From 3e152505a57db6622deb1322c22551c046e33d16 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 14 Dec 2007 14:08:35 -0800 Subject: [PATCH] USB: pl2303: Move pl2303 vendor specific init to probe function. Without this fix, the pl2303 usb-serial adapter would not suspend properly unless it had been opened first. A pl2303 type_1 chip will still break if the system is hibernated while the RS-232 connector is powered by another system. This was broken before, and a reset resume does not fix it. All other suspend and autosuspend scenarios work with ATEN pl2303 adaptors with HX and type_1 chips. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 49 ++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 25 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index fd8c09fd32..c27f2f822f 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -338,8 +338,13 @@ static int pl2303_startup(struct usb_serial *serial) { struct pl2303_private *priv; enum pl2303_type type = type_0; + unsigned char *buf; int i; + buf = kmalloc(10, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + if (serial->dev->descriptor.bDeviceClass == 0x02) type = type_0; else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) @@ -364,9 +369,27 @@ static int pl2303_startup(struct usb_serial *serial) priv->type = type; usb_set_serial_port_data(serial->port[i], priv); } + + pl2303_vendor_read(0x8484, 0, serial, buf); + pl2303_vendor_write(0x0404, 0, serial); + pl2303_vendor_read(0x8484, 0, serial, buf); + pl2303_vendor_read(0x8383, 0, serial, buf); + pl2303_vendor_read(0x8484, 0, serial, buf); + pl2303_vendor_write(0x0404, 1, serial); + pl2303_vendor_read(0x8484, 0, serial, buf); + pl2303_vendor_read(0x8383, 0, serial, buf); + pl2303_vendor_write(0, 1, serial); + pl2303_vendor_write(1, 0, serial); + if (type == HX) + pl2303_vendor_write(2, 0x44, serial); + else + pl2303_vendor_write(2, 0x24, serial); + + kfree(buf); return 0; cleanup: + kfree(buf); for (--i; i>=0; --i) { priv = usb_get_serial_port_data(serial->port[i]); pl2303_buf_free(priv->buf); @@ -690,7 +713,6 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp) struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct pl2303_private *priv = usb_get_serial_port_data(port); - unsigned char *buf; int result; dbg("%s - port %d", __FUNCTION__, port->number); @@ -698,35 +720,12 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp) if (priv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); - } - - buf = kmalloc(10, GFP_KERNEL); - if (buf==NULL) - return -ENOMEM; - - pl2303_vendor_read(0x8484, 0, serial, buf); - pl2303_vendor_write(0x0404, 0, serial); - pl2303_vendor_read(0x8484, 0, serial, buf); - pl2303_vendor_read(0x8383, 0, serial, buf); - pl2303_vendor_read(0x8484, 0, serial, buf); - pl2303_vendor_write(0x0404, 1, serial); - pl2303_vendor_read(0x8484, 0, serial, buf); - pl2303_vendor_read(0x8383, 0, serial, buf); - pl2303_vendor_write(0, 1, serial); - pl2303_vendor_write(1, 0, serial); - - if (priv->type == HX) { - /* HX chip */ - pl2303_vendor_write(2, 0x44, serial); + } else { /* reset upstream data pipes */ pl2303_vendor_write(8, 0, serial); pl2303_vendor_write(9, 0, serial); - } else { - pl2303_vendor_write(2, 0x24, serial); } - kfree(buf); - /* Setup termios */ if (port->tty) { pl2303_set_termios(port, &tmp_termios); -- 2.39.5