From 15ed6cc0ba6b7beaf31c6756b0c838188800051b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 30 Apr 2008 00:53:55 -0700 Subject: [PATCH] cyclades: coding style & review Signed-off-by: Alan Cox Cc: Arnaldo Carvalho de Melo Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 308 +++++++++++++++++++--------------------- 1 file changed, 149 insertions(+), 159 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 028db1b8fc..ba795c757d 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -21,7 +21,6 @@ * * This version supports shared IRQ's (only for PCI boards). * - * $Log: cyclades.c,v $ * Prevent users from opening non-existing Z ports. * * Revision 2.3.2.8 2000/07/06 18:14:16 ivan @@ -62,7 +61,7 @@ * Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined; * * Revision 2.3.2.2 1999/10/01 11:27:43 ivan - * Fixed bug in cyz_poll that would make all ports but port 0 + * Fixed bug in cyz_poll that would make all ports but port 0 * unable to transmit/receive data (Cyclades-Z only); * Implemented logic to prevent the RX buffer from being stuck with data * due to a driver / firmware race condition in interrupt op mode @@ -83,25 +82,25 @@ * Revision 2.3.1.1 1999/07/15 16:45:53 ivan * Removed CY_PROC conditional compilation; * Implemented SMP-awareness for the driver; - * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off] + * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off] * functions; * The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs * (irq=NN) as parameters (only for ISA boards); - * Fixed bug in set_line_char that would prevent the Cyclades-Z + * Fixed bug in set_line_char that would prevent the Cyclades-Z * ports from being configured at speeds above 115.2Kbps; * Fixed bug in cy_set_termios that would prevent XON/XOFF flow control * switching from working properly; - * The driver now only prints IRQ info for the Cyclades-Z if it's + * The driver now only prints IRQ info for the Cyclades-Z if it's * configured to work in interrupt mode; * * Revision 2.2.2.3 1999/06/28 11:13:29 ivan * Added support for interrupt mode operation for the Z cards; * Removed the driver inactivity control for the Z; - * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when + * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when * the Z firmware is not loaded yet; - * Replaced the "manual" Z Tx flush buffer by a call to a FW command of + * Replaced the "manual" Z Tx flush buffer by a call to a FW command of * same functionality; - * Implemented workaround for IRQ setting loss on the PCI configuration + * Implemented workaround for IRQ setting loss on the PCI configuration * registers after a PCI bridge EEPROM reload (affects PLX9060 only); * * Revision 2.2.2.2 1999/05/14 17:18:15 ivan @@ -112,22 +111,22 @@ * BREAK implementation changed in order to make use of the 'break_ctl' * TTY facility; * Fixed typo in TTY structure field 'driver_name'; - * Included a PCI bridge reset and EEPROM reload in the board + * Included a PCI bridge reset and EEPROM reload in the board * initialization code (for both Y and Z series). * * Revision 2.2.2.1 1999/04/08 16:17:43 ivan - * Fixed a bug in cy_wait_until_sent that was preventing the port to be + * Fixed a bug in cy_wait_until_sent that was preventing the port to be * closed properly after a SIGINT; * Module usage counter scheme revisited; * Added support to the upcoming Y PCI boards (i.e., support to additional * PCI Device ID's). - * + * * Revision 2.2.1.10 1999/01/20 16:14:29 ivan * Removed all unnecessary page-alignement operations in ioremap calls * (ioremap is currently safe for these operations). * * Revision 2.2.1.9 1998/12/30 18:18:30 ivan - * Changed access to PLX PCI bridge registers from I/O to MMIO, in + * Changed access to PLX PCI bridge registers from I/O to MMIO, in * order to make PLX9050-based boards work with certain motherboards. * * Revision 2.2.1.8 1998/11/13 12:46:20 ivan @@ -148,7 +147,7 @@ * Fixed Cyclom-4Yo hardware detection bug. * * Revision 2.2.1.4 1998/08/04 11:02:50 ivan - * /proc/cyclades implementation with great collaboration of + * /proc/cyclades implementation with great collaboration of * Marc Lewis ; * cyy_interrupt was changed to avoid occurrence of kernel oopses * during PPP operation. @@ -157,7 +156,7 @@ * General code review in order to comply with 2.1 kernel standards; * data loss prevention for slow devices revisited (cy_wait_until_sent * was created); - * removed conditional compilation for new/old PCI structure support + * removed conditional compilation for new/old PCI structure support * (now the driver only supports the new PCI structure). * * Revision 2.2.1.1 1998/03/19 16:43:12 ivan @@ -168,7 +167,7 @@ * cleaned up the data loss fix; * fixed XON/XOFF handling once more (Cyclades-Z); * general review of the driver routines; - * introduction of a mechanism to prevent data loss with slow + * introduction of a mechanism to prevent data loss with slow * printers, by forcing a delay before closing the port. * * Revision 2.1.1.2 1998/02/17 16:50:00 ivan @@ -182,12 +181,12 @@ * Code review for the module cleanup routine; * fixed RTS and DTR status report for new CD1400's in get_modem_info; * includes anonymous changes regarding signal_pending. - * + * * Revision 2.1 1997/11/01 17:42:41 ivan * Changes in the driver to support Alpha systems (except 8Zo V_1); * BREAK fix for the Cyclades-Z boards; * driver inactivity control by FW implemented; - * introduction of flag that allows driver to take advantage of + * introduction of flag that allows driver to take advantage of * a special CD1400 feature related to HW flow control; * added support for the CD1400 rev. J (Cyclom-Y boards); * introduction of ioctls to: @@ -196,17 +195,17 @@ * - adjust the polling interval (Cyclades-Z); * * Revision 1.36.4.33 1997/06/27 19:00:00 ivan - * Fixes related to kernel version conditional + * Fixes related to kernel version conditional * compilation. - * + * * Revision 1.36.4.32 1997/06/14 19:30:00 ivan - * Compatibility issues between kernels 2.0.x and + * Compatibility issues between kernels 2.0.x and * 2.1.x (mainly related to clear_bit function). - * + * * Revision 1.36.4.31 1997/06/03 15:30:00 ivan - * Changes to define the memory window according to the + * Changes to define the memory window according to the * board type. - * + * * Revision 1.36.4.30 1997/05/16 15:30:00 daniel * Changes to support new cycladesZ boards. * @@ -624,7 +623,7 @@ #undef CY_PCI_DEBUG /* - * Include section + * Include section */ #include #include @@ -649,9 +648,9 @@ #include #include -#include +#include #include -#include +#include #include #include @@ -668,10 +667,10 @@ static void cy_send_xchar(struct tty_struct *tty, char ch); ((readl(&((struct RUNTIME_9060 __iomem *) \ ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0) -#define ISZLOADED(card) (((ZO_V1==readl(&((struct RUNTIME_9060 __iomem *) \ +#define ISZLOADED(card) (((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \ ((card).ctl_addr))->mail_box_0)) || \ Z_FPGA_CHECK(card)) && \ - (ZFIRM_ID==readl(&((struct FIRM_ID __iomem *) \ + (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \ ((card).base_addr+ID_ADDRESS))->signature))) #ifndef SERIAL_XMIT_SIZE @@ -809,12 +808,12 @@ static char baud_cor3[] = { /* receive threshold */ /* * The Cyclades driver implements HW flow control as any serial driver. - * The cyclades_port structure member rflow and the vector rflow_thr - * allows us to take advantage of a special feature in the CD1400 to avoid - * data loss even when the system interrupt latency is too high. These flags - * are to be used only with very special applications. Setting these flags - * requires the use of a special cable (DTR and RTS reversed). In the new - * CD1400-based boards (rev. 6.00 or later), there is no need for special + * The cyclades_port structure member rflow and the vector rflow_thr + * allows us to take advantage of a special feature in the CD1400 to avoid + * data loss even when the system interrupt latency is too high. These flags + * are to be used only with very special applications. Setting these flags + * requires the use of a special cable (DTR and RTS reversed). In the new + * CD1400-based boards (rev. 6.00 or later), there is no need for special * cables. */ @@ -841,14 +840,22 @@ static int cy_chip_offset[] = { 0x0000, #ifdef CONFIG_PCI static struct pci_device_id cy_pci_dev_id[] __devinitdata = { - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, /* PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) }, /* PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) }, /* 4Y PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) }, /* 4Y PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) }, /* 8Y PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) }, /* 8Y PCI > 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) }, /* Z PCI < 1Mb */ - { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) }, /* Z PCI > 1Mb */ + /* PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, + /* PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) }, + /* 4Y PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) }, + /* 4Y PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) }, + /* 8Y PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) }, + /* 8Y PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) }, + /* Z PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) }, + /* Z PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) }, { } /* end of table */ }; MODULE_DEVICE_TABLE(pci, cy_pci_dev_id); @@ -905,15 +912,14 @@ static inline int serial_paranoia_check(struct cyclades_port *info, This function is only called from inside spinlock-protected code. */ -static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index) +static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index) { unsigned int i; /* Check to see that the previous command has completed */ for (i = 0; i < 100; i++) { - if (readb(base_addr + (CyCCR << index)) == 0) { + if (readb(base_addr + (CyCCR << index)) == 0) break; - } udelay(10L); } /* if the CCR never cleared, the previous command @@ -929,7 +935,7 @@ static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index) #ifdef CONFIG_ISA /* ISA interrupt detection code */ -static unsigned detect_isa_irq(void __iomem * address) +static unsigned detect_isa_irq(void __iomem *address) { int irq; unsigned long irqs, flags; @@ -1038,7 +1044,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, if (info->flags & ASYNC_SAK) do_SAK(tty); } else if (data & CyFRAME) { - tty_insert_flip_char( tty, + tty_insert_flip_char(tty, readb(base_addr + (CyRDSR << index)), TTY_FRAME); info->icount.rx++; @@ -1320,7 +1326,8 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id) if (unlikely(cinfo == NULL)) { #ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",irq); + printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n", + irq); #endif return IRQ_NONE; /* spurious interrupt */ } @@ -1375,12 +1382,12 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id) /***********************************************************/ /********* End of block of Cyclom-Y specific code **********/ -/******** Start of block of Cyclades-Z specific code *********/ +/******** Start of block of Cyclades-Z specific code *******/ /***********************************************************/ static int cyz_fetch_msg(struct cyclades_card *cinfo, - __u32 * channel, __u8 * cmd, __u32 * param) + __u32 *channel, __u8 *cmd, __u32 *param) { struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; @@ -1388,9 +1395,8 @@ cyz_fetch_msg(struct cyclades_card *cinfo, unsigned long loc_doorbell; firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) { + if (!ISZLOADED(*cinfo)) return -1; - } zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -1418,9 +1424,9 @@ cyz_issue_cmd(struct cyclades_card *cinfo, unsigned int index; firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) { + if (!ISZLOADED(*cinfo)) return -1; - } + zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -1428,9 +1434,8 @@ cyz_issue_cmd(struct cyclades_card *cinfo, pci_doorbell = &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell; while ((readl(pci_doorbell) & 0xff) != 0) { - if (index++ == 1000) { + if (index++ == 1000) return (int)(readl(pci_doorbell) & 0xff); - } udelay(50L); } cy_writel(&board_ctrl->hcmd_channel, channel); @@ -1504,7 +1509,8 @@ static void cyz_handle_rx(struct cyclades_port *info, while (len--) { data = readb(cinfo->base_addr + rx_bufaddr + new_rx_get); - new_rx_get = (new_rx_get + 1)& (rx_bufsize - 1); + new_rx_get = (new_rx_get + 1) & + (rx_bufsize - 1); tty_insert_flip_char(tty, data, TTY_NORMAL); info->idle_stats.recv_bytes++; info->icount.rx++; @@ -1636,7 +1642,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) special_count = 0; delta_count = 0; info = &cinfo->ports[channel]; - if ((tty = info->tty) == NULL) + tty = info->tty; + if (tty == NULL) continue; ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); @@ -1732,7 +1739,8 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id) if (unlikely(cinfo == NULL)) { #ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",irq); + printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n", + irq); #endif return IRQ_NONE; /* spurious interrupt */ } @@ -1851,9 +1859,8 @@ static int startup(struct cyclades_port *info) } if (!info->type) { - if (info->tty) { + if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); - } free_page(page); goto errout; } @@ -1904,9 +1911,8 @@ static int startup(struct cyclades_port *info) readb(base_addr + (CySRER << index)) | CyRxData); info->flags |= ASYNC_INITIALIZED; - if (info->tty) { + if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags); - } info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; info->breakon = info->breakoff = 0; memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); @@ -1925,9 +1931,8 @@ static int startup(struct cyclades_port *info) base_addr = card->base_addr; firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) { + if (!ISZLOADED(*card)) return -ENODEV; - } zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); @@ -1990,9 +1995,8 @@ static int startup(struct cyclades_port *info) /* enable send, recv, modem !!! */ info->flags |= ASYNC_INITIALIZED; - if (info->tty) { + if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags); - } info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; info->breakon = info->breakoff = 0; memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); @@ -2061,9 +2065,8 @@ static void shutdown(struct cyclades_port *info) void __iomem *base_addr; int chip, channel, index; - if (!(info->flags & ASYNC_INITIALIZED)) { + if (!(info->flags & ASYNC_INITIALIZED)) return; - } card = info->card; channel = info->line - card->first_line; @@ -2105,9 +2108,8 @@ static void shutdown(struct cyclades_port *info) /* it may be appropriate to clear _XMIT at some later date (after testing)!!! */ - if (info->tty) { + if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); - } info->flags &= ~ASYNC_INITIALIZED; spin_unlock_irqrestore(&card->card_lock, flags); } else { @@ -2124,9 +2126,8 @@ static void shutdown(struct cyclades_port *info) #endif firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) { + if (!ISZLOADED(*card)) return; - } zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); @@ -2157,9 +2158,8 @@ static void shutdown(struct cyclades_port *info) #endif } - if (info->tty) { + if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); - } info->flags &= ~ASYNC_INITIALIZED; spin_unlock_irqrestore(&card->card_lock, flags); @@ -2204,7 +2204,8 @@ block_til_ready(struct tty_struct *tty, struct file *filp, * If non-blocking mode is set, then make the check up front * and then exit. */ - if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { info->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -2301,7 +2302,8 @@ block_til_ready(struct tty_struct *tty, struct file *filp, return -EINVAL; } - zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)& 0xfffff); + zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr) + & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = zfw_ctrl->ch_ctrl; @@ -2378,9 +2380,9 @@ static int cy_open(struct tty_struct *tty, struct file *filp) int retval; line = tty->index; - if ((tty->index < 0) || (NR_PORTS <= line)) { + if (tty->index < 0 || NR_PORTS <= line) return -ENODEV; - } + for (i = 0; i < NR_CARDS; i++) if (line < cy_card[i].first_line + cy_card[i].nports && line >= cy_card[i].first_line) @@ -2388,9 +2390,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp) if (i >= NR_CARDS) return -ENODEV; info = &cy_card[i].ports[line - cy_card[i].first_line]; - if (info->line < 0) { + if (info->line < 0) return -ENODEV; - } /* If the card's firmware hasn't been loaded, treat it as absent from the system. This @@ -2456,9 +2457,9 @@ static int cy_open(struct tty_struct *tty, struct file *filp) #endif tty->driver_data = info; info->tty = tty; - if (serial_paranoia_check(info, tty->name, "cy_open")) { + if (serial_paranoia_check(info, tty->name, "cy_open")) return -ENODEV; - } + #ifdef CY_DEBUG_OPEN printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, info->count); @@ -2482,9 +2483,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp) * Start up serial port */ retval = startup(info); - if (retval) { + if (retval) return retval; - } retval = block_til_ready(tty, filp, info); if (retval) { @@ -2591,9 +2591,8 @@ static void cy_close(struct tty_struct *tty, struct file *filp) printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line); #endif - if (!info || serial_paranoia_check(info, tty->name, "cy_close")) { + if (!info || serial_paranoia_check(info, tty->name, "cy_close")) return; - } card = info->card; @@ -2641,9 +2640,9 @@ static void cy_close(struct tty_struct *tty, struct file *filp) */ tty->closing = 1; spin_unlock_irqrestore(&card->card_lock, flags); - if (info->closing_wait != CY_CLOSING_WAIT_NONE) { + if (info->closing_wait != CY_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, info->closing_wait); - } + spin_lock_irqsave(&card->card_lock, flags); if (!IS_CYC_Z(*card)) { @@ -2657,15 +2656,16 @@ static void cy_close(struct tty_struct *tty, struct file *filp) cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) & ~CyRxData); if (info->flags & ASYNC_INITIALIZED) { - /* Waiting for on-board buffers to be empty before closing - the port */ + /* Waiting for on-board buffers to be empty before + closing the port */ spin_unlock_irqrestore(&card->card_lock, flags); cy_wait_until_sent(tty, info->timeout); spin_lock_irqsave(&card->card_lock, flags); } } else { #ifdef Z_WAKE - /* Waiting for on-board buffers to be empty before closing the port */ + /* Waiting for on-board buffers to be empty before closing + the port */ void __iomem *base_addr = card->base_addr; struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS; struct ZFW_CTRL __iomem *zfw_ctrl = @@ -2738,9 +2738,8 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line); #endif - if (serial_paranoia_check(info, tty->name, "cy_write")) { + if (serial_paranoia_check(info, tty->name, "cy_write")) return 0; - } if (!info->xmit_buf) return 0; @@ -2766,9 +2765,9 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) info->idle_stats.xmit_bytes += ret; info->idle_stats.xmit_idle = jiffies; - if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) start_xmit(info); - } + return ret; } /* cy_write */ @@ -2810,7 +2809,7 @@ static void cy_put_char(struct tty_struct *tty, unsigned char ch) /* * This routine is called by the kernel after it has written a - * series of characters to the tty device using put_char(). + * series of characters to the tty device using put_char(). */ static void cy_flush_chars(struct tty_struct *tty) { @@ -2950,12 +2949,12 @@ static void set_line_char(struct cyclades_port *info) int baud, baud_rate = 0; int i; - if (!info->tty || !info->tty->termios) { + if (!info->tty || !info->tty->termios) return; - } - if (info->line == -1) { + + if (info->line == -1) return; - } + cflag = info->tty->termios->c_cflag; iflag = info->tty->termios->c_iflag; @@ -2994,13 +2993,11 @@ static void set_line_char(struct cyclades_port *info) } /* find the baud index */ for (i = 0; i < 20; i++) { - if (baud == baud_table[i]) { + if (baud == baud_table[i]) break; - } } - if (i == 20) { + if (i == 20) i = 19; /* CD1400_MAX_SPEED */ - } if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { @@ -3059,18 +3056,16 @@ static void set_line_char(struct cyclades_port *info) info->cor1 = Cy_8_BITS; break; } - if (cflag & CSTOPB) { + if (cflag & CSTOPB) info->cor1 |= Cy_2_STOP; - } + if (cflag & PARENB) { - if (cflag & PARODD) { + if (cflag & PARODD) info->cor1 |= CyPARITY_O; - } else { + else info->cor1 |= CyPARITY_E; - } - } else { + } else info->cor1 |= CyPARITY_NONE; - } /* CTS flow control flag */ if (cflag & CRTSCTS) { @@ -3123,7 +3118,8 @@ static void set_line_char(struct cyclades_port *info) cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch | CyCOR3ch, index); - cy_writeb(base_addr + (CyCAR << index), (u_char) channel); /* !!! Is this needed? */ + /* !!! Is this needed? */ + cy_writeb(base_addr + (CyCAR << index), (u_char) channel); cy_writeb(base_addr + (CyRTPR << index), (info->default_timeout ? info->default_timeout : 0x02)); /* 10ms rx timeout */ @@ -3191,9 +3187,8 @@ static void set_line_char(struct cyclades_port *info) #endif } - if (info->tty) { + if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags); - } spin_unlock_irqrestore(&card->card_lock, flags); } else { @@ -3206,9 +3201,8 @@ static void set_line_char(struct cyclades_port *info) int retval; firm_id = card->base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) { + if (!ISZLOADED(*card)) return; - } zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); @@ -3268,14 +3262,12 @@ static void set_line_char(struct cyclades_port *info) readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); } if (cflag & PARENB) { - if (cflag & PARODD) { + if (cflag & PARODD) cy_writel(&ch_ctrl->comm_parity, C_PR_ODD); - } else { + else cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN); - } - } else { + } else cy_writel(&ch_ctrl->comm_parity, C_PR_NONE); - } /* CTS flow control flag */ if (cflag & CRTSCTS) { @@ -3305,11 +3297,10 @@ static void set_line_char(struct cyclades_port *info) } /* CD sensitivity */ - if (cflag & CLOCAL) { + if (cflag & CLOCAL) info->flags &= ~ASYNC_CHECK_CD; - } else { + else info->flags |= ASYNC_CHECK_CD; - } if (baud == 0) { /* baud rate is zero, turn off line */ cy_writel(&ch_ctrl->rs_control, @@ -3325,21 +3316,20 @@ static void set_line_char(struct cyclades_port *info) #endif } - retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM,0L); + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); if (retval != 0) { printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d " "was %x\n", info->line, retval); } - if (info->tty) { + if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags); - } } } /* set_line_char */ static int get_serial_info(struct cyclades_port *info, - struct serial_struct __user * retinfo) + struct serial_struct __user *retinfo) { struct serial_struct tmp; struct cyclades_card *cinfo = info->card; @@ -3363,7 +3353,7 @@ get_serial_info(struct cyclades_port *info, static int set_serial_info(struct cyclades_port *info, - struct serial_struct __user * new_info) + struct serial_struct __user *new_info) { struct serial_struct new_serial; struct cyclades_port old_info; @@ -3417,7 +3407,7 @@ check_and_exit: * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */ -static int get_lsr_info(struct cyclades_port *info, unsigned int __user * value) +static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) { struct cyclades_card *card; int chip, channel, index; @@ -3731,8 +3721,8 @@ static void cy_break(struct tty_struct *tty, int break_state) spin_unlock_irqrestore(&card->card_lock, flags); } /* cy_break */ -static int -get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon) +static int get_mon_info(struct cyclades_port *info, + struct cyclades_monitor __user *mon) { if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) @@ -3771,8 +3761,8 @@ static int set_threshold(struct cyclades_port *info, unsigned long value) return 0; } /* set_threshold */ -static int -get_threshold(struct cyclades_port *info, unsigned long __user * value) +static int get_threshold(struct cyclades_port *info, + unsigned long __user *value) { struct cyclades_card *card; void __iomem *base_addr; @@ -3793,15 +3783,15 @@ get_threshold(struct cyclades_port *info, unsigned long __user * value) return 0; } /* get_threshold */ -static int -set_default_threshold(struct cyclades_port *info, unsigned long value) +static int set_default_threshold(struct cyclades_port *info, + unsigned long value) { info->default_threshold = value & 0x0f; return 0; } /* set_default_threshold */ -static int -get_default_threshold(struct cyclades_port *info, unsigned long __user * value) +static int get_default_threshold(struct cyclades_port *info, + unsigned long __user *value) { return put_user(info->default_threshold, value); } /* get_default_threshold */ @@ -3828,7 +3818,8 @@ static int set_timeout(struct cyclades_port *info, unsigned long value) return 0; } /* set_timeout */ -static int get_timeout(struct cyclades_port *info, unsigned long __user * value) +static int get_timeout(struct cyclades_port *info, + unsigned long __user *value) { struct cyclades_card *card; void __iomem *base_addr; @@ -3855,8 +3846,8 @@ static int set_default_timeout(struct cyclades_port *info, unsigned long value) return 0; } /* set_default_timeout */ -static int -get_default_timeout(struct cyclades_port *info, unsigned long __user * value) +static int get_default_timeout(struct cyclades_port *info, + unsigned long __user *value) { return put_user(info->default_timeout, value); } /* get_default_timeout */ @@ -3941,7 +3932,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, break; #endif /* CONFIG_CYZ_INTR */ case CYSETWAIT: - info->closing_wait = (unsigned short)arg *HZ / 100; + info->closing_wait = (unsigned short)arg * HZ / 100; ret_val = 0; break; case CYGETWAIT: @@ -4118,9 +4109,8 @@ static void cy_throttle(struct tty_struct *tty) tty->ldisc.chars_in_buffer(tty), info->line); #endif - if (serial_paranoia_check(info, tty->name, "cy_throttle")) { + if (serial_paranoia_check(info, tty->name, "cy_throttle")) return; - } card = info->card; @@ -4174,12 +4164,11 @@ static void cy_unthrottle(struct tty_struct *tty) char buf[64]; printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n", - tty_name(tty, buf), tty->ldisc.chars_in_buffer(tty),info->line); + tty_name(tty, buf), tty_chars_in_buffer(tty), info->line); #endif - if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) { + if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) return; - } if (I_IXOFF(tty)) { if (info->x_char) @@ -4274,7 +4263,8 @@ static void cy_start(struct tty_struct *tty) base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); spin_lock_irqsave(&cinfo->card_lock, flags); - cy_writeb(base_addr + (CyCAR << index), (u_char) (channel & 0x0003)); /* index channel */ + cy_writeb(base_addr + (CyCAR << index), + (u_char) (channel & 0x0003)); /* index channel */ cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) | CyTxRdy); spin_unlock_irqrestore(&cinfo->card_lock, flags); @@ -4411,10 +4401,11 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) info->cor3 = 0x08; /* _very_ small rcv threshold */ chip_number = (port - cinfo->first_line) / 4; - if ((info->chip_rev = readb(cinfo->base_addr + - (cy_chip_offset[chip_number] << - index) + (CyGFRCR << index))) >= - CD1400_REV_J) { + info->chip_rev = readb(cinfo->base_addr + + (cy_chip_offset[chip_number] << index) + + (CyGFRCR << index)); + + if (info->chip_rev >= CD1400_REV_J) { /* It is a CD1400 rev. J or later */ info->tbpr = baud_bpr_60[13]; /* Tx BPR */ info->tco = baud_co_60[13]; /* Tx CO */ @@ -4459,7 +4450,8 @@ static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr, /* Cy_ClrIntr is 0x1800 */ udelay(500L); - for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; chip_number++) { + for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; + chip_number++) { base_addr = true_base_addr + (cy_chip_offset[chip_number] << index); mdelay(1); @@ -4560,9 +4552,8 @@ static int __init cy_detect_isa(void) /* scan the address table probing for Cyclom-Y/ISA boards */ for (i = 0; i < NR_ISA_ADDRS; i++) { unsigned int isa_address = cy_isa_addresses[i]; - if (isa_address == 0x0000) { + if (isa_address == 0x0000) return nboard; - } /* probe for CD1400... */ cy_isa_address = ioremap(isa_address, CyISA_Ywin); @@ -4852,12 +4843,10 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, if (mailbox != 0) { /* set window to last 512K of RAM */ cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE); - //sleep(1); for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) cy_writeb(tmp, 255); /* set window to beginning of RAM */ cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); - //sleep(1); } retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL); @@ -5387,7 +5376,8 @@ static void __exit cy_cleanup_module(void) del_timer_sync(&cyz_timerlist); #endif /* CONFIG_CYZ_INTR */ - if ((e1 = tty_unregister_driver(cy_serial_driver))) + e1 = tty_unregister_driver(cy_serial_driver); + if (e1) printk(KERN_ERR "failed to unregister Cyclades serial " "driver(%d)\n", e1); -- 2.39.5