHEAT serial converter */ -static int whiteheat_attach (struct usb_serial *serial); -static void whiteheat_shutdown (struct usb_serial *serial); -static int whiteheat_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void whiteheat_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static int whiteheat_write (struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); -static int whiteheat_write_room (struct tty_struct *tty); -static int whiteheat_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg); -static void whiteheat_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old); -static int whiteheat_tiocmget (struct tty_struct *tty, struct file *file); -static int whiteheat_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static void whiteheat_break_ctl (struct tty_struct *tty, int break_state); -static int whiteheat_chars_in_buffer (struct tty_struct *tty); -static void whiteheat_throttle (struct tty_struct *tty); -static void whiteheat_unthrottle (struct tty_struct *tty); -static void whiteheat_read_callback (struct urb *urb); -static void whiteheat_write_callback (struct urb *urb); +static int whiteheat_attach(struct usb_serial *serial); +static void whiteheat_shutdown(struct usb_serial *serial); +static int whiteheat_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void whiteheat_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static int whiteheat_write(struct tty_struct *tty, + struct usb_serial_port *port, + const unsigned char *buf, int count); +static int whiteheat_write_room(struct tty_struct *tty); +static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file); +static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); +static int whiteheat_chars_in_buffer(struct tty_struct *tty); +static void whiteheat_throttle(struct tty_struct *tty); +static void whiteheat_unthrottle(struct tty_struct *tty); +static void whiteheat_read_callback(struct urb *urb); +static void whiteheat_write_callback(struct urb *urb); static struct usb_serial_driver whiteheat_fake_device = { .driver = { @@ -202,7 +212,9 @@ struct whiteheat_command_private { struct mutex mutex; __u8 port_running; __u8 command_finished; - wait_queue_head_t wait_command; /* for handling sleeping while waiting for a command to finish */ + wait_queue_head_t wait_command; /* for handling sleeping whilst + waiting for a command to + finish */ __u8 result_buffer[64]; }; @@ -239,11 +251,13 @@ static void command_port_write_callback(struct urb *urb); static void command_port_read_callback(struct urb *urb); static int start_port_read(struct usb_serial_port *port); -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head); +static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, + struct list_head *head); static struct list_head *list_first(struct list_head *head); static void rx_data_softint(struct work_struct *work); -static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize); +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize); static int firm_open(struct usb_serial_port *port); static int firm_close(struct usb_serial_port *port); static int firm_setup_port(struct tty_struct *tty); @@ -278,7 +292,8 @@ static int firm_report_tx_done(struct usb_serial_port *port); - device renumerated itself and comes up as new device id with all firmware download completed. */ -static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id) +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id) { int response, ret = -ENOENT; const struct firmware *loader_fw = NULL, *firmware_fw = NULL; @@ -313,7 +328,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct record = ihex_next_binrec(record); } - response = ezusb_set_reset (serial, 0); + response = ezusb_set_reset(serial, 0); record = (const struct ihex_binrec *)firmware_fw->data; while (record && be32_to_cpu(record->addr) < 0x1b40) @@ -330,8 +345,8 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct } ++record; } - - response = ezusb_set_reset (serial, 1); + + response = ezusb_set_reset(serial, 1); record = (const struct ihex_binrec *)firmware_fw->data; while (record && be32_to_cpu(record->addr) < 0x1b40) { @@ -355,7 +370,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct } -static int whiteheat_firmware_attach (struct usb_serial *serial) +static int whiteheat_firmware_attach(struct usb_serial *serial) { /* We want this device to fail to have a driver assigned to it */ return 1; @@ -365,7 +380,7 @@ static int whiteheat_firmware_attach (struct usb_serial *serial) /***************************************************************************** * Connect Tech's White Heat serial driver functions *****************************************************************************/ -static int whiteheat_attach (struct usb_serial *serial) +static int whiteheat_attach(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; @@ -386,43 +401,52 @@ static int whiteheat_attach (struct usb_serial *serial) command_port = serial->port[COMMAND_PORT]; - pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress); + pipe = usb_sndbulkpipe(serial->dev, + command_port->bulk_out_endpointAddress); command = kmalloc(2, GFP_KERNEL); if (!command) goto no_command_buffer; command[0] = WHITEHEAT_GET_HW_INFO; command[1] = 0; - + result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); if (!result) goto no_result_buffer; /* * When the module is reloaded the firmware is still there and * the endpoints are still in the usb core unchanged. This is the - * unlinking bug in disguise. Same for the call below. - */ + * unlinking bug in disguise. Same for the call below. + */ usb_clear_halt(serial->dev, pipe); - ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); + ret = usb_bulk_msg(serial->dev, pipe, command, 2, + &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't send command [%d]", serial->type->description, ret); + err("%s: Couldn't send command [%d]", + serial->type->description, ret); goto no_firmware; } else if (alen != 2) { - err("%s: Send command incomplete [%d]", serial->type->description, alen); + err("%s: Send command incomplete [%d]", + serial->type->description, alen); goto no_firmware; } - pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress); + pipe = usb_rcvbulkpipe(serial->dev, + command_port->bulk_in_endpointAddress); /* See the comment on the usb_clear_halt() above */ usb_clear_halt(serial->dev, pipe); - ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); + ret = usb_bulk_msg(serial->dev, pipe, result, + sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't get results [%d]", serial->type->description, ret); + err("%s: Couldn't get results [%d]", + serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(*hw_info) + 1) { - err("%s: Get results incomplete [%d]", serial->type->description, alen); + err("%s: Get results incomplete [%d]", + serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { - err("%s: Command failed [%d]", serial->type->description, result[0]); + err("%s: Command failed [%d]", + serial->type->description, result[0]); goto no_firmware; } @@ -436,7 +460,8 @@ static int whiteheat_attach (struct usb_serial *serial) info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); if (info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->description); + err("%s: Out of memory for port structures\n", + serial->type->description); goto no_private; } @@ -506,9 +531,11 @@ static int whiteheat_attach (struct usb_serial *serial) usb_set_serial_port_data(port, info); } - command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); + command_info = kmalloc(sizeof(struct whiteheat_command_private), + GFP_KERNEL); if (command_info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->description); + err("%s: Out of memory for port structures\n", + serial->type->description); goto no_command_private; } @@ -525,9 +552,12 @@ static int whiteheat_attach (struct usb_serial *serial) no_firmware: /* Firmware likely not running */ - err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); - err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); - err("%s: please contact support@connecttech.com\n", serial->type->description); + err("%s: Unable to retrieve firmware version, try replugging\n", + serial->type->description); + err("%s: If the firmware is not running (status led not blinking)\n", + serial->type->description); + err("%s: please contact support@connecttech.com\n", + serial->type->description); kfree(result); return -ENODEV; @@ -570,7 +600,7 @@ no_command_buffer: } -static void whiteheat_shutdown (struct usb_serial *serial) +static void whiteheat_shutdown(struct usb_serial *serial) { struct usb_serial_port *command_port; struct usb_serial_port *port; @@ -585,7 +615,7 @@ static void whiteheat_shutdown (struct usb_serial *serial) /* free up our private data for our command port */ command_port = serial->port[COMMAND_PORT]; - kfree (usb_get_serial_port_data(command_port)); + kfree(usb_get_serial_port_data(command_port)); for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; @@ -612,8 +642,7 @@ static void whiteheat_shutdown (struct usb_serial *serial) return; } - -static int whiteheat_open (struct tty_struct *tty, +static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { int retval = 0; @@ -655,7 +684,8 @@ static int whiteheat_open (struct tty_struct *tty, /* Start reading from the device */ retval = start_port_read(port); if (retval) { - err("%s - failed submitting read urb, error %d", __func__, retval); + err("%s - failed submitting read urb, error %d", + __func__, retval); firm_close(port); stop_command_port(port->serial); goto exit; @@ -668,7 +698,7 @@ exit: static void whiteheat_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file * filp) + struct usb_serial_port *port, struct file *filp) { struct whiteheat_private *info = usb_get_serial_port_data(port); struct whiteheat_urb_wrap *wrap; @@ -769,16 +799,19 @@ static int whiteheat_write(struct tty_struct *tty, wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); urb = wrap->urb; - bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count; - memcpy (urb->transfer_buffer, buf + sent, bytes); + bytes = (count > port->bulk_out_size) ? + port->bulk_out_size : count; + memcpy(urb->transfer_buffer, buf + sent, bytes); - usb_serial_debug_data(debug, &port->dev, __func__, bytes, urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, + __func__, bytes, urb->transfer_buffer); urb->dev = serial->dev; urb->transfer_buffer_length = bytes; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __func__, result); + err("%s - failed submitting write urb, error %d", + __func__, result); sent = result; spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->tx_urbs_free); @@ -796,7 +829,6 @@ static int whiteheat_write(struct tty_struct *tty, return sent; } - static int whiteheat_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -806,7 +838,7 @@ static int whiteheat_write_room(struct tty_struct *tty) unsigned long flags; dbg("%s - port %d", __func__, port->number); - + spin_lock_irqsave(&info->lock, flags); list_for_each(tmp, &info->tx_urbs_free) room++; @@ -817,8 +849,7 @@ static int whiteheat_write_room(struct tty_struct *tty) return (room); } - -static int whiteheat_tiocmget (struct tty_struct *tty, struct file *file) +static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); @@ -835,8 +866,7 @@ static int whiteheat_tiocmget (struct tty_struct *tty, struct file *file) return modem_signals; } - -static int whiteheat_tiocmset (struct tty_struct *tty, struct file *file, +static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -860,7 +890,8 @@ static int whiteheat_tiocmset (struct tty_struct *tty, struct file *file, } -static int whiteheat_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) +static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct serial_struct serstruct; @@ -869,50 +900,38 @@ static int whiteheat_ioctl (struct tty_struct *tty, struct file * file, unsigned dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); switch (cmd) { - case TIOCGSERIAL: - memset(&serstruct, 0, sizeof(serstruct)); - serstruct.type = PORT_16654; - serstruct.line = port->serial->minor; - serstruct.port = port->number; - serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - serstruct.xmit_fifo_size = port->bulk_out_size; - serstruct.custom_divisor = 0; - serstruct.baud_base = 460800; - serstruct.close_delay = CLOSING_DELAY; - serstruct.closing_wait = CLOSING_DELAY; - - if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) - return -EFAULT; - - break; - - case TIOCSSERIAL: - if (copy_from_user(&serstruct, user_arg, sizeof(serstruct))) - return -EFAULT; - - /* - * For now this is ignored. dip sets the ASYNC_[V]HI flags - * but this isn't used by us at all. Maybe someone somewhere - * will need the custom_divisor setting. - */ - - break; - - default: - break; + case TIOCGSERIAL: + memset(&serstruct, 0, sizeof(serstruct)); + serstruct.type = PORT_16654; + serstruct.line = port->serial->minor; + serstruct.port = port->number; + serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + serstruct.xmit_fifo_size = port->bulk_out_size; + serstruct.custom_divisor = 0; + serstruct.baud_base = 460800; + serstruct.close_delay = CLOSING_DELAY; + serstruct.closing_wait = CLOSING_DELAY; + + if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) + return -EFAULT; + break; + default: + break; } return -ENOIOCTLCMD; } -static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { + /* FIXME */ firm_setup_port(tty); } - -static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) { +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) +{ struct usb_serial_port *port = tty->driver_data; firm_set_break(port, break_state); } @@ -936,12 +955,12 @@ static int whiteheat_chars_in_buffer(struct tty_struct *tty) } spin_unlock_irqrestore(&info->lock, flags); - dbg ("%s - returns %d", __func__, chars); + dbg("%s - returns %d", __func__, chars); return chars; } -static void whiteheat_throttle (struct tty_struct *tty) +static void whiteheat_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); @@ -957,7 +976,7 @@ static void whiteheat_throttle (struct tty_struct *tty) } -static void whiteheat_unthrottle (struct tty_struct *tty) +static void whiteheat_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); @@ -1006,7 +1025,7 @@ static void command_port_read_callback(struct urb *urb) command_info = usb_get_serial_port_data(command_port); if (!command_info) { - dbg ("%s - command_info is NULL, exiting.", __func__); + dbg("%s - command_info is NULL, exiting.", __func__); return; } if (status) { @@ -1017,7 +1036,8 @@ static void command_port_read_callback(struct urb *urb) return; } - usb_serial_debug_data(debug, &command_port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &command_port->dev, + __func__, urb->actual_length, data); if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; @@ -1026,21 +1046,23 @@ static void command_port_read_callback(struct urb *urb) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); } else if (data[0] == WHITEHEAT_EVENT) { - /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ + /* These are unsolicited reports from the firmware, hence no + waiting command to wakeup */ dbg("%s - event received", __func__); } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { - memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); + memcpy(command_info->result_buffer, &data[1], + urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); - } else { + } else dbg("%s - bad reply from firmware", __func__); - } - + /* Continue trying to always read */ command_port->read_urb->dev = command_port->serial->dev; result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); if (result) - dbg("%s - failed resubmitting read urb, error %d", __func__, result); + dbg("%s - failed resubmitting read urb, error %d", + __func__, result); } @@ -1073,7 +1095,8 @@ static void whiteheat_read_callback(struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, + __func__, urb->actual_length, data); spin_lock(&info->lock); list_add_tail(&wrap->list, &info->rx_urb_q); @@ -1120,7 +1143,8 @@ static void whiteheat_write_callback(struct urb *urb) /***************************************************************************** * Connect Tech's White Heat firmware interface *****************************************************************************/ -static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize) +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; @@ -1135,13 +1159,13 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d command_info = usb_get_serial_port_data(command_port); mutex_lock(&command_info->mutex); command_info->command_finished = false; - + transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; transfer_buffer[0] = command; - memcpy (&transfer_buffer[1], data, datasize); + memcpy(&transfer_buffer[1], data, datasize); command_port->write_urb->transfer_buffer_length = datasize + 1; command_port->write_urb->dev = port->serial->dev; - retval = usb_submit_urb (command_port->write_urb, GFP_NOIO); + retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); if (retval) { dbg("%s - submit urb failed", __func__); goto exit; @@ -1168,36 +1192,41 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { dbg("%s - command completed.", __func__); switch (command) { - case WHITEHEAT_GET_DTR_RTS: - info = usb_get_serial_port_data(port); - memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info)); + case WHITEHEAT_GET_DTR_RTS: + info = usb_get_serial_port_data(port); + memcpy(&info->mcr, command_info->result_buffer, + sizeof(struct whiteheat_dr_info)); break; } } - exit: mutex_unlock(&command_info->mutex); return retval; } -static int firm_open(struct usb_serial_port *port) { +static int firm_open(struct usb_serial_port *port) +{ struct whiteheat_simple open_command; open_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command)); + return firm_send_command(port, WHITEHEAT_OPEN, + (__u8 *)&open_command, sizeof(open_command)); } -static int firm_close(struct usb_serial_port *port) { +static int firm_close(struct usb_serial_port *port) +{ struct whiteheat_simple close_command; close_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command)); + return firm_send_command(port, WHITEHEAT_CLOSE, + (__u8 *)&close_command, sizeof(close_command)); } -static int firm_setup_port(struct tty_struct *tty) { +static int firm_setup_port(struct tty_struct *tty) +{ struct usb_serial_port *port = tty->driver_data; struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios->c_cflag; @@ -1206,14 +1235,14 @@ static int firm_setup_port(struct tty_struct *tty) { /* get the byte size */ switch (cflag & CSIZE) { - case CS5: port_settings.bits = 5; break; - case CS6: port_settings.bits = 6; break; - case CS7: port_settings.bits = 7; break; - default: - case CS8: port_settings.bits = 8; break; + case CS5: port_settings.bits = 5; break; + case CS6: port_settings.bits = 6; break; + case CS7: port_settings.bits = 7; break; + default: + case CS8: port_settings.bits = 8; break; } dbg("%s - data bits = %d", __func__, port_settings.bits); - + /* determine the parity */ if (cflag & PARENB) if (cflag & CMSPAR) @@ -1239,7 +1268,8 @@ static int firm_setup_port(struct tty_struct *tty) { /* figure out the flow control settings */ if (cflag & CRTSCTS) - port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS); + port_settings.hflow = (WHITEHEAT_HFLOW_CTS | + WHITEHEAT_HFLOW_RTS); else port_settings.hflow = WHITEHEAT_HFLOW_NONE; dbg("%s - hardware flow control = %s %s %s %s", __func__, @@ -1247,17 +1277,18 @@ static int firm_setup_port(struct tty_struct *tty) { (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); - + /* determine software flow control */ if (I_IXOFF(tty)) port_settings.sflow = WHITEHEAT_SFLOW_RXTX; else port_settings.sflow = WHITEHEAT_SFLOW_NONE; dbg("%s - software flow control = %c", __func__, port_settings.sflow); - + port_settings.xon = START_CHAR(tty); port_settings.xoff = STOP_CHAR(tty); - dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff); + dbg("%s - XON = %2x, XOFF = %2x", + __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ port_settings.baud = tty_get_baud_rate(tty); @@ -1267,61 +1298,74 @@ static int firm_setup_port(struct tty_struct *tty) { tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); /* handle any settings that aren't specified in the tty structure */ port_settings.lloop = 0; - + /* now send the message to the device */ - return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings)); + return firm_send_command(port, WHITEHEAT_SETUP_PORT, + (__u8 *)&port_settings, sizeof(port_settings)); } -static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) { +static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) +{ struct whiteheat_set_rdb rts_command; rts_command.port = port->number - port->serial->minor + 1; rts_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command)); + return firm_send_command(port, WHITEHEAT_SET_RTS, + (__u8 *)&rts_command, sizeof(rts_command)); } -static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) { +static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) +{ struct whiteheat_set_rdb dtr_command; dtr_command.port = port->number - port->serial->minor + 1; dtr_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command)); + return firm_send_command(port, WHITEHEAT_SET_RTS, + (__u8 *)&dtr_command, sizeof(dtr_command)); } -static int firm_set_break(struct usb_serial_port *port, __u8 onoff) { +static int firm_set_break(struct usb_serial_port *port, __u8 onoff) +{ struct whiteheat_set_rdb break_command; break_command.port = port->number - port->serial->minor + 1; break_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command)); + return firm_send_command(port, WHITEHEAT_SET_RTS, + (__u8 *)&break_command, sizeof(break_command)); } -static int firm_purge(struct usb_serial_port *port, __u8 rxtx) { +static int firm_purge(struct usb_serial_port *port, __u8 rxtx) +{ struct whiteheat_purge purge_command; purge_command.port = port->number - port->serial->minor + 1; purge_command.what = rxtx; - return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command)); + return firm_send_command(port, WHITEHEAT_PURGE, + (__u8 *)&purge_command, sizeof(purge_command)); } -static int firm_get_dtr_rts(struct usb_serial_port *port) { +static int firm_get_dtr_rts(struct usb_serial_port *port) +{ struct whiteheat_simple get_dr_command; get_dr_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command)); + return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, + (__u8 *)&get_dr_command, sizeof(get_dr_command)); } -static int firm_report_tx_done(struct usb_serial_port *port) { +static int firm_report_tx_done(struct usb_serial_port *port) +{ struct whiteheat_simple close_command; close_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command)); + return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, + (__u8 *)&close_command, sizeof(close_command)); } @@ -1333,7 +1377,7 @@ static int start_command_port(struct usb_serial *serial) struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; int retval = 0; - + command_port = serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); mutex_lock(&command_info->mutex); @@ -1344,7 +1388,8 @@ static int start_command_port(struct usb_serial *serial) command_port->read_urb->dev = serial->dev; retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); if (retval) { - err("%s - failed submitting read urb, error %d", __func__, retval); + err("%s - failed submitting read urb, error %d", + __func__, retval); goto exit; } } @@ -1414,7 +1459,8 @@ static int start_port_read(struct usb_serial_port *port) } -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head) +static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, + struct list_head *head) { struct whiteheat_urb_wrap *wrap; struct list_head *tmp; @@ -1463,7 +1509,8 @@ static void rx_data_softint(struct work_struct *work) urb = wrap->urb; if (tty && urb->actual_length) { - int len = tty_buffer_request_room(tty, urb->actual_length); + int len = tty_buffer_request_room(tty, + urb->actual_length); /* This stuff can go away now I suspect */ if (unlikely(len < urb->actual_length)) { spin_lock_irqsave(&info->lock, flags); @@ -1480,7 +1527,8 @@ static void rx_data_softint(struct work_struct *work) urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed resubmitting read urb, error %d", __func__, result); + err("%s - failed resubmitting read urb, error %d", + __func__, result); spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->rx_urbs_free); continue; @@ -1499,7 +1547,7 @@ static void rx_data_softint(struct work_struct *work) /***************************************************************************** * Connect Tech's White Heat module functions *****************************************************************************/ -static int __init whiteheat_init (void) +static int __init whiteheat_init(void) { int retval; retval = usb_serial_register(&whiteheat_fake_device); @@ -1522,19 +1570,19 @@ failed_fake_register: } -static void __exit whiteheat_exit (void) +static void __exit whiteheat_exit(void) { - usb_deregister (&whiteheat_driver); - usb_serial_deregister (&whiteheat_fake_device); - usb_serial_deregister (&whiteheat_device); + usb_deregister(&whiteheat_driver); + usb_serial_deregister(&whiteheat_fake_device); + usb_serial_deregister(&whiteheat_device); } module_init(whiteheat_init); module_exit(whiteheat_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("whiteheat.fw"); diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h index f160797056..38065df4d2 100644 --- a/drivers/usb/serial/whiteheat.h +++ b/drivers/usb/serial/whiteheat.h @@ -2,7 +2,7 @@ * USB ConnectTech WhiteHEAT driver * * Copyright (C) 2002 - * Connect Tech Inc. + * Connect Tech Inc. * * Copyright (C) 1999, 2000 * Greg Kroah-Hartman (greg@kroah.com) @@ -12,7 +12,8 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * */ @@ -30,13 +31,16 @@ #define WHITEHEAT_DUMP 7 /* dump memory */ #define WHITEHEAT_STATUS 8 /* get status */ #define WHITEHEAT_PURGE 9 /* clear the UART fifos */ -#define WHITEHEAT_GET_DTR_RTS 10 /* get the state of DTR and RTS for a port */ -#define WHITEHEAT_GET_HW_INFO 11 /* get EEPROM info and hardware ID */ +#define WHITEHEAT_GET_DTR_RTS 10 /* get the state of DTR and RTS + for a port */ +#define WHITEHEAT_GET_HW_INFO 11 /* get EEPROM info and + hardware ID */ #define WHITEHEAT_REPORT_TX_DONE 12 /* get the next TX done */ #define WHITEHEAT_EVENT 13 /* unsolicited status events */ -#define WHITEHEAT_ECHO 14 /* send data to the indicated IN endpoint */ -#define WHITEHEAT_DO_TEST 15 /* perform the specified test */ -#define WHITEHEAT_CMD_COMPLETE 16 /* reply for certain commands */ +#define WHITEHEAT_ECHO 14 /* send data to the indicated + IN endpoint */ +#define WHITEHEAT_DO_TEST 15 /* perform specified test */ +#define WHITEHEAT_CMD_COMPLETE 16 /* reply for some commands */ #define WHITEHEAT_CMD_FAILURE 17 /* reply for failed commands */ @@ -67,20 +71,28 @@ struct whiteheat_simple { #define WHITEHEAT_PAR_MARK '1' /* mark (force 1) parity */ #define WHITEHEAT_SFLOW_NONE 'n' /* no software flow control */ -#define WHITEHEAT_SFLOW_RX 'r' /* XOFF/ON is sent when RX fills/empties */ -#define WHITEHEAT_SFLOW_TX 't' /* when received XOFF/ON will stop/start TX */ +#define WHITEHEAT_SFLOW_RX 'r' /* XOFF/ON is sent when RX + fills/empties */ +#define WHITEHEAT_SFLOW_TX 't' /* when received XOFF/ON will + stop/start TX */ #define WHITEHEAT_SFLOW_RXTX 'b' /* both SFLOW_RX and SFLOW_TX */ #define WHITEHEAT_HFLOW_NONE 0x00 /* no hardware flow control */ -#define WHITEHEAT_HFLOW_RTS_TOGGLE 0x01 /* RTS is on during transmit, off otherwise */ -#define WHITEHEAT_HFLOW_DTR 0x02 /* DTR is off/on when RX fills/empties */ -#define WHITEHEAT_HFLOW_CTS 0x08 /* when received CTS off/on will stop/start TX */ -#define WHITEHEAT_HFLOW_DSR 0x10 /* when received DSR off/on will stop/start TX */ -#define WHITEHEAT_HFLOW_RTS 0x80 /* RTS is off/on when RX fills/empties */ +#define WHITEHEAT_HFLOW_RTS_TOGGLE 0x01 /* RTS is on during transmit, + off otherwise */ +#define WHITEHEAT_HFLOW_DTR 0x02 /* DTR is off/on when RX + fills/empties */ +#define WHITEHEAT_HFLOW_CTS 0x08 /* when received CTS off/on + will stop/start TX */ +#define WHITEHEAT_HFLOW_DSR 0x10 /* when received DSR off/on + will stop/start TX */ +#define WHITEHEAT_HFLOW_RTS 0x80 /* RTS is off/on when RX + fills/empties */ struct whiteheat_port_settings { __u8 port; /* port number (1 to N) */ - __u32 baud; /* any value 7 - 460800, firmware calculates best fit; arrives little endian */ + __u32 baud; /* any value 7 - 460800, firmware calculates + best fit; arrives little endian */ __u8 bits; /* 5, 6, 7, or 8 */ __u8 stop; /* 1 or 2, default 1 (2 = 1.5 if bits = 5) */ __u8 parity; /* see WHITEHEAT_PAR_* above */ @@ -167,12 +179,14 @@ struct whiteheat_echo { */ #define WHITEHEAT_TEST_UART_RW 0x01 /* read/write uart registers */ #define WHITEHEAT_TEST_UART_INTR 0x02 /* uart interrupt */ -#define WHITEHEAT_TEST_SETUP_CONT 0x03 /* setup for PORT_CONT/PORT_DISCONT */ +#define WHITEHEAT_TEST_SETUP_CONT 0x03 /* setup for + PORT_CONT/PORT_DISCONT */ #define WHITEHEAT_TEST_PORT_CONT 0x04 /* port connect */ #define WHITEHEAT_TEST_PORT_DISCONT 0x05 /* port disconnect */ #define WHITEHEAT_TEST_UART_CLK_START 0x06 /* uart clock test start */ #define WHITEHEAT_TEST_UART_CLK_STOP 0x07 /* uart clock test stop */ -#define WHITEHEAT_TEST_MODEM_FT 0x08 /* modem signals, requires a loopback cable/connector */ +#define WHITEHEAT_TEST_MODEM_FT 0x08 /* modem signals, requires a + loopback cable/connector */ #define WHITEHEAT_TEST_ERASE_EEPROM 0x09 /* erase eeprom */ #define WHITEHEAT_TEST_READ_EEPROM 0x0a /* read eeprom */ #define WHITEHEAT_TEST_PROGRAM_EEPROM 0x0b /* program eeprom */ @@ -198,19 +212,27 @@ struct whiteheat_test { #define WHITEHEAT_EVENT_CONNECT 0x08 /* connect field is valid */ #define WHITEHEAT_FLOW_NONE 0x00 /* no flow control active */ -#define WHITEHEAT_FLOW_HARD_OUT 0x01 /* TX is stopped by CTS (waiting for CTS to go on) */ -#define WHITEHEAT_FLOW_HARD_IN 0x02 /* remote TX is stopped by RTS */ -#define WHITEHEAT_FLOW_SOFT_OUT 0x04 /* TX is stopped by XOFF received (waiting for XON) */ -#define WHITEHEAT_FLOW_SOFT_IN 0x08 /* remote TX is stopped by XOFF transmitted */ +#define WHITEHEAT_FLOW_HARD_OUT 0x01 /* TX is stopped by CTS + (waiting for CTS to go on) */ +#define WHITEHEAT_FLOW_HARD_IN 0x02 /* remote TX is stopped + by RTS */ +#define WHITEHEAT_FLOW_SOFT_OUT 0x04 /* TX is stopped by XOFF + received (waiting for XON) */ +#define WHITEHEAT_FLOW_SOFT_IN 0x08 /* remote TX is stopped by XOFF + transmitted */ #define WHITEHEAT_FLOW_TX_DONE 0x80 /* TX has completed */ struct whiteheat_status_info { __u8 port; /* port number (1 to N) */ - __u8 event; /* indicates what the current event is, see WHITEHEAT_EVENT_* above */ - __u8 modem; /* modem signal status (copy of uart's MSR register) */ + __u8 event; /* indicates what the current event is, + see WHITEHEAT_EVENT_* above */ + __u8 modem; /* modem signal status (copy of uart's + MSR register) */ __u8 error; /* line status (copy of uart's LSR register) */ - __u8 flow; /* flow control state, see WHITEHEAT_FLOW_* above */ - __u8 connect; /* 0 means not connected, non-zero means connected */ + __u8 flow; /* flow control state, see WHITEHEAT_FLOW_* + above */ + __u8 connect; /* 0 means not connected, non-zero means + connected */ }; @@ -256,7 +278,8 @@ struct whiteheat_hw_info { struct whiteheat_event_info { __u8 port; /* port number (1 to N) */ __u8 event; /* see whiteheat_status_info.event */ - __u8 info; /* see whiteheat_status_info.modem, .error, .flow, .connect */ + __u8 info; /* see whiteheat_status_info.modem, .error, + .flow, .connect */ }; @@ -269,7 +292,8 @@ struct whiteheat_event_info { struct whiteheat_test_info { __u8 port; /* port number (1 to N) */ - __u8 test; /* indicates which test this is a response for, see WHITEHEAT_DO_TEST above */ + __u8 test; /* indicates which test this is a response for, + see WHITEHEAT_DO_TEST above */ __u8 status; /* see WHITEHEAT_TEST_* above */ __u8 results[32]; /* test-dependent results */ }; -- 2.39.5