From 55a8e2c83ce50548dfef74bb19dfe2b809cb3099 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Nov 2006 18:08:10 +0900 Subject: [PATCH] [PATCH] libata: implement presence detection via polling IDENTIFY On some controllers (ICHs in piix mode), there is *NO* reliable way to determine device presence other than issuing IDENTIFY and see how the transaction proceeds by watching the TF status register. libata acted this way before irq-pio and phantom devices caused very little problem but now that IDENTIFY is performed using IRQ drive PIO, such phantom devices now result in multiple 30sec timeouts during boot. This patch implements ATA_FLAG_DETECT_POLLING. If a LLD sets this flag, libata core issues the initial IDENTIFY in polling mode and if the initial data transfer fails w/ HSM violation, the port is considered to be empty thus replicating the old libata and IDE behavior. Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 19 +++++++++++++++++-- drivers/ata/libata-eh.c | 23 ++++++++++++++++++----- drivers/ata/libata.h | 2 ++ include/linux/libata.h | 3 +++ 4 files changed, 40 insertions(+), 7 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 090abe4438..21f8d61e58 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1272,9 +1272,20 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, tf.protocol = ATA_PROT_PIO; + /* presence detection using polling IDENTIFY? */ + if (flags & ATA_READID_DETECT) + tf.flags |= ATA_TFLAG_POLLING; + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, id, sizeof(id[0]) * ATA_ID_WORDS); if (err_mask) { + if ((flags & ATA_READID_DETECT) && + (err_mask & AC_ERR_NODEV_HINT)) { + DPRINTK("ata%u.%d: NODEV after polling detection\n", + ap->id, dev->devno); + return -ENOENT; + } + rc = -EIO; reason = "I/O error"; goto err_out; @@ -4285,8 +4296,12 @@ fsm_start: /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; + /* HSM violation. Let EH handle this. + * Phantom devices also trigger this + * condition. Mark hint. + */ + qc->err_mask |= AC_ERR_HSM | + AC_ERR_NODEV_HINT; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 755fc68b53..e69f3df2ea 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1667,12 +1667,23 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, ata_class_enabled(ehc->classes[dev->devno])) { dev->class = ehc->classes[dev->devno]; + if (ap->flags & ATA_FLAG_DETECT_POLLING) + readid_flags |= ATA_READID_DETECT; + rc = ata_dev_read_id(dev, &dev->class, readid_flags, dev->id); if (rc == 0) { ehc->i.flags |= ATA_EHI_PRINTINFO; rc = ata_dev_configure(dev); ehc->i.flags &= ~ATA_EHI_PRINTINFO; + } else if (rc == -ENOENT) { + /* IDENTIFY was issued to non-existent + * device. No need to reset. Just + * thaw and kill the device. + */ + ata_eh_thaw_port(ap); + dev->class = ATA_DEV_UNKNOWN; + rc = 0; } if (rc) { @@ -1680,12 +1691,14 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, break; } - spin_lock_irqsave(ap->lock, flags); - ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; - spin_unlock_irqrestore(ap->lock, flags); + if (ata_dev_enabled(dev)) { + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; + spin_unlock_irqrestore(ap->lock, flags); - /* new device discovered, configure transfer mode */ - ehc->i.flags |= ATA_EHI_SETMODE; + /* new device discovered, configure xfermode */ + ehc->i.flags |= ATA_EHI_SETMODE; + } } } diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index bb98390aa0..be2ac39f01 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -42,6 +42,8 @@ struct ata_scsi_args { enum { /* flags for ata_dev_read_id() */ ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */ + ATA_READID_DETECT = (1 << 1), /* perform presence detection + * using polling IDENTIFY */ }; extern struct workqueue_struct *ata_aux_wq; diff --git a/include/linux/libata.h b/include/linux/libata.h index 36e233cc38..9080789913 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -176,6 +176,8 @@ enum { ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H * Register FIS clearing BSY */ ATA_FLAG_DEBUGMSG = (1 << 13), + ATA_FLAG_DETECT_POLLING = (1 << 14), /* detect device presence by + * polling IDENTIFY */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be @@ -335,6 +337,7 @@ enum ata_completion_errors { AC_ERR_SYSTEM = (1 << 6), /* system error */ AC_ERR_INVALID = (1 << 7), /* invalid argument */ AC_ERR_OTHER = (1 << 8), /* unknown */ + AC_ERR_NODEV_HINT = (1 << 9), /* polling device detection hint */ }; /* forward declarations */ -- 2.39.5