From 617bf9a47f017b7e91dab9ef9bdaaeaee24163a7 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 3 Sep 2005 15:55:30 -0700 Subject: [PATCH] [PATCH] ppc32: Remove board support for PCORE Support for the PCORE board is no longer maintained and thus being removed Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/Kconfig | 9 +- arch/ppc/boot/simple/Makefile | 7 - arch/ppc/configs/pcore_defconfig | 716 ------------------------------- arch/ppc/platforms/Makefile | 1 - arch/ppc/platforms/pcore.c | 352 --------------- arch/ppc/platforms/pcore.h | 39 -- arch/ppc/syslib/Makefile | 1 - 7 files changed, 3 insertions(+), 1122 deletions(-) delete mode 100644 arch/ppc/configs/pcore_defconfig delete mode 100644 arch/ppc/platforms/pcore.c delete mode 100644 arch/ppc/platforms/pcore.h diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 770d8f23f6..f88032c65f 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -548,9 +548,6 @@ config CPCI690 help Select CPCI690 if configuring a Force CPCI690 cPCI board. -config PCORE - bool "Force-PowerCore" - config POWERPMC250 bool "Force-PowerPMC250" @@ -757,7 +754,7 @@ config PPC_OF config PPC_GEN550 bool - depends on SANDPOINT || SPRUCE || PPLUS || PCORE || \ + depends on SANDPOINT || SPRUCE || PPLUS || \ PRPMC750 || PRPMC800 || LOPEC || \ (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ 83xx @@ -765,7 +762,7 @@ config PPC_GEN550 config FORCE bool - depends on 6xx && (PCORE || POWERPMC250) + depends on 6xx && POWERPMC250 default y config GT64260 @@ -828,7 +825,7 @@ config EPIC_SERIAL_MODE config MPC10X_BRIDGE bool - depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT + depends on POWERPMC250 || LOPEC || SANDPOINT default y config MPC10X_OPENPIC diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index 7e975aa984..a5bd9f3f40 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -109,7 +109,6 @@ zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \ $(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS) motorola := $(strip $(motorola)) -pcore := $(CONFIG_PCORE)$(CONFIG_POWERPMC250) zimage-$(motorola) := zImage-PPLUS zimageinitrd-$(motorola) := zImage.initrd-PPLUS @@ -119,12 +118,6 @@ zimageinitrd-$(motorola) := zImage.initrd-PPLUS extra.o-$(CONFIG_PPLUS) := prepmap.o extra.o-$(CONFIG_LOPEC) := mpc10x_memory.o - zimage-$(pcore) := zImage-STRIPELF -zimageinitrd-$(pcore) := zImage.initrd-STRIPELF - extra.o-$(pcore) := chrpmap.o - end-$(pcore) := pcore - cacheflag-$(pcore) := -include $(clear_L2_L3) - # Really only valid if CONFIG_6xx=y zimage-$(CONFIG_PPC_PREP) := zImage-PPLUS zimageinitrd-$(CONFIG_PPC_PREP) := zImage.initrd-PPLUS diff --git a/arch/ppc/configs/pcore_defconfig b/arch/ppc/configs/pcore_defconfig deleted file mode 100644 index ed34405a75..0000000000 --- a/arch/ppc/configs/pcore_defconfig +++ /dev/null @@ -1,716 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_ALTIVEC=y -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -CONFIG_PCORE=y -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_GEN550=y -CONFIG_FORCE=y -# CONFIG_MPC10X_STORE_GATHERING is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -# CONFIG_CHR_DEV_SG is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -# CONFIG_IP_NF_MATCH_IPRANGE is not set -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_RECENT is not set -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -# CONFIG_IP_NF_ARP_MANGLE is not set -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -CONFIG_NET_TULIP=y -# CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -# CONFIG_DE4X5 is not set -# CONFIG_WINBOND_840 is not set -# CONFIG_DM9102 is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# -# Input Device Drivers -# - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -CONFIG_CRC32=y - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index c92e917485..ae5a18a719 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_KATANA) += katana.o obj-$(CONFIG_HDPU) += hdpu.o obj-$(CONFIG_MVME5100) += mvme5100.o obj-$(CONFIG_PAL4) += pal4_setup.o pal4_pci.o -obj-$(CONFIG_PCORE) += pcore.o obj-$(CONFIG_POWERPMC250) += powerpmc250.o obj-$(CONFIG_PPLUS) += pplus.o obj-$(CONFIG_PRPMC750) += prpmc750.o diff --git a/arch/ppc/platforms/pcore.c b/arch/ppc/platforms/pcore.c deleted file mode 100644 index d7191630a6..0000000000 --- a/arch/ppc/platforms/pcore.c +++ /dev/null @@ -1,352 +0,0 @@ -/* - * arch/ppc/platforms/pcore_setup.c - * - * Setup routines for Force PCORE boards - * - * Author: Matt Porter - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "pcore.h" - -extern unsigned long loops_per_jiffy; - -static int board_type; - -static inline int __init -pcore_6750_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {9, 10, 11, 12}, /* IDSEL 24 - DEC 21554 */ - {10, 0, 0, 0}, /* IDSEL 25 - DEC 21143 */ - {11, 12, 9, 10}, /* IDSEL 26 - PMC I */ - {12, 9, 10, 11}, /* IDSEL 27 - PMC II */ - {0, 0, 0, 0}, /* IDSEL 28 - unused */ - {0, 0, 9, 0}, /* IDSEL 29 - unused */ - {0, 0, 0, 0}, /* IDSEL 30 - Winbond */ - }; - const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -}; - -static inline int __init -pcore_680_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {9, 10, 11, 12}, /* IDSEL 24 - Sentinel */ - {10, 0, 0, 0}, /* IDSEL 25 - i82559 #1 */ - {11, 12, 9, 10}, /* IDSEL 26 - PMC I */ - {12, 9, 10, 11}, /* IDSEL 27 - PMC II */ - {9, 0, 0, 0}, /* IDSEL 28 - i82559 #2 */ - {0, 0, 0, 0}, /* IDSEL 29 - unused */ - {0, 0, 0, 0}, /* IDSEL 30 - Winbond */ - }; - const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -}; - -void __init -pcore_pcibios_fixup(void) -{ - struct pci_dev *dev; - - if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, - PCI_DEVICE_ID_WINBOND_83C553, - 0))) - { - /* Reroute interrupts both IDE channels to 15 */ - pci_write_config_byte(dev, - PCORE_WINBOND_IDE_INT, - 0xff); - - /* Route INTA-D to IRQ9-12, respectively */ - pci_write_config_word(dev, - PCORE_WINBOND_PCI_INT, - 0x9abc); - - /* - * Set up 8259 edge/level triggering - */ - outb(0x00, PCORE_WINBOND_PRI_EDG_LVL); - outb(0x1e, PCORE_WINBOND_SEC_EDG_LVL); - pci_dev_put(dev); - } -} - -int __init -pcore_find_bridges(void) -{ - struct pci_controller* hose; - int host_bridge, board_type; - - hose = pcibios_alloc_controller(); - if (!hose) - return 0; - - mpc10x_bridge_init(hose, - MPC10X_MEM_MAP_B, - MPC10X_MEM_MAP_B, - MPC10X_MAPB_EUMB_BASE); - - /* Determine board type */ - early_read_config_dword(hose, - 0, - PCI_DEVFN(0,0), - PCI_VENDOR_ID, - &host_bridge); - if (host_bridge == MPC10X_BRIDGE_106) - board_type = PCORE_TYPE_6750; - else /* MPC10X_BRIDGE_107 */ - board_type = PCORE_TYPE_680; - - hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); - - ppc_md.pcibios_fixup = pcore_pcibios_fixup; - ppc_md.pci_swizzle = common_swizzle; - - if (board_type == PCORE_TYPE_6750) - ppc_md.pci_map_irq = pcore_6750_map_irq; - else /* PCORE_TYPE_680 */ - ppc_md.pci_map_irq = pcore_680_map_irq; - - return board_type; -} - -/* Dummy variable to satisfy mpc10x_common.o */ -void *OpenPIC_Addr; - -static int -pcore_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "vendor\t\t: Force Computers\n"); - - if (board_type == PCORE_TYPE_6750) - seq_printf(m, "machine\t\t: PowerCore 6750\n"); - else /* PCORE_TYPE_680 */ - seq_printf(m, "machine\t\t: PowerCore 680\n"); - - seq_printf(m, "L2\t\t: " ); - if (board_type == PCORE_TYPE_6750) - switch (readb(PCORE_DCCR_REG) & PCORE_DCCR_L2_MASK) - { - case PCORE_DCCR_L2_0KB: - seq_printf(m, "nocache"); - break; - case PCORE_DCCR_L2_256KB: - seq_printf(m, "256KB"); - break; - case PCORE_DCCR_L2_1MB: - seq_printf(m, "1MB"); - break; - case PCORE_DCCR_L2_512KB: - seq_printf(m, "512KB"); - break; - default: - seq_printf(m, "error"); - break; - } - else /* PCORE_TYPE_680 */ - switch (readb(PCORE_DCCR_REG) & PCORE_DCCR_L2_MASK) - { - case PCORE_DCCR_L2_2MB: - seq_printf(m, "2MB"); - break; - case PCORE_DCCR_L2_256KB: - seq_printf(m, "reserved"); - break; - case PCORE_DCCR_L2_1MB: - seq_printf(m, "1MB"); - break; - case PCORE_DCCR_L2_512KB: - seq_printf(m, "512KB"); - break; - default: - seq_printf(m, "error"); - break; - } - - seq_printf(m, "\n"); - - return 0; -} - -static void __init -pcore_setup_arch(void) -{ - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000/HZ; - - /* Lookup PCI host bridges */ - board_type = pcore_find_bridges(); - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_SDA2; -#endif - - printk(KERN_INFO "Force PowerCore "); - if (board_type == PCORE_TYPE_6750) - printk("6750\n"); - else - printk("680\n"); - printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n"); - _set_L2CR(L2CR_L2E | _get_L2CR()); - -} - -static void -pcore_restart(char *cmd) -{ - local_irq_disable(); - /* Hard reset */ - writeb(0x11, 0xfe000332); - while(1); -} - -static void -pcore_halt(void) -{ - local_irq_disable(); - /* Turn off user LEDs */ - writeb(0x00, 0xfe000300); - while (1); -} - -static void -pcore_power_off(void) -{ - pcore_halt(); -} - - -static void __init -pcore_init_IRQ(void) -{ - int i; - - for ( i = 0 ; i < 16 ; i++ ) - irq_desc[i].handler = &i8259_pic; - - i8259_init(0); -} - -/* - * Set BAT 3 to map 0xf0000000 to end of physical memory space. - */ -static __inline__ void -pcore_set_bat(void) -{ - mb(); - mtspr(SPRN_DBAT3U, 0xf0001ffe); - mtspr(SPRN_DBAT3L, 0xfe80002a); - mb(); - -} - -static unsigned long __init -pcore_find_end_of_memory(void) -{ - - return mpc10x_get_mem_size(MPC10X_MEM_MAP_B); -} - -static void __init -pcore_map_io(void) -{ - io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO); -} - -TODC_ALLOC(); - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - parse_bootinfo(find_bootinfo()); - - /* Cover I/O space with a BAT */ - /* yuck, better hope your ram size is a power of 2 -- paulus */ - pcore_set_bat(); - - isa_io_base = MPC10X_MAPB_ISA_IO_BASE; - isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE; - pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET; - - ppc_md.setup_arch = pcore_setup_arch; - ppc_md.show_cpuinfo = pcore_show_cpuinfo; - ppc_md.init_IRQ = pcore_init_IRQ; - ppc_md.get_irq = i8259_irq; - - ppc_md.find_end_of_memory = pcore_find_end_of_memory; - ppc_md.setup_io_mappings = pcore_map_io; - - ppc_md.restart = pcore_restart; - ppc_md.power_off = pcore_power_off; - ppc_md.halt = pcore_halt; - - TODC_INIT(TODC_TYPE_MK48T59, - PCORE_NVRAM_AS0, - PCORE_NVRAM_AS1, - PCORE_NVRAM_DATA, - 8); - - ppc_md.time_init = todc_time_init; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.calibrate_decr = todc_calibrate_decr; - - ppc_md.nvram_read_val = todc_m48txx_read_val; - ppc_md.nvram_write_val = todc_m48txx_write_val; - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - ppc_md.progress = gen550_progress; -#endif -#ifdef CONFIG_KGDB - ppc_md.kgdb_map_scc = gen550_kgdb_map_scc; -#endif -} diff --git a/arch/ppc/platforms/pcore.h b/arch/ppc/platforms/pcore.h deleted file mode 100644 index c6a26e7649..0000000000 --- a/arch/ppc/platforms/pcore.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * arch/ppc/platforms/pcore.h - * - * Definitions for Force PowerCore board support - * - * Author: Matt Porter - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PPC_PLATFORMS_PCORE_H -#define __PPC_PLATFORMS_PCORE_H - -#include - -#define PCORE_TYPE_6750 1 -#define PCORE_TYPE_680 2 - -#define PCORE_NVRAM_AS0 0x73 -#define PCORE_NVRAM_AS1 0x75 -#define PCORE_NVRAM_DATA 0x77 - -#define PCORE_DCCR_REG (MPC10X_MAPB_ISA_IO_BASE + 0x308) -#define PCORE_DCCR_L2_MASK 0xc0 -#define PCORE_DCCR_L2_0KB 0x00 -#define PCORE_DCCR_L2_256KB 0x40 -#define PCORE_DCCR_L2_512KB 0xc0 -#define PCORE_DCCR_L2_1MB 0x80 -#define PCORE_DCCR_L2_2MB 0x00 - -#define PCORE_WINBOND_IDE_INT 0x43 -#define PCORE_WINBOND_PCI_INT 0x44 -#define PCORE_WINBOND_PRI_EDG_LVL 0x4d0 -#define PCORE_WINBOND_SEC_EDG_LVL 0x4d1 - -#endif /* __PPC_PLATFORMS_PCORE_H */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index daa7ef9ebc..400a5d38a1 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -61,7 +61,6 @@ obj-$(CONFIG_MVME5100) += open_pic.o todc_time.o indirect_pci.o \ obj-$(CONFIG_MVME5100_IPMC761_PRESENT) += i8259.o obj-$(CONFIG_OCOTEA) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_PAL4) += cpc700_pic.o -obj-$(CONFIG_PCORE) += todc_time.o i8259.o pci_auto.o obj-$(CONFIG_POWERPMC250) += pci_auto.o obj-$(CONFIG_PPLUS) += hawk_common.o open_pic.o i8259.o \ indirect_pci.o todc_time.o pci_auto.o -- 2.39.5