From 23af60398af2f5033e2f53665538a09f498dbc03 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 6 Jul 2008 01:10:27 +0200 Subject: [PATCH] mmc: remove multiwrite capability Relax requirements on host controllers and only require that they do not report a transfer count than is larger than the actual one (i.e. a lower value is okay). This is how many other parts of the kernel behaves so upper layers should already be prepared to handle that scenario. This gives us a performance boost on MMC cards. Signed-off-by: Pierre Ossman --- drivers/mmc/card/block.c | 47 +++++++++++++++--------------------- drivers/mmc/host/at91_mci.c | 2 +- drivers/mmc/host/atmel-mci.c | 2 +- drivers/mmc/host/mmc_spi.c | 5 +--- drivers/mmc/host/mmci.c | 1 - drivers/mmc/host/omap.c | 2 +- drivers/mmc/host/tifm_sd.c | 2 +- drivers/mmc/host/wbsd.c | 2 +- include/linux/mmc/host.h | 11 ++++----- 9 files changed, 30 insertions(+), 44 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 4b0f8220f1..66e5a5487c 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -237,17 +237,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) if (brq.data.blocks > card->host->max_blk_count) brq.data.blocks = card->host->max_blk_count; - /* - * If the host doesn't support multiple block writes, force - * block writes to single block. SD cards are excepted from - * this rule as they support querying the number of - * successfully written sectors. - */ - if (rq_data_dir(req) != READ && - !(card->host->caps & MMC_CAP_MULTIWRITE) && - !mmc_card_sd(card)) - brq.data.blocks = 1; - if (brq.data.blocks > 1) { /* SPI multiblock writes terminate using a special * token, not a STOP_TRANSMISSION request. @@ -367,30 +356,32 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) * mark the known good sectors as ok. * * If the card is not SD, we can still ok written sectors - * if the controller can do proper error reporting. + * as reported by the controller (which might be less than + * the real number of written sectors, but never more). * * For reads we just fail the entire chunk as that should * be safe in all cases. */ - if (rq_data_dir(req) != READ && mmc_card_sd(card)) { - u32 blocks; - unsigned int bytes; - - blocks = mmc_sd_num_wr_blocks(card); - if (blocks != (u32)-1) { - if (card->csd.write_partial) - bytes = blocks << md->block_bits; - else - bytes = blocks << 9; + if (rq_data_dir(req) != READ) { + if (mmc_card_sd(card)) { + u32 blocks; + unsigned int bytes; + + blocks = mmc_sd_num_wr_blocks(card); + if (blocks != (u32)-1) { + if (card->csd.write_partial) + bytes = blocks << md->block_bits; + else + bytes = blocks << 9; + spin_lock_irq(&md->lock); + ret = __blk_end_request(req, 0, bytes); + spin_unlock_irq(&md->lock); + } + } else { spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, bytes); + ret = __blk_end_request(req, 0, brq.data.bytes_xfered); spin_unlock_irq(&md->lock); } - } else if (rq_data_dir(req) != READ && - (card->host->caps & MMC_CAP_MULTIWRITE)) { - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, brq.data.bytes_xfered); - spin_unlock_irq(&md->lock); } mmc_release_host(card->host); diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 16df235fcc..f15e206430 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -995,7 +995,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) mmc->f_min = 375000; mmc->f_max = 25000000; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ; + mmc->caps = MMC_CAP_SDIO_IRQ; mmc->max_blk_size = 4095; mmc->max_blk_count = mmc->max_req_size; diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 25d5324ab7..cce873c5a1 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -849,7 +849,7 @@ static int __init atmci_probe(struct platform_device *pdev) mmc->f_min = (host->bus_hz + 511) / 512; mmc->f_max = host->bus_hz / 2; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE; + mmc->caps |= MMC_CAP_4_BIT_DATA; mmc->max_hw_segs = 64; mmc->max_phys_segs = 64; diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 4e82f64a96..41cc63360e 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1252,10 +1252,7 @@ static int mmc_spi_probe(struct spi_device *spi) mmc->ops = &mmc_spi_ops; mmc->max_blk_size = MMC_SPI_BLOCKSIZE; - /* As long as we keep track of the number of successfully - * transmitted blocks, we're good for multiwrite. - */ - mmc->caps = MMC_CAP_SPI | MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_SPI; /* SPI doesn't need the lowspeed device identification thing for * MMC or SD cards, since it never comes up in open drain mode. diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index da5fecad74..696cf3647c 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -535,7 +535,6 @@ static int mmci_probe(struct amba_device *dev, void *id) mmc->f_min = (host->mclk + 511) / 512; mmc->f_max = min(host->mclk, fmax); mmc->ocr_avail = plat->ocr_mask; - mmc->caps = MMC_CAP_MULTIWRITE; /* * We can do SGIO diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 549517c356..dbc26eb6a8 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) host->slots[id] = slot; - mmc->caps = MMC_CAP_MULTIWRITE; + mmc->caps = 0; if (host->pdata->conf.wire4) mmc->caps |= MMC_CAP_4_BIT_DATA; diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index 1c14a186f0..13844843e8 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -973,7 +973,7 @@ static int tifm_sd_probe(struct tifm_dev *sock) mmc->ops = &tifm_sd_ops; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_4_BIT_DATA; mmc->f_min = 20000000 / 60; mmc->f_max = 24000000; diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index f7dcd8ec0d..adda379520 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -1219,7 +1219,7 @@ static int __devinit wbsd_alloc_mmc(struct device *dev) mmc->f_min = 375000; mmc->f_max = 24000000; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_4_BIT_DATA; spin_lock_init(&host->lock); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 753b7231b8..10a2080086 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -111,12 +111,11 @@ struct mmc_host { unsigned long caps; /* Host capabilities */ #define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */ -#define MMC_CAP_MULTIWRITE (1 << 1) /* Can accurately report bytes sent to card on error */ -#define MMC_CAP_MMC_HIGHSPEED (1 << 2) /* Can do MMC high-speed timing */ -#define MMC_CAP_SD_HIGHSPEED (1 << 3) /* Can do SD high-speed timing */ -#define MMC_CAP_SDIO_IRQ (1 << 4) /* Can signal pending SDIO IRQs */ -#define MMC_CAP_SPI (1 << 5) /* Talks only SPI protocols */ -#define MMC_CAP_NEEDS_POLL (1 << 6) /* Needs polling for card-detection */ +#define MMC_CAP_MMC_HIGHSPEED (1 << 1) /* Can do MMC high-speed timing */ +#define MMC_CAP_SD_HIGHSPEED (1 << 2) /* Can do SD high-speed timing */ +#define MMC_CAP_SDIO_IRQ (1 << 3) /* Can signal pending SDIO IRQs */ +#define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ +#define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ -- 2.39.5