From 572d3138eb0cf17a2bf36944cc1d2c753578862e Mon Sep 17 00:00:00 2001 From: Thiago Galesi Date: Sat, 29 Jul 2006 10:46:37 -0300 Subject: [PATCH] USB: pl2303: reduce number of prototypes Reduce number of needed prototypes in Prolific pl2303 driver Signed-off-by: Thiago Galesi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 574 +++++++++++++++++------------------- 1 file changed, 271 insertions(+), 303 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 0cd42bf4c6..e2d8f9b94e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -127,65 +127,6 @@ static struct usb_driver pl2303_driver = { #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 -/* function prototypes for a PL2303 serial converter */ -static int pl2303_open (struct usb_serial_port *port, struct file *filp); -static void pl2303_close (struct usb_serial_port *port, struct file *filp); -static void pl2303_set_termios (struct usb_serial_port *port, - struct termios *old); -static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg); -static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs); -static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs); -static int pl2303_write (struct usb_serial_port *port, - const unsigned char *buf, int count); -static void pl2303_send (struct usb_serial_port *port); -static int pl2303_write_room(struct usb_serial_port *port); -static int pl2303_chars_in_buffer(struct usb_serial_port *port); -static void pl2303_break_ctl(struct usb_serial_port *port,int break_state); -static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file); -static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, - unsigned int set, unsigned int clear); -static int pl2303_startup (struct usb_serial *serial); -static void pl2303_shutdown (struct usb_serial *serial); -static struct pl2303_buf *pl2303_buf_alloc(unsigned int size); -static void pl2303_buf_free(struct pl2303_buf *pb); -static void pl2303_buf_clear(struct pl2303_buf *pb); -static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb); -static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb); -static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, - unsigned int count); -static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, - unsigned int count); - - -/* All of the device info needed for the PL2303 SIO serial converter */ -static struct usb_serial_driver pl2303_device = { - .driver = { - .owner = THIS_MODULE, - .name = "pl2303", - }, - .id_table = id_table, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .open = pl2303_open, - .close = pl2303_close, - .write = pl2303_write, - .ioctl = pl2303_ioctl, - .break_ctl = pl2303_break_ctl, - .set_termios = pl2303_set_termios, - .tiocmget = pl2303_tiocmget, - .tiocmset = pl2303_tiocmset, - .read_bulk_callback = pl2303_read_bulk_callback, - .read_int_callback = pl2303_read_int_callback, - .write_bulk_callback = pl2303_write_bulk_callback, - .write_room = pl2303_write_room, - .chars_in_buffer = pl2303_chars_in_buffer, - .attach = pl2303_startup, - .shutdown = pl2303_shutdown, -}; enum pl2303_type { type_0, /* don't know the difference between type 0 and */ @@ -204,6 +145,164 @@ struct pl2303_private { enum pl2303_type type; }; +/* + * pl2303_buf_alloc + * + * Allocate a circular buffer and all associated memory. + */ +static struct pl2303_buf *pl2303_buf_alloc(unsigned int size) +{ + struct pl2303_buf *pb; + + if (size == 0) + return NULL; + + pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL); + if (pb == NULL) + return NULL; + + pb->buf_buf = kmalloc(size, GFP_KERNEL); + if (pb->buf_buf == NULL) { + kfree(pb); + return NULL; + } + + pb->buf_size = size; + pb->buf_get = pb->buf_put = pb->buf_buf; + + return pb; +} + +/* + * pl2303_buf_free + * + * Free the buffer and all associated memory. + */ +static void pl2303_buf_free(struct pl2303_buf *pb) +{ + if (pb) { + kfree(pb->buf_buf); + kfree(pb); + } +} + +/* + * pl2303_buf_clear + * + * Clear out all data in the circular buffer. + */ +static void pl2303_buf_clear(struct pl2303_buf *pb) +{ + if (pb != NULL) + pb->buf_get = pb->buf_put; + /* equivalent to a get of all data available */ +} + +/* + * pl2303_buf_data_avail + * + * Return the number of bytes of data available in the circular + * buffer. + */ +static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb) +{ + if (pb == NULL) + return 0; + + return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); +} + +/* + * pl2303_buf_space_avail + * + * Return the number of bytes of space available in the circular + * buffer. + */ +static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb) +{ + if (pb == NULL) + return 0; + + return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); +} + +/* + * pl2303_buf_put + * + * Copy data data from a user buffer and put it into the circular buffer. + * Restrict to the amount of space available. + * + * Return the number of bytes copied. + */ +static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, + unsigned int count) +{ + unsigned int len; + + if (pb == NULL) + return 0; + + len = pl2303_buf_space_avail(pb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = pb->buf_buf + pb->buf_size - pb->buf_put; + if (count > len) { + memcpy(pb->buf_put, buf, len); + memcpy(pb->buf_buf, buf+len, count - len); + pb->buf_put = pb->buf_buf + count - len; + } else { + memcpy(pb->buf_put, buf, count); + if (count < len) + pb->buf_put += count; + else /* count == len */ + pb->buf_put = pb->buf_buf; + } + + return count; +} + +/* + * pl2303_buf_get + * + * Get data from the circular buffer and copy to the given buffer. + * Restrict to the amount of data available. + * + * Return the number of bytes copied. + */ +static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, + unsigned int count) +{ + unsigned int len; + + if (pb == NULL) + return 0; + + len = pl2303_buf_data_avail(pb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = pb->buf_buf + pb->buf_size - pb->buf_get; + if (count > len) { + memcpy(buf, pb->buf_get, len); + memcpy(buf+len, pb->buf_buf, count - len); + pb->buf_get = pb->buf_buf + count - len; + } else { + memcpy(buf, pb->buf_get, count); + if (count < len) + pb->buf_get += count; + else /* count == len */ + pb->buf_get = pb->buf_buf; + } + + return count; +} static int pl2303_startup(struct usb_serial *serial) { @@ -258,26 +357,6 @@ static int set_control_lines(struct usb_device *dev, u8 value) return retval; } -static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf, - int count) -{ - struct pl2303_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - - dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); - - if (!count) - return count; - - spin_lock_irqsave(&priv->lock, flags); - count = pl2303_buf_put(priv->buf, buf, count); - spin_unlock_irqrestore(&priv->lock, flags); - - pl2303_send(port); - - return count; -} - static void pl2303_send(struct usb_serial_port *port) { int count, result; @@ -321,6 +400,26 @@ static void pl2303_send(struct usb_serial_port *port) usb_serial_port_softint(port); } +static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf, + int count) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); + + if (!count) + return count; + + spin_lock_irqsave(&priv->lock, flags); + count = pl2303_buf_put(priv->buf, buf, count); + spin_unlock_irqrestore(&priv->lock, flags); + + pl2303_send(port); + + return count; +} + static int pl2303_write_room(struct usb_serial_port *port) { struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -516,8 +615,72 @@ static void pl2303_set_termios(struct usb_serial_port *port, 0x0, index, NULL, 0, 100); dbg("0x40:0x1:0x0:0x%x %d", index, i); } - - kfree(buf); + + kfree(buf); +} + +static void pl2303_close(struct usb_serial_port *port, struct file *filp) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int c_cflag; + int bps; + long timeout; + wait_queue_t wait; + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* wait for data to drain from the buffer */ + spin_lock_irqsave(&priv->lock, flags); + timeout = PL2303_CLOSING_WAIT; + init_waitqueue_entry(&wait, current); + add_wait_queue(&port->tty->write_wait, &wait); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + if (pl2303_buf_data_avail(priv->buf) == 0 || + timeout == 0 || signal_pending(current) || + !usb_get_intfdata(port->serial->interface)) /* disconnect */ + break; + spin_unlock_irqrestore(&priv->lock, flags); + timeout = schedule_timeout(timeout); + spin_lock_irqsave(&priv->lock, flags); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->tty->write_wait, &wait); + /* clear out any remaining data in the buffer */ + pl2303_buf_clear(priv->buf); + spin_unlock_irqrestore(&priv->lock, flags); + + /* wait for characters to drain from the device */ + /* (this is long enough for the entire 256 byte */ + /* pl2303 hardware buffer to drain with no flow */ + /* control for data rates of 1200 bps or more, */ + /* for lower rates we should really know how much */ + /* data is in the buffer to compute a delay */ + /* that is not unnecessarily long) */ + bps = tty_get_baud_rate(port->tty); + if (bps > 1200) + timeout = max((HZ*2560)/bps,HZ/10); + else + timeout = 2*HZ; + schedule_timeout_interruptible(timeout); + + /* shutdown our urbs */ + dbg("%s - shutting down urbs", __FUNCTION__); + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + usb_kill_urb(port->interrupt_in_urb); + + if (port->tty) { + c_cflag = port->tty->termios->c_cflag; + if (c_cflag & HUPCL) { + /* drop DTR and RTS */ + spin_lock_irqsave(&priv->lock, flags); + priv->line_control = 0; + spin_unlock_irqrestore(&priv->lock, flags); + set_control_lines(port->serial->dev, 0); + } + } } static int pl2303_open(struct usb_serial_port *port, struct file *filp) @@ -601,70 +764,6 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp) return 0; } -static void pl2303_close(struct usb_serial_port *port, struct file *filp) -{ - struct pl2303_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; - - dbg("%s - port %d", __FUNCTION__, port->number); - - /* wait for data to drain from the buffer */ - spin_lock_irqsave(&priv->lock, flags); - timeout = PL2303_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&port->tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (pl2303_buf_data_avail(priv->buf) == 0 || - timeout == 0 || signal_pending(current) || - !usb_get_intfdata(port->serial->interface)) /* disconnect */ - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->tty->write_wait, &wait); - /* clear out any remaining data in the buffer */ - pl2303_buf_clear(priv->buf); - spin_unlock_irqrestore(&priv->lock, flags); - - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - bps = tty_get_baud_rate(port->tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps,HZ/10); - else - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - - /* shutdown our urbs */ - dbg("%s - shutting down urbs", __FUNCTION__); - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - - if (port->tty) { - c_cflag = port->tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, 0); - } - } -} - static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear) { @@ -1003,164 +1102,33 @@ static void pl2303_write_bulk_callback(struct urb *urb, struct pt_regs *regs) pl2303_send(port); } -/* - * pl2303_buf_alloc - * - * Allocate a circular buffer and all associated memory. - */ -static struct pl2303_buf *pl2303_buf_alloc(unsigned int size) -{ - struct pl2303_buf *pb; - - if (size == 0) - return NULL; - - pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL); - if (pb == NULL) - return NULL; - - pb->buf_buf = kmalloc(size, GFP_KERNEL); - if (pb->buf_buf == NULL) { - kfree(pb); - return NULL; - } - - pb->buf_size = size; - pb->buf_get = pb->buf_put = pb->buf_buf; - - return pb; -} - -/* - * pl2303_buf_free - * - * Free the buffer and all associated memory. - */ -static void pl2303_buf_free(struct pl2303_buf *pb) -{ - if (pb) { - kfree(pb->buf_buf); - kfree(pb); - } -} - -/* - * pl2303_buf_clear - * - * Clear out all data in the circular buffer. - */ -static void pl2303_buf_clear(struct pl2303_buf *pb) -{ - if (pb != NULL) - pb->buf_get = pb->buf_put; - /* equivalent to a get of all data available */ -} - -/* - * pl2303_buf_data_avail - * - * Return the number of bytes of data available in the circular - * buffer. - */ -static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb) -{ - if (pb == NULL) - return 0; - - return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); -} - -/* - * pl2303_buf_space_avail - * - * Return the number of bytes of space available in the circular - * buffer. - */ -static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb) -{ - if (pb == NULL) - return 0; - - return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); -} - -/* - * pl2303_buf_put - * - * Copy data data from a user buffer and put it into the circular buffer. - * Restrict to the amount of space available. - * - * Return the number of bytes copied. - */ -static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, - unsigned int count) -{ - unsigned int len; - - if (pb == NULL) - return 0; - - len = pl2303_buf_space_avail(pb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = pb->buf_buf + pb->buf_size - pb->buf_put; - if (count > len) { - memcpy(pb->buf_put, buf, len); - memcpy(pb->buf_buf, buf+len, count - len); - pb->buf_put = pb->buf_buf + count - len; - } else { - memcpy(pb->buf_put, buf, count); - if (count < len) - pb->buf_put += count; - else /* count == len */ - pb->buf_put = pb->buf_buf; - } - - return count; -} - -/* - * pl2303_buf_get - * - * Get data from the circular buffer and copy to the given buffer. - * Restrict to the amount of data available. - * - * Return the number of bytes copied. - */ -static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, - unsigned int count) -{ - unsigned int len; - - if (pb == NULL) - return 0; - - len = pl2303_buf_data_avail(pb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = pb->buf_buf + pb->buf_size - pb->buf_get; - if (count > len) { - memcpy(buf, pb->buf_get, len); - memcpy(buf+len, pb->buf_buf, count - len); - pb->buf_get = pb->buf_buf + count - len; - } else { - memcpy(buf, pb->buf_get, count); - if (count < len) - pb->buf_get += count; - else /* count == len */ - pb->buf_get = pb->buf_buf; - } - - return count; -} +/* All of the device info needed for the PL2303 SIO serial converter */ +static struct usb_serial_driver pl2303_device = { + .driver = { + .owner = THIS_MODULE, + .name = "pl2303", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = pl2303_open, + .close = pl2303_close, + .write = pl2303_write, + .ioctl = pl2303_ioctl, + .break_ctl = pl2303_break_ctl, + .set_termios = pl2303_set_termios, + .tiocmget = pl2303_tiocmget, + .tiocmset = pl2303_tiocmset, + .read_bulk_callback = pl2303_read_bulk_callback, + .read_int_callback = pl2303_read_int_callback, + .write_bulk_callback = pl2303_write_bulk_callback, + .write_room = pl2303_write_room, + .chars_in_buffer = pl2303_chars_in_buffer, + .attach = pl2303_startup, + .shutdown = pl2303_shutdown, +}; static int __init pl2303_init(void) { -- 2.39.5