From 72860b0f3c4a303498c9e16c8a4a38ddf23d56de Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 11:25:03 +0200 Subject: [PATCH] sound: Clean up sound/oss/Kconfig Removed unnecessary dependencies, fix a wrong selection, and make CONFIG_SOUND_OSS menuconfig to simplify. Signed-off-by: Takashi Iwai --- sound/oss/Kconfig | 49 ++++++++++++++++++----------------------------- 1 file changed, 19 insertions(+), 30 deletions(-) diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 3be2dc1025..3394013984 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -7,7 +7,7 @@ config SOUND_BCM_CS4297A tristate "Crystal Sound CS4297a (for Swarm)" - depends on SOUND_PRIME && SIBYTE_SWARM + depends on SIBYTE_SWARM help The BCM91250A has a Crystal CS4297a on synchronous serial port B (in addition to the DB-9 serial port). Say Y or M @@ -17,7 +17,7 @@ config SOUND_BCM_CS4297A config SOUND_VWSND tristate "SGI Visual Workstation Sound" - depends on SOUND_PRIME && X86_VISWS + depends on X86_VISWS help Say Y or M if you have an SGI Visual Workstation and you want to be able to use its on-board audio. Read @@ -26,19 +26,18 @@ config SOUND_VWSND config SOUND_HAL2 tristate "SGI HAL2 sound (EXPERIMENTAL)" - depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL + depends on SGI_IP22 && EXPERIMENTAL help Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to use its on-board A2 audio system. config SOUND_AU1550_AC97 tristate "Au1550/Au1200 AC97 Sound" - select SND_AC97_CODEC - depends on SOUND_PRIME && (SOC_AU1550 || SOC_AU1200) + depends on SOC_AU1550 || SOC_AU1200 config SOUND_TRIDENT tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core" - depends on SOUND_PRIME && PCI + depends on PCI ---help--- Say Y or M if you have a PCI sound card utilizing the Trident 4DWave-DX/NX chipset or your mother board chipset has SiS 7018 @@ -79,7 +78,7 @@ config SOUND_TRIDENT config SOUND_MSNDCLAS tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" - depends on SOUND_PRIME && (m || !STANDALONE) && ISA + depends on (m || !STANDALONE) && ISA help Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or Monterey (not for the Pinnacle or Fiji). @@ -143,7 +142,7 @@ config MSNDCLAS_IO config SOUND_MSNDPIN tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji" - depends on SOUND_PRIME && (m || !STANDALONE) && ISA + depends on (m || !STANDALONE) && ISA help Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji. See for important information @@ -229,7 +228,7 @@ config MSNDPIN_NONPNP configure the card's resources. comment "MSND Pinnacle DSP section will be configured to above parameters." - depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP + depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP config MSNDPIN_CFG hex "MSND Pinnacle config port 250,260,270" @@ -242,7 +241,7 @@ config MSNDPIN_CFG Mode". comment "Pinnacle-specific Device Configuration (0 disables)" - depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP + depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP config MSNDPIN_MPU_IO hex "MSND Pinnacle MPU I/O (e.g. 330)" @@ -294,7 +293,7 @@ config MSNDPIN_JOYSTICK_IO config MSND_FIFOSIZE int "MSND buffer size (kB)" - depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y) + depends on SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y default "128" help Configures the size of each audio buffer, in kilobytes, for @@ -302,9 +301,9 @@ config MSND_FIFOSIZE and Pinnacle). Larger values reduce the chance of data overruns at the expense of overall latency. If unsure, use the default. -config SOUND_OSS +menuconfig SOUND_OSS tristate "OSS sound modules" - depends on SOUND_PRIME && ISA_DMA_API && VIRT_TO_BUS + depends on ISA_DMA_API && VIRT_TO_BUS help OSS is the Open Sound System suite of sound card drivers. They make sound programming easier since they provide a common API. Say Y or @@ -312,16 +311,16 @@ config SOUND_OSS driver for your sound card above, then pick your driver from the list below. +if SOUND_OSS + config SOUND_TRACEINIT bool "Verbose initialisation" - depends on SOUND_OSS help Verbose soundcard initialization -- affects the format of autoprobe and initialization messages at boot time. config SOUND_DMAP bool "Persistent DMA buffers" - depends on SOUND_OSS ---help--- Linux can often have problems allocating DMA buffers for ISA sound cards on machines with more than 16MB of RAM. This is because ISA @@ -338,8 +337,6 @@ config SOUND_DMAP config SOUND_SSCAPE tristate "Ensoniq SoundScape support" - depends on SOUND_OSS - depends on VIRT_TO_BUS help Answer Y if you have a sound card based on the Ensoniq SoundScape chipset. Such cards are being manufactured at least by Ensoniq, Spea @@ -352,13 +349,11 @@ config SOUND_SSCAPE config SOUND_VMIDI tristate "Loopback MIDI device support" - depends on SOUND_OSS help Support for MIDI loopback on port 1 or 2. config SOUND_TRIX tristate "MediaTrix AudioTrix Pro support" - depends on SOUND_OSS help Answer Y if you have the AudioTriX Pro sound card manufactured by MediaTrix. @@ -382,7 +377,6 @@ config TRIX_BOOT_FILE config SOUND_MSS tristate "Microsoft Sound System support" - depends on SOUND_OSS ---help--- Again think carefully before answering Y to this question. It's safe to answer Y if you have the original Windows Sound System card @@ -414,7 +408,6 @@ config SOUND_MSS config SOUND_MPU401 tristate "MPU-401 support (NOT for SB16)" - depends on SOUND_OSS ---help--- Be careful with this question. The MPU401 interface is supported by all sound cards. However, some natively supported cards have their @@ -430,7 +423,6 @@ config SOUND_MPU401 config SOUND_PAS tristate "ProAudioSpectrum 16 support" - depends on SOUND_OSS ---help--- Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio 16 or Logitech SoundMan 16 sound card. Answer N if you have some @@ -452,7 +444,6 @@ config PAS_JOYSTICK config SOUND_PSS tristate "PSS (AD1848, ADSP-2115, ESC614) support" - depends on SOUND_OSS help Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven ADSP-16 or some other card based on the PSS chipset (AD1848 codec + @@ -495,7 +486,6 @@ config PSS_BOOT_FILE config SOUND_SB tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" - depends on SOUND_OSS ---help--- Answer Y if you have an original Sound Blaster card made by Creative Labs or a 100% hardware compatible clone (like the Thunderboard or @@ -522,7 +512,6 @@ config SOUND_SB config SOUND_YM3812 tristate "Yamaha FM synthesizer (YM3812/OPL-3) support" - depends on SOUND_OSS ---help--- Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4). Answering Y is usually a safe and recommended choice, however some @@ -538,7 +527,6 @@ config SOUND_YM3812 config SOUND_UART6850 tristate "6850 UART support" - depends on SOUND_OSS help This option enables support for MIDI interfaces based on the 6850 UART chip. This interface is rarely found on sound cards. It's safe @@ -549,7 +537,6 @@ config SOUND_UART6850 config SOUND_AEDSP16 tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)" - depends on SOUND_OSS ---help--- Answer Y if you have a Gallant's Audio Excel DSP 16 card. This driver supports Audio Excel DSP 16 but not the III nor PnP versions @@ -630,14 +617,14 @@ endchoice config SOUND_VIDC tristate "VIDC 16-bit sound" - depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS + depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) help 16-bit support for the VIDC onboard sound hardware found on Acorn machines. config SOUND_WAVEARTIST tristate "Netwinder WaveArtist" - depends on ARM && SOUND_OSS && ARCH_NETWINDER + depends on ARM && ARCH_NETWINDER help Say Y here to include support for the Rockwell WaveArtist sound system. This driver is mainly for the NetWinder. @@ -646,9 +633,11 @@ config SOUND_KAHLUA tristate "XpressAudio Sound Blaster emulation" depends on SOUND_SB +endif # SOUND_OSS + config SOUND_SH_DAC_AUDIO tristate "SuperH DAC audio support" - depends on SOUND_PRIME && CPU_SH3 + depends on CPU_SH3 config SOUND_SH_DAC_AUDIO_CHANNEL int "DAC channel" -- 2.39.5