From 7762635547ad31ecb045e7073989e76ae13e6c54 Mon Sep 17 00:00:00 2001 From: Ben Cahill Date: Thu, 29 Nov 2007 11:09:44 +0800 Subject: [PATCH] iwl4965: add comments to rate scaling code Add comments to rate scaling code. Signed-off-by: Ben Cahill Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 467 +++++++++++++++++--- drivers/net/wireless/iwlwifi/iwl-4965-rs.h | 45 +- drivers/net/wireless/iwlwifi/iwl-4965.h | 2 +- drivers/net/wireless/iwlwifi/iwl4965-base.c | 3 + 4 files changed, 442 insertions(+), 75 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index 8d3d9f72a8..218c5a355d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -47,13 +47,12 @@ #define IWL_NUMBER_TRY 1 #define IWL_HT_NUMBER_TRY 3 -#define IWL_RATE_MAX_WINDOW 62 -#define IWL_RATE_HIGH_TH 10880 -#define IWL_RATE_MIN_FAILURE_TH 6 -#define IWL_RATE_MIN_SUCCESS_TH 8 -#define IWL_RATE_DECREASE_TH 1920 -#define IWL_RATE_INCREASE_TH 8960 -#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ) /*2 seconds */ +#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ +#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ +#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ + +/* max time to accum history 2 seconds */ +#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ) static u8 rs_ht_to_legacy[] = { IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, @@ -69,54 +68,74 @@ struct iwl4965_rate { u32 rate_n_flags; } __attribute__ ((packed)); +/** + * struct iwl4965_rate_scale_data -- tx success history for one rate + */ struct iwl4965_rate_scale_data { - u64 data; - s32 success_counter; - s32 success_ratio; - s32 counter; - s32 average_tpt; + u64 data; /* bitmap of successful frames */ + s32 success_counter; /* number of frames successful */ + s32 success_ratio; /* per-cent * 128 */ + s32 counter; /* number of frames attempted */ + s32 average_tpt; /* success ratio * expected throughput */ unsigned long stamp; }; +/** + * struct iwl4965_scale_tbl_info -- tx params and success history for all rates + * + * There are two of these in struct iwl_rate_scale_priv, + * one for "active", and one for "search". + */ struct iwl4965_scale_tbl_info { enum iwl4965_table_type lq_type; enum iwl4965_antenna_type antenna_type; - u8 is_SGI; - u8 is_fat; - u8 is_dup; - u8 action; - s32 *expected_tpt; - struct iwl4965_rate current_rate; - struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; + u8 is_SGI; /* 1 = short guard interval */ + u8 is_fat; /* 1 = 40 MHz channel width */ + u8 is_dup; /* 1 = duplicated data streams */ + u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ + s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ + struct iwl4965_rate current_rate; /* rate_n_flags, uCode API format */ + struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ }; +/** + * struct iwl_rate_scale_priv -- driver's rate scaling private structure + * + * Pointer to this gets passed back and forth between driver and mac80211. + */ struct iwl4965_rate_scale_priv { - u8 active_tbl; - u8 enable_counter; - u8 stay_in_tbl; - u8 search_better_tbl; + u8 active_tbl; /* index of active table, range 0-1 */ + u8 enable_counter; /* indicates HT mode */ + u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ + u8 search_better_tbl; /* 1: currently trying alternate mode */ s32 last_tpt; + + /* The following determine when to search for a new mode */ u32 table_count_limit; - u32 max_failure_limit; - u32 max_success_limit; + u32 max_failure_limit; /* # failed frames before new search */ + u32 max_success_limit; /* # successful frames before new search */ u32 table_count; - u32 total_failed; - u32 total_success; - u32 flush_timer; - u8 action_counter; + u32 total_failed; /* total failed frames, any/all rates */ + u32 total_success; /* total successful frames, any/all rates */ + u32 flush_timer; /* time staying in mode before new search */ + + u8 action_counter; /* # mode-switch actions tried */ u8 antenna; u8 valid_antenna; u8 is_green; u8 is_dup; u8 phymode; u8 ibss_sta_added; + + /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ u32 supp_rates; u16 active_rate; u16 active_siso_rate; u16 active_mimo_rate; u16 active_rate_basic; + struct iwl4965_link_quality_cmd lq; - struct iwl4965_scale_tbl_info lq_info[LQ_SIZE]; + struct iwl4965_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ #ifdef CONFIG_MAC80211_DEBUGFS struct dentry *rs_sta_dbgfs_scale_table_file; struct dentry *rs_sta_dbgfs_stats_table_file; @@ -142,6 +161,12 @@ static void rs_dbgfs_set_mcs(struct iwl4965_rate_scale_priv *rs_priv, struct iwl4965_rate *mcs, int index) {} #endif + +/* + * Expected throughput metrics for following rates: + * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits + * "G" is the only table that supports CCK (the first 4 rates). + */ static s32 expected_tpt_A[IWL_RATE_COUNT] = { 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186 }; @@ -244,6 +269,13 @@ static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window) window->stamp = 0; } +/** + * rs_collect_tx_data - Update the success/failure sliding window + * + * We keep a sliding window of the last 62 packets transmitted + * at this rate. window->data contains the bitmask of successful + * packets. + */ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, int scale_index, s32 tpt, u32 status) { @@ -255,10 +287,18 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) return -EINVAL; + /* Select data for current tx bit rate */ window = &(windows[scale_index]); + /* + * Keep track of only the latest 62 tx frame attempts in this rate's + * history window; anything older isn't really relevant any more. + * If we have filled up the sliding window, drop the oldest attempt; + * if the oldest attempt (highest bit in bitmap) shows "success", + * subtract "1" from the success counter (this is the main reason + * we keep these bitmaps!). + */ if (window->counter >= win_size) { - window->counter = win_size - 1; mask = 1; mask = (mask << (win_size - 1)); @@ -268,7 +308,11 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, } } + /* Increment frames-attempted counter */ window->counter = window->counter + 1; + + /* Shift bitmap by one frame (throw away oldest history), + * OR in "1", and increment "success" if this frame was successful. */ mask = window->data; window->data = (mask << 1); if (status != 0) { @@ -276,6 +320,7 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, window->data |= 0x1; } + /* Calculate current success ratio, avoid divide-by-0! */ if (window->counter > 0) window->success_ratio = 128 * (100 * window->success_counter) / window->counter; @@ -284,17 +329,22 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, fail_count = window->counter - window->success_counter; + /* Calculate average throughput, if we have enough history. */ if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) window->average_tpt = (window->success_ratio * tpt + 64) / 128; else window->average_tpt = IWL_INVALID_VALUE; + /* Tag this window as having been updated */ window->stamp = jiffies; return 0; } +/* + * Fill uCode API rate_n_flags field, based on "search" or "active" table. + */ static void rs_mcs_from_tbl(struct iwl4965_rate *mcs_rate, struct iwl4965_scale_tbl_info *tbl, int index, u8 use_green) @@ -349,6 +399,10 @@ static void rs_mcs_from_tbl(struct iwl4965_rate *mcs_rate, } } +/* + * Interpret uCode API's rate_n_flags format, + * fill "search" or "active" tx mode table. + */ static int rs_get_tbl_info_from_mcs(const struct iwl4965_rate *mcs_rate, int phymode, struct iwl4965_scale_tbl_info *tbl, int *rate_idx) @@ -362,11 +416,12 @@ static int rs_get_tbl_info_from_mcs(const struct iwl4965_rate *mcs_rate, *rate_idx = -1; return -EINVAL; } - tbl->is_SGI = 0; + tbl->is_SGI = 0; /* default legacy setup */ tbl->is_fat = 0; tbl->is_dup = 0; - tbl->antenna_type = ANT_BOTH; + tbl->antenna_type = ANT_BOTH; /* default MIMO setup */ + /* legacy rate format */ if (!(mcs_rate->rate_n_flags & RATE_MCS_HT_MSK)) { ant_msk = (mcs_rate->rate_n_flags & RATE_MCS_ANT_AB_MSK); @@ -386,6 +441,7 @@ static int rs_get_tbl_info_from_mcs(const struct iwl4965_rate *mcs_rate, } *rate_idx = index; + /* HT rate format, SISO (might be 20 MHz legacy or 40 MHz fat width) */ } else if (iwl4965_rate_get_rate(mcs_rate->rate_n_flags) <= IWL_RATE_SISO_60M_PLCP) { tbl->lq_type = LQ_SISO; @@ -410,6 +466,8 @@ static int rs_get_tbl_info_from_mcs(const struct iwl4965_rate *mcs_rate, tbl->is_dup = 1; *rate_idx = index; + + /* HT rate format, MIMO (might be 20 MHz legacy or 40 MHz fat width) */ } else { tbl->lq_type = LQ_MIMO; if (mcs_rate->rate_n_flags & RATE_MCS_SGI_MSK) @@ -564,8 +622,9 @@ static void rs_get_lower_rate(struct iwl4965_rate_scale_priv *lq_data, rs_get_supported_rates(lq_data, NULL, tbl->lq_type, &rate_mask); - /* mask with station rate restriction */ + /* Mask with station rate restriction */ if (is_legacy(tbl->lq_type)) { + /* supp_rates has no CCK bits in A mode */ if (lq_data->phymode == (u8) MODE_IEEE80211A) rate_mask = (u16)(rate_mask & (lq_data->supp_rates << IWL_FIRST_OFDM_RATE)); @@ -573,7 +632,7 @@ static void rs_get_lower_rate(struct iwl4965_rate_scale_priv *lq_data, rate_mask = (u16)(rate_mask & lq_data->supp_rates); } - /* if we did switched from HT to legacy check current rate */ + /* If we switched from HT to legacy, check current rate */ if (switch_to_legacy && (rate_mask & (1 << scale_index))) { rs_mcs_from_tbl(mcs_rate, tbl, scale_index, is_green); return; @@ -588,6 +647,9 @@ static void rs_get_lower_rate(struct iwl4965_rate_scale_priv *lq_data, rs_mcs_from_tbl(mcs_rate, tbl, scale_index, is_green); } +/* + * mac80211 sends us Tx status + */ static void rs_tx_status(void *priv_rate, struct net_device *dev, struct sk_buff *skb, @@ -641,11 +703,14 @@ static void rs_tx_status(void *priv_rate, table = &lq->lq; active_index = lq->active_tbl; + /* Get mac80211 antenna info */ lq->antenna = (lq->valid_antenna & local->hw.conf.antenna_sel_tx); if (!lq->antenna) lq->antenna = lq->valid_antenna; + /* Ignore mac80211 antenna info for now */ lq->antenna = lq->valid_antenna; + curr_tbl = &(lq->lq_info[active_index]); search_tbl = &(lq->lq_info[(1 - active_index)]); window = (struct iwl4965_rate_scale_data *) @@ -664,6 +729,14 @@ static void rs_tx_status(void *priv_rate, return; } + /* + * Ignore this Tx frame response if its initial rate doesn't match + * that of latest Link Quality command. There may be stragglers + * from a previous Link Quality command, but we're no longer interested + * in those; they're either from the "active" mode while we're trying + * to check "search" mode, or a prior "search" mode after we've moved + * to a new "search" mode (which might become the new "active" mode). + */ if (retries && (tx_mcs.rate_n_flags != le32_to_cpu(table->rs_table[0].rate_n_flags))) { @@ -674,12 +747,17 @@ static void rs_tx_status(void *priv_rate, return; } + /* Update frame history window with "failure" for each Tx retry. */ while (retries) { + /* Look up the rate and other info used for each tx attempt. + * Each tx attempt steps one entry deeper in the rate table. */ tx_mcs.rate_n_flags = le32_to_cpu(table->rs_table[index].rate_n_flags); rs_get_tbl_info_from_mcs(&tx_mcs, priv->phymode, &tbl_type, &rs_index); + /* If type matches "search" table, + * add failure to "search" history */ if ((tbl_type.lq_type == search_tbl->lq_type) && (tbl_type.antenna_type == search_tbl->antenna_type) && (tbl_type.is_SGI == search_tbl->is_SGI)) { @@ -687,8 +765,10 @@ static void rs_tx_status(void *priv_rate, tpt = search_tbl->expected_tpt[rs_index]; else tpt = 0; - rs_collect_tx_data(search_win, - rs_index, tpt, 0); + rs_collect_tx_data(search_win, rs_index, tpt, 0); + + /* Else if type matches "current/active" table, + * add failure to "current/active" history */ } else if ((tbl_type.lq_type == curr_tbl->lq_type) && (tbl_type.antenna_type == curr_tbl->antenna_type) && (tbl_type.is_SGI == curr_tbl->is_SGI)) { @@ -698,6 +778,9 @@ static void rs_tx_status(void *priv_rate, tpt = 0; rs_collect_tx_data(window, rs_index, tpt, 0); } + + /* If not searching for a new mode, increment failed counter + * ... this helps determine when to start searching again */ if (lq->stay_in_tbl) lq->total_failed++; --retries; @@ -705,6 +788,11 @@ static void rs_tx_status(void *priv_rate, } + /* + * Find (by rate) the history window to update with final Tx attempt; + * if Tx was successful first try, use original rate, + * else look up the rate that was, finally, successful. + */ if (!tx_resp->retry_count) tx_mcs.rate_n_flags = tx_resp->control.tx_rate; else @@ -714,11 +802,14 @@ static void rs_tx_status(void *priv_rate, rs_get_tbl_info_from_mcs(&tx_mcs, priv->phymode, &tbl_type, &rs_index); + /* Update frame history window with "success" if Tx got ACKed ... */ if (tx_resp->flags & IEEE80211_TX_STATUS_ACK) status = 1; else status = 0; + /* If type matches "search" table, + * add final tx status to "search" history */ if ((tbl_type.lq_type == search_tbl->lq_type) && (tbl_type.antenna_type == search_tbl->antenna_type) && (tbl_type.is_SGI == search_tbl->is_SGI)) { @@ -728,6 +819,9 @@ static void rs_tx_status(void *priv_rate, tpt = 0; rs_collect_tx_data(search_win, rs_index, tpt, status); + + /* Else if type matches "current/active" table, + * add final tx status to "current/active" history */ } else if ((tbl_type.lq_type == curr_tbl->lq_type) && (tbl_type.antenna_type == curr_tbl->antenna_type) && (tbl_type.is_SGI == curr_tbl->is_SGI)) { @@ -738,6 +832,8 @@ static void rs_tx_status(void *priv_rate, rs_collect_tx_data(window, rs_index, tpt, status); } + /* If not searching for new mode, increment success/failed counter + * ... these help determine when to start searching again */ if (lq->stay_in_tbl) { if (status) lq->total_success++; @@ -745,6 +841,7 @@ static void rs_tx_status(void *priv_rate, lq->total_failed++; } + /* See if there's a better rate or modulation mode to try. */ rs_rate_scale_perform(priv, dev, hdr, sta); sta_info_put(sta); return; @@ -774,11 +871,19 @@ static u8 rs_is_other_ant_connected(u8 valid_antenna, return 0; } +/* + * Begin a period of staying with a selected modulation mode. + * Set "stay_in_tbl" flag to prevent any mode switches. + * Set frame tx success limits according to legacy vs. high-throughput, + * and reset overall (spanning all rates) tx success history statistics. + * These control how long we stay using same modulation mode before + * searching for a new mode. + */ static void rs_set_stay_in_table(u8 is_legacy, struct iwl4965_rate_scale_priv *lq_data) { IWL_DEBUG_HT("we are staying in the same table\n"); - lq_data->stay_in_tbl = 1; + lq_data->stay_in_tbl = 1; /* only place this gets set */ if (is_legacy) { lq_data->table_count_limit = IWL_LEGACY_TABLE_COUNT; lq_data->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; @@ -793,6 +898,9 @@ static void rs_set_stay_in_table(u8 is_legacy, lq_data->total_success = 0; } +/* + * Find correct throughput table for given mode of modulation + */ static void rs_get_expected_tpt_table(struct iwl4965_rate_scale_priv *lq_data, struct iwl4965_scale_tbl_info *tbl) { @@ -827,17 +935,33 @@ static void rs_get_expected_tpt_table(struct iwl4965_rate_scale_priv *lq_data, } #ifdef CONFIG_IWL4965_HT +/* + * Find starting rate for new "search" high-throughput mode of modulation. + * Goal is to find lowest expected rate (under perfect conditions) that is + * above the current measured throughput of "active" mode, to give new mode + * a fair chance to prove itself without too many challenges. + * + * This gets called when transitioning to more aggressive modulation + * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive + * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need + * to decrease to match "active" throughput. When moving from MIMO to SISO, + * bit rate will typically need to increase, but not if performance was bad. + */ static s32 rs_get_best_rate(struct iwl4965_priv *priv, struct iwl4965_rate_scale_priv *lq_data, - struct iwl4965_scale_tbl_info *tbl, + struct iwl4965_scale_tbl_info *tbl, /* "search" */ u16 rate_mask, s8 index, s8 rate) { + /* "active" values */ struct iwl4965_scale_tbl_info *active_tbl = &(lq_data->lq_info[lq_data->active_tbl]); - s32 new_rate, high, low, start_hi; s32 active_sr = active_tbl->win[index].success_ratio; - s32 *tpt_tbl = tbl->expected_tpt; s32 active_tpt = active_tbl->expected_tpt[index]; + + /* expected "search" throughput */ + s32 *tpt_tbl = tbl->expected_tpt; + + s32 new_rate, high, low, start_hi; u16 high_low; new_rate = high = low = start_hi = IWL_RATE_INVALID; @@ -848,6 +972,21 @@ static s32 rs_get_best_rate(struct iwl4965_priv *priv, low = high_low & 0xff; high = (high_low >> 8) & 0xff; + /* + * Lower the "search" bit rate, to give new "search" mode + * approximately the same throughput as "active" if: + * + * 1) "Active" mode has been working modestly well (but not + * great), and expected "search" throughput (under perfect + * conditions) at candidate rate is above the actual + * measured "active" throughput (but less than expected + * "active" throughput under perfect conditions). + * OR + * 2) "Active" mode has been working perfectly or very well + * and expected "search" throughput (under perfect + * conditions) at candidate rate is above expected + * "active" throughput (under perfect conditions). + */ if ((((100 * tpt_tbl[rate]) > lq_data->last_tpt) && ((active_sr > IWL_RATE_DECREASE_TH) && (active_sr <= IWL_RATE_HIGH_TH) && @@ -855,21 +994,38 @@ static s32 rs_get_best_rate(struct iwl4965_priv *priv, ((active_sr >= IWL_RATE_SCALE_SWITCH) && (tpt_tbl[rate] > active_tpt))) { + /* (2nd or later pass) + * If we've already tried to raise the rate, and are + * now trying to lower it, use the higher rate. */ if (start_hi != IWL_RATE_INVALID) { new_rate = start_hi; break; } + new_rate = rate; + + /* Loop again with lower rate */ if (low != IWL_RATE_INVALID) rate = low; + + /* Lower rate not available, use the original */ else break; + + /* Else try to raise the "search" rate to match "active" */ } else { + /* (2nd or later pass) + * If we've already tried to lower the rate, and are + * now trying to raise it, use the lower rate. */ if (new_rate != IWL_RATE_INVALID) break; + + /* Loop again with higher rate */ else if (high != IWL_RATE_INVALID) { start_hi = high; rate = high; + + /* Higher rate not available, use the original */ } else { new_rate = rate; break; @@ -886,6 +1042,9 @@ static inline u8 rs_is_both_ant_supp(u8 valid_antenna) return (rs_is_ant_connected(valid_antenna, ANT_BOTH)); } +/* + * Set up search table for MIMO + */ static int rs_switch_to_mimo(struct iwl4965_priv *priv, struct iwl4965_rate_scale_priv *lq_data, struct iwl4965_scale_tbl_info *tbl, int index) @@ -906,6 +1065,7 @@ static int rs_switch_to_mimo(struct iwl4965_priv *priv, if (priv->current_assoc_ht.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC) return -1; + /* Need both Tx chains/antennas to support MIMO */ if (!rs_is_both_ant_supp(lq_data->antenna)) return -1; @@ -943,6 +1103,9 @@ static int rs_switch_to_mimo(struct iwl4965_priv *priv, #endif /*CONFIG_IWL4965_HT */ } +/* + * Set up search table for SISO + */ static int rs_switch_to_siso(struct iwl4965_priv *priv, struct iwl4965_rate_scale_priv *lq_data, struct iwl4965_scale_tbl_info *tbl, int index) @@ -999,6 +1162,9 @@ static int rs_switch_to_siso(struct iwl4965_priv *priv, #endif /*CONFIG_IWL4965_HT */ } +/* + * Try to switch to new modulation mode from legacy + */ static int rs_move_legacy_other(struct iwl4965_priv *priv, struct iwl4965_rate_scale_priv *lq_data, int index) @@ -1020,12 +1186,17 @@ static int rs_move_legacy_other(struct iwl4965_priv *priv, search_tbl->lq_type = LQ_NONE; lq_data->action_counter++; + + /* Don't change antenna if success has been great */ if (window->success_ratio >= IWL_RS_GOOD_RATIO) break; + + /* Don't change antenna if other one is not connected */ if (!rs_is_other_ant_connected(lq_data->antenna, tbl->antenna_type)) break; + /* Set up search table to try other antenna */ memcpy(search_tbl, tbl, sz); rs_toggle_antenna(&(search_tbl->current_rate), @@ -1036,6 +1207,8 @@ static int rs_move_legacy_other(struct iwl4965_priv *priv, case IWL_LEGACY_SWITCH_SISO: IWL_DEBUG_HT("LQ: Legacy switch to SISO\n"); + + /* Set up search table to try SISO */ memcpy(search_tbl, tbl, sz); search_tbl->lq_type = LQ_SISO; search_tbl->is_SGI = 0; @@ -1051,6 +1224,8 @@ static int rs_move_legacy_other(struct iwl4965_priv *priv, break; case IWL_LEGACY_SWITCH_MIMO: IWL_DEBUG_HT("LQ: Legacy switch MIMO\n"); + + /* Set up search table to try MIMO */ memcpy(search_tbl, tbl, sz); search_tbl->lq_type = LQ_MIMO; search_tbl->is_SGI = 0; @@ -1083,6 +1258,9 @@ static int rs_move_legacy_other(struct iwl4965_priv *priv, } +/* + * Try to switch to new modulation mode from SISO + */ static int rs_move_siso_to_other(struct iwl4965_priv *priv, struct iwl4965_rate_scale_priv *lq_data, int index) @@ -1173,6 +1351,9 @@ static int rs_move_siso_to_other(struct iwl4965_priv *priv, return 0; } +/* + * Try to switch to new modulation mode from MIMO + */ static int rs_move_mimo_to_other(struct iwl4965_priv *priv, struct iwl4965_rate_scale_priv *lq_data, int index) @@ -1193,6 +1374,8 @@ static int rs_move_mimo_to_other(struct iwl4965_priv *priv, case IWL_MIMO_SWITCH_ANTENNA_A: case IWL_MIMO_SWITCH_ANTENNA_B: IWL_DEBUG_HT("LQ: MIMO SWITCH TO SISO\n"); + + /* Set up new search table for SISO */ memcpy(search_tbl, tbl, sz); search_tbl->lq_type = LQ_SISO; search_tbl->is_SGI = 0; @@ -1212,6 +1395,8 @@ static int rs_move_mimo_to_other(struct iwl4965_priv *priv, case IWL_MIMO_SWITCH_GI: IWL_DEBUG_HT("LQ: MIMO SWITCH TO GI\n"); + + /* Set up new search table for MIMO */ memcpy(search_tbl, tbl, sz); search_tbl->lq_type = LQ_MIMO; search_tbl->antenna_type = ANT_BOTH; @@ -1221,6 +1406,13 @@ static int rs_move_mimo_to_other(struct iwl4965_priv *priv, else search_tbl->is_SGI = 1; lq_data->search_better_tbl = 1; + + /* + * If active table already uses the fastest possible + * modulation (dual stream with short guard interval), + * and it's working well, there's no need to look + * for a better type of modulation! + */ if ((tbl->lq_type == LQ_MIMO) && (tbl->is_SGI)) { s32 tpt = lq_data->last_tpt / 100; @@ -1253,6 +1445,13 @@ static int rs_move_mimo_to_other(struct iwl4965_priv *priv, } +/* + * Check whether we should continue using same modulation mode, or + * begin search for a new mode, based on: + * 1) # tx successes or failures while using this mode + * 2) # times calling this function + * 3) elapsed time in this mode (not used, for now) + */ static void rs_stay_in_table(struct iwl4965_rate_scale_priv *lq_data) { struct iwl4965_scale_tbl_info *tbl; @@ -1264,15 +1463,27 @@ static void rs_stay_in_table(struct iwl4965_rate_scale_priv *lq_data) tbl = &(lq_data->lq_info[active_tbl]); + /* If we've been disallowing search, see if we should now allow it */ if (lq_data->stay_in_tbl) { + /* Elapsed time using current modulation mode */ if (lq_data->flush_timer) flush_interval_passed = time_after(jiffies, (unsigned long)(lq_data->flush_timer + IWL_RATE_SCALE_FLUSH_INTVL)); + /* For now, disable the elapsed time criterion */ flush_interval_passed = 0; + + /* + * Check if we should allow search for new modulation mode. + * If many frames have failed or succeeded, or we've used + * this same modulation for a long time, allow search, and + * reset history stats that keep track of whether we should + * allow a new search. Also (below) reset all bitmaps and + * stats in active history. + */ if ((lq_data->total_failed > lq_data->max_failure_limit) || (lq_data->total_success > lq_data->max_success_limit) || ((!lq_data->search_better_tbl) && (lq_data->flush_timer) @@ -1281,10 +1492,19 @@ static void rs_stay_in_table(struct iwl4965_rate_scale_priv *lq_data) lq_data->total_failed, lq_data->total_success, flush_interval_passed); - lq_data->stay_in_tbl = 0; + + /* Allow search for new mode */ + lq_data->stay_in_tbl = 0; /* only place reset */ lq_data->total_failed = 0; lq_data->total_success = 0; lq_data->flush_timer = 0; + + /* + * Else if we've used this modulation mode enough repetitions + * (regardless of elapsed time or success/failure), reset + * history bitmaps and rate-specific stats for all rates in + * active table. + */ } else { lq_data->table_count++; if (lq_data->table_count >= @@ -1298,6 +1518,9 @@ static void rs_stay_in_table(struct iwl4965_rate_scale_priv *lq_data) } } + /* If transitioning to allow "search", reset all history + * bitmaps and stats in active table (this will become the new + * "search" table). */ if (!lq_data->stay_in_tbl) { for (i = 0; i < IWL_RATE_COUNT; i++) rs_rate_scale_clear_window(&(tbl->win[i])); @@ -1305,6 +1528,9 @@ static void rs_stay_in_table(struct iwl4965_rate_scale_priv *lq_data) } } +/* + * Do rate scaling and search for new modulation mode. + */ static void rs_rate_scale_perform(struct iwl4965_priv *priv, struct net_device *dev, struct ieee80211_hdr *hdr, @@ -1350,6 +1576,11 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, } lq_data = (struct iwl4965_rate_scale_priv *)sta->rate_ctrl_priv; + /* + * Select rate-scale / modulation-mode table to work with in + * the rest of this function: "search" if searching for better + * modulation mode, or "active" if doing rate scaling within a mode. + */ if (!lq_data->search_better_tbl) active_tbl = lq_data->active_tbl; else @@ -1358,11 +1589,13 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, tbl = &(lq_data->lq_info[active_tbl]); is_green = lq_data->is_green; + /* current tx rate */ index = sta->last_txrate; IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index, tbl->lq_type); + /* rates available for this association, and for modulation mode */ rs_get_supported_rates(lq_data, hdr, tbl->lq_type, &rate_mask); @@ -1371,6 +1604,7 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, /* mask with station rate restriction */ if (is_legacy(tbl->lq_type)) { if (lq_data->phymode == (u8) MODE_IEEE80211A) + /* supp_rates has no CCK bits in A mode */ rate_scale_index_msk = (u16) (rate_mask & (lq_data->supp_rates << IWL_FIRST_OFDM_RATE)); else @@ -1383,11 +1617,13 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, if (!rate_scale_index_msk) rate_scale_index_msk = rate_mask; + /* If current rate is no longer supported on current association, + * or user changed preferences for rates, find a new supported rate. */ if (index < 0 || !((1 << index) & rate_scale_index_msk)) { index = IWL_INVALID_VALUE; update_lq = 1; - /* get the lowest available rate */ + /* get the highest available rate */ for (i = 0; i <= IWL_RATE_COUNT; i++) { if ((1 << i) & rate_scale_index_msk) index = i; @@ -1399,11 +1635,19 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, } } + /* Get expected throughput table and history window for current rate */ if (!tbl->expected_tpt) rs_get_expected_tpt_table(lq_data, tbl); window = &(tbl->win[index]); + /* + * If there is not enough history to calculate actual average + * throughput, keep analyzing results of more tx frames, without + * changing rate or mode (bypass most of the rest of this function). + * Set up new rate table in uCode only if old rate is not supported + * in current association (use new rate found above). + */ fail_count = window->counter - window->success_counter; if (((fail_count < IWL_RATE_MIN_FAILURE_TH) && (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) @@ -1411,8 +1655,15 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, IWL_DEBUG_RATE("LQ: still below TH succ %d total %d " "for index %d\n", window->success_counter, window->counter, index); + + /* Can't calculate this yet; not enough history */ window->average_tpt = IWL_INVALID_VALUE; + + /* Should we stay with this modulation mode, + * or search for a new one? */ rs_stay_in_table(lq_data); + + /* Set up new rate table in uCode, if needed */ if (update_lq) { rs_mcs_from_tbl(&mcs_rate, tbl, index, is_green); rs_fill_link_cmd(lq_data, &mcs_rate, &lq_data->lq); @@ -1420,13 +1671,19 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, } goto out; + /* Else we have enough samples; calculate estimate of + * actual average throughput */ } else window->average_tpt = ((window->success_ratio * tbl->expected_tpt[index] + 64) / 128); + /* If we are searching for better modulation mode, check success. */ if (lq_data->search_better_tbl) { int success_limit = IWL_RATE_SCALE_SWITCH; + /* If good success, continue using the "search" mode; + * no need to send new link quality command, since we're + * continuing to use the setup that we've been trying. */ if ((window->success_ratio > success_limit) || (window->average_tpt > lq_data->last_tpt)) { if (!is_legacy(tbl->lq_type)) { @@ -1438,55 +1695,78 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, lq_data->last_tpt); lq_data->enable_counter = 1; } + /* Swap tables; "search" becomes "active" */ lq_data->active_tbl = active_tbl; current_tpt = window->average_tpt; + + /* Else poor success; go back to mode in "active" table */ } else { + /* Nullify "search" table */ tbl->lq_type = LQ_NONE; + + /* Revert to "active" table */ active_tbl = lq_data->active_tbl; tbl = &(lq_data->lq_info[active_tbl]); + /* Revert to "active" rate and throughput info */ index = iwl4965_rate_index_from_plcp( tbl->current_rate.rate_n_flags); + current_tpt = lq_data->last_tpt; + /* Need to set up a new rate table in uCode */ update_lq = 1; - current_tpt = lq_data->last_tpt; IWL_DEBUG_HT("XXY GO BACK TO OLD TABLE\n"); } + + /* Either way, we've made a decision; modulation mode + * search is done, allow rate adjustment next time. */ lq_data->search_better_tbl = 0; - done_search = 1; + done_search = 1; /* Don't switch modes below! */ goto lq_update; } + /* (Else) not in search of better modulation mode, try for better + * starting rate, while staying in this mode. */ high_low = rs_get_adjacent_rate(index, rate_scale_index_msk, tbl->lq_type); low = high_low & 0xff; high = (high_low >> 8) & 0xff; + /* Collect measured throughputs for current and adjacent rates */ current_tpt = window->average_tpt; - if (low != IWL_RATE_INVALID) low_tpt = tbl->win[low].average_tpt; - if (high != IWL_RATE_INVALID) high_tpt = tbl->win[high].average_tpt; - + /* Assume rate increase */ scale_action = 1; + /* Too many failures, decrease rate */ if ((window->success_ratio <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { IWL_DEBUG_RATE("decrease rate because of low success_ratio\n"); scale_action = -1; + + /* No throughput measured yet for adjacent rates; try increase. */ } else if ((low_tpt == IWL_INVALID_VALUE) && (high_tpt == IWL_INVALID_VALUE)) scale_action = 1; + + /* Both adjacent throughputs are measured, but neither one has better + * throughput; we're using the best rate, don't change it! */ else if ((low_tpt != IWL_INVALID_VALUE) && (high_tpt != IWL_INVALID_VALUE) && (low_tpt < current_tpt) && (high_tpt < current_tpt)) scale_action = 0; + + /* At least one adjacent rate's throughput is measured, + * and may have better performance. */ else { + /* Higher adjacent rate's throughput is measured */ if (high_tpt != IWL_INVALID_VALUE) { + /* Higher rate has better throughput */ if (high_tpt > current_tpt) scale_action = 1; else { @@ -1494,7 +1774,10 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, ("decrease rate because of high tpt\n"); scale_action = -1; } + + /* Lower adjacent rate's throughput is measured */ } else if (low_tpt != IWL_INVALID_VALUE) { + /* Lower rate has better throughput */ if (low_tpt > current_tpt) { IWL_DEBUG_RATE ("decrease rate because of low tpt\n"); @@ -1504,23 +1787,30 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, } } + /* Sanity check; asked for decrease, but success rate or throughput + * has been good at old rate. Don't change it. */ if (scale_action == -1) { if ((low != IWL_RATE_INVALID) && ((window->success_ratio > IWL_RATE_HIGH_TH) || (current_tpt > (100 * tbl->expected_tpt[low])))) scale_action = 0; + + /* Sanity check; asked for increase, but success rate has not been great + * even at old rate, higher rate will be worse. Don't change it. */ } else if ((scale_action == 1) && (window->success_ratio < IWL_RATE_INCREASE_TH)) scale_action = 0; switch (scale_action) { case -1: + /* Decrease starting rate, update uCode's rate table */ if (low != IWL_RATE_INVALID) { update_lq = 1; index = low; } break; case 1: + /* Increase starting rate, update uCode's rate table */ if (high != IWL_RATE_INVALID) { update_lq = 1; index = high; @@ -1528,6 +1818,7 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, break; case 0: + /* No change */ default: break; } @@ -1537,16 +1828,28 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, index, scale_action, low, high, tbl->lq_type); lq_update: + /* Replace uCode's rate table for the destination station. */ if (update_lq) { rs_mcs_from_tbl(&mcs_rate, tbl, index, is_green); rs_fill_link_cmd(lq_data, &mcs_rate, &lq_data->lq); rs_send_lq_cmd(priv, &lq_data->lq, CMD_ASYNC); } + + /* Should we stay with this modulation mode, or search for a new one? */ rs_stay_in_table(lq_data); + /* + * Search for new modulation mode if we're: + * 1) Not changing rates right now + * 2) Not just finishing up a search + * 3) Allowing a new search + */ if (!update_lq && !done_search && !lq_data->stay_in_tbl) { + /* Save current throughput to compare with "search" throughput*/ lq_data->last_tpt = current_tpt; + /* Select a new "search" modulation mode to try. + * If one is found, set up the new "search" table. */ if (is_legacy(tbl->lq_type)) rs_move_legacy_other(priv, lq_data, index); else if (is_siso(tbl->lq_type)) @@ -1554,11 +1857,14 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, else rs_move_mimo_to_other(priv, lq_data, index); + /* If new "search" mode was selected, set up in uCode table */ if (lq_data->search_better_tbl) { + /* Access the "search" table, clear its history. */ tbl = &(lq_data->lq_info[(1 - lq_data->active_tbl)]); for (i = 0; i < IWL_RATE_COUNT; i++) rs_rate_scale_clear_window(&(tbl->win[i])); + /* Use new "search" start rate */ index = iwl4965_rate_index_from_plcp( tbl->current_rate.rate_n_flags); @@ -1568,8 +1874,13 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, &lq_data->lq); rs_send_lq_cmd(priv, &lq_data->lq, CMD_ASYNC); } - tbl1 = &(lq_data->lq_info[lq_data->active_tbl]); + /* If the "active" (non-search) mode was legacy, + * and we've tried switching antennas, + * but we haven't been able to try HT modes (not available), + * stay with best antenna legacy modulation for a while + * before next round of mode comparisons. */ + tbl1 = &(lq_data->lq_info[lq_data->active_tbl]); if (is_legacy(tbl1->lq_type) && #ifdef CONFIG_IWL4965_HT !priv->current_assoc_ht.is_ht && @@ -1580,9 +1891,13 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, rs_set_stay_in_table(1, lq_data); } + /* If we're in an HT mode, and all 3 mode switch actions + * have been tried and compared, stay in this best modulation + * mode for a while before next round of mode comparisons. */ if (lq_data->enable_counter && (lq_data->action_counter >= IWL_ACTION_LIMIT)) { #ifdef CONFIG_IWL4965_HT_AGG + /* If appropriate, set up aggregation! */ if ((lq_data->last_tpt > TID_AGG_TPT_THREHOLD) && (priv->lq_mngr.agg_ctrl.auto_agg)) { priv->lq_mngr.agg_ctrl.tid_retry = @@ -1593,6 +1908,14 @@ static void rs_rate_scale_perform(struct iwl4965_priv *priv, lq_data->action_counter = 0; rs_set_stay_in_table(0, lq_data); } + + /* + * Else, don't search for a new modulation mode. + * Put new timestamp in stay-in-modulation-mode flush timer if: + * 1) Not changing rates right now + * 2) Not just finishing up a search + * 3) flush timer is empty + */ } else { if ((!update_lq) && (!done_search) && (!lq_data->flush_timer)) lq_data->flush_timer = jiffies; @@ -1789,15 +2112,14 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, priv->assoc_station_added = 1; } + /* Find highest tx rate supported by hardware and destination station */ for (i = 0; i < mode->num_rates; i++) { if ((sta->supp_rates & BIT(i)) && (mode->rates[i].flags & IEEE80211_RATE_SUPPORTED)) sta->txrate = i; } sta->last_txrate = sta->txrate; - /* For MODE_IEEE80211A mode cck rate are at end - * rate table - */ + /* For MODE_IEEE80211A, cck rates are at end of rate table */ if (local->hw.conf.phymode == MODE_IEEE80211A) sta->last_txrate += IWL_FIRST_OFDM_RATE; @@ -1810,11 +2132,16 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, crl->active_rate_basic = priv->active_rate_basic; crl->phymode = priv->phymode; #ifdef CONFIG_IWL4965_HT + /* + * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), + * supp_rates[] does not; shift to convert format, force 9 MBits off. + */ crl->active_siso_rate = (priv->current_assoc_ht.supp_rates[0] << 1); crl->active_siso_rate |= (priv->current_assoc_ht.supp_rates[0] & 0x1); crl->active_siso_rate &= ~((u16)0x2); crl->active_siso_rate = crl->active_siso_rate << IWL_FIRST_OFDM_RATE; + /* Same here */ crl->active_mimo_rate = (priv->current_assoc_ht.supp_rates[1] << 1); crl->active_mimo_rate |= (priv->current_assoc_ht.supp_rates[1] & 0x1); crl->active_mimo_rate &= ~((u16)0x2); @@ -1844,11 +2171,14 @@ static void rs_fill_link_cmd(struct iwl4965_rate_scale_priv *lq_data, struct iwl4965_rate new_rate; struct iwl4965_scale_tbl_info tbl_type = { 0 }; + /* Override starting rate (index 0) if needed for debug purposes */ rs_dbgfs_set_mcs(lq_data, tx_mcs, index); + /* Interpret rate_n_flags */ rs_get_tbl_info_from_mcs(tx_mcs, lq_data->phymode, &tbl_type, &rate_idx); + /* How many times should we repeat the initial rate? */ if (is_legacy(tbl_type.lq_type)) { ant_toggle_count = 1; repeat_rate = IWL_NUMBER_TRY; @@ -1857,19 +2187,27 @@ static void rs_fill_link_cmd(struct iwl4965_rate_scale_priv *lq_data, lq_cmd->general_params.mimo_delimiter = is_mimo(tbl_type.lq_type) ? 1 : 0; + + /* Fill 1st table entry (index 0) */ lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(tx_mcs->rate_n_flags); new_rate.rate_n_flags = tx_mcs->rate_n_flags; if (is_mimo(tbl_type.lq_type) || (tbl_type.antenna_type == ANT_MAIN)) - lq_cmd->general_params.single_stream_ant_msk = 1; + lq_cmd->general_params.single_stream_ant_msk + = LINK_QUAL_ANT_A_MSK; else - lq_cmd->general_params.single_stream_ant_msk = 2; + lq_cmd->general_params.single_stream_ant_msk + = LINK_QUAL_ANT_B_MSK; index++; repeat_rate--; + /* Fill rest of rate table */ while (index < LINK_QUAL_MAX_RETRY_NUM) { + /* Repeat initial/next rate. + * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. + * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { if (is_legacy(tbl_type.lq_type)) { if (ant_toggle_count < @@ -1881,7 +2219,10 @@ static void rs_fill_link_cmd(struct iwl4965_rate_scale_priv *lq_data, } } + /* Override next rate if needed for debug purposes */ rs_dbgfs_set_mcs(lq_data, &new_rate, index); + + /* Fill next table entry */ lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate.rate_n_flags); repeat_rate--; @@ -1891,12 +2232,17 @@ static void rs_fill_link_cmd(struct iwl4965_rate_scale_priv *lq_data, rs_get_tbl_info_from_mcs(&new_rate, lq_data->phymode, &tbl_type, &rate_idx); + /* Indicate to uCode which entries might be MIMO. + * If initial rate was MIMO, this will finally end up + * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ if (is_mimo(tbl_type.lq_type)) lq_cmd->general_params.mimo_delimiter = index; + /* Get next rate */ rs_get_lower_rate(lq_data, &tbl_type, rate_idx, use_ht_possible, &new_rate); + /* How many times should we repeat the next rate? */ if (is_legacy(tbl_type.lq_type)) { if (ant_toggle_count < NUM_TRY_BEFORE_ANTENNA_TOGGLE) ant_toggle_count++; @@ -1908,9 +2254,14 @@ static void rs_fill_link_cmd(struct iwl4965_rate_scale_priv *lq_data, } else repeat_rate = IWL_HT_NUMBER_TRY; + /* Don't allow HT rates after next pass. + * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ use_ht_possible = 0; + /* Override next rate if needed for debug purposes */ rs_dbgfs_set_mcs(lq_data, &new_rate, index); + + /* Fill next table entry */ lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate.rate_n_flags); @@ -2006,9 +2357,9 @@ static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, else rs_priv->dbg_fixed.rate_n_flags = 0; - rs_priv->active_rate = 0x0FFF; - rs_priv->active_siso_rate = 0x1FD0; - rs_priv->active_mimo_rate = 0x1FD0; + rs_priv->active_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ + rs_priv->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ + rs_priv->active_mimo_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ IWL_DEBUG_RATE("sta_id %d rate 0x%X\n", rs_priv->lq.sta_id, rs_priv->dbg_fixed.rate_n_flags); @@ -2209,7 +2560,7 @@ int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) /* Display the average rate of all samples taken. * - * NOTE: We multiple # of samples by 2 since the IEEE measurement + * NOTE: We multiply # of samples by 2 since the IEEE measurement * added from iwl4965_rates is actually 2X the rate */ if (samples) count += sprintf(&buf[count], diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h b/drivers/net/wireless/iwlwifi/iwl-4965-rs.h index 4259099eae..86f62d8090 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.h @@ -30,10 +30,10 @@ #include "iwl-4965.h" struct iwl4965_rate_info { - u8 plcp; - u8 plcp_siso; - u8 plcp_mimo; - u8 ieee; + u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ + u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ + u8 plcp_mimo; /* uCode API: IWL_RATE_MIMO_6M_PLCP, etc. */ + u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ u8 prev_ieee; /* previous rate in IEEE speeds */ u8 next_ieee; /* next rate in IEEE speeds */ u8 prev_rs; /* previous rate used in rs algo */ @@ -42,6 +42,7 @@ struct iwl4965_rate_info { u8 next_rs_tgg; /* next rate used in TGG rs algo */ }; +/* For driver (not uCode API) */ enum { IWL_RATE_1M_INDEX = 0, IWL_RATE_2M_INDEX, @@ -83,6 +84,7 @@ enum { #define IWL_RATE_5M_MASK (1<= IWL_FIRST_OFDM_RATE) && (i <= IWL_LAST_OFDM_RATE)) return i; + + /* 4965 legacy rate format, search for match in table */ } else { for (i = 0; i < ARRAY_SIZE(iwl4965_rates); i++) if (iwl4965_rates[i].plcp == (plcp &0xFF)) -- 2.39.5