From 53f01bba49938f115237fe43a261c31ac13ae5c6 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:36:40 -0400 Subject: [PATCH] [PARISC] Convert parisc_device to use struct resource for hpa Convert pa_dev->hpa from an unsigned long to a struct resource. Signed-off-by: Matthew Wilcox Fix up users of ->hpa to use ->hpa.start instead. Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- arch/parisc/kernel/perf.c | 12 +++++++----- arch/parisc/kernel/processor.c | 8 ++++---- drivers/input/keyboard/hilkbd.c | 4 ++-- drivers/input/serio/gscps2.c | 2 +- drivers/input/serio/hp_sdc.c | 6 +++--- drivers/net/lasi_82596.c | 7 ++++--- drivers/parisc/asp.c | 4 ++-- drivers/parisc/ccio-dma.c | 4 ++-- drivers/parisc/ccio-rm-dma.c | 2 +- drivers/parisc/dino.c | 6 +++--- drivers/parisc/eisa.c | 2 +- drivers/parisc/hppb.c | 8 ++++---- drivers/parisc/lasi.c | 2 +- drivers/parisc/lba_pci.c | 14 +++++++------- drivers/parisc/sba_iommu.c | 6 +++--- drivers/parisc/wax.c | 2 +- drivers/parport/parport_gsc.c | 5 +++-- drivers/scsi/lasi700.c | 2 +- drivers/scsi/zalon.c | 4 ++-- drivers/serial/8250_gsc.c | 5 +++-- drivers/serial/mux.c | 2 +- include/asm-parisc/parisc-device.h | 2 +- sound/parisc/harmony.c | 6 +++--- 23 files changed, 60 insertions(+), 55 deletions(-) diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index b3ad0a505b..44670d6e06 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -746,7 +746,8 @@ static int perf_write_image(uint64_t *memaddr) uint64_t *bptr; uint32_t dwords; uint32_t *intrigue_rdr; - uint64_t *intrigue_bitmask, tmp64, proc_hpa; + uint64_t *intrigue_bitmask, tmp64; + void __iomem *runway; struct rdr_tbl_ent *tentry; int i; @@ -798,15 +799,16 @@ static int perf_write_image(uint64_t *memaddr) return -1; } - proc_hpa = cpu_device->hpa; + runway = ioremap(cpu_device->hpa.start, 4096); /* Merge intrigue bits into Runway STATUS 0 */ - tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful; - __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS); + tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful; + __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), + runway + RUNWAY_STATUS); /* Write RUNWAY DEBUG registers */ for (i = 0; i < 8; i++) { - __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i); + __raw_writeq(*memaddr++, runway + RUNWAY_DEBUG); } return 0; diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 13b721cb9f..4f5bbcf1f5 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev) * May get overwritten by PAT code. */ cpuid = boot_cpu_data.cpu_count; - txn_addr = dev->hpa; /* for legacy PDC */ + txn_addr = dev->hpa.start; /* for legacy PDC */ #ifdef __LP64__ if (is_pdc_pat()) { @@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev) * boot time (ie shutdown a CPU from an OS perspective). */ /* get the cpu number */ - status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa); + status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start); BUG_ON(PDC_OK != status); @@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev) printk(KERN_WARNING "IGNORING CPU at 0x%x," " cpu_slot_id > NR_CPUS" " (%ld > %d)\n", - dev->hpa, cpu_info.cpu_num, NR_CPUS); + dev->hpa.start, cpu_info.cpu_num, NR_CPUS); /* Ignore CPU since it will only crash */ boot_cpu_data.cpu_count--; return 1; @@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev) p->loops_per_jiffy = loops_per_jiffy; p->dev = dev; /* Save IODC data in case we need it */ - p->hpa = dev->hpa; /* save CPU hpa */ + p->hpa = dev->hpa.start; /* save CPU hpa */ p->cpuid = cpuid; /* save CPU id */ p->txn_addr = txn_addr; /* save CPU IRQ address */ #ifdef CONFIG_SMP diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index 8aa81c9ac2..e7a1e14f8b 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -278,11 +278,11 @@ static int __init hil_init_chip(struct parisc_device *dev) { if (!dev->irq) { - printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa); + printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start); return -ENODEV; } - hil_base = dev->hpa; + hil_base = dev->hpa.start; hil_irq = dev->irq; hil_dev.dev_id = dev; diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 4bad281019..9790d7169a 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -331,7 +331,7 @@ static int __init gscps2_probe(struct parisc_device *dev) { struct gscps2port *ps2port; struct serio *serio; - unsigned long hpa = dev->hpa; + unsigned long hpa = dev->hpa.start; int ret; if (!dev->irq) diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 045b9a7a9d..a10348bb25 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -875,9 +875,9 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) hp_sdc.dev = d; hp_sdc.irq = d->irq; hp_sdc.nmi = d->aux_irq; - hp_sdc.base_io = d->hpa; - hp_sdc.data_io = d->hpa + 0x800; - hp_sdc.status_io = d->hpa + 0x801; + hp_sdc.base_io = d->hpa.start; + hp_sdc.data_io = d->hpa.start + 0x800; + hp_sdc.status_io = d->hpa.start + 0x801; return hp_sdc_init(); } diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index 180e526a20..a63d8a317d 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -1528,17 +1528,18 @@ lan_init_chip(struct parisc_device *dev) if (!dev->irq) { printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n", - __FILE__, dev->hpa); + __FILE__, dev->hpa.start); return -ENODEV; } - printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa, dev->irq); + printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start, + dev->irq); netdevice = alloc_etherdev(0); if (!netdevice) return -ENOMEM; - netdevice->base_addr = dev->hpa; + netdevice->base_addr = dev->hpa.start; netdevice->irq = dev->irq; retval = i82596_probe(netdevice, &dev->dev); diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c index 52f37b4243..558420bc9f 100644 --- a/drivers/parisc/asp.c +++ b/drivers/parisc/asp.c @@ -77,12 +77,12 @@ asp_init_chip(struct parisc_device *dev) struct gsc_irq gsc_irq; int ret; - asp.version = gsc_readb(dev->hpa + ASP_VER_OFFSET) & 0xf; + asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf; asp.name = (asp.version == 1) ? "Asp" : "Cutoff"; asp.hpa = ASP_INTERRUPT_ADDR; printk(KERN_INFO "%s version %d at 0x%lx found.\n", - asp.name, asp.version, dev->hpa); + asp.name, asp.version, dev->hpa.start); /* the IRQ ASP should use */ ret = -EBUSY; diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 2bb1889c4c..80d0927dc8 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1546,7 +1546,7 @@ static int ccio_probe(struct parisc_device *dev) ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn"; - printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa); + printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa.start); for (i = 0; i < ioc_count; i++) { ioc_p = &(*ioc_p)->next; @@ -1554,7 +1554,7 @@ static int ccio_probe(struct parisc_device *dev) *ioc_p = ioc; ioc->hw_path = dev->hw_path; - ioc->ioc_hpa = (struct ioa_registers *)dev->hpa; + ioc->ioc_regs = ioremap(dev->hpa.start, 4096); ccio_ioc_init(ioc); ccio_init_resources(ioc); hppa_dma_ops = &ccio_ops; diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c index 57e6385976..356b8357bc 100644 --- a/drivers/parisc/ccio-rm-dma.c +++ b/drivers/parisc/ccio-rm-dma.c @@ -167,7 +167,7 @@ ccio_probe(struct parisc_device *dev) { printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME, dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn", - dev->hpa); + dev->hpa.start); /* ** FIXME - should check U2 registers to verify it's really running diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 8c61705e67..37820b0ae5 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -902,15 +902,15 @@ void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp); ** If so, initialize the chip appropriately (card-mode vs bridge mode). ** Much of the initialization is common though. */ -static int __init -dino_driver_callback(struct parisc_device *dev) +static int __init dino_probe(struct parisc_device *dev) { struct dino_device *dino_dev; // Dino specific control struct const char *version = "unknown"; char *name; int is_cujo = 0; struct pci_bus *bus; - + unsigned long hpa = dev->hpa.start; + name = "Dino"; if (is_card_dino(&dev->id)) { version = "3.x (card mode)"; diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 0afeedddf5..6362bf99ef 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -315,7 +315,7 @@ static int __devinit eisa_probe(struct parisc_device *dev) char *name = is_mongoose(dev) ? "Mongoose" : "Wax"; printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", - name, dev->hpa); + name, dev->hpa.start); eisa_dev.hba.dev = dev; eisa_dev.hba.iommu = ccio_get_iommu(dev); diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c index a6eae3e7c0..5edf93f807 100644 --- a/drivers/parisc/hppb.c +++ b/drivers/parisc/hppb.c @@ -68,14 +68,14 @@ static int hppb_probe(struct parisc_device *dev) memset(card->next, '\0', sizeof(struct hppb_card)); card = card->next; } - printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa); + printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start); - card->hpa = dev->hpa; + card->hpa = dev->hpa.start; card->mmio_region.name = "HP-PB Bus"; card->mmio_region.flags = IORESOURCE_MEM; - card->mmio_region.start = __raw_readl(dev->hpa + IO_IO_LOW); - card->mmio_region.end = __raw_readl(dev->hpa + IO_IO_HIGH) - 1; + card->mmio_region.start = gsc_readl(dev->hpa.start + IO_IO_LOW); + card->mmio_region.end = gsc_readl(dev->hpa.start + IO_IO_HIGH) - 1; status = ccio_request_resource(dev, &card->mmio_region); if(status < 0) { diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c index c776c372ae..a8c20396ff 100644 --- a/drivers/parisc/lasi.c +++ b/drivers/parisc/lasi.c @@ -175,7 +175,7 @@ lasi_init_chip(struct parisc_device *dev) return -ENOMEM; lasi->name = "Lasi"; - lasi->hpa = dev->hpa; + lasi->hpa = dev->hpa.start; /* Check the 4-bit (yes, only 4) version register */ lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf; diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 7fdd80b7eb..5e495dcbc5 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1288,7 +1288,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) ** Adjust "window" for this rope. */ rsize /= ROPES_PER_IOC; - r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa); + r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start); r->end = r->start + rsize; } else { r->end = r->start = 0; /* Not enabled. */ @@ -1458,7 +1458,7 @@ lba_driver_probe(struct parisc_device *dev) u32 func_class; void *tmp_obj; char *version; - void __iomem *addr = ioremap(dev->hpa, 4096); + void __iomem *addr = ioremap(dev->hpa.start, 4096); /* Read HW Rev First */ func_class = READ_REG32(addr + LBA_FCLASS); @@ -1476,7 +1476,7 @@ lba_driver_probe(struct parisc_device *dev) } printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n", - MODULE_NAME, version, func_class & 0xf, dev->hpa); + MODULE_NAME, version, func_class & 0xf, dev->hpa.start); if (func_class < 2) { printk(KERN_WARNING "Can't support LBA older than " @@ -1503,17 +1503,17 @@ lba_driver_probe(struct parisc_device *dev) * but for the mask for func_class. */ printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n", - MODULE_NAME, version, func_class & 0xff, dev->hpa); + MODULE_NAME, version, func_class & 0xff, dev->hpa.start); cfg_ops = &mercury_cfg_ops; } else { - printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa); + printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa.start); return -ENODEV; } /* ** Tell I/O SAPIC driver we have a IRQ handler/region. */ - tmp_obj = iosapic_register(dev->hpa + LBA_IOSAPIC_BASE); + tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE); /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't ** have an IRT entry will get NULL back from iosapic code. @@ -1635,7 +1635,7 @@ void __init lba_init(void) */ void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask) { - void __iomem * base_addr = ioremap(lba->hpa, 4096); + void __iomem * base_addr = ioremap(lba->hpa.start, 4096); imask <<= 2; /* adjust for hints - 2 more bits */ diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index a8405f05fb..6256ad365d 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -1600,7 +1600,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset) { - return ioremap(sba_dev->dev->hpa + offset, SBA_FUNC_SIZE); + return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE); } static void sba_hw_init(struct sba_device *sba_dev) @@ -1978,7 +1978,7 @@ sba_driver_callback(struct parisc_device *dev) u32 func_class; int i; char *version; - void __iomem *sba_addr = ioremap(dev->hpa, SBA_FUNC_SIZE); + void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE); sba_dump_ranges(sba_addr); @@ -2020,7 +2020,7 @@ sba_driver_callback(struct parisc_device *dev) } printk(KERN_INFO "%s found %s at 0x%lx\n", - MODULE_NAME, version, dev->hpa); + MODULE_NAME, version, dev->hpa.start); sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL); if (!sba_dev) { diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c index e547d7d024..17dce2adf7 100644 --- a/drivers/parisc/wax.c +++ b/drivers/parisc/wax.c @@ -81,7 +81,7 @@ wax_init_chip(struct parisc_device *dev) return -ENOMEM; wax->name = "wax"; - wax->hpa = dev->hpa; + wax->hpa = dev->hpa.start; wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */ printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa); diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index 02d72acd1c..fde29a75f8 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -359,11 +359,12 @@ static int __devinit parport_init_chip(struct parisc_device *dev) unsigned long port; if (!dev->irq) { - printk("IRQ not found for parallel device at 0x%lx\n", dev->hpa); + printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n", + dev->hpa.start); return -ENODEV; } - port = dev->hpa + PARPORT_GSC_OFFSET; + port = dev->hpa.start + PARPORT_GSC_OFFSET; /* some older machines with ASP-chip don't support * the enhanced parport modes. diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 123f4933d8..8028418b3a 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -98,7 +98,7 @@ MODULE_DEVICE_TABLE(parisc, lasi700_ids); static int __init lasi700_probe(struct parisc_device *dev) { - unsigned long base = dev->hpa + LASI_SCSI_CORE_OFFSET; + unsigned long base = dev->hpa.start + LASI_SCSI_CORE_OFFSET; struct NCR_700_Host_Parameters *hostdata; struct Scsi_Host *host; diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index 5a51051e31..b131432c67 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -88,7 +88,7 @@ zalon_probe(struct parisc_device *dev) struct gsc_irq gsc_irq; u32 zalon_vers; int error = -ENODEV; - void __iomem *zalon = ioremap(dev->hpa, 4096); + void __iomem *zalon = ioremap(dev->hpa.start, 4096); void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET; static int unit = 0; struct Scsi_Host *host; @@ -127,7 +127,7 @@ zalon_probe(struct parisc_device *dev) device.chip = zalon720_chip; device.host_id = 7; device.dev = &dev->dev; - device.slot.base = dev->hpa + GSC_SCSI_ZALON_OFFSET; + device.slot.base = dev->hpa.start + GSC_SCSI_ZALON_OFFSET; device.slot.base_v = io_port; device.slot.irq = dev->irq; device.differential = 2; diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 431aa5761a..abc5a0cfe2 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -42,12 +42,13 @@ serial_init_chip(struct parisc_device *dev) */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) { printk(KERN_INFO "Serial: device 0x%lx not configured.\n" - "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa); + "Enable support for Wax, Lasi, Asp or Dino.\n", + dev->hpa.start); } return -ENODEV; } - address = dev->hpa; + address = dev->hpa.start; if (dev->id.sversion != 0x8d) { address += 0x800; } diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index a12005b08b..009ce83c8e 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -444,7 +444,7 @@ static int __init mux_probe(struct parisc_device *dev) unsigned long bytecnt; struct uart_port *port; - status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32); + status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); if(status != PDC_OK) { printk(KERN_ERR "Serial mux: Unable to read IODC.\n"); return 1; diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h index cbde8b41c8..1d247e32a6 100644 --- a/include/asm-parisc/parisc-device.h +++ b/include/asm-parisc/parisc-device.h @@ -1,7 +1,7 @@ #include struct parisc_device { - unsigned long hpa; /* Hard Physical Address */ + struct resource hpa; /* Hard Physical Address */ struct parisc_device_id id; struct parisc_driver *driver; /* Driver for this device */ char name[80]; /* The hardware description */ diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c index f560dd8cdb..8b3ea26469 100644 --- a/sound/parisc/harmony.c +++ b/sound/parisc/harmony.c @@ -852,14 +852,14 @@ snd_harmony_create(snd_card_t *card, memset(&h->pbuf, 0, sizeof(h->pbuf)); memset(&h->cbuf, 0, sizeof(h->cbuf)); - h->hpa = padev->hpa; + h->hpa = padev->hpa.start; h->card = card; h->dev = padev; h->irq = padev->irq; - h->iobase = ioremap_nocache(padev->hpa, HARMONY_SIZE); + h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE); if (h->iobase == NULL) { printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n", - padev->hpa); + padev->hpa.start); err = -EBUSY; goto free_and_ret; } -- 2.39.5