From 4a5d30302ec82c53613915d5eb8381b8efe1dd0e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 1 May 2007 23:26:30 +0200 Subject: [PATCH] i2c-elektor: Port to the new device driver model Port the i2c-elektor driver to the new device driver model. I'm using Rene Herman's new isa bus type, as it fits the needs nicely. One benefit is that we can now give a proper parent to our i2c adapter. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-elektor.c | 51 ++++++++++++++++++++++++-------- 1 file changed, 39 insertions(+), 12 deletions(-) diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 8349674648..804f0a551c 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -35,6 +35,7 @@ #include #include +#include #include #include @@ -207,7 +208,7 @@ static struct i2c_adapter pcf_isa_ops = { .name = "i2c-elektor", }; -static int __init i2c_pcfisa_init(void) +static int __devinit elektor_match(struct device *dev, unsigned int id) { #ifdef __alpha__ /* check to see we have memory mapped PCF8584 connected to the @@ -222,9 +223,8 @@ static int __init i2c_pcfisa_init(void) /* yeap, we've found cypress, let's check config */ if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { - pr_debug("%s: found cy82c693, config " - "register 0x47 = 0x%02x\n", - pcf_isa_ops.name, config); + dev_dbg(dev, "found cy82c693, config " + "register 0x47 = 0x%02x\n", config); /* UP2000 board has this register set to 0xe1, but the most significant bit as seems can be @@ -244,9 +244,9 @@ static int __init i2c_pcfisa_init(void) 8.25 MHz (PCI/4) clock (this can be read from cypress) */ clock = I2C_PCF_CLK | I2C_PCF_TRNS90; - pr_info("%s: found API UP2000 like " - "board, will probe PCF8584 " - "later\n", pcf_isa_ops.name); + dev_info(dev, "found API UP2000 like " + "board, will probe PCF8584 " + "later\n"); } } pci_dev_put(cy693_dev); @@ -256,22 +256,27 @@ static int __init i2c_pcfisa_init(void) /* sanity checks for mmapped I/O */ if (mmapped && base < 0xc8000) { - printk(KERN_ERR "%s: incorrect base address (%#x) specified " - "for mmapped I/O\n", pcf_isa_ops.name, base); - return -ENODEV; + dev_err(dev, "incorrect base address (%#x) specified " + "for mmapped I/O\n", base); + return 0; } if (base == 0) { base = DEFAULT_BASE; } + return 1; +} +static int __devinit elektor_probe(struct device *dev, unsigned int id) +{ init_waitqueue_head(&pcf_wait); if (pcf_isa_init()) return -ENODEV; + pcf_isa_ops.dev.parent = dev; if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) goto fail; - dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base); + dev_info(dev, "found device at %#x\n", base); return 0; @@ -291,7 +296,7 @@ static int __init i2c_pcfisa_init(void) return -ENODEV; } -static void i2c_pcfisa_exit(void) +static int __devexit elektor_remove(struct device *dev, unsigned int id) { i2c_del_adapter(&pcf_isa_ops); @@ -307,6 +312,28 @@ static void i2c_pcfisa_exit(void) iounmap(base_iomem); release_mem_region(base, 2); } + + return 0; +} + +static struct isa_driver i2c_elektor_driver = { + .match = elektor_match, + .probe = elektor_probe, + .remove = __devexit_p(elektor_remove), + .driver = { + .owner = THIS_MODULE, + .name = "i2c-elektor", + }, +}; + +static int __init i2c_pcfisa_init(void) +{ + return isa_register_driver(&i2c_elektor_driver, 1); +} + +static void __exit i2c_pcfisa_exit(void) +{ + isa_unregister_driver(&i2c_elektor_driver); } MODULE_AUTHOR("Hans Berglund "); -- 2.39.5