From 493adb1fee89eaad4f6cb1018ef4c48fccd79ab5 Mon Sep 17 00:00:00 2001 From: Wendy Xiong Date: Mon, 23 Jun 2008 20:36:22 -0700 Subject: [PATCH] bnx2x: Add PCIE EEH support Add PCI recovery functions to the driver. The initial PCI state is also saved so the MSI state can be restored during PCI recovery. Signed-off-by: Wendy Xiong Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 101 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 95 insertions(+), 6 deletions(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index e9037131a0..d21dc89d1e 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -10181,13 +10181,102 @@ static int bnx2x_resume(struct pci_dev *pdev) return rc; } +/** + * bnx2x_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + rtnl_lock(); + + netif_device_detach(dev); + + if (netif_running(dev)) + bnx2x_nic_unload(bp, UNLOAD_CLOSE); + + pci_disable_device(pdev); + + rtnl_unlock(); + + /* Request a slot reset */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * bnx2x_io_slot_reset - called after the PCI bus has been reset + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + rtnl_lock(); + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset\n"); + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + pci_restore_state(pdev); + + if (netif_running(dev)) + bnx2x_set_power_state(bp, PCI_D0); + + rtnl_unlock(); + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * bnx2x_io_resume - called when traffic can start flowing again + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void bnx2x_io_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + rtnl_lock(); + + if (netif_running(dev)) + bnx2x_nic_load(bp, LOAD_OPEN); + + netif_device_attach(dev); + + rtnl_unlock(); +} + +static struct pci_error_handlers bnx2x_err_handler = { + .error_detected = bnx2x_io_error_detected, + .slot_reset = bnx2x_io_slot_reset, + .resume = bnx2x_io_resume, +}; + static struct pci_driver bnx2x_pci_driver = { - .name = DRV_MODULE_NAME, - .id_table = bnx2x_pci_tbl, - .probe = bnx2x_init_one, - .remove = __devexit_p(bnx2x_remove_one), - .suspend = bnx2x_suspend, - .resume = bnx2x_resume, + .name = DRV_MODULE_NAME, + .id_table = bnx2x_pci_tbl, + .probe = bnx2x_init_one, + .remove = __devexit_p(bnx2x_remove_one), + .suspend = bnx2x_suspend, + .resume = bnx2x_resume, + .err_handler = &bnx2x_err_handler, }; static int __init bnx2x_init(void) -- 2.39.5