From 5b5820d08b8cc90ba0148bf8d4a5a1f792e9e8ba Mon Sep 17 00:00:00 2001 From: Marian Balakowicz Date: Thu, 15 Nov 2007 22:40:21 +1100 Subject: [PATCH] [POWERPC] mpc5200: Add generic support for simple MPC5200 based boards This patch adds support for 'mpc5200-simple-platform' compatible boards which do not need a platform specific setup. Such boards are supported assuming the following: - GPIO pins are configured by the firmware, - CDM configuration (clocking) is setup correctly by firmware, - if the 'fsl,has-wdt' property is present in one of the gpt nodes, then it is safe to use such gpt to reset the board, - PCI is supported if enabled in the kernel configuration and if there is a PCI bus node defined in the device tree. Signed-off-by: Marian Balakowicz Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/lite5200.dts | 2 +- arch/powerpc/boot/dts/lite5200b.dts | 2 +- arch/powerpc/platforms/52xx/Kconfig | 27 ++++++- arch/powerpc/platforms/52xx/Makefile | 1 + arch/powerpc/platforms/52xx/mpc5200_simple.c | 85 ++++++++++++++++++++ 5 files changed, 112 insertions(+), 5 deletions(-) create mode 100644 arch/powerpc/platforms/52xx/mpc5200_simple.c diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 23eeeb1fc6..e1d6f44153 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -19,7 +19,7 @@ / { model = "fsl,lite5200"; // revision = "1.0"; - compatible = "fsl,lite5200","generic-mpc5200"; + compatible = "fsl,lite5200"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index f94e073de9..3e06f58a0a 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -19,7 +19,7 @@ / { model = "fsl,lite5200b"; // revision = "1.0"; - compatible = "fsl,lite5200b","generic-mpc5200"; + compatible = "fsl,lite5200b"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 2938d4927b..733a8063d4 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -19,6 +19,28 @@ config PPC_MPC5200_BUGFIX It is safe to say 'Y' here +config PPC_MPC5200_SIMPLE + bool "Generic support for simple MPC5200 based boards" + depends on PPC_MULTIPLATFORM && PPC32 + select PPC_MPC5200 + select DEFAULT_UIMAGE + select WANT_DEVICE_TREE + default n + help + This option enables support for a simple MPC52xx based boards which + do not need a custom platform specific setup. Such boards are + supported assuming the following: + + - GPIO pins are configured by the firmware, + - CDM configuration (clocking) is setup correctly by firmware, + - if the 'fsl,has-wdt' property is present in one of the + gpt nodes, then it is safe to use such gpt to reset the board, + - PCI is supported if enabled in the kernel configuration + and if there is a PCI bus node defined in the device tree. + + Boards that are compatible with this generic platform support + are: 'tqc,tqm5200', 'promess,motionpro', 'schindler,cm5200'. + config PPC_EFIKA bool "bPlan Efika 5k2. MPC5200B based computer" depends on PPC_MULTIPLATFORM && PPC32 @@ -31,8 +53,7 @@ config PPC_EFIKA config PPC_LITE5200 bool "Freescale Lite5200 Eval Board" depends on PPC_MULTIPLATFORM && PPC32 - select WANT_DEVICE_TREE select PPC_MPC5200 + select DEFAULT_UIMAGE + select WANT_DEVICE_TREE default n - - diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index 307dbc1780..fe1b81bb52 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -6,6 +6,7 @@ obj-y += mpc52xx_pic.o mpc52xx_common.o obj-$(CONFIG_PCI) += mpc52xx_pci.o endif +obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o obj-$(CONFIG_PPC_EFIKA) += efika.o obj-$(CONFIG_PPC_LITE5200) += lite5200.o diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c new file mode 100644 index 0000000000..754aa932f5 --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -0,0 +1,85 @@ +/* + * Support for 'mpc5200-simple-platform' compatible boards. + * + * Written by Marian Balakowicz + * Copyright (C) 2007 Semihalf + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Description: + * This code implements support for a simple MPC52xx based boards which + * do not need a custom platform specific setup. Such boards are + * supported assuming the following: + * + * - GPIO pins are configured by the firmware, + * - CDM configuration (clocking) is setup correctly by firmware, + * - if the 'fsl,has-wdt' property is present in one of the + * gpt nodes, then it is safe to use such gpt to reset the board, + * - PCI is supported if enabled in the kernel configuration + * and if there is a PCI bus node defined in the device tree. + * + * Boards that are compatible with this generic platform support + * are listed in a 'board' table. + */ + +#undef DEBUG +#include +#include +#include +#include + +/* + * Setup the architecture + */ +static void __init mpc5200_simple_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("mpc5200_simple_setup_arch()", 0); + + /* Some mpc5200 & mpc5200b related configuration */ + mpc5200_setup_xlb_arbiter(); + + /* Map wdt for mpc52xx_restart() */ + mpc52xx_map_wdt(); + + mpc52xx_setup_pci(); +} + +/* list of the supported boards */ +static char *board[] __initdata = { + "promess,motionpro", + "schindler,cm5200", + "tqc,tqm5200", + NULL +}; + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc5200_simple_probe(void) +{ + unsigned long node = of_get_flat_dt_root(); + int i = 0; + + while (board[i]) { + if (of_flat_dt_is_compatible(node, board[i])) + break; + i++; + } + + return (board[i] != NULL); +} + +define_machine(mpc5200_simple_platform) { + .name = "mpc5200-simple-platform", + .probe = mpc5200_simple_probe, + .setup_arch = mpc5200_simple_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = mpc52xx_restart, + .calibrate_decr = generic_calibrate_decr, +}; -- 2.39.5