From 4b3afca9345f5beb9c607faeb2aef4f91dd91a13 Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Fri, 25 Aug 2006 16:43:25 +0800 Subject: [PATCH] [POWERPC] Add mpc7448hpc2 device tree source file This patch adds the mpc7448hpc2 device tree source file. Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc7448hpc2.dts | 190 ++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc7448hpc2.dts diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts new file mode 100644 index 0000000000..d7b985e6bd --- /dev/null +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -0,0 +1,190 @@ +/* + * MPC7448HPC2 (Taiga) board Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * 2006 Roy Zang . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "mpc7448hpc2"; + compatible = "mpc74xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells =<0>; + linux,phandle = <200>; + + PowerPC,7448@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K bytes + i-cache-size = <8000>; // L1, 32K bytes + timebase-frequency = <0>; // 33 MHz, from uboot + clock-frequency = <0>; // From U-Boot + bus-frequency = <0>; // From U-Boot + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 20000000 // DDR2 512M at 0 + >; + }; + + tsi108@c0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "tsi-bridge"; + ranges = <00000000 c0000000 00010000>; + reg = ; + bus-frequency = <0>; + + i2c@7000 { + interrupt-parent = <7400>; + interrupts = ; + reg = <7000 400>; + device_type = "i2c"; + compatible = "tsi-i2c"; + }; + + mdio@6000 { + device_type = "mdio"; + compatible = "tsi-ethernet"; + + ethernet-phy@6000 { + linux,phandle = <6000>; + interrupt-parent = <7400>; + interrupts = <2 1>; + reg = <6000 50>; + phy-id = <8>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@6400 { + linux,phandle = <6400>; + interrupt-parent = <7400>; + interrupts = <2 1>; + reg = <6000 50>; + phy-id = <9>; + device_type = "ethernet-phy"; + }; + + }; + + ethernet@6200 { + #size-cells = <0>; + device_type = "network"; + model = "TSI-ETH"; + compatible = "tsi-ethernet"; + reg = <6000 200>; + address = [ 00 06 D2 00 00 01 ]; + interrupts = <10 2>; + interrupt-parent = <7400>; + phy-handle = <6000>; + }; + + ethernet@6600 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSI-ETH"; + compatible = "tsi-ethernet"; + reg = <6400 200>; + address = [ 00 06 D2 00 00 02 ]; + interrupts = <11 2>; + interrupt-parent = <7400>; + phy-handle = <6400>; + }; + + serial@7808 { + device_type = "serial"; + compatible = "ns16550"; + reg = <7808 200>; + clock-frequency = <3f6b5a00>; + interrupts = ; + interrupt-parent = <7400>; + }; + + serial@7c08 { + device_type = "serial"; + compatible = "ns16550"; + reg = <7c08 200>; + clock-frequency = <3f6b5a00>; + interrupts = ; + interrupt-parent = <7400>; + }; + + pic@7400 { + linux,phandle = <7400>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <7400 400>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + pci@1000 { + compatible = "tsi10x"; + device_type = "pci"; + linux,phandle = <1000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <1000 1000>; + bus-range = <0 0>; + ranges = <02000000 0 e0000000 e0000000 0 1A000000 + 01000000 0 00000000 fa000000 0 00010000>; + clock-frequency = <7f28154>; + interrupt-parent = <7400>; + interrupts = <17 2>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 0800 0 0 1 7400 24 0 + 0800 0 0 2 7400 25 0 + 0800 0 0 3 7400 26 0 + 0800 0 0 4 7400 27 0 + + /* IDSEL 0x12 */ + 1000 0 0 1 7400 25 0 + 1000 0 0 2 7400 26 0 + 1000 0 0 3 7400 27 0 + 1000 0 0 4 7400 24 0 + + /* IDSEL 0x13 */ + 1800 0 0 1 7400 26 0 + 1800 0 0 2 7400 27 0 + 1800 0 0 3 7400 24 0 + 1800 0 0 4 7400 25 0 + + /* IDSEL 0x14 */ + 2000 0 0 1 7400 27 0 + 2000 0 0 2 7400 24 0 + 2000 0 0 3 7400 25 0 + 2000 0 0 4 7400 26 0 + >; + }; + }; + +}; -- 2.39.5