From 37fa24212e68e11aee54d4c0d0becb8fc63555c6 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Thu, 24 Apr 2008 05:19:02 +0800 Subject: [PATCH] [Blackfin] arch: Allow AD1836A board to be connected, either to SPORT2 or SPORT3. Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/boards/ezkit.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index acbfb0fc02..073bfdd56a 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -403,6 +403,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .cs_change_per_word = 0, @@ -446,6 +454,16 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", -- 2.39.5