From 1ea6dd3840e5a22924d78299fee018c82e425d80 Mon Sep 17 00:00:00 2001 From: David Hubbard Date: Sun, 24 Jun 2007 11:16:15 +0200 Subject: [PATCH] hwmon/w83627ehf: Convert to a platform driver Remove i2c-isa from the w83627ehf driver, and use a platform driver instead. Signed-off-by: David Hubbard Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- drivers/hwmon/Kconfig | 2 - drivers/hwmon/w83627ehf.c | 508 +++++++++++++++++++++----------------- 2 files changed, 286 insertions(+), 224 deletions(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index cedd4b7227..fe7962bada 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -618,8 +618,6 @@ config SENSORS_W83627HF config SENSORS_W83627EHF tristate "Winbond W83627EHF/DHG" - depends on I2C && EXPERIMENTAL - select I2C_ISA help If you say yes here you get support for the hardware monitoring functionality of the Winbond W83627EHF Super-I/O chip. diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index f4d850c715..2157c3424d 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -41,8 +41,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include @@ -50,25 +50,19 @@ #include #include "lm75.h" -/* The actual ISA address is read from Super-I/O configuration space */ -static unsigned short address; +enum kinds { w83627ehf, w83627dhg }; -/* - * Super-I/O constants and functions - */ +/* used to set data->name = w83627ehf_device_names[data->sio_kind] */ +static const char * w83627ehf_device_names[] = { + "w83627ehf", + "w83627dhg", +}; + +#define DRVNAME "w83627ehf" /* - * The three following globals are initialized in w83627ehf_find(), before - * the i2c-isa device is created. Otherwise, they could be stored in - * w83627ehf_data. This is ugly, but necessary, and when the driver is next - * updated to become a platform driver, the globals will disappear. + * Super-I/O constants and functions */ -static int REG; /* The register to read/write */ -static int VAL; /* The value to read/write */ -/* The w83627ehf/ehg have 10 voltage inputs, but the w83627dhg has 9. This - * value is also used in w83627ehf_detect() to export a device name in sysfs - * (e.g. w83627ehf or w83627dhg) */ -static int w83627ehf_num_in; #define W83627EHF_LD_HWM 0x0b @@ -83,38 +77,38 @@ static int w83627ehf_num_in; #define SIO_ID_MASK 0xFFF0 static inline void -superio_outb(int reg, int val) +superio_outb(int ioreg, int reg, int val) { - outb(reg, REG); - outb(val, VAL); + outb(reg, ioreg); + outb(val, ioreg + 1); } static inline int -superio_inb(int reg) +superio_inb(int ioreg, int reg) { - outb(reg, REG); - return inb(VAL); + outb(reg, ioreg); + return inb(ioreg + 1); } static inline void -superio_select(int ld) +superio_select(int ioreg, int ld) { - outb(SIO_REG_LDSEL, REG); - outb(ld, VAL); + outb(SIO_REG_LDSEL, ioreg); + outb(ld, ioreg + 1); } static inline void -superio_enter(void) +superio_enter(int ioreg) { - outb(0x87, REG); - outb(0x87, REG); + outb(0x87, ioreg); + outb(0x87, ioreg); } static inline void -superio_exit(void) +superio_exit(int ioreg) { - outb(0x02, REG); - outb(0x02, VAL); + outb(0x02, ioreg); + outb(0x02, ioreg + 1); } /* @@ -124,8 +118,8 @@ superio_exit(void) #define IOREGION_ALIGNMENT ~7 #define IOREGION_OFFSET 5 #define IOREGION_LENGTH 2 -#define ADDR_REG_OFFSET 5 -#define DATA_REG_OFFSET 6 +#define ADDR_REG_OFFSET 0 +#define DATA_REG_OFFSET 1 #define W83627EHF_REG_BANK 0x4E #define W83627EHF_REG_CONFIG 0x40 @@ -255,7 +249,9 @@ static inline u8 in_to_reg(u32 val, u8 nr) */ struct w83627ehf_data { - struct i2c_client client; + int addr; /* IO base of hw monitor block */ + const char *name; + struct class_device *class_dev; struct mutex lock; @@ -264,6 +260,7 @@ struct w83627ehf_data { unsigned long last_updated; /* In jiffies */ /* Register values */ + u8 in_num; /* number of in inputs we have */ u8 in[10]; /* Register value */ u8 in_max[10]; /* Register value */ u8 in_min[10]; /* Register value */ @@ -290,6 +287,11 @@ struct w83627ehf_data { u8 fan_stop_time[4]; }; +struct w83627ehf_sio_data { + int sioreg; + enum kinds kind; +}; + static inline int is_word_sized(u16 reg) { return (((reg & 0xff00) == 0x100 @@ -303,121 +305,117 @@ static inline int is_word_sized(u16 reg) nothing for registers which live in bank 0. For others, they respectively set the bank register to the correct value (before the register is accessed), and back to 0 (afterwards). */ -static inline void w83627ehf_set_bank(struct i2c_client *client, u16 reg) +static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg) { if (reg & 0xff00) { - outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET); - outb_p(reg >> 8, client->addr + DATA_REG_OFFSET); + outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET); + outb_p(reg >> 8, data->addr + DATA_REG_OFFSET); } } -static inline void w83627ehf_reset_bank(struct i2c_client *client, u16 reg) +static inline void w83627ehf_reset_bank(struct w83627ehf_data *data, u16 reg) { if (reg & 0xff00) { - outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET); - outb_p(0, client->addr + DATA_REG_OFFSET); + outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET); + outb_p(0, data->addr + DATA_REG_OFFSET); } } -static u16 w83627ehf_read_value(struct i2c_client *client, u16 reg) +static u16 w83627ehf_read_value(struct w83627ehf_data *data, u16 reg) { - struct w83627ehf_data *data = i2c_get_clientdata(client); int res, word_sized = is_word_sized(reg); mutex_lock(&data->lock); - w83627ehf_set_bank(client, reg); - outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET); - res = inb_p(client->addr + DATA_REG_OFFSET); + w83627ehf_set_bank(data, reg); + outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); + res = inb_p(data->addr + DATA_REG_OFFSET); if (word_sized) { outb_p((reg & 0xff) + 1, - client->addr + ADDR_REG_OFFSET); - res = (res << 8) + inb_p(client->addr + DATA_REG_OFFSET); + data->addr + ADDR_REG_OFFSET); + res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET); } - w83627ehf_reset_bank(client, reg); + w83627ehf_reset_bank(data, reg); mutex_unlock(&data->lock); return res; } -static int w83627ehf_write_value(struct i2c_client *client, u16 reg, u16 value) +static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg, u16 value) { - struct w83627ehf_data *data = i2c_get_clientdata(client); int word_sized = is_word_sized(reg); mutex_lock(&data->lock); - w83627ehf_set_bank(client, reg); - outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET); + w83627ehf_set_bank(data, reg); + outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); if (word_sized) { - outb_p(value >> 8, client->addr + DATA_REG_OFFSET); + outb_p(value >> 8, data->addr + DATA_REG_OFFSET); outb_p((reg & 0xff) + 1, - client->addr + ADDR_REG_OFFSET); + data->addr + ADDR_REG_OFFSET); } - outb_p(value & 0xff, client->addr + DATA_REG_OFFSET); - w83627ehf_reset_bank(client, reg); + outb_p(value & 0xff, data->addr + DATA_REG_OFFSET); + w83627ehf_reset_bank(data, reg); mutex_unlock(&data->lock); return 0; } /* This function assumes that the caller holds data->update_lock */ -static void w83627ehf_write_fan_div(struct i2c_client *client, int nr) +static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr) { - struct w83627ehf_data *data = i2c_get_clientdata(client); u8 reg; switch (nr) { case 0: - reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf) + reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0xcf) | ((data->fan_div[0] & 0x03) << 4); /* fan5 input control bit is write only, compute the value */ reg |= (data->has_fan & (1 << 4)) ? 1 : 0; - w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg); - reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf) + w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg); + reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xdf) | ((data->fan_div[0] & 0x04) << 3); - w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg); + w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); break; case 1: - reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f) + reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0x3f) | ((data->fan_div[1] & 0x03) << 6); /* fan5 input control bit is write only, compute the value */ reg |= (data->has_fan & (1 << 4)) ? 1 : 0; - w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg); - reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf) + w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg); + reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xbf) | ((data->fan_div[1] & 0x04) << 4); - w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg); + w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); break; case 2: - reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV2) & 0x3f) + reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV2) & 0x3f) | ((data->fan_div[2] & 0x03) << 6); - w83627ehf_write_value(client, W83627EHF_REG_FANDIV2, reg); - reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0x7f) + w83627ehf_write_value(data, W83627EHF_REG_FANDIV2, reg); + reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0x7f) | ((data->fan_div[2] & 0x04) << 5); - w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg); + w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg); break; case 3: - reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0xfc) + reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0xfc) | (data->fan_div[3] & 0x03); - w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg); - reg = (w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT) & 0x7f) + w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg); + reg = (w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT) & 0x7f) | ((data->fan_div[3] & 0x04) << 5); - w83627ehf_write_value(client, W83627EHF_REG_SMI_OVT, reg); + w83627ehf_write_value(data, W83627EHF_REG_SMI_OVT, reg); break; case 4: - reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0x73) + reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0x73) | ((data->fan_div[4] & 0x03) << 2) | ((data->fan_div[4] & 0x04) << 5); - w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg); + w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg); break; } } static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); - struct w83627ehf_data *data = i2c_get_clientdata(client); + struct w83627ehf_data *data = dev_get_drvdata(dev); int pwmcfg = 0, tolerance = 0; /* shut up the compiler */ int i; @@ -426,33 +424,33 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { /* Fan clock dividers */ - i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1); + i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); data->fan_div[0] = (i >> 4) & 0x03; data->fan_div[1] = (i >> 6) & 0x03; - i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV2); + i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2); data->fan_div[2] = (i >> 6) & 0x03; - i = w83627ehf_read_value(client, W83627EHF_REG_VBAT); + i = w83627ehf_read_value(data, W83627EHF_REG_VBAT); data->fan_div[0] |= (i >> 3) & 0x04; data->fan_div[1] |= (i >> 4) & 0x04; data->fan_div[2] |= (i >> 5) & 0x04; if (data->has_fan & ((1 << 3) | (1 << 4))) { - i = w83627ehf_read_value(client, W83627EHF_REG_DIODE); + i = w83627ehf_read_value(data, W83627EHF_REG_DIODE); data->fan_div[3] = i & 0x03; data->fan_div[4] = ((i >> 2) & 0x03) | ((i >> 5) & 0x04); } if (data->has_fan & (1 << 3)) { - i = w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT); + i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT); data->fan_div[3] |= (i >> 5) & 0x04; } /* Measured voltages and limits */ - for (i = 0; i < w83627ehf_num_in; i++) { - data->in[i] = w83627ehf_read_value(client, + for (i = 0; i < data->in_num; i++) { + data->in[i] = w83627ehf_read_value(data, W83627EHF_REG_IN(i)); - data->in_min[i] = w83627ehf_read_value(client, + data->in_min[i] = w83627ehf_read_value(data, W83627EHF_REG_IN_MIN(i)); - data->in_max[i] = w83627ehf_read_value(client, + data->in_max[i] = w83627ehf_read_value(data, W83627EHF_REG_IN_MAX(i)); } @@ -461,9 +459,9 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) if (!(data->has_fan & (1 << i))) continue; - data->fan[i] = w83627ehf_read_value(client, + data->fan[i] = w83627ehf_read_value(data, W83627EHF_REG_FAN[i]); - data->fan_min[i] = w83627ehf_read_value(client, + data->fan_min[i] = w83627ehf_read_value(data, W83627EHF_REG_FAN_MIN[i]); /* If we failed to measure the fan speed and clock @@ -471,16 +469,16 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) time */ if (data->fan[i] == 0xff && data->fan_div[i] < 0x07) { - dev_dbg(&client->dev, "Increasing fan%d " + dev_dbg(dev, "Increasing fan%d " "clock divider from %u to %u\n", i + 1, div_from_reg(data->fan_div[i]), div_from_reg(data->fan_div[i] + 1)); data->fan_div[i]++; - w83627ehf_write_fan_div(client, i); + w83627ehf_write_fan_div(data, i); /* Preserve min limit if possible */ if (data->fan_min[i] >= 2 && data->fan_min[i] != 255) - w83627ehf_write_value(client, + w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[i], (data->fan_min[i] /= 2)); } @@ -489,9 +487,9 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) for (i = 0; i < 4; i++) { /* pwmcfg, tolarance mapped for i=0, i=1 to same reg */ if (i != 1) { - pwmcfg = w83627ehf_read_value(client, + pwmcfg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[i]); - tolerance = w83627ehf_read_value(client, + tolerance = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[i]); } data->pwm_mode[i] = @@ -500,14 +498,14 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i]) & 3) + 1; - data->pwm[i] = w83627ehf_read_value(client, + data->pwm[i] = w83627ehf_read_value(data, W83627EHF_REG_PWM[i]); - data->fan_min_output[i] = w83627ehf_read_value(client, + data->fan_min_output[i] = w83627ehf_read_value(data, W83627EHF_REG_FAN_MIN_OUTPUT[i]); - data->fan_stop_time[i] = w83627ehf_read_value(client, + data->fan_stop_time[i] = w83627ehf_read_value(data, W83627EHF_REG_FAN_STOP_TIME[i]); data->target_temp[i] = - w83627ehf_read_value(client, + w83627ehf_read_value(data, W83627EHF_REG_TARGET[i]) & (data->pwm_mode[i] == 1 ? 0x7f : 0xff); data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) @@ -515,26 +513,26 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) } /* Measured temperatures and limits */ - data->temp1 = w83627ehf_read_value(client, + data->temp1 = w83627ehf_read_value(data, W83627EHF_REG_TEMP1); - data->temp1_max = w83627ehf_read_value(client, + data->temp1_max = w83627ehf_read_value(data, W83627EHF_REG_TEMP1_OVER); - data->temp1_max_hyst = w83627ehf_read_value(client, + data->temp1_max_hyst = w83627ehf_read_value(data, W83627EHF_REG_TEMP1_HYST); for (i = 0; i < 2; i++) { - data->temp[i] = w83627ehf_read_value(client, + data->temp[i] = w83627ehf_read_value(data, W83627EHF_REG_TEMP[i]); - data->temp_max[i] = w83627ehf_read_value(client, + data->temp_max[i] = w83627ehf_read_value(data, W83627EHF_REG_TEMP_OVER[i]); - data->temp_max_hyst[i] = w83627ehf_read_value(client, + data->temp_max_hyst[i] = w83627ehf_read_value(data, W83627EHF_REG_TEMP_HYST[i]); } - data->alarms = w83627ehf_read_value(client, + data->alarms = w83627ehf_read_value(data, W83627EHF_REG_ALARM1) | - (w83627ehf_read_value(client, + (w83627ehf_read_value(data, W83627EHF_REG_ALARM2) << 8) | - (w83627ehf_read_value(client, + (w83627ehf_read_value(data, W83627EHF_REG_ALARM3) << 16); data->last_updated = jiffies; @@ -567,15 +565,14 @@ static ssize_t \ store_in_##reg (struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct w83627ehf_data *data = dev_get_drvdata(dev); \ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ u32 val = simple_strtoul(buf, NULL, 10); \ \ mutex_lock(&data->update_lock); \ data->in_##reg[nr] = in_to_reg(val, nr); \ - w83627ehf_write_value(client, W83627EHF_REG_IN_##REG(nr), \ + w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \ data->in_##reg[nr]); \ mutex_unlock(&data->update_lock); \ return count; \ @@ -673,8 +670,7 @@ static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct w83627ehf_data *data = i2c_get_clientdata(client); + struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; unsigned int val = simple_strtoul(buf, NULL, 10); @@ -730,9 +726,9 @@ store_fan_min(struct device *dev, struct device_attribute *attr, nr + 1, div_from_reg(data->fan_div[nr]), div_from_reg(new_div)); data->fan_div[nr] = new_div; - w83627ehf_write_fan_div(client, nr); + w83627ehf_write_fan_div(data, nr); } - w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr], + w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[nr], data->fan_min[nr]); mutex_unlock(&data->update_lock); @@ -793,13 +789,12 @@ static ssize_t \ store_temp1_##reg(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct w83627ehf_data *data = dev_get_drvdata(dev); \ u32 val = simple_strtoul(buf, NULL, 10); \ \ mutex_lock(&data->update_lock); \ data->temp1_##reg = temp1_to_reg(val, -128000, 127000); \ - w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \ + w83627ehf_write_value(data, W83627EHF_REG_TEMP1_##REG, \ data->temp1_##reg); \ mutex_unlock(&data->update_lock); \ return count; \ @@ -827,15 +822,14 @@ static ssize_t \ store_##reg(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct w83627ehf_data *data = dev_get_drvdata(dev); \ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ u32 val = simple_strtoul(buf, NULL, 10); \ \ mutex_lock(&data->update_lock); \ data->reg[nr] = LM75_TEMP_TO_REG(val); \ - w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \ + w83627ehf_write_value(data, W83627EHF_REG_TEMP_##REG[nr], \ data->reg[nr]); \ mutex_unlock(&data->update_lock); \ return count; \ @@ -882,8 +876,7 @@ static ssize_t store_pwm_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct w83627ehf_data *data = i2c_get_clientdata(client); + struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; u32 val = simple_strtoul(buf, NULL, 10); @@ -892,12 +885,12 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr, if (val > 1) return -EINVAL; mutex_lock(&data->update_lock); - reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]); + reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]); data->pwm_mode[nr] = val; reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[nr]); if (!val) reg |= 1 << W83627EHF_PWM_MODE_SHIFT[nr]; - w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg); + w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg); mutex_unlock(&data->update_lock); return count; } @@ -906,15 +899,14 @@ static ssize_t store_pwm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct w83627ehf_data *data = i2c_get_clientdata(client); + struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255); mutex_lock(&data->update_lock); data->pwm[nr] = val; - w83627ehf_write_value(client, W83627EHF_REG_PWM[nr], val); + w83627ehf_write_value(data, W83627EHF_REG_PWM[nr], val); mutex_unlock(&data->update_lock); return count; } @@ -923,8 +915,7 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct w83627ehf_data *data = i2c_get_clientdata(client); + struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; u32 val = simple_strtoul(buf, NULL, 10); @@ -933,11 +924,11 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr, if (!val || (val > 2)) /* only modes 1 and 2 are supported */ return -EINVAL; mutex_lock(&data->update_lock); - reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]); + reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]); data->pwm_enable[nr] = val; reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]); reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr]; - w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg); + w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg); mutex_unlock(&data->update_lock); return count; } @@ -960,15 +951,14 @@ static ssize_t store_target_temp(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct w83627ehf_data *data = i2c_get_clientdata(client); + struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 127000); mutex_lock(&data->update_lock); data->target_temp[nr] = val; - w83627ehf_write_value(client, W83627EHF_REG_TARGET[nr], val); + w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val); mutex_unlock(&data->update_lock); return count; } @@ -977,8 +967,7 @@ static ssize_t store_tolerance(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); - struct w83627ehf_data *data = i2c_get_clientdata(client); + struct w83627ehf_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; u16 reg; @@ -986,13 +975,13 @@ store_tolerance(struct device *dev, struct device_attribute *attr, u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 15000); mutex_lock(&data->update_lock); - reg = w83627ehf_read_value(client, W83627EHF_REG_TOLERANCE[nr]); + reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]); data->tolerance[nr] = val; if (nr == 1) reg = (reg & 0x0f) | (val << 4); else reg = (reg & 0xf0) | val; - w83627ehf_write_value(client, W83627EHF_REG_TOLERANCE[nr], reg); + w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg); mutex_unlock(&data->update_lock); return count; } @@ -1063,14 +1052,13 @@ static ssize_t \ store_##reg(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ {\ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct w83627ehf_data *data = dev_get_drvdata(dev); \ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 1, 255); \ mutex_lock(&data->update_lock); \ data->reg[nr] = val; \ - w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \ + w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \ mutex_unlock(&data->update_lock); \ return count; \ } @@ -1092,21 +1080,28 @@ static ssize_t \ store_##reg(struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct w83627ehf_data *data = dev_get_drvdata(dev); \ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ int nr = sensor_attr->index; \ u8 val = step_time_to_reg(simple_strtoul(buf, NULL, 10), \ data->pwm_mode[nr]); \ mutex_lock(&data->update_lock); \ data->reg[nr] = val; \ - w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \ + w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \ mutex_unlock(&data->update_lock); \ return count; \ } \ fan_time_functions(fan_stop_time, FAN_STOP_TIME) +static ssize_t show_name(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct w83627ehf_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", data->name); +} +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); static struct sensor_device_attribute sda_sf3_arrays_fan4[] = { SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, @@ -1131,7 +1126,7 @@ static struct sensor_device_attribute sda_sf3_arrays[] = { }; /* - * Driver and client management + * Driver and device management */ static void w83627ehf_device_remove_files(struct device *dev) @@ -1139,12 +1134,13 @@ static void w83627ehf_device_remove_files(struct device *dev) /* some entries in the following arrays may not have been used in * device_create_file(), but device_remove_file() will ignore them */ int i; + struct w83627ehf_data *data = dev_get_drvdata(dev); for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) device_remove_file(dev, &sda_sf3_arrays[i].dev_attr); for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr); - for (i = 0; i < w83627ehf_num_in; i++) { + for (i = 0; i < data->in_num; i++) { device_remove_file(dev, &sda_in_input[i].dev_attr); device_remove_file(dev, &sda_in_alarm[i].dev_attr); device_remove_file(dev, &sda_in_min[i].dev_attr); @@ -1165,43 +1161,48 @@ static void w83627ehf_device_remove_files(struct device *dev) } for (i = 0; i < ARRAY_SIZE(sda_temp); i++) device_remove_file(dev, &sda_temp[i].dev_attr); -} -static struct i2c_driver w83627ehf_driver; + device_remove_file(dev, &dev_attr_name); +} -static void w83627ehf_init_client(struct i2c_client *client) +/* Get the monitoring functions started */ +static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data) { int i; u8 tmp; /* Start monitoring is needed */ - tmp = w83627ehf_read_value(client, W83627EHF_REG_CONFIG); + tmp = w83627ehf_read_value(data, W83627EHF_REG_CONFIG); if (!(tmp & 0x01)) - w83627ehf_write_value(client, W83627EHF_REG_CONFIG, + w83627ehf_write_value(data, W83627EHF_REG_CONFIG, tmp | 0x01); /* Enable temp2 and temp3 if needed */ for (i = 0; i < 2; i++) { - tmp = w83627ehf_read_value(client, + tmp = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[i]); if (tmp & 0x01) - w83627ehf_write_value(client, + w83627ehf_write_value(data, W83627EHF_REG_TEMP_CONFIG[i], tmp & 0xfe); } } -static int w83627ehf_detect(struct i2c_adapter *adapter) +static int __devinit w83627ehf_probe(struct platform_device *pdev) { - struct i2c_client *client; + struct device *dev = &pdev->dev; + struct w83627ehf_sio_data *sio_data = dev->platform_data; struct w83627ehf_data *data; - struct device *dev; + struct resource *res; u8 fan4pin, fan5pin; int i, err = 0; - if (!request_region(address + IOREGION_OFFSET, IOREGION_LENGTH, - w83627ehf_driver.driver.name)) { + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!request_region(res->start, IOREGION_LENGTH, DRVNAME)) { err = -EBUSY; + dev_err(dev, "Failed to request region 0x%lx-0x%lx\n", + (unsigned long)res->start, + (unsigned long)res->start + IOREGION_LENGTH - 1); goto exit; } @@ -1210,41 +1211,29 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) goto exit_release; } - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; + data->addr = res->start; mutex_init(&data->lock); - client->adapter = adapter; - client->driver = &w83627ehf_driver; - client->flags = 0; - dev = &client->dev; - - if (w83627ehf_num_in == 9) - strlcpy(client->name, "w83627dhg", I2C_NAME_SIZE); - else /* just say ehf. 627EHG is 627EHF in lead-free packaging. */ - strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE); - - data->valid = 0; mutex_init(&data->update_lock); + data->name = w83627ehf_device_names[sio_data->kind]; + platform_set_drvdata(pdev, data); - /* Tell the i2c layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + /* 627EHG and 627EHF have 10 voltage inputs; DHG has 9 */ + data->in_num = (sio_data->kind == w83627dhg) ? 9 : 10; /* Initialize the chip */ - w83627ehf_init_client(client); + w83627ehf_init_device(data); /* A few vars need to be filled upon startup */ for (i = 0; i < 5; i++) - data->fan_min[i] = w83627ehf_read_value(client, + data->fan_min[i] = w83627ehf_read_value(data, W83627EHF_REG_FAN_MIN[i]); /* fan4 and fan5 share some pins with the GPIO and serial flash */ - superio_enter(); - fan5pin = superio_inb(0x24) & 0x2; - fan4pin = superio_inb(0x29) & 0x6; - superio_exit(); + superio_enter(sio_data->sioreg); + fan5pin = superio_inb(sio_data->sioreg, 0x24) & 0x2; + fan4pin = superio_inb(sio_data->sioreg, 0x29) & 0x6; + superio_exit(sio_data->sioreg); /* It looks like fan4 and fan5 pins can be alternatively used as fan on/off switches, but fan5 control is write only :/ @@ -1253,7 +1242,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) is not the default. */ data->has_fan = 0x07; /* fan1, fan2 and fan3 */ - i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1); + i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1); if ((i & (1 << 2)) && (!fan4pin)) data->has_fan |= (1 << 3); if (!(i & (1 << 1)) && (!fan5pin)) @@ -1273,7 +1262,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) goto exit_remove; } - for (i = 0; i < w83627ehf_num_in; i++) + for (i = 0; i < data->in_num; i++) if ((err = device_create_file(dev, &sda_in_input[i].dev_attr)) || (err = device_create_file(dev, &sda_in_alarm[i].dev_attr)) @@ -1313,6 +1302,10 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) if ((err = device_create_file(dev, &sda_temp[i].dev_attr))) goto exit_remove; + err = device_create_file(dev, &dev_attr_name); + if (err) + goto exit_remove; + data->class_dev = hwmon_device_register(dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); @@ -1323,95 +1316,166 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) exit_remove: w83627ehf_device_remove_files(dev); - i2c_detach_client(client); -exit_free: kfree(data); + platform_set_drvdata(pdev, NULL); exit_release: - release_region(address + IOREGION_OFFSET, IOREGION_LENGTH); + release_region(res->start, IOREGION_LENGTH); exit: return err; } -static int w83627ehf_detach_client(struct i2c_client *client) +static int __devexit w83627ehf_remove(struct platform_device *pdev) { - struct w83627ehf_data *data = i2c_get_clientdata(client); - int err; + struct w83627ehf_data *data = platform_get_drvdata(pdev); hwmon_device_unregister(data->class_dev); - w83627ehf_device_remove_files(&client->dev); - - if ((err = i2c_detach_client(client))) - return err; - release_region(client->addr + IOREGION_OFFSET, IOREGION_LENGTH); + w83627ehf_device_remove_files(&pdev->dev); + release_region(data->addr, IOREGION_LENGTH); + platform_set_drvdata(pdev, NULL); kfree(data); return 0; } -static struct i2c_driver w83627ehf_driver = { +static struct platform_driver w83627ehf_driver = { .driver = { .owner = THIS_MODULE, - .name = "w83627ehf", + .name = DRVNAME, }, - .attach_adapter = w83627ehf_detect, - .detach_client = w83627ehf_detach_client, + .probe = w83627ehf_probe, + .remove = __devexit_p(w83627ehf_remove), }; -static int __init w83627ehf_find(int sioaddr, unsigned short *addr) +/* w83627ehf_find() looks for a '627 in the Super-I/O config space */ +static int __init w83627ehf_find(int sioaddr, unsigned short *addr, + struct w83627ehf_sio_data *sio_data) { + static const char __initdata sio_name_W83627EHF[] = "W83627EHF"; + static const char __initdata sio_name_W83627EHG[] = "W83627EHG"; + static const char __initdata sio_name_W83627DHG[] = "W83627DHG"; + u16 val; + const char *sio_name; - REG = sioaddr; - VAL = sioaddr + 1; - superio_enter(); + superio_enter(sioaddr); - val = (superio_inb(SIO_REG_DEVID) << 8) - | superio_inb(SIO_REG_DEVID + 1); + val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8) + | superio_inb(sioaddr, SIO_REG_DEVID + 1); switch (val & SIO_ID_MASK) { - case SIO_W83627DHG_ID: - w83627ehf_num_in = 9; - break; case SIO_W83627EHF_ID: + sio_data->kind = w83627ehf; + sio_name = sio_name_W83627EHF; + break; case SIO_W83627EHG_ID: - w83627ehf_num_in = 10; + sio_data->kind = w83627ehf; + sio_name = sio_name_W83627EHG; + break; + case SIO_W83627DHG_ID: + sio_data->kind = w83627dhg; + sio_name = sio_name_W83627DHG; break; default: - printk(KERN_WARNING "w83627ehf: unsupported chip ID: 0x%04x\n", + pr_info(DRVNAME ": unsupported chip ID: 0x%04x\n", val); - superio_exit(); + superio_exit(sioaddr); return -ENODEV; } - superio_select(W83627EHF_LD_HWM); - val = (superio_inb(SIO_REG_ADDR) << 8) - | superio_inb(SIO_REG_ADDR + 1); + /* We have a known chip, find the HWM I/O address */ + superio_select(sioaddr, W83627EHF_LD_HWM); + val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8) + | superio_inb(sioaddr, SIO_REG_ADDR + 1); *addr = val & IOREGION_ALIGNMENT; if (*addr == 0) { - superio_exit(); + superio_exit(sioaddr); return -ENODEV; } /* Activate logical device if needed */ - val = superio_inb(SIO_REG_ENABLE); + val = superio_inb(sioaddr, SIO_REG_ENABLE); if (!(val & 0x01)) - superio_outb(SIO_REG_ENABLE, val | 0x01); + superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01); + + superio_exit(sioaddr); + pr_info(DRVNAME ": Found %s chip at %#x\n", sio_name, *addr); + sio_data->sioreg = sioaddr; - superio_exit(); return 0; } +/* when Super-I/O functions move to a separate file, the Super-I/O + * bus will manage the lifetime of the device and this module will only keep + * track of the w83627ehf driver. But since we platform_device_alloc(), we + * must keep track of the device */ +static struct platform_device *pdev; + static int __init sensors_w83627ehf_init(void) { - if (w83627ehf_find(0x2e, &address) - && w83627ehf_find(0x4e, &address)) + int err; + unsigned short address; + struct resource res; + struct w83627ehf_sio_data sio_data; + + /* initialize sio_data->kind and sio_data->sioreg. + * + * when Super-I/O functions move to a separate file, the Super-I/O + * driver will probe 0x2e and 0x4e and auto-detect the presence of a + * w83627ehf hardware monitor, and call probe() */ + if (w83627ehf_find(0x2e, &address, &sio_data) && + w83627ehf_find(0x4e, &address, &sio_data)) return -ENODEV; - return i2c_isa_add_driver(&w83627ehf_driver); + err = platform_driver_register(&w83627ehf_driver); + if (err) + goto exit; + + if (!(pdev = platform_device_alloc(DRVNAME, address))) { + err = -ENOMEM; + printk(KERN_ERR DRVNAME ": Device allocation failed\n"); + goto exit_unregister; + } + + err = platform_device_add_data(pdev, &sio_data, + sizeof(struct w83627ehf_sio_data)); + if (err) { + printk(KERN_ERR DRVNAME ": Platform data allocation failed\n"); + goto exit_device_put; + } + + memset(&res, 0, sizeof(res)); + res.name = DRVNAME; + res.start = address + IOREGION_OFFSET; + res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; + res.flags = IORESOURCE_IO; + err = platform_device_add_resources(pdev, &res, 1); + if (err) { + printk(KERN_ERR DRVNAME ": Device resource addition failed " + "(%d)\n", err); + goto exit_device_put; + } + + /* platform_device_add calls probe() */ + err = platform_device_add(pdev); + if (err) { + printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", + err); + goto exit_device_put; + } + + return 0; + +exit_device_put: + platform_device_put(pdev); +exit_unregister: + platform_driver_unregister(&w83627ehf_driver); +exit: + return err; } static void __exit sensors_w83627ehf_exit(void) { - i2c_isa_del_driver(&w83627ehf_driver); + platform_device_unregister(pdev); + platform_driver_unregister(&w83627ehf_driver); } MODULE_AUTHOR("Jean Delvare "); -- 2.39.5