From 16f4bc738d616962a844e80f7b1fcb52c626542a Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Wed, 30 Jan 2008 13:30:44 +0100 Subject: [PATCH] x86 vDSO: ia32 vsyscall removal This removes all the old vsyscall code from arch/x86/ia32/ that is no longer used because arch/x86/vdso/ code has replaced it. Signed-off-by: Roland McGrath Cc: Andrew Morton Cc: Linus Torvalds Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Makefile_64 | 3 - arch/x86/ia32/Makefile | 37 -------- arch/x86/ia32/syscall32.c | 90 ------------------ arch/x86/ia32/syscall32_syscall.S | 17 ---- arch/x86/ia32/vsyscall-sigreturn.S | 142 ----------------------------- arch/x86/ia32/vsyscall-syscall.S | 69 -------------- arch/x86/ia32/vsyscall-sysenter.S | 95 ------------------- arch/x86/ia32/vsyscall.lds | 80 ---------------- include/asm-x86/Kbuild | 1 - include/asm-x86/vsyscall32.h | 20 ---- 10 files changed, 554 deletions(-) delete mode 100644 arch/x86/ia32/syscall32.c delete mode 100644 arch/x86/ia32/syscall32_syscall.S delete mode 100644 arch/x86/ia32/vsyscall-sigreturn.S delete mode 100644 arch/x86/ia32/vsyscall-syscall.S delete mode 100644 arch/x86/ia32/vsyscall-sysenter.S delete mode 100644 arch/x86/ia32/vsyscall.lds delete mode 100644 include/asm-x86/vsyscall32.h diff --git a/arch/x86/Makefile_64 b/arch/x86/Makefile_64 index 93cf17769f..d35a0c50b6 100644 --- a/arch/x86/Makefile_64 +++ b/arch/x86/Makefile_64 @@ -117,9 +117,6 @@ install: vdso_install $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ vdso_install: -ifeq ($(CONFIG_IA32_EMULATION),y) - $(Q)$(MAKE) $(build)=arch/x86/ia32 $@ -endif $(Q)$(MAKE) $(build)=arch/x86/vdso $@ archclean: diff --git a/arch/x86/ia32/Makefile b/arch/x86/ia32/Makefile index 1f58a21a41..8c19b763b2 100644 --- a/arch/x86/ia32/Makefile +++ b/arch/x86/ia32/Makefile @@ -12,40 +12,3 @@ obj-$(CONFIG_IA32_AOUT) += ia32_aout.o audit-class-$(CONFIG_AUDIT) := audit.o obj-$(CONFIG_IA32_EMULATION) += $(audit-class-y) - -$(obj)/syscall32_syscall.o: \ - $(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so) - -# Teach kbuild about targets -targets := $(foreach F,$(addprefix vsyscall-,sysenter syscall),\ - $F.o $F.so $F.so.dbg) - -# The DSO images are built using a special linker script -quiet_cmd_syscall = SYSCALL $@ - cmd_syscall = $(CC) -m32 -nostdlib -shared \ - $(call ld-option, -Wl$(comma)--hash-style=sysv) \ - -Wl,-soname=linux-gate.so.1 -o $@ \ - -Wl,-T,$(filter-out FORCE,$^) - -$(obj)/%.so: OBJCOPYFLAGS := -S -$(obj)/%.so: $(obj)/%.so.dbg FORCE - $(call if_changed,objcopy) - -$(obj)/vsyscall-sysenter.so.dbg $(obj)/vsyscall-syscall.so.dbg: \ -$(obj)/vsyscall-%.so.dbg: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE - $(call if_changed,syscall) - -AFLAGS_vsyscall-sysenter.o = -m32 -Wa,-32 -AFLAGS_vsyscall-syscall.o = -m32 -Wa,-32 - -vdsos := vdso32-sysenter.so vdso32-syscall.so - -quiet_cmd_vdso_install = INSTALL $@ - cmd_vdso_install = cp $(@:vdso32-%.so=$(obj)/vsyscall-%.so.dbg) \ - $(MODLIB)/vdso/$@ - -$(vdsos): - @mkdir -p $(MODLIB)/vdso - $(call cmd,vdso_install) - -vdso_install: $(vdsos) diff --git a/arch/x86/ia32/syscall32.c b/arch/x86/ia32/syscall32.c deleted file mode 100644 index 98ff99f5b5..0000000000 --- a/arch/x86/ia32/syscall32.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright 2002,2003 Andi Kleen, SuSE Labs - * - * vsyscall handling for 32bit processes. Map a stub page into it on - * demand because 32bit cannot reach the kernel's fixmaps - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern unsigned char syscall32_syscall[], syscall32_syscall_end[]; -extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[]; -extern int sysctl_vsyscall32; - -static struct page *syscall32_pages[1]; -static int use_sysenter = -1; - -struct linux_binprm; - -/* Setup a VMA at program startup for the vsyscall page */ -int syscall32_setup_pages(struct linux_binprm *bprm, int exstack) -{ - struct mm_struct *mm = current->mm; - int ret; - - down_write(&mm->mmap_sem); - /* - * MAYWRITE to allow gdb to COW and set breakpoints - * - * Make sure the vDSO gets into every core dump. - * Dumping its contents makes post-mortem fully interpretable later - * without matching up the same kernel and hardware config to see - * what PC values meant. - */ - /* Could randomize here */ - ret = install_special_mapping(mm, VSYSCALL32_BASE, PAGE_SIZE, - VM_READ|VM_EXEC| - VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC| - VM_ALWAYSDUMP, - syscall32_pages); - if (ret == 0) { - current->mm->context.vdso = (void __user *)VSYSCALL32_BASE; - current_thread_info()->sysenter_return = VSYSCALL32_SYSEXIT; - } - up_write(&mm->mmap_sem); - return ret; -} - -static int __init init_syscall32(void) -{ - char *syscall32_page = (void *)get_zeroed_page(GFP_KERNEL); - - if (!syscall32_page) - panic("Cannot allocate syscall32 page"); - syscall32_pages[0] = virt_to_page(syscall32_page); - if (use_sysenter > 0) { - memcpy(syscall32_page, syscall32_sysenter, - syscall32_sysenter_end - syscall32_sysenter); - } else { - memcpy(syscall32_page, syscall32_syscall, - syscall32_syscall_end - syscall32_syscall); - } - return 0; -} -__initcall(init_syscall32); - -/* May not be __init: called during resume */ -void syscall32_cpu_init(void) -{ - if (use_sysenter < 0) - use_sysenter = (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL); - - /* - * Load these always in case some future AMD CPU supports - * SYSENTER from compat mode too. - */ - checking_wrmsrl(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS); - checking_wrmsrl(MSR_IA32_SYSENTER_ESP, 0ULL); - checking_wrmsrl(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target); - - wrmsrl(MSR_CSTAR, ia32_cstar_target); -} diff --git a/arch/x86/ia32/syscall32_syscall.S b/arch/x86/ia32/syscall32_syscall.S deleted file mode 100644 index 933f0f08b1..0000000000 --- a/arch/x86/ia32/syscall32_syscall.S +++ /dev/null @@ -1,17 +0,0 @@ -/* 32bit VDSOs mapped into user space. */ - - .section ".init.data","aw" - - .globl syscall32_syscall - .globl syscall32_syscall_end - -syscall32_syscall: - .incbin "arch/x86/ia32/vsyscall-syscall.so" -syscall32_syscall_end: - - .globl syscall32_sysenter - .globl syscall32_sysenter_end - -syscall32_sysenter: - .incbin "arch/x86/ia32/vsyscall-sysenter.so" -syscall32_sysenter_end: diff --git a/arch/x86/ia32/vsyscall-sigreturn.S b/arch/x86/ia32/vsyscall-sigreturn.S deleted file mode 100644 index 295eecf91f..0000000000 --- a/arch/x86/ia32/vsyscall-sigreturn.S +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Common code for the sigreturn entry points on the vsyscall page. - * This code uses SYSCALL_ENTER_KERNEL (either syscall or int $0x80) - * to enter the kernel. - * This file is #include'd by vsyscall-*.S to define them after the - * vsyscall entry point. The addresses we get for these entry points - * by doing ".balign 32" must match in both versions of the page. - */ - - .code32 - .section .text.sigreturn,"ax" - .balign 32 - .globl __kernel_sigreturn - .type __kernel_sigreturn,@function -__kernel_sigreturn: -.LSTART_sigreturn: - popl %eax - movl $__NR_ia32_sigreturn, %eax - SYSCALL_ENTER_KERNEL -.LEND_sigreturn: - .size __kernel_sigreturn,.-.LSTART_sigreturn - - .section .text.rtsigreturn,"ax" - .balign 32 - .globl __kernel_rt_sigreturn - .type __kernel_rt_sigreturn,@function -__kernel_rt_sigreturn: -.LSTART_rt_sigreturn: - movl $__NR_ia32_rt_sigreturn, %eax - SYSCALL_ENTER_KERNEL -.LEND_rt_sigreturn: - .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn - - .section .eh_frame,"a",@progbits -.LSTARTFRAMES: - .long .LENDCIES-.LSTARTCIES -.LSTARTCIES: - .long 0 /* CIE ID */ - .byte 1 /* Version number */ - .string "zRS" /* NUL-terminated augmentation string */ - .uleb128 1 /* Code alignment factor */ - .sleb128 -4 /* Data alignment factor */ - .byte 8 /* Return address register column */ - .uleb128 1 /* Augmentation value length */ - .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */ - .byte 0x0c /* DW_CFA_def_cfa */ - .uleb128 4 - .uleb128 4 - .byte 0x88 /* DW_CFA_offset, column 0x8 */ - .uleb128 1 - .align 4 -.LENDCIES: - - .long .LENDFDE2-.LSTARTFDE2 /* Length FDE */ -.LSTARTFDE2: - .long .LSTARTFDE2-.LSTARTFRAMES /* CIE pointer */ - /* HACK: The dwarf2 unwind routines will subtract 1 from the - return address to get an address in the middle of the - presumed call instruction. Since we didn't get here via - a call, we need to include the nop before the real start - to make up for it. */ - .long .LSTART_sigreturn-1-. /* PC-relative start address */ - .long .LEND_sigreturn-.LSTART_sigreturn+1 - .uleb128 0 /* Augmentation length */ - /* What follows are the instructions for the table generation. - We record the locations of each register saved. This is - complicated by the fact that the "CFA" is always assumed to - be the value of the stack pointer in the caller. This means - that we must define the CFA of this body of code to be the - saved value of the stack pointer in the sigcontext. Which - also means that there is no fixed relation to the other - saved registers, which means that we must use DW_CFA_expression - to compute their addresses. It also means that when we - adjust the stack with the popl, we have to do it all over again. */ - -#define do_cfa_expr(offset) \ - .byte 0x0f; /* DW_CFA_def_cfa_expression */ \ - .uleb128 1f-0f; /* length */ \ -0: .byte 0x74; /* DW_OP_breg4 */ \ - .sleb128 offset; /* offset */ \ - .byte 0x06; /* DW_OP_deref */ \ -1: - -#define do_expr(regno, offset) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno; /* regno */ \ - .uleb128 1f-0f; /* length */ \ -0: .byte 0x74; /* DW_OP_breg4 */ \ - .sleb128 offset; /* offset */ \ -1: - - do_cfa_expr(IA32_SIGCONTEXT_esp+4) - do_expr(0, IA32_SIGCONTEXT_eax+4) - do_expr(1, IA32_SIGCONTEXT_ecx+4) - do_expr(2, IA32_SIGCONTEXT_edx+4) - do_expr(3, IA32_SIGCONTEXT_ebx+4) - do_expr(5, IA32_SIGCONTEXT_ebp+4) - do_expr(6, IA32_SIGCONTEXT_esi+4) - do_expr(7, IA32_SIGCONTEXT_edi+4) - do_expr(8, IA32_SIGCONTEXT_eip+4) - - .byte 0x42 /* DW_CFA_advance_loc 2 -- nop; popl eax. */ - - do_cfa_expr(IA32_SIGCONTEXT_esp) - do_expr(0, IA32_SIGCONTEXT_eax) - do_expr(1, IA32_SIGCONTEXT_ecx) - do_expr(2, IA32_SIGCONTEXT_edx) - do_expr(3, IA32_SIGCONTEXT_ebx) - do_expr(5, IA32_SIGCONTEXT_ebp) - do_expr(6, IA32_SIGCONTEXT_esi) - do_expr(7, IA32_SIGCONTEXT_edi) - do_expr(8, IA32_SIGCONTEXT_eip) - - .align 4 -.LENDFDE2: - - .long .LENDFDE3-.LSTARTFDE3 /* Length FDE */ -.LSTARTFDE3: - .long .LSTARTFDE3-.LSTARTFRAMES /* CIE pointer */ - /* HACK: See above wrt unwind library assumptions. */ - .long .LSTART_rt_sigreturn-1-. /* PC-relative start address */ - .long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1 - .uleb128 0 /* Augmentation */ - /* What follows are the instructions for the table generation. - We record the locations of each register saved. This is - slightly less complicated than the above, since we don't - modify the stack pointer in the process. */ - - do_cfa_expr(IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esp) - do_expr(0, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eax) - do_expr(1, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ecx) - do_expr(2, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edx) - do_expr(3, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebx) - do_expr(5, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebp) - do_expr(6, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esi) - do_expr(7, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edi) - do_expr(8, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eip) - - .align 4 -.LENDFDE3: - -#include "../vdso/vdso32/note.S" diff --git a/arch/x86/ia32/vsyscall-syscall.S b/arch/x86/ia32/vsyscall-syscall.S deleted file mode 100644 index cf9ef678de..0000000000 --- a/arch/x86/ia32/vsyscall-syscall.S +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Code for the vsyscall page. This version uses the syscall instruction. - */ - -#include -#include -#include - - .code32 - .text - .section .text.vsyscall,"ax" - .globl __kernel_vsyscall - .type __kernel_vsyscall,@function -__kernel_vsyscall: -.LSTART_vsyscall: - push %ebp -.Lpush_ebp: - movl %ecx, %ebp - syscall - movl $__USER32_DS, %ecx - movl %ecx, %ss - movl %ebp, %ecx - popl %ebp -.Lpop_ebp: - ret -.LEND_vsyscall: - .size __kernel_vsyscall,.-.LSTART_vsyscall - - .section .eh_frame,"a",@progbits -.LSTARTFRAME: - .long .LENDCIE-.LSTARTCIE -.LSTARTCIE: - .long 0 /* CIE ID */ - .byte 1 /* Version number */ - .string "zR" /* NUL-terminated augmentation string */ - .uleb128 1 /* Code alignment factor */ - .sleb128 -4 /* Data alignment factor */ - .byte 8 /* Return address register column */ - .uleb128 1 /* Augmentation value length */ - .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */ - .byte 0x0c /* DW_CFA_def_cfa */ - .uleb128 4 - .uleb128 4 - .byte 0x88 /* DW_CFA_offset, column 0x8 */ - .uleb128 1 - .align 4 -.LENDCIE: - - .long .LENDFDE1-.LSTARTFDE1 /* Length FDE */ -.LSTARTFDE1: - .long .LSTARTFDE1-.LSTARTFRAME /* CIE pointer */ - .long .LSTART_vsyscall-. /* PC-relative start address */ - .long .LEND_vsyscall-.LSTART_vsyscall - .uleb128 0 /* Augmentation length */ - /* What follows are the instructions for the table generation. - We have to record all changes of the stack pointer. */ - .byte 0x40 + .Lpush_ebp-.LSTART_vsyscall /* DW_CFA_advance_loc */ - .byte 0x0e /* DW_CFA_def_cfa_offset */ - .uleb128 8 - .byte 0x85, 0x02 /* DW_CFA_offset %ebp -8 */ - .byte 0x40 + .Lpop_ebp-.Lpush_ebp /* DW_CFA_advance_loc */ - .byte 0xc5 /* DW_CFA_restore %ebp */ - .byte 0x0e /* DW_CFA_def_cfa_offset */ - .uleb128 4 - .align 4 -.LENDFDE1: - -#define SYSCALL_ENTER_KERNEL syscall -#include "vsyscall-sigreturn.S" diff --git a/arch/x86/ia32/vsyscall-sysenter.S b/arch/x86/ia32/vsyscall-sysenter.S deleted file mode 100644 index ae056e553d..0000000000 --- a/arch/x86/ia32/vsyscall-sysenter.S +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Code for the vsyscall page. This version uses the sysenter instruction. - */ - -#include -#include - - .code32 - .text - .section .text.vsyscall,"ax" - .globl __kernel_vsyscall - .type __kernel_vsyscall,@function -__kernel_vsyscall: -.LSTART_vsyscall: - push %ecx -.Lpush_ecx: - push %edx -.Lpush_edx: - push %ebp -.Lenter_kernel: - movl %esp,%ebp - sysenter - .space 7,0x90 - jmp .Lenter_kernel - /* 16: System call normal return point is here! */ - pop %ebp -.Lpop_ebp: - pop %edx -.Lpop_edx: - pop %ecx -.Lpop_ecx: - ret -.LEND_vsyscall: - .size __kernel_vsyscall,.-.LSTART_vsyscall - - .section .eh_frame,"a",@progbits -.LSTARTFRAME: - .long .LENDCIE-.LSTARTCIE -.LSTARTCIE: - .long 0 /* CIE ID */ - .byte 1 /* Version number */ - .string "zR" /* NUL-terminated augmentation string */ - .uleb128 1 /* Code alignment factor */ - .sleb128 -4 /* Data alignment factor */ - .byte 8 /* Return address register column */ - .uleb128 1 /* Augmentation value length */ - .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */ - .byte 0x0c /* DW_CFA_def_cfa */ - .uleb128 4 - .uleb128 4 - .byte 0x88 /* DW_CFA_offset, column 0x8 */ - .uleb128 1 - .align 4 -.LENDCIE: - - .long .LENDFDE1-.LSTARTFDE1 /* Length FDE */ -.LSTARTFDE1: - .long .LSTARTFDE1-.LSTARTFRAME /* CIE pointer */ - .long .LSTART_vsyscall-. /* PC-relative start address */ - .long .LEND_vsyscall-.LSTART_vsyscall - .uleb128 0 /* Augmentation length */ - /* What follows are the instructions for the table generation. - We have to record all changes of the stack pointer. */ - .byte 0x04 /* DW_CFA_advance_loc4 */ - .long .Lpush_ecx-.LSTART_vsyscall - .byte 0x0e /* DW_CFA_def_cfa_offset */ - .byte 0x08 /* RA at offset 8 now */ - .byte 0x04 /* DW_CFA_advance_loc4 */ - .long .Lpush_edx-.Lpush_ecx - .byte 0x0e /* DW_CFA_def_cfa_offset */ - .byte 0x0c /* RA at offset 12 now */ - .byte 0x04 /* DW_CFA_advance_loc4 */ - .long .Lenter_kernel-.Lpush_edx - .byte 0x0e /* DW_CFA_def_cfa_offset */ - .byte 0x10 /* RA at offset 16 now */ - .byte 0x85, 0x04 /* DW_CFA_offset %ebp -16 */ - /* Finally the epilogue. */ - .byte 0x04 /* DW_CFA_advance_loc4 */ - .long .Lpop_ebp-.Lenter_kernel - .byte 0x0e /* DW_CFA_def_cfa_offset */ - .byte 0x12 /* RA at offset 12 now */ - .byte 0xc5 /* DW_CFA_restore %ebp */ - .byte 0x04 /* DW_CFA_advance_loc4 */ - .long .Lpop_edx-.Lpop_ebp - .byte 0x0e /* DW_CFA_def_cfa_offset */ - .byte 0x08 /* RA at offset 8 now */ - .byte 0x04 /* DW_CFA_advance_loc4 */ - .long .Lpop_ecx-.Lpop_edx - .byte 0x0e /* DW_CFA_def_cfa_offset */ - .byte 0x04 /* RA at offset 4 now */ - .align 4 -.LENDFDE1: - -#define SYSCALL_ENTER_KERNEL int $0x80 -#include "vsyscall-sigreturn.S" diff --git a/arch/x86/ia32/vsyscall.lds b/arch/x86/ia32/vsyscall.lds deleted file mode 100644 index 1dc86ff5bc..0000000000 --- a/arch/x86/ia32/vsyscall.lds +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Linker script for vsyscall DSO. The vsyscall page is an ELF shared - * object prelinked to its virtual address. This script controls its layout. - */ - -/* This must match . */ -VSYSCALL_BASE = 0xffffe000; - -SECTIONS -{ - . = VSYSCALL_BASE + SIZEOF_HEADERS; - - .hash : { *(.hash) } :text - .gnu.hash : { *(.gnu.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .gnu.version : { *(.gnu.version) } - .gnu.version_d : { *(.gnu.version_d) } - .gnu.version_r : { *(.gnu.version_r) } - - /* This linker script is used both with -r and with -shared. - For the layouts to match, we need to skip more than enough - space for the dynamic symbol table et al. If this amount - is insufficient, ld -shared will barf. Just increase it here. */ - . = VSYSCALL_BASE + 0x400; - - .text.vsyscall : { *(.text.vsyscall) } :text =0x90909090 - - /* This is an 32bit object and we cannot easily get the offsets - into the 64bit kernel. Just hardcode them here. This assumes - that all the stubs don't need more than 0x100 bytes. */ - . = VSYSCALL_BASE + 0x500; - - .text.sigreturn : { *(.text.sigreturn) } :text =0x90909090 - - . = VSYSCALL_BASE + 0x600; - - .text.rtsigreturn : { *(.text.rtsigreturn) } :text =0x90909090 - - .note : { *(.note.*) } :text :note - .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr - .eh_frame : { KEEP (*(.eh_frame)) } :text - .dynamic : { *(.dynamic) } :text :dynamic - .useless : { - *(.got.plt) *(.got) - *(.data .data.* .gnu.linkonce.d.*) - *(.dynbss) - *(.bss .bss.* .gnu.linkonce.b.*) - } :text -} - -/* - * We must supply the ELF program headers explicitly to get just one - * PT_LOAD segment, and set the flags explicitly to make segments read-only. - */ -PHDRS -{ - text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */ - dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ - note PT_NOTE FLAGS(4); /* PF_R */ - eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */ -} - -/* - * This controls what symbols we export from the DSO. - */ -VERSION -{ - LINUX_2.5 { - global: - __kernel_vsyscall; - __kernel_sigreturn; - __kernel_rt_sigreturn; - - local: *; - }; -} - -/* The ELF entry point can be used to set the AT_SYSINFO value. */ -ENTRY(__kernel_vsyscall); diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild index 12db5a1cdd..22e3a284c1 100644 --- a/include/asm-x86/Kbuild +++ b/include/asm-x86/Kbuild @@ -9,7 +9,6 @@ header-y += prctl.h header-y += ptrace-abi.h header-y += sigcontext32.h header-y += ucontext.h -header-y += vsyscall32.h unifdef-y += e820.h unifdef-y += ist.h diff --git a/include/asm-x86/vsyscall32.h b/include/asm-x86/vsyscall32.h deleted file mode 100644 index c631c082f8..0000000000 --- a/include/asm-x86/vsyscall32.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_VSYSCALL32_H -#define _ASM_VSYSCALL32_H 1 - -/* Values need to match arch/x86_64/ia32/vsyscall.lds */ - -#ifdef __ASSEMBLY__ -#define VSYSCALL32_BASE 0xffffe000 -#define VSYSCALL32_SYSEXIT (VSYSCALL32_BASE + 0x410) -#else -#define VSYSCALL32_BASE 0xffffe000UL -#define VSYSCALL32_END (VSYSCALL32_BASE + PAGE_SIZE) -#define VSYSCALL32_EHDR ((const struct elf32_hdr *) VSYSCALL32_BASE) - -#define VSYSCALL32_VSYSCALL ((void *)VSYSCALL32_BASE + 0x400) -#define VSYSCALL32_SYSEXIT ((void *)VSYSCALL32_BASE + 0x410) -#define VSYSCALL32_SIGRETURN ((void __user *)VSYSCALL32_BASE + 0x500) -#define VSYSCALL32_RTSIGRETURN ((void __user *)VSYSCALL32_BASE + 0x600) -#endif - -#endif -- 2.39.5