From 250a269da4e2afe815aeef97c3b115fbda4440ac Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Sat, 21 Jul 2007 04:37:59 -0700 Subject: [PATCH] atmel_lcdfb: Fix STN LCD support Fixes STN LCD support for the atmel_lcdfb framebuffer driver. This patch is the result of a work from Jan Altenberg and has been tested on a Hitachi SP06Q002 on at91sam9261ek. It adds a Kconfig switch that enables the proper LCD in the board configuration file (STN or TFT). The switch is used in arch/arm/mach-at91/at91sam9261_devices.c & board-sam9261ek.c as an example. This patch includes the "Fix wrong line_length calculation" little one from Jan and Haavard (submitted earlier). AT91 platform informations are directly submitted trough the at91 maintainer, here : http://article.gmane.org/gmane.linux.kernel/543158 Signed-off-by: Nicolas Ferre Cc: "Antonino A. Daplas" Cc: Jan Altenberg Cc: Patrice Vilchez Cc: Andrew Victor Cc: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 10 ++++++ drivers/video/atmel_lcdfb.c | 62 ++++++++++++++++++++++++++++++++----- 2 files changed, 64 insertions(+), 8 deletions(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3c0ed933d1..2a237f09ee 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -849,6 +849,16 @@ config FB_INTSRAM Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want to let frame buffer in external SDRAM. +config FB_ATMEL_STN + bool "Use a STN display with AT91/AT32 LCD Controller" + depends on FB_ATMEL && MACH_AT91SAM9261EK + default n + help + Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD + Controller. Say N if you want to connect a TFT. + + If unsure, say N. + config FB_NVIDIA tristate "nVidia Framebuffer Support" depends on FB && PCI diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index e1d5bd0c98..69ec93ce43 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -79,6 +79,29 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = { .accel = FB_ACCEL_NONE, }; +static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2) +{ + unsigned long value; + + if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000())) + return xres; + + value = xres; + if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) { + /* STN display */ + if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) { + value *= 3; + } + if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4 + || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8 + && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL )) + value = DIV_ROUND_UP(value, 4); + else + value = DIV_ROUND_UP(value, 8); + } + + return value; +} static void atmel_lcdfb_update_dma(struct fb_info *info, struct fb_var_screeninfo *var) @@ -181,6 +204,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, var->xoffset = var->yoffset = 0; switch (var->bits_per_pixel) { + case 1: case 2: case 4: case 8: @@ -228,8 +252,10 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, static int atmel_lcdfb_set_par(struct fb_info *info) { struct atmel_lcdfb_info *sinfo = info->par; + unsigned long hozval_linesz; unsigned long value; unsigned long clk_value_khz; + unsigned long bits_per_line; dev_dbg(info->device, "%s:\n", __func__); dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n", @@ -241,12 +267,15 @@ static int atmel_lcdfb_set_par(struct fb_info *info) lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); - if (info->var.bits_per_pixel <= 8) + if (info->var.bits_per_pixel == 1) + info->fix.visual = FB_VISUAL_MONO01; + else if (info->var.bits_per_pixel <= 8) info->fix.visual = FB_VISUAL_PSEUDOCOLOR; else info->fix.visual = FB_VISUAL_TRUECOLOR; - info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8); + bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel; + info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8); /* Re-initialize the DMA engine... */ dev_dbg(info->device, " * update DMA engine\n"); @@ -262,18 +291,21 @@ static int atmel_lcdfb_set_par(struct fb_info *info) /* Set pixel clock */ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; - value = clk_value_khz / PICOS2KHZ(info->var.pixclock); - - if (clk_value_khz % PICOS2KHZ(info->var.pixclock)) - value++; + value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock)); value = (value / 2) - 1; + dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value); if (value <= 0) { dev_notice(info->device, "Bypassing pixel clock divider\n"); lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); - } else + } else { lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET); + info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1))); + dev_dbg(info->device, " updated pixclk: %lu KHz\n", + PICOS2KHZ(info->var.pixclock)); + } + /* Initialize control register 2 */ value = sinfo->default_lcdcon2; @@ -311,9 +343,14 @@ static int atmel_lcdfb_set_par(struct fb_info *info) dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value); lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value); + /* Horizontal value (aka line size) */ + hozval_linesz = compute_hozval(info->var.xres, + lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2)); + /* Display size */ - value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET; + value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET; value |= info->var.yres - 1; + dev_dbg(info->device, " * LCDFRMCFG = %08lx\n", value); lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value); /* FIFO Threshold: Use formula from data sheet */ @@ -421,6 +458,15 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red, ret = 0; } break; + + case FB_VISUAL_MONO01: + if (regno < 2) { + val = (regno == 0) ? 0x00 : 0x1F; + lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val); + ret = 0; + } + break; + } return ret; -- 2.39.5