From 7c038749d1e6a2d5fb37ed14aed0fffa34c4e504 Mon Sep 17 00:00:00 2001 From: Mark Nutter Date: Tue, 15 Nov 2005 15:53:50 -0500 Subject: [PATCH] [PATCH] kernel-side context switch code for spufs This adds the code needed to perform a context switch from spufs, following the recommended 76-step sequence. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/switch.c | 2042 +++++++++++++++++++- include/asm-powerpc/spu_csa.h | 1 - 2 files changed, 2036 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 6804342e99..70345b0524 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -52,6 +52,2019 @@ #include "spu_save_dump.h" #include "spu_restore_dump.h" +#if 0 +#define POLL_WHILE_TRUE(_c) { \ + do { \ + } while (_c); \ + } +#else +#define RELAX_SPIN_COUNT 1000 +#define POLL_WHILE_TRUE(_c) { \ + do { \ + int _i; \ + for (_i=0; _iproblem; + u32 isolate_state; + + /* Save, Step 2: + * Save, Step 6: + * If SPU_Status[E,L,IS] any field is '1', this + * SPU is in isolate state and cannot be context + * saved at this time. + */ + isolate_state = SPU_STATUS_ISOLATED_STATE | + SPU_STATUS_ISOLATED_LOAD_STAUTUS | SPU_STATUS_ISOLATED_EXIT_STAUTUS; + return (in_be32(&prob->spu_status_R) & isolate_state) ? 1 : 0; +} + +static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Save, Step 3: + * Restore, Step 2: + * Save INT_Mask_class0 in CSA. + * Write INT_MASK_class0 with value of 0. + * Save INT_Mask_class1 in CSA. + * Write INT_MASK_class1 with value of 0. + * Save INT_Mask_class2 in CSA. + * Write INT_MASK_class2 with value of 0. + */ + spin_lock_irq(&spu->register_lock); + if (csa) { + csa->priv1.int_mask_class0_RW = + in_be64(&priv1->int_mask_class0_RW); + csa->priv1.int_mask_class1_RW = + in_be64(&priv1->int_mask_class1_RW); + csa->priv1.int_mask_class2_RW = + in_be64(&priv1->int_mask_class2_RW); + } + out_be64(&priv1->int_mask_class0_RW, 0UL); + out_be64(&priv1->int_mask_class1_RW, 0UL); + out_be64(&priv1->int_mask_class2_RW, 0UL); + eieio(); + spin_unlock_irq(&spu->register_lock); +} + +static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 4: + * Restore, Step 25. + * Set a software watchdog timer, which specifies the + * maximum allowable time for a context save sequence. + * + * For present, this implementation will not set a global + * watchdog timer, as virtualization & variable system load + * may cause unpredictable execution times. + */ +} + +static inline void inhibit_user_access(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 5: + * Restore, Step 3: + * Inhibit user-space access (if provided) to this + * SPU by unmapping the virtual pages assigned to + * the SPU memory-mapped I/O (MMIO) for problem + * state. TBD. + */ +} + +static inline void set_switch_pending(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 7: + * Restore, Step 5: + * Set a software context switch pending flag. + */ + set_bit(SPU_CONTEXT_SWITCH_PENDING_nr, &spu->flags); + mb(); +} + +static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 8: + * Read and save MFC_CNTL[Ss]. + */ + if (csa) { + csa->priv2.mfc_control_RW = in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_SUSPEND_DMA_STATUS_MASK; + } +} + +static inline void save_spu_runcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 9: + * Save SPU_Runcntl in the CSA. This value contains + * the "Application Desired State". + */ + csa->prob.spu_runcntl_RW = in_be32(&prob->spu_runcntl_RW); +} + +static inline void save_mfc_sr1(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Save, Step 10: + * Save MFC_SR1 in the CSA. + */ + csa->priv1.mfc_sr1_RW = in_be64(&priv1->mfc_sr1_RW); +} + +static inline void save_spu_status(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 11: + * Read SPU_Status[R], and save to CSA. + */ + if ((in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) == 0) { + csa->prob.spu_status_R = in_be32(&prob->spu_status_R); + } else { + u32 stopped; + + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + stopped = + SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; + if ((in_be32(&prob->spu_status_R) & stopped) == 0) + csa->prob.spu_status_R = SPU_STATUS_RUNNING; + else + csa->prob.spu_status_R = in_be32(&prob->spu_status_R); + } +} + +static inline void save_mfc_decr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 12: + * Read MFC_CNTL[Ds]. Update saved copy of + * CSA.MFC_CNTL[Ds]. + */ + if (in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DECREMENTER_RUNNING) { + csa->priv2.mfc_control_RW |= MFC_CNTL_DECREMENTER_RUNNING; + csa->suspend_time = get_cycles(); + out_be64(&priv2->spu_chnlcntptr_RW, 7ULL); + eieio(); + csa->spu_chnldata_RW[7] = in_be64(&priv2->spu_chnldata_RW); + eieio(); + } +} + +static inline void halt_mfc_decr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 13: + * Write MFC_CNTL[Dh] set to a '1' to halt + * the decrementer. + */ + out_be64(&priv2->mfc_control_RW, MFC_CNTL_DECREMENTER_HALTED); + eieio(); +} + +static inline void save_timebase(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 14: + * Read PPE Timebase High and Timebase low registers + * and save in CSA. TBD. + */ + csa->suspend_time = get_cycles(); +} + +static inline void remove_other_spu_access(struct spu_state *csa, + struct spu *spu) +{ + /* Save, Step 15: + * Remove other SPU access to this SPU by unmapping + * this SPU's pages from their address space. TBD. + */ +} + +static inline void do_mfc_mssync(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 16: + * Restore, Step 11. + * Write SPU_MSSync register. Poll SPU_MSSync[P] + * for a value of 0. + */ + out_be64(&prob->spc_mssync_RW, 1UL); + POLL_WHILE_TRUE(in_be64(&prob->spc_mssync_RW) & MS_SYNC_PENDING); +} + +static inline void issue_mfc_tlbie(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Save, Step 17: + * Restore, Step 12. + * Restore, Step 48. + * Write TLB_Invalidate_Entry[IS,VPN,L,Lp]=0 register. + * Then issue a PPE sync instruction. + */ + out_be64(&priv1->tlb_invalidate_entry_W, 0UL); + mb(); +} + +static inline void handle_pending_interrupts(struct spu_state *csa, + struct spu *spu) +{ + /* Save, Step 18: + * Handle any pending interrupts from this SPU + * here. This is OS or hypervisor specific. One + * option is to re-enable interrupts to handle any + * pending interrupts, with the interrupt handlers + * recognizing the software Context Switch Pending + * flag, to ensure the SPU execution or MFC command + * queue is not restarted. TBD. + */ +} + +static inline void save_mfc_queues(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Save, Step 19: + * If MFC_Cntl[Se]=0 then save + * MFC command queues. + */ + if ((in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DMA_QUEUES_EMPTY) == 0) { + for (i = 0; i < 8; i++) { + csa->priv2.puq[i].mfc_cq_data0_RW = + in_be64(&priv2->puq[i].mfc_cq_data0_RW); + csa->priv2.puq[i].mfc_cq_data1_RW = + in_be64(&priv2->puq[i].mfc_cq_data1_RW); + csa->priv2.puq[i].mfc_cq_data2_RW = + in_be64(&priv2->puq[i].mfc_cq_data2_RW); + csa->priv2.puq[i].mfc_cq_data3_RW = + in_be64(&priv2->puq[i].mfc_cq_data3_RW); + } + for (i = 0; i < 16; i++) { + csa->priv2.spuq[i].mfc_cq_data0_RW = + in_be64(&priv2->spuq[i].mfc_cq_data0_RW); + csa->priv2.spuq[i].mfc_cq_data1_RW = + in_be64(&priv2->spuq[i].mfc_cq_data1_RW); + csa->priv2.spuq[i].mfc_cq_data2_RW = + in_be64(&priv2->spuq[i].mfc_cq_data2_RW); + csa->priv2.spuq[i].mfc_cq_data3_RW = + in_be64(&priv2->spuq[i].mfc_cq_data3_RW); + } + } +} + +static inline void save_ppu_querymask(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 20: + * Save the PPU_QueryMask register + * in the CSA. + */ + csa->prob.dma_querymask_RW = in_be32(&prob->dma_querymask_RW); +} + +static inline void save_ppu_querytype(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 21: + * Save the PPU_QueryType register + * in the CSA. + */ + csa->prob.dma_querytype_RW = in_be32(&prob->dma_querytype_RW); +} + +static inline void save_mfc_csr_tsq(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 22: + * Save the MFC_CSR_TSQ register + * in the LSCSA. + */ + csa->priv2.spu_tag_status_query_RW = + in_be64(&priv2->spu_tag_status_query_RW); +} + +static inline void save_mfc_csr_cmd(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 23: + * Save the MFC_CSR_CMD1 and MFC_CSR_CMD2 + * registers in the CSA. + */ + csa->priv2.spu_cmd_buf1_RW = in_be64(&priv2->spu_cmd_buf1_RW); + csa->priv2.spu_cmd_buf2_RW = in_be64(&priv2->spu_cmd_buf2_RW); +} + +static inline void save_mfc_csr_ato(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 24: + * Save the MFC_CSR_ATO register in + * the CSA. + */ + csa->priv2.spu_atomic_status_RW = in_be64(&priv2->spu_atomic_status_RW); +} + +static inline void save_mfc_tclass_id(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Save, Step 25: + * Save the MFC_TCLASS_ID register in + * the CSA. + */ + csa->priv1.mfc_tclass_id_RW = in_be64(&priv1->mfc_tclass_id_RW); +} + +static inline void set_mfc_tclass_id(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Save, Step 26: + * Restore, Step 23. + * Write the MFC_TCLASS_ID register with + * the value 0x10000000. + */ + out_be64(&priv1->mfc_tclass_id_RW, 0x10000000); + eieio(); +} + +static inline void purge_mfc_queue(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 27: + * Restore, Step 14. + * Write MFC_CNTL[Pc]=1 (purge queue). + */ + out_be64(&priv2->mfc_control_RW, MFC_CNTL_PURGE_DMA_REQUEST); + eieio(); +} + +static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 28: + * Poll MFC_CNTL[Ps] until value '11' is read + * (purge complete). + */ + POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_PURGE_DMA_COMPLETE); +} + +static inline void save_mfc_slbs(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Save, Step 29: + * If MFC_SR1[R]='1', save SLBs in CSA. + */ + if (in_be64(&priv1->mfc_sr1_RW) & MFC_STATE1_RELOCATE_MASK) { + csa->priv2.slb_index_W = in_be64(&priv2->slb_index_W); + for (i = 0; i < 8; i++) { + out_be64(&priv2->slb_index_W, i); + eieio(); + csa->slb_esid_RW[i] = in_be64(&priv2->slb_esid_RW); + csa->slb_vsid_RW[i] = in_be64(&priv2->slb_vsid_RW); + eieio(); + } + } +} + +static inline void setup_mfc_sr1(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Save, Step 30: + * Restore, Step 18: + * Write MFC_SR1 with MFC_SR1[D=0,S=1] and + * MFC_SR1[TL,R,Pr,T] set correctly for the + * OS specific environment. + * + * Implementation note: The SPU-side code + * for save/restore is privileged, so the + * MFC_SR1[Pr] bit is not set. + * + */ + out_be64(&priv1->mfc_sr1_RW, (MFC_STATE1_MASTER_RUN_CONTROL_MASK | + MFC_STATE1_RELOCATE_MASK | + MFC_STATE1_BUS_TLBIE_MASK)); +} + +static inline void save_spu_npc(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 31: + * Save SPU_NPC in the CSA. + */ + csa->prob.spu_npc_RW = in_be32(&prob->spu_npc_RW); +} + +static inline void save_spu_privcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 32: + * Save SPU_PrivCntl in the CSA. + */ + csa->priv2.spu_privcntl_RW = in_be64(&priv2->spu_privcntl_RW); +} + +static inline void reset_spu_privcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 33: + * Restore, Step 16: + * Write SPU_PrivCntl[S,Le,A] fields reset to 0. + */ + out_be64(&priv2->spu_privcntl_RW, 0UL); + eieio(); +} + +static inline void save_spu_lslr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 34: + * Save SPU_LSLR in the CSA. + */ + csa->priv2.spu_lslr_RW = in_be64(&priv2->spu_lslr_RW); +} + +static inline void reset_spu_lslr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 35: + * Restore, Step 17. + * Reset SPU_LSLR. + */ + out_be64(&priv2->spu_lslr_RW, LS_ADDR_MASK); + eieio(); +} + +static inline void save_spu_cfg(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 36: + * Save SPU_Cfg in the CSA. + */ + csa->priv2.spu_cfg_RW = in_be64(&priv2->spu_cfg_RW); +} + +static inline void save_pm_trace(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 37: + * Save PM_Trace_Tag_Wait_Mask in the CSA. + * Not performed by this implementation. + */ +} + +static inline void save_mfc_rag(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Save, Step 38: + * Save RA_GROUP_ID register and the + * RA_ENABLE reigster in the CSA. + */ + csa->priv1.resource_allocation_groupID_RW = + in_be64(&priv1->resource_allocation_groupID_RW); + csa->priv1.resource_allocation_enable_RW = + in_be64(&priv1->resource_allocation_enable_RW); +} + +static inline void save_ppu_mb_stat(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 39: + * Save MB_Stat register in the CSA. + */ + csa->prob.mb_stat_R = in_be32(&prob->mb_stat_R); +} + +static inline void save_ppu_mb(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 40: + * Save the PPU_MB register in the CSA. + */ + csa->prob.pu_mb_R = in_be32(&prob->pu_mb_R); +} + +static inline void save_ppuint_mb(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 41: + * Save the PPUINT_MB register in the CSA. + */ + csa->priv2.puint_mb_R = in_be64(&priv2->puint_mb_R); +} + +static inline void save_ch_part1(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 idx, ch_indices[7] = { 0UL, 1UL, 3UL, 4UL, 24UL, 25UL, 27UL }; + int i; + + /* Save, Step 42: + * Save the following CH: [0,1,3,4,24,25,27] + */ + for (i = 0; i < 7; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + csa->spu_chnldata_RW[idx] = in_be64(&priv2->spu_chnldata_RW); + csa->spu_chnlcnt_RW[idx] = in_be64(&priv2->spu_chnlcnt_RW); + out_be64(&priv2->spu_chnldata_RW, 0UL); + out_be64(&priv2->spu_chnlcnt_RW, 0UL); + eieio(); + } +} + +static inline void save_spu_mb(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Save, Step 43: + * Save SPU Read Mailbox Channel. + */ + out_be64(&priv2->spu_chnlcntptr_RW, 29UL); + eieio(); + csa->spu_chnlcnt_RW[29] = in_be64(&priv2->spu_chnlcnt_RW); + for (i = 0; i < 4; i++) { + csa->pu_mailbox_data[i] = in_be64(&priv2->spu_chnldata_RW); + } + out_be64(&priv2->spu_chnlcnt_RW, 0UL); + eieio(); +} + +static inline void save_mfc_cmd(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 44: + * Save MFC_CMD Channel. + */ + out_be64(&priv2->spu_chnlcntptr_RW, 21UL); + eieio(); + csa->spu_chnlcnt_RW[21] = in_be64(&priv2->spu_chnlcnt_RW); + eieio(); +} + +static inline void reset_ch(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 ch_indices[4] = { 21UL, 23UL, 28UL, 30UL }; + u64 ch_counts[4] = { 16UL, 1UL, 1UL, 1UL }; + u64 idx; + int i; + + /* Save, Step 45: + * Reset the following CH: [21, 23, 28, 30] + */ + for (i = 0; i < 4; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]); + eieio(); + } +} + +static inline void resume_mfc_queue(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 46: + * Restore, Step 25. + * Write MFC_CNTL[Sc]=0 (resume queue processing). + */ + out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE); +} + +static inline void invalidate_slbs(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Save, Step 45: + * Restore, Step 19: + * If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All. + */ + if (in_be64(&priv1->mfc_sr1_RW) & MFC_STATE1_RELOCATE_MASK) { + out_be64(&priv2->slb_invalidate_all_W, 0UL); + eieio(); + } +} + +static inline void get_kernel_slb(u64 ea, u64 slb[2]) +{ + slb[0] = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) | SLB_VSID_KERNEL; + slb[1] = (ea & ESID_MASK) | SLB_ESID_V; + + /* Large pages are used for kernel text/data, but not vmalloc. */ + if (cpu_has_feature(CPU_FTR_16M_PAGE) + && REGION_ID(ea) == KERNEL_REGION_ID) + slb[0] |= SLB_VSID_L; +} + +static inline void load_mfc_slb(struct spu *spu, u64 slb[2], int slbe) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + out_be64(&priv2->slb_index_W, slbe); + eieio(); + out_be64(&priv2->slb_vsid_RW, slb[0]); + out_be64(&priv2->slb_esid_RW, slb[1]); + eieio(); +} + +static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu) +{ + u64 code_slb[2]; + u64 lscsa_slb[2]; + + /* Save, Step 47: + * Restore, Step 30. + * If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All + * register, then initialize SLB_VSID and SLB_ESID + * to provide access to SPU context save code and + * LSCSA. + * + * This implementation places both the context + * switch code and LSCSA in kernel address space. + * + * Further this implementation assumes that the + * MFC_SR1[R]=1 (in other words, assume that + * translation is desired by OS environment). + */ + invalidate_slbs(csa, spu); + get_kernel_slb((unsigned long)&spu_save_code[0], code_slb); + get_kernel_slb((unsigned long)csa->lscsa, lscsa_slb); + load_mfc_slb(spu, code_slb, 0); + if ((lscsa_slb[0] != code_slb[0]) || (lscsa_slb[1] != code_slb[1])) + load_mfc_slb(spu, lscsa_slb, 1); +} + +static inline void set_switch_active(struct spu_state *csa, struct spu *spu) +{ + /* Save, Step 48: + * Restore, Step 23. + * Change the software context switch pending flag + * to context switch active. + */ + set_bit(SPU_CONTEXT_SWITCH_ACTIVE_nr, &spu->flags); + clear_bit(SPU_CONTEXT_SWITCH_PENDING_nr, &spu->flags); + mb(); +} + +static inline void enable_interrupts(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + unsigned long class1_mask = CLASS1_ENABLE_SEGMENT_FAULT_INTR | + CLASS1_ENABLE_STORAGE_FAULT_INTR; + + /* Save, Step 49: + * Restore, Step 22: + * Reset and then enable interrupts, as + * needed by OS. + * + * This implementation enables only class1 + * (translation) interrupts. + */ + spin_lock_irq(&spu->register_lock); + out_be64(&priv1->int_stat_class0_RW, ~(0UL)); + out_be64(&priv1->int_stat_class1_RW, ~(0UL)); + out_be64(&priv1->int_stat_class2_RW, ~(0UL)); + out_be64(&priv1->int_mask_class0_RW, 0UL); + out_be64(&priv1->int_mask_class1_RW, class1_mask); + out_be64(&priv1->int_mask_class2_RW, 0UL); + spin_unlock_irq(&spu->register_lock); +} + +static inline int send_mfc_dma(struct spu *spu, unsigned long ea, + unsigned int ls_offset, unsigned int size, + unsigned int tag, unsigned int rclass, + unsigned int cmd) +{ + struct spu_problem __iomem *prob = spu->problem; + union mfc_tag_size_class_cmd command; + unsigned int transfer_size; + volatile unsigned int status = 0x0; + + while (size > 0) { + transfer_size = + (size > MFC_MAX_DMA_SIZE) ? MFC_MAX_DMA_SIZE : size; + command.u.mfc_size = transfer_size; + command.u.mfc_tag = tag; + command.u.mfc_rclassid = rclass; + command.u.mfc_cmd = cmd; + do { + out_be32(&prob->mfc_lsa_W, ls_offset); + out_be64(&prob->mfc_ea_W, ea); + out_be64(&prob->mfc_union_W.all64, command.all64); + status = + in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32); + if (unlikely(status & 0x2)) { + cpu_relax(); + } + } while (status & 0x3); + size -= transfer_size; + ea += transfer_size; + ls_offset += transfer_size; + } + return 0; +} + +static inline void save_ls_16kb(struct spu_state *csa, struct spu *spu) +{ + unsigned long addr = (unsigned long)&csa->lscsa->ls[0]; + unsigned int ls_offset = 0x0; + unsigned int size = 16384; + unsigned int tag = 0; + unsigned int rclass = 0; + unsigned int cmd = MFC_PUT_CMD; + + /* Save, Step 50: + * Issue a DMA command to copy the first 16K bytes + * of local storage to the CSA. + */ + send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd); +} + +static inline void set_spu_npc(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 51: + * Restore, Step 31. + * Write SPU_NPC[IE]=0 and SPU_NPC[LSA] to entry + * point address of context save code in local + * storage. + * + * This implementation uses SPU-side save/restore + * programs with entry points at LSA of 0. + */ + out_be32(&prob->spu_npc_RW, 0); + eieio(); +} + +static inline void set_signot1(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + union { + u64 ull; + u32 ui[2]; + } addr64; + + /* Save, Step 52: + * Restore, Step 32: + * Write SPU_Sig_Notify_1 register with upper 32-bits + * of the CSA.LSCSA effective address. + */ + addr64.ull = (u64) csa->lscsa; + out_be32(&prob->signal_notify1, addr64.ui[0]); + eieio(); +} + +static inline void set_signot2(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + union { + u64 ull; + u32 ui[2]; + } addr64; + + /* Save, Step 53: + * Restore, Step 33: + * Write SPU_Sig_Notify_2 register with lower 32-bits + * of the CSA.LSCSA effective address. + */ + addr64.ull = (u64) csa->lscsa; + out_be32(&prob->signal_notify2, addr64.ui[1]); + eieio(); +} + +static inline void send_save_code(struct spu_state *csa, struct spu *spu) +{ + unsigned long addr = (unsigned long)&spu_save_code[0]; + unsigned int ls_offset = 0x0; + unsigned int size = sizeof(spu_save_code); + unsigned int tag = 0; + unsigned int rclass = 0; + unsigned int cmd = MFC_GETFS_CMD; + + /* Save, Step 54: + * Issue a DMA command to copy context save code + * to local storage and start SPU. + */ + send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd); +} + +static inline void set_ppu_querymask(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Save, Step 55: + * Restore, Step 38. + * Write PPU_QueryMask=1 (enable Tag Group 0) + * and issue eieio instruction. + */ + out_be32(&prob->dma_querymask_RW, MFC_TAGID_TO_TAGMASK(0)); + eieio(); +} + +static inline void wait_tag_complete(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + struct spu_problem __iomem *prob = spu->problem; + u32 mask = MFC_TAGID_TO_TAGMASK(0); + unsigned long flags; + + /* Save, Step 56: + * Restore, Step 39. + * Restore, Step 39. + * Restore, Step 46. + * Poll PPU_TagStatus[gn] until 01 (Tag group 0 complete) + * or write PPU_QueryType[TS]=01 and wait for Tag Group + * Complete Interrupt. Write INT_Stat_Class0 or + * INT_Stat_Class2 with value of 'handled'. + */ + POLL_WHILE_FALSE(in_be32(&prob->dma_tagstatus_R) & mask); + + local_irq_save(flags); + out_be64(&priv1->int_stat_class0_RW, ~(0UL)); + out_be64(&priv1->int_stat_class2_RW, ~(0UL)); + local_irq_restore(flags); +} + +static inline void wait_spu_stopped(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + struct spu_problem __iomem *prob = spu->problem; + unsigned long flags; + + /* Save, Step 57: + * Restore, Step 40. + * Poll until SPU_Status[R]=0 or wait for SPU Class 0 + * or SPU Class 2 interrupt. Write INT_Stat_class0 + * or INT_Stat_class2 with value of handled. + */ + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING); + + local_irq_save(flags); + out_be64(&priv1->int_stat_class0_RW, ~(0UL)); + out_be64(&priv1->int_stat_class2_RW, ~(0UL)); + local_irq_restore(flags); +} + +static inline int check_save_status(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 complete; + + /* Save, Step 54: + * If SPU_Status[P]=1 and SPU_Status[SC] = "success", + * context save succeeded, otherwise context save + * failed. + */ + complete = ((SPU_SAVE_COMPLETE << SPU_STOP_STATUS_SHIFT) | + SPU_STATUS_STOPPED_BY_STOP); + return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0; +} + +static inline void terminate_spu_app(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 4: + * If required, notify the "using application" that + * the SPU task has been terminated. TBD. + */ +} + +static inline void suspend_mfc(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 7: + * Restore, Step 47. + * Write MFC_Cntl[Dh,Sc]='1','1' to suspend + * the queue and halt the decrementer. + */ + out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE | + MFC_CNTL_DECREMENTER_HALTED); + eieio(); +} + +static inline void wait_suspend_mfc_complete(struct spu_state *csa, + struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 8: + * Restore, Step 47. + * Poll MFC_CNTL[Ss] until 11 is returned. + */ + POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & + MFC_CNTL_SUSPEND_COMPLETE); +} + +static inline int suspend_spe(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 9: + * If SPU_Status[R]=1, stop SPU execution + * and wait for stop to complete. + * + * Returns 1 if SPU_Status[R]=1 on entry. + * 0 otherwise + */ + if (in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) { + if (in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_EXIT_STAUTUS) { + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + if ((in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_LOAD_STAUTUS) + || (in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_STATE)) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + out_be32(&prob->spu_runcntl_RW, 0x2); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + if (in_be32(&prob->spu_status_R) & + SPU_STATUS_WAITING_FOR_CHANNEL) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + return 1; + } + return 0; +} + +static inline void clear_spu_status(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Restore, Step 10: + * If SPU_Status[R]=0 and SPU_Status[E,L,IS]=1, + * release SPU from isolate state. + */ + if (!(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING)) { + if (in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_EXIT_STAUTUS) { + out_be64(&priv1->mfc_sr1_RW, + MFC_STATE1_MASTER_RUN_CONTROL_MASK); + eieio(); + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + if ((in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_LOAD_STAUTUS) + || (in_be32(&prob->spu_status_R) & + SPU_STATUS_ISOLATED_STATE)) { + out_be64(&priv1->mfc_sr1_RW, + MFC_STATE1_MASTER_RUN_CONTROL_MASK); + eieio(); + out_be32(&prob->spu_runcntl_RW, 0x2); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } + } +} + +static inline void reset_ch_part1(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 ch_indices[7] = { 0UL, 1UL, 3UL, 4UL, 24UL, 25UL, 27UL }; + u64 idx; + int i; + + /* Restore, Step 20: + * Reset the following CH: [0,1,3,4,24,25,27] + */ + for (i = 0; i < 7; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnldata_RW, 0UL); + out_be64(&priv2->spu_chnlcnt_RW, 0UL); + eieio(); + } +} + +static inline void reset_ch_part2(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 ch_indices[5] = { 21UL, 23UL, 28UL, 29UL, 30UL }; + u64 ch_counts[5] = { 16UL, 1UL, 1UL, 0UL, 1UL }; + u64 idx; + int i; + + /* Restore, Step 21: + * Reset the following CH: [21, 23, 28, 29, 30] + */ + for (i = 0; i < 5; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]); + eieio(); + } +} + +static inline void setup_spu_status_part1(struct spu_state *csa, + struct spu *spu) +{ + u32 status_P = SPU_STATUS_STOPPED_BY_STOP; + u32 status_I = SPU_STATUS_INVALID_INSTR; + u32 status_H = SPU_STATUS_STOPPED_BY_HALT; + u32 status_S = SPU_STATUS_SINGLE_STEP; + u32 status_S_I = SPU_STATUS_SINGLE_STEP | SPU_STATUS_INVALID_INSTR; + u32 status_S_P = SPU_STATUS_SINGLE_STEP | SPU_STATUS_STOPPED_BY_STOP; + u32 status_P_H = SPU_STATUS_STOPPED_BY_HALT |SPU_STATUS_STOPPED_BY_STOP; + u32 status_P_I = SPU_STATUS_STOPPED_BY_STOP |SPU_STATUS_INVALID_INSTR; + u32 status_code; + + /* Restore, Step 27: + * If the CSA.SPU_Status[I,S,H,P]=1 then add the correct + * instruction sequence to the end of the SPU based restore + * code (after the "context restored" stop and signal) to + * restore the correct SPU status. + * + * NOTE: Rather than modifying the SPU executable, we + * instead add a new 'stopped_status' field to the + * LSCSA. The SPU-side restore reads this field and + * takes the appropriate action when exiting. + */ + + status_code = + (csa->prob.spu_status_R >> SPU_STOP_STATUS_SHIFT) & 0xFFFF; + if ((csa->prob.spu_status_R & status_P_I) == status_P_I) { + + /* SPU_Status[P,I]=1 - Illegal Instruction followed + * by Stop and Signal instruction, followed by 'br -4'. + * + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_I; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_P_H) == status_P_H) { + + /* SPU_Status[P,H]=1 - Halt Conditional, followed + * by Stop and Signal instruction, followed by + * 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_H; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_S_P) == status_S_P) { + + /* SPU_Status[S,P]=1 - Stop and Signal instruction + * followed by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_P; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_S_I) == status_S_I) { + + /* SPU_Status[S,I]=1 - Illegal instruction followed + * by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_I; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_P) == status_P) { + + /* SPU_Status[P]=1 - Stop and Signal instruction + * followed by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P; + csa->lscsa->stopped_status.slot[1] = status_code; + + } else if ((csa->prob.spu_status_R & status_H) == status_H) { + + /* SPU_Status[H]=1 - Halt Conditional, followed + * by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_H; + + } else if ((csa->prob.spu_status_R & status_S) == status_S) { + + /* SPU_Status[S]=1 - Two nop instructions. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S; + + } else if ((csa->prob.spu_status_R & status_I) == status_I) { + + /* SPU_Status[I]=1 - Illegal instruction followed + * by 'br -4'. + */ + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_I; + + } +} + +static inline void setup_spu_status_part2(struct spu_state *csa, + struct spu *spu) +{ + u32 mask; + + /* Restore, Step 28: + * If the CSA.SPU_Status[I,S,H,P,R]=0 then + * add a 'br *' instruction to the end of + * the SPU based restore code. + * + * NOTE: Rather than modifying the SPU executable, we + * instead add a new 'stopped_status' field to the + * LSCSA. The SPU-side restore reads this field and + * takes the appropriate action when exiting. + */ + mask = SPU_STATUS_INVALID_INSTR | + SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | + SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING; + if (!(csa->prob.spu_status_R & mask)) { + csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_R; + } +} + +static inline void restore_mfc_rag(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Restore, Step 29: + * Restore RA_GROUP_ID register and the + * RA_ENABLE reigster from the CSA. + */ + out_be64(&priv1->resource_allocation_groupID_RW, + csa->priv1.resource_allocation_groupID_RW); + out_be64(&priv1->resource_allocation_enable_RW, + csa->priv1.resource_allocation_enable_RW); +} + +static inline void send_restore_code(struct spu_state *csa, struct spu *spu) +{ + unsigned long addr = (unsigned long)&spu_restore_code[0]; + unsigned int ls_offset = 0x0; + unsigned int size = sizeof(spu_restore_code); + unsigned int tag = 0; + unsigned int rclass = 0; + unsigned int cmd = MFC_GETFS_CMD; + + /* Restore, Step 37: + * Issue MFC DMA command to copy context + * restore code to local storage. + */ + send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd); +} + +static inline void setup_decr(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 34: + * If CSA.MFC_CNTL[Ds]=1 (decrementer was + * running) then adjust decrementer, set + * decrementer running status in LSCSA, + * and set decrementer "wrapped" status + * in LSCSA. + */ + if (csa->priv2.mfc_control_RW & MFC_CNTL_DECREMENTER_RUNNING) { + cycles_t resume_time = get_cycles(); + cycles_t delta_time = resume_time - csa->suspend_time; + + csa->lscsa->decr.slot[0] = delta_time; + } +} + +static inline void setup_ppu_mb(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 35: + * Copy the CSA.PU_MB data into the LSCSA. + */ + csa->lscsa->ppu_mb.slot[0] = csa->prob.pu_mb_R; +} + +static inline void setup_ppuint_mb(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 36: + * Copy the CSA.PUINT_MB data into the LSCSA. + */ + csa->lscsa->ppuint_mb.slot[0] = csa->priv2.puint_mb_R; +} + +static inline int check_restore_status(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 complete; + + /* Restore, Step 40: + * If SPU_Status[P]=1 and SPU_Status[SC] = "success", + * context restore succeeded, otherwise context restore + * failed. + */ + complete = ((SPU_RESTORE_COMPLETE << SPU_STOP_STATUS_SHIFT) | + SPU_STATUS_STOPPED_BY_STOP); + return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0; +} + +static inline void restore_spu_privcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 41: + * Restore SPU_PrivCntl from the CSA. + */ + out_be64(&priv2->spu_privcntl_RW, csa->priv2.spu_privcntl_RW); + eieio(); +} + +static inline void restore_status_part1(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 mask; + + /* Restore, Step 42: + * If any CSA.SPU_Status[I,S,H,P]=1, then + * restore the error or single step state. + */ + mask = SPU_STATUS_INVALID_INSTR | + SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; + if (csa->prob.spu_status_R & mask) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } +} + +static inline void restore_status_part2(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 mask; + + /* Restore, Step 43: + * If all CSA.SPU_Status[I,S,H,P,R]=0 then write + * SPU_RunCntl[R0R1]='01', wait for SPU_Status[R]=1, + * then write '00' to SPU_RunCntl[R0R1] and wait + * for SPU_Status[R]=0. + */ + mask = SPU_STATUS_INVALID_INSTR | + SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | + SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING; + if (!(csa->prob.spu_status_R & mask)) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE); + eieio(); + POLL_WHILE_FALSE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP); + eieio(); + POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & + SPU_STATUS_RUNNING); + } +} + +static inline void restore_ls_16kb(struct spu_state *csa, struct spu *spu) +{ + unsigned long addr = (unsigned long)&csa->lscsa->ls[0]; + unsigned int ls_offset = 0x0; + unsigned int size = 16384; + unsigned int tag = 0; + unsigned int rclass = 0; + unsigned int cmd = MFC_GET_CMD; + + /* Restore, Step 44: + * Issue a DMA command to restore the first + * 16kb of local storage from CSA. + */ + send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd); +} + +static inline void clear_interrupts(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Restore, Step 49: + * Write INT_MASK_class0 with value of 0. + * Write INT_MASK_class1 with value of 0. + * Write INT_MASK_class2 with value of 0. + * Write INT_STAT_class0 with value of -1. + * Write INT_STAT_class1 with value of -1. + * Write INT_STAT_class2 with value of -1. + */ + spin_lock_irq(&spu->register_lock); + out_be64(&priv1->int_mask_class0_RW, 0UL); + out_be64(&priv1->int_mask_class1_RW, 0UL); + out_be64(&priv1->int_mask_class2_RW, 0UL); + out_be64(&priv1->int_stat_class0_RW, ~(0UL)); + out_be64(&priv1->int_stat_class1_RW, ~(0UL)); + out_be64(&priv1->int_stat_class2_RW, ~(0UL)); + spin_unlock_irq(&spu->register_lock); +} + +static inline void restore_mfc_queues(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Restore, Step 50: + * If MFC_Cntl[Se]!=0 then restore + * MFC command queues. + */ + if ((csa->priv2.mfc_control_RW & MFC_CNTL_DMA_QUEUES_EMPTY_MASK) == 0) { + for (i = 0; i < 8; i++) { + out_be64(&priv2->puq[i].mfc_cq_data0_RW, + csa->priv2.puq[i].mfc_cq_data0_RW); + out_be64(&priv2->puq[i].mfc_cq_data1_RW, + csa->priv2.puq[i].mfc_cq_data1_RW); + out_be64(&priv2->puq[i].mfc_cq_data2_RW, + csa->priv2.puq[i].mfc_cq_data2_RW); + out_be64(&priv2->puq[i].mfc_cq_data3_RW, + csa->priv2.puq[i].mfc_cq_data3_RW); + } + for (i = 0; i < 16; i++) { + out_be64(&priv2->spuq[i].mfc_cq_data0_RW, + csa->priv2.spuq[i].mfc_cq_data0_RW); + out_be64(&priv2->spuq[i].mfc_cq_data1_RW, + csa->priv2.spuq[i].mfc_cq_data1_RW); + out_be64(&priv2->spuq[i].mfc_cq_data2_RW, + csa->priv2.spuq[i].mfc_cq_data2_RW); + out_be64(&priv2->spuq[i].mfc_cq_data3_RW, + csa->priv2.spuq[i].mfc_cq_data3_RW); + } + } + eieio(); +} + +static inline void restore_ppu_querymask(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 51: + * Restore the PPU_QueryMask register from CSA. + */ + out_be32(&prob->dma_querymask_RW, csa->prob.dma_querymask_RW); + eieio(); +} + +static inline void restore_ppu_querytype(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 52: + * Restore the PPU_QueryType register from CSA. + */ + out_be32(&prob->dma_querytype_RW, csa->prob.dma_querytype_RW); + eieio(); +} + +static inline void restore_mfc_csr_tsq(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 53: + * Restore the MFC_CSR_TSQ register from CSA. + */ + out_be64(&priv2->spu_tag_status_query_RW, + csa->priv2.spu_tag_status_query_RW); + eieio(); +} + +static inline void restore_mfc_csr_cmd(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 54: + * Restore the MFC_CSR_CMD1 and MFC_CSR_CMD2 + * registers from CSA. + */ + out_be64(&priv2->spu_cmd_buf1_RW, csa->priv2.spu_cmd_buf1_RW); + out_be64(&priv2->spu_cmd_buf2_RW, csa->priv2.spu_cmd_buf2_RW); + eieio(); +} + +static inline void restore_mfc_csr_ato(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 55: + * Restore the MFC_CSR_ATO register from CSA. + */ + out_be64(&priv2->spu_atomic_status_RW, csa->priv2.spu_atomic_status_RW); +} + +static inline void restore_mfc_tclass_id(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Restore, Step 56: + * Restore the MFC_TCLASS_ID register from CSA. + */ + out_be64(&priv1->mfc_tclass_id_RW, csa->priv1.mfc_tclass_id_RW); + eieio(); +} + +static inline void set_llr_event(struct spu_state *csa, struct spu *spu) +{ + u64 ch0_cnt, ch0_data; + u64 ch1_data; + + /* Restore, Step 57: + * Set the Lock Line Reservation Lost Event by: + * 1. OR CSA.SPU_Event_Status with bit 21 (Lr) set to 1. + * 2. If CSA.SPU_Channel_0_Count=0 and + * CSA.SPU_Wr_Event_Mask[Lr]=1 and + * CSA.SPU_Event_Status[Lr]=0 then set + * CSA.SPU_Event_Status_Count=1. + */ + ch0_cnt = csa->spu_chnlcnt_RW[0]; + ch0_data = csa->spu_chnldata_RW[0]; + ch1_data = csa->spu_chnldata_RW[1]; + csa->spu_chnldata_RW[0] |= MFC_LLR_LOST_EVENT; + if ((ch0_cnt == 0) && !(ch0_data & MFC_LLR_LOST_EVENT) && + (ch1_data & MFC_LLR_LOST_EVENT)) { + csa->spu_chnlcnt_RW[0] = 1; + } +} + +static inline void restore_decr_wrapped(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 58: + * If the status of the CSA software decrementer + * "wrapped" flag is set, OR in a '1' to + * CSA.SPU_Event_Status[Tm]. + */ + if (csa->lscsa->decr_status.slot[0] == 1) { + csa->spu_chnldata_RW[0] |= 0x20; + } + if ((csa->lscsa->decr_status.slot[0] == 1) && + (csa->spu_chnlcnt_RW[0] == 0 && + ((csa->spu_chnldata_RW[2] & 0x20) == 0x0) && + ((csa->spu_chnldata_RW[0] & 0x20) != 0x1))) { + csa->spu_chnlcnt_RW[0] = 1; + } +} + +static inline void restore_ch_part1(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 idx, ch_indices[7] = { 0UL, 1UL, 3UL, 4UL, 24UL, 25UL, 27UL }; + int i; + + /* Restore, Step 59: + * Restore the following CH: [0,1,3,4,24,25,27] + */ + for (i = 0; i < 7; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnldata_RW, csa->spu_chnldata_RW[idx]); + out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[idx]); + eieio(); + } +} + +static inline void restore_ch_part2(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 ch_indices[3] = { 9UL, 21UL, 23UL }; + u64 ch_counts[3] = { 1UL, 16UL, 1UL }; + u64 idx; + int i; + + /* Restore, Step 60: + * Restore the following CH: [9,21,23]. + */ + ch_counts[0] = 1UL; + ch_counts[1] = csa->spu_chnlcnt_RW[21]; + ch_counts[2] = 1UL; + for (i = 0; i < 3; i++) { + idx = ch_indices[i]; + out_be64(&priv2->spu_chnlcntptr_RW, idx); + eieio(); + out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]); + eieio(); + } +} + +static inline void restore_spu_lslr(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 61: + * Restore the SPU_LSLR register from CSA. + */ + out_be64(&priv2->spu_lslr_RW, csa->priv2.spu_lslr_RW); + eieio(); +} + +static inline void restore_spu_cfg(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 62: + * Restore the SPU_Cfg register from CSA. + */ + out_be64(&priv2->spu_cfg_RW, csa->priv2.spu_cfg_RW); + eieio(); +} + +static inline void restore_pm_trace(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 63: + * Restore PM_Trace_Tag_Wait_Mask from CSA. + * Not performed by this implementation. + */ +} + +static inline void restore_spu_npc(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 64: + * Restore SPU_NPC from CSA. + */ + out_be32(&prob->spu_npc_RW, csa->prob.spu_npc_RW); + eieio(); +} + +static inline void restore_spu_mb(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Restore, Step 65: + * Restore MFC_RdSPU_MB from CSA. + */ + out_be64(&priv2->spu_chnlcntptr_RW, 29UL); + eieio(); + out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[29]); + for (i = 0; i < 4; i++) { + out_be64(&priv2->spu_chnldata_RW, csa->pu_mailbox_data[i]); + } + eieio(); +} + +static inline void check_ppu_mb_stat(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + u32 dummy = 0; + + /* Restore, Step 66: + * If CSA.MB_Stat[P]=0 (mailbox empty) then + * read from the PPU_MB register. + */ + if ((csa->prob.mb_stat_R & 0xFF) == 0) { + dummy = in_be32(&prob->pu_mb_R); + eieio(); + } +} + +static inline void check_ppuint_mb_stat(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + struct spu_priv2 __iomem *priv2 = spu->priv2; + u64 dummy = 0UL; + + /* Restore, Step 66: + * If CSA.MB_Stat[I]=0 (mailbox empty) then + * read from the PPUINT_MB register. + */ + if ((csa->prob.mb_stat_R & 0xFF0000) == 0) { + dummy = in_be64(&priv2->puint_mb_R); + eieio(); + out_be64(&priv1->int_stat_class2_RW, + CLASS2_ENABLE_MAILBOX_INTR); + eieio(); + } +} + +static inline void restore_mfc_slbs(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + int i; + + /* Restore, Step 68: + * If MFC_SR1[R]='1', restore SLBs from CSA. + */ + if (csa->priv1.mfc_sr1_RW & MFC_STATE1_RELOCATE_MASK) { + for (i = 0; i < 8; i++) { + out_be64(&priv2->slb_index_W, i); + eieio(); + out_be64(&priv2->slb_esid_RW, csa->slb_esid_RW[i]); + out_be64(&priv2->slb_vsid_RW, csa->slb_vsid_RW[i]); + eieio(); + } + out_be64(&priv2->slb_index_W, csa->priv2.slb_index_W); + eieio(); + } +} + +static inline void restore_mfc_sr1(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Restore, Step 69: + * Restore the MFC_SR1 register from CSA. + */ + out_be64(&priv1->mfc_sr1_RW, csa->priv1.mfc_sr1_RW); + eieio(); +} + +static inline void restore_other_spu_access(struct spu_state *csa, + struct spu *spu) +{ + /* Restore, Step 70: + * Restore other SPU mappings to this SPU. TBD. + */ +} + +static inline void restore_spu_runcntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_problem __iomem *prob = spu->problem; + + /* Restore, Step 71: + * If CSA.SPU_Status[R]=1 then write + * SPU_RunCntl[R0R1]='01'. + */ + if (csa->prob.spu_status_R & SPU_STATUS_RUNNING) { + out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE); + eieio(); + } +} + +static inline void restore_mfc_cntl(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv2 __iomem *priv2 = spu->priv2; + + /* Restore, Step 72: + * Restore the MFC_CNTL register for the CSA. + */ + out_be64(&priv2->mfc_control_RW, csa->priv2.mfc_control_RW); + eieio(); +} + +static inline void enable_user_access(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 73: + * Enable user-space access (if provided) to this + * SPU by mapping the virtual pages assigned to + * the SPU memory-mapped I/O (MMIO) for problem + * state. TBD. + */ +} + +static inline void reset_switch_active(struct spu_state *csa, struct spu *spu) +{ + /* Restore, Step 74: + * Reset the "context switch active" flag. + */ + clear_bit(SPU_CONTEXT_SWITCH_ACTIVE_nr, &spu->flags); + mb(); +} + +static inline void reenable_interrupts(struct spu_state *csa, struct spu *spu) +{ + struct spu_priv1 __iomem *priv1 = spu->priv1; + + /* Restore, Step 75: + * Re-enable SPU interrupts. + */ + spin_lock_irq(&spu->register_lock); + out_be64(&priv1->int_mask_class0_RW, csa->priv1.int_mask_class0_RW); + out_be64(&priv1->int_mask_class1_RW, csa->priv1.int_mask_class1_RW); + out_be64(&priv1->int_mask_class2_RW, csa->priv1.int_mask_class2_RW); + spin_unlock_irq(&spu->register_lock); +} + +static int quiece_spu(struct spu_state *prev, struct spu *spu) +{ + /* + * Combined steps 2-18 of SPU context save sequence, which + * quiesce the SPU state (disable SPU execution, MFC command + * queues, decrementer, SPU interrupts, etc.). + * + * Returns 0 on success. + * 2 if failed step 2. + * 6 if failed step 6. + */ + + if (check_spu_isolate(prev, spu)) { /* Step 2. */ + return 2; + } + disable_interrupts(prev, spu); /* Step 3. */ + set_watchdog_timer(prev, spu); /* Step 4. */ + inhibit_user_access(prev, spu); /* Step 5. */ + if (check_spu_isolate(prev, spu)) { /* Step 6. */ + return 6; + } + set_switch_pending(prev, spu); /* Step 7. */ + save_mfc_cntl(prev, spu); /* Step 8. */ + save_spu_runcntl(prev, spu); /* Step 9. */ + save_mfc_sr1(prev, spu); /* Step 10. */ + save_spu_status(prev, spu); /* Step 11. */ + save_mfc_decr(prev, spu); /* Step 12. */ + halt_mfc_decr(prev, spu); /* Step 13. */ + save_timebase(prev, spu); /* Step 14. */ + remove_other_spu_access(prev, spu); /* Step 15. */ + do_mfc_mssync(prev, spu); /* Step 16. */ + issue_mfc_tlbie(prev, spu); /* Step 17. */ + handle_pending_interrupts(prev, spu); /* Step 18. */ + + return 0; +} + +static void save_csa(struct spu_state *prev, struct spu *spu) +{ + /* + * Combine steps 19-44 of SPU context save sequence, which + * save regions of the privileged & problem state areas. + */ + + save_mfc_queues(prev, spu); /* Step 19. */ + save_ppu_querymask(prev, spu); /* Step 20. */ + save_ppu_querytype(prev, spu); /* Step 21. */ + save_mfc_csr_tsq(prev, spu); /* Step 22. */ + save_mfc_csr_cmd(prev, spu); /* Step 23. */ + save_mfc_csr_ato(prev, spu); /* Step 24. */ + save_mfc_tclass_id(prev, spu); /* Step 25. */ + set_mfc_tclass_id(prev, spu); /* Step 26. */ + purge_mfc_queue(prev, spu); /* Step 27. */ + wait_purge_complete(prev, spu); /* Step 28. */ + save_mfc_slbs(prev, spu); /* Step 29. */ + setup_mfc_sr1(prev, spu); /* Step 30. */ + save_spu_npc(prev, spu); /* Step 31. */ + save_spu_privcntl(prev, spu); /* Step 32. */ + reset_spu_privcntl(prev, spu); /* Step 33. */ + save_spu_lslr(prev, spu); /* Step 34. */ + reset_spu_lslr(prev, spu); /* Step 35. */ + save_spu_cfg(prev, spu); /* Step 36. */ + save_pm_trace(prev, spu); /* Step 37. */ + save_mfc_rag(prev, spu); /* Step 38. */ + save_ppu_mb_stat(prev, spu); /* Step 39. */ + save_ppu_mb(prev, spu); /* Step 40. */ + save_ppuint_mb(prev, spu); /* Step 41. */ + save_ch_part1(prev, spu); /* Step 42. */ + save_spu_mb(prev, spu); /* Step 43. */ + save_mfc_cmd(prev, spu); /* Step 44. */ + reset_ch(prev, spu); /* Step 45. */ +} + +static void save_lscsa(struct spu_state *prev, struct spu *spu) +{ + /* + * Perform steps 46-57 of SPU context save sequence, + * which save regions of the local store and register + * file. + */ + + resume_mfc_queue(prev, spu); /* Step 46. */ + setup_mfc_slbs(prev, spu); /* Step 47. */ + set_switch_active(prev, spu); /* Step 48. */ + enable_interrupts(prev, spu); /* Step 49. */ + save_ls_16kb(prev, spu); /* Step 50. */ + set_spu_npc(prev, spu); /* Step 51. */ + set_signot1(prev, spu); /* Step 52. */ + set_signot2(prev, spu); /* Step 53. */ + send_save_code(prev, spu); /* Step 54. */ + set_ppu_querymask(prev, spu); /* Step 55. */ + wait_tag_complete(prev, spu); /* Step 56. */ + wait_spu_stopped(prev, spu); /* Step 57. */ +} + +static void harvest(struct spu_state *prev, struct spu *spu) +{ + /* + * Perform steps 2-25 of SPU context restore sequence, + * which resets an SPU either after a failed save, or + * when using SPU for first time. + */ + + disable_interrupts(prev, spu); /* Step 2. */ + inhibit_user_access(prev, spu); /* Step 3. */ + terminate_spu_app(prev, spu); /* Step 4. */ + set_switch_pending(prev, spu); /* Step 5. */ + remove_other_spu_access(prev, spu); /* Step 6. */ + suspend_mfc(prev, spu); /* Step 7. */ + wait_suspend_mfc_complete(prev, spu); /* Step 8. */ + if (!suspend_spe(prev, spu)) /* Step 9. */ + clear_spu_status(prev, spu); /* Step 10. */ + do_mfc_mssync(prev, spu); /* Step 11. */ + issue_mfc_tlbie(prev, spu); /* Step 12. */ + handle_pending_interrupts(prev, spu); /* Step 13. */ + purge_mfc_queue(prev, spu); /* Step 14. */ + wait_purge_complete(prev, spu); /* Step 15. */ + reset_spu_privcntl(prev, spu); /* Step 16. */ + reset_spu_lslr(prev, spu); /* Step 17. */ + setup_mfc_sr1(prev, spu); /* Step 18. */ + invalidate_slbs(prev, spu); /* Step 19. */ + reset_ch_part1(prev, spu); /* Step 20. */ + reset_ch_part2(prev, spu); /* Step 21. */ + enable_interrupts(prev, spu); /* Step 22. */ + set_switch_active(prev, spu); /* Step 23. */ + set_mfc_tclass_id(prev, spu); /* Step 24. */ + resume_mfc_queue(prev, spu); /* Step 25. */ +} + +static void restore_lscsa(struct spu_state *next, struct spu *spu) +{ + /* + * Perform steps 26-40 of SPU context restore sequence, + * which restores regions of the local store and register + * file. + */ + + set_watchdog_timer(next, spu); /* Step 26. */ + setup_spu_status_part1(next, spu); /* Step 27. */ + setup_spu_status_part2(next, spu); /* Step 28. */ + restore_mfc_rag(next, spu); /* Step 29. */ + setup_mfc_slbs(next, spu); /* Step 30. */ + set_spu_npc(next, spu); /* Step 31. */ + set_signot1(next, spu); /* Step 32. */ + set_signot2(next, spu); /* Step 33. */ + setup_decr(next, spu); /* Step 34. */ + setup_ppu_mb(next, spu); /* Step 35. */ + setup_ppuint_mb(next, spu); /* Step 36. */ + send_restore_code(next, spu); /* Step 37. */ + set_ppu_querymask(next, spu); /* Step 38. */ + wait_tag_complete(next, spu); /* Step 39. */ + wait_spu_stopped(next, spu); /* Step 40. */ +} + +static void restore_csa(struct spu_state *next, struct spu *spu) +{ + /* + * Combine steps 41-76 of SPU context restore sequence, which + * restore regions of the privileged & problem state areas. + */ + + restore_spu_privcntl(next, spu); /* Step 41. */ + restore_status_part1(next, spu); /* Step 42. */ + restore_status_part2(next, spu); /* Step 43. */ + restore_ls_16kb(next, spu); /* Step 44. */ + wait_tag_complete(next, spu); /* Step 45. */ + suspend_mfc(next, spu); /* Step 46. */ + wait_suspend_mfc_complete(next, spu); /* Step 47. */ + issue_mfc_tlbie(next, spu); /* Step 48. */ + clear_interrupts(next, spu); /* Step 49. */ + restore_mfc_queues(next, spu); /* Step 50. */ + restore_ppu_querymask(next, spu); /* Step 51. */ + restore_ppu_querytype(next, spu); /* Step 52. */ + restore_mfc_csr_tsq(next, spu); /* Step 53. */ + restore_mfc_csr_cmd(next, spu); /* Step 54. */ + restore_mfc_csr_ato(next, spu); /* Step 55. */ + restore_mfc_tclass_id(next, spu); /* Step 56. */ + set_llr_event(next, spu); /* Step 57. */ + restore_decr_wrapped(next, spu); /* Step 58. */ + restore_ch_part1(next, spu); /* Step 59. */ + restore_ch_part2(next, spu); /* Step 60. */ + restore_spu_lslr(next, spu); /* Step 61. */ + restore_spu_cfg(next, spu); /* Step 62. */ + restore_pm_trace(next, spu); /* Step 63. */ + restore_spu_npc(next, spu); /* Step 64. */ + restore_spu_mb(next, spu); /* Step 65. */ + check_ppu_mb_stat(next, spu); /* Step 66. */ + check_ppuint_mb_stat(next, spu); /* Step 67. */ + restore_mfc_slbs(next, spu); /* Step 68. */ + restore_mfc_sr1(next, spu); /* Step 69. */ + restore_other_spu_access(next, spu); /* Step 70. */ + restore_spu_runcntl(next, spu); /* Step 71. */ + restore_mfc_cntl(next, spu); /* Step 72. */ + enable_user_access(next, spu); /* Step 73. */ + reset_switch_active(next, spu); /* Step 74. */ + reenable_interrupts(next, spu); /* Step 75. */ +} + +static int __do_spu_save(struct spu_state *prev, struct spu *spu) +{ + int rc; + + /* + * SPU context save can be broken into three phases: + * + * (a) quiesce [steps 2-16]. + * (b) save of CSA, performed by PPE [steps 17-42] + * (c) save of LSCSA, mostly performed by SPU [steps 43-52]. + * + * Returns 0 on success. + * 2,6 if failed to quiece SPU + * 53 if SPU-side of save failed. + */ + + rc = quiece_spu(prev, spu); /* Steps 2-16. */ + switch (rc) { + default: + case 2: + case 6: + harvest(prev, spu); + return rc; + break; + case 0: + break; + } + save_csa(prev, spu); /* Steps 17-43. */ + save_lscsa(prev, spu); /* Steps 44-53. */ + return check_save_status(prev, spu); /* Step 54. */ +} + +static int __do_spu_restore(struct spu_state *next, struct spu *spu) +{ + int rc; + + /* + * SPU context restore can be broken into three phases: + * + * (a) harvest (or reset) SPU [steps 2-24]. + * (b) restore LSCSA [steps 25-40], mostly performed by SPU. + * (c) restore CSA [steps 41-76], performed by PPE. + * + * The 'harvest' step is not performed here, but rather + * as needed below. + */ + + restore_lscsa(next, spu); /* Steps 24-39. */ + rc = check_restore_status(next, spu); /* Step 40. */ + switch (rc) { + default: + /* Failed. Return now. */ + return rc; + break; + case 0: + /* Fall through to next step. */ + break; + } + restore_csa(next, spu); + + return 0; +} + /** * spu_save - SPU context save, with locking. * @prev: pointer to SPU context save area, to be saved. @@ -61,9 +2074,13 @@ */ int spu_save(struct spu_state *prev, struct spu *spu) { - /* XXX missing */ + int rc; - return 0; + acquire_spu_lock(spu); /* Step 1. */ + rc = __do_spu_save(prev, spu); /* Steps 2-53. */ + release_spu_lock(spu); + + return rc; } /** @@ -77,9 +2094,14 @@ int spu_save(struct spu_state *prev, struct spu *spu) */ int spu_restore(struct spu_state *new, struct spu *spu) { - /* XXX missing */ + int rc; - return 0; + acquire_spu_lock(spu); + harvest(NULL, spu); + rc = __do_spu_restore(new, spu); + release_spu_lock(spu); + + return rc; } /** @@ -93,9 +2115,17 @@ int spu_restore(struct spu_state *new, struct spu *spu) */ int spu_switch(struct spu_state *prev, struct spu_state *new, struct spu *spu) { - /* XXX missing */ + int rc; - return 0; + acquire_spu_lock(spu); /* Save, Step 1. */ + rc = __do_spu_save(prev, spu); /* Save, Steps 2-53. */ + if (rc != 0) { + harvest(prev, spu); + } + rc = __do_spu_restore(new, spu); + release_spu_lock(spu); + + return rc; } static void init_prob(struct spu_state *csa) diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h index d1d537de4f..989a068814 100644 --- a/include/asm-powerpc/spu_csa.h +++ b/include/asm-powerpc/spu_csa.h @@ -200,7 +200,6 @@ struct spu_priv2_collapsed { u64 spu_chnlcnt_RW; u64 spu_chnldata_RW; u64 spu_cfg_RW; - u64 spu_pm_trace_tag_status_RW; u64 spu_tag_status_query_RW; u64 spu_cmd_buf1_RW; u64 spu_cmd_buf2_RW; -- 2.39.5