From 2ac5ee4738cbd9c146ccda53f02006eaf6a43352 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 21 May 2007 18:09:39 +0800 Subject: [PATCH] Blackfin serial driver: implement support for ignoring parity/break errors properly setting up and respecting the read_status_mask / ignore_status_mask fields of the serial core Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 97 ++++++++++++++++++++++++--------------- 1 file changed, 61 insertions(+), 36 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index a8271d9c62..787dc7168f 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -6,8 +6,6 @@ * Created: * Description: Driver for blackfin 5xx serial ports * - * Rev: $Id: bfin_5xx.c,v 1.19 2006/09/24 02:33:53 aubrey Exp $ - * * Modified: * Copyright 2006 Analog Devices Inc. * @@ -152,7 +150,7 @@ static void local_put_char(struct bfin_serial_port *uart, char ch) static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { - struct tty_struct *tty = uart->port.info?uart->port.info->tty:0; + struct tty_struct *tty = uart->port.info->tty; unsigned int status, ch, flg; #ifdef BF533_FAMILY static int in_break = 0; @@ -173,8 +171,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) if (ch != 0) { in_break = 0; ch = UART_GET_CHAR(uart); - } - return; + if (bfin_revid() < 5) + return; + } else + return; } #endif @@ -185,27 +185,32 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; - flg = TTY_BREAK; - } else if (status & PE) { - flg = TTY_PARITY; + } + if (status & PE) uart->port.icount.parity++; - } else if (status & OE) { - flg = TTY_OVERRUN; + if (status & OE) uart->port.icount.overrun++; - } else if (status & FE) { - flg = TTY_FRAME; + if (status & FE) uart->port.icount.frame++; - } else + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else flg = TTY_NORMAL; if (uart_handle_sysrq_char(&uart->port, ch)) goto ignore_char; - if (tty) - uart_insert_char(&uart->port, status, 2, ch, flg); -ignore_char: - if (tty) - tty_flip_buffer_push(tty); + uart_insert_char(&uart->port, status, OE, ch, flg); + + ignore_char: + tty_flip_buffer_push(tty); } static void bfin_serial_tx_chars(struct bfin_serial_port *uart) @@ -254,7 +259,6 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; - unsigned short status; spin_lock(&uart->port.lock); while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY) @@ -325,7 +329,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) spin_unlock_irqrestore(&uart->port.lock, flags); } -static void bfin_serial_dma_rx_chars(struct bfin_serial_port * uart) +static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info->tty; int i, flg, status; @@ -337,25 +341,32 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port * uart) uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto dma_ignore_char; - flg = TTY_BREAK; - } else if (status & PE) { - flg = TTY_PARITY; + } + if (status & PE) uart->port.icount.parity++; - } else if (status & OE) { - flg = TTY_OVERRUN; + if (status & OE) uart->port.icount.overrun++; - } else if (status & FE) { - flg = TTY_FRAME; + if (status & FE) uart->port.icount.frame++; - } else + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else flg = TTY_NORMAL; for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) { if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) goto dma_ignore_char; - uart_insert_char(&uart->port, status, 2, uart->rx_dma_buf.buf[i], flg); + uart_insert_char(&uart->port, status, OE, uart->rx_dma_buf.buf[i], flg); } -dma_ignore_char: + + dma_ignore_char: tty_flip_buffer_push(tty); } @@ -620,13 +631,27 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, lcr |= EPS; } - /* These controls are not implemented for this port */ - termios->c_iflag |= INPCK | BRKINT | PARMRK; - termios->c_iflag &= ~(IGNPAR | IGNBRK); + port->read_status_mask = OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (FE | PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BI; - /* These controls are not implemented for this port */ - termios->c_iflag |= INPCK | BRKINT | PARMRK; - termios->c_iflag &= ~(IGNPAR | IGNBRK); + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= FE | PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= OE; + } baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); -- 2.39.5