From 7a8d29cec7a53cf1a29dc5055aa9d1fa0f95830f Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 13 Aug 2006 23:46:44 +0200 Subject: [PATCH] i2c-stub: Chip address as a module parameter i2c-stub: Chip address as a module parameter Add a mandatory chip_addr parameter to i2c-stub. This parameter defines to which chip address the driver will respond, instead of reponding to all addresses as before. The idea is to prevent the users from loading i2c-stub at random and being then confused by the results of sensors-detect or other user-space tools. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/i2c-stub | 15 +++++++++++++-- drivers/i2c/busses/i2c-stub.c | 19 ++++++++++++++++++- 2 files changed, 31 insertions(+), 3 deletions(-) diff --git a/Documentation/i2c/i2c-stub b/Documentation/i2c/i2c-stub index d6dcb138ab..9cc081e697 100644 --- a/Documentation/i2c/i2c-stub +++ b/Documentation/i2c/i2c-stub @@ -6,9 +6,12 @@ This module is a very simple fake I2C/SMBus driver. It implements four types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, and (r/w) word data. +You need to provide a chip address as a module parameter when loading +this driver, which will then only react to SMBus commands to this address. + No hardware is needed nor associated with this module. It will accept write -quick commands to all addresses; it will respond to the other commands (also -to all addresses) by reading from or writing to an array in memory. It will +quick commands to one address; it will respond to the other commands (also +to one address) by reading from or writing to an array in memory. It will also spam the kernel logs for every command it handles. A pointer register with auto-increment is implemented for all byte @@ -21,6 +24,11 @@ The typical use-case is like this: 3. load the target sensors chip driver module 4. observe its behavior in the kernel log +PARAMETERS: + +int chip_addr: + The SMBus address to emulate a chip at. + CAVEATS: There are independent arrays for byte/data and word/data commands. Depending @@ -33,6 +41,9 @@ If the hardware for your driver has banked registers (e.g. Winbond sensors chips) this module will not work well - although it could be extended to support that pretty easily. +Only one chip address is supported - although this module could be +extended to support more. + If you spam it hard enough, printk can be lossy. This module really wants something like relayfs. diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c index 73f481e93a..8cf374ddd9 100644 --- a/drivers/i2c/busses/i2c-stub.c +++ b/drivers/i2c/busses/i2c-stub.c @@ -27,6 +27,10 @@ #include #include +static unsigned short chip_addr; +module_param(chip_addr, ushort, S_IRUGO); +MODULE_PARM_DESC(chip_addr, "Chip address (between 0x03 and 0x77)\n"); + static u8 stub_pointer; static u8 stub_bytes[256]; static u16 stub_words[256]; @@ -37,6 +41,9 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, { s32 ret; + if (addr != chip_addr) + return -ENODEV; + switch (size) { case I2C_SMBUS_QUICK: @@ -122,7 +129,17 @@ static struct i2c_adapter stub_adapter = { static int __init i2c_stub_init(void) { - printk(KERN_INFO "i2c-stub loaded\n"); + if (!chip_addr) { + printk(KERN_ERR "i2c-stub: Please specify a chip address\n"); + return -ENODEV; + } + if (chip_addr < 0x03 || chip_addr > 0x77) { + printk(KERN_ERR "i2c-stub: Invalid chip address 0x%02x\n", + chip_addr); + return -EINVAL; + } + + printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n", chip_addr); return i2c_add_adapter(&stub_adapter); } -- 2.39.5