From 5399be7f4679251e8c4c6637fde240f7ac8efdb9 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 6 Jun 2008 13:50:06 +0200 Subject: [PATCH] powerpc/85xx: add local bus nodes for Flash and CAN to tqm8560.dts This patch adds local bus nodes for Flash and CAN to the DTS file of the TQM8560 module (tqm8560.dts). Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/tqm8560.dts | 65 +++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index 979058c2b5..6794882a02 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -2,6 +2,7 @@ * TQM 8560 Device Tree Source * * Copyright 2008 Freescale Semiconductor Inc. + * Copyright 2008 Wolfgang Grandegger * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -223,6 +224,70 @@ }; }; + localbus@e0005000 { + compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xe0005000 0x100>; // BRx, ORx, etc. + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 + 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 + 2 0x0 0xe3000000 0x00008000 // CAN (2 x i82527) + >; + + flash@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x8000000>; + bank-width = <4>; + device-width = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x07a00000>; + }; + partition@7f00000 { + label = "env1"; + reg = <0x07f00000 0x00040000>; + }; + partition@7f40000 { + label = "env2"; + reg = <0x07f40000 0x00040000>; + }; + partition@7f80000 { + label = "u-boot"; + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can0@2,0 { + compatible = "intel,82527"; // Bosch CC770 + reg = <2 0x0 0x100>; + interrupts = <4 0>; + interrupt-parent = <&mpic>; + }; + + can1@2,100 { + compatible = "intel,82527"; // Bosch CC770 + reg = <2 0x100 0x100>; + interrupts = <4 0>; + interrupt-parent = <&mpic>; + }; + }; + pci0: pci@e0008000 { cell-index = <0>; #interrupt-cells = <1>; -- 2.39.5