From 7e1e7aed0ca082b4e76567ee7ea13993b476e66a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 14 Aug 2008 15:15:43 +0800 Subject: [PATCH] Blackfin arch: do not muck with the UART during boot -- let the serial driver worry about it Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/head.S | 36 ----------------------- arch/blackfin/mach-bf533/head.S | 48 ------------------------------ arch/blackfin/mach-bf537/head.S | 50 -------------------------------- arch/blackfin/mach-bf548/head.S | 10 ------- arch/blackfin/mach-bf561/head.S | 36 ----------------------- arch/blackfin/mach-common/head.S | 3 -- 6 files changed, 183 deletions(-) diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index fa4b18eddf..c3334cc5bc 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -35,42 +35,6 @@ #include #endif -.extern _bf53x_relocate_l1_mem - -__INIT - -ENTRY(_mach_early_start) - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART1_LCR); - p0.l = lo(UART1_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(UART1_DLL); - p0.l = lo(UART1_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(UART1_DLH); - p0.l = lo(UART1_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(UART1_GCTL); - p0.l = lo(UART1_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - rts; -ENDPROC(_mach_early_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 184296bee3..d59db86195 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -35,54 +35,6 @@ #include #endif -.extern _bf53x_relocate_l1_mem - -__INIT - -ENTRY(_mach_early_start) - p0.h = hi(FIO_MASKA_C); - p0.l = lo(FIO_MASKA_C); - r0 = 0xFFFF(Z); - w[p0] = r0.L; /* Disable all interrupts */ - ssync; - - p0.h = hi(FIO_MASKB_C); - p0.l = lo(FIO_MASKB_C); - r0 = 0xFFFF(Z); - w[p0] = r0.L; /* Disable all interrupts */ - ssync; - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - rts; -ENDPROC(_mach_early_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index ba81b77951..64e0287ab2 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -35,56 +35,6 @@ #include #endif -.extern _bf53x_relocate_l1_mem - -__INIT - -ENTRY(_mach_early_start) - /* Initialise General-Purpose I/O Modules on BF537 */ - p0.h = hi(BFIN_PORT_MUX); - p0.l = lo(BFIN_PORT_MUX); - R0 = (PGDE_UART | PFTE_UART)(Z); - W[P0] = R0.L; /* Enable both UARTS */ - SSYNC; - - /* Enable peripheral function of PORTF for UART0 and UART1 */ - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); - R0 = 0x000F(Z); - W[P0] = R0.L; - SSYNC; - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - rts; -ENDPROC(_mach_early_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 0b18196df8..e3000f70a2 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -35,16 +35,6 @@ #include #endif -.extern _bf53x_relocate_l1_mem - -__INIT - -ENTRY(_mach_early_start) - rts; -ENDPROC(_mach_early_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index fe6f979947..c7a81e3470 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -35,42 +35,6 @@ #include #endif -.extern _bf53x_relocate_l1_mem - -__INIT - -ENTRY(_mach_early_start) - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - rts; -ENDPROC(_mach_early_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index fb7e2d4269..191b4e974c 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -96,9 +96,6 @@ ENTRY(__start) R0 = RETX; [P0] = R0; - /* Let each Blackfin family do its own thing */ - call _mach_early_start; - /* Initialize stack pointer */ sp.l = lo(INITIAL_STACK); sp.h = hi(INITIAL_STACK); -- 2.39.5