From 27345bb684140f5f306963e0d6e25a60c7857dfe Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 26 Apr 2007 09:43:20 -0700 Subject: [PATCH] e100: Optionally use I/O mode only to access register space It appears that some systems still like e100 better if it uses I/O access mode. Setting the new parameter use_io=1 will cause all driver instances to use io mapping to access the register space on the e100 device. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 72 +++++++++++++++++++++++++--------------------- 1 file changed, 39 insertions(+), 33 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 135617c594..61696637a2 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -159,7 +159,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.17-k2"DRV_EXT +#define DRV_VERSION "3.5.17-k4"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -174,10 +174,13 @@ MODULE_VERSION(DRV_VERSION); static int debug = 3; static int eeprom_bad_csum_allow = 0; +static int use_io = 0; module_param(debug, int, 0); module_param(eeprom_bad_csum_allow, int, 0); +module_param(use_io, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums"); +MODULE_PARM_DESC(use_io, "Force use of i/o access mode"); #define DPRINTK(nlevel, klevel, fmt, args...) \ (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \ printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \ @@ -584,7 +587,7 @@ static inline void e100_write_flush(struct nic *nic) { /* Flush previous PCI writes through intermediate bridges * by doing a benign read */ - (void)readb(&nic->csr->scb.status); + (void)ioread8(&nic->csr->scb.status); } static void e100_enable_irq(struct nic *nic) @@ -592,7 +595,7 @@ static void e100_enable_irq(struct nic *nic) unsigned long flags; spin_lock_irqsave(&nic->cmd_lock, flags); - writeb(irq_mask_none, &nic->csr->scb.cmd_hi); + iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi); e100_write_flush(nic); spin_unlock_irqrestore(&nic->cmd_lock, flags); } @@ -602,7 +605,7 @@ static void e100_disable_irq(struct nic *nic) unsigned long flags; spin_lock_irqsave(&nic->cmd_lock, flags); - writeb(irq_mask_all, &nic->csr->scb.cmd_hi); + iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi); e100_write_flush(nic); spin_unlock_irqrestore(&nic->cmd_lock, flags); } @@ -611,11 +614,11 @@ static void e100_hw_reset(struct nic *nic) { /* Put CU and RU into idle with a selective reset to get * device off of PCI bus */ - writel(selective_reset, &nic->csr->port); + iowrite32(selective_reset, &nic->csr->port); e100_write_flush(nic); udelay(20); /* Now fully reset device */ - writel(software_reset, &nic->csr->port); + iowrite32(software_reset, &nic->csr->port); e100_write_flush(nic); udelay(20); /* Mask off our interrupt line - it's unmasked after reset */ @@ -632,7 +635,7 @@ static int e100_self_test(struct nic *nic) nic->mem->selftest.signature = 0; nic->mem->selftest.result = 0xFFFFFFFF; - writel(selftest | dma_addr, &nic->csr->port); + iowrite32(selftest | dma_addr, &nic->csr->port); e100_write_flush(nic); /* Wait 10 msec for self-test to complete */ msleep(10); @@ -670,23 +673,23 @@ static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, u16 data) for(j = 0; j < 3; j++) { /* Chip select */ - writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo); + iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo); e100_write_flush(nic); udelay(4); for(i = 31; i >= 0; i--) { ctrl = (cmd_addr_data[j] & (1 << i)) ? eecs | eedi : eecs; - writeb(ctrl, &nic->csr->eeprom_ctrl_lo); + iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo); e100_write_flush(nic); udelay(4); - writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo); + iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo); e100_write_flush(nic); udelay(4); } /* Wait 10 msec for cmd to complete */ msleep(10); /* Chip deselect */ - writeb(0, &nic->csr->eeprom_ctrl_lo); + iowrite8(0, &nic->csr->eeprom_ctrl_lo); e100_write_flush(nic); udelay(4); } }; @@ -702,21 +705,21 @@ static u16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr) cmd_addr_data = ((op_read << *addr_len) | addr) << 16; /* Chip select */ - writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo); + iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo); e100_write_flush(nic); udelay(4); /* Bit-bang to read word from eeprom */ for(i = 31; i >= 0; i--) { ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs; - writeb(ctrl, &nic->csr->eeprom_ctrl_lo); + iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo); e100_write_flush(nic); udelay(4); - writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo); + iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo); e100_write_flush(nic); udelay(4); /* Eeprom drives a dummy zero to EEDO after receiving * complete address. Use this to adjust addr_len. */ - ctrl = readb(&nic->csr->eeprom_ctrl_lo); + ctrl = ioread8(&nic->csr->eeprom_ctrl_lo); if(!(ctrl & eedo) && i > 16) { *addr_len -= (i - 16); i = 17; @@ -726,7 +729,7 @@ static u16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr) } /* Chip deselect */ - writeb(0, &nic->csr->eeprom_ctrl_lo); + iowrite8(0, &nic->csr->eeprom_ctrl_lo); e100_write_flush(nic); udelay(4); return le16_to_cpu(data); @@ -797,7 +800,7 @@ static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) /* Previous command is accepted when SCB clears */ for(i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) { - if(likely(!readb(&nic->csr->scb.cmd_lo))) + if(likely(!ioread8(&nic->csr->scb.cmd_lo))) break; cpu_relax(); if(unlikely(i > E100_WAIT_SCB_FAST)) @@ -809,8 +812,8 @@ static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) } if(unlikely(cmd != cuc_resume)) - writel(dma_addr, &nic->csr->scb.gen_ptr); - writeb(cmd, &nic->csr->scb.cmd_lo); + iowrite32(dma_addr, &nic->csr->scb.gen_ptr); + iowrite8(cmd, &nic->csr->scb.cmd_lo); err_unlock: spin_unlock_irqrestore(&nic->cmd_lock, flags); @@ -888,7 +891,7 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) */ spin_lock_irqsave(&nic->mdio_lock, flags); for (i = 100; i; --i) { - if (readl(&nic->csr->mdi_ctrl) & mdi_ready) + if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready) break; udelay(20); } @@ -898,11 +901,11 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) spin_unlock_irqrestore(&nic->mdio_lock, flags); return 0; /* No way to indicate timeout error */ } - writel((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl); + iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl); for (i = 0; i < 100; i++) { udelay(20); - if ((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready) + if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready) break; } spin_unlock_irqrestore(&nic->mdio_lock, flags); @@ -1311,7 +1314,7 @@ static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb, } /* ack any interupts, something could have been set */ - writeb(~0, &nic->csr->scb.stat_ack); + iowrite8(~0, &nic->csr->scb.stat_ack); /* if the command failed, or is not OK, notify and return */ if (!counter || !(cb->status & cpu_to_le16(cb_ok))) { @@ -1573,7 +1576,7 @@ static void e100_watchdog(unsigned long data) * accidentally, due to hardware that shares a register between the * interrupt mask bit and the SW Interrupt generation bit */ spin_lock_irq(&nic->cmd_lock); - writeb(readb(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi); + iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi); e100_write_flush(nic); spin_unlock_irq(&nic->cmd_lock); @@ -1902,7 +1905,7 @@ static irqreturn_t e100_intr(int irq, void *dev_id) { struct net_device *netdev = dev_id; struct nic *nic = netdev_priv(netdev); - u8 stat_ack = readb(&nic->csr->scb.stat_ack); + u8 stat_ack = ioread8(&nic->csr->scb.stat_ack); DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack); @@ -1911,7 +1914,7 @@ static irqreturn_t e100_intr(int irq, void *dev_id) return IRQ_NONE; /* Ack interrupt(s) */ - writeb(stat_ack, &nic->csr->scb.stat_ack); + iowrite8(stat_ack, &nic->csr->scb.stat_ack); if(likely(netif_rx_schedule_prep(netdev))) { e100_disable_irq(nic); @@ -2053,7 +2056,7 @@ static void e100_tx_timeout_task(struct work_struct *work) struct net_device *netdev = nic->netdev; DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n", - readb(&nic->csr->scb.status)); + ioread8(&nic->csr->scb.status)); e100_down(netdev_priv(netdev)); e100_up(netdev_priv(netdev)); } @@ -2176,9 +2179,9 @@ static void e100_get_regs(struct net_device *netdev, int i; regs->version = (1 << 24) | nic->rev_id; - buff[0] = readb(&nic->csr->scb.cmd_hi) << 24 | - readb(&nic->csr->scb.cmd_lo) << 16 | - readw(&nic->csr->scb.status); + buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 | + ioread8(&nic->csr->scb.cmd_lo) << 16 | + ioread16(&nic->csr->scb.status); for(i = E100_PHY_REGS; i >= 0; i--) buff[1 + E100_PHY_REGS - i] = mdio_read(netdev, nic->mii.phy_id, i); @@ -2550,7 +2553,10 @@ static int __devinit e100_probe(struct pci_dev *pdev, SET_MODULE_OWNER(netdev); SET_NETDEV_DEV(netdev, &pdev->dev); - nic->csr = ioremap(pci_resource_start(pdev, 0), sizeof(struct csr)); + if (use_io) + DPRINTK(PROBE, INFO, "using i/o access mode\n"); + + nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr)); if(!nic->csr) { DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n"); err = -ENOMEM; @@ -2627,7 +2633,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, " "MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n", - (unsigned long long)pci_resource_start(pdev, 0), pdev->irq, + (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), pdev->irq, netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]); @@ -2636,7 +2642,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, err_out_free: e100_free(nic); err_out_iounmap: - iounmap(nic->csr); + pci_iounmap(pdev, nic->csr); err_out_free_res: pci_release_regions(pdev); err_out_disable_pdev: -- 2.39.5