From 31b619c5abaa5512e7b41f190f9b7903b902f29a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 27 Jun 2005 11:33:11 -0700 Subject: [PATCH] [PATCH] skge: cleanup ethtool mode support Unify mapping of supported modes based on hardware. Signed-off-by: Stephen Hemminger --- drivers/net/skge.c | 125 +++++++++++++++++++++++---------------------- 1 file changed, 65 insertions(+), 60 deletions(-) diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 68de7f748a..81b8fe9581 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -179,6 +179,36 @@ static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) return 0; } +/* Determine supported/adverised modes based on hardware. + * Note: ethtoool ADVERTISED_xxx == SUPPORTED_xxx + */ +static u32 skge_supported_modes(const struct skge_hw *hw) +{ + u32 supported; + + if (iscopper(hw)) { + supported = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg| SUPPORTED_TP; + + if (hw->chip_id == CHIP_ID_GENESIS) + supported &= ~(SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full); + + else if (hw->chip_id == CHIP_ID_YUKON) + supported &= ~SUPPORTED_1000baseT_Half; + } else + supported = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE + | SUPPORTED_Autoneg; + + return supported; +} static int skge_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) @@ -187,35 +217,13 @@ static int skge_get_settings(struct net_device *dev, struct skge_hw *hw = skge->hw; ecmd->transceiver = XCVR_INTERNAL; + ecmd->supported = skge_supported_modes(hw); if (iscopper(hw)) { - if (hw->chip_id == CHIP_ID_GENESIS) - ecmd->supported = SUPPORTED_1000baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_Autoneg | SUPPORTED_TP; - else { - ecmd->supported = SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full - | SUPPORTED_Autoneg| SUPPORTED_TP; - - if (hw->chip_id == CHIP_ID_YUKON) - ecmd->supported &= ~SUPPORTED_1000baseT_Half; - - } - ecmd->port = PORT_TP; ecmd->phy_address = hw->phy_addr; - } else { - ecmd->supported = SUPPORTED_1000baseT_Full - | SUPPORTED_FIBRE - | SUPPORTED_Autoneg; - + } else ecmd->port = PORT_FIBRE; - } ecmd->advertising = skge->advertising; ecmd->autoneg = skge->autoneg; @@ -224,60 +232,57 @@ static int skge_get_settings(struct net_device *dev, return 0; } -static u32 skge_modes(const struct skge_hw *hw) -{ - u32 modes = ADVERTISED_Autoneg - | ADVERTISED_1000baseT_Full | ADVERTISED_1000baseT_Half - | ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half - | ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half; - - if (iscopper(hw)) { - modes |= ADVERTISED_TP; - switch (hw->chip_id) { - case CHIP_ID_GENESIS: - modes &= ~(ADVERTISED_100baseT_Full - | ADVERTISED_100baseT_Half - | ADVERTISED_10baseT_Full - | ADVERTISED_10baseT_Half); - break; - - case CHIP_ID_YUKON: - modes &= ~ADVERTISED_1000baseT_Half; - break; - - } - } else { - modes |= ADVERTISED_FIBRE; - modes &= ~ADVERTISED_1000baseT_Half; - } - return modes; -} - static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { struct skge_port *skge = netdev_priv(dev); const struct skge_hw *hw = skge->hw; + u32 supported = skge_supported_modes(hw); if (ecmd->autoneg == AUTONEG_ENABLE) { - if (ecmd->advertising & skge_modes(hw)) - return -EINVAL; + ecmd->advertising = supported; + skge->duplex = -1; + skge->speed = -1; } else { - switch (ecmd->speed) { + u32 setting; + + switch(ecmd->speed) { case SPEED_1000: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_1000baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_1000baseT_Half; + else + return -EINVAL; break; case SPEED_100: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_100baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_100baseT_Half; + else + return -EINVAL; + break; + case SPEED_10: - if (iscopper(hw) || hw->chip_id == CHIP_ID_GENESIS) + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_10baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_10baseT_Half; + else return -EINVAL; break; default: return -EINVAL; } + + if ((setting & supported) == 0) + return -EINVAL; + + skge->speed = ecmd->speed; + skge->duplex = ecmd->duplex; } skge->autoneg = ecmd->autoneg; - skge->speed = ecmd->speed; - skge->duplex = ecmd->duplex; skge->advertising = ecmd->advertising; if (netif_running(dev)) { @@ -2973,7 +2978,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, skge->flow_control = FLOW_MODE_SYMMETRIC; skge->duplex = -1; skge->speed = -1; - skge->advertising = skge_modes(hw); + skge->advertising = skge_supported_modes(hw); hw->dev[port] = dev; -- 2.39.5