From 4326ed0be93574dac5b5e475713015159108bd88 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 30 Jul 2007 17:08:43 -0400 Subject: [PATCH] USB: address-0 handling during device initialization This patch (as947) changes the device initialization and enumeration code in hub.c; now udev->devnum will be set to 0 while the device is being accessed at address 0. Until now this wasn't needed because the address value was passed as part of urb->pipe; without that field the device address must be stored elsewhere. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 21 +++++++++++++-------- drivers/usb/core/urb.c | 4 +--- 2 files changed, 14 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c8a01f66df..34be27a6cb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1481,6 +1481,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, case 0: /* TRSTRCY = 10 ms; plus some extra */ msleep(10 + 40); + udev->devnum = 0; /* Device now at address 0 */ /* FALL THROUGH */ case -ENOTCONN: case -ENODEV: @@ -2005,20 +2006,21 @@ static void ep0_reinit(struct usb_device *udev) #define usb_sndaddr0pipe() (PIPE_CONTROL << 30) #define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN) -static int hub_set_address(struct usb_device *udev) +static int hub_set_address(struct usb_device *udev, int devnum) { int retval; - if (udev->devnum == 0) + if (devnum <= 1) return -EINVAL; if (udev->state == USB_STATE_ADDRESS) return 0; if (udev->state != USB_STATE_DEFAULT) return -EINVAL; retval = usb_control_msg(udev, usb_sndaddr0pipe(), - USB_REQ_SET_ADDRESS, 0, udev->devnum, 0, + USB_REQ_SET_ADDRESS, 0, devnum, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); if (retval == 0) { + udev->devnum = devnum; /* Device now using proper address */ usb_set_device_state(udev, USB_STATE_ADDRESS); ep0_reinit(udev); } @@ -2045,6 +2047,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; char *speed, *type; + int devnum = udev->devnum; /* root hub ports have a slightly longer reset period * (from USB 2.0 spec, section 7.1.7.5) @@ -2074,7 +2077,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, goto fail; } oldspeed = udev->speed; - + /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ... * it's fixed size except for full speed devices. * For Wireless USB devices, ep0 max packet is always 512 (tho @@ -2115,7 +2118,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, dev_info (&udev->dev, "%s %s speed %sUSB device using %s and address %d\n", (udev->config) ? "reset" : "new", speed, type, - udev->bus->controller->driver->name, udev->devnum); + udev->bus->controller->driver->name, devnum); /* Set up TT records, if needed */ if (hdev->tt) { @@ -2202,7 +2205,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, } for (j = 0; j < SET_ADDRESS_TRIES; ++j) { - retval = hub_set_address(udev); + retval = hub_set_address(udev, devnum); if (retval >= 0) break; msleep(200); @@ -2210,7 +2213,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval < 0) { dev_err(&udev->dev, "device not accepting address %d, error %d\n", - udev->devnum, retval); + devnum, retval); goto fail; } @@ -2263,8 +2266,10 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, retval = 0; fail: - if (retval) + if (retval) { hub_port_disable(hub, port1, 0); + udev->devnum = devnum; /* for disconnect processing */ + } mutex_unlock(&usb_address0_mutex); return retval; } diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 1a64a6a850..1acca8696b 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -284,9 +284,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) if (!urb || urb->hcpriv || !urb->complete) return -EINVAL; - if (!(dev = urb->dev) || - (dev->state < USB_STATE_DEFAULT) || - (!dev->bus) || (dev->devnum <= 0)) + if (!(dev = urb->dev) || dev->state < USB_STATE_DEFAULT) return -ENODEV; if (dev->bus->controller->power.power_state.event != PM_EVENT_ON || dev->state == USB_STATE_SUSPENDED) -- 2.39.5