From 249bdbbf0dbab5554a4bfe55639e324d4758da96 Mon Sep 17 00:00:00 2001 From: Ondrej Zajicek Date: Tue, 8 May 2007 00:39:24 -0700 Subject: [PATCH] s3fb: driver fixes This fixes broken fbcon on Virge VX in 24 bpp mode, and contains several other small updates. Signed-off-by: Ondrej Zajicek Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fb/s3fb.txt | 12 ++++++++---- drivers/video/s3fb.c | 21 ++++++++++----------- 2 files changed, 18 insertions(+), 15 deletions(-) diff --git a/Documentation/fb/s3fb.txt b/Documentation/fb/s3fb.txt index 8a04c0da0c..2c97770bdb 100644 --- a/Documentation/fb/s3fb.txt +++ b/Documentation/fb/s3fb.txt @@ -35,10 +35,12 @@ Supported Features * suspend/resume support * DPMS support -Text mode is supported even in higher resolutions, but there is limitation -to lower pixclocks (maximum between 50-60 MHz, depending on specific hardware). -This limitation is not enforced by driver. Text mode supports 8bit wide fonts -only (hardware limitation) and 16bit tall fonts (driver limitation). +Text mode is supported even in higher resolutions, but there is limitation to +lower pixclocks (maximum usually between 50-60 MHz, depending on specific +hardware, i get best results from plain S3 Trio32 card - about 75 MHz). This +limitation is not enforced by driver. Text mode supports 8bit wide fonts only +(hardware limitation) and 16bit tall fonts (driver limitation). Text mode +support is broken on S3 Trio64 V2/DX. There are two 4 bpp modes. First mode (selected if nonstd == 0) is mode with packed pixels, high nibble first. Second mode (selected if nonstd == 1) is mode @@ -73,6 +75,8 @@ Known bugs ========== * cursor disable in text mode doesn't work + * text mode broken on S3 Trio64 V2/DX + -- Ondrej Zajicek diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c index 2a8d7d3338..dfa717b5b6 100644 --- a/drivers/video/s3fb.c +++ b/drivers/video/s3fb.c @@ -65,7 +65,7 @@ static const struct svga_fb_format s3fb_formats[] = { static const struct svga_pll s3_pll = {3, 129, 3, 33, 0, 3, - 60000, 240000, 14318}; + 35000, 240000, 14318}; static const int s3_memsizes[] = {4096, 0, 3072, 8192, 2048, 6144, 1024, 512}; @@ -331,8 +331,13 @@ static void s3_set_pixclock(struct fb_info *info, u32 pixclock) { u16 m, n, r; u8 regval; + int rv; - svga_compute_pll(&s3_pll, 1000000000 / pixclock, &m, &n, &r, info->node); + rv = svga_compute_pll(&s3_pll, 1000000000 / pixclock, &m, &n, &r, info->node); + if (rv < 0) { + printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node); + return; + } /* Set VGA misc register */ regval = vga_r(NULL, VGA_MIS_R); @@ -710,7 +715,7 @@ static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, break; case 16: if (regno >= 16) - return -EINVAL; + return 0; if (fb->var.green.length == 5) ((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) | @@ -723,9 +728,9 @@ static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, case 24: case 32: if (regno >= 16) - return -EINVAL; + return 0; - ((u32*)fb->pseudo_palette)[regno] = ((transp & 0xFF00) << 16) | ((red & 0xFF00) << 8) | + ((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) | (green & 0xFF00) | ((blue & 0xFF00) >> 8); break; default: @@ -778,12 +783,6 @@ static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) unsigned int offset; - /* Validate the offsets */ - if ((var->xoffset + var->xres) > var->xres_virtual) - return -EINVAL; - if ((var->yoffset + var->yres) > var->yres_virtual) - return -EINVAL; - /* Calculate the offset */ if (var->bits_per_pixel == 0) { offset = (var->yoffset / 16) * (var->xres_virtual / 2) + (var->xoffset / 2); -- 2.39.5