From 7fdc7849d2f9f926cbaec224bbcbacb164b07b23 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Wed, 9 May 2007 21:41:03 +0100 Subject: [PATCH] [ARM] 4359/3: H1940: Add bluetooth support This patch adds a small driver responsible for configuring the UART used for the bluetooth chip and for enabling the bluetooth chipset. Additionnaly, can trigger a led if the H1940 led driver is enabled. Signed-off-by: Arnaud Patard Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Makefile | 2 +- arch/arm/mach-s3c2410/h1940-bluetooth.c | 142 ++++++++++++++++++++++++ arch/arm/mach-s3c2410/mach-h1940.c | 6 + 3 files changed, 149 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-s3c2410/h1940-bluetooth.c diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 9a3d3d24c0..3e7a85594d 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_S3C2410_CLOCK) += clock.o # Machine support obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o -obj-$(CONFIG_ARCH_H1940) += mach-h1940.o +obj-$(CONFIG_ARCH_H1940) += mach-h1940.o h1940-bluetooth.o obj-$(CONFIG_PM_H1940) += pm-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c new file mode 100644 index 0000000000..3c48886521 --- /dev/null +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -0,0 +1,142 @@ +/* + * arch/arm/mach-s3c2410/h1940-bluetooth.c + * Copyright (c) Arnaud Patard + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * S3C2410 bluetooth "driver" + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "h1940-bt" + +#ifdef CONFIG_LEDS_H1940 +DEFINE_LED_TRIGGER(bt_led_trigger); +#endif + +static int state; + +/* Bluetooth control */ +static void h1940bt_enable(int on) +{ + if (on) { +#ifdef CONFIG_LEDS_H1940 + /* flashing Blue */ + led_trigger_event(bt_led_trigger, LED_HALF); +#endif + + /* Power on the chip */ + h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); + /* Reset the chip */ + mdelay(10); + s3c2410_gpio_setpin(S3C2410_GPH1, 1); + mdelay(10); + s3c2410_gpio_setpin(S3C2410_GPH1, 0); + + state = 1; + } + else { +#ifdef CONFIG_LEDS_H1940 + led_trigger_event(bt_led_trigger, 0); +#endif + + s3c2410_gpio_setpin(S3C2410_GPH1, 1); + mdelay(10); + s3c2410_gpio_setpin(S3C2410_GPH1, 0); + mdelay(10); + h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); + + state = 0; + } +} + +static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", state); +} + +static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + int new_state; + char *endp; + + new_state = simple_strtoul(buf, &endp, 0); + if (*endp && !isspace(*endp)) + return -EINVAL; + + h1940bt_enable(new_state); + + return count; +} +static DEVICE_ATTR(enable, 0644, + h1940bt_show, + h1940bt_store); + +static int __init h1940bt_probe(struct platform_device *pdev) +{ + /* Configures BT serial port GPIOs */ + s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0); + s3c2410_gpio_pullup(S3C2410_GPH0, 1); + s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP); + s3c2410_gpio_pullup(S3C2410_GPH1, 1); + s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0); + s3c2410_gpio_pullup(S3C2410_GPH2, 1); + s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0); + s3c2410_gpio_pullup(S3C2410_GPH3, 1); + +#ifdef CONFIG_LEDS_H1940 + led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger); +#endif + + /* disable BT by default */ + h1940bt_enable(0); + + return device_create_file(&pdev->dev, &dev_attr_enable); +} + +static int h1940bt_remove(struct platform_device *pdev) +{ +#ifdef CONFIG_LEDS_H1940 + led_trigger_unregister_simple(bt_led_trigger); +#endif + return 0; +} + + +static struct platform_driver h1940bt_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = h1940bt_probe, + .remove = h1940bt_remove, +}; + + +static int __init h1940bt_init(void) +{ + return platform_driver_register(&h1940bt_driver); +} + +static void __exit h1940bt_exit(void) +{ + platform_driver_unregister(&h1940bt_driver); +} + +module_init(h1940bt_init); +module_exit(h1940bt_exit); + +MODULE_AUTHOR("Arnaud Patard "); +MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 5d5f00e9c4..5ccd0be23a 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -177,6 +177,11 @@ static struct platform_device s3c_device_leds = { .id = -1, }; +static struct platform_device s3c_device_bluetooth = { + .name = "h1940-bt", + .id = -1, +}; + static struct platform_device *h1940_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, @@ -185,6 +190,7 @@ static struct platform_device *h1940_devices[] __initdata = { &s3c_device_iis, &s3c_device_usbgadget, &s3c_device_leds, + &s3c_device_bluetooth, }; static void __init h1940_map_io(void) -- 2.39.5