From 140a74802894e9db57e5cd77ccff77e590ece5f3 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 25 Oct 2007 13:57:58 -0700 Subject: [PATCH] e1000e: Re-enable SECRC - crc stripping This workaround code performed software stripping instead of the hardware which can do it much faster. None of the e1000e target hardware has issues with this feature and should work fine. This gives us some performance back on receive, and removes some kludging stripping the 4 bytes. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/netdev.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index e87ed31335..03fcc70e01 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -494,10 +494,6 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, goto next_desc; } - /* adjust length to remove Ethernet CRC */ - length -= 4; - - /* probably a little skewed due to removing CRC */ total_rx_bytes += length; total_rx_packets++; @@ -964,8 +960,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ); pci_dma_sync_single_for_device(pdev, ps_page->dma, PAGE_SIZE, PCI_DMA_FROMDEVICE); - /* remove the CRC */ - l1 -= 4; + skb_put(skb, l1); goto copydone; } /* if */ @@ -987,10 +982,6 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb->truesize += length; } - /* strip the ethernet crc, problem is we're using pages now so - * this whole operation can get a little cpu intensive */ - pskb_trim(skb, skb->len - 4); - copydone: total_rx_bytes += skb->len; total_rx_packets++; @@ -2034,9 +2025,11 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) ew32(RFCTL, rfctl); - /* disable the stripping of CRC because it breaks - * BMC firmware connected over SMBUS */ - rctl |= E1000_RCTL_DTYP_PS /* | E1000_RCTL_SECRC */; + /* Enable Packet split descriptors */ + rctl |= E1000_RCTL_DTYP_PS; + + /* Enable hardware CRC frame stripping */ + rctl |= E1000_RCTL_SECRC; psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT; -- 2.39.5