From 1d26f455eb0db0bf4d4b7177547f4310b645a32a Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Sat, 26 Nov 2005 20:18:43 +0100 Subject: [PATCH] [PATCH] i2c: Add support for Barco LPT->DVI to i2c-parport The following patch adds support for the Barco LPT->DVI I2C adapter to the i2c-parport driver. Signed-off-by: Peter Korsgaard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/busses/i2c-parport | 1 + drivers/i2c/busses/i2c-parport.h | 12 +++++++++++- 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport index 9f1d0082da..d9f23c0763 100644 --- a/Documentation/i2c/busses/i2c-parport +++ b/Documentation/i2c/busses/i2c-parport @@ -17,6 +17,7 @@ It currently supports the following devices: * Velleman K8000 adapter * ELV adapter * Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032) + * Barco LPT->DVI (K5800236) adapter These devices use different pinout configurations, so you have to tell the driver what you have, using the type module parameter. There is no diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h index f63a537792..d702e5e038 100644 --- a/drivers/i2c/busses/i2c-parport.h +++ b/drivers/i2c/busses/i2c-parport.h @@ -80,6 +80,14 @@ static struct adapter_parm adapter_parm[] = { .setscl = { 0x01, DATA, 1 }, .getsda = { 0x10, STAT, 1 }, }, + /* type 6: Barco LPT->DVI (K5800236) adapter */ + { + .setsda = { 0x02, DATA, 1 }, + .setscl = { 0x01, DATA, 1 }, + .getsda = { 0x20, STAT, 0 }, + .getscl = { 0x40, STAT, 0 }, + .init = { 0xfc, DATA, 0 }, + }, }; static int type; @@ -91,4 +99,6 @@ MODULE_PARM_DESC(type, " 2 = Velleman K8000 adapter\n" " 3 = ELV adapter\n" " 4 = ADM1032 evaluation board\n" - " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"); + " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n" + " 6 = Barco LPT->DVI (K5800236) adapter\n" +); -- 2.39.5