From 44bafdf37b30234671d4e2fb595dea4c3717d089 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 10 Feb 2007 01:45:08 -0800 Subject: [PATCH] [PATCH] Char: serial167, cleanup serial167, cleanup - Lindent the code - remove 3 pointers from paranoia_check Signed-off-by: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/serial167.c | 3322 +++++++++++++++++++------------------- 1 file changed, 1645 insertions(+), 1677 deletions(-) diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index af50d32ae2..5fd314adc1 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -111,12 +111,13 @@ u_char initial_console_speed; /* This is the per-port data structure */ struct cyclades_port cy_port[] = { - /* CARD# */ - {-1 }, /* ttyS0 */ - {-1 }, /* ttyS1 */ - {-1 }, /* ttyS2 */ - {-1 }, /* ttyS3 */ + /* CARD# */ + {-1}, /* ttyS0 */ + {-1}, /* ttyS1 */ + {-1}, /* ttyS2 */ + {-1}, /* ttyS3 */ }; + #define NR_PORTS ARRAY_SIZE(cy_port) /* @@ -128,42 +129,46 @@ struct cyclades_port cy_port[] = { * HI VHI */ static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, - 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800,115200,150000, - 0}; + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, + 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, + 0 +}; #if 0 -static char baud_co[] = { /* 25 MHz clock option table */ - /* value => 00 01 02 03 04 */ - /* divide by 8 32 128 512 2048 */ - 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, - 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; +static char baud_co[] = { /* 25 MHz clock option table */ + /* value => 00 01 02 03 04 */ + /* divide by 8 32 128 512 2048 */ + 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, + 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; -static char baud_bpr[] = { /* 25 MHz baud rate period table */ - 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, - 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15}; +static char baud_bpr[] = { /* 25 MHz baud rate period table */ + 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, + 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 +}; #endif /* I think 166 brd clocks 2401 at 20MHz.... */ /* These values are written directly to tcor, and >> 5 for writing to rcor */ -static u_char baud_co[] = { /* 20 MHz clock option table */ - 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x60, 0x60, 0x40, - 0x40, 0x40, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; +static u_char baud_co[] = { /* 20 MHz clock option table */ + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x60, 0x60, 0x40, + 0x40, 0x40, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; /* These values written directly to tbpr/rbpr */ -static u_char baud_bpr[] = { /* 20 MHz baud rate period table */ - 0x00, 0xc0, 0x80, 0x58, 0x6c, 0x40, 0xc0, 0x81, 0x40, 0x81, - 0x57, 0x40, 0x81, 0x40, 0x81, 0x40, 0x2b, 0x20, 0x15, 0x10}; - -static u_char baud_cor4[] = { /* receive threshold */ - 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, - 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07}; - +static u_char baud_bpr[] = { /* 20 MHz baud rate period table */ + 0x00, 0xc0, 0x80, 0x58, 0x6c, 0x40, 0xc0, 0x81, 0x40, 0x81, + 0x57, 0x40, 0x81, 0x40, 0x81, 0x40, 0x2b, 0x20, 0x15, 0x10 +}; +static u_char baud_cor4[] = { /* receive threshold */ + 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, + 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07 +}; static void shutdown(struct cyclades_port *); -static int startup (struct cyclades_port *); +static int startup(struct cyclades_port *); static void cy_throttle(struct tty_struct *); static void cy_unthrottle(struct tty_struct *); static void config_setup(struct cyclades_port *); @@ -174,16 +179,16 @@ static void show_status(int); #ifdef CONFIG_REMOTE_DEBUG static void debug_setup(void); -void queueDebugChar (int c); +void queueDebugChar(int c); int getDebugChar(void); #define DEBUG_PORT 1 #define DEBUG_LEN 256 typedef struct { - int in; - int out; - unsigned char buf[DEBUG_LEN]; + int in; + int out; + unsigned char buf[DEBUG_LEN]; } debugq; debugq debugiq; @@ -196,7 +201,7 @@ debugq debugiq; * delay, but this wild guess will do for now. */ -void my_udelay (long us) +void my_udelay(long us) { u_char x; volatile u_char *p = &x; @@ -207,62 +212,73 @@ void my_udelay (long us) x |= *p; } -static inline int -serial_paranoia_check(struct cyclades_port *info, char *name, - const char *routine) +static inline int serial_paranoia_check(struct cyclades_port *info, char *name, + const char *routine) { #ifdef SERIAL_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for serial struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null cyclades_port for (%s) in %s\n"; - static const char *badrange = - "Warning: cyclades_port out of range for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - - if( (long)info < (long)(&cy_port[0]) - || (long)(&cy_port[NR_PORTS]) < (long)info ){ - printk(badrange, name, routine); - return 1; - } - - if (info->magic != CYCLADES_MAGIC) { - printk(badmagic, name, routine); - return 1; - } + if (!info) { + printk("Warning: null cyclades_port for (%s) in %s\n", name, + routine); + return 1; + } + + if ((long)info < (long)(&cy_port[0]) + || (long)(&cy_port[NR_PORTS]) < (long)info) { + printk("Warning: cyclades_port out of range for (%s) in %s\n", + name, routine); + return 1; + } + + if (info->magic != CYCLADES_MAGIC) { + printk("Warning: bad magic number for serial struct (%s) in " + "%s\n", name, routine); + return 1; + } #endif return 0; -} /* serial_paranoia_check */ +} /* serial_paranoia_check */ #if 0 /* The following diagnostic routines allow the driver to spew information on the screen, even (especially!) during interrupts. */ -void -SP(char *data){ - unsigned long flags; - local_irq_save(flags); - console_print(data); - local_irq_restore(flags); +void SP(char *data) +{ + unsigned long flags; + local_irq_save(flags); + console_print(data); + local_irq_restore(flags); } + char scrn[2]; -void -CP(char data){ - unsigned long flags; - local_irq_save(flags); - scrn[0] = data; - console_print(scrn); - local_irq_restore(flags); -}/* CP */ +void CP(char data) +{ + unsigned long flags; + local_irq_save(flags); + scrn[0] = data; + console_print(scrn); + local_irq_restore(flags); +} /* CP */ -void CP1(int data) { (data<10)? CP(data+'0'): CP(data+'A'-10); }/* CP1 */ -void CP2(int data) { CP1((data>>4) & 0x0f); CP1( data & 0x0f); }/* CP2 */ -void CP4(int data) { CP2((data>>8) & 0xff); CP2(data & 0xff); }/* CP4 */ -void CP8(long data) { CP4((data>>16) & 0xffff); CP4(data & 0xffff); }/* CP8 */ +void CP1(int data) +{ + (data < 10) ? CP(data + '0') : CP(data + 'A' - 10); +} /* CP1 */ +void CP2(int data) +{ + CP1((data >> 4) & 0x0f); + CP1(data & 0x0f); +} /* CP2 */ +void CP4(int data) +{ + CP2((data >> 8) & 0xff); + CP2(data & 0xff); +} /* CP4 */ +void CP8(long data) +{ + CP4((data >> 16) & 0xffff); + CP4(data & 0xffff); +} /* CP8 */ #endif /* This routine waits up to 1000 micro-seconds for the previous @@ -270,87 +286,78 @@ void CP8(long data) { CP4((data>>16) & 0xffff); CP4(data & 0xffff); }/* CP8 */ new command. An error is returned if the previous command didn't finish within the time limit. */ -u_short -write_cy_cmd(volatile u_char *base_addr, u_char cmd) +u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd) { - unsigned long flags; - volatile int i; + unsigned long flags; + volatile int i; - local_irq_save(flags); + local_irq_save(flags); /* Check to see that the previous command has completed */ - for(i = 0 ; i < 100 ; i++){ - if (base_addr[CyCCR] == 0){ - break; - } - my_udelay(10L); + for (i = 0; i < 100; i++) { + if (base_addr[CyCCR] == 0) { + break; + } + my_udelay(10L); } /* if the CCR never cleared, the previous command - didn't finish within the "reasonable time" */ - if ( i == 10 ) { - local_irq_restore(flags); - return (-1); + didn't finish within the "reasonable time" */ + if (i == 10) { + local_irq_restore(flags); + return (-1); } /* Issue the new command */ base_addr[CyCCR] = cmd; - local_irq_restore(flags); - return(0); -} /* write_cy_cmd */ - + local_irq_restore(flags); + return (0); +} /* write_cy_cmd */ /* cy_start and cy_stop provide software output flow control as a function of XON/XOFF, software CTS, and other such stuff. */ -static void -cy_stop(struct tty_struct *tty) +static void cy_stop(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - unsigned long flags; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + unsigned long flags; #ifdef SERIAL_DEBUG_OTHER - printk("cy_stop %s\n", tty->name); /* */ + printk("cy_stop %s\n", tty->name); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_stop")) - return; - - channel = info->line; + if (serial_paranoia_check(info, tty->name, "cy_stop")) + return; - local_irq_save(flags); - base_addr[CyCAR] = (u_char)(channel); /* index channel */ - base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); - local_irq_restore(flags); + channel = info->line; - return; -} /* cy_stop */ + local_irq_save(flags); + base_addr[CyCAR] = (u_char) (channel); /* index channel */ + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + local_irq_restore(flags); +} /* cy_stop */ -static void -cy_start(struct tty_struct *tty) +static void cy_start(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - unsigned long flags; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + unsigned long flags; #ifdef SERIAL_DEBUG_OTHER - printk("cy_start %s\n", tty->name); /* */ + printk("cy_start %s\n", tty->name); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_start")) - return; - - channel = info->line; + if (serial_paranoia_check(info, tty->name, "cy_start")) + return; - local_irq_save(flags); - base_addr[CyCAR] = (u_char)(channel); - base_addr[CyIER] |= CyTxMpty; - local_irq_restore(flags); - - return; -} /* cy_start */ + channel = info->line; + local_irq_save(flags); + base_addr[CyCAR] = (u_char) (channel); + base_addr[CyIER] |= CyTxMpty; + local_irq_restore(flags); +} /* cy_start */ /* * This routine is used by the interrupt handler to schedule @@ -358,332 +365,332 @@ cy_start(struct tty_struct *tty) * (also known as the "bottom half"). This can be called any * number of times for any channel without harm. */ -static inline void -cy_sched_event(struct cyclades_port *info, int event) +static inline void cy_sched_event(struct cyclades_port *info, int event) { - info->event |= 1 << event; /* remember what kind of event and who */ - schedule_work(&info->tqueue); -} /* cy_sched_event */ - + info->event |= 1 << event; /* remember what kind of event and who */ + schedule_work(&info->tqueue); +} /* cy_sched_event */ /* The real interrupt service routines are called whenever the card wants its hand held--chars received, out buffer empty, modem change, etc. */ -static irqreturn_t -cd2401_rxerr_interrupt(int irq, void *dev_id) +static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id) { - struct tty_struct *tty; - struct cyclades_port *info; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - unsigned char err, rfoc; - int channel; - char data; - - /* determine the channel and change to that context */ - channel = (u_short ) (base_addr[CyLICR] >> 2); - info = &cy_port[channel]; - info->last_active = jiffies; - - if ((err = base_addr[CyRISR]) & CyTIMEOUT) { - /* This is a receive timeout interrupt, ignore it */ - base_addr[CyREOIR] = CyNOTRANS; - return IRQ_HANDLED; - } - - /* Read a byte of data if there is any - assume the error - * is associated with this character */ + struct tty_struct *tty; + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + unsigned char err, rfoc; + int channel; + char data; + + /* determine the channel and change to that context */ + channel = (u_short) (base_addr[CyLICR] >> 2); + info = &cy_port[channel]; + info->last_active = jiffies; + + if ((err = base_addr[CyRISR]) & CyTIMEOUT) { + /* This is a receive timeout interrupt, ignore it */ + base_addr[CyREOIR] = CyNOTRANS; + return IRQ_HANDLED; + } - if ((rfoc = base_addr[CyRFOC]) != 0) - data = base_addr[CyRDR]; - else - data = 0; + /* Read a byte of data if there is any - assume the error + * is associated with this character */ - /* if there is nowhere to put the data, discard it */ - if(info->tty == 0) { + if ((rfoc = base_addr[CyRFOC]) != 0) + data = base_addr[CyRDR]; + else + data = 0; + + /* if there is nowhere to put the data, discard it */ + if (info->tty == 0) { + base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; + return IRQ_HANDLED; + } else { /* there is an open port for this data */ + tty = info->tty; + if (err & info->ignore_status_mask) { + base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; + return IRQ_HANDLED; + } + if (tty_buffer_request_room(tty, 1) != 0) { + if (err & info->read_status_mask) { + if (err & CyBREAK) { + tty_insert_flip_char(tty, data, + TTY_BREAK); + if (info->flags & ASYNC_SAK) { + do_SAK(tty); + } + } else if (err & CyFRAME) { + tty_insert_flip_char(tty, data, + TTY_FRAME); + } else if (err & CyPARITY) { + tty_insert_flip_char(tty, data, + TTY_PARITY); + } else if (err & CyOVERRUN) { + tty_insert_flip_char(tty, 0, + TTY_OVERRUN); + /* + If the flip buffer itself is + overflowing, we still loose + the next incoming character. + */ + if (tty_buffer_request_room(tty, 1) != + 0) { + tty_insert_flip_char(tty, data, + TTY_FRAME); + } + /* These two conditions may imply */ + /* a normal read should be done. */ + /* else if(data & CyTIMEOUT) */ + /* else if(data & CySPECHAR) */ + } else { + tty_insert_flip_char(tty, 0, + TTY_NORMAL); + } + } else { + tty_insert_flip_char(tty, data, TTY_NORMAL); + } + } else { + /* there was a software buffer overrun + and nothing could be done about it!!! */ + } + } + tty_schedule_flip(tty); + /* end of service */ base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; return IRQ_HANDLED; - } - else { /* there is an open port for this data */ - tty = info->tty; - if(err & info->ignore_status_mask){ - base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; - return IRQ_HANDLED; - } - if (tty_buffer_request_room(tty, 1) != 0){ - if (err & info->read_status_mask){ - if(err & CyBREAK){ - tty_insert_flip_char(tty, data, TTY_BREAK); - if (info->flags & ASYNC_SAK){ - do_SAK(tty); - } - }else if(err & CyFRAME){ - tty_insert_flip_char(tty, data, TTY_FRAME); - }else if(err & CyPARITY){ - tty_insert_flip_char(tty, data, TTY_PARITY); - }else if(err & CyOVERRUN){ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - /* - If the flip buffer itself is - overflowing, we still loose - the next incoming character. - */ - if (tty_buffer_request_room(tty, 1) != 0){ - tty_insert_flip_char(tty, data, TTY_FRAME); - } - /* These two conditions may imply */ - /* a normal read should be done. */ - /* else if(data & CyTIMEOUT) */ - /* else if(data & CySPECHAR) */ - }else{ - tty_insert_flip_char(tty, 0, TTY_NORMAL); - } - }else{ - tty_insert_flip_char(tty, data, TTY_NORMAL); - } - }else{ - /* there was a software buffer overrun - and nothing could be done about it!!! */ - } - } - tty_schedule_flip(tty); - /* end of service */ - base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS; - return IRQ_HANDLED; -} /* cy_rxerr_interrupt */ - -static irqreturn_t -cd2401_modem_interrupt(int irq, void *dev_id) +} /* cy_rxerr_interrupt */ + +static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id) { - struct cyclades_port *info; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - int mdm_change; - int mdm_status; - - - /* determine the channel and change to that context */ - channel = (u_short ) (base_addr[CyLICR] >> 2); - info = &cy_port[channel]; - info->last_active = jiffies; - - mdm_change = base_addr[CyMISR]; - mdm_status = base_addr[CyMSVR1]; - - if(info->tty == 0){ /* nowhere to put the data, ignore it */ - ; - }else{ - if((mdm_change & CyDCD) - && (info->flags & ASYNC_CHECK_CD)){ - if(mdm_status & CyDCD){ + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + int mdm_change; + int mdm_status; + + /* determine the channel and change to that context */ + channel = (u_short) (base_addr[CyLICR] >> 2); + info = &cy_port[channel]; + info->last_active = jiffies; + + mdm_change = base_addr[CyMISR]; + mdm_status = base_addr[CyMSVR1]; + + if (info->tty == 0) { /* nowhere to put the data, ignore it */ + ; + } else { + if ((mdm_change & CyDCD) + && (info->flags & ASYNC_CHECK_CD)) { + if (mdm_status & CyDCD) { /* CP('!'); */ - cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP); - } else { + cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP); + } else { /* CP('@'); */ - cy_sched_event(info, Cy_EVENT_HANGUP); - } - } - if((mdm_change & CyCTS) - && (info->flags & ASYNC_CTS_FLOW)){ - if(info->tty->stopped){ - if(mdm_status & CyCTS){ - /* !!! cy_start isn't used because... */ - info->tty->stopped = 0; - base_addr[CyIER] |= CyTxMpty; - cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); + cy_sched_event(info, Cy_EVENT_HANGUP); + } } - }else{ - if(!(mdm_status & CyCTS)){ - /* !!! cy_stop isn't used because... */ - info->tty->stopped = 1; - base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); + if ((mdm_change & CyCTS) + && (info->flags & ASYNC_CTS_FLOW)) { + if (info->tty->stopped) { + if (mdm_status & CyCTS) { + /* !!! cy_start isn't used because... */ + info->tty->stopped = 0; + base_addr[CyIER] |= CyTxMpty; + cy_sched_event(info, + Cy_EVENT_WRITE_WAKEUP); + } + } else { + if (!(mdm_status & CyCTS)) { + /* !!! cy_stop isn't used because... */ + info->tty->stopped = 1; + base_addr[CyIER] &= + ~(CyTxMpty | CyTxRdy); + } + } + } + if (mdm_status & CyDSR) { } - } - } - if(mdm_status & CyDSR){ } - } - base_addr[CyMEOIR] = 0; - return IRQ_HANDLED; -} /* cy_modem_interrupt */ + base_addr[CyMEOIR] = 0; + return IRQ_HANDLED; +} /* cy_modem_interrupt */ -static irqreturn_t -cd2401_tx_interrupt(int irq, void *dev_id) +static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id) { - struct cyclades_port *info; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - int char_count, saved_cnt; - int outch; + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + int char_count, saved_cnt; + int outch; - /* determine the channel and change to that context */ - channel = (u_short ) (base_addr[CyLICR] >> 2); + /* determine the channel and change to that context */ + channel = (u_short) (base_addr[CyLICR] >> 2); #ifdef CONFIG_REMOTE_DEBUG - if (channel == DEBUG_PORT) { - panic ("TxInt on debug port!!!"); - } + if (channel == DEBUG_PORT) { + panic("TxInt on debug port!!!"); + } #endif - info = &cy_port[channel]; + info = &cy_port[channel]; - /* validate the port number (as configured and open) */ - if( (channel < 0) || (NR_PORTS <= channel) ){ - base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); - base_addr[CyTEOIR] = CyNOTRANS; - return IRQ_HANDLED; - } - info->last_active = jiffies; - if(info->tty == 0){ - base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); - if (info->xmit_cnt < WAKEUP_CHARS) { - cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); - } - base_addr[CyTEOIR] = CyNOTRANS; - return IRQ_HANDLED; - } - - /* load the on-chip space available for outbound data */ - saved_cnt = char_count = base_addr[CyTFTC]; - - if(info->x_char) { /* send special char */ - outch = info->x_char; - base_addr[CyTDR] = outch; - char_count--; - info->x_char = 0; - } - - if (info->x_break){ - /* The Cirrus chip requires the "Embedded Transmit - Commands" of start break, delay, and end break - sequences to be sent. The duration of the - break is given in TICs, which runs at HZ - (typically 100) and the PPR runs at 200 Hz, - so the delay is duration * 200/HZ, and thus a - break can run from 1/100 sec to about 5/4 sec. - Need to check these values - RGH 141095. - */ - base_addr[CyTDR] = 0; /* start break */ - base_addr[CyTDR] = 0x81; - base_addr[CyTDR] = 0; /* delay a bit */ - base_addr[CyTDR] = 0x82; - base_addr[CyTDR] = info->x_break*200/HZ; - base_addr[CyTDR] = 0; /* terminate break */ - base_addr[CyTDR] = 0x83; - char_count -= 7; - info->x_break = 0; - } - - while (char_count > 0){ - if (!info->xmit_cnt){ - base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); - break; - } - if (info->xmit_buf == 0){ - base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); - break; - } - if (info->tty->stopped || info->tty->hw_stopped){ - base_addr[CyIER] &= ~(CyTxMpty|CyTxRdy); - break; - } - /* Because the Embedded Transmit Commands have been - enabled, we must check to see if the escape - character, NULL, is being sent. If it is, we - must ensure that there is room for it to be - doubled in the output stream. Therefore we - no longer advance the pointer when the character - is fetched, but rather wait until after the check - for a NULL output character. (This is necessary - because there may not be room for the two chars - needed to send a NULL. - */ - outch = info->xmit_buf[info->xmit_tail]; - if( outch ){ - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) - & (PAGE_SIZE - 1); - base_addr[CyTDR] = outch; - char_count--; - }else{ - if(char_count > 1){ - info->xmit_cnt--; - info->xmit_tail = (info->xmit_tail + 1) - & (PAGE_SIZE - 1); + /* validate the port number (as configured and open) */ + if ((channel < 0) || (NR_PORTS <= channel)) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + base_addr[CyTEOIR] = CyNOTRANS; + return IRQ_HANDLED; + } + info->last_active = jiffies; + if (info->tty == 0) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + if (info->xmit_cnt < WAKEUP_CHARS) { + cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); + } + base_addr[CyTEOIR] = CyNOTRANS; + return IRQ_HANDLED; + } + + /* load the on-chip space available for outbound data */ + saved_cnt = char_count = base_addr[CyTFTC]; + + if (info->x_char) { /* send special char */ + outch = info->x_char; base_addr[CyTDR] = outch; - base_addr[CyTDR] = 0; char_count--; - char_count--; - }else{ - break; - } + info->x_char = 0; } - } - if (info->xmit_cnt < WAKEUP_CHARS) { - cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); - } - base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS; - return IRQ_HANDLED; -} /* cy_tx_interrupt */ + if (info->x_break) { + /* The Cirrus chip requires the "Embedded Transmit + Commands" of start break, delay, and end break + sequences to be sent. The duration of the + break is given in TICs, which runs at HZ + (typically 100) and the PPR runs at 200 Hz, + so the delay is duration * 200/HZ, and thus a + break can run from 1/100 sec to about 5/4 sec. + Need to check these values - RGH 141095. + */ + base_addr[CyTDR] = 0; /* start break */ + base_addr[CyTDR] = 0x81; + base_addr[CyTDR] = 0; /* delay a bit */ + base_addr[CyTDR] = 0x82; + base_addr[CyTDR] = info->x_break * 200 / HZ; + base_addr[CyTDR] = 0; /* terminate break */ + base_addr[CyTDR] = 0x83; + char_count -= 7; + info->x_break = 0; + } + + while (char_count > 0) { + if (!info->xmit_cnt) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + break; + } + if (info->xmit_buf == 0) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + break; + } + if (info->tty->stopped || info->tty->hw_stopped) { + base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy); + break; + } + /* Because the Embedded Transmit Commands have been + enabled, we must check to see if the escape + character, NULL, is being sent. If it is, we + must ensure that there is room for it to be + doubled in the output stream. Therefore we + no longer advance the pointer when the character + is fetched, but rather wait until after the check + for a NULL output character. (This is necessary + because there may not be room for the two chars + needed to send a NULL. + */ + outch = info->xmit_buf[info->xmit_tail]; + if (outch) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) + & (PAGE_SIZE - 1); + base_addr[CyTDR] = outch; + char_count--; + } else { + if (char_count > 1) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) + & (PAGE_SIZE - 1); + base_addr[CyTDR] = outch; + base_addr[CyTDR] = 0; + char_count--; + char_count--; + } else { + break; + } + } + } + + if (info->xmit_cnt < WAKEUP_CHARS) { + cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); + } + base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS; + return IRQ_HANDLED; +} /* cy_tx_interrupt */ -static irqreturn_t -cd2401_rx_interrupt(int irq, void *dev_id) +static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id) { - struct tty_struct *tty; - struct cyclades_port *info; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; - char data; - int char_count; - int save_cnt; - int len; - - /* determine the channel and change to that context */ - channel = (u_short ) (base_addr[CyLICR] >> 2); - info = &cy_port[channel]; - info->last_active = jiffies; - save_cnt = char_count = base_addr[CyRFOC]; + struct tty_struct *tty; + struct cyclades_port *info; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; + char data; + int char_count; + int save_cnt; + int len; + + /* determine the channel and change to that context */ + channel = (u_short) (base_addr[CyLICR] >> 2); + info = &cy_port[channel]; + info->last_active = jiffies; + save_cnt = char_count = base_addr[CyRFOC]; #ifdef CONFIG_REMOTE_DEBUG - if (channel == DEBUG_PORT) { - while (char_count--) { - data = base_addr[CyRDR]; - queueDebugChar(data); - } - } - else + if (channel == DEBUG_PORT) { + while (char_count--) { + data = base_addr[CyRDR]; + queueDebugChar(data); + } + } else #endif - /* if there is nowhere to put the data, discard it */ - if(info->tty == 0){ - while(char_count--){ - data = base_addr[CyRDR]; - } - }else{ /* there is an open port for this data */ - tty = info->tty; - /* load # characters available from the chip */ + /* if there is nowhere to put the data, discard it */ + if (info->tty == 0) { + while (char_count--) { + data = base_addr[CyRDR]; + } + } else { /* there is an open port for this data */ + tty = info->tty; + /* load # characters available from the chip */ #ifdef CYCLOM_ENABLE_MONITORING - ++info->mon.int_count; - info->mon.char_count += char_count; - if (char_count > info->mon.char_max) - info->mon.char_max = char_count; - info->mon.char_last = char_count; -#endif - len = tty_buffer_request_room(tty, char_count); - while(len--){ - data = base_addr[CyRDR]; - tty_insert_flip_char(tty, data, TTY_NORMAL); + ++info->mon.int_count; + info->mon.char_count += char_count; + if (char_count > info->mon.char_max) + info->mon.char_max = char_count; + info->mon.char_last = char_count; +#endif + len = tty_buffer_request_room(tty, char_count); + while (len--) { + data = base_addr[CyRDR]; + tty_insert_flip_char(tty, data, TTY_NORMAL); #ifdef CYCLOM_16Y_HACK - udelay(10L); + udelay(10L); #endif - } - tty_schedule_flip(tty); - } - /* end of service */ - base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS; - return IRQ_HANDLED; -} /* cy_rx_interrupt */ + } + tty_schedule_flip(tty); + } + /* end of service */ + base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS; + return IRQ_HANDLED; +} /* cy_rx_interrupt */ /* * This routine is used to handle the "bottom half" processing for the @@ -705,192 +712,188 @@ cd2401_rx_interrupt(int irq, void *dev_id) * structure) to the bottom half of the driver. Previous kernels * had to poll every port to see if that port needed servicing. */ -static void -do_softint(struct work_struct *ugly_api) +static void do_softint(struct work_struct *ugly_api) { - struct cyclades_port *info = container_of(ugly_api, struct cyclades_port, tqueue); - struct tty_struct *tty; - - tty = info->tty; - if (!tty) - return; + struct cyclades_port *info = + container_of(ugly_api, struct cyclades_port, tqueue); + struct tty_struct *tty; - if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { - tty_hangup(info->tty); - wake_up_interruptible(&info->open_wait); - info->flags &= ~ASYNC_NORMAL_ACTIVE; - } - if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) { - wake_up_interruptible(&info->open_wait); - } - if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) { - tty_wakeup(tty); - } -} /* do_softint */ + tty = info->tty; + if (!tty) + return; + if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { + tty_hangup(info->tty); + wake_up_interruptible(&info->open_wait); + info->flags &= ~ASYNC_NORMAL_ACTIVE; + } + if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) { + wake_up_interruptible(&info->open_wait); + } + if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) { + tty_wakeup(tty); + } +} /* do_softint */ /* This is called whenever a port becomes active; interrupts are enabled and DTR & RTS are turned on. */ -static int -startup(struct cyclades_port * info) +static int startup(struct cyclades_port *info) { - unsigned long flags; - volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; - int channel; + unsigned long flags; + volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; + int channel; - if (info->flags & ASYNC_INITIALIZED){ - return 0; - } + if (info->flags & ASYNC_INITIALIZED) { + return 0; + } - if (!info->type){ - if (info->tty){ - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (!info->type) { + if (info->tty) { + set_bit(TTY_IO_ERROR, &info->tty->flags); + } + return 0; } - return 0; - } - if (!info->xmit_buf){ - info->xmit_buf = (unsigned char *) get_zeroed_page (GFP_KERNEL); - if (!info->xmit_buf){ - return -ENOMEM; + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); + if (!info->xmit_buf) { + return -ENOMEM; + } } - } - config_setup(info); + config_setup(info); - channel = info->line; + channel = info->line; #ifdef SERIAL_DEBUG_OPEN - printk("startup channel %d\n", channel); + printk("startup channel %d\n", channel); #endif - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; - write_cy_cmd(base_addr,CyENB_RCVR|CyENB_XMTR); + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR); - base_addr[CyCAR] = (u_char)channel; /* !!! Is this needed? */ + base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */ base_addr[CyMSVR1] = CyRTS; /* CP('S');CP('1'); */ base_addr[CyMSVR2] = CyDTR; #ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: raising DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); #endif base_addr[CyIER] |= CyRxData; info->flags |= ASYNC_INITIALIZED; - if (info->tty){ - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->tty) { + clear_bit(TTY_IO_ERROR, &info->tty->flags); } info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - local_irq_restore(flags); + local_irq_restore(flags); #ifdef SERIAL_DEBUG_OPEN - printk(" done\n"); + printk(" done\n"); #endif - return 0; -} /* startup */ + return 0; +} /* startup */ -void -start_xmit( struct cyclades_port *info ) +void start_xmit(struct cyclades_port *info) { - unsigned long flags; - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; - channel = info->line; - local_irq_save(flags); + channel = info->line; + local_irq_save(flags); base_addr[CyCAR] = channel; base_addr[CyIER] |= CyTxMpty; - local_irq_restore(flags); -} /* start_xmit */ + local_irq_restore(flags); +} /* start_xmit */ /* * This routine shuts down a serial port; interrupts are disabled, * and DTR is dropped if the hangup on close termio flag is on. */ -static void -shutdown(struct cyclades_port * info) +static void shutdown(struct cyclades_port *info) { - unsigned long flags; - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; - if (!(info->flags & ASYNC_INITIALIZED)){ + if (!(info->flags & ASYNC_INITIALIZED)) { /* CP('$'); */ - return; - } + return; + } - channel = info->line; + channel = info->line; #ifdef SERIAL_DEBUG_OPEN - printk("shutdown channel %d\n", channel); + printk("shutdown channel %d\n", channel); #endif - /* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE - SENT BEFORE DROPPING THE LINE !!! (Perhaps - set some flag that is read when XMTY happens.) - Other choices are to delay some fixed interval - or schedule some later processing. - */ - local_irq_save(flags); - if (info->xmit_buf){ - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; + /* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE + SENT BEFORE DROPPING THE LINE !!! (Perhaps + set some flag that is read when XMTY happens.) + Other choices are to delay some fixed interval + or schedule some later processing. + */ + local_irq_save(flags); + if (info->xmit_buf) { + free_page((unsigned long)info->xmit_buf); + info->xmit_buf = NULL; } - base_addr[CyCAR] = (u_char)channel; + base_addr[CyCAR] = (u_char) channel; if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { - base_addr[CyMSVR1] = 0; + base_addr[CyMSVR1] = 0; /* CP('C');CP('1'); */ - base_addr[CyMSVR2] = 0; + base_addr[CyMSVR2] = 0; #ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: dropping DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); + printk("cyc: %d: dropping DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); #endif - } - write_cy_cmd(base_addr,CyDIS_RCVR); - /* it may be appropriate to clear _XMIT at - some later date (after testing)!!! */ + } + write_cy_cmd(base_addr, CyDIS_RCVR); + /* it may be appropriate to clear _XMIT at + some later date (after testing)!!! */ - if (info->tty){ - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->tty) { + set_bit(TTY_IO_ERROR, &info->tty->flags); } info->flags &= ~ASYNC_INITIALIZED; - local_irq_restore(flags); + local_irq_restore(flags); #ifdef SERIAL_DEBUG_OPEN - printk(" done\n"); + printk(" done\n"); #endif - return; -} /* shutdown */ +} /* shutdown */ /* * This routine finds or computes the various line characteristics. */ -static void -config_setup(struct cyclades_port * info) +static void config_setup(struct cyclades_port *info) { - unsigned long flags; - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; - unsigned cflag; - int i; - unsigned char ti, need_init_chan = 0; - - if (!info->tty || !info->tty->termios){ - return; - } - if (info->line == -1){ - return; - } - cflag = info->tty->termios->c_cflag; - - /* baud rate */ - i = cflag & CBAUD; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + unsigned cflag; + int i; + unsigned char ti, need_init_chan = 0; + + if (!info->tty || !info->tty->termios) { + return; + } + if (info->line == -1) { + return; + } + cflag = info->tty->termios->c_cflag; + + /* baud rate */ + i = cflag & CBAUD; #ifdef CBAUDEX /* Starting with kernel 1.1.65, there is direct support for higher baud rates. The following code supports those @@ -900,120 +903,123 @@ config_setup(struct cyclades_port * info) is still the possibility of supporting 75 kbit/sec with the Cyclades board.) */ - if (i & CBAUDEX) { - if (i == B57600) - i = 16; - else if(i == B115200) - i = 18; + if (i & CBAUDEX) { + if (i == B57600) + i = 16; + else if (i == B115200) + i = 18; #ifdef B78600 - else if(i == B78600) - i = 17; + else if (i == B78600) + i = 17; #endif - else - info->tty->termios->c_cflag &= ~CBAUDEX; - } -#endif - if (i == 15) { - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - i += 1; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - i += 3; - } - /* Don't ever change the speed of the console port. It will - * run at the speed specified in bootinfo, or at 19.2K */ - /* Actually, it should run at whatever speed 166Bug was using */ - /* Note info->timeout isn't used at present */ - if (info != serial_console_info) { - info->tbpr = baud_bpr[i]; /* Tx BPR */ - info->tco = baud_co[i]; /* Tx CO */ - info->rbpr = baud_bpr[i]; /* Rx BPR */ - info->rco = baud_co[i] >> 5; /* Rx CO */ - if (baud_table[i] == 134) { - info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2; - /* get it right for 134.5 baud */ - } else if (baud_table[i]) { - info->timeout = (info->xmit_fifo_size*HZ*15/baud_table[i]) + 2; - /* this needs to be propagated into the card info */ + else + info->tty->termios->c_cflag &= ~CBAUDEX; + } +#endif + if (i == 15) { + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + i += 1; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + i += 3; + } + /* Don't ever change the speed of the console port. It will + * run at the speed specified in bootinfo, or at 19.2K */ + /* Actually, it should run at whatever speed 166Bug was using */ + /* Note info->timeout isn't used at present */ + if (info != serial_console_info) { + info->tbpr = baud_bpr[i]; /* Tx BPR */ + info->tco = baud_co[i]; /* Tx CO */ + info->rbpr = baud_bpr[i]; /* Rx BPR */ + info->rco = baud_co[i] >> 5; /* Rx CO */ + if (baud_table[i] == 134) { + info->timeout = + (info->xmit_fifo_size * HZ * 30 / 269) + 2; + /* get it right for 134.5 baud */ + } else if (baud_table[i]) { + info->timeout = + (info->xmit_fifo_size * HZ * 15 / baud_table[i]) + + 2; + /* this needs to be propagated into the card info */ + } else { + info->timeout = 0; + } + } + /* By tradition (is it a standard?) a baud rate of zero + implies the line should be/has been closed. A bit + later in this routine such a test is performed. */ + + /* byte size and parity */ + info->cor7 = 0; + info->cor6 = 0; + info->cor5 = 0; + info->cor4 = (info->default_threshold ? info->default_threshold : baud_cor4[i]); /* receive threshold */ + /* Following two lines added 101295, RGH. */ + /* It is obviously wrong to access CyCORx, and not info->corx here, + * try and remember to fix it later! */ + channel = info->line; + base_addr[CyCAR] = (u_char) channel; + if (C_CLOCAL(info->tty)) { + if (base_addr[CyIER] & CyMdmCh) + base_addr[CyIER] &= ~CyMdmCh; /* without modem intr */ + /* ignore 1->0 modem transitions */ + if (base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) + base_addr[CyCOR4] &= ~(CyDSR | CyCTS | CyDCD); + /* ignore 0->1 modem transitions */ + if (base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) + base_addr[CyCOR5] &= ~(CyDSR | CyCTS | CyDCD); } else { - info->timeout = 0; - } - } - /* By tradition (is it a standard?) a baud rate of zero - implies the line should be/has been closed. A bit - later in this routine such a test is performed. */ - - /* byte size and parity */ - info->cor7 = 0; - info->cor6 = 0; - info->cor5 = 0; - info->cor4 = (info->default_threshold - ? info->default_threshold - : baud_cor4[i]); /* receive threshold */ - /* Following two lines added 101295, RGH. */ - /* It is obviously wrong to access CyCORx, and not info->corx here, - * try and remember to fix it later! */ - channel = info->line; - base_addr[CyCAR] = (u_char)channel; - if (C_CLOCAL(info->tty)) { - if (base_addr[CyIER] & CyMdmCh) - base_addr[CyIER] &= ~CyMdmCh; /* without modem intr */ - /* ignore 1->0 modem transitions */ - if (base_addr[CyCOR4] & (CyDSR|CyCTS|CyDCD)) - base_addr[CyCOR4] &= ~(CyDSR|CyCTS|CyDCD); - /* ignore 0->1 modem transitions */ - if (base_addr[CyCOR5] & (CyDSR|CyCTS|CyDCD)) - base_addr[CyCOR5] &= ~(CyDSR|CyCTS|CyDCD); - } else { - if ((base_addr[CyIER] & CyMdmCh) != CyMdmCh) - base_addr[CyIER] |= CyMdmCh; /* with modem intr */ - /* act on 1->0 modem transitions */ - if ((base_addr[CyCOR4] & (CyDSR|CyCTS|CyDCD)) != (CyDSR|CyCTS|CyDCD)) - base_addr[CyCOR4] |= CyDSR|CyCTS|CyDCD; - /* act on 0->1 modem transitions */ - if ((base_addr[CyCOR5] & (CyDSR|CyCTS|CyDCD)) != (CyDSR|CyCTS|CyDCD)) - base_addr[CyCOR5] |= CyDSR|CyCTS|CyDCD; - } - info->cor3 = (cflag & CSTOPB) ? Cy_2_STOP : Cy_1_STOP; - info->cor2 = CyETC; - switch(cflag & CSIZE){ - case CS5: - info->cor1 = Cy_5_BITS; - break; - case CS6: - info->cor1 = Cy_6_BITS; - break; - case CS7: - info->cor1 = Cy_7_BITS; - break; - case CS8: - info->cor1 = Cy_8_BITS; - break; - } - if (cflag & PARENB){ - if (cflag & PARODD){ - info->cor1 |= CyPARITY_O; - }else{ - info->cor1 |= CyPARITY_E; - } - }else{ - info->cor1 |= CyPARITY_NONE; - } - - /* CTS flow control flag */ + if ((base_addr[CyIER] & CyMdmCh) != CyMdmCh) + base_addr[CyIER] |= CyMdmCh; /* with modem intr */ + /* act on 1->0 modem transitions */ + if ((base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) != + (CyDSR | CyCTS | CyDCD)) + base_addr[CyCOR4] |= CyDSR | CyCTS | CyDCD; + /* act on 0->1 modem transitions */ + if ((base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) != + (CyDSR | CyCTS | CyDCD)) + base_addr[CyCOR5] |= CyDSR | CyCTS | CyDCD; + } + info->cor3 = (cflag & CSTOPB) ? Cy_2_STOP : Cy_1_STOP; + info->cor2 = CyETC; + switch (cflag & CSIZE) { + case CS5: + info->cor1 = Cy_5_BITS; + break; + case CS6: + info->cor1 = Cy_6_BITS; + break; + case CS7: + info->cor1 = Cy_7_BITS; + break; + case CS8: + info->cor1 = Cy_8_BITS; + break; + } + if (cflag & PARENB) { + if (cflag & PARODD) { + info->cor1 |= CyPARITY_O; + } else { + info->cor1 |= CyPARITY_E; + } + } else { + info->cor1 |= CyPARITY_NONE; + } + + /* CTS flow control flag */ #if 0 - /* Don't complcate matters for now! RGH 141095 */ - if (cflag & CRTSCTS){ - info->flags |= ASYNC_CTS_FLOW; - info->cor2 |= CyCtsAE; - }else{ - info->flags &= ~ASYNC_CTS_FLOW; - info->cor2 &= ~CyCtsAE; - } -#endif - if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; - else - info->flags |= ASYNC_CHECK_CD; + /* Don't complcate matters for now! RGH 141095 */ + if (cflag & CRTSCTS) { + info->flags |= ASYNC_CTS_FLOW; + info->cor2 |= CyCtsAE; + } else { + info->flags &= ~ASYNC_CTS_FLOW; + info->cor2 &= ~CyCtsAE; + } +#endif + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; /*********************************************** The hardware option, CyRtsAO, presents RTS when @@ -1025,149 +1031,146 @@ config_setup(struct cyclades_port * info) cable. Contact Marcio Saito for details. ***********************************************/ - channel = info->line; + channel = info->line; - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; /* CyCMR set once only in mvme167_init_serial() */ if (base_addr[CyLICR] != channel << 2) - base_addr[CyLICR] = channel << 2; + base_addr[CyLICR] = channel << 2; if (base_addr[CyLIVR] != 0x5c) - base_addr[CyLIVR] = 0x5c; + base_addr[CyLIVR] = 0x5c; - /* tx and rx baud rate */ + /* tx and rx baud rate */ if (base_addr[CyCOR1] != info->cor1) - need_init_chan = 1; + need_init_chan = 1; if (base_addr[CyTCOR] != info->tco) - base_addr[CyTCOR] = info->tco; + base_addr[CyTCOR] = info->tco; if (base_addr[CyTBPR] != info->tbpr) - base_addr[CyTBPR] = info->tbpr; + base_addr[CyTBPR] = info->tbpr; if (base_addr[CyRCOR] != info->rco) - base_addr[CyRCOR] = info->rco; + base_addr[CyRCOR] = info->rco; if (base_addr[CyRBPR] != info->rbpr) - base_addr[CyRBPR] = info->rbpr; + base_addr[CyRBPR] = info->rbpr; /* set line characteristics according configuration */ if (base_addr[CySCHR1] != START_CHAR(info->tty)) - base_addr[CySCHR1] = START_CHAR(info->tty); + base_addr[CySCHR1] = START_CHAR(info->tty); if (base_addr[CySCHR2] != STOP_CHAR(info->tty)) - base_addr[CySCHR2] = STOP_CHAR(info->tty); + base_addr[CySCHR2] = STOP_CHAR(info->tty); if (base_addr[CySCRL] != START_CHAR(info->tty)) - base_addr[CySCRL] = START_CHAR(info->tty); + base_addr[CySCRL] = START_CHAR(info->tty); if (base_addr[CySCRH] != START_CHAR(info->tty)) - base_addr[CySCRH] = START_CHAR(info->tty); + base_addr[CySCRH] = START_CHAR(info->tty); if (base_addr[CyCOR1] != info->cor1) - base_addr[CyCOR1] = info->cor1; + base_addr[CyCOR1] = info->cor1; if (base_addr[CyCOR2] != info->cor2) - base_addr[CyCOR2] = info->cor2; + base_addr[CyCOR2] = info->cor2; if (base_addr[CyCOR3] != info->cor3) - base_addr[CyCOR3] = info->cor3; + base_addr[CyCOR3] = info->cor3; if (base_addr[CyCOR4] != info->cor4) - base_addr[CyCOR4] = info->cor4; + base_addr[CyCOR4] = info->cor4; if (base_addr[CyCOR5] != info->cor5) - base_addr[CyCOR5] = info->cor5; + base_addr[CyCOR5] = info->cor5; if (base_addr[CyCOR6] != info->cor6) - base_addr[CyCOR6] = info->cor6; + base_addr[CyCOR6] = info->cor6; if (base_addr[CyCOR7] != info->cor7) - base_addr[CyCOR7] = info->cor7; + base_addr[CyCOR7] = info->cor7; if (need_init_chan) - write_cy_cmd(base_addr,CyINIT_CHAN); + write_cy_cmd(base_addr, CyINIT_CHAN); - base_addr[CyCAR] = (u_char)channel; /* !!! Is this needed? */ + base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */ /* 2ms default rx timeout */ ti = info->default_timeout ? info->default_timeout : 0x02; if (base_addr[CyRTPRL] != ti) - base_addr[CyRTPRL] = ti; + base_addr[CyRTPRL] = ti; if (base_addr[CyRTPRH] != 0) - base_addr[CyRTPRH] = 0; + base_addr[CyRTPRH] = 0; /* Set up RTS here also ????? RGH 141095 */ - if(i == 0){ /* baud rate is zero, turn off line */ - if ((base_addr[CyMSVR2] & CyDTR) == CyDTR) - base_addr[CyMSVR2] = 0; + if (i == 0) { /* baud rate is zero, turn off line */ + if ((base_addr[CyMSVR2] & CyDTR) == CyDTR) + base_addr[CyMSVR2] = 0; #ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: dropping DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); + printk("cyc: %d: dropping DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); #endif - }else{ - if ((base_addr[CyMSVR2] & CyDTR) != CyDTR) - base_addr[CyMSVR2] = CyDTR; + } else { + if ((base_addr[CyMSVR2] & CyDTR) != CyDTR) + base_addr[CyMSVR2] = CyDTR; #ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: raising DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); #endif } - if (info->tty){ - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->tty) { + clear_bit(TTY_IO_ERROR, &info->tty->flags); } - local_irq_restore(flags); - -} /* config_setup */ + local_irq_restore(flags); +} /* config_setup */ -static void -cy_put_char(struct tty_struct *tty, unsigned char ch) +static void cy_put_char(struct tty_struct *tty, unsigned char ch) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; #ifdef SERIAL_DEBUG_IO - printk("cy_put_char %s(0x%02x)\n", tty->name, ch); + printk("cy_put_char %s(0x%02x)\n", tty->name, ch); #endif - if (serial_paranoia_check(info, tty->name, "cy_put_char")) - return; + if (serial_paranoia_check(info, tty->name, "cy_put_char")) + return; - if (!info->xmit_buf) - return; + if (!info->xmit_buf) + return; - local_irq_save(flags); + local_irq_save(flags); if (info->xmit_cnt >= PAGE_SIZE - 1) { - local_irq_restore(flags); - return; + local_irq_restore(flags); + return; } info->xmit_buf[info->xmit_head++] = ch; info->xmit_head &= PAGE_SIZE - 1; info->xmit_cnt++; - local_irq_restore(flags); -} /* cy_put_char */ - + local_irq_restore(flags); +} /* cy_put_char */ -static void -cy_flush_chars(struct tty_struct *tty) +static void cy_flush_chars(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; - + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + #ifdef SERIAL_DEBUG_IO - printk("cy_flush_chars %s\n", tty->name); /* */ + printk("cy_flush_chars %s\n", tty->name); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) - return; + if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) + return; - if (info->xmit_cnt <= 0 || tty->stopped - || tty->hw_stopped || !info->xmit_buf) - return; + if (info->xmit_cnt <= 0 || tty->stopped + || tty->hw_stopped || !info->xmit_buf) + return; - channel = info->line; + channel = info->line; - local_irq_save(flags); + local_irq_save(flags); base_addr[CyCAR] = channel; base_addr[CyIER] |= CyTxMpty; - local_irq_restore(flags); -} /* cy_flush_chars */ - + local_irq_restore(flags); +} /* cy_flush_chars */ /* This routine gets called when tty_write has put something into the write_queue. If the port is not already transmitting stuff, @@ -1175,650 +1178,616 @@ cy_flush_chars(struct tty_struct *tty) routine will then ensure that the characters are sent. If the port is already active, there is no need to kick it. */ -static int -cy_write(struct tty_struct * tty, - const unsigned char *buf, int count) +static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; - int c, total = 0; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + int c, total = 0; #ifdef SERIAL_DEBUG_IO - printk("cy_write %s\n", tty->name); /* */ + printk("cy_write %s\n", tty->name); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_write")){ - return 0; - } - - if (!info->xmit_buf){ - return 0; - } - - while (1) { - local_irq_save(flags); - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) { - local_irq_restore(flags); - break; - } - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt += c; - local_irq_restore(flags); - - buf += c; - count -= c; - total += c; - } - - if (info->xmit_cnt - && !tty->stopped - && !tty->hw_stopped ) { - start_xmit(info); - } - return total; -} /* cy_write */ + if (serial_paranoia_check(info, tty->name, "cy_write")) { + return 0; + } + if (!info->xmit_buf) { + return 0; + } -static int -cy_write_room(struct tty_struct *tty) + while (1) { + local_irq_save(flags); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) { + local_irq_restore(flags); + break; + } + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + info->xmit_head = + (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1); + info->xmit_cnt += c; + local_irq_restore(flags); + + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + start_xmit(info); + } + return total; +} /* cy_write */ + +static int cy_write_room(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - int ret; - + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + int ret; + #ifdef SERIAL_DEBUG_IO - printk("cy_write_room %s\n", tty->name); /* */ + printk("cy_write_room %s\n", tty->name); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_write_room")) - return 0; - ret = PAGE_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} /* cy_write_room */ - + if (serial_paranoia_check(info, tty->name, "cy_write_room")) + return 0; + ret = PAGE_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} /* cy_write_room */ -static int -cy_chars_in_buffer(struct tty_struct *tty) +static int cy_chars_in_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + #ifdef SERIAL_DEBUG_IO - printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */ + printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) - return 0; - - return info->xmit_cnt; -} /* cy_chars_in_buffer */ + if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) + return 0; + return info->xmit_cnt; +} /* cy_chars_in_buffer */ -static void -cy_flush_buffer(struct tty_struct *tty) +static void cy_flush_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; - + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + #ifdef SERIAL_DEBUG_IO - printk("cy_flush_buffer %s\n", tty->name); /* */ + printk("cy_flush_buffer %s\n", tty->name); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) - return; - local_irq_save(flags); + if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) + return; + local_irq_save(flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - local_irq_restore(flags); - tty_wakeup(tty); -} /* cy_flush_buffer */ - + local_irq_restore(flags); + tty_wakeup(tty); +} /* cy_flush_buffer */ /* This routine is called by the upper-layer tty layer to signal that incoming characters should be throttled or that the throttle should be released. */ -static void -cy_throttle(struct tty_struct * tty) +static void cy_throttle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); - printk("cy_throttle %s\n", tty->name); + char buf[64]; + + printk("throttle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); + printk("cy_throttle %s\n", tty->name); #endif - if (serial_paranoia_check(info, tty->name, "cy_nthrottle")){ - return; - } + if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) { + return; + } - if (I_IXOFF(tty)) { - info->x_char = STOP_CHAR(tty); - /* Should use the "Send Special Character" feature!!! */ - } + if (I_IXOFF(tty)) { + info->x_char = STOP_CHAR(tty); + /* Should use the "Send Special Character" feature!!! */ + } - channel = info->line; + channel = info->line; - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; base_addr[CyMSVR1] = 0; - local_irq_restore(flags); - - return; -} /* cy_throttle */ - + local_irq_restore(flags); +} /* cy_throttle */ -static void -cy_unthrottle(struct tty_struct * tty) +static void cy_unthrottle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - unsigned long flags; - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); - printk("cy_unthrottle %s\n", tty->name); + char buf[64]; + + printk("throttle %s: %d....\n", tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); + printk("cy_unthrottle %s\n", tty->name); #endif - if (serial_paranoia_check(info, tty->name, "cy_nthrottle")){ - return; - } + if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) { + return; + } - if (I_IXOFF(tty)) { - info->x_char = START_CHAR(tty); - /* Should use the "Send Special Character" feature!!! */ - } + if (I_IXOFF(tty)) { + info->x_char = START_CHAR(tty); + /* Should use the "Send Special Character" feature!!! */ + } - channel = info->line; + channel = info->line; - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; base_addr[CyMSVR1] = CyRTS; - local_irq_restore(flags); - - return; -} /* cy_unthrottle */ + local_irq_restore(flags); +} /* cy_unthrottle */ static int -get_serial_info(struct cyclades_port * info, - struct serial_struct __user * retinfo) +get_serial_info(struct cyclades_port *info, + struct serial_struct __user * retinfo) { - struct serial_struct tmp; + struct serial_struct tmp; /* CP('g'); */ - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = info->line; - tmp.irq = 0; - tmp.flags = info->flags; - tmp.baud_base = 0; /*!!!*/ - tmp.close_delay = info->close_delay; - tmp.custom_divisor = 0; /*!!!*/ - tmp.hub6 = 0; /*!!!*/ - return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0; -} /* get_serial_info */ + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = info->line; + tmp.irq = 0; + tmp.flags = info->flags; + tmp.baud_base = 0; /*!!! */ + tmp.close_delay = info->close_delay; + tmp.custom_divisor = 0; /*!!! */ + tmp.hub6 = 0; /*!!! */ + return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; +} /* get_serial_info */ static int -set_serial_info(struct cyclades_port * info, - struct serial_struct __user * new_info) +set_serial_info(struct cyclades_port *info, + struct serial_struct __user * new_info) { - struct serial_struct new_serial; - struct cyclades_port old_info; + struct serial_struct new_serial; + struct cyclades_port old_info; /* CP('s'); */ - if (!new_info) - return -EFAULT; - if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) - return -EFAULT; - old_info = *info; + if (!new_info) + return -EFAULT; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) != + (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + goto check_and_exit; + } - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) != - (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - goto check_and_exit; - } + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->close_delay = new_serial.close_delay; - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ +check_and_exit: + if (info->flags & ASYNC_INITIALIZED) { + config_setup(info); + return 0; + } + return startup(info); +} /* set_serial_info */ - info->flags = ((info->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->close_delay = new_serial.close_delay; +static int cy_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + int channel; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + unsigned long flags; + unsigned char status; + channel = info->line; -check_and_exit: - if (info->flags & ASYNC_INITIALIZED){ - config_setup(info); - return 0; - }else{ - return startup(info); - } -} /* set_serial_info */ + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + status = base_addr[CyMSVR1] | base_addr[CyMSVR2]; + local_irq_restore(flags); -static int -cy_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - int channel; - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - unsigned long flags; - unsigned char status; - - channel = info->line; - - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; - status = base_addr[CyMSVR1] | base_addr[CyMSVR2]; - local_irq_restore(flags); - - return ((status & CyRTS) ? TIOCM_RTS : 0) - | ((status & CyDTR) ? TIOCM_DTR : 0) - | ((status & CyDCD) ? TIOCM_CAR : 0) - | ((status & CyDSR) ? TIOCM_DSR : 0) - | ((status & CyCTS) ? TIOCM_CTS : 0); -} /* cy_tiocmget */ + return ((status & CyRTS) ? TIOCM_RTS : 0) + | ((status & CyDTR) ? TIOCM_DTR : 0) + | ((status & CyDCD) ? TIOCM_CAR : 0) + | ((status & CyDSR) ? TIOCM_DSR : 0) + | ((status & CyCTS) ? TIOCM_CTS : 0); +} /* cy_tiocmget */ static int cy_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - int channel; - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - unsigned long flags; - - channel = info->line; - - if (set & TIOCM_RTS){ - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + int channel; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + unsigned long flags; + + channel = info->line; + + if (set & TIOCM_RTS) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; base_addr[CyMSVR1] = CyRTS; - local_irq_restore(flags); + local_irq_restore(flags); } - if (set & TIOCM_DTR){ - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; + if (set & TIOCM_DTR) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; /* CP('S');CP('2'); */ - base_addr[CyMSVR2] = CyDTR; + base_addr[CyMSVR2] = CyDTR; #ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: raising DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); #endif - local_irq_restore(flags); + local_irq_restore(flags); } - if (clear & TIOCM_RTS){ - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; + if (clear & TIOCM_RTS) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; base_addr[CyMSVR1] = 0; - local_irq_restore(flags); + local_irq_restore(flags); } - if (clear & TIOCM_DTR){ - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; + if (clear & TIOCM_DTR) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; /* CP('C');CP('2'); */ - base_addr[CyMSVR2] = 0; + base_addr[CyMSVR2] = 0; #ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: dropping DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); + printk("cyc: %d: dropping DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); #endif - local_irq_restore(flags); + local_irq_restore(flags); } - return 0; -} /* set_modem_info */ - -static void -send_break( struct cyclades_port * info, int duration) -{ /* Let the transmit ISR take care of this (since it - requires stuffing characters into the output stream). - */ - info->x_break = duration; - if (!info->xmit_cnt ) { - start_xmit(info); - } -} /* send_break */ + return 0; +} /* set_modem_info */ + +static void send_break(struct cyclades_port *info, int duration) +{ /* Let the transmit ISR take care of this (since it + requires stuffing characters into the output stream). + */ + info->x_break = duration; + if (!info->xmit_cnt) { + start_xmit(info); + } +} /* send_break */ static int -get_mon_info(struct cyclades_port * info, struct cyclades_monitor __user * mon) +get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon) { - if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) - return -EFAULT; - info->mon.int_count = 0; - info->mon.char_count = 0; - info->mon.char_max = 0; - info->mon.char_last = 0; - return 0; + if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) + return -EFAULT; + info->mon.int_count = 0; + info->mon.char_count = 0; + info->mon.char_max = 0; + info->mon.char_last = 0; + return 0; } -static int -set_threshold(struct cyclades_port * info, unsigned long __user *arg) +static int set_threshold(struct cyclades_port *info, unsigned long __user * arg) { - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - unsigned long value; - int channel; - - if (get_user(value, arg)) - return -EFAULT; - - channel = info->line; - info->cor4 &= ~CyREC_FIFO; - info->cor4 |= value & CyREC_FIFO; - base_addr[CyCOR4] = info->cor4; - return 0; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + unsigned long value; + int channel; + + if (get_user(value, arg)) + return -EFAULT; + + channel = info->line; + info->cor4 &= ~CyREC_FIFO; + info->cor4 |= value & CyREC_FIFO; + base_addr[CyCOR4] = info->cor4; + return 0; } static int -get_threshold(struct cyclades_port * info, unsigned long __user *value) +get_threshold(struct cyclades_port *info, unsigned long __user * value) { - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; - unsigned long tmp; - - channel = info->line; - - tmp = base_addr[CyCOR4] & CyREC_FIFO; - return put_user(tmp,value); + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + unsigned long tmp; + + channel = info->line; + + tmp = base_addr[CyCOR4] & CyREC_FIFO; + return put_user(tmp, value); } static int -set_default_threshold(struct cyclades_port * info, unsigned long __user *arg) +set_default_threshold(struct cyclades_port *info, unsigned long __user * arg) { - unsigned long value; + unsigned long value; - if (get_user(value, arg)) - return -EFAULT; + if (get_user(value, arg)) + return -EFAULT; - info->default_threshold = value & 0x0f; - return 0; + info->default_threshold = value & 0x0f; + return 0; } static int -get_default_threshold(struct cyclades_port * info, unsigned long __user *value) +get_default_threshold(struct cyclades_port *info, unsigned long __user * value) { - return put_user(info->default_threshold,value); + return put_user(info->default_threshold, value); } -static int -set_timeout(struct cyclades_port * info, unsigned long __user *arg) +static int set_timeout(struct cyclades_port *info, unsigned long __user * arg) { - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; - unsigned long value; - - if (get_user(value, arg)) - return -EFAULT; - - channel = info->line; - - base_addr[CyRTPRL] = value & 0xff; - base_addr[CyRTPRH] = (value >> 8) & 0xff; - return 0; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + unsigned long value; + + if (get_user(value, arg)) + return -EFAULT; + + channel = info->line; + + base_addr[CyRTPRL] = value & 0xff; + base_addr[CyRTPRH] = (value >> 8) & 0xff; + return 0; } -static int -get_timeout(struct cyclades_port * info, unsigned long __user *value) +static int get_timeout(struct cyclades_port *info, unsigned long __user * value) { - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; - unsigned long tmp; - - channel = info->line; - - tmp = base_addr[CyRTPRL]; - return put_user(tmp,value); + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + unsigned long tmp; + + channel = info->line; + + tmp = base_addr[CyRTPRL]; + return put_user(tmp, value); } -static int -set_default_timeout(struct cyclades_port * info, unsigned long value) +static int set_default_timeout(struct cyclades_port *info, unsigned long value) { - info->default_timeout = value & 0xff; - return 0; + info->default_timeout = value & 0xff; + return 0; } static int -get_default_timeout(struct cyclades_port * info, unsigned long __user *value) +get_default_timeout(struct cyclades_port *info, unsigned long __user * value) { - return put_user(info->default_timeout,value); + return put_user(info->default_timeout, value); } static int -cy_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) +cy_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { - unsigned long val; - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - int ret_val = 0; - void __user *argp = (void __user *)arg; + unsigned long val; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + int ret_val = 0; + void __user *argp = (void __user *)arg; #ifdef SERIAL_DEBUG_OTHER - printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */ -#endif - - switch (cmd) { - case CYGETMON: - ret_val = get_mon_info(info, argp); - break; - case CYGETTHRESH: - ret_val = get_threshold(info, argp); - break; - case CYSETTHRESH: - ret_val = set_threshold(info, argp); - break; - case CYGETDEFTHRESH: - ret_val = get_default_threshold(info, argp); - break; - case CYSETDEFTHRESH: - ret_val = set_default_threshold(info, argp); - break; - case CYGETTIMEOUT: - ret_val = get_timeout(info, argp); - break; - case CYSETTIMEOUT: - ret_val = set_timeout(info, argp); - break; - case CYGETDEFTIMEOUT: - ret_val = get_default_timeout(info, argp); - break; - case CYSETDEFTIMEOUT: - ret_val = set_default_timeout(info, (unsigned long)arg); - break; - case TCSBRK: /* SVID version: non-zero arg --> no break */ - ret_val = tty_check_change(tty); - if (ret_val) - break; - tty_wait_until_sent(tty,0); - if (!arg) - send_break(info, HZ/4); /* 1/4 second */ - break; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - ret_val = tty_check_change(tty); - if (ret_val) + printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */ +#endif + + switch (cmd) { + case CYGETMON: + ret_val = get_mon_info(info, argp); + break; + case CYGETTHRESH: + ret_val = get_threshold(info, argp); + break; + case CYSETTHRESH: + ret_val = set_threshold(info, argp); + break; + case CYGETDEFTHRESH: + ret_val = get_default_threshold(info, argp); + break; + case CYSETDEFTHRESH: + ret_val = set_default_threshold(info, argp); + break; + case CYGETTIMEOUT: + ret_val = get_timeout(info, argp); + break; + case CYSETTIMEOUT: + ret_val = set_timeout(info, argp); + break; + case CYGETDEFTIMEOUT: + ret_val = get_default_timeout(info, argp); + break; + case CYSETDEFTIMEOUT: + ret_val = set_default_timeout(info, (unsigned long)arg); + break; + case TCSBRK: /* SVID version: non-zero arg --> no break */ + ret_val = tty_check_change(tty); + if (ret_val) + break; + tty_wait_until_sent(tty, 0); + if (!arg) + send_break(info, HZ / 4); /* 1/4 second */ + break; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + ret_val = tty_check_change(tty); + if (ret_val) + break; + tty_wait_until_sent(tty, 0); + send_break(info, arg ? arg * (HZ / 10) : HZ / 4); break; - tty_wait_until_sent(tty,0); - send_break(info, arg ? arg*(HZ/10) : HZ/4); - break; /* The following commands are incompletely implemented!!! */ - case TIOCGSOFTCAR: - ret_val = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) argp); - break; - case TIOCSSOFTCAR: - ret_val = get_user(val, (unsigned long __user *) argp); - if (ret_val) - break; - tty->termios->c_cflag = - ((tty->termios->c_cflag & ~CLOCAL) | (val ? CLOCAL : 0)); - break; - case TIOCGSERIAL: - ret_val = get_serial_info(info, argp); - break; - case TIOCSSERIAL: - ret_val = set_serial_info(info, argp); - break; - default: - ret_val = -ENOIOCTLCMD; - } + case TIOCGSOFTCAR: + ret_val = + put_user(C_CLOCAL(tty) ? 1 : 0, + (unsigned long __user *)argp); + break; + case TIOCSSOFTCAR: + ret_val = get_user(val, (unsigned long __user *)argp); + if (ret_val) + break; + tty->termios->c_cflag = + ((tty->termios->c_cflag & ~CLOCAL) | (val ? CLOCAL : 0)); + break; + case TIOCGSERIAL: + ret_val = get_serial_info(info, argp); + break; + case TIOCSSERIAL: + ret_val = set_serial_info(info, argp); + break; + default: + ret_val = -ENOIOCTLCMD; + } #ifdef SERIAL_DEBUG_OTHER - printk("cy_ioctl done\n"); + printk("cy_ioctl done\n"); #endif - return ret_val; -} /* cy_ioctl */ - + return ret_val; +} /* cy_ioctl */ - - -static void -cy_set_termios(struct tty_struct *tty, struct ktermios * old_termios) +static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; #ifdef SERIAL_DEBUG_OTHER - printk("cy_set_termios %s\n", tty->name); + printk("cy_set_termios %s\n", tty->name); #endif - if (tty->termios->c_cflag == old_termios->c_cflag) - return; - config_setup(info); + if (tty->termios->c_cflag == old_termios->c_cflag) + return; + config_setup(info); - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->stopped = 0; - cy_start(tty); - } + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->stopped = 0; + cy_start(tty); + } #ifdef tytso_patch_94Nov25_1726 - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->open_wait); + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->open_wait); #endif +} /* cy_set_termios */ - return; -} /* cy_set_termios */ - - -static void -cy_close(struct tty_struct * tty, struct file * filp) +static void cy_close(struct tty_struct *tty, struct file *filp) { - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; /* CP('C'); */ #ifdef SERIAL_DEBUG_OTHER - printk("cy_close %s\n", tty->name); + printk("cy_close %s\n", tty->name); #endif - if (!info - || serial_paranoia_check(info, tty->name, "cy_close")){ - return; - } + if (!info || serial_paranoia_check(info, tty->name, "cy_close")) { + return; + } #ifdef SERIAL_DEBUG_OPEN - printk("cy_close %s, count = %d\n", tty->name, info->count); -#endif - - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("cy_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } + printk("cy_close %s, count = %d\n", tty->name, info->count); +#endif + + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("cy_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } #ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count - 1); + printk("cyc: %d: decrementing count to %d\n", __LINE__, + info->count - 1); #endif - if (--info->count < 0) { - printk("cy_close: bad serial port count for ttys%d: %d\n", - info->line, info->count); + if (--info->count < 0) { + printk("cy_close: bad serial port count for ttys%d: %d\n", + info->line, info->count); #ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: setting count to 0\n", __LINE__); + printk("cyc: %d: setting count to 0\n", __LINE__); #endif - info->count = 0; - } - if (info->count) - return; - info->flags |= ASYNC_CLOSING; - if (info->flags & ASYNC_INITIALIZED) - tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */ - shutdown(info); - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - tty_ldisc_flush(tty); - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); + info->count = 0; } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); + if (info->count) + return; + info->flags |= ASYNC_CLOSING; + if (info->flags & ASYNC_INITIALIZED) + tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */ + shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + tty_ldisc_flush(tty); + info->event = 0; + info->tty = NULL; + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs + (info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); #ifdef SERIAL_DEBUG_OTHER - printk("cy_close done\n"); + printk("cy_close done\n"); #endif - - return; -} /* cy_close */ +} /* cy_close */ /* * cy_hangup() --- called by tty_hangup() when a hangup is signaled. */ -void -cy_hangup(struct tty_struct *tty) +void cy_hangup(struct tty_struct *tty) { - struct cyclades_port * info = (struct cyclades_port *)tty->driver_data; - + struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + #ifdef SERIAL_DEBUG_OTHER - printk("cy_hangup %s\n", tty->name); /* */ + printk("cy_hangup %s\n", tty->name); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_hangup")) - return; - - shutdown(info); + if (serial_paranoia_check(info, tty->name, "cy_hangup")) + return; + + shutdown(info); #if 0 - info->event = 0; - info->count = 0; + info->event = 0; + info->count = 0; #ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: setting count to 0\n", __LINE__); + printk("cyc: %d: setting count to 0\n", __LINE__); #endif - info->tty = 0; + info->tty = 0; #endif - info->flags &= ~ASYNC_NORMAL_ACTIVE; - wake_up_interruptible(&info->open_wait); -} /* cy_hangup */ - - + info->flags &= ~ASYNC_NORMAL_ACTIVE; + wake_up_interruptible(&info->open_wait); +} /* cy_hangup */ /* * ------------------------------------------------------------ @@ -1827,177 +1796,180 @@ cy_hangup(struct tty_struct *tty) */ static int -block_til_ready(struct tty_struct *tty, struct file * filp, - struct cyclades_port *info) +block_til_ready(struct tty_struct *tty, struct file *filp, + struct cyclades_port *info) { - DECLARE_WAITQUEUE(wait, current); - unsigned long flags; - int channel; - int retval; - volatile u_char *base_addr = (u_char *)BASE_ADDR; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (info->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&info->close_wait); - if (info->flags & ASYNC_HUP_NOTIFY){ - return -EAGAIN; - }else{ - return -ERESTARTSYS; - } - } - - /* - * If non-blocking mode is set, then make the check up front - * and then exit. - */ - if (filp->f_flags & O_NONBLOCK) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * cy_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); + DECLARE_WAITQUEUE(wait, current); + unsigned long flags; + int channel; + int retval; + volatile u_char *base_addr = (u_char *) BASE_ADDR; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&info->close_wait); + if (info->flags & ASYNC_HUP_NOTIFY) { + return -EAGAIN; + } else { + return -ERESTARTSYS; + } + } + + /* + * If non-blocking mode is set, then make the check up front + * and then exit. + */ + if (filp->f_flags & O_NONBLOCK) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * cy_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); #ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: %s, count = %d\n", - tty->name, info->count);/**/ + printk("block_til_ready before block: %s, count = %d\n", + tty->name, info->count); + /**/ #endif - info->count--; + info->count--; #ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count); + printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count); #endif - info->blocked_open++; + info->blocked_open++; - channel = info->line; + channel = info->line; - while (1) { - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; - base_addr[CyMSVR1] = CyRTS; + while (1) { + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; + base_addr[CyMSVR1] = CyRTS; /* CP('S');CP('4'); */ - base_addr[CyMSVR2] = CyDTR; + base_addr[CyMSVR2] = CyDTR; #ifdef SERIAL_DEBUG_DTR - printk("cyc: %d: raising DTR\n", __LINE__); - printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], base_addr[CyMSVR2]); -#endif - local_irq_restore(flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) - || !(info->flags & ASYNC_INITIALIZED) ){ - if (info->flags & ASYNC_HUP_NOTIFY) { - retval = -EAGAIN; - }else{ - retval = -ERESTARTSYS; - } - break; - } - local_irq_save(flags); - base_addr[CyCAR] = (u_char)channel; + printk("cyc: %d: raising DTR\n", __LINE__); + printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1], + base_addr[CyMSVR2]); +#endif + local_irq_restore(flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) + || !(info->flags & ASYNC_INITIALIZED)) { + if (info->flags & ASYNC_HUP_NOTIFY) { + retval = -EAGAIN; + } else { + retval = -ERESTARTSYS; + } + break; + } + local_irq_save(flags); + base_addr[CyCAR] = (u_char) channel; /* CP('L');CP1(1 && C_CLOCAL(tty)); CP1(1 && (base_addr[CyMSVR1] & CyDCD) ); */ - if (!(info->flags & ASYNC_CLOSING) - && (C_CLOCAL(tty) - || (base_addr[CyMSVR1] & CyDCD))) { - local_irq_restore(flags); - break; - } - local_irq_restore(flags); - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } + if (!(info->flags & ASYNC_CLOSING) + && (C_CLOCAL(tty) + || (base_addr[CyMSVR1] & CyDCD))) { + local_irq_restore(flags); + break; + } + local_irq_restore(flags); + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } #ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: %s, count = %d\n", - tty->name, info->count);/**/ -#endif - schedule(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)){ - info->count++; + printk("block_til_ready blocking: %s, count = %d\n", + tty->name, info->count); + /**/ +#endif + schedule(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) { + info->count++; #ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count); + printk("cyc: %d: incrementing count to %d\n", __LINE__, + info->count); #endif - } - info->blocked_open--; + } + info->blocked_open--; #ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: %s, count = %d\n", - tty->name, info->count);/**/ + printk("block_til_ready after blocking: %s, count = %d\n", + tty->name, info->count); + /**/ #endif - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} /* block_til_ready */ + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} /* block_til_ready */ /* * This routine is called whenever a serial port is opened. It * performs the serial-specific initialization for the tty structure. */ -int -cy_open(struct tty_struct *tty, struct file * filp) +int cy_open(struct tty_struct *tty, struct file *filp) { - struct cyclades_port *info; - int retval, line; + struct cyclades_port *info; + int retval, line; /* CP('O'); */ - line = tty->index; - if ((line < 0) || (NR_PORTS <= line)){ - return -ENODEV; - } - info = &cy_port[line]; - if (info->line < 0){ - return -ENODEV; - } + line = tty->index; + if ((line < 0) || (NR_PORTS <= line)) { + return -ENODEV; + } + info = &cy_port[line]; + if (info->line < 0) { + return -ENODEV; + } #ifdef SERIAL_DEBUG_OTHER - printk("cy_open %s\n", tty->name); /* */ + printk("cy_open %s\n", tty->name); /* */ #endif - if (serial_paranoia_check(info, tty->name, "cy_open")){ - return -ENODEV; - } + if (serial_paranoia_check(info, tty->name, "cy_open")) { + return -ENODEV; + } #ifdef SERIAL_DEBUG_OPEN - printk("cy_open %s, count = %d\n", tty->name, info->count);/**/ + printk("cy_open %s, count = %d\n", tty->name, info->count); + /**/ #endif - info->count++; + info->count++; #ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count); + printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count); #endif - tty->driver_data = info; - info->tty = tty; + tty->driver_data = info; + info->tty = tty; - /* - * Start up serial port - */ - retval = startup(info); - if (retval){ - return retval; - } + /* + * Start up serial port + */ + retval = startup(info); + if (retval) { + return retval; + } - retval = block_til_ready(tty, filp, info); - if (retval) { + retval = block_til_ready(tty, filp, info); + if (retval) { #ifdef SERIAL_DEBUG_OPEN - printk("cy_open returning after block_til_ready with %d\n", - retval); + printk("cy_open returning after block_til_ready with %d\n", + retval); #endif - return retval; - } - + return retval; + } #ifdef SERIAL_DEBUG_OPEN - printk("cy_open done\n");/**/ + printk("cy_open done\n"); + /**/ #endif - return 0; -} /* cy_open */ - - + return 0; +} /* cy_open */ /* * --------------------------------------------------------------------- @@ -2012,11 +1984,10 @@ cy_open(struct tty_struct *tty, struct file * filp) * number, and identifies which options were configured into this * driver. */ -static void -show_version(void) +static void show_version(void) { - printk("MVME166/167 cd2401 driver\n"); -} /* show_version */ + printk("MVME166/167 cd2401 driver\n"); +} /* show_version */ /* initialize chips on card -- return number of valid chips (which is number of ports/4) */ @@ -2030,10 +2001,9 @@ show_version(void) * ... I wonder what I should do if this fails ... */ -void -mvme167_serial_console_setup(int cflag) +void mvme167_serial_console_setup(int cflag) { - volatile unsigned char* base_addr = (u_char *)BASE_ADDR; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int ch; u_char spd; u_char rcor, rbpr, badspeed = 0; @@ -2062,21 +2032,21 @@ mvme167_serial_console_setup(int cflag) /* OK, we have chosen a speed, now reset and reinitialise */ - my_udelay(20000L); /* Allow time for any active o/p to complete */ - if(base_addr[CyCCR] != 0x00){ - local_irq_restore(flags); - /* printk(" chip is never idle (CCR != 0)\n"); */ - return; - } + my_udelay(20000L); /* Allow time for any active o/p to complete */ + if (base_addr[CyCCR] != 0x00) { + local_irq_restore(flags); + /* printk(" chip is never idle (CCR != 0)\n"); */ + return; + } - base_addr[CyCCR] = CyCHIP_RESET; /* Reset the chip */ - my_udelay(1000L); + base_addr[CyCCR] = CyCHIP_RESET; /* Reset the chip */ + my_udelay(1000L); - if(base_addr[CyGFRCR] == 0x00){ - local_irq_restore(flags); - /* printk(" chip is not responding (GFRCR stayed 0)\n"); */ - return; - } + if (base_addr[CyGFRCR] == 0x00) { + local_irq_restore(flags); + /* printk(" chip is not responding (GFRCR stayed 0)\n"); */ + return; + } /* * System clock is 20Mhz, divided by 2048, so divide by 10 for a 1.0ms @@ -2085,9 +2055,9 @@ mvme167_serial_console_setup(int cflag) base_addr[CyTPR] = 10; - base_addr[CyPILR1] = 0x01; /* Interrupt level for modem change */ - base_addr[CyPILR2] = 0x02; /* Interrupt level for tx ints */ - base_addr[CyPILR3] = 0x03; /* Interrupt level for rx ints */ + base_addr[CyPILR1] = 0x01; /* Interrupt level for modem change */ + base_addr[CyPILR2] = 0x02; /* Interrupt level for tx ints */ + base_addr[CyPILR3] = 0x03; /* Interrupt level for rx ints */ /* * Attempt to set up all channels to something reasonable, and @@ -2095,11 +2065,11 @@ mvme167_serial_console_setup(int cflag) * the ammount of fiddling we have to do in normal running. */ - for (ch = 3; ch >= 0 ; ch--) { - base_addr[CyCAR] = (u_char)ch; + for (ch = 3; ch >= 0; ch--) { + base_addr[CyCAR] = (u_char) ch; base_addr[CyIER] = 0; base_addr[CyCMR] = CyASYNC; - base_addr[CyLICR] = (u_char)ch << 2; + base_addr[CyLICR] = (u_char) ch << 2; base_addr[CyLIVR] = 0x5c; base_addr[CyTCOR] = baud_co[spd]; base_addr[CyTBPR] = baud_bpr[spd]; @@ -2118,29 +2088,30 @@ mvme167_serial_console_setup(int cflag) base_addr[CyCOR7] = 0; base_addr[CyRTPRL] = 2; base_addr[CyRTPRH] = 0; - base_addr[CyMSVR1] = 0; - base_addr[CyMSVR2] = 0; - write_cy_cmd(base_addr,CyINIT_CHAN|CyDIS_RCVR|CyDIS_XMTR); + base_addr[CyMSVR1] = 0; + base_addr[CyMSVR2] = 0; + write_cy_cmd(base_addr, CyINIT_CHAN | CyDIS_RCVR | CyDIS_XMTR); } /* * Now do specials for channel zero.... */ - base_addr[CyMSVR1] = CyRTS; - base_addr[CyMSVR2] = CyDTR; + base_addr[CyMSVR1] = CyRTS; + base_addr[CyMSVR2] = CyDTR; base_addr[CyIER] = CyRxData; - write_cy_cmd(base_addr,CyENB_RCVR|CyENB_XMTR); + write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR); local_irq_restore(flags); my_udelay(20000L); /* Let it all settle down */ - printk("CD2401 initialised, chip is rev 0x%02x\n", base_addr[CyGFRCR]); + printk("CD2401 initialised, chip is rev 0x%02x\n", base_addr[CyGFRCR]); if (badspeed) - printk(" WARNING: Failed to identify line speed, rcor=%02x,rbpr=%02x\n", - rcor >> 5, rbpr); -} /* serial_console_init */ + printk + (" WARNING: Failed to identify line speed, rcor=%02x,rbpr=%02x\n", + rcor >> 5, rbpr); +} /* serial_console_init */ static const struct tty_operations cy_ops = { .open = cy_open, @@ -2161,6 +2132,7 @@ static const struct tty_operations cy_ops = { .tiocmget = cy_tiocmget, .tiocmset = cy_tiocmset, }; + /* The serial driver boot-time initialization code! Hardware I/O ports are mapped to character special devices on a first found, first allocated manner. That is, this code searches @@ -2177,214 +2149,214 @@ static const struct tty_operations cy_ops = { If there are more cards with more ports than have been statically allocated above, a warning is printed and the extra ports are ignored. */ -static int __init -serial167_init(void) +static int __init serial167_init(void) { - struct cyclades_port *info; - int ret = 0; - int good_ports = 0; - int port_num = 0; - int index; - int DefSpeed; + struct cyclades_port *info; + int ret = 0; + int good_ports = 0; + int port_num = 0; + int index; + int DefSpeed; #ifdef notyet - struct sigaction sa; + struct sigaction sa; #endif - if (!(mvme16x_config &MVME16x_CONFIG_GOT_CD2401)) - return 0; + if (!(mvme16x_config & MVME16x_CONFIG_GOT_CD2401)) + return 0; - cy_serial_driver = alloc_tty_driver(NR_PORTS); - if (!cy_serial_driver) - return -ENOMEM; + cy_serial_driver = alloc_tty_driver(NR_PORTS); + if (!cy_serial_driver) + return -ENOMEM; #if 0 -scrn[1] = '\0'; + scrn[1] = '\0'; #endif - show_version(); + show_version(); - /* Has "console=0,9600n8" been used in bootinfo to change speed? */ - if (serial_console_cflag) - DefSpeed = serial_console_cflag & 0017; - else { - DefSpeed = initial_console_speed; - serial_console_info = &cy_port[0]; - serial_console_cflag = DefSpeed | CS8; + /* Has "console=0,9600n8" been used in bootinfo to change speed? */ + if (serial_console_cflag) + DefSpeed = serial_console_cflag & 0017; + else { + DefSpeed = initial_console_speed; + serial_console_info = &cy_port[0]; + serial_console_cflag = DefSpeed | CS8; #if 0 - serial_console = 64; /*callout_driver.minor_start*/ -#endif - } - - /* Initialize the tty_driver structure */ - - cy_serial_driver->owner = THIS_MODULE; - cy_serial_driver->name = "ttyS"; - cy_serial_driver->major = TTY_MAJOR; - cy_serial_driver->minor_start = 64; - cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; - cy_serial_driver->init_termios = tty_std_termios; - cy_serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - cy_serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(cy_serial_driver, &cy_ops); + serial_console = 64; /*callout_driver.minor_start */ +#endif + } - ret = tty_register_driver(cy_serial_driver); - if (ret) { - printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n"); - put_tty_driver(cy_serial_driver); - return ret; - } + /* Initialize the tty_driver structure */ - port_num = 0; - info = cy_port; - for (index = 0; index < 1; index++) { + cy_serial_driver->owner = THIS_MODULE; + cy_serial_driver->name = "ttyS"; + cy_serial_driver->major = TTY_MAJOR; + cy_serial_driver->minor_start = 64; + cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; + cy_serial_driver->init_termios = tty_std_termios; + cy_serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + cy_serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(cy_serial_driver, &cy_ops); + + ret = tty_register_driver(cy_serial_driver); + if (ret) { + printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n"); + put_tty_driver(cy_serial_driver); + return ret; + } - good_ports = 4; + port_num = 0; + info = cy_port; + for (index = 0; index < 1; index++) { - if(port_num < NR_PORTS){ - while( good_ports-- && port_num < NR_PORTS){ + good_ports = 4; + + if (port_num < NR_PORTS) { + while (good_ports-- && port_num < NR_PORTS) { /*** initialize port ***/ - info->magic = CYCLADES_MAGIC; - info->type = PORT_CIRRUS; - info->card = index; - info->line = port_num; - info->flags = STD_COM_FLAGS; - info->tty = NULL; - info->xmit_fifo_size = 12; - info->cor1 = CyPARITY_NONE|Cy_8_BITS; - info->cor2 = CyETC; - info->cor3 = Cy_1_STOP; - info->cor4 = 0x08; /* _very_ small receive threshold */ - info->cor5 = 0; - info->cor6 = 0; - info->cor7 = 0; - info->tbpr = baud_bpr[DefSpeed]; /* Tx BPR */ - info->tco = baud_co[DefSpeed]; /* Tx CO */ - info->rbpr = baud_bpr[DefSpeed]; /* Rx BPR */ - info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */ - info->close_delay = 0; - info->x_char = 0; - info->event = 0; - info->count = 0; + info->magic = CYCLADES_MAGIC; + info->type = PORT_CIRRUS; + info->card = index; + info->line = port_num; + info->flags = STD_COM_FLAGS; + info->tty = NULL; + info->xmit_fifo_size = 12; + info->cor1 = CyPARITY_NONE | Cy_8_BITS; + info->cor2 = CyETC; + info->cor3 = Cy_1_STOP; + info->cor4 = 0x08; /* _very_ small receive threshold */ + info->cor5 = 0; + info->cor6 = 0; + info->cor7 = 0; + info->tbpr = baud_bpr[DefSpeed]; /* Tx BPR */ + info->tco = baud_co[DefSpeed]; /* Tx CO */ + info->rbpr = baud_bpr[DefSpeed]; /* Rx BPR */ + info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */ + info->close_delay = 0; + info->x_char = 0; + info->event = 0; + info->count = 0; #ifdef SERIAL_DEBUG_COUNT - printk("cyc: %d: setting count to 0\n", __LINE__); -#endif - info->blocked_open = 0; - info->default_threshold = 0; - info->default_timeout = 0; - INIT_WORK(&info->tqueue, do_softint); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - /* info->session */ - /* info->pgrp */ + printk("cyc: %d: setting count to 0\n", + __LINE__); +#endif + info->blocked_open = 0; + info->default_threshold = 0; + info->default_timeout = 0; + INIT_WORK(&info->tqueue, do_softint); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + /* info->session */ + /* info->pgrp */ /*** !!!!!!!! this may expose new bugs !!!!!!!!! *********/ - info->read_status_mask = CyTIMEOUT| CySPECHAR| CyBREAK - | CyPARITY| CyFRAME| CyOVERRUN; - /* info->timeout */ - - printk("ttyS%d ", info->line); - port_num++;info++; - if(!(port_num & 7)){ - printk("\n "); + info->read_status_mask = + CyTIMEOUT | CySPECHAR | CyBREAK | CyPARITY | + CyFRAME | CyOVERRUN; + /* info->timeout */ + + printk("ttyS%d ", info->line); + port_num++; + info++; + if (!(port_num & 7)) { + printk("\n "); + } + } } - } - } - printk("\n"); - } - while( port_num < NR_PORTS){ - info->line = -1; - port_num++;info++; - } + printk("\n"); + } + while (port_num < NR_PORTS) { + info->line = -1; + port_num++; + info++; + } #ifdef CONFIG_REMOTE_DEBUG - debug_setup(); -#endif - ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0, - "cd2401_errors", cd2401_rxerr_interrupt); - if (ret) { - printk(KERN_ERR "Could't get cd2401_errors IRQ"); - goto cleanup_serial_driver; - } - - ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0, - "cd2401_modem", cd2401_modem_interrupt); - if (ret) { - printk(KERN_ERR "Could't get cd2401_modem IRQ"); - goto cleanup_irq_cd2401_errors; - } - - ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0, - "cd2401_txints", cd2401_tx_interrupt); - if (ret) { - printk(KERN_ERR "Could't get cd2401_txints IRQ"); - goto cleanup_irq_cd2401_modem; - } - - ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0, - "cd2401_rxints", cd2401_rx_interrupt); - if (ret) { - printk(KERN_ERR "Could't get cd2401_rxints IRQ"); - goto cleanup_irq_cd2401_txints; - } - - /* Now we have registered the interrupt handlers, allow the interrupts */ - - pcc2chip[PccSCCMICR] = 0x15; /* Serial ints are level 5 */ - pcc2chip[PccSCCTICR] = 0x15; - pcc2chip[PccSCCRICR] = 0x15; - - pcc2chip[PccIMLR] = 3; /* Allow PCC2 ints above 3!? */ - - return 0; + debug_setup(); +#endif + ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0, + "cd2401_errors", cd2401_rxerr_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_errors IRQ"); + goto cleanup_serial_driver; + } + + ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0, + "cd2401_modem", cd2401_modem_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_modem IRQ"); + goto cleanup_irq_cd2401_errors; + } + + ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0, + "cd2401_txints", cd2401_tx_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_txints IRQ"); + goto cleanup_irq_cd2401_modem; + } + + ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0, + "cd2401_rxints", cd2401_rx_interrupt); + if (ret) { + printk(KERN_ERR "Could't get cd2401_rxints IRQ"); + goto cleanup_irq_cd2401_txints; + } + + /* Now we have registered the interrupt handlers, allow the interrupts */ + + pcc2chip[PccSCCMICR] = 0x15; /* Serial ints are level 5 */ + pcc2chip[PccSCCTICR] = 0x15; + pcc2chip[PccSCCRICR] = 0x15; + + pcc2chip[PccIMLR] = 3; /* Allow PCC2 ints above 3!? */ + + return 0; cleanup_irq_cd2401_txints: - free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt); + free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt); cleanup_irq_cd2401_modem: - free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt); + free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt); cleanup_irq_cd2401_errors: - free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt); + free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt); cleanup_serial_driver: - if (tty_unregister_driver(cy_serial_driver)) - printk(KERN_ERR "Couldn't unregister MVME166/7 serial driver\n"); - put_tty_driver(cy_serial_driver); - return ret; -} /* serial167_init */ + if (tty_unregister_driver(cy_serial_driver)) + printk(KERN_ERR + "Couldn't unregister MVME166/7 serial driver\n"); + put_tty_driver(cy_serial_driver); + return ret; +} /* serial167_init */ module_init(serial167_init); - #ifdef CYCLOM_SHOW_STATUS -static void -show_status(int line_num) +static void show_status(int line_num) { - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int channel; - struct cyclades_port * info; - unsigned long flags; - - info = &cy_port[line_num]; - channel = info->line; - printk(" channel %d\n", channel);/**/ - - printk(" cy_port\n"); - printk(" card line flags = %d %d %x\n", - info->card, info->line, info->flags); - printk(" *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n", - (long)info->tty, info->read_status_mask, - info->timeout, info->xmit_fifo_size); - printk(" cor1,cor2,cor3,cor4,cor5,cor6,cor7 = %x %x %x %x %x %x %x\n", - info->cor1, info->cor2, info->cor3, info->cor4, info->cor5, - info->cor6, info->cor7); - printk(" tbpr,tco,rbpr,rco = %d %d %d %d\n", - info->tbpr, info->tco, info->rbpr, info->rco); - printk(" close_delay event count = %d %d %d\n", - info->close_delay, info->event, info->count); - printk(" x_char blocked_open = %x %x\n", - info->x_char, info->blocked_open); - printk(" open_wait = %lx %lx %lx\n", - (long)info->open_wait); - - - local_irq_save(flags); + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int channel; + struct cyclades_port *info; + unsigned long flags; + + info = &cy_port[line_num]; + channel = info->line; + printk(" channel %d\n", channel); + /**/ printk(" cy_port\n"); + printk(" card line flags = %d %d %x\n", + info->card, info->line, info->flags); + printk + (" *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n", + (long)info->tty, info->read_status_mask, info->timeout, + info->xmit_fifo_size); + printk(" cor1,cor2,cor3,cor4,cor5,cor6,cor7 = %x %x %x %x %x %x %x\n", + info->cor1, info->cor2, info->cor3, info->cor4, info->cor5, + info->cor6, info->cor7); + printk(" tbpr,tco,rbpr,rco = %d %d %d %d\n", info->tbpr, info->tco, + info->rbpr, info->rco); + printk(" close_delay event count = %d %d %d\n", info->close_delay, + info->event, info->count); + printk(" x_char blocked_open = %x %x\n", info->x_char, + info->blocked_open); + printk(" open_wait = %lx %lx %lx\n", (long)info->open_wait); + + local_irq_save(flags); /* Global Registers */ @@ -2398,7 +2370,7 @@ show_status(int line_num) printk(" CyMIR %x\n", base_addr[CyMIR]); printk(" CyTPR %x\n", base_addr[CyTPR]); - base_addr[CyCAR] = (u_char)channel; + base_addr[CyCAR] = (u_char) channel; /* Virtual Registers */ @@ -2442,11 +2414,10 @@ show_status(int line_num) printk(" CyTBPR %x\n", base_addr[CyTBPR]); printk(" CyTCOR %x\n", base_addr[CyTCOR]); - local_irq_restore(flags); -} /* show_status */ + local_irq_restore(flags); +} /* show_status */ #endif - #if 0 /* Dummy routine in mvme16x/config.c for now */ @@ -2459,61 +2430,67 @@ void console_setup(char *str, int *ints) int cflag = 0; /* Sanity check. */ - if (ints[0] > 3 || ints[1] > 3) return; + if (ints[0] > 3 || ints[1] > 3) + return; /* Get baud, bits and parity */ baud = 2400; bits = 8; parity = 'n'; - if (ints[2]) baud = ints[2]; + if (ints[2]) + baud = ints[2]; if ((s = strchr(str, ','))) { do { s++; - } while(*s >= '0' && *s <= '9'); - if (*s) parity = *s++; - if (*s) bits = *s - '0'; + } while (*s >= '0' && *s <= '9'); + if (*s) + parity = *s++; + if (*s) + bits = *s - '0'; } /* Now construct a cflag setting. */ - switch(baud) { - case 1200: - cflag |= B1200; - break; - case 9600: - cflag |= B9600; - break; - case 19200: - cflag |= B19200; - break; - case 38400: - cflag |= B38400; - break; - case 2400: - default: - cflag |= B2400; - break; + switch (baud) { + case 1200: + cflag |= B1200; + break; + case 9600: + cflag |= B9600; + break; + case 19200: + cflag |= B19200; + break; + case 38400: + cflag |= B38400; + break; + case 2400: + default: + cflag |= B2400; + break; } - switch(bits) { - case 7: - cflag |= CS7; - break; - default: - case 8: - cflag |= CS8; - break; + switch (bits) { + case 7: + cflag |= CS7; + break; + default: + case 8: + cflag |= CS8; + break; } - switch(parity) { - case 'o': case 'O': - cflag |= PARODD; - break; - case 'e': case 'E': - cflag |= PARENB; - break; + switch (parity) { + case 'o': + case 'O': + cflag |= PARODD; + break; + case 'e': + case 'E': + cflag |= PARENB; + break; } serial_console_info = &cy_port[ints[1]]; serial_console_cflag = cflag; - serial_console = ints[1] + 64; /*callout_driver.minor_start*/ + serial_console = ints[1] + 64; /*callout_driver.minor_start */ } #endif @@ -2532,9 +2509,10 @@ void console_setup(char *str, int *ints) * The console must be locked when we get here. */ -void serial167_console_write(struct console *co, const char *str, unsigned count) +void serial167_console_write(struct console *co, const char *str, + unsigned count) { - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; unsigned long flags; volatile u_char sink; u_char ier; @@ -2547,7 +2525,7 @@ void serial167_console_write(struct console *co, const char *str, unsigned count /* Ensure transmitter is enabled! */ port = 0; - base_addr[CyCAR] = (u_char)port; + base_addr[CyCAR] = (u_char) port; while (base_addr[CyCCR]) ; base_addr[CyCCR] = CyENB_XMTR; @@ -2556,8 +2534,7 @@ void serial167_console_write(struct console *co, const char *str, unsigned count base_addr[CyIER] = CyTxMpty; while (1) { - if (pcc2chip[PccSCCTICR] & 0x20) - { + if (pcc2chip[PccSCCTICR] & 0x20) { /* We have a Tx int. Acknowledge it */ sink = pcc2chip[PccTPIACKR]; if ((base_addr[CyLICR] >> 2) == port) { @@ -2571,18 +2548,15 @@ void serial167_console_write(struct console *co, const char *str, unsigned count str++; i++; do_lf = 0; - } - else if (*str == '\n') { + } else if (*str == '\n') { base_addr[CyTDR] = '\r'; do_lf = 1; - } - else { + } else { base_addr[CyTDR] = *str++; i++; } base_addr[CyTEOIR] = 0; - } - else + } else base_addr[CyTEOIR] = CyNOTRANS; } } @@ -2592,45 +2566,44 @@ void serial167_console_write(struct console *co, const char *str, unsigned count local_irq_restore(flags); } -static struct tty_driver *serial167_console_device(struct console *c, int *index) +static struct tty_driver *serial167_console_device(struct console *c, + int *index) { *index = c->index; return cy_serial_driver; } - static int __init serial167_console_setup(struct console *co, char *options) { return 0; } - static struct console sercons = { - .name = "ttyS", - .write = serial167_console_write, - .device = serial167_console_device, - .setup = serial167_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, + .name = "ttyS", + .write = serial167_console_write, + .device = serial167_console_device, + .setup = serial167_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, }; - static int __init serial167_console_init(void) { if (vme_brdtype == VME_TYPE_MVME166 || - vme_brdtype == VME_TYPE_MVME167 || - vme_brdtype == VME_TYPE_MVME177) { + vme_brdtype == VME_TYPE_MVME167 || + vme_brdtype == VME_TYPE_MVME177) { mvme167_serial_console_setup(0); register_console(&sercons); } return 0; } + console_initcall(serial167_console_init); #ifdef CONFIG_REMOTE_DEBUG -void putDebugChar (int c) +void putDebugChar(int c) { - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; unsigned long flags; volatile u_char sink; u_char ier; @@ -2641,7 +2614,7 @@ void putDebugChar (int c) /* Ensure transmitter is enabled! */ port = DEBUG_PORT; - base_addr[CyCAR] = (u_char)port; + base_addr[CyCAR] = (u_char) port; while (base_addr[CyCCR]) ; base_addr[CyCCR] = CyENB_XMTR; @@ -2650,16 +2623,14 @@ void putDebugChar (int c) base_addr[CyIER] = CyTxMpty; while (1) { - if (pcc2chip[PccSCCTICR] & 0x20) - { + if (pcc2chip[PccSCCTICR] & 0x20) { /* We have a Tx int. Acknowledge it */ sink = pcc2chip[PccTPIACKR]; if ((base_addr[CyLICR] >> 2) == port) { base_addr[CyTDR] = c; base_addr[CyTEOIR] = 0; break; - } - else + } else base_addr[CyTEOIR] = CyNOTRANS; } } @@ -2671,7 +2642,7 @@ void putDebugChar (int c) int getDebugChar() { - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; unsigned long flags; volatile u_char sink; u_char ier; @@ -2693,7 +2664,7 @@ int getDebugChar() /* Ensure receiver is enabled! */ port = DEBUG_PORT; - base_addr[CyCAR] = (u_char)port; + base_addr[CyCAR] = (u_char) port; #if 0 while (base_addr[CyCCR]) ; @@ -2703,31 +2674,30 @@ int getDebugChar() base_addr[CyIER] = CyRxData; while (1) { - if (pcc2chip[PccSCCRICR] & 0x20) - { + if (pcc2chip[PccSCCRICR] & 0x20) { /* We have a Rx int. Acknowledge it */ sink = pcc2chip[PccRPIACKR]; if ((base_addr[CyLICR] >> 2) == port) { int cnt = base_addr[CyRFOC]; - while (cnt-- > 0) - { + while (cnt-- > 0) { c = base_addr[CyRDR]; if (c == 0) - printk ("!! debug char is null (cnt=%d) !!", cnt); + printk + ("!! debug char is null (cnt=%d) !!", + cnt); else - queueDebugChar (c); + queueDebugChar(c); } base_addr[CyREOIR] = 0; i = debugiq.out; if (i == debugiq.in) - panic ("Debug input queue empty!"); + panic("Debug input queue empty!"); c = debugiq.buf[i]; if (++i == DEBUG_LEN) i = 0; debugiq.out = i; break; - } - else + } else base_addr[CyREOIR] = CyNOTRANS; } } @@ -2739,7 +2709,7 @@ int getDebugChar() return (c); } -void queueDebugChar (int c) +void queueDebugChar(int c) { int i; @@ -2751,73 +2721,71 @@ void queueDebugChar (int c) debugiq.in = i; } -static void -debug_setup() +static void debug_setup() { - unsigned long flags; - volatile unsigned char *base_addr = (u_char *)BASE_ADDR; - int i, cflag; + unsigned long flags; + volatile unsigned char *base_addr = (u_char *) BASE_ADDR; + int i, cflag; - cflag = B19200; + cflag = B19200; - local_irq_save(flags); + local_irq_save(flags); - for (i = 0; i < 4; i++) - { - base_addr[CyCAR] = i; - base_addr[CyLICR] = i << 2; - } + for (i = 0; i < 4; i++) { + base_addr[CyCAR] = i; + base_addr[CyLICR] = i << 2; + } - debugiq.in = debugiq.out = 0; + debugiq.in = debugiq.out = 0; - base_addr[CyCAR] = DEBUG_PORT; + base_addr[CyCAR] = DEBUG_PORT; - /* baud rate */ - i = cflag & CBAUD; + /* baud rate */ + i = cflag & CBAUD; - base_addr[CyIER] = 0; + base_addr[CyIER] = 0; - base_addr[CyCMR] = CyASYNC; - base_addr[CyLICR] = DEBUG_PORT << 2; - base_addr[CyLIVR] = 0x5c; + base_addr[CyCMR] = CyASYNC; + base_addr[CyLICR] = DEBUG_PORT << 2; + base_addr[CyLIVR] = 0x5c; - /* tx and rx baud rate */ + /* tx and rx baud rate */ - base_addr[CyTCOR] = baud_co[i]; - base_addr[CyTBPR] = baud_bpr[i]; - base_addr[CyRCOR] = baud_co[i] >> 5; - base_addr[CyRBPR] = baud_bpr[i]; + base_addr[CyTCOR] = baud_co[i]; + base_addr[CyTBPR] = baud_bpr[i]; + base_addr[CyRCOR] = baud_co[i] >> 5; + base_addr[CyRBPR] = baud_bpr[i]; - /* set line characteristics according configuration */ + /* set line characteristics according configuration */ - base_addr[CySCHR1] = 0; - base_addr[CySCHR2] = 0; - base_addr[CySCRL] = 0; - base_addr[CySCRH] = 0; - base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE; - base_addr[CyCOR2] = 0; - base_addr[CyCOR3] = Cy_1_STOP; - base_addr[CyCOR4] = baud_cor4[i]; - base_addr[CyCOR5] = 0; - base_addr[CyCOR6] = 0; - base_addr[CyCOR7] = 0; + base_addr[CySCHR1] = 0; + base_addr[CySCHR2] = 0; + base_addr[CySCRL] = 0; + base_addr[CySCRH] = 0; + base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE; + base_addr[CyCOR2] = 0; + base_addr[CyCOR3] = Cy_1_STOP; + base_addr[CyCOR4] = baud_cor4[i]; + base_addr[CyCOR5] = 0; + base_addr[CyCOR6] = 0; + base_addr[CyCOR7] = 0; - write_cy_cmd(base_addr,CyINIT_CHAN); - write_cy_cmd(base_addr,CyENB_RCVR); + write_cy_cmd(base_addr, CyINIT_CHAN); + write_cy_cmd(base_addr, CyENB_RCVR); - base_addr[CyCAR] = DEBUG_PORT; /* !!! Is this needed? */ + base_addr[CyCAR] = DEBUG_PORT; /* !!! Is this needed? */ - base_addr[CyRTPRL] = 2; - base_addr[CyRTPRH] = 0; + base_addr[CyRTPRL] = 2; + base_addr[CyRTPRH] = 0; - base_addr[CyMSVR1] = CyRTS; - base_addr[CyMSVR2] = CyDTR; + base_addr[CyMSVR1] = CyRTS; + base_addr[CyMSVR2] = CyDTR; - base_addr[CyIER] = CyRxData; + base_addr[CyIER] = CyRxData; - local_irq_restore(flags); + local_irq_restore(flags); -} /* debug_setup */ +} /* debug_setup */ #endif -- 2.39.5