From 4330f5da98eb91392c7a7b00c22a24c57079c0fc Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 16 Mar 2007 09:32:17 -0500 Subject: [PATCH] [POWERPC] Created arch/powerpc/platforms/Kconfig for "Platform support" Split "Platform support" menu out from arch/powerpc/Kconfig into arch/powerpc/platforms/Kconfig in prep for allowing other sub-arches to be configured via a single "Platform support" menu. Signed-off-by: Kumar Gala --- arch/powerpc/Kconfig | 220 +-------------------------------- arch/powerpc/platforms/Kconfig | 219 ++++++++++++++++++++++++++++++++ 2 files changed, 220 insertions(+), 219 deletions(-) create mode 100644 arch/powerpc/platforms/Kconfig diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c5014ba19f..20aae16cba 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -367,225 +367,7 @@ endmenu source "init/Kconfig" -menu "Platform support" - depends on PPC64 || CLASSIC32 - -choice - prompt "Machine type" - default PPC_MULTIPLATFORM - -config PPC_MULTIPLATFORM - bool "Generic desktop/server/laptop" - help - Select this option if configuring for an IBM pSeries or - RS/6000 machine, an Apple machine, or a PReP, CHRP, - Maple or Cell-based machine. - -config EMBEDDED6xx - bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 && (BROKEN||BROKEN_ON_SMP) - -config APUS - bool "Amiga-APUS" - depends on PPC32 && BROKEN - help - Select APUS if configuring for a PowerUP Amiga. - More information is available at: - . -endchoice - -config QUICC_ENGINE - bool - depends on PPC_MPC836x || PPC_MPC832x - default y - help - The QUICC Engine (QE) is a new generation of communications - coprocessors on Freescale embedded CPUs (akin to CPM in older chips). - Selecting this option means that you wish to build a kernel - for a machine with a QE coprocessor. - -source "arch/powerpc/platforms/pseries/Kconfig" -source "arch/powerpc/platforms/iseries/Kconfig" -source "arch/powerpc/platforms/chrp/Kconfig" -source "arch/powerpc/platforms/52xx/Kconfig" -source "arch/powerpc/platforms/powermac/Kconfig" -source "arch/powerpc/platforms/prep/Kconfig" -source "arch/powerpc/platforms/maple/Kconfig" -source "arch/powerpc/platforms/pasemi/Kconfig" -source arch/powerpc/platforms/celleb/Kconfig -source arch/powerpc/platforms/ps3/Kconfig -source arch/powerpc/platforms/cell/Kconfig - -config PPC_NATIVE - bool - depends on PPC_MULTIPLATFORM - help - Support for running natively on the hardware, i.e. without - a hypervisor. This option is not user-selectable but should - be selected by all platforms that need it. - -config UDBG_RTAS_CONSOLE - bool "RTAS based debug console" - depends on PPC_RTAS - default n - -config PPC_UDBG_BEAT - bool "BEAT based debug console" - depends on PPC_CELLEB - default n - -config XICS - depends on PPC_PSERIES - bool - default y - -config U3_DART - bool - depends on PPC_MULTIPLATFORM && PPC64 - default n - -config PPC_RTAS - bool - default n - -config RTAS_ERROR_LOGGING - bool - depends on PPC_RTAS - default n - -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on PPC64 && RTAS_PROC - -config PPC_PMI - tristate "Support for PMI" - depends PPC_IBM_CELL_BLADE - help - PMI (Platform Management Interrupt) is a way to - communicate with the BMC (Baseboard Mangement Controller). - It is used in some IBM Cell blades. - default m - -config MMIO_NVRAM - bool - default n - -config MPIC_BROKEN_U3 - bool - depends on PPC_MAPLE - default y - -config IBMVIO - depends on PPC_PSERIES || PPC_ISERIES - bool - default y - -config IBMEBUS - depends on PPC_PSERIES - bool "Support for GX bus based adapters" - help - Bus device driver for GX bus based adapters. - -config PPC_MPC106 - bool - default n - -config PPC_970_NAP - bool - default n - -config PPC_INDIRECT_IO - bool - select GENERIC_IOMAP - default n - -config GENERIC_IOMAP - bool - default n - -source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_PMAC - bool "Support for Apple PowerBooks" - depends on CPU_FREQ && ADB_PMU && PPC32 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple PowerBooks, - this currently includes some models of iBook & Titanium - PowerBook. - -config CPU_FREQ_PMAC64 - bool "Support for some Apple G5s" - depends on CPU_FREQ && PPC64 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple iMac G5, - and some of the more recent desktop G5 machines as well. - -config PPC601_SYNC_FIX - bool "Workarounds for PPC601 bugs" - depends on 6xx && (PPC_PREP || PPC_PMAC) - help - Some versions of the PPC601 (the first PowerPC chip) have bugs which - mean that extra synchronization instructions are required near - certain instructions, typically those that make major changes to the - CPU state. These extra instructions reduce performance slightly. - If you say N here, these extra instructions will not be included, - resulting in a kernel which will run faster but may not run at all - on some systems with the PPC601 chip. - - If in doubt, say Y here. - -config TAU - bool "On-chip CPU temperature sensor support" - depends on 6xx - help - G3 and G4 processors have an on-chip temperature sensor called the - 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die - temperature within 2-4 degrees Celsius. This option shows the current - on-die temperature in /proc/cpuinfo if the cpu supports it. - - Unfortunately, on some chip revisions, this sensor is very inaccurate - and in many cases, does not work at all, so don't assume the cpu - temp is actually what /proc/cpuinfo says it is. - -config TAU_INT - bool "Interrupt driven TAU driver (DANGEROUS)" - depends on TAU - ---help--- - The TAU supports an interrupt driven mode which causes an interrupt - whenever the temperature goes out of range. This is the fastest way - to get notified the temp has exceeded a range. With this option off, - a timer is used to re-check the temperature periodically. - - However, on some cpus it appears that the TAU interrupt hardware - is buggy and can cause a situation which would lead unexplained hard - lockups. - - Unless you are extending the TAU driver, or enjoy kernel/hardware - debugging, leave this option off. - -config TAU_AVERAGE - bool "Average high and low temp" - depends on TAU - ---help--- - The TAU hardware can compare the temperature to an upper and lower - bound. The default behavior is to show both the upper and lower - bound in /proc/cpuinfo. If the range is large, the temperature is - either changing a lot, or the TAU hardware is broken (likely on some - G4's). If the range is small (around 4 degrees), the temperature is - relatively stable. If you say Y here, a single temperature value, - halfway between the upper and lower bounds, will be reported in - /proc/cpuinfo. - - If in doubt, say N here. - -endmenu +source "arch/powerpc/platforms/Kconfig" source arch/powerpc/platforms/embedded6xx/Kconfig source arch/powerpc/platforms/4xx/Kconfig diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig new file mode 100644 index 0000000000..388a1bdd28 --- /dev/null +++ b/arch/powerpc/platforms/Kconfig @@ -0,0 +1,219 @@ +menu "Platform support" + depends on PPC64 || CLASSIC32 + +choice + prompt "Machine type" + default PPC_MULTIPLATFORM + +config PPC_MULTIPLATFORM + bool "Generic desktop/server/laptop" + help + Select this option if configuring for an IBM pSeries or + RS/6000 machine, an Apple machine, or a PReP, CHRP, + Maple or Cell-based machine. + +config EMBEDDED6xx + bool "Embedded 6xx/7xx/7xxx-based board" + depends on PPC32 && (BROKEN||BROKEN_ON_SMP) + +config APUS + bool "Amiga-APUS" + depends on PPC32 && BROKEN + help + Select APUS if configuring for a PowerUP Amiga. + More information is available at: + . +endchoice + +config QUICC_ENGINE + bool + depends on PPC_MPC836x || PPC_MPC832x + default y + help + The QUICC Engine (QE) is a new generation of communications + coprocessors on Freescale embedded CPUs (akin to CPM in older chips). + Selecting this option means that you wish to build a kernel + for a machine with a QE coprocessor. + +source "arch/powerpc/platforms/pseries/Kconfig" +source "arch/powerpc/platforms/iseries/Kconfig" +source "arch/powerpc/platforms/chrp/Kconfig" +source "arch/powerpc/platforms/52xx/Kconfig" +source "arch/powerpc/platforms/powermac/Kconfig" +source "arch/powerpc/platforms/prep/Kconfig" +source "arch/powerpc/platforms/maple/Kconfig" +source "arch/powerpc/platforms/pasemi/Kconfig" +source arch/powerpc/platforms/celleb/Kconfig +source arch/powerpc/platforms/ps3/Kconfig +source arch/powerpc/platforms/cell/Kconfig + +config PPC_NATIVE + bool + depends on PPC_MULTIPLATFORM + help + Support for running natively on the hardware, i.e. without + a hypervisor. This option is not user-selectable but should + be selected by all platforms that need it. + +config UDBG_RTAS_CONSOLE + bool "RTAS based debug console" + depends on PPC_RTAS + default n + +config PPC_UDBG_BEAT + bool "BEAT based debug console" + depends on PPC_CELLEB + default n + +config XICS + depends on PPC_PSERIES + bool + default y + +config U3_DART + bool + depends on PPC_MULTIPLATFORM && PPC64 + default n + +config PPC_RTAS + bool + default n + +config RTAS_ERROR_LOGGING + bool + depends on PPC_RTAS + default n + +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config PPC_PMI + tristate "Support for PMI" + depends PPC_IBM_CELL_BLADE + help + PMI (Platform Management Interrupt) is a way to + communicate with the BMC (Baseboard Mangement Controller). + It is used in some IBM Cell blades. + default m + +config MMIO_NVRAM + bool + default n + +config MPIC_BROKEN_U3 + bool + depends on PPC_MAPLE + default y + +config IBMVIO + depends on PPC_PSERIES || PPC_ISERIES + bool + default y + +config IBMEBUS + depends on PPC_PSERIES + bool "Support for GX bus based adapters" + help + Bus device driver for GX bus based adapters. + +config PPC_MPC106 + bool + default n + +config PPC_970_NAP + bool + default n + +config PPC_INDIRECT_IO + bool + select GENERIC_IOMAP + default n + +config GENERIC_IOMAP + bool + default n + +source "drivers/cpufreq/Kconfig" + +config CPU_FREQ_PMAC + bool "Support for Apple PowerBooks" + depends on CPU_FREQ && ADB_PMU && PPC32 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple PowerBooks, + this currently includes some models of iBook & Titanium + PowerBook. + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on CPU_FREQ && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + +config PPC601_SYNC_FIX + bool "Workarounds for PPC601 bugs" + depends on 6xx && (PPC_PREP || PPC_PMAC) + help + Some versions of the PPC601 (the first PowerPC chip) have bugs which + mean that extra synchronization instructions are required near + certain instructions, typically those that make major changes to the + CPU state. These extra instructions reduce performance slightly. + If you say N here, these extra instructions will not be included, + resulting in a kernel which will run faster but may not run at all + on some systems with the PPC601 chip. + + If in doubt, say Y here. + +config TAU + bool "On-chip CPU temperature sensor support" + depends on 6xx + help + G3 and G4 processors have an on-chip temperature sensor called the + 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die + temperature within 2-4 degrees Celsius. This option shows the current + on-die temperature in /proc/cpuinfo if the cpu supports it. + + Unfortunately, on some chip revisions, this sensor is very inaccurate + and in many cases, does not work at all, so don't assume the cpu + temp is actually what /proc/cpuinfo says it is. + +config TAU_INT + bool "Interrupt driven TAU driver (DANGEROUS)" + depends on TAU + ---help--- + The TAU supports an interrupt driven mode which causes an interrupt + whenever the temperature goes out of range. This is the fastest way + to get notified the temp has exceeded a range. With this option off, + a timer is used to re-check the temperature periodically. + + However, on some cpus it appears that the TAU interrupt hardware + is buggy and can cause a situation which would lead unexplained hard + lockups. + + Unless you are extending the TAU driver, or enjoy kernel/hardware + debugging, leave this option off. + +config TAU_AVERAGE + bool "Average high and low temp" + depends on TAU + ---help--- + The TAU hardware can compare the temperature to an upper and lower + bound. The default behavior is to show both the upper and lower + bound in /proc/cpuinfo. If the range is large, the temperature is + either changing a lot, or the TAU hardware is broken (likely on some + G4's). If the range is small (around 4 degrees), the temperature is + relatively stable. If you say Y here, a single temperature value, + halfway between the upper and lower bounds, will be reported in + /proc/cpuinfo. + + If in doubt, say N here. + +endmenu -- 2.39.5