From 43f83a8f9963a11a9c3f41beecc363da21ae3602 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 May 2008 01:37:26 -0400 Subject: [PATCH] Input: wm9713 - support five wire panels Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wm9713.c | 22 ++++++++++++++++++++++ include/linux/wm97xx.h | 1 + 2 files changed, 23 insertions(+) diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c index 01278bd7e6..838458792e 100644 --- a/drivers/input/touchscreen/wm9713.c +++ b/drivers/input/touchscreen/wm9713.c @@ -84,6 +84,15 @@ static int delay = 4; module_param(delay, int, 0); MODULE_PARM_DESC(delay, "Set adc sample delay."); +/* + * Set five_wire = 1 to use a 5 wire touchscreen. + * + * NOTE: Five wire mode does not allow for readback of pressure. + */ +static int five_wire; +module_param(five_wire, int, 0); +MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen."); + /* * Set adc mask function. * @@ -162,6 +171,19 @@ static void wm9713_phy_init(struct wm97xx *wm) 64000 / rpu); } + /* Five wire panel? */ + if (five_wire) { + dig3 |= WM9713_45W; + dev_info(wm->dev, "setting 5-wire touchscreen mode."); + + if (pil) { + dev_warn(wm->dev, + "Pressure measurement not supported in 5 " + "wire mode, disabling\n"); + pil = 0; + } + } + /* touchpanel pressure */ if (pil == 2) { dig3 |= WM9712_PIL; diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 4d13732e9c..6f69968eab 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -100,6 +100,7 @@ #define WM9713_ADCSEL_Y 0x0004 /* Y measurement */ #define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */ #define WM9713_COO 0x0001 /* enable coordinate mode */ +#define WM9713_45W 0x1000 /* set for 5 wire panel */ #define WM9713_PDEN 0x0800 /* measure only when pen down */ #define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */ #define WM9713_WAIT 0x0200 /* coordinate wait */ -- 2.39.5