From 19ca5d27e15c10d8529984ecd98dcba2637edcd2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 6 May 2006 11:26:30 +0100 Subject: [PATCH] [ARM] Allow SA1100 RTC alarm to be configured for wakeup The SA1100 RTC alarm can be configured to wake up the CPU from sleep mode, and the RTC driver has been using the API to configure this mode. Unfortunately, the code was which sets the required bit in the hardware was missing. Signed-off-by: Russell King --- arch/arm/mach-sa1100/irq.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index c131a5201b..b3a5602418 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -199,10 +199,26 @@ static void sa1100_unmask_irq(unsigned int irq) ICMR |= (1 << irq); } +/* + * Apart form GPIOs, only the RTC alarm can be a wakeup event. + */ +static int sa1100_set_wake(unsigned int irq, unsigned int on) +{ + if (irq == IRQ_RTCAlrm) { + if (on) + PWER |= PWER_RTC; + else + PWER &= ~PWER_RTC; + return 0; + } + return -EINVAL; +} + static struct irqchip sa1100_normal_chip = { .ack = sa1100_mask_irq, .mask = sa1100_mask_irq, .unmask = sa1100_unmask_irq, + .set_wake = sa1100_set_wake, }; static struct resource irq_resource = { -- 2.39.5