From 409ba47c297fd13849909adea63f183f55d52418 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 5 Feb 2007 19:45:38 +0300 Subject: [PATCH] (2.6.20) pata_oldpiix: fix PIO2 underclocking Fix the PIO mode 2 using mode 0 timings -- this driver should enable the fast timing bank starting with PIO2, just like the ata_piix driver does. Also, fix/rephrase some comments while at it. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_oldpiix.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index b76d2b4666..45215aa05e 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_oldpiix" -#define DRV_VERSION "0.5.2" +#define DRV_VERSION "0.5.3" /** * oldpiix_pre_reset - probe begin @@ -94,19 +94,21 @@ static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; - if (pio > 2) - control |= 1; /* TIME1 enable */ + if (pio > 1) + control |= 1; /* TIME */ if (ata_pio_need_iordy(adev)) - control |= 2; /* IE IORDY */ + control |= 2; /* IE */ - /* Intel specifies that the PPE functionality is for disk only */ + /* Intel specifies that the prefetch/posting is for disk only */ if (adev->class == ATA_DEV_ATA) - control |= 4; /* PPE enable */ + control |= 4; /* PPE */ pci_read_config_word(dev, idetm_port, &idetm_data); - /* Enable PPE, IE and TIME as appropriate. Clear the other - drive timing bits */ + /* + * Set PPE, IE and TIME as appropriate. + * Clear the other drive's timing bits. + */ if (adev->devno == 0) { idetm_data &= 0xCCE0; idetm_data |= control; -- 2.39.5