From 1394f03221790a988afc3e4b3cb79f2e477246a9 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Sun, 6 May 2007 14:50:22 -0700 Subject: [PATCH] blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu Signed-off-by: Mariusz Kozlowski Signed-off-by: Aubrey Li Signed-off-by: Jie Zhang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/blackfin/00-INDEX | 11 + Documentation/blackfin/Filesystems | 169 ++ Documentation/blackfin/cache-lock.txt | 48 + Documentation/blackfin/cachefeatures.txt | 65 + MAINTAINERS | 38 + arch/blackfin/Kconfig | 989 +++++++ arch/blackfin/Makefile | 80 + arch/blackfin/boot/Makefile | 27 + arch/blackfin/defconfig | 1314 +++++++++ arch/blackfin/kernel/Makefile | 14 + arch/blackfin/kernel/asm-offsets.c | 136 + arch/blackfin/kernel/bfin_dma_5xx.c | 742 +++++ arch/blackfin/kernel/bfin_gpio.c | 637 +++++ arch/blackfin/kernel/bfin_ksyms.c | 119 + arch/blackfin/kernel/dma-mapping.c | 183 ++ arch/blackfin/kernel/dualcore_test.c | 49 + arch/blackfin/kernel/entry.S | 94 + arch/blackfin/kernel/flat.c | 101 + arch/blackfin/kernel/init_task.c | 60 + arch/blackfin/kernel/irqchip.c | 147 + arch/blackfin/kernel/module.c | 429 +++ arch/blackfin/kernel/process.c | 394 +++ arch/blackfin/kernel/ptrace.c | 430 +++ arch/blackfin/kernel/setup.c | 902 ++++++ arch/blackfin/kernel/signal.c | 356 +++ arch/blackfin/kernel/sys_bfin.c | 115 + arch/blackfin/kernel/time.c | 326 +++ arch/blackfin/kernel/traps.c | 649 +++++ arch/blackfin/kernel/vmlinux.lds.S | 228 ++ arch/blackfin/lib/Makefile | 11 + arch/blackfin/lib/ashldi3.c | 58 + arch/blackfin/lib/ashrdi3.c | 59 + arch/blackfin/lib/checksum.c | 140 + arch/blackfin/lib/divsi3.S | 216 ++ arch/blackfin/lib/gcclib.h | 47 + arch/blackfin/lib/ins.S | 69 + arch/blackfin/lib/lshrdi3.c | 72 + arch/blackfin/lib/memchr.S | 70 + arch/blackfin/lib/memcmp.S | 110 + arch/blackfin/lib/memcpy.S | 142 + arch/blackfin/lib/memmove.S | 103 + arch/blackfin/lib/memset.S | 109 + arch/blackfin/lib/modsi3.S | 79 + arch/blackfin/lib/muldi3.c | 99 + arch/blackfin/lib/outs.S | 62 + arch/blackfin/lib/smulsi3_highpart.S | 30 + arch/blackfin/lib/strcmp.c | 11 + arch/blackfin/lib/strcpy.c | 11 + arch/blackfin/lib/strncmp.c | 11 + arch/blackfin/lib/strncpy.c | 11 + arch/blackfin/lib/udivsi3.S | 298 ++ arch/blackfin/lib/umodsi3.S | 66 + arch/blackfin/lib/umulsi3_highpart.S | 23 + arch/blackfin/mach-bf533/Kconfig | 92 + arch/blackfin/mach-bf533/Makefile | 9 + arch/blackfin/mach-bf533/boards/Makefile | 8 + arch/blackfin/mach-bf533/boards/cm_bf533.c | 267 ++ arch/blackfin/mach-bf533/boards/ezkit.c | 224 ++ .../mach-bf533/boards/generic_board.c | 95 + arch/blackfin/mach-bf533/boards/stamp.c | 321 +++ arch/blackfin/mach-bf533/cpu.c | 161 ++ arch/blackfin/mach-bf533/head.S | 774 +++++ arch/blackfin/mach-bf533/ints-priority.c | 65 + arch/blackfin/mach-bf537/Kconfig | 141 + arch/blackfin/mach-bf537/Makefile | 9 + arch/blackfin/mach-bf537/boards/Makefile | 9 + arch/blackfin/mach-bf537/boards/cm_bf537.c | 364 +++ arch/blackfin/mach-bf537/boards/eth_mac.c | 51 + .../mach-bf537/boards/generic_board.c | 445 +++ arch/blackfin/mach-bf537/boards/led.S | 183 ++ arch/blackfin/mach-bf537/boards/pnav10.c | 523 ++++ arch/blackfin/mach-bf537/boards/stamp.c | 615 ++++ arch/blackfin/mach-bf537/cpu.c | 161 ++ arch/blackfin/mach-bf537/head.S | 602 ++++ arch/blackfin/mach-bf537/ints-priority.c | 74 + arch/blackfin/mach-bf561/Kconfig | 222 ++ arch/blackfin/mach-bf561/Makefile | 9 + arch/blackfin/mach-bf561/boards/Makefile | 7 + arch/blackfin/mach-bf561/boards/cm_bf561.c | 289 ++ arch/blackfin/mach-bf561/boards/ezkit.c | 147 + .../mach-bf561/boards/generic_board.c | 82 + arch/blackfin/mach-bf561/coreb.c | 402 +++ arch/blackfin/mach-bf561/head.S | 512 ++++ arch/blackfin/mach-bf561/ints-priority.c | 108 + arch/blackfin/mach-common/Makefile | 12 + arch/blackfin/mach-common/cache.S | 253 ++ arch/blackfin/mach-common/cacheinit.S | 137 + arch/blackfin/mach-common/cplbhdlr.S | 130 + arch/blackfin/mach-common/cplbinfo.c | 211 ++ arch/blackfin/mach-common/cplbmgr.S | 607 ++++ arch/blackfin/mach-common/dpmc.S | 418 +++ arch/blackfin/mach-common/entry.S | 1207 ++++++++ arch/blackfin/mach-common/interrupt.S | 253 ++ arch/blackfin/mach-common/ints-priority-dc.c | 476 ++++ arch/blackfin/mach-common/ints-priority-sc.c | 577 ++++ arch/blackfin/mach-common/irqpanic.c | 194 ++ arch/blackfin/mach-common/lock.S | 204 ++ arch/blackfin/mach-common/pm.c | 181 ++ arch/blackfin/mm/Makefile | 5 + arch/blackfin/mm/blackfin_sram.c | 540 ++++ arch/blackfin/mm/blackfin_sram.h | 38 + arch/blackfin/mm/init.c | 208 ++ arch/blackfin/oprofile/Kconfig | 29 + arch/blackfin/oprofile/Makefile | 14 + arch/blackfin/oprofile/common.c | 168 ++ arch/blackfin/oprofile/op_blackfin.h | 98 + arch/blackfin/oprofile/op_model_bf533.c | 161 ++ arch/blackfin/oprofile/timer_int.c | 74 + fs/Kconfig.binfmt | 2 +- include/asm-blackfin/Kbuild | 1 + include/asm-blackfin/a.out.h | 25 + include/asm-blackfin/atomic.h | 144 + include/asm-blackfin/auxvec.h | 4 + include/asm-blackfin/bf5xx_timers.h | 209 ++ include/asm-blackfin/bfin-global.h | 120 + include/asm-blackfin/bfin5xx_spi.h | 170 ++ include/asm-blackfin/bfin_simple_timer.h | 13 + include/asm-blackfin/bfin_sport.h | 175 ++ include/asm-blackfin/bitops.h | 213 ++ include/asm-blackfin/blackfin.h | 81 + include/asm-blackfin/bug.h | 4 + include/asm-blackfin/bugs.h | 16 + include/asm-blackfin/byteorder.h | 48 + include/asm-blackfin/cache.h | 29 + include/asm-blackfin/cacheflush.h | 90 + include/asm-blackfin/checksum.h | 101 + include/asm-blackfin/cplb.h | 51 + include/asm-blackfin/cplbinit.h | 203 ++ include/asm-blackfin/cpumask.h | 6 + include/asm-blackfin/cputime.h | 6 + include/asm-blackfin/current.h | 23 + include/asm-blackfin/delay.h | 44 + include/asm-blackfin/device.h | 7 + include/asm-blackfin/div64.h | 1 + include/asm-blackfin/dma-mapping.h | 66 + include/asm-blackfin/dma.h | 188 ++ include/asm-blackfin/dpmc.h | 70 + include/asm-blackfin/elf.h | 127 + include/asm-blackfin/emergency-restart.h | 6 + include/asm-blackfin/entry.h | 56 + include/asm-blackfin/errno.h | 6 + include/asm-blackfin/fcntl.h | 13 + include/asm-blackfin/flat.h | 58 + include/asm-blackfin/futex.h | 6 + include/asm-blackfin/gpio.h | 367 +++ include/asm-blackfin/hardirq.h | 41 + include/asm-blackfin/hw_irq.h | 6 + include/asm-blackfin/ide.h | 32 + include/asm-blackfin/io.h | 207 ++ include/asm-blackfin/ioctl.h | 1 + include/asm-blackfin/ioctls.h | 82 + include/asm-blackfin/ipc.h | 1 + include/asm-blackfin/ipcbuf.h | 30 + include/asm-blackfin/irq.h | 70 + include/asm-blackfin/irq_handler.h | 22 + include/asm-blackfin/irq_regs.h | 1 + include/asm-blackfin/kdebug.h | 1 + include/asm-blackfin/kmap_types.h | 21 + include/asm-blackfin/l1layout.h | 31 + include/asm-blackfin/linkage.h | 7 + include/asm-blackfin/local.h | 6 + include/asm-blackfin/mach-bf533/anomaly.h | 175 ++ include/asm-blackfin/mach-bf533/bf533.h | 306 ++ .../asm-blackfin/mach-bf533/bfin_serial_5xx.h | 108 + include/asm-blackfin/mach-bf533/blackfin.h | 45 + include/asm-blackfin/mach-bf533/cdefBF532.h | 706 +++++ include/asm-blackfin/mach-bf533/defBF532.h | 1175 ++++++++ include/asm-blackfin/mach-bf533/dma.h | 54 + include/asm-blackfin/mach-bf533/irq.h | 177 ++ include/asm-blackfin/mach-bf533/mem_init.h | 316 +++ include/asm-blackfin/mach-bf533/mem_map.h | 168 ++ include/asm-blackfin/mach-bf537/anomaly.h | 120 + include/asm-blackfin/mach-bf537/bf537.h | 287 ++ .../asm-blackfin/mach-bf537/bfin_serial_5xx.h | 147 + include/asm-blackfin/mach-bf537/blackfin.h | 430 +++ include/asm-blackfin/mach-bf537/cdefBF534.h | 1823 ++++++++++++ include/asm-blackfin/mach-bf537/cdefBF537.h | 209 ++ include/asm-blackfin/mach-bf537/defBF534.h | 2501 +++++++++++++++++ include/asm-blackfin/mach-bf537/defBF537.h | 404 +++ include/asm-blackfin/mach-bf537/dma.h | 55 + include/asm-blackfin/mach-bf537/irq.h | 219 ++ include/asm-blackfin/mach-bf537/mem_init.h | 330 +++ include/asm-blackfin/mach-bf537/mem_map.h | 175 ++ include/asm-blackfin/mach-bf561/anomaly.h | 184 ++ include/asm-blackfin/mach-bf561/bf561.h | 408 +++ .../asm-blackfin/mach-bf561/bfin_serial_5xx.h | 108 + include/asm-blackfin/mach-bf561/blackfin.h | 52 + include/asm-blackfin/mach-bf561/cdefBF561.h | 1543 ++++++++++ include/asm-blackfin/mach-bf561/defBF561.h | 1717 +++++++++++ include/asm-blackfin/mach-bf561/dma.h | 35 + include/asm-blackfin/mach-bf561/irq.h | 450 +++ include/asm-blackfin/mach-bf561/mem_init.h | 322 +++ include/asm-blackfin/mach-bf561/mem_map.h | 75 + .../mach-common/cdef_LPBlackfin.h | 471 ++++ include/asm-blackfin/mach-common/context.S | 350 +++ .../asm-blackfin/mach-common/def_LPBlackfin.h | 691 +++++ include/asm-blackfin/macros.h | 95 + include/asm-blackfin/mem_map.h | 12 + include/asm-blackfin/mman.h | 45 + include/asm-blackfin/mmu.h | 30 + include/asm-blackfin/mmu_context.h | 129 + include/asm-blackfin/module.h | 19 + include/asm-blackfin/msgbuf.h | 31 + include/asm-blackfin/mutex.h | 9 + include/asm-blackfin/namei.h | 19 + include/asm-blackfin/page.h | 89 + include/asm-blackfin/page_offset.h | 6 + include/asm-blackfin/param.h | 22 + include/asm-blackfin/pci.h | 148 + include/asm-blackfin/percpu.h | 6 + include/asm-blackfin/pgalloc.h | 8 + include/asm-blackfin/pgtable.h | 96 + include/asm-blackfin/poll.h | 24 + include/asm-blackfin/posix_types.h | 65 + include/asm-blackfin/processor.h | 130 + include/asm-blackfin/ptrace.h | 166 ++ include/asm-blackfin/resource.h | 6 + include/asm-blackfin/scatterlist.h | 26 + include/asm-blackfin/sections.h | 7 + include/asm-blackfin/segment.h | 7 + include/asm-blackfin/semaphore-helper.h | 82 + include/asm-blackfin/semaphore.h | 106 + include/asm-blackfin/sembuf.h | 25 + include/asm-blackfin/setup.h | 17 + include/asm-blackfin/shmbuf.h | 42 + include/asm-blackfin/shmparam.h | 6 + include/asm-blackfin/sigcontext.h | 55 + include/asm-blackfin/siginfo.h | 35 + include/asm-blackfin/signal.h | 160 ++ include/asm-blackfin/socket.h | 53 + include/asm-blackfin/sockios.h | 13 + include/asm-blackfin/spinlock.h | 6 + include/asm-blackfin/stat.h | 63 + include/asm-blackfin/statfs.h | 6 + include/asm-blackfin/string.h | 104 + include/asm-blackfin/system.h | 250 ++ include/asm-blackfin/termbits.h | 184 ++ include/asm-blackfin/termios.h | 106 + include/asm-blackfin/thread_info.h | 143 + include/asm-blackfin/timex.h | 18 + include/asm-blackfin/tlb.h | 16 + include/asm-blackfin/tlbflush.h | 62 + include/asm-blackfin/topology.h | 6 + include/asm-blackfin/traps.h | 75 + include/asm-blackfin/types.h | 66 + include/asm-blackfin/uaccess.h | 271 ++ include/asm-blackfin/ucontext.h | 17 + include/asm-blackfin/unaligned.h | 6 + include/asm-blackfin/unistd.h | 382 +++ include/asm-blackfin/user.h | 89 + include/linux/elf-em.h | 1 + include/linux/spi/ad7877.h | 24 + include/linux/usb_sl811.h | 26 + init/Kconfig | 2 +- lib/Kconfig.debug | 4 +- scripts/genksyms/genksyms.c | 3 +- scripts/mod/mk_elfconfig.c | 3 +- 257 files changed, 47285 insertions(+), 6 deletions(-) create mode 100644 Documentation/blackfin/00-INDEX create mode 100644 Documentation/blackfin/Filesystems create mode 100644 Documentation/blackfin/cache-lock.txt create mode 100644 Documentation/blackfin/cachefeatures.txt create mode 100644 arch/blackfin/Kconfig create mode 100644 arch/blackfin/Makefile create mode 100644 arch/blackfin/boot/Makefile create mode 100644 arch/blackfin/defconfig create mode 100644 arch/blackfin/kernel/Makefile create mode 100644 arch/blackfin/kernel/asm-offsets.c create mode 100644 arch/blackfin/kernel/bfin_dma_5xx.c create mode 100644 arch/blackfin/kernel/bfin_gpio.c create mode 100644 arch/blackfin/kernel/bfin_ksyms.c create mode 100644 arch/blackfin/kernel/dma-mapping.c create mode 100644 arch/blackfin/kernel/dualcore_test.c create mode 100644 arch/blackfin/kernel/entry.S create mode 100644 arch/blackfin/kernel/flat.c create mode 100644 arch/blackfin/kernel/init_task.c create mode 100644 arch/blackfin/kernel/irqchip.c create mode 100644 arch/blackfin/kernel/module.c create mode 100644 arch/blackfin/kernel/process.c create mode 100644 arch/blackfin/kernel/ptrace.c create mode 100644 arch/blackfin/kernel/setup.c create mode 100644 arch/blackfin/kernel/signal.c create mode 100644 arch/blackfin/kernel/sys_bfin.c create mode 100644 arch/blackfin/kernel/time.c create mode 100644 arch/blackfin/kernel/traps.c create mode 100644 arch/blackfin/kernel/vmlinux.lds.S create mode 100644 arch/blackfin/lib/Makefile create mode 100644 arch/blackfin/lib/ashldi3.c create mode 100644 arch/blackfin/lib/ashrdi3.c create mode 100644 arch/blackfin/lib/checksum.c create mode 100644 arch/blackfin/lib/divsi3.S create mode 100644 arch/blackfin/lib/gcclib.h create mode 100644 arch/blackfin/lib/ins.S create mode 100644 arch/blackfin/lib/lshrdi3.c create mode 100644 arch/blackfin/lib/memchr.S create mode 100644 arch/blackfin/lib/memcmp.S create mode 100644 arch/blackfin/lib/memcpy.S create mode 100644 arch/blackfin/lib/memmove.S create mode 100644 arch/blackfin/lib/memset.S create mode 100644 arch/blackfin/lib/modsi3.S create mode 100644 arch/blackfin/lib/muldi3.c create mode 100644 arch/blackfin/lib/outs.S create mode 100644 arch/blackfin/lib/smulsi3_highpart.S create mode 100644 arch/blackfin/lib/strcmp.c create mode 100644 arch/blackfin/lib/strcpy.c create mode 100644 arch/blackfin/lib/strncmp.c create mode 100644 arch/blackfin/lib/strncpy.c create mode 100644 arch/blackfin/lib/udivsi3.S create mode 100644 arch/blackfin/lib/umodsi3.S create mode 100644 arch/blackfin/lib/umulsi3_highpart.S create mode 100644 arch/blackfin/mach-bf533/Kconfig create mode 100644 arch/blackfin/mach-bf533/Makefile create mode 100644 arch/blackfin/mach-bf533/boards/Makefile create mode 100644 arch/blackfin/mach-bf533/boards/cm_bf533.c create mode 100644 arch/blackfin/mach-bf533/boards/ezkit.c create mode 100644 arch/blackfin/mach-bf533/boards/generic_board.c create mode 100644 arch/blackfin/mach-bf533/boards/stamp.c create mode 100644 arch/blackfin/mach-bf533/cpu.c create mode 100644 arch/blackfin/mach-bf533/head.S create mode 100644 arch/blackfin/mach-bf533/ints-priority.c create mode 100644 arch/blackfin/mach-bf537/Kconfig create mode 100644 arch/blackfin/mach-bf537/Makefile create mode 100644 arch/blackfin/mach-bf537/boards/Makefile create mode 100644 arch/blackfin/mach-bf537/boards/cm_bf537.c create mode 100644 arch/blackfin/mach-bf537/boards/eth_mac.c create mode 100644 arch/blackfin/mach-bf537/boards/generic_board.c create mode 100644 arch/blackfin/mach-bf537/boards/led.S create mode 100644 arch/blackfin/mach-bf537/boards/pnav10.c create mode 100644 arch/blackfin/mach-bf537/boards/stamp.c create mode 100644 arch/blackfin/mach-bf537/cpu.c create mode 100644 arch/blackfin/mach-bf537/head.S create mode 100644 arch/blackfin/mach-bf537/ints-priority.c create mode 100644 arch/blackfin/mach-bf561/Kconfig create mode 100644 arch/blackfin/mach-bf561/Makefile create mode 100644 arch/blackfin/mach-bf561/boards/Makefile create mode 100644 arch/blackfin/mach-bf561/boards/cm_bf561.c create mode 100644 arch/blackfin/mach-bf561/boards/ezkit.c create mode 100644 arch/blackfin/mach-bf561/boards/generic_board.c create mode 100644 arch/blackfin/mach-bf561/coreb.c create mode 100644 arch/blackfin/mach-bf561/head.S create mode 100644 arch/blackfin/mach-bf561/ints-priority.c create mode 100644 arch/blackfin/mach-common/Makefile create mode 100644 arch/blackfin/mach-common/cache.S create mode 100644 arch/blackfin/mach-common/cacheinit.S create mode 100644 arch/blackfin/mach-common/cplbhdlr.S create mode 100644 arch/blackfin/mach-common/cplbinfo.c create mode 100644 arch/blackfin/mach-common/cplbmgr.S create mode 100644 arch/blackfin/mach-common/dpmc.S create mode 100644 arch/blackfin/mach-common/entry.S create mode 100644 arch/blackfin/mach-common/interrupt.S create mode 100644 arch/blackfin/mach-common/ints-priority-dc.c create mode 100644 arch/blackfin/mach-common/ints-priority-sc.c create mode 100644 arch/blackfin/mach-common/irqpanic.c create mode 100644 arch/blackfin/mach-common/lock.S create mode 100644 arch/blackfin/mach-common/pm.c create mode 100644 arch/blackfin/mm/Makefile create mode 100644 arch/blackfin/mm/blackfin_sram.c create mode 100644 arch/blackfin/mm/blackfin_sram.h create mode 100644 arch/blackfin/mm/init.c create mode 100644 arch/blackfin/oprofile/Kconfig create mode 100644 arch/blackfin/oprofile/Makefile create mode 100644 arch/blackfin/oprofile/common.c create mode 100644 arch/blackfin/oprofile/op_blackfin.h create mode 100644 arch/blackfin/oprofile/op_model_bf533.c create mode 100644 arch/blackfin/oprofile/timer_int.c create mode 100644 include/asm-blackfin/Kbuild create mode 100644 include/asm-blackfin/a.out.h create mode 100644 include/asm-blackfin/atomic.h create mode 100644 include/asm-blackfin/auxvec.h create mode 100644 include/asm-blackfin/bf5xx_timers.h create mode 100644 include/asm-blackfin/bfin-global.h create mode 100644 include/asm-blackfin/bfin5xx_spi.h create mode 100644 include/asm-blackfin/bfin_simple_timer.h create mode 100644 include/asm-blackfin/bfin_sport.h create mode 100644 include/asm-blackfin/bitops.h create mode 100644 include/asm-blackfin/blackfin.h create mode 100644 include/asm-blackfin/bug.h create mode 100644 include/asm-blackfin/bugs.h create mode 100644 include/asm-blackfin/byteorder.h create mode 100644 include/asm-blackfin/cache.h create mode 100644 include/asm-blackfin/cacheflush.h create mode 100644 include/asm-blackfin/checksum.h create mode 100644 include/asm-blackfin/cplb.h create mode 100644 include/asm-blackfin/cplbinit.h create mode 100644 include/asm-blackfin/cpumask.h create mode 100644 include/asm-blackfin/cputime.h create mode 100644 include/asm-blackfin/current.h create mode 100644 include/asm-blackfin/delay.h create mode 100644 include/asm-blackfin/device.h create mode 100644 include/asm-blackfin/div64.h create mode 100644 include/asm-blackfin/dma-mapping.h create mode 100644 include/asm-blackfin/dma.h create mode 100644 include/asm-blackfin/dpmc.h create mode 100644 include/asm-blackfin/elf.h create mode 100644 include/asm-blackfin/emergency-restart.h create mode 100644 include/asm-blackfin/entry.h create mode 100644 include/asm-blackfin/errno.h create mode 100644 include/asm-blackfin/fcntl.h create mode 100644 include/asm-blackfin/flat.h create mode 100644 include/asm-blackfin/futex.h create mode 100644 include/asm-blackfin/gpio.h create mode 100644 include/asm-blackfin/hardirq.h create mode 100644 include/asm-blackfin/hw_irq.h create mode 100644 include/asm-blackfin/ide.h create mode 100644 include/asm-blackfin/io.h create mode 100644 include/asm-blackfin/ioctl.h create mode 100644 include/asm-blackfin/ioctls.h create mode 100644 include/asm-blackfin/ipc.h create mode 100644 include/asm-blackfin/ipcbuf.h create mode 100644 include/asm-blackfin/irq.h create mode 100644 include/asm-blackfin/irq_handler.h create mode 100644 include/asm-blackfin/irq_regs.h create mode 100644 include/asm-blackfin/kdebug.h create mode 100644 include/asm-blackfin/kmap_types.h create mode 100644 include/asm-blackfin/l1layout.h create mode 100644 include/asm-blackfin/linkage.h create mode 100644 include/asm-blackfin/local.h create mode 100644 include/asm-blackfin/mach-bf533/anomaly.h create mode 100644 include/asm-blackfin/mach-bf533/bf533.h create mode 100644 include/asm-blackfin/mach-bf533/bfin_serial_5xx.h create mode 100644 include/asm-blackfin/mach-bf533/blackfin.h create mode 100644 include/asm-blackfin/mach-bf533/cdefBF532.h create mode 100644 include/asm-blackfin/mach-bf533/defBF532.h create mode 100644 include/asm-blackfin/mach-bf533/dma.h create mode 100644 include/asm-blackfin/mach-bf533/irq.h create mode 100644 include/asm-blackfin/mach-bf533/mem_init.h create mode 100644 include/asm-blackfin/mach-bf533/mem_map.h create mode 100644 include/asm-blackfin/mach-bf537/anomaly.h create mode 100644 include/asm-blackfin/mach-bf537/bf537.h create mode 100644 include/asm-blackfin/mach-bf537/bfin_serial_5xx.h create mode 100644 include/asm-blackfin/mach-bf537/blackfin.h create mode 100644 include/asm-blackfin/mach-bf537/cdefBF534.h create mode 100644 include/asm-blackfin/mach-bf537/cdefBF537.h create mode 100644 include/asm-blackfin/mach-bf537/defBF534.h create mode 100644 include/asm-blackfin/mach-bf537/defBF537.h create mode 100644 include/asm-blackfin/mach-bf537/dma.h create mode 100644 include/asm-blackfin/mach-bf537/irq.h create mode 100644 include/asm-blackfin/mach-bf537/mem_init.h create mode 100644 include/asm-blackfin/mach-bf537/mem_map.h create mode 100644 include/asm-blackfin/mach-bf561/anomaly.h create mode 100644 include/asm-blackfin/mach-bf561/bf561.h create mode 100644 include/asm-blackfin/mach-bf561/bfin_serial_5xx.h create mode 100644 include/asm-blackfin/mach-bf561/blackfin.h create mode 100644 include/asm-blackfin/mach-bf561/cdefBF561.h create mode 100644 include/asm-blackfin/mach-bf561/defBF561.h create mode 100644 include/asm-blackfin/mach-bf561/dma.h create mode 100644 include/asm-blackfin/mach-bf561/irq.h create mode 100644 include/asm-blackfin/mach-bf561/mem_init.h create mode 100644 include/asm-blackfin/mach-bf561/mem_map.h create mode 100644 include/asm-blackfin/mach-common/cdef_LPBlackfin.h create mode 100644 include/asm-blackfin/mach-common/context.S create mode 100644 include/asm-blackfin/mach-common/def_LPBlackfin.h create mode 100644 include/asm-blackfin/macros.h create mode 100644 include/asm-blackfin/mem_map.h create mode 100644 include/asm-blackfin/mman.h create mode 100644 include/asm-blackfin/mmu.h create mode 100644 include/asm-blackfin/mmu_context.h create mode 100644 include/asm-blackfin/module.h create mode 100644 include/asm-blackfin/msgbuf.h create mode 100644 include/asm-blackfin/mutex.h create mode 100644 include/asm-blackfin/namei.h create mode 100644 include/asm-blackfin/page.h create mode 100644 include/asm-blackfin/page_offset.h create mode 100644 include/asm-blackfin/param.h create mode 100644 include/asm-blackfin/pci.h create mode 100644 include/asm-blackfin/percpu.h create mode 100644 include/asm-blackfin/pgalloc.h create mode 100644 include/asm-blackfin/pgtable.h create mode 100644 include/asm-blackfin/poll.h create mode 100644 include/asm-blackfin/posix_types.h create mode 100644 include/asm-blackfin/processor.h create mode 100644 include/asm-blackfin/ptrace.h create mode 100644 include/asm-blackfin/resource.h create mode 100644 include/asm-blackfin/scatterlist.h create mode 100644 include/asm-blackfin/sections.h create mode 100644 include/asm-blackfin/segment.h create mode 100644 include/asm-blackfin/semaphore-helper.h create mode 100644 include/asm-blackfin/semaphore.h create mode 100644 include/asm-blackfin/sembuf.h create mode 100644 include/asm-blackfin/setup.h create mode 100644 include/asm-blackfin/shmbuf.h create mode 100644 include/asm-blackfin/shmparam.h create mode 100644 include/asm-blackfin/sigcontext.h create mode 100644 include/asm-blackfin/siginfo.h create mode 100644 include/asm-blackfin/signal.h create mode 100644 include/asm-blackfin/socket.h create mode 100644 include/asm-blackfin/sockios.h create mode 100644 include/asm-blackfin/spinlock.h create mode 100644 include/asm-blackfin/stat.h create mode 100644 include/asm-blackfin/statfs.h create mode 100644 include/asm-blackfin/string.h create mode 100644 include/asm-blackfin/system.h create mode 100644 include/asm-blackfin/termbits.h create mode 100644 include/asm-blackfin/termios.h create mode 100644 include/asm-blackfin/thread_info.h create mode 100644 include/asm-blackfin/timex.h create mode 100644 include/asm-blackfin/tlb.h create mode 100644 include/asm-blackfin/tlbflush.h create mode 100644 include/asm-blackfin/topology.h create mode 100644 include/asm-blackfin/traps.h create mode 100644 include/asm-blackfin/types.h create mode 100644 include/asm-blackfin/uaccess.h create mode 100644 include/asm-blackfin/ucontext.h create mode 100644 include/asm-blackfin/unaligned.h create mode 100644 include/asm-blackfin/unistd.h create mode 100644 include/asm-blackfin/user.h create mode 100644 include/linux/spi/ad7877.h create mode 100644 include/linux/usb_sl811.h diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX new file mode 100644 index 0000000000..7cb3b356b2 --- /dev/null +++ b/Documentation/blackfin/00-INDEX @@ -0,0 +1,11 @@ +00-INDEX + - This file + +cache-lock.txt + - HOWTO for blackfin cache locking. + +cachefeatures.txt + - Supported cache features. + +Filesystems + - Requirements for mounting the root file system. diff --git a/Documentation/blackfin/Filesystems b/Documentation/blackfin/Filesystems new file mode 100644 index 0000000000..51260a1b80 --- /dev/null +++ b/Documentation/blackfin/Filesystems @@ -0,0 +1,169 @@ +/* + * File: Documentation/blackfin/Filesystems + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Rev: $Id: Filesystems 2384 2006-11-01 04:12:43Z magicyang $ + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + */ + + How to mount the root file system in uClinux/Blackfin + ----------------------------------------------------- + +1 Mounting EXT3 File system. + ------------------------ + + Creating an EXT3 File system for uClinux/Blackfin: + + +Please follow the steps to form the EXT3 File system and mount the same as root +file system. + +a Make an ext3 file system as large as you want the final root file + system. + + mkfs.ext3 /dev/ram0 + +b Mount this Empty file system on a free directory as: + + mount -t ext3 /dev/ram0 ./test + where ./test is the empty directory. + +c Copy your root fs directory that you have so carefully made over. + + cp -af /tmp/my_final_rootfs_files/* ./test + + (For ex: cp -af uClinux-dist/romfs/* ./test) + +d If you have done everything right till now you should be able to see + the required "root" dir's (that's etc, root, bin, lib, sbin...) + +e Now unmount the file system + + umount ./test + +f Create the root file system image. + + dd if=/dev/ram0 bs=1k count= \ + > ext3fs.img + + +Now you have to tell the kernel that will be mounting this file system as +rootfs. +So do a make menuconfig under kernel and select the Ext3 journaling file system +support under File system --> submenu. + + +2. Mounting EXT2 File system. + ------------------------- + +By default the ext2 file system image will be created if you invoke make from +the top uClinux-dist directory. + + +3. Mounting CRAMFS File System + ---------------------------- + +To create a CRAMFS file system image execute the command + + mkfs.cramfs ./test cramfs.img + + where ./test is the target directory. + + +4. Mounting ROMFS File System + -------------------------- + +To create a ROMFS file system image execute the command + + genromfs -v -V "ROMdisk" -f romfs.img -d ./test + + where ./test is the target directory + + +5. Mounting the JFFS2 Filesystem + ----------------------------- + +To create a compressed JFFS filesystem (JFFS2), please execute the command + + mkfs.jffs2 -d ./test -o jffs2.img + + where ./test is the target directory. + +However, please make sure the following is in your kernel config. + +/* + * RAM/ROM/Flash chip drivers + */ +#define CONFIG_MTD_CFI 1 +#define CONFIG_MTD_ROM 1 +/* + * Mapping drivers for chip access + */ +#define CONFIG_MTD_COMPLEX_MAPPINGS 1 +#define CONFIG_MTD_BF533 1 +#undef CONFIG_MTD_UCLINUX + +Through the u-boot boot loader, use the jffs2.img in the corresponding +partition made in linux-2.6.x/drivers/mtd/maps/bf533_flash.c. + +NOTE - Currently the Flash driver is available only for EZKIT. Watch out for a + STAMP driver soon. + + +6. Mounting the NFS File system + ----------------------------- + + For mounting the NFS please do the following in the kernel config. + + In Networking Support --> Networking options --> TCP/IP networking --> + IP: kernel level autoconfiguration + + Enable BOOTP Support. + + In Kernel hacking --> Compiled-in kernel boot parameter add the following + + root=/dev/nfs rw ip=bootp + + In File system --> Network File system, Enable + + NFS file system support --> NFSv3 client support + Root File system on NFS + + in uClibc menuconfig, do the following + In Networking Support + enable Remote Procedure Call (RPC) support + Full RPC Support + + On the Host side, ensure that /etc/dhcpd.conf looks something like this + + ddns-update-style ad-hoc; + allow bootp; + subnet 10.100.4.0 netmask 255.255.255.0 { + default-lease-time 122209600; + max-lease-time 31557600; + group { + host bf533 { + hardware ethernet 00:CF:52:49:C3:01; + fixed-address 10.100.4.50; + option root-path "/home/nfsmount"; + } + } + + ensure that /etc/exports looks something like this + /home/nfsmount *(rw,no_root_squash,no_all_squash) + + run the following commands as root (may differ depending on your + distribution) : + - service nfs start + - service portmap start + - service dhcpd start + - /usr/sbin/exportfs diff --git a/Documentation/blackfin/cache-lock.txt b/Documentation/blackfin/cache-lock.txt new file mode 100644 index 0000000000..88ba1e6c31 --- /dev/null +++ b/Documentation/blackfin/cache-lock.txt @@ -0,0 +1,48 @@ +/* + * File: Documentation/blackfin/cache-lock.txt + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Rev: $Id: cache-lock.txt 2384 2006-11-01 04:12:43Z magicyang $ + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + */ + +How to lock your code in cache in uClinux/blackfin +-------------------------------------------------- + +There are only a few steps required to lock your code into the cache. +Currently you can lock the code by Way. + +Below are the interface provided for locking the cache. + + +1. cache_grab_lock(int Ways); + +This function grab the lock for locking your code into the cache specified +by Ways. + + +2. cache_lock(int Ways); + +This function should be called after your critical code has been executed. +Once the critical code exits, the code is now loaded into the cache. This +function locks the code into the cache. + + +So, the example sequence will be: + + cache_grab_lock(WAY0_L); /* Grab the lock */ + + critical_code(); /* Execute the code of interest */ + + cache_lock(WAY0_L); /* Lock the cache */ + +Where WAY0_L signifies WAY0 locking. diff --git a/Documentation/blackfin/cachefeatures.txt b/Documentation/blackfin/cachefeatures.txt new file mode 100644 index 0000000000..0fbec23bec --- /dev/null +++ b/Documentation/blackfin/cachefeatures.txt @@ -0,0 +1,65 @@ +/* + * File: Documentation/blackfin/cachefeatures.txt + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Rev: $Id: cachefeatures.txt 2384 2006-11-01 04:12:43Z magicyang $ + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + */ + + - Instruction and Data cache initialization. + icache_init(); + dcache_init(); + + - Instruction and Data cache Invalidation Routines, when flushing the + same is not required. + _icache_invalidate(); + _dcache_invalidate(); + + Also, for invalidating the entire instruction and data cache, the below + routines are provided (another method for invalidation, refer page no 267 and 287 of + ADSP-BF533 Hardware Reference manual) + + invalidate_entire_dcache(); + invalidate_entire_icache(); + + -External Flushing of Instruction and data cache routines. + + flush_instruction_cache(); + flush_data_cache(); + + - Internal Flushing of Instruction and Data Cache. + + icplb_flush(); + dcplb_flush(); + + - Locking the cache. + + cache_grab_lock(); + cache_lock(); + + Please refer linux-2.6.x/Documentation/blackfin/cache-lock.txt for how to + lock the cache. + + Locking the cache is optional feature. + + - Miscellaneous cache functions. + + flush_cache_all(); + flush_cache_mm(); + invalidate_dcache_range(); + flush_dcache_range(); + flush_dcache_page(); + flush_cache_range(); + flush_cache_page(); + invalidate_dcache_range(); + flush_page_to_ram(); + diff --git a/MAINTAINERS b/MAINTAINERS index 0492dd88e1..6d665ac13f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -700,6 +700,44 @@ P: Richard Purdie M: rpurdie@rpsys.net S: Maintained +BLACKFIN ARCHITECTURE +P: Aubrey Li +M: aubrey.li@analog.com +P: Bernd Schmidt +M: bernd.schmidt@analog.com +P: Bryan Wu +M: bryan.wu@analog.com +P: Grace Pan +M: grace.pan@analog.com +P: Michael Hennerich +M: michael.hennerich@analog.com +P: Mike Frysinger +M: michael.frysinger@analog.com +P: Jane Lv +M: jane.lv@analog.com +P: Jerry Zeng +M: jerry.zeng@analog.com +P: Jie Zhang +M: jie.zhang@analog.com +P: Robin Getz +M: robin.getz@analog.com +P: Roy Huang +M: roy.huang@analog.com +P: Sonic Zhang +M: sonic.zhang@analog.com +P: Yi Li +M: yi.li@analog.com +L: uclinux-dist-devel@blackfin.uclinux.org +W: http://blackfin.uclinux.org +S: Supported + +BLACKFIN SERIAL DRIVER +P: Aubrey Li +M: aubrey.li@analog.com +L: uclinux-dist-devel@blackfin.uclinux.org +W: http://blackfin.uclinux.org +S: Supported + BAYCOM/HDLCDRV DRIVERS FOR AX.25 P: Thomas Sailer M: t.sailer@alumni.ethz.ch diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig new file mode 100644 index 0000000000..1a49305093 --- /dev/null +++ b/arch/blackfin/Kconfig @@ -0,0 +1,989 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +mainmenu "uClinux/Blackfin (w/o MMU) Kernel Configuration" + +config MMU + bool + default n + +config FPU + bool + default n + +config RWSEM_GENERIC_SPINLOCK + bool + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + default n + +config BLACKFIN + bool + default y + +config BFIN + bool + default y + +config SEMAPHORE_SLEEPERS + bool + default y + +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + +config GENERIC_HARDIRQS + bool + default y + +config GENERIC_IRQ_PROBE + bool + default y + +config GENERIC_TIME + bool + default n + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config FORCE_MAX_ZONEORDER + int + default "14" + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config IRQCHIP_DEMUX_GPIO + bool + default y + +source "init/Kconfig" +source "kernel/Kconfig.preempt" + +menu "Blackfin Processor Options" + +comment "Processor and Board Settings" + +choice + prompt "CPU" + default BF533 + +config BF531 + bool "BF531" + help + BF531 Processor Support. + +config BF532 + bool "BF532" + help + BF532 Processor Support. + +config BF533 + bool "BF533" + help + BF533 Processor Support. + +config BF534 + bool "BF534" + help + BF534 Processor Support. + +config BF536 + bool "BF536" + help + BF536 Processor Support. + +config BF537 + bool "BF537" + help + BF537 Processor Support. + +config BF561 + bool "BF561" + help + Not Supported Yet - Work in progress - BF561 Processor Support. + +endchoice + +choice + prompt "Silicon Rev" + default BF_REV_0_2 if BF537 + default BF_REV_0_3 if BF533 + +config BF_REV_0_2 + bool "0.2" + depends on (BF537 || BF536 || BF534) + +config BF_REV_0_3 + bool "0.3" + depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) + +config BF_REV_0_4 + bool "0.4" + depends on (BF561 || BF533 || BF532 || BF531) + +config BF_REV_0_5 + bool "0.5" + depends on (BF561 || BF533 || BF532 || BF531) + +endchoice + +config BFIN_DUAL_CORE + bool + depends on (BF561) + default y + +config BFIN_SINGLE_CORE + bool + depends on !BFIN_DUAL_CORE + default y + +choice + prompt "System type" + default BFIN533_STAMP + help + Do NOT change the board here. Please use the top level + configuration to ensure that all the other settings are + correct. + +config BFIN533_EZKIT + bool "BF533-EZKIT" + depends on (BF533 || BF532 || BF531) + help + BF533-EZKIT-LITE board Support. + +config BFIN533_STAMP + bool "BF533-STAMP" + depends on (BF533 || BF532 || BF531) + help + BF533-STAMP board Support. + +config BFIN537_STAMP + bool "BF537-STAMP" + depends on (BF537 || BF536 || BF534) + help + BF537-STAMP board Support. + +config BFIN533_BLUETECHNIX_CM + bool "Bluetechnix CM-BF533" + depends on (BF533) + help + CM-BF533 support for EVAL- and DEV-Board. + +config BFIN537_BLUETECHNIX_CM + bool "Bluetechnix CM-BF537" + depends on (BF537) + help + CM-BF537 support for EVAL- and DEV-Board. + +config BFIN561_BLUETECHNIX_CM + bool "BF561-CM" + depends on (BF561) + help + CM-BF561 support for EVAL- and DEV-Board. + +config BFIN561_EZKIT + bool "BF561-EZKIT" + depends on (BF561) + help + BF561-EZKIT-LITE board Support. + +config PNAV10 + bool "PNAV 1.0 board" + depends on (BF537) + help + PNAV 1.0 board Support. + +config GENERIC_BOARD + bool "Custom" + depends on (BF537 || BF536 \ + || BF534 || BF561 || BF535 || BF533 || BF532 || BF531) + help + GENERIC or Custom board Support. + +endchoice + +config MEM_GENERIC_BOARD + bool + depends on GENERIC_BOARD + default y + +config MEM_MT48LC64M4A2FB_7E + bool + depends on (BFIN533_STAMP) + default y + +config MEM_MT48LC16M16A2TG_75 + bool + depends on (BFIN533_EZKIT || BFIN561_EZKIT \ + || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM) + default y + +config MEM_MT48LC32M8A2_75 + bool + depends on (BFIN537_STAMP || PNAV10) + default y + +config MEM_MT48LC8M32B2B5_7 + bool + depends on (BFIN561_BLUETECHNIX_CM) + default y + +config BFIN_SHARED_FLASH_ENET + bool + depends on (BFIN533_STAMP) + default y + +source "arch/blackfin/mach-bf533/Kconfig" +source "arch/blackfin/mach-bf561/Kconfig" +source "arch/blackfin/mach-bf537/Kconfig" + +menu "Board customizations" + +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" + +config CMDLINE + string "Initial kernel command string" + depends on CMDLINE_BOOL + default "console=ttyBF0,57600" + help + If you don't have a boot loader capable of passing a command line string + to the kernel, you may specify one here. As a minimum, you should specify + the memory size and the root device (e.g., mem=8M, root=/dev/nfs). + +comment "Board Setup" + +config CLKIN_HZ + int "Crystal Frequency in Hz" + default "11059200" if BFIN533_STAMP + default "27000000" if BFIN533_EZKIT + default "25000000" if BFIN537_STAMP + default "30000000" if BFIN561_EZKIT + default "24576000" if PNAV10 + help + The frequency of CLKIN crystal oscillator on the board in Hz. + +config MEM_SIZE + int "SDRAM Memory Size in MBytes" + default 32 if BFIN533_EZKIT + default 64 if BFIN537_STAMP + default 64 if BFIN561_EZKIT + default 128 if BFIN533_STAMP + default 64 if PNAV10 + +config MEM_ADD_WIDTH + int "SDRAM Memory Address Width" + default 9 if BFIN533_EZKIT + default 9 if BFIN561_EZKIT + default 10 if BFIN537_STAMP + default 11 if BFIN533_STAMP + default 10 if PNAV10 + +config ENET_FLASH_PIN + int "PF port/pin used for flash and ethernet sharing" + depends on (BFIN533_STAMP) + default 0 + help + PF port/pin used for flash and ethernet sharing to allow other PF + pins to be used on other platforms without having to touch common + code. + For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc. + +config BOOT_LOAD + hex "Kernel load address for booting" + default "0x1000" + help + This option allows you to set the load address of the kernel. + This can be useful if you are on a board which has a small amount + of memory or you wish to reserve some memory at the beginning of + the address space. + + Note that you generally want to keep this value at or above 4k + (0x1000) as this will allow the kernel to capture NULL pointer + references. + +comment "LED Status Indicators" + depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) + +config BFIN_ALIVE_LED + bool "Enable Board Alive" + depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) + default n + help + Blink the LEDs you select when the kernel is running. Helps detect + a hung kernel. + +config BFIN_ALIVE_LED_NUM + int "LED" + depends on BFIN_ALIVE_LED + range 1 3 if BFIN533_STAMP + default "3" if BFIN533_STAMP + help + Select the LED (marked on the board) for you to blink. + +config BFIN_IDLE_LED + bool "Enable System Load/Idle LED" + depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) + default n + help + Blinks the LED you select when to determine kernel load. + +config BFIN_IDLE_LED_NUM + int "LED" + depends on BFIN_IDLE_LED + range 1 3 if BFIN533_STAMP + default "2" if BFIN533_STAMP + help + Select the LED (marked on the board) for you to blink. + +# +# Sorry - but you need to put the hex address here - +# + +# Flag Data register +config BFIN_ALIVE_LED_PORT + hex + default 0xFFC00700 if (BFIN533_STAMP) + +# Peripheral Flag Direction Register +config BFIN_ALIVE_LED_DPORT + hex + default 0xFFC00730 if (BFIN533_STAMP) + +config BFIN_ALIVE_LED_PIN + hex + default 0x04 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 1) + default 0x08 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 2) + default 0x10 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 3) + +config BFIN_IDLE_LED_PORT + hex + default 0xFFC00700 if (BFIN533_STAMP) + +# Peripheral Flag Direction Register +config BFIN_IDLE_LED_DPORT + hex + default 0xFFC00730 if (BFIN533_STAMP) + +config BFIN_IDLE_LED_PIN + hex + default 0x04 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 1) + default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2) + default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3) + +comment "Console UART Setup" + +choice + prompt "Baud Rate" + default BAUD_57600 +config BAUD_9600 + bool "9600" +config BAUD_19200 + bool "19200" +config BAUD_38400 + bool "38400" +config BAUD_57600 + bool "57600" +config BAUD_115200 + bool "115200" +endchoice + +choice + prompt "Parity" + default BAUD_NO_PARITY +config BAUD_NO_PARITY + bool "No Parity" +config BAUD_PARITY + bool "Parity" +endchoice + +choice + prompt "Stop Bits" + default BAUD_1_STOPBIT +config BAUD_1_STOPBIT + bool "1" +config BAUD_2_STOPBIT + bool "2" +endchoice + +endmenu + + +menu "Blackfin Kernel Optimizations" + +comment "Timer Tick" + +source kernel/Kconfig.hz + +comment "Memory Optimizations" + +config I_ENTRY_L1 + bool "Locate interrupt entry code in L1 Memory" + default y + help + If enabled interrupt entry code (STORE/RESTORE CONTEXT) is linked + into L1 instruction memory.(less latency) + +config EXCPT_IRQ_SYSC_L1 + bool "Locate entire ASM lowlevel excepetion / interrupt - Syscall and CPLB handler code in L1 Memory" + default y + help + If enabled entire ASM lowlevel exception and interrupt entry code (STORE/RESTORE CONTEXT) is linked + into L1 instruction memory.(less latency) + +config DO_IRQ_L1 + bool "Locate frequently called do_irq dispatcher function in L1 Memory" + default y + help + If enabled frequently called do_irq dispatcher function is linked + into L1 instruction memory.(less latency) + +config CORE_TIMER_IRQ_L1 + bool "Locate frequently called timer_interrupt() function in L1 Memory" + default y + help + If enabled frequently called timer_interrupt() function is linked + into L1 instruction memory.(less latency) + +config IDLE_L1 + bool "Locate frequently idle function in L1 Memory" + default y + help + If enabled frequently called idle function is linked + into L1 instruction memory.(less latency) + +config SCHEDULE_L1 + bool "Locate kernel schedule function in L1 Memory" + default y + help + If enabled frequently called kernel schedule is linked + into L1 instruction memory.(less latency) + +config ARITHMETIC_OPS_L1 + bool "Locate kernel owned arithmetic functions in L1 Memory" + default y + help + If enabled arithmetic functions are linked + into L1 instruction memory.(less latency) + +config ACCESS_OK_L1 + bool "Locate access_ok function in L1 Memory" + default y + help + If enabled access_ok function is linked + into L1 instruction memory.(less latency) + +config MEMSET_L1 + bool "Locate memset function in L1 Memory" + default y + help + If enabled memset function is linked + into L1 instruction memory.(less latency) + +config MEMCPY_L1 + bool "Locate memcpy function in L1 Memory" + default y + help + If enabled memcpy function is linked + into L1 instruction memory.(less latency) + +config SYS_BFIN_SPINLOCK_L1 + bool "Locate sys_bfin_spinlock function in L1 Memory" + default y + help + If enabled sys_bfin_spinlock function is linked + into L1 instruction memory.(less latency) + +config IP_CHECKSUM_L1 + bool "Locate IP Checksum function in L1 Memory" + default n + help + If enabled IP Checksum function is linked + into L1 instruction memory.(less latency) + +config CACHELINE_ALIGNED_L1 + bool "Locate cacheline_aligned data to L1 Data Memory" + default y + depends on !BF531 + help + If enabled cacheline_anligned data is linked + into L1 data memory.(less latency) + +config SYSCALL_TAB_L1 + bool "Locate Syscall Table L1 Data Memory" + default n + depends on !BF531 + help + If enabled the Syscall LUT is linked + into L1 data memory.(less latency) + +config CPLB_SWITCH_TAB_L1 + bool "Locate CPLB Switch Tables L1 Data Memory" + default n + depends on !BF531 + help + If enabled the CPLB Switch Tables are linked + into L1 data memory.(less latency) + +endmenu + + +choice + prompt "Kernel executes from" + help + Choose the memory type that the kernel will be running in. + +config RAMKERNEL + bool "RAM" + help + The kernel will be resident in RAM when running. + +config ROMKERNEL + bool "ROM" + help + The kernel will be resident in FLASH/ROM when running. + +endchoice + +source "mm/Kconfig" + +config LARGE_ALLOCS + bool "Allow allocating large blocks (> 1MB) of memory" + help + Allow the slab memory allocator to keep chains for very large + memory sizes - upto 32MB. You may need this if your system has + a lot of RAM, and you need to able to allocate very large + contiguous chunks. If unsure, say N. + +config BFIN_DMA_5XX + bool "Enable DMA Support" + depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561) + default y + help + DMA driver for BF5xx. + +choice + prompt "Uncached SDRAM region" + default DMA_UNCACHED_1M + depends BFIN_DMA_5XX +config DMA_UNCACHED_2M + bool "Enable 2M DMA region" +config DMA_UNCACHED_1M + bool "Enable 1M DMA region" +config DMA_UNCACHED_NONE + bool "Disable DMA region" +endchoice + + +comment "Cache Support" +config BLKFIN_CACHE + bool "Enable ICACHE" +config BLKFIN_DCACHE + bool "Enable DCACHE" +config BLKFIN_DCACHE_BANKA + bool "Enable only 16k BankA DCACHE - BankB is SRAM" + depends on BLKFIN_DCACHE && !BF531 + default n +config BLKFIN_CACHE_LOCK + bool "Enable Cache Locking" + +choice + prompt "Policy" + depends on BLKFIN_DCACHE + default BLKFIN_WB +config BLKFIN_WB + bool "Write back" + help + Write Back Policy: + Cached data will be written back to SDRAM only when needed. + This can give a nice increase in performance, but beware of + broken drivers that do not properly invalidate/flush their + cache. + + Write Through Policy: + Cached data will always be written back to SDRAM when the + cache is updated. This is a completely safe setting, but + performance is worse than Write Back. + + If you are unsure of the options and you want to be safe, + then go with Write Through. + +config BLKFIN_WT + bool "Write through" + help + Write Back Policy: + Cached data will be written back to SDRAM only when needed. + This can give a nice increase in performance, but beware of + broken drivers that do not properly invalidate/flush their + cache. + + Write Through Policy: + Cached data will always be written back to SDRAM when the + cache is updated. This is a completely safe setting, but + performance is worse than Write Back. + + If you are unsure of the options and you want to be safe, + then go with Write Through. + +endchoice + +config L1_MAX_PIECE + int "Set the max L1 SRAM pieces" + default 16 + help + Set the max memory pieces for the L1 SRAM allocation algorithm. + Min value is 16. Max value is 1024. + +menu "Clock Settings" + + +config BFIN_KERNEL_CLOCK + bool "Re-program Clocks while Kernel boots?" + default n + help + This option decides if kernel clocks are re-programed from the + bootloader settings. If the clocks are not set, the SDRAM settings + are also not changed, and the Bootloader does 100% of the hardware + configuration. + +config VCO_MULT + int "VCO Multiplier" + depends on BFIN_KERNEL_CLOCK + default "22" if BFIN533_EZKIT + default "45" if BFIN533_STAMP + default "20" if BFIN537_STAMP + default "22" if BFIN533_BLUETECHNIX_CM + default "20" if BFIN537_BLUETECHNIX_CM + default "20" if BFIN561_BLUETECHNIX_CM + default "20" if BFIN561_EZKIT + +config CCLK_DIV + int "Core Clock Divider" + depends on BFIN_KERNEL_CLOCK + default 1 if BFIN533_EZKIT + default 1 if BFIN533_STAMP + default 1 if BFIN537_STAMP + default 1 if BFIN533_BLUETECHNIX_CM + default 1 if BFIN537_BLUETECHNIX_CM + default 1 if BFIN561_BLUETECHNIX_CM + default 1 if BFIN561_EZKIT + +config SCLK_DIV + int "System Clock Divider" + depends on BFIN_KERNEL_CLOCK + default 5 if BFIN533_EZKIT + default 5 if BFIN533_STAMP + default 4 if BFIN537_STAMP + default 5 if BFIN533_BLUETECHNIX_CM + default 4 if BFIN537_BLUETECHNIX_CM + default 4 if BFIN561_BLUETECHNIX_CM + default 5 if BFIN561_EZKIT + +config CLKIN_HALF + bool "Half ClockIn" + depends on BFIN_KERNEL_CLOCK + default n + +config PLL_BYPASS + bool "Bypass PLL" + depends on BFIN_KERNEL_CLOCK + default n + +endmenu + +comment "Asynchonous Memory Configuration" + +menu "EBIU_AMBCTL Global Control" +config C_AMCKEN + bool "Enable CLKOUT" + default y + +config C_CDPRIO + bool "DMA has priority over core for ext. accesses" + default n + +config C_B0PEN + depends on BF561 + bool "Bank 0 16 bit packing enable" + default y + +config C_B1PEN + depends on BF561 + bool "Bank 1 16 bit packing enable" + default y + +config C_B2PEN + depends on BF561 + bool "Bank 2 16 bit packing enable" + default y + +config C_B3PEN + depends on BF561 + bool "Bank 3 16 bit packing enable" + default n + +choice + prompt"Enable Asynchonous Memory Banks" + default C_AMBEN_ALL + +config C_AMBEN + bool "Disable All Banks" + +config C_AMBEN_B0 + bool "Enable Bank 0" + +config C_AMBEN_B0_B1 + bool "Enable Bank 0 & 1" + +config C_AMBEN_B0_B1_B2 + bool "Enable Bank 0 & 1 & 2" + +config C_AMBEN_ALL + bool "Enable All Banks" +endchoice +endmenu + +menu "EBIU_AMBCTL Control" +config BANK_0 + hex "Bank 0" + default 0x7BB0 + +config BANK_1 + hex "Bank 1" + default 0x7BB0 + +config BANK_2 + hex "Bank 2" + default 0x7BB0 + +config BANK_3 + hex "Bank 3" + default 0x99B3 +endmenu + +endmenu + +############################################################################# +menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" + +config PCI + bool "PCI support" + help + Support for PCI bus. + +source "drivers/pci/Kconfig" + +config HOTPLUG + bool "Support for hot-pluggable device" + help + Say Y here if you want to plug devices into your computer while + the system is running, and be able to use them quickly. In many + cases, the devices can likewise be unplugged at any time too. + + One well known example of this is PCMCIA- or PC-cards, credit-card + size devices such as network cards, modems or hard drives which are + plugged into slots found on all modern laptop computers. Another + example, used on modern desktops as well as laptops, is USB. + + Enable HOTPLUG and KMOD, and build a modular kernel. Get agent + software (at ) and install it. + Then your kernel will automatically call out to a user mode "policy + agent" (/sbin/hotplug) to load modules and set up software needed + to use devices as you hotplug them. + +source "drivers/pcmcia/Kconfig" + +source "drivers/pci/hotplug/Kconfig" + +endmenu + +menu "Executable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +menu "Power management options" +source "kernel/power/Kconfig" + +choice + prompt "Select PM Wakeup Event Source" + default PM_WAKEUP_GPIO_BY_SIC_IWR + depends on PM + help + If you have a GPIO already configured as input with the corresponding PORTx_MASK + bit set - "Specify Wakeup Event by SIC_IWR value" + +config PM_WAKEUP_GPIO_BY_SIC_IWR + bool "Specify Wakeup Event by SIC_IWR value" +config PM_WAKEUP_BY_GPIO + bool "Cause Wakeup Event by GPIO" +config PM_WAKEUP_GPIO_API + bool "Configure Wakeup Event by PM GPIO API" + +endchoice + +config PM_WAKEUP_SIC_IWR + hex "Wakeup Events (SIC_IWR)" + depends on PM_WAKEUP_GPIO_BY_SIC_IWR + default 0x80000000 if (BF537 || BF536 || BF534) + default 0x100000 if (BF533 || BF532 || BF531) + +config PM_WAKEUP_GPIO_NUMBER + int "Wakeup GPIO number" + range 0 47 + depends on PM_WAKEUP_BY_GPIO + default 2 if BFIN537_STAMP + +choice + prompt "GPIO Polarity" + depends on PM_WAKEUP_BY_GPIO + default PM_WAKEUP_GPIO_POLAR_H +config PM_WAKEUP_GPIO_POLAR_H + bool "Active High" +config PM_WAKEUP_GPIO_POLAR_L + bool "Active Low" +config PM_WAKEUP_GPIO_POLAR_EDGE_F + bool "Falling EDGE" +config PM_WAKEUP_GPIO_POLAR_EDGE_R + bool "Rising EDGE" +config PM_WAKEUP_GPIO_POLAR_EDGE_B + bool "Both EDGE" +endchoice + +endmenu + +if (BF537 || BF533) + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +config CPU_FREQ + bool + default n + help + If you want to enable this option, you should select the + DPMC driver from Character Devices. +endmenu + +endif + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/blackfin/oprofile/Kconfig" + +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config DEBUG_HWERR + bool "Hardware error interrupt debugging" + depends on DEBUG_KERNEL + help + When enabled, the hardware error interrupt is never disabled, and + will happen immediately when an error condition occurs. This comes + at a slight cost in code size, but is necessary if you are getting + hardware error interrupts and need to know where they are coming + from. + +config DEBUG_ICACHE_CHECK + bool "Check Instruction cache coherancy" + depends on DEBUG_KERNEL + depends on DEBUG_HWERR + help + Say Y here if you are getting wierd unexplained errors. This will + ensure that icache is what SDRAM says it should be, by doing a + byte wise comparision between SDRAM and instruction cache. This + also relocates the irq_panic() function to L1 memory, (which is + un-cached). + +config DEBUG_KERNEL_START + bool "Debug Kernel Startup" + depends on DEBUG_KERNEL + help + Say Y here to put in an mini-execption handler before the kernel + replaces the bootloader exception handler. This will stop kernels + from dieing at startup with no visible error messages. + +config DEBUG_SERIAL_EARLY_INIT + bool "Initialize serial driver early" + default n + depends on SERIAL_BFIN + help + Say Y here if you want to get kernel output early when kernel + crashes before the normal console initialization. If this option + is enable, console output will always go to the ttyBF0, no matter + what kernel boot paramters you set. + +config DEBUG_HUNT_FOR_ZERO + bool "Catch NULL pointer reads/writes" + default y + help + Say Y here to catch reads/writes to anywhere in the memory range + from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in + catching common programming errors such as NULL pointer dereferences. + + Misbehaving applications will be killed (generate a SEGV) while the + kernel will trigger a panic. + + Enabling this option will take up an extra entry in CPLB table. + Otherwise, there is no extra overhead. + +config DEBUG_BFIN_NO_KERN_HWTRACE + bool "Trace user apps (turn off hwtrace in kernel)" + default n + help + Some pieces of the kernel contain a lot of flow changes which can + quickly fill up the hardware trace buffer. When debugging crashes, + the hardware trace may indicate that the problem lies in kernel + space when in reality an application is buggy. + + Say Y here to disable hardware tracing in some known "jumpy" pieces + of code so that the trace buffer will extend further back. + +config DUAL_CORE_TEST_MODULE + tristate "Dual Core Test Module" + depends on (BF561) + default n + help + Say Y here to build-in dual core test module for dual core test. + +config CPLB_INFO + bool "Display the CPLB information" + help + Display the CPLB information. + +config ACCESS_CHECK + bool "Check the user pointer address" + default y + help + Usually the pointer transfer from user space is checked to see if its + address is in the kernel space. + + Say N here to disable that check to improve the performance. + +endmenu + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile new file mode 100644 index 0000000000..52d4dbdb2b --- /dev/null +++ b/arch/blackfin/Makefile @@ -0,0 +1,80 @@ +# +# arch/blackfin/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + + +CROSS_COMPILE ?= bfin-uclinux- +LDFLAGS_vmlinux := -X +OBJCOPYFLAGS := -O binary -R .note -R .comment -S +GZFLAGS := -9 + +CFLAGS_MODULE += -mlong-calls +KALLSYMS += --symbol-prefix=_ + + +# setup the machine name and the machine dependent settings +machine-$(CONFIG_BF531) := bf533 +machine-$(CONFIG_BF532) := bf533 +machine-$(CONFIG_BF533) := bf533 +machine-$(CONFIG_BF534) := bf537 +machine-$(CONFIG_BF536) := bf537 +machine-$(CONFIG_BF537) := bf537 +machine-$(CONFIG_BF561) := bf561 +MACHINE := $(machine-y) +export MACHINE + + +head-y := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o + +core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/ + +# If we have a machine-specific directory, then include it in the build. +ifneq ($(machine-y),) +core-y += arch/$(ARCH)/mach-$(MACHINE)/ +core-y += arch/$(ARCH)/mach-$(MACHINE)/boards/ +endif + +libs-y += arch/$(ARCH)/lib/ + +drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ + + + +# Update machine arch symlinks if something which affects +# them changed. We use .mach to indicate when they were updated +# last, otherwise make uses the target directory mtime. + +include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf + @echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach' +ifneq ($(KBUILD_SRC),) + $(Q)mkdir -p include/asm-$(ARCH) + $(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach +else + $(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach +endif + @touch $@ + +CLEAN_FILES += \ + include/asm-$(ARCH)/asm-offsets.h \ + arch/$(ARCH)/kernel/asm-offsets.s \ + include/asm-$(ARCH)/mach \ + include/asm-$(ARCH)/.mach + +archprepare: include/asm-blackfin/.mach +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + + +all: vmImage +boot := arch/$(ARCH)/boot +BOOT_TARGETS = vmImage +.PHONY: $(BOOT_TARGETS) +$(BOOT_TARGETS): vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ +define archhelp + echo '* vmImage - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)' +endef diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile new file mode 100644 index 0000000000..49e8098d4c --- /dev/null +++ b/arch/blackfin/boot/Makefile @@ -0,0 +1,27 @@ +# +# arch/blackfin/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +MKIMAGE := $(srctree)/scripts/mkuboot.sh + +targets := vmImage +extra-y += vmlinux.bin vmlinux.gz + +quiet_cmd_uimage = UIMAGE $@ + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \ + -C gzip -a $(CONFIG_BOOT_LOAD) -e $(CONFIG_BOOT_LOAD) -n 'Linux-$(KERNELRELEASE)' \ + -d $< $@ + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +$(obj)/vmImage: $(obj)/vmlinux.gz + $(call if_changed,uimage) + @echo 'Kernel: $@ is ready' diff --git a/arch/blackfin/defconfig b/arch/blackfin/defconfig new file mode 100644 index 0000000000..d5904ca994 --- /dev/null +++ b/arch/blackfin/defconfig @@ -0,0 +1,1314 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BFIN=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_UCLINUX=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_IRQCHIP_DEMUX_GPIO=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_LIMIT_PAGECACHE is not set +CONFIG_BUDDY=y +# CONFIG_NP2 is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF535 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF561 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +CONFIG_BLACKFIN=y +CONFIG_BFIN_SINGLE_CORE=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +CONFIG_BFIN537_STAMP=y +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_PNAV10 is not set +# CONFIG_GENERIC_BOARD is not set +CONFIG_MEM_MT48LC32M8A2_75=y +CONFIG_IRQ_PLL_WAKEUP=7 + +# +# BF537 Specific Configuration +# + +# +# PORT F/G Selection +# +CONFIG_BF537_PORT_F=y +# CONFIG_BF537_PORT_G is not set +# CONFIG_BF537_PORT_H is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PROG_INTA=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 + +# +# Board customizations +# + +# +# Board Setup +# +CONFIG_CLKIN_HZ=25000000 +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 + +# +# Console UART Setup +# +# CONFIG_BAUD_9600 is not set +# CONFIG_BAUD_19200 is not set +# CONFIG_BAUD_38400 is not set +CONFIG_BAUD_57600=y +# CONFIG_BAUD_115200 is not set +CONFIG_BAUD_NO_PARITY=y +# CONFIG_BAUD_PARITY is not set +CONFIG_BAUD_1_STOPBIT=y +# CONFIG_BAUD_2_STOPBIT is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Timer Tick +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BLKFIN_CACHE=y +CONFIG_BLKFIN_DCACHE=y +# CONFIG_BLKFIN_CACHE_LOCK is not set +# CONFIG_BLKFIN_WB is not set +CONFIG_BLKFIN_WT=y +CONFIG_L1_MAX_PIECE=16 + +# +# Clock Settings +# +# CONFIG_BFIN_KERNEL_CLOCK is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMBCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set +# CONFIG_PM_WAKEUP_GPIO_API is not set +CONFIG_PM_WAKEUP_SIC_IWR=0x80000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_MW320D=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_BF5xx=m +CONFIG_BFIN_FLASH_SIZE=0x400000 +CONFIG_EBIU_FLASH_BASE=0x20000000 + +# +# FLASH_EBIU_AMBCTL Control +# +CONFIG_BFIN_FLASH_BANK_0=0x7BB0 +CONFIG_BFIN_FLASH_BANK_1=0x7BB0 +CONFIG_BFIN_FLASH_BANK_2=0x7BB0 +CONFIG_BFIN_FLASH_BANK_3=0x7BB0 +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_BFIN=m +CONFIG_BFIN_NAND_BASE=0x20212000 +CONFIG_BFIN_NAND_CLE=2 +CONFIG_BFIN_NAND_ALE=1 +CONFIG_BFIN_NAND_READY=3 +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_BFIN_MAC=y +CONFIG_BFIN_MAC_USE_L1=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_BF53X_PFBUTTONS is not set +CONFIG_TWI_KEYPAD=m +CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +CONFIG_TWI_LCD=m +CONFIG_TWI_LCD_SLAVE_ADDR=34 +# CONFIG_AD5304 is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART1 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +CONFIG_CAN4LINUX=y + +# +# linux embedded drivers +# +# CONFIG_CAN_MCF5282 is not set +# CONFIG_CAN_UNCTWINCAN is not set +CONFIG_CAN_BLACKFIN=m + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +CONFIG_BLACKFIN_DPMC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=m +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_BFIN_GPIO is not set +CONFIG_I2C_BFIN_TWI=m +CONFIG_TWICLK_KHZ=50 +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_AD5252=m +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_BFIN=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=m +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_BFIN_7171=m +CONFIG_FB_BFIN_7393=m +CONFIG_NTSC=y +# CONFIG_PAL is not set +# CONFIG_NTSC_640x480 is not set +# CONFIG_PAL_640x480 is not set +# CONFIG_NTSC_YCBCR is not set +# CONFIG_PAL_YCBCR is not set +CONFIG_ADV7393_1XMEM=y +# CONFIG_ADV7393_2XMEM is not set +CONFIG_FB_BF537_LQ035=m +CONFIG_LQ035_SLAVE_ADDR=0x58 +# CONFIG_FB_BFIN_LANDSCAPE is not set +# CONFIG_FB_BFIN_BGR is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_SPI_MMC is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_BFIN=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_BOOTPARAM is not set +# CONFIG_NO_KERNEL_MSG is not set +CONFIG_CPLB_INFO=y +# CONFIG_NO_ACCESS_CHECK is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile new file mode 100644 index 0000000000..f3b7d2f9d4 --- /dev/null +++ b/arch/blackfin/kernel/Makefile @@ -0,0 +1,14 @@ +# +# arch/blackfin/kernel/Makefile +# + +extra-y := init_task.o vmlinux.lds + +obj-y := \ + entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ + sys_bfin.o time.o traps.o irqchip.o dma-mapping.o bfin_gpio.o \ + flat.o + +obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o +obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c new file mode 100644 index 0000000000..41d9a9f897 --- /dev/null +++ b/arch/blackfin/kernel/asm-offsets.c @@ -0,0 +1,136 @@ +/* + * File: arch/blackfin/kernel/asm-offsets.c + * Based on: + * Author: + * + * Created: + * Description: generate definitions needed by assembly language modules. + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +int main(void) +{ + /* offsets into the task struct */ + DEFINE(TASK_STATE, offsetof(struct task_struct, state)); + DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); + DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); + DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked)); + DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, thread_info)); + DEFINE(TASK_MM, offsetof(struct task_struct, mm)); + DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); + DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, pending)); + + /* offsets into the irq_cpustat_t struct */ + DEFINE(CPUSTAT_SOFTIRQ_PENDING, + offsetof(irq_cpustat_t, __softirq_pending)); + + /* offsets into the thread struct */ + DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); + DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); + DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat)); + DEFINE(PT_SR, offsetof(struct thread_struct, seqstat)); + DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); + DEFINE(THREAD_PC, offsetof(struct thread_struct, pc)); + DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE); + + /* offsets into the pt_regs */ + DEFINE(PT_ORIG_P0, offsetof(struct pt_regs, orig_p0)); + DEFINE(PT_ORIG_PC, offsetof(struct pt_regs, orig_pc)); + DEFINE(PT_R0, offsetof(struct pt_regs, r0)); + DEFINE(PT_R1, offsetof(struct pt_regs, r1)); + DEFINE(PT_R2, offsetof(struct pt_regs, r2)); + DEFINE(PT_R3, offsetof(struct pt_regs, r3)); + DEFINE(PT_R4, offsetof(struct pt_regs, r4)); + DEFINE(PT_R5, offsetof(struct pt_regs, r5)); + DEFINE(PT_R6, offsetof(struct pt_regs, r6)); + DEFINE(PT_R7, offsetof(struct pt_regs, r7)); + + DEFINE(PT_P0, offsetof(struct pt_regs, p0)); + DEFINE(PT_P1, offsetof(struct pt_regs, p1)); + DEFINE(PT_P2, offsetof(struct pt_regs, p2)); + DEFINE(PT_P3, offsetof(struct pt_regs, p3)); + DEFINE(PT_P4, offsetof(struct pt_regs, p4)); + DEFINE(PT_P5, offsetof(struct pt_regs, p5)); + + DEFINE(PT_FP, offsetof(struct pt_regs, fp)); + DEFINE(PT_USP, offsetof(struct pt_regs, usp)); + DEFINE(PT_I0, offsetof(struct pt_regs, i0)); + DEFINE(PT_I1, offsetof(struct pt_regs, i1)); + DEFINE(PT_I2, offsetof(struct pt_regs, i2)); + DEFINE(PT_I3, offsetof(struct pt_regs, i3)); + DEFINE(PT_M0, offsetof(struct pt_regs, m0)); + DEFINE(PT_M1, offsetof(struct pt_regs, m1)); + DEFINE(PT_M2, offsetof(struct pt_regs, m2)); + DEFINE(PT_M3, offsetof(struct pt_regs, m3)); + DEFINE(PT_L0, offsetof(struct pt_regs, l0)); + DEFINE(PT_L1, offsetof(struct pt_regs, l1)); + DEFINE(PT_L2, offsetof(struct pt_regs, l2)); + DEFINE(PT_L3, offsetof(struct pt_regs, l3)); + DEFINE(PT_B0, offsetof(struct pt_regs, b0)); + DEFINE(PT_B1, offsetof(struct pt_regs, b1)); + DEFINE(PT_B2, offsetof(struct pt_regs, b2)); + DEFINE(PT_B3, offsetof(struct pt_regs, b3)); + DEFINE(PT_A0X, offsetof(struct pt_regs, a0x)); + DEFINE(PT_A0W, offsetof(struct pt_regs, a0w)); + DEFINE(PT_A1X, offsetof(struct pt_regs, a1x)); + DEFINE(PT_A1W, offsetof(struct pt_regs, a1w)); + DEFINE(PT_LC0, offsetof(struct pt_regs, lc0)); + DEFINE(PT_LC1, offsetof(struct pt_regs, lc1)); + DEFINE(PT_LT0, offsetof(struct pt_regs, lt0)); + DEFINE(PT_LT1, offsetof(struct pt_regs, lt1)); + DEFINE(PT_LB0, offsetof(struct pt_regs, lb0)); + DEFINE(PT_LB1, offsetof(struct pt_regs, lb1)); + DEFINE(PT_ASTAT, offsetof(struct pt_regs, astat)); + DEFINE(PT_RESERVED, offsetof(struct pt_regs, reserved)); + DEFINE(PT_RETS, offsetof(struct pt_regs, rets)); + DEFINE(PT_PC, offsetof(struct pt_regs, pc)); + DEFINE(PT_RETX, offsetof(struct pt_regs, retx)); + DEFINE(PT_RETN, offsetof(struct pt_regs, retn)); + DEFINE(PT_RETE, offsetof(struct pt_regs, rete)); + DEFINE(PT_SEQSTAT, offsetof(struct pt_regs, seqstat)); + DEFINE(PT_SYSCFG, offsetof(struct pt_regs, syscfg)); + DEFINE(PT_IPEND, offsetof(struct pt_regs, ipend)); + DEFINE(SIZEOF_PTREGS, sizeof(struct pt_regs)); + DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs)); /* Needed by gdb */ + DEFINE(PT_TEXT_END_ADDR, 4 + sizeof(struct pt_regs));/* Needed by gdb */ + DEFINE(PT_DATA_ADDR, 8 + sizeof(struct pt_regs)); /* Needed by gdb */ + DEFINE(PT_FDPIC_EXEC, 12 + sizeof(struct pt_regs)); /* Needed by gdb */ + DEFINE(PT_FDPIC_INTERP, 16 + sizeof(struct pt_regs));/* Needed by gdb */ + + /* signal defines */ + DEFINE(SIGSEGV, SIGSEGV); + DEFINE(SIGTRAP, SIGTRAP); + + return 0; +} diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c new file mode 100644 index 0000000000..8ea079ebec --- /dev/null +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -0,0 +1,742 @@ +/* + * File: arch/blackfin/kernel/bfin_dma_5xx.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +/* Remove unused code not exported by symbol or internally called */ +#define REMOVE_DEAD_CODE + +/************************************************************************** + * Global Variables +***************************************************************************/ + +static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL]; +#if defined (CONFIG_BF561) +static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA1_0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_1_NEXT_DESC_PTR, + (struct dma_register *) DMA1_2_NEXT_DESC_PTR, + (struct dma_register *) DMA1_3_NEXT_DESC_PTR, + (struct dma_register *) DMA1_4_NEXT_DESC_PTR, + (struct dma_register *) DMA1_5_NEXT_DESC_PTR, + (struct dma_register *) DMA1_6_NEXT_DESC_PTR, + (struct dma_register *) DMA1_7_NEXT_DESC_PTR, + (struct dma_register *) DMA1_8_NEXT_DESC_PTR, + (struct dma_register *) DMA1_9_NEXT_DESC_PTR, + (struct dma_register *) DMA1_10_NEXT_DESC_PTR, + (struct dma_register *) DMA1_11_NEXT_DESC_PTR, + (struct dma_register *) DMA2_0_NEXT_DESC_PTR, + (struct dma_register *) DMA2_1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_2_NEXT_DESC_PTR, + (struct dma_register *) DMA2_3_NEXT_DESC_PTR, + (struct dma_register *) DMA2_4_NEXT_DESC_PTR, + (struct dma_register *) DMA2_5_NEXT_DESC_PTR, + (struct dma_register *) DMA2_6_NEXT_DESC_PTR, + (struct dma_register *) DMA2_7_NEXT_DESC_PTR, + (struct dma_register *) DMA2_8_NEXT_DESC_PTR, + (struct dma_register *) DMA2_9_NEXT_DESC_PTR, + (struct dma_register *) DMA2_10_NEXT_DESC_PTR, + (struct dma_register *) DMA2_11_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_S1_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR, +}; +#else +static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, +#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536)) + (struct dma_register *) DMA8_NEXT_DESC_PTR, + (struct dma_register *) DMA9_NEXT_DESC_PTR, + (struct dma_register *) DMA10_NEXT_DESC_PTR, + (struct dma_register *) DMA11_NEXT_DESC_PTR, +#endif + (struct dma_register *) MDMA_D0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S0_NEXT_DESC_PTR, + (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, + (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, +}; +#endif + +/*------------------------------------------------------------------------------ + * Set the Buffer Clear bit in the Configuration register of specific DMA + * channel. This will stop the descriptor based DMA operation. + *-----------------------------------------------------------------------------*/ +static void clear_dma_buffer(unsigned int channel) +{ + dma_ch[channel].regs->cfg |= RESTART; + SSYNC(); + dma_ch[channel].regs->cfg &= ~RESTART; + SSYNC(); +} + +int __init blackfin_dma_init(void) +{ + int i; + + printk(KERN_INFO "Blackfin DMA Controller\n"); + + for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { + dma_ch[i].chan_status = DMA_CHANNEL_FREE; + dma_ch[i].regs = base_addr[i]; + mutex_init(&(dma_ch[i].dmalock)); + } + + return 0; +} + +arch_initcall(blackfin_dma_init); + +/* + * Form the channel find the irq number for that channel. + */ +#if !defined(CONFIG_BF561) + +static int bf533_channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI: + ret_irq = IRQ_PPI; + break; + +#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536)) + case CH_EMAC_RX: + ret_irq = IRQ_MAC_RX; + break; + + case CH_EMAC_TX: + ret_irq = IRQ_MAC_TX; + break; + + case CH_UART1_RX: + ret_irq = IRQ_UART1_RX; + break; + + case CH_UART1_TX: + ret_irq = IRQ_UART1_TX; + break; +#endif + + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + + case CH_SPI: + ret_irq = IRQ_SPI; + break; + + case CH_UART_RX: + ret_irq = IRQ_UART_RX; + break; + + case CH_UART_TX: + ret_irq = IRQ_UART_TX; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM_DMA0; + break; + + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM_DMA1; + break; + } + return ret_irq; +} + +# define channel2irq(channel) bf533_channel2irq(channel) + +#else + +static int bf561_channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_PPI0: + ret_irq = IRQ_PPI0; + break; + case CH_PPI1: + ret_irq = IRQ_PPI1; + break; + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + case CH_SPI: + ret_irq = IRQ_SPI; + break; + case CH_UART_RX: + ret_irq = IRQ_UART_RX; + break; + case CH_UART_TX: + ret_irq = IRQ_UART_TX; + break; + + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MEM_DMA0; + break; + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MEM_DMA1; + break; + case CH_MEM_STREAM2_SRC: + case CH_MEM_STREAM2_DEST: + ret_irq = IRQ_MEM_DMA2; + break; + case CH_MEM_STREAM3_SRC: + case CH_MEM_STREAM3_DEST: + ret_irq = IRQ_MEM_DMA3; + break; + + case CH_IMEM_STREAM0_SRC: + case CH_IMEM_STREAM0_DEST: + ret_irq = IRQ_IMEM_DMA0; + break; + case CH_IMEM_STREAM1_SRC: + case CH_IMEM_STREAM1_DEST: + ret_irq = IRQ_IMEM_DMA1; + break; + } + return ret_irq; +} + +# define channel2irq(channel) bf561_channel2irq(channel) + +#endif + +/*------------------------------------------------------------------------------ + * Request the specific DMA channel from the system. + *-----------------------------------------------------------------------------*/ +int request_dma(unsigned int channel, char *device_id) +{ + + pr_debug("request_dma() : BEGIN \n"); + mutex_lock(&(dma_ch[channel].dmalock)); + + if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED) + || (dma_ch[channel].chan_status == DMA_CHANNEL_ENABLED)) { + mutex_unlock(&(dma_ch[channel].dmalock)); + pr_debug("DMA CHANNEL IN USE \n"); + return -EBUSY; + } else { + dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; + pr_debug("DMA CHANNEL IS ALLOCATED \n"); + } + + mutex_unlock(&(dma_ch[channel].dmalock)); + + dma_ch[channel].device_id = device_id; + dma_ch[channel].irq_callback = NULL; + + /* This is to be enabled by putting a restriction - + * you have to request DMA, before doing any operations on + * descriptor/channel + */ + pr_debug("request_dma() : END \n"); + return channel; +} +EXPORT_SYMBOL(request_dma); + +int set_dma_callback(unsigned int channel, dma_interrupt_t callback, void *data) +{ + int ret_irq = 0; + + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + if (callback != NULL) { + int ret_val; + ret_irq = channel2irq(channel); + + dma_ch[channel].data = data; + + ret_val = + request_irq(ret_irq, (void *)callback, IRQF_DISABLED, + dma_ch[channel].device_id, data); + if (ret_val) { + printk(KERN_NOTICE + "Request irq in DMA engine failed.\n"); + return -EPERM; + } + dma_ch[channel].irq_callback = callback; + } + return 0; +} +EXPORT_SYMBOL(set_dma_callback); + +void free_dma(unsigned int channel) +{ + int ret_irq; + + pr_debug("freedma() : BEGIN \n"); + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + /* Halt the DMA */ + disable_dma(channel); + clear_dma_buffer(channel); + + if (dma_ch[channel].irq_callback != NULL) { + ret_irq = channel2irq(channel); + free_irq(ret_irq, dma_ch[channel].data); + } + + /* Clear the DMA Variable in the Channel */ + mutex_lock(&(dma_ch[channel].dmalock)); + dma_ch[channel].chan_status = DMA_CHANNEL_FREE; + mutex_unlock(&(dma_ch[channel].dmalock)); + + pr_debug("freedma() : END \n"); +} +EXPORT_SYMBOL(free_dma); + +void dma_enable_irq(unsigned int channel) +{ + int ret_irq; + + pr_debug("dma_enable_irq() : BEGIN \n"); + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + ret_irq = channel2irq(channel); + enable_irq(ret_irq); +} +EXPORT_SYMBOL(dma_enable_irq); + +void dma_disable_irq(unsigned int channel) +{ + int ret_irq; + + pr_debug("dma_disable_irq() : BEGIN \n"); + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + ret_irq = channel2irq(channel); + disable_irq(ret_irq); +} +EXPORT_SYMBOL(dma_disable_irq); + +int dma_channel_active(unsigned int channel) +{ + if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) { + return 0; + } else { + return 1; + } +} +EXPORT_SYMBOL(dma_channel_active); + +/*------------------------------------------------------------------------------ +* stop the specific DMA channel. +*-----------------------------------------------------------------------------*/ +void disable_dma(unsigned int channel) +{ + pr_debug("stop_dma() : BEGIN \n"); + + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->cfg &= ~DMAEN; /* Clean the enable bit */ + SSYNC(); + dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; + /* Needs to be enabled Later */ + pr_debug("stop_dma() : END \n"); + return; +} +EXPORT_SYMBOL(disable_dma); + +void enable_dma(unsigned int channel) +{ + pr_debug("enable_dma() : BEGIN \n"); + + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED; + dma_ch[channel].regs->curr_x_count = 0; + dma_ch[channel].regs->curr_y_count = 0; + + dma_ch[channel].regs->cfg |= DMAEN; /* Set the enable bit */ + SSYNC(); + pr_debug("enable_dma() : END \n"); + return; +} +EXPORT_SYMBOL(enable_dma); + +/*------------------------------------------------------------------------------ +* Set the Start Address register for the specific DMA channel +* This function can be used for register based DMA, +* to setup the start address +* addr: Starting address of the DMA Data to be transferred. +*-----------------------------------------------------------------------------*/ +void set_dma_start_addr(unsigned int channel, unsigned long addr) +{ + pr_debug("set_dma_start_addr() : BEGIN \n"); + + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->start_addr = addr; + SSYNC(); + pr_debug("set_dma_start_addr() : END\n"); +} +EXPORT_SYMBOL(set_dma_start_addr); + +void set_dma_next_desc_addr(unsigned int channel, unsigned long addr) +{ + pr_debug("set_dma_next_desc_addr() : BEGIN \n"); + + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->next_desc_ptr = addr; + SSYNC(); + pr_debug("set_dma_start_addr() : END\n"); +} +EXPORT_SYMBOL(set_dma_next_desc_addr); + +void set_dma_x_count(unsigned int channel, unsigned short x_count) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->x_count = x_count; + SSYNC(); +} +EXPORT_SYMBOL(set_dma_x_count); + +void set_dma_y_count(unsigned int channel, unsigned short y_count) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->y_count = y_count; + SSYNC(); +} +EXPORT_SYMBOL(set_dma_y_count); + +void set_dma_x_modify(unsigned int channel, short x_modify) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->x_modify = x_modify; + SSYNC(); +} +EXPORT_SYMBOL(set_dma_x_modify); + +void set_dma_y_modify(unsigned int channel, short y_modify) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->y_modify = y_modify; + SSYNC(); +} +EXPORT_SYMBOL(set_dma_y_modify); + +void set_dma_config(unsigned int channel, unsigned short config) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->cfg = config; + SSYNC(); +} +EXPORT_SYMBOL(set_dma_config); + +unsigned short +set_bfin_dma_config(char direction, char flow_mode, + char intr_mode, char dma_mode, char width) +{ + unsigned short config; + + config = + ((direction << 1) | (width << 2) | (dma_mode << 4) | + (intr_mode << 6) | (flow_mode << 12) | RESTART); + return config; +} +EXPORT_SYMBOL(set_bfin_dma_config); + +void set_dma_sg(unsigned int channel, struct dmasg * sg, int nr_sg) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + dma_ch[channel].regs->cfg |= ((nr_sg & 0x0F) << 8); + + dma_ch[channel].regs->next_desc_ptr = (unsigned int)sg; + + SSYNC(); +} +EXPORT_SYMBOL(set_dma_sg); + +/*------------------------------------------------------------------------------ + * Get the DMA status of a specific DMA channel from the system. + *-----------------------------------------------------------------------------*/ +unsigned short get_dma_curr_irqstat(unsigned int channel) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + return dma_ch[channel].regs->irq_status; +} +EXPORT_SYMBOL(get_dma_curr_irqstat); + +/*------------------------------------------------------------------------------ + * Clear the DMA_DONE bit in DMA status. Stop the DMA completion interrupt. + *-----------------------------------------------------------------------------*/ +void clear_dma_irqstat(unsigned int channel) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + dma_ch[channel].regs->irq_status |= 3; +} +EXPORT_SYMBOL(clear_dma_irqstat); + +/*------------------------------------------------------------------------------ + * Get current DMA xcount of a specific DMA channel from the system. + *-----------------------------------------------------------------------------*/ +unsigned short get_dma_curr_xcount(unsigned int channel) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + return dma_ch[channel].regs->curr_x_count; +} +EXPORT_SYMBOL(get_dma_curr_xcount); + +/*------------------------------------------------------------------------------ + * Get current DMA ycount of a specific DMA channel from the system. + *-----------------------------------------------------------------------------*/ +unsigned short get_dma_curr_ycount(unsigned int channel) +{ + BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE + && channel < MAX_BLACKFIN_DMA_CHANNEL)); + + return dma_ch[channel].regs->curr_y_count; +} +EXPORT_SYMBOL(get_dma_curr_ycount); + +void *dma_memcpy(void *dest, const void *src, size_t size) +{ + int direction; /* 1 - address decrease, 0 - address increase */ + int flag_align; /* 1 - address aligned, 0 - address unaligned */ + int flag_2D; /* 1 - 2D DMA needed, 0 - 1D DMA needed */ + + if (size <= 0) + return NULL; + + if ((unsigned long)src < memory_end) + blackfin_dcache_flush_range((unsigned int)src, + (unsigned int)(src + size)); + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + if ((unsigned long)src < (unsigned long)dest) + direction = 1; + else + direction = 0; + + if ((((unsigned long)dest % 2) == 0) && (((unsigned long)src % 2) == 0) + && ((size % 2) == 0)) + flag_align = 1; + else + flag_align = 0; + + if (size > 0x10000) /* size > 64K */ + flag_2D = 1; + else + flag_2D = 0; + + /* Setup destination and source start address */ + if (direction) { + if (flag_align) { + bfin_write_MDMA_D0_START_ADDR(dest + size - 2); + bfin_write_MDMA_S0_START_ADDR(src + size - 2); + } else { + bfin_write_MDMA_D0_START_ADDR(dest + size - 1); + bfin_write_MDMA_S0_START_ADDR(src + size - 1); + } + } else { + bfin_write_MDMA_D0_START_ADDR(dest); + bfin_write_MDMA_S0_START_ADDR(src); + } + + /* Setup destination and source xcount */ + if (flag_2D) { + if (flag_align) { + bfin_write_MDMA_D0_X_COUNT(1024 / 2); + bfin_write_MDMA_S0_X_COUNT(1024 / 2); + } else { + bfin_write_MDMA_D0_X_COUNT(1024); + bfin_write_MDMA_S0_X_COUNT(1024); + } + bfin_write_MDMA_D0_Y_COUNT(size >> 10); + bfin_write_MDMA_S0_Y_COUNT(size >> 10); + } else { + if (flag_align) { + bfin_write_MDMA_D0_X_COUNT(size / 2); + bfin_write_MDMA_S0_X_COUNT(size / 2); + } else { + bfin_write_MDMA_D0_X_COUNT(size); + bfin_write_MDMA_S0_X_COUNT(size); + } + } + + /* Setup destination and source xmodify and ymodify */ + if (direction) { + if (flag_align) { + bfin_write_MDMA_D0_X_MODIFY(-2); + bfin_write_MDMA_S0_X_MODIFY(-2); + if (flag_2D) { + bfin_write_MDMA_D0_Y_MODIFY(-2); + bfin_write_MDMA_S0_Y_MODIFY(-2); + } + } else { + bfin_write_MDMA_D0_X_MODIFY(-1); + bfin_write_MDMA_S0_X_MODIFY(-1); + if (flag_2D) { + bfin_write_MDMA_D0_Y_MODIFY(-1); + bfin_write_MDMA_S0_Y_MODIFY(-1); + } + } + } else { + if (flag_align) { + bfin_write_MDMA_D0_X_MODIFY(2); + bfin_write_MDMA_S0_X_MODIFY(2); + if (flag_2D) { + bfin_write_MDMA_D0_Y_MODIFY(2); + bfin_write_MDMA_S0_Y_MODIFY(2); + } + } else { + bfin_write_MDMA_D0_X_MODIFY(1); + bfin_write_MDMA_S0_X_MODIFY(1); + if (flag_2D) { + bfin_write_MDMA_D0_Y_MODIFY(1); + bfin_write_MDMA_S0_Y_MODIFY(1); + } + } + } + + /* Enable source DMA */ + if (flag_2D) { + if (flag_align) { + bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D | WDSIZE_16); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D | WDSIZE_16); + } else { + bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D); + } + } else { + if (flag_align) { + bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); + } else { + bfin_write_MDMA_S0_CONFIG(DMAEN); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN); + } + } + + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + ; + + bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | + (DMA_DONE | DMA_ERR)); + + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + + if ((unsigned long)dest < memory_end) + blackfin_dcache_invalidate_range((unsigned int)dest, + (unsigned int)(dest + size)); + + return dest; +} +EXPORT_SYMBOL(dma_memcpy); + +void *safe_dma_memcpy(void *dest, const void *src, size_t size) +{ + int flags = 0; + void *addr; + local_irq_save(flags); + addr = dma_memcpy(dest, src, size); + local_irq_restore(flags); + return addr; +} +EXPORT_SYMBOL(safe_dma_memcpy); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c new file mode 100644 index 0000000000..e9f24a9a46 --- /dev/null +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -0,0 +1,637 @@ +/* + * File: arch/blackfin/kernel/bfin_gpio.c + * Based on: + * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) + * + * Created: + * Description: GPIO Abstraction Layer + * + * Modified: + * Copyright 2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +* Number BF537/6/4 BF561 BF533/2/1 +* +* GPIO_0 PF0 PF0 PF0 +* GPIO_1 PF1 PF1 PF1 +* GPIO_2 PF2 PF2 PF2 +* GPIO_3 PF3 PF3 PF3 +* GPIO_4 PF4 PF4 PF4 +* GPIO_5 PF5 PF5 PF5 +* GPIO_6 PF6 PF6 PF6 +* GPIO_7 PF7 PF7 PF7 +* GPIO_8 PF8 PF8 PF8 +* GPIO_9 PF9 PF9 PF9 +* GPIO_10 PF10 PF10 PF10 +* GPIO_11 PF11 PF11 PF11 +* GPIO_12 PF12 PF12 PF12 +* GPIO_13 PF13 PF13 PF13 +* GPIO_14 PF14 PF14 PF14 +* GPIO_15 PF15 PF15 PF15 +* GPIO_16 PG0 PF16 +* GPIO_17 PG1 PF17 +* GPIO_18 PG2 PF18 +* GPIO_19 PG3 PF19 +* GPIO_20 PG4 PF20 +* GPIO_21 PG5 PF21 +* GPIO_22 PG6 PF22 +* GPIO_23 PG7 PF23 +* GPIO_24 PG8 PF24 +* GPIO_25 PG9 PF25 +* GPIO_26 PG10 PF26 +* GPIO_27 PG11 PF27 +* GPIO_28 PG12 PF28 +* GPIO_29 PG13 PF29 +* GPIO_30 PG14 PF30 +* GPIO_31 PG15 PF31 +* GPIO_32 PH0 PF32 +* GPIO_33 PH1 PF33 +* GPIO_34 PH2 PF34 +* GPIO_35 PH3 PF35 +* GPIO_36 PH4 PF36 +* GPIO_37 PH5 PF37 +* GPIO_38 PH6 PF38 +* GPIO_39 PH7 PF39 +* GPIO_40 PH8 PF40 +* GPIO_41 PH9 PF41 +* GPIO_42 PH10 PF42 +* GPIO_43 PH11 PF43 +* GPIO_44 PH12 PF44 +* GPIO_45 PH13 PF45 +* GPIO_46 PH14 PF46 +* GPIO_47 PH15 PF47 +*/ + +#include +#include +#include +#include +#include + +#ifdef BF533_FAMILY +static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { + (struct gpio_port_t *) FIO_FLAG_D, +}; +#endif + +#ifdef BF537_FAMILY +static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { + (struct gpio_port_t *) PORTFIO, + (struct gpio_port_t *) PORTGIO, + (struct gpio_port_t *) PORTHIO, +}; + +static unsigned short *port_fer[gpio_bank(MAX_BLACKFIN_GPIOS)] = { + (unsigned short *) PORTF_FER, + (unsigned short *) PORTG_FER, + (unsigned short *) PORTH_FER, +}; + +#endif + +#ifdef BF561_FAMILY +static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { + (struct gpio_port_t *) FIO0_FLAG_D, + (struct gpio_port_t *) FIO1_FLAG_D, + (struct gpio_port_t *) FIO2_FLAG_D, +}; +#endif + +static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; + +#ifdef CONFIG_PM +static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; +static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; +static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)]; + +#ifdef BF533_FAMILY +static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB}; +#endif + +#ifdef BF537_FAMILY +static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX}; +#endif + +#ifdef BF561_FAMILY +static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; +#endif + +#endif /* CONFIG_PM */ + +inline int check_gpio(unsigned short gpio) +{ + if (gpio > MAX_BLACKFIN_GPIOS) + return -EINVAL; + return 0; +} + +#ifdef BF537_FAMILY +void port_setup(unsigned short gpio, unsigned short usage) +{ + if (usage == GPIO_USAGE) { + if (*port_fer[gpio_bank(gpio)] & gpio_bit(gpio)) + printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral " + "usage and GPIO %d detected!\n", gpio); + *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); + } else + *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); + SSYNC(); +} +#else +# define port_setup(...) do { } while (0) +#endif + + +void default_gpio(unsigned short gpio) +{ + unsigned short bank,bitmask; + + bank = gpio_bank(gpio); + bitmask = gpio_bit(gpio); + + gpio_bankb[bank]->maska_clear = bitmask; + gpio_bankb[bank]->maskb_clear = bitmask; + SSYNC(); + gpio_bankb[bank]->inen &= ~bitmask; + gpio_bankb[bank]->dir &= ~bitmask; + gpio_bankb[bank]->polar &= ~bitmask; + gpio_bankb[bank]->both &= ~bitmask; + gpio_bankb[bank]->edge &= ~bitmask; +} + + +int __init bfin_gpio_init(void) +{ + int i; + + printk(KERN_INFO "Blackfin GPIO Controller\n"); + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) + reserved_map[gpio_bank(i)] = 0; + +#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) +# if defined(CONFIG_BFIN_MAC_RMII) + reserved_map[PORT_H] = 0xC373; +# else + reserved_map[PORT_H] = 0xFFFF; +# endif +#endif + + return 0; +} + +arch_initcall(bfin_gpio_init); + + +/*********************************************************** +* +* FUNCTIONS: Blackfin General Purpose Ports Access Functions +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* +* +* DESCRIPTION: These functions abstract direct register access +* to Blackfin processor General Purpose +* Ports Regsiters +* +* CAUTION: These functions do not belong to the GPIO Driver API +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +/* Set a specific bit */ + +#define SET_GPIO(name) \ +void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +{ \ + unsigned long flags; \ + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ + local_irq_save(flags); \ + if (arg) \ + gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ + else \ + gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ + local_irq_restore(flags); \ +} \ +EXPORT_SYMBOL(set_gpio_ ## name); + +SET_GPIO(dir) +SET_GPIO(inen) +SET_GPIO(polar) +SET_GPIO(edge) +SET_GPIO(both) + + +#define SET_GPIO_SC(name) \ +void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +{ \ + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ + if (arg) \ + gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ + else \ + gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ +} \ +EXPORT_SYMBOL(set_gpio_ ## name); + +SET_GPIO_SC(maska) +SET_GPIO_SC(maskb) + +#if defined(ANOMALY_05000311) +void set_gpio_data(unsigned short gpio, unsigned short arg) +{ + unsigned long flags; + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); + local_irq_save(flags); + if (arg) + gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + else + gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + bfin_read_CHIPID(); + local_irq_restore(flags); +} +EXPORT_SYMBOL(set_gpio_data); +#else +SET_GPIO_SC(data) +#endif + + +#if defined(ANOMALY_05000311) +void set_gpio_toggle(unsigned short gpio) +{ + unsigned long flags; + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); + local_irq_save(flags); + gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); + bfin_read_CHIPID(); + local_irq_restore(flags); +} +#else +void set_gpio_toggle(unsigned short gpio) +{ + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); + gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); +} +#endif +EXPORT_SYMBOL(set_gpio_toggle); + + +/*Set current PORT date (16-bit word)*/ + +#define SET_GPIO_P(name) \ +void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ +{ \ + gpio_bankb[gpio_bank(gpio)]->name = arg; \ +} \ +EXPORT_SYMBOL(set_gpiop_ ## name); + +SET_GPIO_P(dir) +SET_GPIO_P(inen) +SET_GPIO_P(polar) +SET_GPIO_P(edge) +SET_GPIO_P(both) +SET_GPIO_P(maska) +SET_GPIO_P(maskb) + + +#if defined(ANOMALY_05000311) +void set_gpiop_data(unsigned short gpio, unsigned short arg) +{ + unsigned long flags; + local_irq_save(flags); + gpio_bankb[gpio_bank(gpio)]->data = arg; + bfin_read_CHIPID(); + local_irq_restore(flags); +} +EXPORT_SYMBOL(set_gpiop_data); +#else +SET_GPIO_P(data) +#endif + + + +/* Get a specific bit */ + +#define GET_GPIO(name) \ +unsigned short get_gpio_ ## name(unsigned short gpio) \ +{ \ + return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ +} \ +EXPORT_SYMBOL(get_gpio_ ## name); + +GET_GPIO(dir) +GET_GPIO(inen) +GET_GPIO(polar) +GET_GPIO(edge) +GET_GPIO(both) +GET_GPIO(maska) +GET_GPIO(maskb) + + +#if defined(ANOMALY_05000311) +unsigned short get_gpio_data(unsigned short gpio) +{ + unsigned long flags; + unsigned short ret; + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); + local_irq_save(flags); + ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)); + bfin_read_CHIPID(); + local_irq_restore(flags); + return ret; +} +EXPORT_SYMBOL(get_gpio_data); +#else +GET_GPIO(data) +#endif + +/*Get current PORT date (16-bit word)*/ + +#define GET_GPIO_P(name) \ +unsigned short get_gpiop_ ## name(unsigned short gpio) \ +{ \ + return (gpio_bankb[gpio_bank(gpio)]->name);\ +} \ +EXPORT_SYMBOL(get_gpiop_ ## name); + +GET_GPIO_P(dir) +GET_GPIO_P(inen) +GET_GPIO_P(polar) +GET_GPIO_P(edge) +GET_GPIO_P(both) +GET_GPIO_P(maska) +GET_GPIO_P(maskb) + +#if defined(ANOMALY_05000311) +unsigned short get_gpiop_data(unsigned short gpio) +{ + unsigned long flags; + unsigned short ret; + local_irq_save(flags); + ret = gpio_bankb[gpio_bank(gpio)]->data; + bfin_read_CHIPID(); + local_irq_restore(flags); + return ret; +} +EXPORT_SYMBOL(get_gpiop_data); +#else +GET_GPIO_P(data) +#endif + +#ifdef CONFIG_PM +/*********************************************************** +* +* FUNCTIONS: Blackfin PM Setup API +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* type - +* PM_WAKE_RISING +* PM_WAKE_FALLING +* PM_WAKE_HIGH +* PM_WAKE_LOW +* PM_WAKE_BOTH_EDGES +* +* DESCRIPTION: Blackfin PM Driver API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ +int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) +{ + unsigned long flags; + + if ((check_gpio(gpio) < 0) || !type) + return -EINVAL; + + local_irq_save(flags); + + wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio); + wakeup_flags_map[gpio] = type; + local_irq_restore(flags); + + return 0; +} +EXPORT_SYMBOL(gpio_pm_wakeup_request); + +void gpio_pm_wakeup_free(unsigned short gpio) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return; + + local_irq_save(flags); + + wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_pm_wakeup_free); + +static int bfin_gpio_wakeup_type(unsigned short gpio, unsigned char type) +{ + port_setup(gpio, GPIO_USAGE); + set_gpio_dir(gpio, 0); + set_gpio_inen(gpio, 1); + + if (type & (PM_WAKE_RISING | PM_WAKE_FALLING)) + set_gpio_edge(gpio, 1); + else + set_gpio_edge(gpio, 0); + + if ((type & (PM_WAKE_BOTH_EDGES)) == (PM_WAKE_BOTH_EDGES)) + set_gpio_both(gpio, 1); + else + set_gpio_both(gpio, 0); + + if ((type & (PM_WAKE_FALLING | PM_WAKE_LOW))) + set_gpio_polar(gpio, 1); + else + set_gpio_polar(gpio, 0); + + SSYNC(); + + return 0; +} + +u32 gpio_pm_setup(void) +{ + u32 sic_iwr = 0; + u16 bank, mask, i, gpio; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) { + mask = wakeup_map[gpio_bank(i)]; + bank = gpio_bank(i); + + gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb; + gpio_bankb[bank]->maskb = 0; + + if (mask) { +#ifdef BF537_FAMILY + gpio_bank_saved[bank].fer = *port_fer[bank]; +#endif + gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; + gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; + gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; + gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; + gpio_bank_saved[bank].both = gpio_bankb[bank]->both; + + gpio = i; + + while (mask) { + if (mask & 1) { + bfin_gpio_wakeup_type(gpio, wakeup_flags_map[gpio]); + set_gpio_data(gpio, 0); /*Clear*/ + } + gpio++; + mask >>= 1; + } + + sic_iwr |= 1 << (sic_iwr_irqs[bank] - (IRQ_CORETMR + 1)); + gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)]; + } + } + + if (sic_iwr) + return sic_iwr; + else + return IWR_ENABLE_ALL; +} + + +void gpio_pm_restore(void) +{ + u16 bank, mask, i; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) { + mask = wakeup_map[gpio_bank(i)]; + bank = gpio_bank(i); + + if (mask) { +#ifdef BF537_FAMILY + *port_fer[bank] = gpio_bank_saved[bank].fer; +#endif + gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; + gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; + gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; + gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; + gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + } + + gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb; + } +} + +#endif + +/*********************************************************** +* +* FUNCTIONS: Blackfin GPIO Driver +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* +* +* DESCRIPTION: Blackfin GPIO Driver API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +int gpio_request(unsigned short gpio, const char *label) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return -EINVAL; + + local_irq_save(flags); + + if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio); + dump_stack(); + local_irq_restore(flags); + return -EBUSY; + } + reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio); + + local_irq_restore(flags); + + port_setup(gpio, GPIO_USAGE); + + return 0; +} +EXPORT_SYMBOL(gpio_request); + + +void gpio_free(unsigned short gpio) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return; + + local_irq_save(flags); + + if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio); + dump_stack(); + local_irq_restore(flags); + return; + } + + default_gpio(gpio); + + reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_free); + + +void gpio_direction_input(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); + gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_input); + +void gpio_direction_output(unsigned short gpio) +{ + unsigned long flags; + + BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); + + local_irq_save(flags); + gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); + gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_direction_output); diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c new file mode 100644 index 0000000000..f64ecb638f --- /dev/null +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -0,0 +1,119 @@ +/* + * File: arch/blackfin/kernel/bfin_ksyms.c + * Based on: none - original work + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +/* platform dependent support */ + +EXPORT_SYMBOL(__ioremap); +EXPORT_SYMBOL(strcmp); +EXPORT_SYMBOL(strncmp); +EXPORT_SYMBOL(dump_thread); + +EXPORT_SYMBOL(ip_fast_csum); + +EXPORT_SYMBOL(kernel_thread); + +EXPORT_SYMBOL(__up); +EXPORT_SYMBOL(__down); +EXPORT_SYMBOL(__down_trylock); +EXPORT_SYMBOL(__down_interruptible); + +EXPORT_SYMBOL(is_in_rom); + +/* Networking helper routines. */ +EXPORT_SYMBOL(csum_partial_copy); + +/* The following are special because they're not called + * explicitly (the C compiler generates them). Fortunately, + * their interface isn't gonna change any time soon now, so + * it's OK to leave it out of version control. + */ +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memcmp); +EXPORT_SYMBOL(memmove); +EXPORT_SYMBOL(memchr); +EXPORT_SYMBOL(get_wchan); + +/* + * libgcc functions - functions that are used internally by the + * compiler... (prototypes are not correct though, but that + * doesn't really matter since they're not versioned). + */ +extern void __ashldi3(void); +extern void __ashrdi3(void); +extern void __smulsi3_highpart(void); +extern void __umulsi3_highpart(void); +extern void __divsi3(void); +extern void __lshrdi3(void); +extern void __modsi3(void); +extern void __muldi3(void); +extern void __udivsi3(void); +extern void __umodsi3(void); + +/* gcc lib functions */ +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__umulsi3_highpart); +EXPORT_SYMBOL(__smulsi3_highpart); +EXPORT_SYMBOL(__divsi3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__modsi3); +EXPORT_SYMBOL(__muldi3); +EXPORT_SYMBOL(__udivsi3); +EXPORT_SYMBOL(__umodsi3); + +EXPORT_SYMBOL(outsb); +EXPORT_SYMBOL(insb); +EXPORT_SYMBOL(outsw); +EXPORT_SYMBOL(insw); +EXPORT_SYMBOL(outsl); +EXPORT_SYMBOL(insl); +EXPORT_SYMBOL(irq_flags); +EXPORT_SYMBOL(iounmap); +EXPORT_SYMBOL(blackfin_dcache_invalidate_range); +EXPORT_SYMBOL(blackfin_icache_dcache_flush_range); +EXPORT_SYMBOL(blackfin_icache_flush_range); +EXPORT_SYMBOL(blackfin_dcache_flush_range); +EXPORT_SYMBOL(blackfin_dflush_page); + +EXPORT_SYMBOL(csum_partial); +EXPORT_SYMBOL(__init_begin); +EXPORT_SYMBOL(__init_end); +EXPORT_SYMBOL(_ebss_l1); +EXPORT_SYMBOL(_stext_l1); +EXPORT_SYMBOL(_etext_l1); +EXPORT_SYMBOL(_sdata_l1); +EXPORT_SYMBOL(_ebss_b_l1); +EXPORT_SYMBOL(_sdata_b_l1); diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c new file mode 100644 index 0000000000..539eb24e06 --- /dev/null +++ b/arch/blackfin/kernel/dma-mapping.c @@ -0,0 +1,183 @@ +/* + * File: arch/blackfin/kernel/dma-mapping.c + * Based on: + * Author: + * + * Created: + * Description: Dynamic DMA mapping support. + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static spinlock_t dma_page_lock; +static unsigned int *dma_page; +static unsigned int dma_pages; +static unsigned long dma_base; +static unsigned long dma_size; +static unsigned int dma_initialized; + +void dma_alloc_init(unsigned long start, unsigned long end) +{ + spin_lock_init(&dma_page_lock); + dma_initialized = 0; + + dma_page = (unsigned int *)__get_free_page(GFP_KERNEL); + memset(dma_page, 0, PAGE_SIZE); + dma_base = PAGE_ALIGN(start); + dma_size = PAGE_ALIGN(end) - PAGE_ALIGN(start); + dma_pages = dma_size >> PAGE_SHIFT; + memset((void *)dma_base, 0, DMA_UNCACHED_REGION); + dma_initialized = 1; + + printk(KERN_INFO "%s: dma_page @ 0x%p - %d pages at 0x%08lx\n", __FUNCTION__, + dma_page, dma_pages, dma_base); +} + +static inline unsigned int get_pages(size_t size) +{ + return ((size - 1) >> PAGE_SHIFT) + 1; +} + +static unsigned long __alloc_dma_pages(unsigned int pages) +{ + unsigned long ret = 0, flags; + int i, count = 0; + + if (dma_initialized == 0) + dma_alloc_init(_ramend - DMA_UNCACHED_REGION, _ramend); + + spin_lock_irqsave(&dma_page_lock, flags); + + for (i = 0; i < dma_pages;) { + if (dma_page[i++] == 0) { + if (++count == pages) { + while (count--) + dma_page[--i] = 1; + ret = dma_base + (i << PAGE_SHIFT); + break; + } + } else + count = 0; + } + spin_unlock_irqrestore(&dma_page_lock, flags); + return ret; +} + +static void __free_dma_pages(unsigned long addr, unsigned int pages) +{ + unsigned long page = (addr - dma_base) >> PAGE_SHIFT; + unsigned long flags; + int i; + + if ((page + pages) > dma_pages) { + printk(KERN_ERR "%s: freeing outside range.\n", __FUNCTION__); + BUG(); + } + + spin_lock_irqsave(&dma_page_lock, flags); + for (i = page; i < page + pages; i++) { + dma_page[i] = 0; + } + spin_unlock_irqrestore(&dma_page_lock, flags); +} + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, gfp_t gfp) +{ + void *ret; + + ret = (void *)__alloc_dma_pages(get_pages(size)); + + if (ret) { + memset(ret, 0, size); + *dma_handle = virt_to_phys(ret); + } + + return ret; +} +EXPORT_SYMBOL(dma_alloc_coherent); + +void +dma_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + __free_dma_pages((unsigned long)vaddr, get_pages(size)); +} +EXPORT_SYMBOL(dma_free_coherent); + +/* + * Dummy functions defined for some existing drivers + */ + +dma_addr_t +dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + invalidate_dcache_range((unsigned long)ptr, + (unsigned long)ptr + size); + + return (dma_addr_t) ptr; +} +EXPORT_SYMBOL(dma_map_single); + +int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nents; i++) + invalidate_dcache_range(sg_dma_address(&sg[i]), + sg_dma_address(&sg[i]) + + sg_dma_len(&sg[i])); + + return nents; +} +EXPORT_SYMBOL(dma_map_sg); + +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} +EXPORT_SYMBOL(dma_unmap_single); + +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} +EXPORT_SYMBOL(dma_unmap_sg); diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c new file mode 100644 index 0000000000..8b89c99f9d --- /dev/null +++ b/arch/blackfin/kernel/dualcore_test.c @@ -0,0 +1,49 @@ +/* + * File: arch/blackfin/kernel/dualcore_test.c + * Based on: + * Author: + * + * Created: + * Description: Small test code for CoreB on a BF561 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +static int *testarg = (int*)0xfeb00000; + +static int test_init(void) +{ + *testarg = 1; + printk("Dual core test module inserted: set testarg = [%d]\n @ [%p]\n", + *testarg, testarg); + return 0; +} + +static void test_exit(void) +{ + printk("Dual core test module removed: testarg = [%d]\n", *testarg); +} + +module_init(test_init); +module_exit(test_exit); diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S new file mode 100644 index 0000000000..5880b270bd --- /dev/null +++ b/arch/blackfin/kernel/entry.S @@ -0,0 +1,94 @@ +/* + * File: arch/blackfin/kernel/entry.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include + +#include + +#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 +.section .l1.text +#else +.text +#endif + +ENTRY(_ret_from_fork) + SP += -12; + call _schedule_tail; + SP += 12; + r0 = [sp + PT_IPEND]; + cc = bittst(r0,1); + if cc jump .Lin_kernel; + RESTORE_CONTEXT + rti; +.Lin_kernel: + bitclr(r0,1); + [sp + PT_IPEND] = r0; + /* do a 'fake' RTI by jumping to [RETI] + * to avoid clearing supervisor mode in child + */ + RESTORE_ALL_SYS + p0 = reti; + jump (p0); + +ENTRY(_sys_fork) + r0 = -EINVAL; + rts; + +ENTRY(_sys_vfork) + r0 = sp; + r0 += 24; + [--sp] = rets; + SP += -12; + call _bfin_vfork; + SP += 12; + rets = [sp++]; + rts; + +ENTRY(_sys_clone) + r0 = sp; + r0 += 24; + [--sp] = rets; + SP += -12; + call _bfin_clone; + SP += 12; + rets = [sp++]; + rts; + +ENTRY(_sys_rt_sigreturn) + r0 = sp; + r0 += 24; + [--sp] = rets; + SP += -12; + call _do_rt_sigreturn; + SP += 12; + rets = [sp++]; + rts; diff --git a/arch/blackfin/kernel/flat.c b/arch/blackfin/kernel/flat.c new file mode 100644 index 0000000000..a92587b628 --- /dev/null +++ b/arch/blackfin/kernel/flat.c @@ -0,0 +1,101 @@ +/* + * arch/blackfin/kernel/flat.c + * + * Copyright (C) 2007 Analog Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#define FLAT_BFIN_RELOC_TYPE_16_BIT 0 +#define FLAT_BFIN_RELOC_TYPE_16H_BIT 1 +#define FLAT_BFIN_RELOC_TYPE_32_BIT 2 + +unsigned long bfin_get_addr_from_rp(unsigned long *ptr, + unsigned long relval, + unsigned long flags, + unsigned long *persistent) +{ + unsigned short *usptr = (unsigned short *)ptr; + int type = (relval >> 26) & 7; + unsigned long val; + + switch (type) { + case FLAT_BFIN_RELOC_TYPE_16_BIT: + case FLAT_BFIN_RELOC_TYPE_16H_BIT: + usptr = (unsigned short *)ptr; + pr_debug("*usptr = %x", get_unaligned(usptr)); + val = get_unaligned(usptr); + val += *persistent; + break; + + case FLAT_BFIN_RELOC_TYPE_32_BIT: + pr_debug("*ptr = %lx", get_unaligned(ptr)); + val = get_unaligned(ptr); + break; + + default: + pr_debug("BINFMT_FLAT: Unknown relocation type %x\n", + type); + + return 0; + } + + /* + * Stack-relative relocs contain the offset into the stack, we + * have to add the stack's start address here and return 1 from + * flat_addr_absolute to prevent the normal address calculations + */ + if (relval & (1 << 29)) + return val + current->mm->context.end_brk; + + if ((flags & FLAT_FLAG_GOTPIC) == 0) + val = htonl(val); + return val; +} +EXPORT_SYMBOL(bfin_get_addr_from_rp); + +/* + * Insert the address ADDR into the symbol reference at RP; + * RELVAL is the raw relocation-table entry from which RP is derived + */ +void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr, + unsigned long relval) +{ + unsigned short *usptr = (unsigned short *)ptr; + int type = (relval >> 26) & 7; + + switch (type) { + case FLAT_BFIN_RELOC_TYPE_16_BIT: + put_unaligned(addr, usptr); + pr_debug("new value %x at %p", get_unaligned(usptr), + usptr); + break; + + case FLAT_BFIN_RELOC_TYPE_16H_BIT: + put_unaligned(addr >> 16, usptr); + pr_debug("new value %x", get_unaligned(usptr)); + break; + + case FLAT_BFIN_RELOC_TYPE_32_BIT: + put_unaligned(addr, ptr); + pr_debug("new ptr =%lx", get_unaligned(ptr)); + break; + } +} +EXPORT_SYMBOL(bfin_put_addr_at_rp); diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c new file mode 100644 index 0000000000..b45188f851 --- /dev/null +++ b/arch/blackfin/kernel/init_task.c @@ -0,0 +1,60 @@ +/* + * File: arch/blackfin/kernel/init_task.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include + +static struct fs_struct init_fs = INIT_FS; +static struct files_struct init_files = INIT_FILES; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); + +struct mm_struct init_mm = INIT_MM(init_mm); +EXPORT_SYMBOL(init_mm); + +/* + * Initial task structure. + * + * All other task structs will be allocated on slabs in fork.c + */ +struct task_struct init_task = INIT_TASK(init_task); +EXPORT_SYMBOL(init_task); + +/* + * Initial thread structure. + * + * We need to make sure that this is 8192-byte aligned due to the + * way process stacks are handled. This is done by having a special + * "init_task" linker map entry. + */ +union thread_union init_thread_union + __attribute__ ((__section__(".data.init_task"))) = { +INIT_THREAD_INFO(init_task)}; diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c new file mode 100644 index 0000000000..df5bf022cf --- /dev/null +++ b/arch/blackfin/kernel/irqchip.c @@ -0,0 +1,147 @@ +/* + * File: arch/blackfin/kernel/irqchip.c + * Based on: + * Author: + * + * Created: + * Description: This file contains the simple DMA Implementation for Blackfin + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +static unsigned long irq_err_count; +static spinlock_t irq_controller_lock; + +/* + * Dummy mask/unmask handler + */ +void dummy_mask_unmask_irq(unsigned int irq) +{ +} + +void ack_bad_irq(unsigned int irq) +{ + irq_err_count += 1; + printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq); +} +EXPORT_SYMBOL(ack_bad_irq); + +static struct irq_chip bad_chip = { + .ack = dummy_mask_unmask_irq, + .mask = dummy_mask_unmask_irq, + .unmask = dummy_mask_unmask_irq, +}; + +static struct irq_desc bad_irq_desc = { + .chip = &bad_chip, + .handle_irq = handle_bad_irq, + .depth = 1, +}; + +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v; + struct irqaction *action; + unsigned long flags; + + if (i < NR_IRQS) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto unlock; + + seq_printf(p, "%3d: %10u ", i, kstat_irqs(i)); + seq_printf(p, " %s", action->name); + for (action = action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + + seq_putc(p, '\n'); + unlock: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } else if (i == NR_IRQS) { + seq_printf(p, "Err: %10lu\n", irq_err_count); + } + return 0; +} + +/* + * do_IRQ handles all hardware IRQ's. Decoded IRQs should not + * come via this function. Instead, they should provide their + * own 'handler' + */ + +#ifdef CONFIG_DO_IRQ_L1 +asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)__attribute__((l1_text)); +#endif + +asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +{ + struct pt_regs *old_regs; + struct irq_desc *desc = irq_desc + irq; + unsigned short pending, other_ints; + + old_regs = set_irq_regs(regs); + + /* + * Some hardware gives randomly wrong interrupts. Rather + * than crashing, do something sensible. + */ + if (irq >= NR_IRQS) + desc = &bad_irq_desc; + + irq_enter(); + + generic_handle_irq(irq); + + /* If we're the only interrupt running (ignoring IRQ15 which is for + syscalls), lower our priority to IRQ14 so that softirqs run at + that level. If there's another, lower-level interrupt, irq_exit + will defer softirqs to that. */ + CSYNC(); + pending = bfin_read_IPEND() & ~0x8000; + other_ints = pending & (pending - 1); + if (other_ints == 0) + lower_to_irq14(); + irq_exit(); + + set_irq_regs(old_regs); +} + +void __init init_IRQ(void) +{ + struct irq_desc *desc; + int irq; + + spin_lock_init(&irq_controller_lock); + for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) { + *desc = bad_irq_desc; + } + + init_arch_irq(); +} diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c new file mode 100644 index 0000000000..372f756f1a --- /dev/null +++ b/arch/blackfin/kernel/module.c @@ -0,0 +1,429 @@ +/* + * File: arch/blackfin/kernel/module.c + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * handle arithmetic relocations. + * See binutils/bfd/elf32-bfin.c for more details + */ +#define RELOC_STACK_SIZE 100 +static uint32_t reloc_stack[RELOC_STACK_SIZE]; +static unsigned int reloc_stack_tos; + +#define is_reloc_stack_empty() ((reloc_stack_tos > 0)?0:1) + +static void reloc_stack_push(uint32_t value) +{ + reloc_stack[reloc_stack_tos++] = value; +} + +static uint32_t reloc_stack_pop(void) +{ + return reloc_stack[--reloc_stack_tos]; +} + +static uint32_t reloc_stack_operate(unsigned int oper, struct module *mod) +{ + uint32_t value; + + switch (oper) { + case R_add: + value = reloc_stack[reloc_stack_tos - 2] + + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_sub: + value = reloc_stack[reloc_stack_tos - 2] - + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_mult: + value = reloc_stack[reloc_stack_tos - 2] * + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_div: + value = reloc_stack[reloc_stack_tos - 2] / + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_mod: + value = reloc_stack[reloc_stack_tos - 2] % + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_lshift: + value = reloc_stack[reloc_stack_tos - 2] << + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_rshift: + value = reloc_stack[reloc_stack_tos - 2] >> + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_and: + value = reloc_stack[reloc_stack_tos - 2] & + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_or: + value = reloc_stack[reloc_stack_tos - 2] | + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_xor: + value = reloc_stack[reloc_stack_tos - 2] ^ + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_land: + value = reloc_stack[reloc_stack_tos - 2] && + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_lor: + value = reloc_stack[reloc_stack_tos - 2] || + reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 2; + break; + case R_neg: + value = -reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos--; + break; + case R_comp: + value = ~reloc_stack[reloc_stack_tos - 1]; + reloc_stack_tos -= 1; + break; + default: + printk(KERN_WARNING "module %s: unhandled reloction\n", + mod->name); + return 0; + } + + /* now push the new value back on stack */ + reloc_stack_push(value); + + return value; +} + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + return vmalloc(size); +} + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); +} + +/* Transfer the section to the L1 memory */ +int +module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, + char *secstrings, struct module *mod) +{ + Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + void *dest = NULL; + + for (s = sechdrs; s < sechdrs_end; ++s) { + if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) || + ((strcmp(".text", secstrings + s->sh_name)==0) && + (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) { + mod->arch.text_l1 = s; + dest = l1_inst_sram_alloc(s->sh_size); + if (dest == NULL) { + printk(KERN_ERR + "module %s: L1 instruction memory allocation failed\n", + mod->name); + return -1; + } + dma_memcpy(dest, (void *)s->sh_addr, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } + if ((strcmp(".l1.data", secstrings + s->sh_name) == 0)|| + ((strcmp(".data", secstrings + s->sh_name)==0) && + (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { + mod->arch.data_a_l1 = s; + dest = l1_data_sram_alloc(s->sh_size); + if (dest == NULL) { + printk(KERN_ERR + "module %s: L1 data memory allocation failed\n", + mod->name); + return -1; + } + memcpy(dest, (void *)s->sh_addr, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } + if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 || + ((strcmp(".bss", secstrings + s->sh_name)==0) && + (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { + mod->arch.bss_a_l1 = s; + dest = l1_data_sram_alloc(s->sh_size); + if (dest == NULL) { + printk(KERN_ERR + "module %s: L1 data memory allocation failed\n", + mod->name); + return -1; + } + memset(dest, 0, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } + if (strcmp(".l1.data.B", secstrings + s->sh_name) == 0) { + mod->arch.data_b_l1 = s; + dest = l1_data_B_sram_alloc(s->sh_size); + if (dest == NULL) { + printk(KERN_ERR + "module %s: L1 data memory allocation failed\n", + mod->name); + return -1; + } + memcpy(dest, (void *)s->sh_addr, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } + if (strcmp(".l1.bss.B", secstrings + s->sh_name) == 0) { + mod->arch.bss_b_l1 = s; + dest = l1_data_B_sram_alloc(s->sh_size); + if (dest == NULL) { + printk(KERN_ERR + "module %s: L1 data memory allocation failed\n", + mod->name); + return -1; + } + memset(dest, 0, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } + } + return 0; +} + +int +apply_relocate(Elf_Shdr * sechdrs, const char *strtab, + unsigned int symindex, unsigned int relsec, struct module *me) +{ + printk(KERN_ERR "module %s: .rel unsupported\n", me->name); + return -ENOEXEC; +} + +/*************************************************************************/ +/* FUNCTION : apply_relocate_add */ +/* ABSTRACT : Blackfin specific relocation handling for the loadable */ +/* modules. Modules are expected to be .o files. */ +/* Arithmetic relocations are handled. */ +/* We do not expect LSETUP to be split and hence is not */ +/* handled. */ +/* R_byte and R_byte2 are also not handled as the gas */ +/* does not generate it. */ +/*************************************************************************/ +int +apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, + unsigned int symindex, unsigned int relsec, + struct module *mod) +{ + unsigned int i; + unsigned short tmp; + Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + uint32_t *location32; + uint16_t *location16; + uint32_t value; + + pr_debug("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + location16 = + (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset); + location32 = (uint32_t *) location16; + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym = (Elf32_Sym *) sechdrs[symindex].sh_addr + + ELF32_R_SYM(rel[i].r_info); + if (is_reloc_stack_empty()) { + value = sym->st_value; + } else { + value = reloc_stack_pop(); + } + value += rel[i].r_addend; + pr_debug("location is %x, value is %x type is %d \n", + (unsigned int) location32, value, + ELF32_R_TYPE(rel[i].r_info)); + + switch (ELF32_R_TYPE(rel[i].r_info)) { + + case R_pcrel24: + case R_pcrel24_jump_l: + /* Add the value, subtract its postition */ + location16 = + (uint16_t *) (sechdrs[sechdrs[relsec].sh_info]. + sh_addr + rel[i].r_offset - 2); + location32 = (uint32_t *) location16; + value -= (uint32_t) location32; + value >>= 1; + pr_debug("value is %x, before %x-%x after %x-%x\n", value, + *location16, *(location16 + 1), + (*location16 & 0xff00) | (value >> 16 & 0x00ff), + value & 0xffff); + *location16 = + (*location16 & 0xff00) | (value >> 16 & 0x00ff); + *(location16 + 1) = value & 0xffff; + break; + case R_pcrel12_jump: + case R_pcrel12_jump_s: + value -= (uint32_t) location32; + value >>= 1; + *location16 = (value & 0xfff); + break; + case R_pcrel10: + value -= (uint32_t) location32; + value >>= 1; + *location16 = (value & 0x3ff); + break; + case R_luimm16: + pr_debug("before %x after %x\n", *location16, + (value & 0xffff)); + tmp = (value & 0xffff); + if((unsigned long)location16 >= L1_CODE_START) { + dma_memcpy(location16, &tmp, 2); + } else + *location16 = tmp; + break; + case R_huimm16: + pr_debug("before %x after %x\n", *location16, + ((value >> 16) & 0xffff)); + tmp = ((value >> 16) & 0xffff); + if((unsigned long)location16 >= L1_CODE_START) { + dma_memcpy(location16, &tmp, 2); + } else + *location16 = tmp; + break; + case R_rimm16: + *location16 = (value & 0xffff); + break; + case R_byte4_data: + pr_debug("before %x after %x\n", *location32, value); + *location32 = value; + break; + case R_push: + reloc_stack_push(value); + break; + case R_const: + reloc_stack_push(rel[i].r_addend); + break; + case R_add: + case R_sub: + case R_mult: + case R_div: + case R_mod: + case R_lshift: + case R_rshift: + case R_and: + case R_or: + case R_xor: + case R_land: + case R_lor: + case R_neg: + case R_comp: + reloc_stack_operate(ELF32_R_TYPE(rel[i].r_info), mod); + break; + default: + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + mod->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + return 0; +} + +int +module_finalize(const Elf_Ehdr * hdr, + const Elf_Shdr * sechdrs, struct module *mod) +{ + unsigned int i, strindex = 0, symindex = 0; + char *secstrings; + + secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (i = 1; i < hdr->e_shnum; i++) { + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + } + } + + for (i = 1; i < hdr->e_shnum; i++) { + const char *strtab = (char *)sechdrs[strindex].sh_addr; + unsigned int info = sechdrs[i].sh_info; + + /* Not a valid relocation section? */ + if (info >= hdr->e_shnum) + continue; + + if ((sechdrs[i].sh_type == SHT_RELA) && + ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0)|| + ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) && + (hdr->e_flags & FLG_CODE_IN_L1)))) { + apply_relocate_add((Elf_Shdr *) sechdrs, strtab, + symindex, i, mod); + } + } + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ + if ((mod->arch.text_l1) && (mod->arch.text_l1->sh_addr)) + l1_inst_sram_free((void*)mod->arch.text_l1->sh_addr); + if ((mod->arch.data_a_l1) && (mod->arch.data_a_l1->sh_addr)) + l1_data_sram_free((void*)mod->arch.data_a_l1->sh_addr); + if ((mod->arch.bss_a_l1) && (mod->arch.bss_a_l1->sh_addr)) + l1_data_sram_free((void*)mod->arch.bss_a_l1->sh_addr); + if ((mod->arch.data_b_l1) && (mod->arch.data_b_l1->sh_addr)) + l1_data_B_sram_free((void*)mod->arch.data_b_l1->sh_addr); + if ((mod->arch.bss_b_l1) && (mod->arch.bss_b_l1->sh_addr)) + l1_data_B_sram_free((void*)mod->arch.bss_b_l1->sh_addr); +} diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c new file mode 100644 index 0000000000..3eff7439d8 --- /dev/null +++ b/arch/blackfin/kernel/process.c @@ -0,0 +1,394 @@ +/* + * File: arch/blackfin/kernel/process.c + * Based on: + * Author: + * + * Created: + * Description: Blackfin architecture-dependent process handling. + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +#include +#include + +#define LED_ON 0 +#define LED_OFF 1 + +asmlinkage void ret_from_fork(void); + +/* Points to the SDRAM backup memory for the stack that is currently in + * L1 scratchpad memory. + */ +void *current_l1_stack_save; + +/* The number of tasks currently using a L1 stack area. The SRAM is + * allocated/deallocated whenever this changes from/to zero. + */ +int nr_l1stack_tasks; + +/* Start and length of the area in L1 scratchpad memory which we've allocated + * for process stacks. + */ +void *l1_stack_base; +unsigned long l1_stack_len; + +/* + * Powermanagement idle function, if any.. + */ +void (*pm_idle)(void) = NULL; +EXPORT_SYMBOL(pm_idle); + +void (*pm_power_off)(void) = NULL; +EXPORT_SYMBOL(pm_power_off); + +/* + * We are using a different LED from the one used to indicate timer interrupt. + */ +#if defined(CONFIG_BFIN_IDLE_LED) +static inline void leds_switch(int flag) +{ + unsigned short tmp = 0; + + tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT(); + SSYNC(); + + if (flag == LED_ON) + tmp &= ~CONFIG_BFIN_IDLE_LED_PIN; /* light on */ + else + tmp |= CONFIG_BFIN_IDLE_LED_PIN; /* light off */ + + bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp); + SSYNC(); + +} +#else +static inline void leds_switch(int flag) +{ +} +#endif + +/* + * The idle loop on BFIN + */ +#ifdef CONFIG_IDLE_L1 +void default_idle(void)__attribute__((l1_text)); +void cpu_idle(void)__attribute__((l1_text)); +#endif + +void default_idle(void) +{ + while (!need_resched()) { + leds_switch(LED_OFF); + local_irq_disable(); + if (likely(!need_resched())) + idle_with_irq_disabled(); + local_irq_enable(); + leds_switch(LED_ON); + } +} + +void (*idle)(void) = default_idle; + +/* + * The idle thread. There's no useful work to be + * done, so just try to conserve power and have a + * low exit latency (ie sit in a loop waiting for + * somebody to say that they'd like to reschedule) + */ +void cpu_idle(void) +{ + /* endless idle loop with no priority at all */ + while (1) { + idle(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } +} + +void machine_restart(char *__unused) +{ +#if defined(CONFIG_BLKFIN_CACHE) + bfin_write_IMEM_CONTROL(0x01); + SSYNC(); +#endif + bfin_reset(); + /* Dont do anything till the reset occurs */ + while (1) { + SSYNC(); + } +} + +void machine_halt(void) +{ + for (;;) + asm volatile ("idle"); +} + +void machine_power_off(void) +{ + for (;;) + asm volatile ("idle"); +} + +void show_regs(struct pt_regs *regs) +{ + printk(KERN_NOTICE "\n"); + printk(KERN_NOTICE + "PC: %08lu Status: %04lu SysStatus: %04lu RETS: %08lu\n", + regs->pc, regs->astat, regs->seqstat, regs->rets); + printk(KERN_NOTICE + "A0.x: %08lx A0.w: %08lx A1.x: %08lx A1.w: %08lx\n", + regs->a0x, regs->a0w, regs->a1x, regs->a1w); + printk(KERN_NOTICE "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", + regs->p0, regs->p1, regs->p2, regs->p3); + printk(KERN_NOTICE "P4: %08lx P5: %08lx\n", regs->p4, regs->p5); + printk(KERN_NOTICE "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", + regs->r0, regs->r1, regs->r2, regs->r3); + printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", + regs->r4, regs->r5, regs->r6, regs->r7); + + if (!(regs->ipend)) + printk("USP: %08lx\n", rdusp()); +} + +/* Fill in the fpu structure for a core dump. */ + +int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs) +{ + return 1; +} + +/* + * This gets run with P1 containing the + * function to call, and R1 containing + * the "args". Note P0 is clobbered on the way here. + */ +void kernel_thread_helper(void); +__asm__(".section .text\n" + ".align 4\n" + "_kernel_thread_helper:\n\t" + "\tsp += -12;\n\t" + "\tr0 = r1;\n\t" "\tcall (p1);\n\t" "\tcall _do_exit;\n" ".previous"); + +/* + * Create a kernel thread. + */ +pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags) +{ + struct pt_regs regs; + + memset(®s, 0, sizeof(regs)); + + regs.r1 = (unsigned long)arg; + regs.p1 = (unsigned long)fn; + regs.pc = (unsigned long)kernel_thread_helper; + regs.orig_p0 = -1; + /* Set bit 2 to tell ret_from_fork we should be returning to kernel + mode. */ + regs.ipend = 0x8002; + __asm__ __volatile__("%0 = syscfg;":"=da"(regs.syscfg):); + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, + NULL); +} + +void flush_thread(void) +{ +} + +asmlinkage int bfin_vfork(struct pt_regs *regs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, + NULL); +} + +asmlinkage int bfin_clone(struct pt_regs *regs) +{ + unsigned long clone_flags; + unsigned long newsp; + + /* syscall2 puts clone_flags in r0 and usp in r1 */ + clone_flags = regs->r0; + newsp = regs->r1; + if (!newsp) + newsp = rdusp(); + else + newsp -= 12; + return do_fork(clone_flags, newsp, regs, 0, NULL, NULL); +} + +int +copy_thread(int nr, unsigned long clone_flags, + unsigned long usp, unsigned long topstk, + struct task_struct *p, struct pt_regs *regs) +{ + struct pt_regs *childregs; + + childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1; + *childregs = *regs; + childregs->r0 = 0; + + p->thread.usp = usp; + p->thread.ksp = (unsigned long)childregs; + p->thread.pc = (unsigned long)ret_from_fork; + + return 0; +} + +/* + * fill in the user structure for a core dump.. + */ +void dump_thread(struct pt_regs *regs, struct user *dump) +{ + dump->magic = CMAGIC; + dump->start_code = 0; + dump->start_stack = rdusp() & ~(PAGE_SIZE - 1); + dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT; + dump->u_dsize = ((unsigned long)(current->mm->brk + + (PAGE_SIZE - 1))) >> PAGE_SHIFT; + dump->u_dsize -= dump->u_tsize; + dump->u_ssize = 0; + + if (dump->start_stack < TASK_SIZE) + dump->u_ssize = + ((unsigned long)(TASK_SIZE - + dump->start_stack)) >> PAGE_SHIFT; + + dump->u_ar0 = (struct user_regs_struct *)((int)&dump->regs - (int)dump); + + dump->regs.r0 = regs->r0; + dump->regs.r1 = regs->r1; + dump->regs.r2 = regs->r2; + dump->regs.r3 = regs->r3; + dump->regs.r4 = regs->r4; + dump->regs.r5 = regs->r5; + dump->regs.r6 = regs->r6; + dump->regs.r7 = regs->r7; + dump->regs.p0 = regs->p0; + dump->regs.p1 = regs->p1; + dump->regs.p2 = regs->p2; + dump->regs.p3 = regs->p3; + dump->regs.p4 = regs->p4; + dump->regs.p5 = regs->p5; + dump->regs.orig_p0 = regs->orig_p0; + dump->regs.a0w = regs->a0w; + dump->regs.a1w = regs->a1w; + dump->regs.a0x = regs->a0x; + dump->regs.a1x = regs->a1x; + dump->regs.rets = regs->rets; + dump->regs.astat = regs->astat; + dump->regs.pc = regs->pc; +} + +/* + * sys_execve() executes a new program. + */ + +asmlinkage int sys_execve(char *name, char **argv, char **envp) +{ + int error; + char *filename; + struct pt_regs *regs = (struct pt_regs *)((&name) + 6); + + lock_kernel(); + filename = getname(name); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + error = do_execve(filename, argv, envp, regs); + putname(filename); + out: + unlock_kernel(); + return error; +} + +unsigned long get_wchan(struct task_struct *p) +{ + unsigned long fp, pc; + unsigned long stack_page; + int count = 0; + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + + stack_page = (unsigned long)p; + fp = p->thread.usp; + do { + if (fp < stack_page + sizeof(struct thread_info) || + fp >= 8184 + stack_page) + return 0; + pc = ((unsigned long *)fp)[1]; + if (!in_sched_functions(pc)) + return pc; + fp = *(unsigned long *)fp; + } + while (count++ < 16); + return 0; +} + +#if defined(CONFIG_ACCESS_CHECK) +int _access_ok(unsigned long addr, unsigned long size) +{ + + if (addr > (addr + size)) + return 0; + if (segment_eq(get_fs(),KERNEL_DS)) + return 1; +#ifdef CONFIG_MTD_UCLINUX + if (addr >= memory_start && (addr + size) <= memory_end) + return 1; + if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end) + return 1; +#else + if (addr >= memory_start && (addr + size) <= physical_mem_end) + return 1; +#endif + if (addr >= (unsigned long)__init_begin && + addr + size <= (unsigned long)__init_end) + return 1; + if (addr >= L1_SCRATCH_START + && addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH) + return 1; +#if L1_CODE_LENGTH != 0 + if (addr >= L1_CODE_START + (_etext_l1 - _stext_l1) + && addr + size <= L1_CODE_START + L1_CODE_LENGTH) + return 1; +#endif +#if L1_DATA_A_LENGTH != 0 + if (addr >= L1_DATA_A_START + (_ebss_l1 - _sdata_l1) + && addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH) + return 1; +#endif +#if L1_DATA_B_LENGTH != 0 + if (addr >= L1_DATA_B_START + && addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH) + return 1; +#endif + return 0; +} +EXPORT_SYMBOL(_access_ok); +#endif /* CONFIG_ACCESS_CHECK */ diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c new file mode 100644 index 0000000000..d7c8e514cb --- /dev/null +++ b/arch/blackfin/kernel/ptrace.c @@ -0,0 +1,430 @@ +/* + * File: arch/blackfin/kernel/ptrace.c + * Based on: Taken from linux/kernel/ptrace.c + * Author: linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds + * + * Created: 1/23/92 + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define MAX_SHARED_LIBS 3 +#define TEXT_OFFSET 0 +/* + * does not yet catch signals sent when the child dies. + * in exit.c or in signal.c. + */ + +/* determines which bits in the SYSCFG reg the user has access to. */ +/* 1 = access 0 = no access */ +#define SYSCFG_MASK 0x0007 /* SYSCFG reg */ +/* sets the trace bits. */ +#define TRACE_BITS 0x0001 + +/* Find the stack offset for a register, relative to thread.esp0. */ +#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg) + +/* + * Get the address of the live pt_regs for the specified task. + * These are saved onto the top kernel stack when the process + * is not running. + * + * Note: if a user thread is execve'd from kernel space, the + * kernel stack will not be empty on entry to the kernel, so + * ptracing these tasks will fail. + */ +static inline struct pt_regs *get_user_regs(struct task_struct *task) +{ + return (struct pt_regs *) + ((unsigned long)task->thread_info + + (THREAD_SIZE - sizeof(struct pt_regs))); +} + +/* + * Get all user integer registers. + */ +static inline int ptrace_getregs(struct task_struct *tsk, void __user * uregs) +{ + struct pt_regs *regs = get_user_regs(tsk); + return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0; +} + +/* Mapping from PT_xxx to the stack offset at which the register is + * saved. Notice that usp has no stack-slot and needs to be treated + * specially (see get_reg/put_reg below). + */ + +/* + * Get contents of register REGNO in task TASK. + */ +static inline long get_reg(struct task_struct *task, int regno) +{ + unsigned char *reg_ptr; + + struct pt_regs *regs = + (struct pt_regs *)((unsigned long)task->thread_info + + (THREAD_SIZE - sizeof(struct pt_regs))); + reg_ptr = (char *)regs; + + switch (regno) { + case PT_USP: + return task->thread.usp; + default: + if (regno <= 216) + return *(long *)(reg_ptr + regno); + } + /* slight mystery ... never seems to come here but kernel misbehaves without this code! */ + + printk(KERN_WARNING "Request to get for unknown register %d\n", regno); + return 0; +} + +/* + * Write contents of register REGNO in task TASK. + */ +static inline int +put_reg(struct task_struct *task, int regno, unsigned long data) +{ + char * reg_ptr; + + struct pt_regs *regs = + (struct pt_regs *)((unsigned long)task->thread_info + + (THREAD_SIZE - sizeof(struct pt_regs))); + reg_ptr = (char *)regs; + + switch (regno) { + case PT_PC: + /*********************************************************************/ + /* At this point the kernel is most likely in exception. */ + /* The RETX register will be used to populate the pc of the process. */ + /*********************************************************************/ + regs->retx = data; + regs->pc = data; + break; + case PT_RETX: + break; /* regs->retx = data; break; */ + case PT_USP: + regs->usp = data; + task->thread.usp = data; + break; + default: + if (regno <= 216) + *(long *)(reg_ptr + regno) = data; + } + return 0; +} + +/* + * check that an address falls within the bounds of the target process's memory mappings + */ +static inline int is_user_addr_valid(struct task_struct *child, + unsigned long start, unsigned long len) +{ + struct vm_list_struct *vml; + struct sram_list_struct *sraml; + + for (vml = child->mm->context.vmlist; vml; vml = vml->next) + if (start >= vml->vma->vm_start && start + len <= vml->vma->vm_end) + return 0; + + for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next) + if (start >= (unsigned long)sraml->addr + && start + len <= (unsigned long)sraml->addr + sraml->length) + return 0; + + return -EIO; +} + +/* + * Called by kernel/ptrace.c when detaching.. + * + * Make sure the single step bit is not set. + */ +void ptrace_disable(struct task_struct *child) +{ + unsigned long tmp; + /* make sure the single step bit is not set. */ + tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16); + put_reg(child, PT_SR, tmp); +} + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) +{ + int ret; + int add = 0; + + switch (request) { + /* when I and D space are separate, these will need to be fixed. */ + case PTRACE_PEEKDATA: + pr_debug("ptrace: PEEKDATA\n"); + add = MAX_SHARED_LIBS * 4; /* space between text and data */ + /* fall through */ + case PTRACE_PEEKTEXT: /* read word at location addr. */ + { + unsigned long tmp = 0; + int copied; + + ret = -EIO; + pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + add %d %ld\n", addr, add, + sizeof(data)); + if (is_user_addr_valid(child, addr + add, sizeof(tmp)) < 0) + break; + pr_debug("ptrace: user address is valid\n"); + +#if L1_CODE_LENGTH != 0 + if (addr + add >= L1_CODE_START + && addr + add + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) { + safe_dma_memcpy (&tmp, (const void *)(addr + add), sizeof(tmp)); + copied = sizeof(tmp); + } else +#endif + copied = + access_process_vm(child, addr + add, &tmp, + sizeof(tmp), 0); + pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp); + if (copied != sizeof(tmp)) + break; + ret = put_user(tmp, (unsigned long *)data); + break; + } + + /* read the word at location addr in the USER area. */ + case PTRACE_PEEKUSR: + { + unsigned long tmp; + ret = -EIO; + tmp = 0; + if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) { + printk(KERN_WARNING "ptrace error : PEEKUSR : temporarily returning " + "0 - %x sizeof(pt_regs) is %lx\n", + (int)addr, sizeof(struct pt_regs)); + break; + } + if (addr == sizeof(struct pt_regs)) { + /* PT_TEXT_ADDR */ + tmp = child->mm->start_code + TEXT_OFFSET; + } else if (addr == (sizeof(struct pt_regs) + 4)) { + /* PT_TEXT_END_ADDR */ + tmp = child->mm->end_code; + } else if (addr == (sizeof(struct pt_regs) + 8)) { + /* PT_DATA_ADDR */ + tmp = child->mm->start_data; +#ifdef CONFIG_BINFMT_ELF_FDPIC + } else if (addr == (sizeof(struct pt_regs) + 12)) { + tmp = child->mm->context.exec_fdpic_loadmap; + } else if (addr == (sizeof(struct pt_regs) + 16)) { + tmp = child->mm->context.interp_fdpic_loadmap; +#endif + } else { + tmp = get_reg(child, addr); + } + ret = put_user(tmp, (unsigned long *)data); + break; + } + + /* when I and D space are separate, this will have to be fixed. */ + case PTRACE_POKEDATA: + printk(KERN_NOTICE "ptrace: PTRACE_PEEKDATA\n"); + /* fall through */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + { + int copied; + + ret = -EIO; + pr_debug("ptrace: POKETEXT at addr 0x%08lx + add %d %ld bytes %lx\n", + addr, add, sizeof(data), data); + if (is_user_addr_valid(child, addr + add, sizeof(data)) < 0) + break; + pr_debug("ptrace: user address is valid\n"); + +#if L1_CODE_LENGTH != 0 + if (addr + add >= L1_CODE_START + && addr + add + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) { + safe_dma_memcpy ((void *)(addr + add), &data, sizeof(data)); + copied = sizeof(data); + } else +#endif + copied = + access_process_vm(child, addr + add, &data, + sizeof(data), 1); + pr_debug("ptrace: copied size %d\n", copied); + if (copied != sizeof(data)) + break; + ret = 0; + break; + } + + case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ + ret = -EIO; + if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) { + printk(KERN_WARNING "ptrace error : POKEUSR: temporarily returning 0\n"); + break; + } + + if (addr >= (sizeof(struct pt_regs))) { + ret = 0; + break; + } + if (addr == PT_SYSCFG) { + data &= SYSCFG_MASK; + data |= get_reg(child, PT_SYSCFG); + } + ret = put_reg(child, addr, data); + break; + + case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ + case PTRACE_CONT: + { /* restart after signal. */ + long tmp; + + pr_debug("ptrace_cont\n"); + + ret = -EIO; + if (!valid_signal(data)) + break; + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + + child->exit_code = data; + /* make sure the single step bit is not set. */ + tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS); + put_reg(child, PT_SYSCFG, tmp); + pr_debug("before wake_up_process\n"); + wake_up_process(child); + ret = 0; + break; + } + + /* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: + { + long tmp; + ret = 0; + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ + break; + child->exit_code = SIGKILL; + /* make sure the single step bit is not set. */ + tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS); + put_reg(child, PT_SYSCFG, tmp); + wake_up_process(child); + break; + } + + case PTRACE_SINGLESTEP: + { /* set the trap flag. */ + long tmp; + + pr_debug("single step\n"); + ret = -EIO; + if (!valid_signal(data)) + break; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + + tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS); + put_reg(child, PT_SYSCFG, tmp); + + child->exit_code = data; + /* give it a chance to run. */ + wake_up_process(child); + ret = 0; + break; + } + + case PTRACE_DETACH: + { /* detach a process that was attached. */ + ret = ptrace_detach(child, data); + break; + } + + case PTRACE_GETREGS: + { + + /* Get all gp regs from the child. */ + ret = ptrace_getregs(child, (void __user *)data); + break; + } + + case PTRACE_SETREGS: + { + printk(KERN_NOTICE + "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n"); + /* Set all gp regs in the child. */ + ret = 0; + break; + } + default: + ret = ptrace_request(child, request, addr, data); + break; + } + + return ret; +} + +asmlinkage void syscall_trace(void) +{ + + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + + if (!(current->ptrace & PT_PTRACED)) + return; + + /* the 0x80 provides a way for the tracing parent to distinguish + * between a syscall stop and SIGTRAP delivery + */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c new file mode 100644 index 0000000000..342bb8dd56 --- /dev/null +++ b/arch/blackfin/kernel/setup.c @@ -0,0 +1,902 @@ +/* + * File: arch/blackfin/kernel/setup.c + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +unsigned long memory_start, memory_end, physical_mem_end; +unsigned long reserved_mem_dcache_on; +unsigned long reserved_mem_icache_on; +EXPORT_SYMBOL(memory_start); +EXPORT_SYMBOL(memory_end); +EXPORT_SYMBOL(physical_mem_end); +EXPORT_SYMBOL(_ramend); + +#ifdef CONFIG_MTD_UCLINUX +unsigned long memory_mtd_end, memory_mtd_start, mtd_size; +unsigned long _ebss; +EXPORT_SYMBOL(memory_mtd_end); +EXPORT_SYMBOL(memory_mtd_start); +EXPORT_SYMBOL(mtd_size); +#endif + +char command_line[COMMAND_LINE_SIZE]; + +#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) +static void generate_cpl_tables(void); +#endif + +void __init bf53x_cache_init(void) +{ +#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) + generate_cpl_tables(); +#endif + +#ifdef CONFIG_BLKFIN_CACHE + bfin_icache_init(); + printk(KERN_INFO "Instruction Cache Enabled\n"); +#endif + +#ifdef CONFIG_BLKFIN_DCACHE + bfin_dcache_init(); + printk(KERN_INFO "Data Cache Enabled" +# if defined CONFIG_BLKFIN_WB + " (write-back)" +# elif defined CONFIG_BLKFIN_WT + " (write-through)" +# endif + "\n"); +#endif +} + +void bf53x_relocate_l1_mem(void) +{ + unsigned long l1_code_length; + unsigned long l1_data_a_length; + unsigned long l1_data_b_length; + + l1_code_length = _etext_l1 - _stext_l1; + if (l1_code_length > L1_CODE_LENGTH) + l1_code_length = L1_CODE_LENGTH; + /* cannot complain as printk is not available as yet. + * But we can continue booting and complain later! + */ + + /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ + dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); + + l1_data_a_length = _ebss_l1 - _sdata_l1; + if (l1_data_a_length > L1_DATA_A_LENGTH) + l1_data_a_length = L1_DATA_A_LENGTH; + + /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */ + dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); + + l1_data_b_length = _ebss_b_l1 - _sdata_b_l1; + if (l1_data_b_length > L1_DATA_B_LENGTH) + l1_data_b_length = L1_DATA_B_LENGTH; + + /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */ + dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + + l1_data_a_length, l1_data_b_length); + +} + +/* + * Initial parsing of the command line. Currently, we support: + * - Controlling the linux memory size: mem=xxx[KMG] + * - Controlling the physical memory size: max_mem=xxx[KMG][$][#] + * $ -> reserved memory is dcacheable + * # -> reserved memory is icacheable + */ +static __init void parse_cmdline_early(char *cmdline_p) +{ + char c = ' ', *to = cmdline_p; + unsigned int memsize; + for (;;) { + if (c == ' ') { + + if (!memcmp(to, "mem=", 4)) { + to += 4; + memsize = memparse(to, &to); + if (memsize) + _ramend = memsize; + + } else if (!memcmp(to, "max_mem=", 8)) { + to += 8; + memsize = memparse(to, &to); + if (memsize) { + physical_mem_end = memsize; + if (*to != ' ') { + if (*to == '$' + || *(to + 1) == '$') + reserved_mem_dcache_on = + 1; + if (*to == '#' + || *(to + 1) == '#') + reserved_mem_icache_on = + 1; + } + } + } + + } + c = *(to++); + if (!c) + break; + } +} + +void __init setup_arch(char **cmdline_p) +{ + int bootmap_size; + unsigned long l1_length, sclk, cclk; +#ifdef CONFIG_MTD_UCLINUX + unsigned long mtd_phys = 0; +#endif + + cclk = get_cclk(); + sclk = get_sclk(); + +#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273) + if (cclk == sclk) + panic("ANOMALY 05000273, SCLK can not be same as CCLK"); +#endif + +#if defined(ANOMALY_05000266) + bfin_read_IMDMA_D0_IRQ_STATUS(); + bfin_read_IMDMA_D1_IRQ_STATUS(); +#endif + +#ifdef DEBUG_SERIAL_EARLY_INIT + bfin_console_init(); /* early console registration */ + /* this give a chance to get printk() working before crash. */ +#endif + +#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) + /* we need to initialize the Flashrom device here since we might + * do things with flash early on in the boot + */ + flash_probe(); +#endif + +#if defined(CONFIG_CMDLINE_BOOL) + memset(command_line, 0, sizeof(command_line)); + strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line)); + command_line[sizeof(command_line) - 1] = 0; +#endif + + /* Keep a copy of command line */ + *cmdline_p = &command_line[0]; + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE - 1] = 0; + + /* setup memory defaults from the user config */ + physical_mem_end = 0; + _ramend = CONFIG_MEM_SIZE * 1024 * 1024; + + parse_cmdline_early(&command_line[0]); + + if (physical_mem_end == 0) + physical_mem_end = _ramend; + + /* by now the stack is part of the init task */ + memory_end = _ramend - DMA_UNCACHED_REGION; + + _ramstart = (unsigned long)__bss_stop; + memory_start = PAGE_ALIGN(_ramstart); + +#if defined(CONFIG_MTD_UCLINUX) + /* generic memory mapped MTD driver */ + memory_mtd_end = memory_end; + + mtd_phys = _ramstart; + mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8))); + +# if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS) + if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC) + mtd_size = + PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10); +# endif + +# if defined(CONFIG_CRAMFS) + if (*((unsigned long *)(mtd_phys)) == CRAMFS_MAGIC) + mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x4))); +# endif + +# if defined(CONFIG_ROMFS_FS) + if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0 + && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) + mtd_size = + PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2])); +# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) + /* Due to a Hardware Anomaly we need to limit the size of usable + * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on + * 05000263 - Hardware loop corrupted when taking an ICPLB exception + */ +# if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO)) + if (memory_end >= 56 * 1024 * 1024) + memory_end = 56 * 1024 * 1024; +# else + if (memory_end >= 60 * 1024 * 1024) + memory_end = 60 * 1024 * 1024; +# endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */ +# endif /* ANOMALY_05000263 */ +# endif /* CONFIG_ROMFS_FS */ + + memory_end -= mtd_size; + + if (mtd_size == 0) { + console_init(); + panic("Don't boot kernel without rootfs attached.\n"); + } + + /* Relocate MTD image to the top of memory after the uncached memory area */ + dma_memcpy((char *)memory_end, __bss_stop, mtd_size); + + memory_mtd_start = memory_end; + _ebss = memory_mtd_start; /* define _ebss for compatible */ +#endif /* CONFIG_MTD_UCLINUX */ + +#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) + /* Due to a Hardware Anomaly we need to limit the size of usable + * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on + * 05000263 - Hardware loop corrupted when taking an ICPLB exception + */ +#if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO)) + if (memory_end >= 56 * 1024 * 1024) + memory_end = 56 * 1024 * 1024; +#else + if (memory_end >= 60 * 1024 * 1024) + memory_end = 60 * 1024 * 1024; +#endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */ + printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20); +#endif /* ANOMALY_05000263 */ + +#if !defined(CONFIG_MTD_UCLINUX) + memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/ +#endif + init_mm.start_code = (unsigned long)_stext; + init_mm.end_code = (unsigned long)_etext; + init_mm.end_data = (unsigned long)_edata; + init_mm.brk = (unsigned long)0; + + init_leds(); + + printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n"); + printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid()); + if (bfin_revid() != bfin_compiled_revid()) + printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", + bfin_compiled_revid(), bfin_revid()); + if (bfin_revid() < SUPPORTED_REVID) + printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n", + CPU, bfin_revid()); + printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); + + printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n", + cclk / 1000000, sclk / 1000000); + +#if defined(ANOMALY_05000273) + if ((cclk >> 1) <= sclk) + printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n"); +#endif + + printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20); + printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); + + printk(KERN_INFO "Memory map:\n" + KERN_INFO " text = 0x%p-0x%p\n" + KERN_INFO " init = 0x%p-0x%p\n" + KERN_INFO " data = 0x%p-0x%p\n" + KERN_INFO " stack = 0x%p-0x%p\n" + KERN_INFO " bss = 0x%p-0x%p\n" + KERN_INFO " available = 0x%p-0x%p\n" +#ifdef CONFIG_MTD_UCLINUX + KERN_INFO " rootfs = 0x%p-0x%p\n" +#endif +#if DMA_UNCACHED_REGION > 0 + KERN_INFO " DMA Zone = 0x%p-0x%p\n" +#endif + , _stext, _etext, + __init_begin, __init_end, + _sdata, _edata, + (void*)&init_thread_union, (void*)((int)(&init_thread_union) + 0x2000), + __bss_start, __bss_stop, + (void*)_ramstart, (void*)memory_end +#ifdef CONFIG_MTD_UCLINUX + , (void*)memory_mtd_start, (void*)(memory_mtd_start + mtd_size) +#endif +#if DMA_UNCACHED_REGION > 0 + , (void*)(_ramend - DMA_UNCACHED_REGION), (void*)(_ramend) +#endif + ); + + /* + * give all the memory to the bootmap allocator, tell it to put the + * boot mem_map at the start of memory + */ + bootmap_size = init_bootmem_node(NODE_DATA(0), memory_start >> PAGE_SHIFT, /* map goes here */ + PAGE_OFFSET >> PAGE_SHIFT, + memory_end >> PAGE_SHIFT); + /* + * free the usable memory, we have to make sure we do not free + * the bootmem bitmap so we then reserve it after freeing it :-) + */ + free_bootmem(memory_start, memory_end - memory_start); + + reserve_bootmem(memory_start, bootmap_size); + /* + * get kmalloc into gear + */ + paging_init(); + + /* check the size of the l1 area */ + l1_length = _etext_l1 - _stext_l1; + if (l1_length > L1_CODE_LENGTH) + panic("L1 memory overflow\n"); + + l1_length = _ebss_l1 - _sdata_l1; + if (l1_length > L1_DATA_A_LENGTH) + panic("L1 memory overflow\n"); + + bf53x_cache_init(); + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +# if defined(CONFIG_BFIN_SHARED_FLASH_ENET) && defined(CONFIG_BFIN533_STAMP) + /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN)); + bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN); + SSYNC(); +# endif +# if defined (CONFIG_BFIN561_EZKIT) + bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12)); + SSYNC(); +# endif /* defined (CONFIG_BFIN561_EZKIT) */ +#endif + + printk(KERN_INFO "Hardware Trace Enabled\n"); + bfin_write_TBUFCTL(0x03); +} + +#if defined(CONFIG_BF561) +static struct cpu cpu[2]; +#else +static struct cpu cpu[1]; +#endif +static int __init topology_init(void) +{ +#if defined (CONFIG_BF561) + register_cpu(&cpu[0], 0); + register_cpu(&cpu[1], 1); + return 0; +#else + return register_cpu(cpu, 0); +#endif +} + +subsys_initcall(topology_init); + +#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) +u16 lock_kernel_check(u32 start, u32 end) +{ + if ((start <= (u32) _stext && end >= (u32) _end) + || (start >= (u32) _stext && end <= (u32) _end)) + return IN_KERNEL; + return 0; +} + +static unsigned short __init +fill_cplbtab(struct cplb_tab *table, + unsigned long start, unsigned long end, + unsigned long block_size, unsigned long cplb_data) +{ + int i; + + switch (block_size) { + case SIZE_4M: + i = 3; + break; + case SIZE_1M: + i = 2; + break; + case SIZE_4K: + i = 1; + break; + case SIZE_1K: + default: + i = 0; + break; + } + + cplb_data = (cplb_data & ~(3 << 16)) | (i << 16); + + while ((start < end) && (table->pos < table->size)) { + + table->tab[table->pos++] = start; + + if (lock_kernel_check(start, start + block_size) == IN_KERNEL) + table->tab[table->pos++] = + cplb_data | CPLB_LOCK | CPLB_DIRTY; + else + table->tab[table->pos++] = cplb_data; + + start += block_size; + } + return 0; +} + +static unsigned short __init +close_cplbtab(struct cplb_tab *table) +{ + + while (table->pos < table->size) { + + table->tab[table->pos++] = 0; + table->tab[table->pos++] = 0; /* !CPLB_VALID */ + } + return 0; +} + +static void __init generate_cpl_tables(void) +{ + + u16 i, j, process; + u32 a_start, a_end, as, ae, as_1m; + + struct cplb_tab *t_i = NULL; + struct cplb_tab *t_d = NULL; + struct s_cplb cplb; + + cplb.init_i.size = MAX_CPLBS; + cplb.init_d.size = MAX_CPLBS; + cplb.switch_i.size = MAX_SWITCH_I_CPLBS; + cplb.switch_d.size = MAX_SWITCH_D_CPLBS; + + cplb.init_i.pos = 0; + cplb.init_d.pos = 0; + cplb.switch_i.pos = 0; + cplb.switch_d.pos = 0; + + cplb.init_i.tab = icplb_table; + cplb.init_d.tab = dcplb_table; + cplb.switch_i.tab = ipdt_table; + cplb.switch_d.tab = dpdt_table; + + cplb_data[SDRAM_KERN].end = memory_end; + +#ifdef CONFIG_MTD_UCLINUX + cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start; + cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size; + cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0; +# if defined(CONFIG_ROMFS_FS) + cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB; + + /* + * The ROMFS_FS size is often not multiple of 1MB. + * This can cause multiple CPLB sets covering the same memory area. + * This will then cause multiple CPLB hit exceptions. + * Workaround: We ensure a contiguous memory area by extending the kernel + * memory section over the mtd section. + * For ROMFS_FS memory must be covered with ICPLBs anyways. + * So there is no difference between kernel and mtd memory setup. + */ + + cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;; + cplb_data[SDRAM_RAM_MTD].valid = 0; + +# endif +#else + cplb_data[SDRAM_RAM_MTD].valid = 0; +#endif + + cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION; + cplb_data[SDRAM_DMAZ].end = _ramend; + + cplb_data[RES_MEM].start = _ramend; + cplb_data[RES_MEM].end = physical_mem_end; + + if (reserved_mem_dcache_on) + cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC; + else + cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL; + + if (reserved_mem_icache_on) + cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC; + else + cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; + + for (i = ZERO_P; i <= L2_MEM; i++) { + + if (cplb_data[i].valid) { + + as_1m = cplb_data[i].start % SIZE_1M; + + /* We need to make sure all sections are properly 1M aligned + * However between Kernel Memory and the Kernel mtd section, depending on the + * rootfs size, there can be overlapping memory areas. + */ + + if (as_1m && i!=L1I_MEM && i!=L1D_MEM) { +#ifdef CONFIG_MTD_UCLINUX + if (i == SDRAM_RAM_MTD) { + if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start) + cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M; + else + cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)); + } else +#endif + printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n", + cplb_data[i].name, cplb_data[i].start); + } + + as = cplb_data[i].start % SIZE_4M; + ae = cplb_data[i].end % SIZE_4M; + + if (as) + a_start = cplb_data[i].start + (SIZE_4M - (as)); + else + a_start = cplb_data[i].start; + + a_end = cplb_data[i].end - ae; + + for (j = INITIAL_T; j <= SWITCH_T; j++) { + + switch (j) { + case INITIAL_T: + if (cplb_data[i].attr & INITIAL_T) { + t_i = &cplb.init_i; + t_d = &cplb.init_d; + process = 1; + } else + process = 0; + break; + case SWITCH_T: + if (cplb_data[i].attr & SWITCH_T) { + t_i = &cplb.switch_i; + t_d = &cplb.switch_d; + process = 1; + } else + process = 0; + break; + default: + process = 0; + break; + } + + if (process) { + if (cplb_data[i].attr & I_CPLB) { + + if (cplb_data[i].psize) { + fill_cplbtab(t_i, + cplb_data[i].start, + cplb_data[i].end, + cplb_data[i].psize, + cplb_data[i].i_conf); + } else { + /*icplb_table */ +#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263)) + if (i == SDRAM_KERN) { + fill_cplbtab(t_i, + cplb_data[i].start, + cplb_data[i].end, + SIZE_4M, + cplb_data[i].i_conf); + } else +#endif + { + fill_cplbtab(t_i, + cplb_data[i].start, + a_start, + SIZE_1M, + cplb_data[i].i_conf); + fill_cplbtab(t_i, + a_start, + a_end, + SIZE_4M, + cplb_data[i].i_conf); + fill_cplbtab(t_i, a_end, + cplb_data[i].end, + SIZE_1M, + cplb_data[i].i_conf); + } + } + + } + if (cplb_data[i].attr & D_CPLB) { + + if (cplb_data[i].psize) { + fill_cplbtab(t_d, + cplb_data[i].start, + cplb_data[i].end, + cplb_data[i].psize, + cplb_data[i].d_conf); + } else { +/*dcplb_table*/ + fill_cplbtab(t_d, + cplb_data[i].start, + a_start, SIZE_1M, + cplb_data[i].d_conf); + fill_cplbtab(t_d, a_start, + a_end, SIZE_4M, + cplb_data[i].d_conf); + fill_cplbtab(t_d, a_end, + cplb_data[i].end, + SIZE_1M, + cplb_data[i].d_conf); + + } + + } + } + } + + } + } + +/* close tables */ + + close_cplbtab(&cplb.init_i); + close_cplbtab(&cplb.init_d); + + cplb.init_i.tab[cplb.init_i.pos] = -1; + cplb.init_d.tab[cplb.init_d.pos] = -1; + cplb.switch_i.tab[cplb.switch_i.pos] = -1; + cplb.switch_d.tab[cplb.switch_d.pos] = -1; + +} + +#endif + +static inline u_long get_vco(void) +{ + u_long msel; + u_long vco; + + msel = (bfin_read_PLL_CTL() >> 9) & 0x3F; + if (0 == msel) + msel = 64; + + vco = CONFIG_CLKIN_HZ; + vco >>= (1 & bfin_read_PLL_CTL()); /* DF bit */ + vco = msel * vco; + return vco; +} + +/*Get the Core clock*/ +u_long get_cclk(void) +{ + u_long csel, ssel; + if (bfin_read_PLL_STAT() & 0x1) + return CONFIG_CLKIN_HZ; + + ssel = bfin_read_PLL_DIV(); + csel = ((ssel >> 4) & 0x03); + ssel &= 0xf; + if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */ + return get_vco() / ssel; + return get_vco() >> csel; +} + +EXPORT_SYMBOL(get_cclk); + +/* Get the System clock */ +u_long get_sclk(void) +{ + u_long ssel; + + if (bfin_read_PLL_STAT() & 0x1) + return CONFIG_CLKIN_HZ; + + ssel = (bfin_read_PLL_DIV() & 0xf); + if (0 == ssel) { + printk(KERN_WARNING "Invalid System Clock\n"); + ssel = 1; + } + + return get_vco() / ssel; +} + +EXPORT_SYMBOL(get_sclk); + +/* + * Get CPU information for use by the procfs. + */ +static int show_cpuinfo(struct seq_file *m, void *v) +{ + char *cpu, *mmu, *fpu, *name; + uint32_t revid; + + u_long cclk = 0, sclk = 0; + u_int dcache_size = 0, dsup_banks = 0; + + cpu = CPU; + mmu = "none"; + fpu = "none"; + revid = bfin_revid(); + name = bfin_board_name; + + cclk = get_cclk(); + sclk = get_sclk(); + + seq_printf(m, "CPU:\t\tADSP-%s Rev. 0.%d\n" + "MMU:\t\t%s\n" + "FPU:\t\t%s\n" + "Core Clock:\t%9lu Hz\n" + "System Clock:\t%9lu Hz\n" + "BogoMips:\t%lu.%02lu\n" + "Calibration:\t%lu loops\n", + cpu, revid, mmu, fpu, + cclk, + sclk, + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100, + (loops_per_jiffy * HZ)); + seq_printf(m, "Board Name:\t%s\n", name); + seq_printf(m, "Board Memory:\t%ld MB\n", physical_mem_end >> 20); + seq_printf(m, "Kernel Memory:\t%ld MB\n", (unsigned long)_ramend >> 20); + if (bfin_read_IMEM_CONTROL() & (ENICPLB | IMC)) + seq_printf(m, "I-CACHE:\tON\n"); + else + seq_printf(m, "I-CACHE:\tOFF\n"); + if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)) + seq_printf(m, "D-CACHE:\tON" +#if defined CONFIG_BLKFIN_WB + " (write-back)" +#elif defined CONFIG_BLKFIN_WT + " (write-through)" +#endif + "\n"); + else + seq_printf(m, "D-CACHE:\tOFF\n"); + + + switch(bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) { + case ACACHE_BSRAM: + seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n"); + dcache_size = 16; + dsup_banks = 1; + break; + case ACACHE_BCACHE: + seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n"); + dcache_size = 32; + dsup_banks = 2; + break; + case ASRAM_BSRAM: + seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n"); + dcache_size = 0; + dsup_banks = 0; + break; + default: + break; + } + + + seq_printf(m, "I-CACHE Size:\t%dKB\n", BLKFIN_ICACHESIZE / 1024); + seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size); + seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n", + BLKFIN_ISUBBANKS, BLKFIN_IWAYS, BLKFIN_ILINES); + seq_printf(m, + "D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", + dsup_banks, BLKFIN_DSUBBANKS, BLKFIN_DWAYS, + BLKFIN_DLINES); +#ifdef CONFIG_BLKFIN_CACHE_LOCK + switch (read_iloc()) { + case WAY0_L: + seq_printf(m, "Way0 Locked-Down\n"); + break; + case WAY1_L: + seq_printf(m, "Way1 Locked-Down\n"); + break; + case WAY01_L: + seq_printf(m, "Way0,Way1 Locked-Down\n"); + break; + case WAY2_L: + seq_printf(m, "Way2 Locked-Down\n"); + break; + case WAY02_L: + seq_printf(m, "Way0,Way2 Locked-Down\n"); + break; + case WAY12_L: + seq_printf(m, "Way1,Way2 Locked-Down\n"); + break; + case WAY012_L: + seq_printf(m, "Way0,Way1 & Way2 Locked-Down\n"); + break; + case WAY3_L: + seq_printf(m, "Way3 Locked-Down\n"); + break; + case WAY03_L: + seq_printf(m, "Way0,Way3 Locked-Down\n"); + break; + case WAY13_L: + seq_printf(m, "Way1,Way3 Locked-Down\n"); + break; + case WAY013_L: + seq_printf(m, "Way 0,Way1,Way3 Locked-Down\n"); + break; + case WAY32_L: + seq_printf(m, "Way3,Way2 Locked-Down\n"); + break; + case WAY320_L: + seq_printf(m, "Way3,Way2,Way0 Locked-Down\n"); + break; + case WAY321_L: + seq_printf(m, "Way3,Way2,Way1 Locked-Down\n"); + break; + case WAYALL_L: + seq_printf(m, "All Ways are locked\n"); + break; + default: + seq_printf(m, "No Ways are locked\n"); + } +#endif + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < NR_CPUS ? ((void *)0x12345678) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; + +void cmdline_init(unsigned long r0) +{ + if (r0) + strncpy(command_line, (char *)r0, COMMAND_LINE_SIZE); +} diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c new file mode 100644 index 0000000000..316e65c343 --- /dev/null +++ b/arch/blackfin/kernel/signal.c @@ -0,0 +1,356 @@ +/* + * File: arch/blackfin/kernel/signal.c + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +struct fdpic_func_descriptor { + unsigned long text; + unsigned long GOT; +}; + +struct rt_sigframe { + int sig; + struct siginfo *pinfo; + void *puc; + char retcode[8]; + struct siginfo info; + struct ucontext uc; +}; + +asmlinkage int sys_sigaltstack(const stack_t * uss, stack_t * uoss) +{ + return do_sigaltstack(uss, uoss, rdusp()); +} + +static inline int +rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *pr0) +{ + unsigned long usp = 0; + int err = 0; + +#define RESTORE(x) err |= __get_user(regs->x, &sc->sc_##x) + + /* restore passed registers */ + RESTORE(r0); RESTORE(r1); RESTORE(r2); RESTORE(r3); + RESTORE(r4); RESTORE(r5); RESTORE(r6); RESTORE(r7); + RESTORE(p0); RESTORE(p1); RESTORE(p2); RESTORE(p3); + RESTORE(p4); RESTORE(p5); + err |= __get_user(usp, &sc->sc_usp); + wrusp(usp); + RESTORE(a0w); RESTORE(a1w); + RESTORE(a0x); RESTORE(a1x); + RESTORE(astat); + RESTORE(rets); + RESTORE(pc); + RESTORE(retx); + RESTORE(fp); + RESTORE(i0); RESTORE(i1); RESTORE(i2); RESTORE(i3); + RESTORE(m0); RESTORE(m1); RESTORE(m2); RESTORE(m3); + RESTORE(l0); RESTORE(l1); RESTORE(l2); RESTORE(l3); + RESTORE(b0); RESTORE(b1); RESTORE(b2); RESTORE(b3); + RESTORE(lc0); RESTORE(lc1); + RESTORE(lt0); RESTORE(lt1); + RESTORE(lb0); RESTORE(lb1); + RESTORE(seqstat); + + regs->orig_p0 = -1; /* disable syscall checks */ + + *pr0 = regs->r0; + return err; +} + +asmlinkage int do_rt_sigreturn(unsigned long __unused) +{ + struct pt_regs *regs = (struct pt_regs *)__unused; + unsigned long usp = rdusp(); + struct rt_sigframe *frame = (struct rt_sigframe *)(usp); + sigset_t set; + int r0; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0)) + goto badframe; + + if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->usp) == -EFAULT) + goto badframe; + + return r0; + + badframe: + force_sig(SIGSEGV, current); + return 0; +} + +static inline int rt_setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs) +{ + int err = 0; + +#define SETUP(x) err |= __put_user(regs->x, &sc->sc_##x) + + SETUP(r0); SETUP(r1); SETUP(r2); SETUP(r3); + SETUP(r4); SETUP(r5); SETUP(r6); SETUP(r7); + SETUP(p0); SETUP(p1); SETUP(p2); SETUP(p3); + SETUP(p4); SETUP(p5); + err |= __put_user(rdusp(), &sc->sc_usp); + SETUP(a0w); SETUP(a1w); + SETUP(a0x); SETUP(a1x); + SETUP(astat); + SETUP(rets); + SETUP(pc); + SETUP(retx); + SETUP(fp); + SETUP(i0); SETUP(i1); SETUP(i2); SETUP(i3); + SETUP(m0); SETUP(m1); SETUP(m2); SETUP(m3); + SETUP(l0); SETUP(l1); SETUP(l2); SETUP(l3); + SETUP(b0); SETUP(b1); SETUP(b2); SETUP(b3); + SETUP(lc0); SETUP(lc1); + SETUP(lt0); SETUP(lt1); + SETUP(lb0); SETUP(lb1); + SETUP(seqstat); + + return err; +} + +static inline void push_cache(unsigned long vaddr, unsigned int len) +{ + flush_icache_range(vaddr, vaddr + len); +} + +static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, + size_t frame_size) +{ + unsigned long usp; + + /* Default to using normal stack. */ + usp = rdusp(); + + /* This is the X/Open sanctioned signal stack switching. */ + if (ka->sa.sa_flags & SA_ONSTACK) { + if (!on_sig_stack(usp)) + usp = current->sas_ss_sp + current->sas_ss_size; + } + return (void *)((usp - frame_size) & -8UL); +} + +static int +setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, + sigset_t * set, struct pt_regs *regs) +{ + struct rt_sigframe *frame; + int err = 0; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + + err |= __put_user((current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain-> + signal_invmap[sig] : sig), &frame->sig); + + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= + __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(rdusp()), &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs); + err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Set up to return from userspace. */ + err |= __put_user(0x28, &(frame->retcode[0])); + err |= __put_user(0xe1, &(frame->retcode[1])); + err |= __put_user(0xad, &(frame->retcode[2])); + err |= __put_user(0x00, &(frame->retcode[3])); + err |= __put_user(0xa0, &(frame->retcode[4])); + err |= __put_user(0x00, &(frame->retcode[5])); + + if (err) + goto give_sigsegv; + + push_cache((unsigned long)&frame->retcode, sizeof(frame->retcode)); + + /* Set up registers for signal handler */ + wrusp((unsigned long)frame); + if (get_personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor *) ka->sa.sa_handler; + __get_user(regs->pc, &funcptr->text); + __get_user(regs->p3, &funcptr->GOT); + } else + regs->pc = (unsigned long)ka->sa.sa_handler; + regs->rets = (unsigned long)(frame->retcode); + + regs->r0 = frame->sig; + regs->r1 = (unsigned long)(&frame->info); + regs->r2 = (unsigned long)(&frame->uc); + + return 0; + + give_sigsegv: + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; + force_sig(SIGSEGV, current); + return -EFAULT; +} + +static inline void +handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) +{ + switch (regs->r0) { + case -ERESTARTNOHAND: + if (!has_handler) + goto do_restart; + regs->r0 = -EINTR; + break; + + case -ERESTARTSYS: + if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) { + regs->r0 = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + do_restart: + regs->p0 = regs->orig_p0; + regs->r0 = regs->orig_r0; + regs->pc -= 2; + break; + } +} + +/* + * OK, we're invoking a handler + */ +static int +handle_signal(int sig, siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs *regs) +{ + int ret; + + /* are we from a system call? to see pt_regs->orig_p0 */ + if (regs->orig_p0 >= 0) + /* If so, check system call restarting.. */ + handle_restart(regs, ka, 1); + + /* set up the stack frame */ + ret = setup_rt_frame(sig, ka, info, oldset, regs); + + if (ret == 0) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, + &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked, sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + return ret; +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals + * that the kernel can handle, and then we build all the user-level signal + * handling stack-frames in one go after that. + */ +asmlinkage void do_signal(struct pt_regs *regs) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + sigset_t *oldset; + + current->thread.esp0 = (unsigned long)regs; + + if (try_to_freeze()) + goto no_signal; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + } + + return; + } + +no_signal: + /* Did we come from a system call? */ + if (regs->orig_p0 >= 0) + /* Restart the system call - no handlers present */ + handle_restart(regs, NULL, 0); + + /* if there's no signal to deliver, we just put the saved sigmask + * back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } +} diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c new file mode 100644 index 0000000000..f436e6743f --- /dev/null +++ b/arch/blackfin/kernel/sys_bfin.c @@ -0,0 +1,115 @@ +/* + * File: arch/blackfin/kernel/sys_bfin.c + * Based on: + * Author: + * + * Created: + * Description: This file contains various random system calls that + * have a non-standard calling sequence on the Linux/bfin + * platform. + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * sys_pipe() is the normal C calling standard for creating + * a pipe. It's not the way unix traditionally does this, though. + */ +asmlinkage int sys_pipe(unsigned long *fildes) +{ + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + if (copy_to_user(fildes, fd, 2 * sizeof(int))) + error = -EFAULT; + } + return error; +} + +/* common code for old and new mmaps */ +static inline long +do_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + int error = -EBADF; + struct file *file = NULL; + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + + down_write(¤t->mm->mmap_sem); + error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); + out: + return error; +} + +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + return do_mmap2(addr, len, prot, flags, fd, pgoff); +} + +asmlinkage int sys_getpagesize(void) +{ + return PAGE_SIZE; +} + +asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags) +{ + return sram_alloc_with_lsl(size, flags); +} + +asmlinkage int sys_sram_free(const void *addr) +{ + return sram_free_with_lsl(addr); +} + +asmlinkage void *sys_dma_memcpy(void *dest, const void *src, size_t len) +{ + return safe_dma_memcpy(dest, src, len); +} diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c new file mode 100644 index 0000000000..f578176b6d --- /dev/null +++ b/arch/blackfin/kernel/time.c @@ -0,0 +1,326 @@ +/* + * File: arch/blackfin/kernel/time.c + * Based on: none - original work + * Author: + * + * Created: + * Description: This file contains the bfin-specific time handling details. + * Most of the stuff is located in the machine specific files. + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +#include + +/* This is an NTP setting */ +#define TICK_SIZE (tick_nsec / 1000) + +static void time_sched_init(irqreturn_t(*timer_routine) + (int, void *)); +static unsigned long gettimeoffset(void); +static inline void do_leds(void); + +#if (defined(CONFIG_BFIN_ALIVE_LED) || defined(CONFIG_BFIN_IDLE_LED)) +void __init init_leds(void) +{ + unsigned int tmp = 0; + +#if defined(CONFIG_BFIN_ALIVE_LED) + /* config pins as output. */ + tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_DPORT(); + SSYNC(); + bfin_write_CONFIG_BFIN_ALIVE_LED_DPORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); + SSYNC(); + + /* First set led be off */ + tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT(); + SSYNC(); + bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); /* light off */ + SSYNC(); +#endif + +#if defined(CONFIG_BFIN_IDLE_LED) + /* config pins as output. */ + tmp = bfin_read_CONFIG_BFIN_IDLE_LED_DPORT(); + SSYNC(); + bfin_write_CONFIG_BFIN_IDLE_LED_DPORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); + SSYNC(); + + /* First set led be off */ + tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT(); + SSYNC(); + bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); /* light off */ + SSYNC(); +#endif +} +#else +void __init init_leds(void) +{ +} +#endif + +#if defined(CONFIG_BFIN_ALIVE_LED) +static inline void do_leds(void) +{ + static unsigned int count = 50; + static int flag = 0; + unsigned short tmp = 0; + + if (--count == 0) { + count = 50; + flag = ~flag; + } + tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT(); + SSYNC(); + + if (flag) + tmp &= ~CONFIG_BFIN_ALIVE_LED_PIN; /* light on */ + else + tmp |= CONFIG_BFIN_ALIVE_LED_PIN; /* light off */ + + bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp); + SSYNC(); + +} +#else +static inline void do_leds(void) +{ +} +#endif + +static struct irqaction bfin_timer_irq = { + .name = "BFIN Timer Tick", + .flags = IRQF_DISABLED +}; + +/* + * The way that the Blackfin core timer works is: + * - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE) + * - Every time TSCALE ticks, a 32bit is counted down (TCOUNT) + * + * If you take the fastest clock (1ns, or 1GHz to make the math work easier) + * 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter + * (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need + * to use TSCALE, and program it to zero (which is pass CCLK through). + * If you feel like using it, try to keep HZ * TIMESCALE to some + * value that divides easy (like power of 2). + */ + +#define TIME_SCALE 1 + +static void +time_sched_init(irqreturn_t(*timer_routine) (int, void *)) +{ + u32 tcount; + + /* power up the timer, but don't enable it just yet */ + bfin_write_TCNTL(1); + CSYNC(); + + /* + * the TSCALE prescaler counter. + */ + bfin_write_TSCALE((TIME_SCALE - 1)); + + tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1); + bfin_write_TPERIOD(tcount); + bfin_write_TCOUNT(tcount); + + /* now enable the timer */ + CSYNC(); + + bfin_write_TCNTL(7); + + bfin_timer_irq.handler = (irq_handler_t)timer_routine; + /* call setup_irq instead of request_irq because request_irq calls + * kmalloc which has not been initialized yet + */ + setup_irq(IRQ_CORETMR, &bfin_timer_irq); +} + +/* + * Should return useconds since last timer tick + */ +static unsigned long gettimeoffset(void) +{ + unsigned long offset; + unsigned long clocks_per_jiffy; + + clocks_per_jiffy = bfin_read_TPERIOD(); + offset = + (clocks_per_jiffy - + bfin_read_TCOUNT()) / (((clocks_per_jiffy + 1) * HZ) / + USEC_PER_SEC); + + /* Check if we just wrapped the counters and maybe missed a tick */ + if ((bfin_read_ILAT() & (1 << IRQ_CORETMR)) + && (offset < (100000 / HZ / 2))) + offset += (USEC_PER_SEC / HZ); + + return offset; +} + +static inline int set_rtc_mmss(unsigned long nowtime) +{ + return 0; +} + +/* + * timer_interrupt() needs to keep up the real-time clock, + * as well as call the "do_timer()" routine every clocktick + */ +#ifdef CONFIG_CORE_TIMER_IRQ_L1 +irqreturn_t timer_interrupt(int irq, void *dummy)__attribute__((l1_text)); +#endif + +irqreturn_t timer_interrupt(int irq, void *dummy) +{ + /* last time the cmos clock got updated */ + static long last_rtc_update = 0; + + write_seqlock(&xtime_lock); + + do_timer(1); + do_leds(); + +#ifndef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +#endif + profile_tick(CPU_PROFILING); + + /* + * If we have an externally synchronized Linux clock, then update + * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be + * called as close as possible to 500 ms before the new second starts. + */ + + if (ntp_synced() && + xtime.tv_sec > last_rtc_update + 660 && + (xtime.tv_nsec / NSEC_PER_USEC) >= + 500000 - ((unsigned)TICK_SIZE) / 2 + && (xtime.tv_nsec / NSEC_PER_USEC) <= + 500000 + ((unsigned)TICK_SIZE) / 2) { + if (set_rtc_mmss(xtime.tv_sec) == 0) + last_rtc_update = xtime.tv_sec; + else + /* Do it again in 60s. */ + last_rtc_update = xtime.tv_sec - 600; + } + write_sequnlock(&xtime_lock); + return IRQ_HANDLED; +} + +void __init time_init(void) +{ + time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60; /* 1 Jan 2007 */ + +#ifdef CONFIG_RTC_DRV_BFIN + /* [#2663] hack to filter junk RTC values that would cause + * userspace to have to deal with time values greater than + * 2^31 seconds (which uClibc cannot cope with yet) + */ + if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) { + printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n"); + bfin_write_RTC_STAT(0); + } +#endif + + /* Initialize xtime. From now on, xtime is updated with timer interrupts */ + xtime.tv_sec = secs_since_1970; + xtime.tv_nsec = 0; + + wall_to_monotonic.tv_sec = -xtime.tv_sec; + + time_sched_init(timer_interrupt); +} + +#ifndef CONFIG_GENERIC_TIME +void do_gettimeofday(struct timeval *tv) +{ + unsigned long flags; + unsigned long seq; + unsigned long usec, sec; + + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + usec = gettimeoffset(); + sec = xtime.tv_sec; + usec += (xtime.tv_nsec / NSEC_PER_USEC); + } + while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); + + while (usec >= USEC_PER_SEC) { + usec -= USEC_PER_SEC; + sec++; + } + + tv->tv_sec = sec; + tv->tv_usec = usec; +} +EXPORT_SYMBOL(do_gettimeofday); + +int do_settimeofday(struct timespec *tv) +{ + time_t wtm_sec, sec = tv->tv_sec; + long wtm_nsec, nsec = tv->tv_nsec; + + if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + return -EINVAL; + + write_seqlock_irq(&xtime_lock); + /* + * This is revolting. We need to set the xtime.tv_usec + * correctly. However, the value in this location is + * is value at the last tick. + * Discover what correction gettimeofday + * would have done, and then undo it! + */ + nsec -= (gettimeoffset() * NSEC_PER_USEC); + + wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); + wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); + + set_normalized_timespec(&xtime, sec, nsec); + set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); + + ntp_clear(); + + write_sequnlock_irq(&xtime_lock); + clock_was_set(); + + return 0; +} +EXPORT_SYMBOL(do_settimeofday); +#endif /* !CONFIG_GENERIC_TIME */ + +/* + * Scheduler clock - returns current time in nanosec units. + */ +unsigned long long sched_clock(void) +{ + return (unsigned long long)jiffies *(NSEC_PER_SEC / HZ); +} diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c new file mode 100644 index 0000000000..9556b73de8 --- /dev/null +++ b/arch/blackfin/kernel/traps.c @@ -0,0 +1,649 @@ +/* + * File: arch/blackfin/kernel/traps.c + * Based on: + * Author: Hamish Macdonald + * + * Created: + * Description: uses S/W interrupt 15 for the system calls + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_KGDB +# include +# include +#endif + +/* Initiate the event table handler */ +void __init trap_init(void) +{ + CSYNC(); + bfin_write_EVT3(trap); + CSYNC(); +} + +asmlinkage void trap_c(struct pt_regs *fp); + +int kstack_depth_to_print = 48; + +static int printk_address(unsigned long address) +{ + struct vm_list_struct *vml; + struct task_struct *p; + struct mm_struct *mm; + +#ifdef CONFIG_KALLSYMS + unsigned long offset = 0, symsize; + const char *symname; + char *modname; + char *delim = ":"; + char namebuf[128]; + + /* look up the address and see if we are in kernel space */ + symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf); + + if (symname) { + /* yeah! kernel space! */ + if (!modname) + modname = delim = ""; + return printk("<0x%p> { %s%s%s%s + 0x%lx }", + (void*)address, delim, modname, delim, symname, + (unsigned long)offset); + + } +#endif + + /* looks like we're off in user-land, so let's walk all the + * mappings of all our processes and see if we can't be a whee + * bit more specific + */ + write_lock_irq(&tasklist_lock); + for_each_process(p) { + mm = get_task_mm(p); + if (!mm) + continue; + + vml = mm->context.vmlist; + while (vml) { + struct vm_area_struct *vma = vml->vma; + + if (address >= vma->vm_start && address < vma->vm_end) { + char *name = p->comm; + struct file *file = vma->vm_file; + if (file) { + char _tmpbuf[256]; + name = d_path(file->f_dentry, + file->f_vfsmnt, + _tmpbuf, + sizeof(_tmpbuf)); + } + + write_unlock_irq(&tasklist_lock); + return printk("<0x%p> [ %s + 0x%lx ]", + (void*)address, name, + (unsigned long) + ((address - vma->vm_start) + + (vma->vm_pgoff << PAGE_SHIFT))); + } + + vml = vml->next; + } + } + write_unlock_irq(&tasklist_lock); + + /* we were unable to find this address anywhere */ + return printk("[<0x%p>]", (void*)address); +} + +#define trace_buffer_save(x) \ + do { \ + (x) = bfin_read_TBUFCTL(); \ + bfin_write_TBUFCTL((x) & ~TBUFEN); \ + } while (0) +#define trace_buffer_restore(x) \ + do { \ + bfin_write_TBUFCTL((x)); \ + } while (0) + +asmlinkage void trap_c(struct pt_regs *fp) +{ + int j, sig = 0; + siginfo_t info; + unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE; + +#ifdef CONFIG_KGDB +# define CHK_DEBUGGER_TRAP() do { CHK_DEBUGGER(trapnr, sig, info.si_code, fp,); } while (0) +# define CHK_DEBUGGER_TRAP_MAYBE() do { if (kgdb_connected) CHK_DEBUGGER_TRAP(); } while (0) +#else +# define CHK_DEBUGGER_TRAP() do { } while (0) +# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0) +#endif + + trace_buffer_save(j); + + /* trap_c() will be called for exceptions. During exceptions + * processing, the pc value should be set with retx value. + * With this change we can cleanup some code in signal.c- TODO + */ + fp->orig_pc = fp->retx; + /* printk("exception: 0x%x, ipend=%x, reti=%x, retx=%x\n", + trapnr, fp->ipend, fp->pc, fp->retx); */ + + /* send the appropriate signal to the user program */ + switch (trapnr) { + + /* This table works in conjuction with the one in ./mach-common/entry.S + * Some exceptions are handled there (in assembly, in exception space) + * Some are handled here, (in C, in interrupt space) + * Some, like CPLB, are handled in both, where the normal path is + * handled in assembly/exception space, and the error path is handled + * here + */ + + /* 0x00 - Linux Syscall, getting here is an error */ + /* 0x01 - userspace gdb breakpoint, handled here */ + case VEC_EXCPT01: + info.si_code = TRAP_ILLTRAP; + sig = SIGTRAP; + CHK_DEBUGGER_TRAP_MAYBE(); + /* Check if this is a breakpoint in kernel space */ + if (fp->ipend & 0xffc0) + return; + else + break; +#ifdef CONFIG_KGDB + case VEC_EXCPT02 : /* gdb connection */ + info.si_code = TRAP_ILLTRAP; + sig = SIGTRAP; + CHK_DEBUGGER_TRAP(); + return; +#else + /* 0x02 - User Defined, Caught by default */ +#endif + /* 0x03 - Atomic test and set */ + case VEC_EXCPT03: + info.si_code = SEGV_STACKFLOW; + sig = SIGSEGV; + printk(KERN_EMERG EXC_0x03); + CHK_DEBUGGER_TRAP(); + break; + /* 0x04 - spinlock - handled by _ex_spinlock, + getting here is an error */ + /* 0x05 - User Defined, Caught by default */ + /* 0x06 - User Defined, Caught by default */ + /* 0x07 - User Defined, Caught by default */ + /* 0x08 - User Defined, Caught by default */ + /* 0x09 - User Defined, Caught by default */ + /* 0x0A - User Defined, Caught by default */ + /* 0x0B - User Defined, Caught by default */ + /* 0x0C - User Defined, Caught by default */ + /* 0x0D - User Defined, Caught by default */ + /* 0x0E - User Defined, Caught by default */ + /* 0x0F - User Defined, Caught by default */ + /* 0x10 HW Single step, handled here */ + case VEC_STEP: + info.si_code = TRAP_STEP; + sig = SIGTRAP; + CHK_DEBUGGER_TRAP_MAYBE(); + /* Check if this is a single step in kernel space */ + if (fp->ipend & 0xffc0) + return; + else + break; + /* 0x11 - Trace Buffer Full, handled here */ + case VEC_OVFLOW: + info.si_code = TRAP_TRACEFLOW; + sig = SIGTRAP; + printk(KERN_EMERG EXC_0x11); + CHK_DEBUGGER_TRAP(); + break; + /* 0x12 - Reserved, Caught by default */ + /* 0x13 - Reserved, Caught by default */ + /* 0x14 - Reserved, Caught by default */ + /* 0x15 - Reserved, Caught by default */ + /* 0x16 - Reserved, Caught by default */ + /* 0x17 - Reserved, Caught by default */ + /* 0x18 - Reserved, Caught by default */ + /* 0x19 - Reserved, Caught by default */ + /* 0x1A - Reserved, Caught by default */ + /* 0x1B - Reserved, Caught by default */ + /* 0x1C - Reserved, Caught by default */ + /* 0x1D - Reserved, Caught by default */ + /* 0x1E - Reserved, Caught by default */ + /* 0x1F - Reserved, Caught by default */ + /* 0x20 - Reserved, Caught by default */ + /* 0x21 - Undefined Instruction, handled here */ + case VEC_UNDEF_I: + info.si_code = ILL_ILLOPC; + sig = SIGILL; + printk(KERN_EMERG EXC_0x21); + CHK_DEBUGGER_TRAP(); + break; + /* 0x22 - Illegal Instruction Combination, handled here */ + case VEC_ILGAL_I: + info.si_code = ILL_ILLPARAOP; + sig = SIGILL; + printk(KERN_EMERG EXC_0x22); + CHK_DEBUGGER_TRAP(); + break; + /* 0x23 - Data CPLB Protection Violation, + normal case is handled in _cplb_hdr */ + case VEC_CPLB_VL: + info.si_code = ILL_CPLB_VI; + sig = SIGILL; + printk(KERN_EMERG EXC_0x23); + CHK_DEBUGGER_TRAP(); + break; + /* 0x24 - Data access misaligned, handled here */ + case VEC_MISALI_D: + info.si_code = BUS_ADRALN; + sig = SIGBUS; + printk(KERN_EMERG EXC_0x24); + CHK_DEBUGGER_TRAP(); + break; + /* 0x25 - Unrecoverable Event, handled here */ + case VEC_UNCOV: + info.si_code = ILL_ILLEXCPT; + sig = SIGILL; + printk(KERN_EMERG EXC_0x25); + CHK_DEBUGGER_TRAP(); + break; + /* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr, + error case is handled here */ + case VEC_CPLB_M: + info.si_code = BUS_ADRALN; + sig = SIGBUS; + printk(KERN_EMERG EXC_0x26); + CHK_DEBUGGER_TRAP(); + break; + /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */ + case VEC_CPLB_MHIT: + info.si_code = ILL_CPLB_MULHIT; +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO + sig = SIGSEGV; + printk(KERN_EMERG "\n\nNULL pointer access (probably)\n"); +#else + sig = SIGILL; + printk(KERN_EMERG EXC_0x27); +#endif + CHK_DEBUGGER_TRAP(); + break; + /* 0x28 - Emulation Watchpoint, handled here */ + case VEC_WATCH: + info.si_code = TRAP_WATCHPT; + sig = SIGTRAP; + pr_debug(EXC_0x28); + CHK_DEBUGGER_TRAP_MAYBE(); + /* Check if this is a watchpoint in kernel space */ + if (fp->ipend & 0xffc0) + return; + else + break; +#ifdef CONFIG_BF535 + /* 0x29 - Instruction fetch access error (535 only) */ + case VEC_ISTRU_VL: /* ADSP-BF535 only (MH) */ + info.si_code = BUS_OPFETCH; + sig = SIGBUS; + printk(KERN_EMERG "BF535: VEC_ISTRU_VL\n"); + CHK_DEBUGGER_TRAP(); + break; +#else + /* 0x29 - Reserved, Caught by default */ +#endif + /* 0x2A - Instruction fetch misaligned, handled here */ + case VEC_MISALI_I: + info.si_code = BUS_ADRALN; + sig = SIGBUS; + printk(KERN_EMERG EXC_0x2A); + CHK_DEBUGGER_TRAP(); + break; + /* 0x2B - Instruction CPLB protection Violation, + handled in _cplb_hdr */ + case VEC_CPLB_I_VL: + info.si_code = ILL_CPLB_VI; + sig = SIGILL; + printk(KERN_EMERG EXC_0x2B); + CHK_DEBUGGER_TRAP(); + break; + /* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */ + case VEC_CPLB_I_M: + info.si_code = ILL_CPLB_MISS; + sig = SIGBUS; + printk(KERN_EMERG EXC_0x2C); + CHK_DEBUGGER_TRAP(); + break; + /* 0x2D - Instruction CPLB Multiple Hits, handled here */ + case VEC_CPLB_I_MHIT: + info.si_code = ILL_CPLB_MULHIT; +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO + sig = SIGSEGV; + printk(KERN_EMERG "\n\nJump to address 0 - 0x0fff\n"); +#else + sig = SIGILL; + printk(KERN_EMERG EXC_0x2D); +#endif + CHK_DEBUGGER_TRAP(); + break; + /* 0x2E - Illegal use of Supervisor Resource, handled here */ + case VEC_ILL_RES: + info.si_code = ILL_PRVOPC; + sig = SIGILL; + printk(KERN_EMERG EXC_0x2E); + CHK_DEBUGGER_TRAP(); + break; + /* 0x2F - Reserved, Caught by default */ + /* 0x30 - Reserved, Caught by default */ + /* 0x31 - Reserved, Caught by default */ + /* 0x32 - Reserved, Caught by default */ + /* 0x33 - Reserved, Caught by default */ + /* 0x34 - Reserved, Caught by default */ + /* 0x35 - Reserved, Caught by default */ + /* 0x36 - Reserved, Caught by default */ + /* 0x37 - Reserved, Caught by default */ + /* 0x38 - Reserved, Caught by default */ + /* 0x39 - Reserved, Caught by default */ + /* 0x3A - Reserved, Caught by default */ + /* 0x3B - Reserved, Caught by default */ + /* 0x3C - Reserved, Caught by default */ + /* 0x3D - Reserved, Caught by default */ + /* 0x3E - Reserved, Caught by default */ + /* 0x3F - Reserved, Caught by default */ + default: + info.si_code = TRAP_ILLTRAP; + sig = SIGTRAP; + printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n", + (fp->seqstat & SEQSTAT_EXCAUSE)); + CHK_DEBUGGER_TRAP(); + break; + } + + info.si_signo = sig; + info.si_errno = 0; + info.si_addr = (void *)fp->pc; + force_sig_info(sig, &info, current); + if (sig != 0 && sig != SIGTRAP) { + unsigned long stack; + dump_bfin_regs(fp, (void *)fp->retx); + dump_bfin_trace_buffer(); + show_stack(current, &stack); + if (current->mm == NULL) + panic("Kernel exception"); + } + + /* if the address that we are about to return to is not valid, set it + * to a valid address, if we have a current application or panic + */ + if (!(fp->pc <= physical_mem_end +#if L1_CODE_LENGTH != 0 + || (fp->pc >= L1_CODE_START && + fp->pc <= (L1_CODE_START + L1_CODE_LENGTH)) +#endif + )) { + if (current->mm) { + fp->pc = current->mm->start_code; + } else { + printk(KERN_EMERG "I can't return to memory that doesn't exist - bad things happen\n"); + panic("Help - I've fallen and can't get up\n"); + } + } + + trace_buffer_restore(j); + return; +} + +/* Typical exception handling routines */ + +void dump_bfin_trace_buffer(void) +{ + int tflags; + trace_buffer_save(tflags); + + if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { + int i; + printk(KERN_EMERG "Hardware Trace:\n"); + for (i = 0; bfin_read_TBUFSTAT() & TBUFCNT; i++) { + printk(KERN_EMERG "%2i Target : ", i); + printk_address((unsigned long)bfin_read_TBUF()); + printk("\n" KERN_EMERG " Source : "); + printk_address((unsigned long)bfin_read_TBUF()); + printk("\n"); + } + } + + trace_buffer_restore(tflags); +} +EXPORT_SYMBOL(dump_bfin_trace_buffer); + +static void show_trace(struct task_struct *tsk, unsigned long *sp) +{ + unsigned long addr; + + printk("\nCall Trace:"); +#ifdef CONFIG_KALLSYMS + printk("\n"); +#endif + + while (!kstack_end(sp)) { + addr = *sp++; + /* + * If the address is either in the text segment of the + * kernel, or in the region which contains vmalloc'ed + * memory, it *may* be the address of a calling + * routine; if so, print it so that someone tracing + * down the cause of the crash will be able to figure + * out the call path that was taken. + */ + if (kernel_text_address(addr)) + print_ip_sym(addr); + } + + printk("\n"); +} + +void show_stack(struct task_struct *task, unsigned long *stack) +{ + unsigned long *endstack, addr; + int i; + + /* Cannot call dump_bfin_trace_buffer() here as show_stack() is + * called externally in some places in the kernel. + */ + + if (!stack) { + if (task) + stack = (unsigned long *)task->thread.ksp; + else + stack = (unsigned long *)&stack; + } + + addr = (unsigned long)stack; + endstack = (unsigned long *)PAGE_ALIGN(addr); + + printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack); + for (i = 0; i < kstack_depth_to_print; i++) { + if (stack + 1 > endstack) + break; + if (i % 8 == 0) + printk("\n" KERN_EMERG " "); + printk(" %08lx", *stack++); + } + + show_trace(task, stack); +} + +void dump_stack(void) +{ + unsigned long stack; + int tflags; + trace_buffer_save(tflags); + dump_bfin_trace_buffer(); + show_stack(current, &stack); + trace_buffer_restore(tflags); +} + +EXPORT_SYMBOL(dump_stack); + +void dump_bfin_regs(struct pt_regs *fp, void *retaddr) +{ + if (current->pid) { + printk("\nCURRENT PROCESS:\n\n"); + printk("COMM=%s PID=%d\n", current->comm, current->pid); + } else { + printk + ("\nNo Valid pid - Either things are really messed up, or you are in the kernel\n"); + } + + if (current->mm) { + printk("TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + "BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n", + (void*)current->mm->start_code, + (void*)current->mm->end_code, + (void*)current->mm->start_data, + (void*)current->mm->end_data, + (void*)current->mm->end_data, + (void*)current->mm->brk, + (void*)current->mm->start_stack); + } + + printk("return address: 0x%p; contents of [PC-16...PC+8]:\n", retaddr); + if (retaddr != 0 && retaddr <= (void*)physical_mem_end +#if L1_CODE_LENGTH != 0 + /* FIXME: Copy the code out of L1 Instruction SRAM through dma + memcpy. */ + && !(retaddr >= (void*)L1_CODE_START + && retaddr < (void*)(L1_CODE_START + L1_CODE_LENGTH)) +#endif + ) { + int i = 0; + unsigned short x = 0; + for (i = -16; i < 8; i++) { + if (get_user(x, (unsigned short *)retaddr + i)) + break; +#ifndef CONFIG_DEBUG_HWERR + /* If one of the last few instructions was a STI + * it is likily that the error occured awhile ago + * and we just noticed + */ + if (x >= 0x0040 && x <= 0x0047 && i <= 0) + panic("\n\nWARNING : You should reconfigure the kernel to turn on\n" + " 'Hardware error interrupt debugging'\n" + " The rest of this error is meanless\n"); +#endif + + if (i == -8) + printk("\n"); + if (i == 0) + printk("X\n"); + printk("%04x ", x); + } + } else + printk("Cannot look at the [PC] for it is in unreadable L1 SRAM - sorry\n"); + + printk("\n\n"); + + printk("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", + fp->rete, fp->retn, fp->retx, fp->rets); + printk("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); + printk("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); + printk("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", + fp->r0, fp->r1, fp->r2, fp->r3); + printk("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", + fp->r4, fp->r5, fp->r6, fp->r7); + printk("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", + fp->p0, fp->p1, fp->p2, fp->p3); + printk("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, fp->fp); + printk("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + printk("LB0: %08lx LT0: %08lx LC0: %08lx\n", fp->lb0, fp->lt0, + fp->lc0); + printk("LB1: %08lx LT1: %08lx LC1: %08lx\n", fp->lb1, fp->lt1, + fp->lc1); + printk("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", fp->b0, fp->l0, + fp->m0, fp->i0); + printk("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", fp->b1, fp->l1, + fp->m1, fp->i1); + printk("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", fp->b2, fp->l2, + fp->m2, fp->i2); + printk("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", fp->b3, fp->l3, + fp->m3, fp->i3); + + printk("\nUSP: %08lx ASTAT: %08lx\n", rdusp(), fp->astat); + if ((long)fp->seqstat & SEQSTAT_EXCAUSE) { + printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void*)bfin_read_DCPLB_FAULT_ADDR()); + printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void*)bfin_read_ICPLB_FAULT_ADDR()); + } + + printk("\n\n"); +} + +#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1 +asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text)); +#endif + +asmlinkage int sys_bfin_spinlock(int *spinlock) +{ + int ret = 0; + int tmp = 0; + + local_irq_disable(); + ret = get_user(tmp, spinlock); + if (ret == 0) { + if (tmp) + ret = 1; + tmp = 1; + put_user(tmp, spinlock); + } + local_irq_enable(); + return ret; +} + +void panic_cplb_error(int cplb_panic, struct pt_regs *fp) +{ + switch (cplb_panic) { + case CPLB_NO_UNLOCKED: + printk(KERN_EMERG "All CPLBs are locked\n"); + break; + case CPLB_PROT_VIOL: + return; + case CPLB_NO_ADDR_MATCH: + return; + case CPLB_UNKNOWN_ERR: + printk(KERN_EMERG "Unknown CPLB Exception\n"); + break; + } + + printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void*)bfin_read_DCPLB_FAULT_ADDR()); + printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void*)bfin_read_ICPLB_FAULT_ADDR()); + dump_bfin_regs(fp, (void *)fp->retx); + dump_stack(); + panic("Unrecoverable event\n"); +} diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S new file mode 100644 index 0000000000..6ae9ebbd8e --- /dev/null +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -0,0 +1,228 @@ +/* + * File: arch/blackfin/kernel/vmlinux.lds.S + * Based on: none - original work + * Author: + * + * Created: Tue Sep 21 2004 + * Description: Master linker script for blackfin architecture + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define VMLINUX_SYMBOL(_sym_) _##_sym_ + +#include +#include + + +OUTPUT_FORMAT("elf32-bfin") +ENTRY(__start) +_jiffies = _jiffies_64; + +MEMORY +{ + ram : ORIGIN = CONFIG_BOOT_LOAD, LENGTH = (CONFIG_MEM_SIZE * 1024 * 1024) - (CONFIG_BOOT_LOAD) + l1_data_a : ORIGIN = L1_DATA_A_START, LENGTH = L1_DATA_A_LENGTH + l1_data_b : ORIGIN = L1_DATA_B_START, LENGTH = L1_DATA_B_LENGTH + l1_code : ORIGIN = L1_CODE_START, LENGTH = L1_CODE_LENGTH + l1_scratch : ORIGIN = L1_SCRATCH_START, LENGTH = L1_SCRATCH_LENGTH +} + +SECTIONS +{ + . = CONFIG_BOOT_LOAD; + + .text : + { + _text = .; + __stext = .; + *(.text) + SCHED_TEXT + *(.text.lock) + . = ALIGN(16); + ___start___ex_table = .; + *(__ex_table) + ___stop___ex_table = .; + + *($code) + *(.rodata) + *(.rodata.*) + *(__vermagic) /* Kernel version magic */ + *(.rodata1) + *(.fixup) + *(.spinlock.text) + + /* Kernel symbol table: Normal symbols */ + . = ALIGN(4); + ___start___ksymtab = .; + *(__ksymtab) + ___stop___ksymtab = .; + + /* Kernel symbol table: GPL-only symbols */ + ___start___ksymtab_gpl = .; + *(__ksymtab_gpl) + ___stop___ksymtab_gpl = .; + + /* Kernel symbol table: Normal unused symbols */ \ + ___start___ksymtab_unused = .; + *(__ksymtab_unused) + ___stop___ksymtab_unused = .; + + /* Kernel symbol table: GPL-only unused symbols */ + ___start___ksymtab_unused_gpl = .; + *(__ksymtab_unused_gpl) + ___stop___ksymtab_unused_gpl = .; + + + /* Kernel symbol table: GPL-future symbols */ + ___start___ksymtab_gpl_future = .; + *(__ksymtab_gpl_future) + ___stop___ksymtab_gpl_future = .; + + /* Kernel symbol table: Normal symbols */ + ___start___kcrctab = .; + *(__kcrctab) + ___stop___kcrctab = .; + + /* Kernel symbol table: GPL-only symbols */ + ___start___kcrctab_gpl = .; + *(__kcrctab_gpl) + ___stop___kcrctab_gpl = .; + + /* Kernel symbol table: GPL-future symbols */ + ___start___kcrctab_gpl_future = .; + *(__kcrctab_gpl_future) + ___stop___kcrctab_gpl_future = .; + + /* Kernel symbol table: strings */ + *(__ksymtab_strings) + + . = ALIGN(4); + __etext = .; + } > ram + + .init : + { + . = ALIGN(4096); + ___init_begin = .; + __sinittext = .; + *(.init.text) + __einittext = .; + *(.init.data) + . = ALIGN(16); + ___setup_start = .; + *(.init.setup) + ___setup_end = .; + ___start___param = .; + *(__param) + ___stop___param = .; + ___initcall_start = .; + INITCALLS + ___initcall_end = .; + ___con_initcall_start = .; + *(.con_initcall.init) + ___con_initcall_end = .; + ___security_initcall_start = .; + *(.security_initcall.init) + ___security_initcall_end = .; + . = ALIGN(4); + ___initramfs_start = .; + *(.init.ramfs) + ___initramfs_end = .; + . = ALIGN(4); + ___init_end = .; + } > ram + + __l1_lma_start = .; + + .text_l1 : + { + . = ALIGN(4); + __stext_l1 = .; + *(.l1.text) + + . = ALIGN(4); + __etext_l1 = .; + } > l1_code AT > ram + + .data_l1 : + { + . = ALIGN(4); + __sdata_l1 = .; + *(.l1.data) + __edata_l1 = .; + + . = ALIGN(4); + __sbss_l1 = .; + *(.l1.bss) + + . = ALIGN(32); + *(.data_l1.cacheline_aligned) + + . = ALIGN(4); + __ebss_l1 = .; + } > l1_data_a AT > ram + .data_b_l1 : + { + . = ALIGN(4); + __sdata_b_l1 = .; + *(.l1.data.B) + __edata_b_l1 = .; + + . = ALIGN(4); + __sbss_b_l1 = .; + *(.l1.bss.B) + + . = ALIGN(4); + __ebss_b_l1 = .; + } > l1_data_b AT > ram + + .data : + { + __sdata = .; + . = ALIGN(0x2000); + *(.data.init_task) + *(.data) + + . = ALIGN(32); + *(.data.cacheline_aligned) + + . = ALIGN(0x2000); + __edata = .; + } > ram + + /DISCARD/ : { /* Exit code and data*/ + *(.exit.text) + *(.exit.data) + *(.exitcall.exit) + } > ram + + .bss : + { + . = ALIGN(4); + ___bss_start = .; + *(.bss) + *(COMMON) + . = ALIGN(4); + ___bss_stop = .; + __end = . ; + } > ram +} diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile new file mode 100644 index 0000000000..635288fc5f --- /dev/null +++ b/arch/blackfin/lib/Makefile @@ -0,0 +1,11 @@ +# +# arch/blackfin/lib/Makefile +# + +lib-y := \ + ashldi3.o ashrdi3.o lshrdi3.o \ + muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \ + checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \ + strcmp.o strcpy.o strncmp.o strncpy.o \ + umulsi3_highpart.o smulsi3_highpart.o \ + ins.o outs.o diff --git a/arch/blackfin/lib/ashldi3.c b/arch/blackfin/lib/ashldi3.c new file mode 100644 index 0000000000..a8c279e9b1 --- /dev/null +++ b/arch/blackfin/lib/ashldi3.c @@ -0,0 +1,58 @@ +/* + * File: arch/blackfin/lib/ashldi3.c + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "gcclib.h" + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +DItype __ashldi3(DItype u, word_type b)__attribute__((l1_text)); +#endif + +DItype __ashldi3(DItype u, word_type b) +{ + DIunion w; + word_type bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(SItype) * BITS_PER_UNIT) - b; + if (bm <= 0) { + w.s.low = 0; + w.s.high = (USItype) uu.s.low << -bm; + } else { + USItype carries = (USItype) uu.s.low >> bm; + w.s.low = (USItype) uu.s.low << b; + w.s.high = ((USItype) uu.s.high << b) | carries; + } + + return w.ll; +} diff --git a/arch/blackfin/lib/ashrdi3.c b/arch/blackfin/lib/ashrdi3.c new file mode 100644 index 0000000000..a0d3419329 --- /dev/null +++ b/arch/blackfin/lib/ashrdi3.c @@ -0,0 +1,59 @@ +/* + * File: arch/blackfin/lib/ashrdi3.c + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "gcclib.h" + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +DItype __ashrdi3(DItype u, word_type b)__attribute__((l1_text)); +#endif + +DItype __ashrdi3(DItype u, word_type b) +{ + DIunion w; + word_type bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(SItype) * BITS_PER_UNIT) - b; + if (bm <= 0) { + /* w.s.high = 1..1 or 0..0 */ + w.s.high = uu.s.high >> (sizeof(SItype) * BITS_PER_UNIT - 1); + w.s.low = uu.s.high >> -bm; + } else { + USItype carries = (USItype) uu.s.high << bm; + w.s.high = uu.s.high >> b; + w.s.low = ((USItype) uu.s.low >> b) | carries; + } + + return w.ll; +} diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c new file mode 100644 index 0000000000..42768e0c80 --- /dev/null +++ b/arch/blackfin/lib/checksum.c @@ -0,0 +1,140 @@ +/* + * File: arch/blackfin/lib/checksum.c + * Based on: none - original work + * Author: + * + * Created: + * Description: An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +#ifdef CONFIG_IP_CHECKSUM_L1 +static unsigned short do_csum(const unsigned char *buff, int len)__attribute__((l1_text)); +#endif + +static unsigned short do_csum(const unsigned char *buff, int len) +{ + register unsigned long sum = 0; + int swappem = 0; + + if (1 & (unsigned long)buff) { + sum = *buff << 8; + buff++; + len--; + ++swappem; + } + + while (len > 1) { + sum += *(unsigned short *)buff; + buff += 2; + len -= 2; + } + + if (len > 0) + sum += *buff; + + /* Fold 32-bit sum to 16 bits */ + while (sum >> 16) + sum = (sum & 0xffff) + (sum >> 16); + + if (swappem) + sum = ((sum & 0xff00) >> 8) + ((sum & 0x00ff) << 8); + + return sum; + +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl) +{ + return ~do_csum(iph, ihl * 4); +} + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum) +{ + /* + * Just in case we get nasty checksum data... + * Like 0xffff6ec3 in the case of our IPv6 multicast header. + * We fold to begin with, as well as at the end. + */ + sum = (sum & 0xffff) + (sum >> 16); + + sum += do_csum(buff, len); + + sum = (sum & 0xffff) + (sum >> 16); + + return sum; +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +unsigned short ip_compute_csum(const unsigned char *buff, int len) +{ + return ~do_csum(buff, len); +} + +/* + * copy from fs while checksumming, otherwise like csum_partial + */ + +unsigned int +csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, + int len, int sum, int *csum_err) +{ + if (csum_err) + *csum_err = 0; + memcpy(dst, src, len); + return csum_partial(dst, len, sum); +} + +/* + * copy from ds while checksumming, otherwise like csum_partial + */ + +unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst, + int len, int sum) +{ + memcpy(dst, src, len); + return csum_partial(dst, len, sum); +} diff --git a/arch/blackfin/lib/divsi3.S b/arch/blackfin/lib/divsi3.S new file mode 100644 index 0000000000..3e29861852 --- /dev/null +++ b/arch/blackfin/lib/divsi3.S @@ -0,0 +1,216 @@ +/* + * File: arch/blackfin/lib/divsi3.S + * Based on: + * Author: + * + * Created: + * Description: 16 / 32 bit signed division. + * Special cases : + * 1) If(numerator == 0) + * return 0 + * 2) If(denominator ==0) + * return positive max = 0x7fffffff + * 3) If(numerator == denominator) + * return 1 + * 4) If(denominator ==1) + * return numerator + * 5) If(denominator == -1) + * return -numerator + * + * Operand : R0 - Numerator (i) + * R1 - Denominator (i) + * R0 - Quotient (o) + * Registers Used : R2-R7,P0-P2 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +.global ___divsi3; + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +.section .l1.text +#else +.text +#endif + +.align 2; +___divsi3 : + + + R3 = R0 ^ R1; + R0 = ABS R0; + + CC = V; + + r3 = rot r3 by -1; + r1 = abs r1; /* now both positive, r3.30 means "negate result", + ** r3.31 means overflow, add one to result + */ + cc = r0 < r1; + if cc jump .Lret_zero; + r2 = r1 >> 15; + cc = r2; + if cc jump .Lidents; + r2 = r1 << 16; + cc = r2 <= r0; + if cc jump .Lidents; + + DIVS(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + DIVQ(R0, R1); + + R0 = R0.L (Z); + r1 = r3 >> 31; /* add overflow issue back in */ + r0 = r0 + r1; + r1 = -r0; + cc = bittst(r3, 30); + if cc r0 = r1; + RTS; + +/* Can't use the primitives. Test common identities. +** If the identity is true, return the value in R2. +*/ + +.Lidents: + CC = R1 == 0; /* check for divide by zero */ + IF CC JUMP .Lident_return; + + CC = R0 == 0; /* check for division of zero */ + IF CC JUMP .Lzero_return; + + CC = R0 == R1; /* check for identical operands */ + IF CC JUMP .Lident_return; + + CC = R1 == 1; /* check for divide by 1 */ + IF CC JUMP .Lident_return; + + R2.L = ONES R1; + R2 = R2.L (Z); + CC = R2 == 1; + IF CC JUMP .Lpower_of_two; + + /* Identities haven't helped either. + ** Perform the full division process. + */ + + P1 = 31; /* Set loop counter */ + + [--SP] = (R7:5); /* Push registers R5-R7 */ + R2 = -R1; + [--SP] = R2; + R2 = R0 << 1; /* R2 lsw of dividend */ + R6 = R0 ^ R1; /* Get sign */ + R5 = R6 >> 31; /* Shift sign to LSB */ + + R0 = 0 ; /* Clear msw partial remainder */ + R2 = R2 | R5; /* Shift quotient bit */ + R6 = R0 ^ R1; /* Get new quotient bit */ + + LSETUP(.Llst,.Llend) LC0 = P1; /* Setup loop */ +.Llst: R7 = R2 >> 31; /* record copy of carry from R2 */ + R2 = R2 << 1; /* Shift 64 bit dividend up by 1 bit */ + R0 = R0 << 1 || R5 = [SP]; + R0 = R0 | R7; /* and add carry */ + CC = R6 < 0; /* Check quotient(AQ) */ + /* we might be subtracting divisor (AQ==0) */ + IF CC R5 = R1; /* or we might be adding divisor (AQ==1)*/ + R0 = R0 + R5; /* do add or subtract, as indicated by AQ */ + R6 = R0 ^ R1; /* Generate next quotient bit */ + R5 = R6 >> 31; + /* Assume AQ==1, shift in zero */ + BITTGL(R5,0); /* tweak AQ to be what we want to shift in */ +.Llend: R2 = R2 + R5; /* and then set shifted-in value to + ** tweaked AQ. + */ + r1 = r3 >> 31; + r2 = r2 + r1; + cc = bittst(r3,30); + r0 = -r2; + if !cc r0 = r2; + SP += 4; + (R7:5)= [SP++]; /* Pop registers R6-R7 */ + RTS; + +.Lident_return: + CC = R1 == 0; /* check for divide by zero => 0x7fffffff */ + R2 = -1 (X); + R2 >>= 1; + IF CC JUMP .Ltrue_ident_return; + + CC = R0 == R1; /* check for identical operands => 1 */ + R2 = 1 (Z); + IF CC JUMP .Ltrue_ident_return; + + R2 = R0; /* assume divide by 1 => numerator */ + /*FALLTHRU*/ + +.Ltrue_ident_return: + R0 = R2; /* Return an identity value */ + R2 = -R2; + CC = bittst(R3,30); + IF CC R0 = R2; +.Lzero_return: + RTS; /* ...including zero */ + +.Lpower_of_two: + /* Y has a single bit set, which means it's a power of two. + ** That means we can perform the division just by shifting + ** X to the right the appropriate number of bits + */ + + /* signbits returns the number of sign bits, minus one. + ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need + ** to shift right n-signbits spaces. It also means 0x80000000 + ** is a special case, because that *also* gives a signbits of 0 + */ + + R2 = R0 >> 31; + CC = R1 < 0; + IF CC JUMP .Ltrue_ident_return; + + R1.l = SIGNBITS R1; + R1 = R1.L (Z); + R1 += -30; + R0 = LSHIFT R0 by R1.L; + r1 = r3 >> 31; + r0 = r0 + r1; + R2 = -R0; // negate result if necessary + CC = bittst(R3,30); + IF CC R0 = R2; + RTS; + +.Lret_zero: + R0 = 0; + RTS; diff --git a/arch/blackfin/lib/gcclib.h b/arch/blackfin/lib/gcclib.h new file mode 100644 index 0000000000..9ccd39a135 --- /dev/null +++ b/arch/blackfin/lib/gcclib.h @@ -0,0 +1,47 @@ +/* + * File: arch/blackfin/lib/gcclib.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define BITS_PER_UNIT 8 +#define SI_TYPE_SIZE (sizeof (SItype) * BITS_PER_UNIT) + +typedef unsigned int UQItype __attribute__ ((mode(QI))); +typedef int SItype __attribute__ ((mode(SI))); +typedef unsigned int USItype __attribute__ ((mode(SI))); +typedef int DItype __attribute__ ((mode(DI))); +typedef int word_type __attribute__ ((mode(__word__))); +typedef unsigned int UDItype __attribute__ ((mode(DI))); + +struct DIstruct { + SItype low, high; +}; + +typedef union { + struct DIstruct s; + DItype ll; +} DIunion; diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S new file mode 100644 index 0000000000..730d2b4275 --- /dev/null +++ b/arch/blackfin/lib/ins.S @@ -0,0 +1,69 @@ +/* + * File: arch/blackfin/lib/ins.S + * Based on: + * Author: Bas Vermeulen + * + * Created: Tue Mar 22 15:27:24 CEST 2005 + * Description: Implementation of ins{bwl} for BlackFin processors using zero overhead loops. + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * Copyright (C) 2005 Bas Vermeulen, BuyWays BV + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +.align 2 + +ENTRY(_insl) + P0 = R0; /* P0 = port */ + cli R3; + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2; +.Llong_loop_s: R0 = [P0]; +.Llong_loop_e: [P1++] = R0; + sti R3; + RTS; + +ENTRY(_insw) + P0 = R0; /* P0 = port */ + cli R3; + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2; +.Lword_loop_s: R0 = W[P0]; +.Lword_loop_e: W[P1++] = R0; + sti R3; + RTS; + +ENTRY(_insb) + P0 = R0; /* P0 = port */ + cli R3; + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2; +.Lbyte_loop_s: R0 = B[P0]; +.Lbyte_loop_e: B[P1++] = R0; + sti R3; + RTS; diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c new file mode 100644 index 0000000000..84b9c55922 --- /dev/null +++ b/arch/blackfin/lib/lshrdi3.c @@ -0,0 +1,72 @@ +/* + * File: arch/blackfin/lib/lshrdi3.c + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define BITS_PER_UNIT 8 + +typedef int SItype __attribute__ ((mode(SI))); +typedef unsigned int USItype __attribute__ ((mode(SI))); +typedef int DItype __attribute__ ((mode(DI))); +typedef int word_type __attribute__ ((mode(__word__))); + +struct DIstruct { + SItype high, low; +}; + +typedef union { + struct DIstruct s; + DItype ll; +} DIunion; + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text)); +#endif + +DItype __lshrdi3(DItype u, word_type b) +{ + DIunion w; + word_type bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(SItype) * BITS_PER_UNIT) - b; + if (bm <= 0) { + w.s.high = 0; + w.s.low = (USItype) uu.s.high >> -bm; + } else { + USItype carries = (USItype) uu.s.high << bm; + w.s.high = (USItype) uu.s.high >> b; + w.s.low = ((USItype) uu.s.low >> b) | carries; + } + + return w.ll; +} diff --git a/arch/blackfin/lib/memchr.S b/arch/blackfin/lib/memchr.S new file mode 100644 index 0000000000..498122250d --- /dev/null +++ b/arch/blackfin/lib/memchr.S @@ -0,0 +1,70 @@ +/* + * File: arch/blackfin/lib/memchr.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +/* void *memchr(const void *s, int c, size_t n); + * R0 = address (s) + * R1 = sought byte (c) + * R2 = count (n) + * + * Returns pointer to located character. + */ + +.text + +.align 2 + +ENTRY(_memchr) + P0 = R0; /* P0 = address */ + P2 = R2; /* P2 = count */ + R1 = R1.B(Z); + CC = R2 == 0; + IF CC JUMP .Lfailed; + +.Lbytes: + LSETUP (.Lbyte_loop_s, .Lbyte_loop_e) LC0=P2; + +.Lbyte_loop_s: + R3 = B[P0++](Z); + CC = R3 == R1; + IF CC JUMP .Lfound; +.Lbyte_loop_e: + NOP; + +.Lfailed: + R0=0; + RTS; + +.Lfound: + R0 = P0; + R0 += -1; + RTS; + +.size _memchr,.-_memchr diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S new file mode 100644 index 0000000000..5b9502368f --- /dev/null +++ b/arch/blackfin/lib/memcmp.S @@ -0,0 +1,110 @@ +/* + * File: arch/blackfin/lib/memcmp.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +/* int memcmp(const void *s1, const void *s2, size_t n); + * R0 = First Address (s1) + * R1 = Second Address (s2) + * R2 = count (n) + * + * Favours word aligned data. + */ + +.text + +.align 2 + +ENTRY(_memcmp) + I1 = P3; + P0 = R0; /* P0 = s1 address */ + P3 = R1; /* P3 = s2 Address */ + P2 = R2 ; /* P2 = count */ + CC = R2 <= 7(IU); + IF CC JUMP .Ltoo_small; + I0 = R1; /* s2 */ + R1 = R1 | R0; /* OR addresses together */ + R1 <<= 30; /* check bottom two bits */ + CC = AZ; /* AZ set if zero. */ + IF !CC JUMP .Lbytes ; /* Jump if addrs not aligned. */ + + P1 = P2 >> 2; /* count = n/4 */ + R3 = 3; + R2 = R2 & R3; /* remainder */ + P2 = R2; /* set remainder */ + + LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1; +.Lquad_loop_s: + MNOP || R0 = [P0++] || R1 = [I0++]; + CC = R0 == R1; + IF !CC JUMP .Lquad_different; +.Lquad_loop_e: + NOP; + + P3 = I0; /* s2 */ +.Ltoo_small: + CC = P2 == 0; /* Check zero count*/ + IF CC JUMP .Lfinished; /* very unlikely*/ + +.Lbytes: + LSETUP (.Lbyte_loop_s, .Lbyte_loop_e) LC0=P2; +.Lbyte_loop_s: + R1 = B[P3++](Z); /* *s2 */ + R0 = B[P0++](Z); /* *s1 */ + CC = R0 == R1; + IF !CC JUMP .Ldifferent; +.Lbyte_loop_e: + NOP; + +.Ldifferent: + R0 = R0 - R1; + P3 = I1; + RTS; + +.Lquad_different: + /* We've read two quads which don't match. + * Can't just compare them, because we're + * a little-endian machine, so the MSBs of + * the regs occur at later addresses in the + * string. + * Arrange to re-read those two quads again, + * byte-by-byte. + */ + P0 += -4; /* back up to the start of the */ + P3 = I0; /* quads, and increase the*/ + P2 += 4; /* remainder count*/ + P3 += -4; + JUMP .Lbytes; + +.Lfinished: + R0 = 0; + P3 = I1; + RTS; + +.size _memcmp,.-_memcmp diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S new file mode 100644 index 0000000000..c1e00eff54 --- /dev/null +++ b/arch/blackfin/lib/memcpy.S @@ -0,0 +1,142 @@ +/* + * File: arch/blackfin/lib/memcpy.S + * Based on: + * Author: + * + * Created: + * Description: internal version of memcpy(), issued by the compiler + * to copy blocks of data around. + * This is really memmove() - it has to be able to deal with + * possible overlaps, because that ambiguity is when the compiler + * gives up and calls a function. We have our own, internal version + * so that we get something we trust, even if the user has redefined + * the normal symbol. + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +/* void *memcpy(void *dest, const void *src, size_t n); + * R0 = To Address (dest) (leave unchanged to form result) + * R1 = From Address (src) + * R2 = count + * + * Note: Favours word alignment + */ + +#ifdef CONFIG_MEMCPY_L1 +.section .l1.text +#else +.text +#endif + +.align 2 + +ENTRY(_memcpy) + CC = R2 <= 0; /* length not positive? */ + IF CC JUMP .L_P1L2147483647; /* Nothing to do */ + + P0 = R0 ; /* dst*/ + P1 = R1 ; /* src*/ + P2 = R2 ; /* length */ + + /* check for overlapping data */ + CC = R1 < R0; /* src < dst */ + IF !CC JUMP .Lno_overlap; + R3 = R1 + R2; + CC = R0 < R3; /* and dst < src+len */ + IF CC JUMP .Lhas_overlap; + +.Lno_overlap: + /* Check for aligned data.*/ + + R3 = R1 | R0; + R0 = 0x3; + R3 = R3 & R0; + CC = R3; /* low bits set on either address? */ + IF CC JUMP .Lnot_aligned; + + /* Both addresses are word-aligned, so we can copy + at least part of the data using word copies.*/ + P2 = P2 >> 2; + CC = P2 <= 2; + IF !CC JUMP .Lmore_than_seven; + /* less than eight bytes... */ + P2 = R2; + LSETUP(.Lthree_start, .Lthree_end) LC0=P2; + R0 = R1; /* setup src address for return */ +.Lthree_start: + R3 = B[P1++] (X); +.Lthree_end: + B[P0++] = R3; + + RTS; + +.Lmore_than_seven: + /* There's at least eight bytes to copy. */ + P2 += -1; /* because we unroll one iteration */ + LSETUP(.Lword_loop, .Lword_loop) LC0=P2; + R0 = R1; + I1 = P1; + R3 = [I1++]; +.Lword_loop: + MNOP || [P0++] = R3 || R3 = [I1++]; + + [P0++] = R3; + /* Any remaining bytes to copy? */ + R3 = 0x3; + R3 = R2 & R3; + CC = R3 == 0; + P1 = I1; /* in case there's something left, */ + IF !CC JUMP .Lbytes_left; + RTS; +.Lbytes_left: P2 = R3; +.Lnot_aligned: + /* From here, we're copying byte-by-byte. */ + LSETUP (.Lbyte_start, .Lbyte_end) LC0=P2; + R0 = R1; /* Save src address for return */ +.Lbyte_start: + R1 = B[P1++] (X); +.Lbyte_end: + B[P0++] = R1; + +.L_P1L2147483647: + RTS; + +.Lhas_overlap: + /* Need to reverse the copying, because the + * dst would clobber the src. + * Don't bother to work out alignment for + * the reverse case. + */ + R0 = R1; /* save src for later. */ + P0 = P0 + P2; + P0 += -1; + P1 = P1 + P2; + P1 += -1; + LSETUP(.Lover_start, .Lover_end) LC0=P2; +.Lover_start: + R1 = B[P1--] (X); +.Lover_end: + B[P0--] = R1; + + RTS; diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S new file mode 100644 index 0000000000..2e5fb7f8df --- /dev/null +++ b/arch/blackfin/lib/memmove.S @@ -0,0 +1,103 @@ +/* + * File: arch/blackfin/lib/memmove.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +.align 2 + +/* + * C Library function MEMMOVE + * R0 = To Address (leave unchanged to form result) + * R1 = From Address + * R2 = count + * Data may overlap + */ + +ENTRY(_memmove) + I1 = P3; + P0 = R0; /* P0 = To address */ + P3 = R1; /* P3 = From Address */ + P2 = R2; /* P2 = count */ + CC = P2 == 0; /* Check zero count*/ + IF CC JUMP .Lfinished; /* very unlikely */ + + CC = R1 < R0 (IU); /* From < To */ + IF !CC JUMP .Lno_overlap; + R3 = R1 + R2; + CC = R0 <= R3 (IU); /* (From+len) >= To */ + IF CC JUMP .Loverlap; +.Lno_overlap: + R3 = 11; + CC = R2 <= R3; + IF CC JUMP .Lbytes; + R3 = R1 | R0; /* OR addresses together */ + R3 <<= 30; /* check bottom two bits */ + CC = AZ; /* AZ set if zero.*/ + IF !CC JUMP .Lbytes; /* Jump if addrs not aligned.*/ + + I0 = P3; + P1 = P2 >> 2; /* count = n/4 */ + P1 += -1; + R3 = 3; + R2 = R2 & R3; /* remainder */ + P2 = R2; /* set remainder */ + R1 = [I0++]; + + LSETUP (.Lquad_loop, .Lquad_loop) LC0=P1; +.Lquad_loop: MNOP || [P0++] = R1 || R1 = [I0++]; + [P0++] = R1; + + CC = P2 == 0; /* any remaining bytes? */ + P3 = I0; /* Ammend P3 to updated ptr. */ + IF !CC JUMP .Lbytes; + P3 = I1; + RTS; + +.Lbytes: LSETUP (.Lbyte2_s, .Lbyte2_e) LC0=P2; +.Lbyte2_s: R1 = B[P3++](Z); +.Lbyte2_e: B[P0++] = R1; + +.Lfinished: P3 = I1; + RTS; + +.Loverlap: + P2 += -1; + P0 = P0 + P2; + P3 = P3 + P2; + R1 = B[P3--] (Z); + CC = P2 == 0; + IF CC JUMP .Lno_loop; + LSETUP (.Lol_s, .Lol_e) LC0 = P2; +.Lol_s: B[P0--] = R1; +.Lol_e: R1 = B[P3--] (Z); +.Lno_loop: B[P0] = R1; + P3 = I1; + RTS; + +.size _memmove,.-_memmove diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S new file mode 100644 index 0000000000..ba6d047568 --- /dev/null +++ b/arch/blackfin/lib/memset.S @@ -0,0 +1,109 @@ +/* + * File: arch/blackfin/lib/memset.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +.align 2 + +#ifdef CONFIG_MEMSET_L1 +.section .l1.text +#else +.text +#endif + +/* + * C Library function MEMSET + * R0 = address (leave unchanged to form result) + * R1 = filler byte + * R2 = count + * Favours word aligned data. + */ + +ENTRY(_memset) + P0 = R0 ; /* P0 = address */ + P2 = R2 ; /* P2 = count */ + R3 = R0 + R2; /* end */ + CC = R2 <= 7(IU); + IF CC JUMP .Ltoo_small; + R1 = R1.B (Z); /* R1 = fill char */ + R2 = 3; + R2 = R0 & R2; /* addr bottom two bits */ + CC = R2 == 0; /* AZ set if zero. */ + IF !CC JUMP .Lforce_align ; /* Jump if addr not aligned. */ + +.Laligned: + P1 = P2 >> 2; /* count = n/4 */ + R2 = R1 << 8; /* create quad filler */ + R2.L = R2.L + R1.L(NS); + R2.H = R2.L + R1.H(NS); + P2 = R3; + + LSETUP (.Lquad_loop , .Lquad_loop) LC0=P1; +.Lquad_loop: + [P0++] = R2; + + CC = P0 == P2; + IF !CC JUMP .Lbytes_left; + RTS; + +.Lbytes_left: + R2 = R3; /* end point */ + R3 = P0; /* current position */ + R2 = R2 - R3; /* bytes left */ + P2 = R2; + +.Ltoo_small: + CC = P2 == 0; /* Check zero count */ + IF CC JUMP .Lfinished; /* Unusual */ + +.Lbytes: + LSETUP (.Lbyte_loop , .Lbyte_loop) LC0=P2; +.Lbyte_loop: + B[P0++] = R1; + +.Lfinished: + RTS; + +.Lforce_align: + CC = BITTST (R0, 0); /* odd byte */ + R0 = 4; + R0 = R0 - R2; + P1 = R0; + R0 = P0; /* Recover return address */ + IF !CC JUMP .Lskip1; + B[P0++] = R1; +.Lskip1: + CC = R2 <= 2; /* 2 bytes */ + P2 -= P1; /* reduce count */ + IF !CC JUMP .Laligned; + B[P0++] = R1; + B[P0++] = R1; + JUMP .Laligned; + +.size _memset,.-_memset diff --git a/arch/blackfin/lib/modsi3.S b/arch/blackfin/lib/modsi3.S new file mode 100644 index 0000000000..528b8b1ccb --- /dev/null +++ b/arch/blackfin/lib/modsi3.S @@ -0,0 +1,79 @@ +/* + * File: arch/blackfin/lib/modsi3.S + * Based on: + * Author: + * + * Created: + * Description: This program computes 32 bit signed remainder. It calls div32 function + * for quotient estimation. + * + * Registers used : + * Numerator/ Denominator in R0, R1 + * R0 - returns remainder. + * R2-R7 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +.global ___modsi3; +.type ___modsi3, STT_FUNC; +.extern ___divsi3; +.type ___divsi3, STT_FUNC; + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +.section .l1.text +#else +.text +#endif + +___modsi3: + + CC=R0==0; + IF CC JUMP .LRETURN_R0; /* Return 0, if numerator == 0 */ + CC=R1==0; + IF CC JUMP .LRETURN_ZERO; /* Return 0, if denominator == 0 */ + CC=R0==R1; + IF CC JUMP .LRETURN_ZERO; /* Return 0, if numerator == denominator */ + CC = R1 == 1; + IF CC JUMP .LRETURN_ZERO; /* Return 0, if denominator == 1 */ + CC = R1 == -1; + IF CC JUMP .LRETURN_ZERO; /* Return 0, if denominator == -1 */ + + /* Valid input. Use __divsi3() to compute the quotient, and then + * derive the remainder from that. */ + + [--SP] = (R7:6); /* Push R7 and R6 */ + [--SP] = RETS; /* and return address */ + R7 = R0; /* Copy of R0 */ + R6 = R1; /* Save for later */ + SP += -12; /* Should always provide this space */ + CALL ___divsi3; /* Compute signed quotient using ___divsi3()*/ + SP += 12; + R0 *= R6; /* Quotient * divisor */ + R0 = R7 - R0; /* Dividend - (quotient * divisor) */ + RETS = [SP++]; /* Get back return address */ + (R7:6) = [SP++]; /* Pop registers R7 and R4 */ + RTS; /* Store remainder */ + +.LRETURN_ZERO: + R0 = 0; +.LRETURN_R0: + RTS; diff --git a/arch/blackfin/lib/muldi3.c b/arch/blackfin/lib/muldi3.c new file mode 100644 index 0000000000..303d0c6a6d --- /dev/null +++ b/arch/blackfin/lib/muldi3.c @@ -0,0 +1,99 @@ +/* + * File: arch/blackfin/lib/muldi3.c + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SI_TYPE_SIZE +#define SI_TYPE_SIZE 32 +#endif +#define __ll_b (1L << (SI_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((usitype) (t) % __ll_b) +#define __ll_highpart(t) ((usitype) (t) / __ll_b) +#define BITS_PER_UNIT 8 + +#if !defined(umul_ppmm) +#define umul_ppmm(w1, w0, u, v) \ + do { \ + usitype __x0, __x1, __x2, __x3; \ + usitype __ul, __vl, __uh, __vh; \ + \ + __ul = __ll_lowpart (u); \ + __uh = __ll_highpart (u); \ + __vl = __ll_lowpart (v); \ + __vh = __ll_highpart (v); \ + \ + __x0 = (usitype) __ul * __vl; \ + __x1 = (usitype) __ul * __vh; \ + __x2 = (usitype) __uh * __vl; \ + __x3 = (usitype) __uh * __vh; \ + \ + __x1 += __ll_highpart (__x0);/* this can't give carry */ \ + __x1 += __x2; /* but this indeed can */ \ + if (__x1 < __x2) /* did we get it? */ \ + __x3 += __ll_b; /* yes, add it in the proper pos. */ \ + \ + (w1) = __x3 + __ll_highpart (__x1); \ + (w0) = __ll_lowpart (__x1) * __ll_b + __ll_lowpart (__x0); \ + } while (0) +#endif + +#if !defined(__umulsidi3) +#define __umulsidi3(u, v) \ + ({diunion __w; \ + umul_ppmm (__w.s.high, __w.s.low, u, v); \ + __w.ll; }) +#endif + +typedef unsigned int usitype __attribute__ ((mode(SI))); +typedef int sitype __attribute__ ((mode(SI))); +typedef int ditype __attribute__ ((mode(DI))); +typedef int word_type __attribute__ ((mode(__word__))); + +struct distruct { + sitype low, high; +}; +typedef union { + struct distruct s; + ditype ll; +} diunion; + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +ditype __muldi3(ditype u, ditype v)__attribute__((l1_text)); +#endif + +ditype __muldi3(ditype u, ditype v) +{ + diunion w; + diunion uu, vv; + + uu.ll = u, vv.ll = v; + w.ll = __umulsidi3(uu.s.low, vv.s.low); + w.s.high += ((usitype) uu.s.low * (usitype) vv.s.high + + (usitype) uu.s.high * (usitype) vv.s.low); + + return w.ll; +} diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S new file mode 100644 index 0000000000..f8c876fe89 --- /dev/null +++ b/arch/blackfin/lib/outs.S @@ -0,0 +1,62 @@ +/* + * File: arch/blackfin/lib/outs.S + * Based on: + * Author: Bas Vermeulen + * + * Created: Tue Mar 22 15:27:24 CEST 2005 + * Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops. + * + * Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +.align 2 + +ENTRY(_outsl) + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + + LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2; +.Llong_loop_s: R0 = [P1++]; +.Llong_loop_e: [P0] = R0; + RTS; + +ENTRY(_outsw) + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + + LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2; +.Lword_loop_s: R0 = W[P1++]; +.Lword_loop_e: W[P0] = R0; + RTS; + +ENTRY(_outsb) + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + + LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2; +.Lbyte_loop_s: R0 = B[P1++]; +.Lbyte_loop_e: B[P0] = R0; + RTS; diff --git a/arch/blackfin/lib/smulsi3_highpart.S b/arch/blackfin/lib/smulsi3_highpart.S new file mode 100644 index 0000000000..10b8f8da57 --- /dev/null +++ b/arch/blackfin/lib/smulsi3_highpart.S @@ -0,0 +1,30 @@ +.align 2 +.global ___smulsi3_highpart; +.type ___smulsi3_highpart, STT_FUNC; + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +.section .l1.text +#else +.text +#endif + +___smulsi3_highpart: + R2 = R1.L * R0.L (FU); + R3 = R1.H * R0.L (IS,M); + R0 = R0.H * R1.H, R1 = R0.H * R1.L (IS,M); + + R1.L = R2.H + R1.L; + cc = ac0; + R2 = cc; + + R1.L = R1.L + R3.L; + cc = ac0; + R1 >>>= 16; + R3 >>>= 16; + R1 = R1 + R3; + R1 = R1 + R2; + R2 = cc; + R1 = R1 + R2; + + R0 = R0 + R1; + RTS; diff --git a/arch/blackfin/lib/strcmp.c b/arch/blackfin/lib/strcmp.c new file mode 100644 index 0000000000..2ad47c4254 --- /dev/null +++ b/arch/blackfin/lib/strcmp.c @@ -0,0 +1,11 @@ +#include + +#define strcmp __inline_strcmp +#include +#undef strcmp + +int strcmp(const char *dest, const char *src) +{ + return __inline_strcmp(dest, src); +} + diff --git a/arch/blackfin/lib/strcpy.c b/arch/blackfin/lib/strcpy.c new file mode 100644 index 0000000000..4dc835a8a1 --- /dev/null +++ b/arch/blackfin/lib/strcpy.c @@ -0,0 +1,11 @@ +#include + +#define strcpy __inline_strcpy +#include +#undef strcpy + +char *strcpy(char *dest, const char *src) +{ + return __inline_strcpy(dest, src); +} + diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c new file mode 100644 index 0000000000..947bcfe3f3 --- /dev/null +++ b/arch/blackfin/lib/strncmp.c @@ -0,0 +1,11 @@ +#include + +#define strncmp __inline_strncmp +#include +#undef strncmp + +int strncmp(const char *cs, const char *ct, size_t count) +{ + return __inline_strncmp(cs, ct, count); +} + diff --git a/arch/blackfin/lib/strncpy.c b/arch/blackfin/lib/strncpy.c new file mode 100644 index 0000000000..77a9b2e950 --- /dev/null +++ b/arch/blackfin/lib/strncpy.c @@ -0,0 +1,11 @@ +#include + +#define strncpy __inline_strncpy +#include +#undef strncpy + +char *strncpy(char *dest, const char *src, size_t n) +{ + return __inline_strncpy(dest, src, n); +} + diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S new file mode 100644 index 0000000000..d39a129162 --- /dev/null +++ b/arch/blackfin/lib/udivsi3.S @@ -0,0 +1,298 @@ +/* + * File: arch/blackfin/lib/udivsi3.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +#define CARRY AC0 + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +.section .l1.text +#else +.text +#endif + + +ENTRY(___udivsi3) + + CC = R0 < R1 (IU); /* If X < Y, always return 0 */ + IF CC JUMP .Lreturn_ident; + + R2 = R1 << 16; + CC = R2 <= R0 (IU); + IF CC JUMP .Lidents; + + R2 = R0 >> 31; /* if X is a 31-bit number */ + R3 = R1 >> 15; /* and Y is a 15-bit number */ + R2 = R2 | R3; /* then it's okay to use the DIVQ builtins (fallthrough to fast)*/ + CC = R2; + IF CC JUMP .Ly_16bit; + +/* METHOD 1: FAST DIVQ + We know we have a 31-bit dividend, and 15-bit divisor so we can use the + simple divq approach (first setting AQ to 0 - implying unsigned division, + then 16 DIVQ's). +*/ + + AQ = CC; /* Clear AQ (CC==0) */ + +/* ISR States: When dividing two integers (32.0/16.0) using divide primitives, + we need to shift the dividend one bit to the left. + We have already checked that we have a 31-bit number so we are safe to do + that. +*/ + R0 <<= 1; + DIVQ(R0, R1); // 1 + DIVQ(R0, R1); // 2 + DIVQ(R0, R1); // 3 + DIVQ(R0, R1); // 4 + DIVQ(R0, R1); // 5 + DIVQ(R0, R1); // 6 + DIVQ(R0, R1); // 7 + DIVQ(R0, R1); // 8 + DIVQ(R0, R1); // 9 + DIVQ(R0, R1); // 10 + DIVQ(R0, R1); // 11 + DIVQ(R0, R1); // 12 + DIVQ(R0, R1); // 13 + DIVQ(R0, R1); // 14 + DIVQ(R0, R1); // 15 + DIVQ(R0, R1); // 16 + R0 = R0.L (Z); + RTS; + +.Ly_16bit: + /* We know that the upper 17 bits of Y might have bits set, + ** or that the sign bit of X might have a bit. If Y is a + ** 16-bit number, but not bigger, then we can use the builtins + ** with a post-divide correction. + ** R3 currently holds Y>>15, which means R3's LSB is the + ** bit we're interested in. + */ + + /* According to the ISR, to use the Divide primitives for + ** unsigned integer divide, the useable range is 31 bits + */ + CC = ! BITTST(R0, 31); + + /* IF condition is true we can scale our inputs and use the divide primitives, + ** with some post-adjustment + */ + R3 += -1; /* if so, Y is 0x00008nnn */ + CC &= AZ; + + /* If condition is true we can scale our inputs and use the divide primitives, + ** with some post-adjustment + */ + R3 = R1 >> 1; /* Pre-scaled divisor for primitive case */ + R2 = R0 >> 16; + + R2 = R3 - R2; /* shifted divisor < upper 16 bits of dividend */ + CC &= CARRY; + IF CC JUMP .Lshift_and_correct; + + /* Fall through to the identities */ + +/* METHOD 2: identities and manual calculation + We are not able to use the divide primites, but may still catch some special + cases. +*/ +.Lidents: + /* Test for common identities. Value to be returned is placed in R2. */ + CC = R0 == 0; /* 0/Y => 0 */ + IF CC JUMP .Lreturn_r0; + CC = R0 == R1; /* X==Y => 1 */ + IF CC JUMP .Lreturn_ident; + CC = R1 == 1; /* X/1 => X */ + IF CC JUMP .Lreturn_ident; + + R2.L = ONES R1; + R2 = R2.L (Z); + CC = R2 == 1; + IF CC JUMP .Lpower_of_two; + + [--SP] = (R7:5); /* Push registers R5-R7 */ + + /* Idents don't match. Go for the full operation. */ + + + R6 = 2; /* assume we'll shift two */ + R3 = 1; + + P2 = R1; + /* If either R0 or R1 have sign set, */ + /* divide them by two, and note it's */ + /* been done. */ + CC = R1 < 0; + R2 = R1 >> 1; + IF CC R1 = R2; /* Possibly-shifted R1 */ + IF !CC R6 = R3; /* R1 doesn't, so at most 1 shifted */ + + P0 = 0; + R3 = -R1; + [--SP] = R3; + R2 = R0 >> 1; + R2 = R0 >> 1; + CC = R0 < 0; + IF CC P0 = R6; /* Number of values divided */ + IF !CC R2 = R0; /* Shifted R0 */ + + /* P0 is 0, 1 (NR/=2) or 2 (NR/=2, DR/=2) */ + + /* r2 holds Copy dividend */ + R3 = 0; /* Clear partial remainder */ + R7 = 0; /* Initialise quotient bit */ + + P1 = 32; /* Set loop counter */ + LSETUP(.Lulst, .Lulend) LC0 = P1; /* Set loop counter */ +.Lulst: R6 = R2 >> 31; /* R6 = sign bit of R2, for carry */ + R2 = R2 << 1; /* Shift 64 bit dividend up by 1 bit */ + R3 = R3 << 1 || R5 = [SP]; + R3 = R3 | R6; /* Include any carry */ + CC = R7 < 0; /* Check quotient(AQ) */ + /* If AQ==0, we'll sub divisor */ + IF CC R5 = R1; /* and if AQ==1, we'll add it. */ + R3 = R3 + R5; /* Add/sub divsor to partial remainder */ + R7 = R3 ^ R1; /* Generate next quotient bit */ + + R5 = R7 >> 31; /* Get AQ */ + BITTGL(R5, 0); /* Invert it, to get what we'll shift */ +.Lulend: R2 = R2 + R5; /* and "shift" it in. */ + + CC = P0 == 0; /* Check how many inputs we shifted */ + IF CC JUMP .Lno_mult; /* if none... */ + R6 = R2 << 1; + CC = P0 == 1; + IF CC R2 = R6; /* if 1, Q = Q*2 */ + IF !CC R1 = P2; /* if 2, restore stored divisor */ + + R3 = R2; /* Copy of R2 */ + R3 *= R1; /* Q * divisor */ + R5 = R0 - R3; /* Z = (dividend - Q * divisor) */ + CC = R1 <= R5 (IU); /* Check if divisor <= Z? */ + R6 = CC; /* if yes, R6 = 1 */ + R2 = R2 + R6; /* if yes, add one to quotient(Q) */ +.Lno_mult: + SP += 4; + (R7:5) = [SP++]; /* Pop registers R5-R7 */ + R0 = R2; /* Store quotient */ + RTS; + +.Lreturn_ident: + CC = R0 < R1 (IU); /* If X < Y, always return 0 */ + R2 = 0; + IF CC JUMP .Ltrue_return_ident; + R2 = -1 (X); /* X/0 => 0xFFFFFFFF */ + CC = R1 == 0; + IF CC JUMP .Ltrue_return_ident; + R2 = -R2; /* R2 now 1 */ + CC = R0 == R1; /* X==Y => 1 */ + IF CC JUMP .Ltrue_return_ident; + R2 = R0; /* X/1 => X */ + /*FALLTHRU*/ + +.Ltrue_return_ident: + R0 = R2; +.Lreturn_r0: + RTS; + +.Lpower_of_two: + /* Y has a single bit set, which means it's a power of two. + ** That means we can perform the division just by shifting + ** X to the right the appropriate number of bits + */ + + /* signbits returns the number of sign bits, minus one. + ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need + ** to shift right n-signbits spaces. It also means 0x80000000 + ** is a special case, because that *also* gives a signbits of 0 + */ + + R2 = R0 >> 31; + CC = R1 < 0; + IF CC JUMP .Ltrue_return_ident; + + R1.l = SIGNBITS R1; + R1 = R1.L (Z); + R1 += -30; + R0 = LSHIFT R0 by R1.L; + RTS; + +/* METHOD 3: PRESCALE AND USE THE DIVIDE PRIMITIVES WITH SOME POST-CORRECTION + Two scaling operations are required to use the divide primitives with a + divisor > 0x7FFFF. + Firstly (as in method 1) we need to shift the dividend 1 to the left for + integer division. + Secondly we need to shift both the divisor and dividend 1 to the right so + both are in range for the primitives. + The left/right shift of the dividend does nothing so we can skip it. +*/ +.Lshift_and_correct: + R2 = R0; + // R3 is already R1 >> 1 + CC=!CC; + AQ = CC; /* Clear AQ, got here with CC = 0 */ + DIVQ(R2, R3); // 1 + DIVQ(R2, R3); // 2 + DIVQ(R2, R3); // 3 + DIVQ(R2, R3); // 4 + DIVQ(R2, R3); // 5 + DIVQ(R2, R3); // 6 + DIVQ(R2, R3); // 7 + DIVQ(R2, R3); // 8 + DIVQ(R2, R3); // 9 + DIVQ(R2, R3); // 10 + DIVQ(R2, R3); // 11 + DIVQ(R2, R3); // 12 + DIVQ(R2, R3); // 13 + DIVQ(R2, R3); // 14 + DIVQ(R2, R3); // 15 + DIVQ(R2, R3); // 16 + + /* According to the Instruction Set Reference: + To divide by a divisor > 0x7FFF, + 1. prescale and perform divide to obtain quotient (Q) (done above), + 2. multiply quotient by unscaled divisor (result M) + 3. subtract the product from the divident to get an error (E = X - M) + 4. if E < divisor (Y) subtract 1, if E > divisor (Y) add 1, else return quotient (Q) + */ + R3 = R2.L (Z); /* Q = X' / Y' */ + R2 = R3; /* Preserve Q */ + R2 *= R1; /* M = Q * Y */ + R2 = R0 - R2; /* E = X - M */ + R0 = R3; /* Copy Q into result reg */ + +/* Correction: If result of the multiply is negative, we overflowed + and need to correct the result by subtracting 1 from the result.*/ + R3 = 0xFFFF (Z); + R2 = R2 >> 16; /* E >> 16 */ + CC = R2 == R3; + R3 = 1 ; + R1 = R0 - R3; + IF CC R0 = R1; + RTS; diff --git a/arch/blackfin/lib/umodsi3.S b/arch/blackfin/lib/umodsi3.S new file mode 100644 index 0000000000..b55ce96ab8 --- /dev/null +++ b/arch/blackfin/lib/umodsi3.S @@ -0,0 +1,66 @@ +/* + * File: arch/blackfin/lib/umodsi3.S + * Based on: + * Author: + * + * Created: + * Description: libgcc1 routines for Blackfin 5xx + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifdef CONFIG_ARITHMETIC_OPS_L1 +.section .l1.text +#else +.text +#endif + +.extern ___udivsi3; +.globl ___umodsi3 +___umodsi3: + + CC=R0==0; + IF CC JUMP .LRETURN_R0; /* Return 0, if NR == 0 */ + CC= R1==0; + IF CC JUMP .LRETURN_ZERO_VAL; /* Return 0, if DR == 0 */ + CC=R0==R1; + IF CC JUMP .LRETURN_ZERO_VAL; /* Return 0, if NR == DR */ + CC = R1 == 1; + IF CC JUMP .LRETURN_ZERO_VAL; /* Return 0, if DR == 1 */ + CC = R0>= 16; + /* Unsigned multiplication has the nice property that we can + ignore carry on this first addition. */ + R0 = R0 + R3; + R0 = R0 + R1; + cc = ac0; + R1 = cc; + R1 = PACK(R1.l,R0.h); + R0 = R1 + R2; + RTS; diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig new file mode 100644 index 0000000000..14297b3ed5 --- /dev/null +++ b/arch/blackfin/mach-bf533/Kconfig @@ -0,0 +1,92 @@ +if (BF533 || BF532 || BF531) + +menu "BF533/2/1 Specific Configuration" + +comment "Interrupt Priority Assignment" +menu "Priority" + +config UART_ERROR + int "UART ERROR" + default 7 +config SPORT0_ERROR + int "SPORT0 ERROR" + default 7 +config SPI_ERROR + int "SPI ERROR" + default 7 +config SPORT1_ERROR + int "SPORT1 ERROR" + default 7 +config PPI_ERROR + int "PPI ERROR" + default 7 +config DMA_ERROR + int "DMA ERROR" + default 7 +config PLLWAKE_ERROR + int "PLL WAKEUP ERROR" + default 7 + +config RTC_ERROR + int "RTC ERROR" + default 8 +config DMA0_PPI + int "DMA0 PPI" + default 8 + +config DMA1_SPORT0RX + int "DMA1 (SPORT0 RX)" + default 9 +config DMA2_SPORT0TX + int "DMA2 (SPORT0 TX)" + default 9 +config DMA3_SPORT1RX + int "DMA3 (SPORT1 RX)" + default 9 +config DMA4_SPORT1TX + int "DMA4 (SPORT1 TX)" + default 9 +config DMA5_SPI + int "DMA5 (SPI)" + default 10 +config DMA6_UARTRX + int "DMA6 (UART0 RX)" + default 10 +config DMA7_UARTTX + int "DMA7 (UART0 TX)" + default 10 +config TIMER0 + int "TIMER0" + default 11 +config TIMER1 + int "TIMER1" + default 11 +config TIMER2 + int "TIMER2" + default 11 +config PFA + int "PF Interrupt A" + default 12 +config PFB + int "PF Interrupt B" + default 12 +config MEMDMA0 + int "MEMORY DMA0" + default 13 +config MEMDMA1 + int "MEMORY DMA1" + default 13 +config WDTIMER + int "WATCH DOG TIMER" + default 13 + + help + Enter the priority numbers between 7-13 ONLY. Others are Reserved. + This applies to all the above. It is not recommended to assign the + highest priority number 7 to UART or any other device. + +endmenu + +endmenu + +endif diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile new file mode 100644 index 0000000000..76d2c2b857 --- /dev/null +++ b/arch/blackfin/mach-bf533/Makefile @@ -0,0 +1,9 @@ +# +# arch/blackfin/mach-bf533/Makefile +# + +extra-y := head.o + +obj-y := ints-priority.o + +obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile new file mode 100644 index 0000000000..12a631ab38 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -0,0 +1,8 @@ +# +# arch/blackfin/mach-bf533/boards/Makefile +# + +obj-$(CONFIG_GENERIC_BOARD) += generic_board.o +obj-$(CONFIG_BFIN533_STAMP) += stamp.o +obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o +obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c new file mode 100644 index 0000000000..23a7f607df --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -0,0 +1,267 @@ +/* + * File: arch/blackfin/mach-bf533/boards/cm_bf533.c + * Based on: arch/blackfin/mach-bf533/boards/ezkit.c + * Author: Aidan Williams Copright 2005 + * + * Created: 2005 + * Description: Board description file + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "Bluetechnix CM BF533"; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + },{ + .name = "kernel", + .size = 0xe0000, + .offset = 0x20000 + },{ + .name = "file system", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; + +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + },{ + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 2, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .start = 0x20200300, + .end = 0x20200300 + 16, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20308000, + .end = 0x20308000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20308004, + .end = 0x20308004, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +static struct platform_device *cm_bf533_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif +}; + +static int __init cm_bf533_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + return 0; +} + +arch_initcall(cm_bf533_init); diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c new file mode 100644 index 0000000000..747298ea90 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -0,0 +1,224 @@ +/* + * File: arch/blackfin/mach-bf533/ezkit.c + * Based on: Orginal Work + * Author: Aidan Williams + * + * Created: 2005 + * Description: + * + * Modified: Robin Getz - Named the boards + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "ADDS-BF533-EZKIT"; + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +/* + * USB-LAN EzExtender board + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20310300, + .end = 0x20310300 + 16, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + },{ + .name = "kernel", + .size = 0xe0000, + .offset = 0x20000 + },{ + .name = "file system", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +static struct platform_device *ezkit_devices[] __initdata = { +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif +}; + +static int __init ezkit_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + return 0; +} + +arch_initcall(ezkit_init); diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c new file mode 100644 index 0000000000..c0f43ccfbf --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/generic_board.c @@ -0,0 +1,95 @@ +/* + * File: arch/blackfin/mach-bf533/generic_board.c + * Based on: arch/blackfin/mach-bf533/ezkit.c + * Author: Aidan Williams + * + * Created: 2005 + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "UNKNOWN BOARD"; + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PROG_INTB, + .end = IRQ_PROG_INTB, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + },{ + /* + * denotes the flag pin and is used directly if + * CONFIG_IRQCHIP_DEMUX_GPIO is defined. + */ + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +static struct platform_device *generic_board_devices[] __initdata = { +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif +}; + +static int __init generic_board_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); +} + +arch_initcall(generic_board_init); diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c new file mode 100644 index 0000000000..d7b3a5d74e --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -0,0 +1,321 @@ +/* + * File: arch/blackfin/mach-bf533/stamp.c + * Based on: arch/blackfin/mach-bf533/ezkit.c + * Author: Aidan Williams + * + * Created: 2005 + * Description: Board Info File for the BF533-STAMP + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include +#endif +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "ADDS-BF533-STAMP"; + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF10, + .end = IRQ_PF10, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + },{ + .name = "kernel", + .size = 0xe0000, + .offset = 0x20000 + },{ + .name = "file system", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x4, /* send zero */ + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + +#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) +static struct bfin5xx_spi_chip ad5304_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif + +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 3, + .controller_data= &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .controller_data= &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) + { + .modalias = "ad5304_spi", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .platform_data = NULL, + .controller_data = &ad5304_chip_info, + .mode = SPI_MODE_2, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +static struct platform_device bfin_fb_device = { + .name = "bf537-fb", +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +static struct platform_device *stamp_devices[] __initdata = { +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif +}; + +static int __init stamp_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + return 0; +} + +arch_initcall(stamp_init); diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c new file mode 100644 index 0000000000..99547c4c29 --- /dev/null +++ b/arch/blackfin/mach-bf533/cpu.c @@ -0,0 +1,161 @@ +/* + * File: arch/blackfin/mach-bf533/cpu.c + * Based on: + * Author: michael.kang@analog.com + * + * Created: + * Description: clock scaling for the bf533 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +/* CONFIG_CLKIN_HZ=11059200 */ +#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ +#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ +#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ +#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ +#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ +#define VCO(x) VCO##x + +#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} +/* frequency */ +static struct cpufreq_frequency_table bf533_freq_table[] = { + FREQ(1), + FREQ(3), + {VCO4, VCO4 / 2}, {VCO4, VCO4}, + FREQ(5), + {0, CPUFREQ_TABLE_END}, +}; + +/* + * dpmc_fops->ioctl() + * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) + */ +static int bf533_getfreq(unsigned int cpu) +{ + unsigned long cclk_mhz, vco_mhz; + + /* The driver only support single cpu */ + if (cpu == 0) + dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); + else + cclk_mhz = -1; + return cclk_mhz; +} + +static int bf533_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned long cclk_mhz; + unsigned long vco_mhz; + unsigned long flags; + unsigned int index, vco_index; + int i; + + struct cpufreq_freqs freqs; + if (cpufreq_frequency_table_target + (policy, bf533_freq_table, target_freq, relation, &index)) + return -EINVAL; + cclk_mhz = bf533_freq_table[index].frequency; + vco_mhz = bf533_freq_table[index].index; + + dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); + freqs.old = bf533_getfreq(0); + freqs.new = cclk_mhz; + freqs.cpu = 0; + + pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", + cclk_mhz, vco_mhz, index, target_freq, freqs.old); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + local_irq_save(flags); + dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); + local_irq_restore(flags); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + vco_mhz = get_vco(); + cclk_mhz = get_cclk(); + return 0; +} + +/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on + * this platform, anyway. + */ +static int bf533_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &bf533_freq_table); +} + +static int __init __bf533_cpu_init(struct cpufreq_policy *policy) +{ + int result; + + if (policy->cpu != 0) + return -EINVAL; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + /*Now ,only support one cpu */ + policy->cur = bf533_getfreq(0); + cpufreq_frequency_table_get_attr(bf533_freq_table, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, bf533_freq_table); +} + +static struct freq_attr *bf533_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver bf533_driver = { + .verify = bf533_verify_speed, + .target = bf533_target, + .get = bf533_getfreq, + .init = __bf533_cpu_init, + .name = "bf533", + .owner = THIS_MODULE, + .attr = bf533_freq_attr, +}; + +static int __init bf533_cpu_init(void) +{ + return cpufreq_register_driver(&bf533_driver); +} + +static void __exit bf533_cpu_exit(void) +{ + cpufreq_unregister_driver(&bf533_driver); +} + +MODULE_AUTHOR("Mickael Kang"); +MODULE_DESCRIPTION("cpufreq driver for BF533 CPU"); +MODULE_LICENSE("GPL"); + +module_init(bf533_cpu_init); +module_exit(bf533_cpu_exit); diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S new file mode 100644 index 0000000000..4808edb068 --- /dev/null +++ b/arch/blackfin/mach-bf533/head.S @@ -0,0 +1,774 @@ +/* + * File: arch/blackfin/mach-bf533/head.S + * Based on: + * Author: Jeff Dionne COPYRIGHT 1998 D. Jeff Dionne + * + * Created: 1998 + * Description: bf533 startup file + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#if CONFIG_BFIN_KERNEL_CLOCK +#include +#endif +#if CONFIG_DEBUG_KERNEL_START +#include +#endif + +.global __rambase +.global __ramstart +.global __ramend +.extern ___bss_stop +.extern ___bss_start +.extern _bf53x_relocate_l1_mem + +#define INITIAL_STACK 0xFFB01000 + +.text + +ENTRY(__start) +ENTRY(__stext) + /* R0: argument of command line string, passed from uboot, save it */ + R7 = R0; + /* Set the SYSCFG register */ + R0 = 0x36; + /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + SYSCFG = R0; + R0 = 0; + + /*Clear Out All the data and pointer Registers*/ + R1 = R0; + R2 = R0; + R3 = R0; + R4 = R0; + R5 = R0; + R6 = R0; + + P0 = R0; + P1 = R0; + P2 = R0; + P3 = R0; + P4 = R0; + P5 = R0; + + LC0 = r0; + LC1 = r0; + L0 = r0; + L1 = r0; + L2 = r0; + L3 = r0; + + /* Clear Out All the DAG Registers*/ + B0 = r0; + B1 = r0; + B2 = r0; + B3 = r0; + + I0 = r0; + I1 = r0; + I2 = r0; + I3 = r0; + + M0 = r0; + M1 = r0; + M2 = r0; + M3 = r0; + +#if CONFIG_DEBUG_KERNEL_START + +/* + * Set up a temporary Event Vector Table, so if something bad happens before + * the kernel is fully started, it doesn't vector off into the bootloaders + * table + */ + P0.l = lo(EVT2); + P0.h = hi(EVT2); + P1.l = lo(EVT15); + P1.h = hi(EVT15); + P2.l = debug_kernel_start_trap; + P2.h = debug_kernel_start_trap; + + RTS = P2; + RTI = P2; + RTX = P2; + RTN = P2; + RTE = P2; + +.Lfill_temp_vector_table: + [P0++] = P2; /* Core Event Vector Table */ + CC = P0 == P1; + if !CC JUMP .Lfill_temp_vector_table + P0 = r0; + P1 = r0; + P2 = r0; + +#endif + + p0.h = hi(FIO_MASKA_C); + p0.l = lo(FIO_MASKA_C); + r0 = 0xFFFF(Z); + w[p0] = r0.L; /* Disable all interrupts */ + ssync; + + p0.h = hi(FIO_MASKB_C); + p0.l = lo(FIO_MASKB_C); + r0 = 0xFFFF(Z); + w[p0] = r0.L; /* Disable all interrupts */ + ssync; + + /* Turn off the icache */ + p0.l = (IMEM_CONTROL & 0xFFFF); + p0.h = (IMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENICPLB; + R0 = R0 & R1; + + /* Anomaly 05000125 */ +#ifdef ANOMALY_05000125 + CLI R2; + SSYNC; +#endif + [p0] = R0; + SSYNC; +#ifdef ANOMALY_05000125 + STI R2; +#endif + + /* Turn off the dcache */ + p0.l = (DMEM_CONTROL & 0xFFFF); + p0.h = (DMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENDCPLB; + R0 = R0 & R1; + + /* Anomaly 05000125 */ +#ifdef ANOMALY_05000125 + CLI R2; + SSYNC; +#endif + [p0] = R0; + SSYNC; +#ifdef ANOMALY_05000125 + STI R2; +#endif + + /* Initialise UART */ + p0.h = hi(UART_LCR); + p0.l = lo(UART_LCR); + r0 = 0x0(Z); + w[p0] = r0.L; /* To enable DLL writes */ + ssync; + + p0.h = hi(UART_DLL); + p0.l = lo(UART_DLL); + r0 = 0x0(Z); + w[p0] = r0.L; + ssync; + + p0.h = hi(UART_DLH); + p0.l = lo(UART_DLH); + r0 = 0x00(Z); + w[p0] = r0.L; + ssync; + + p0.h = hi(UART_GCTL); + p0.l = lo(UART_GCTL); + r0 = 0x0(Z); + w[p0] = r0.L; /* To enable UART clock */ + ssync; + + /* Initialize stack pointer */ + sp.l = lo(INITIAL_STACK); + sp.h = hi(INITIAL_STACK); + fp = sp; + usp = sp; + + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ + call _bf53x_relocate_l1_mem; +#if CONFIG_BFIN_KERNEL_CLOCK + call _start_dma_code; +#endif + + /* Code for initializing Async memory banks */ + + p2.h = hi(EBIU_AMBCTL1); + p2.l = lo(EBIU_AMBCTL1); + r0.h = hi(AMBCTL1VAL); + r0.l = lo(AMBCTL1VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMBCTL0); + p2.l = lo(EBIU_AMBCTL0); + r0.h = hi(AMBCTL0VAL); + r0.l = lo(AMBCTL0VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMGCTL); + p2.l = lo(EBIU_AMGCTL); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* This section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* EVT15 = _real_start */ + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + csync; + + p0.l = lo(IMASK); + p0.h = hi(IMASK); + p1.l = IMASK_IVG15; + p1.h = 0x0; + [p0] = p1; + csync; + + raise 15; + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; + reti = p0; +#if defined(ANOMALY_05000281) + nop; nop; nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; + +ENTRY(_real_start) + [ -- sp ] = reti; + p0.l = lo(WDOG_CTL); + p0.h = hi(WDOG_CTL); + r0 = 0xAD6(z); + w[p0] = r0; /* watchdog off for now */ + ssync; + + /* Code update for BSS size == 0 + * Zero out the bss region. + */ + + p1.l = ___bss_start; + p1.h = ___bss_start; + p2.l = ___bss_stop; + p2.h = ___bss_stop; + r0 = 0; + p2 -= p1; + lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; +.L_clear_bss: + B[p1++] = r0; + + /* In case there is a NULL pointer reference + * Zero out region before stext + */ + + p1.l = 0x0; + p1.h = 0x0; + r0.l = __stext; + r0.h = __stext; + r0 = r0 >> 1; + p2 = r0; + r0 = 0; + lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; +.L_clear_zero: + W[p1++] = r0; + +/* pass the uboot arguments to the global value command line */ + R0 = R7; + call _cmdline_init; + + p1.l = __rambase; + p1.h = __rambase; + r0.l = __sdata; + r0.h = __sdata; + [p1] = r0; + + p1.l = __ramstart; + p1.h = __ramstart; + p3.l = ___bss_stop; + p3.h = ___bss_stop; + + r1 = p3; + [p1] = r1; + + /* + * load the current thread pointer and stack + */ + r1.l = _init_thread_union; + r1.h = _init_thread_union; + + r2.l = 0x2000; + r2.h = 0x0000; + r1 = r1 + r2; + sp = r1; + usp = sp; + fp = sp; + call _start_kernel; +.L_exit: + jump.s .L_exit; + +.section .l1.text +#if CONFIG_BFIN_KERNEL_CLOCK +ENTRY(_start_dma_code) + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + r0.h = 0x0; + [p0] = r0; + SSYNC; + + /* + * Set PLL_CTL + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +.Lcheck_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump .Lcheck_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump .Lskip; + NOP; + BITSET (R0, 23); +.Lskip: + [P2] = R0; + SSYNC; + + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + R1 = [p2]; + R1 = R1 | R0; + [P2] = R1; + SSYNC; + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = lo(IWR_ENABLE_ALL) + r0.h = hi(IWR_ENABLE_ALL) + [p0] = r0; + SSYNC; + + RTS; +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +ENTRY(_bfin_reset) + /* No more interrupts to be handled*/ + CLI R6; + SSYNC; + +#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) + p0.h = hi(FIO_INEN); + p0.l = lo(FIO_INEN); + r0.l = ~(1 << CONFIG_ENET_FLASH_PIN); + w[p0] = r0.l; + + p0.h = hi(FIO_DIR); + p0.l = lo(FIO_DIR); + r0.l = (1 << CONFIG_ENET_FLASH_PIN); + w[p0] = r0.l; + + p0.h = hi(FIO_FLAG_C); + p0.l = lo(FIO_FLAG_C); + r0.l = (1 << CONFIG_ENET_FLASH_PIN); + w[p0] = r0.l; +#endif + + /* Clear the bits 13-15 in SWRST if they werent cleared */ + p0.h = hi(SWRST); + p0.l = lo(SWRST); + csync; + r0.l = w[p0]; + + /* Clear the IMASK register */ + p0.h = hi(IMASK); + p0.l = lo(IMASK); + r0 = 0x0; + [p0] = r0; + + /* Clear the ILAT register */ + p0.h = hi(ILAT); + p0.l = lo(ILAT); + r0 = [p0]; + [p0] = r0; + SSYNC; + + /* Disable the WDOG TIMER */ + p0.h = hi(WDOG_CTL); + p0.l = lo(WDOG_CTL); + r0.l = 0xAD6; + w[p0] = r0.l; + SSYNC; + + /* Clear the sticky bit incase it is already set */ + p0.h = hi(WDOG_CTL); + p0.l = lo(WDOG_CTL); + r0.l = 0x8AD6; + w[p0] = r0.l; + SSYNC; + + /* Program the count value */ + R0.l = 0x100; + R0.h = 0x0; + P0.h = hi(WDOG_CNT); + P0.l = lo(WDOG_CNT); + [P0] = R0; + SSYNC; + + /* Program WDOG_STAT if necessary */ + P0.h = hi(WDOG_CTL); + P0.l = lo(WDOG_CTL); + R0 = W[P0](Z); + CC = BITTST(R0,1); + if !CC JUMP .LWRITESTAT; + CC = BITTST(R0,2); + if !CC JUMP .LWRITESTAT; + JUMP .LSKIP_WRITE; + +.LWRITESTAT: + /* When watch dog timer is enabled, a write to STAT will load the contents of CNT to STAT */ + R0 = 0x0000(z); + P0.h = hi(WDOG_STAT); + P0.l = lo(WDOG_STAT) + [P0] = R0; + SSYNC; + +.LSKIP_WRITE: + /* Enable the reset event */ + P0.h = hi(WDOG_CTL); + P0.l = lo(WDOG_CTL); + R0 = W[P0](Z); + BITCLR(R0,1); + BITCLR(R0,2); + W[P0] = R0.L; + SSYNC; + NOP; + + /* Enable the wdog counter */ + R0 = W[P0](Z); + BITCLR(R0,4); + W[P0] = R0.L; + SSYNC; + + IDLE; + + RTS; + +#if CONFIG_DEBUG_KERNEL_START +debug_kernel_start_trap: + /* Set up a temp stack in L1 - SDRAM might not be working */ + P0.L = lo(L1_DATA_A_START + 0x100); + P0.H = hi(L1_DATA_A_START + 0x100); + SP = P0; + + /* Make sure the Clocks are the way I think they should be */ + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +.Lcheck_again1: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump .Lcheck_again1; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + /* Make sure UART is enabled - you can never be sure */ + +/* + * Setup for console. Argument comes from the menuconfig + */ + +#ifdef CONFIG_BAUD_9600 +#define CONSOLE_BAUD_RATE 9600 +#elif CONFIG_BAUD_19200 +#define CONSOLE_BAUD_RATE 19200 +#elif CONFIG_BAUD_38400 +#define CONSOLE_BAUD_RATE 38400 +#elif CONFIG_BAUD_57600 +#define CONSOLE_BAUD_RATE 57600 +#elif CONFIG_BAUD_115200 +#define CONSOLE_BAUD_RATE 115200 +#endif + + p0.h = hi(UART_GCTL); + p0.l = lo(UART_GCTL); + r0 = 0x00(Z); + w[p0] = r0.L; /* To Turn off UART clocks */ + ssync; + + p0.h = hi(UART_LCR); + p0.l = lo(UART_LCR); + r0 = 0x83(Z); + w[p0] = r0.L; /* To enable DLL writes */ + ssync; + + R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16)); + + p0.h = hi(UART_DLL); + p0.l = lo(UART_DLL); + r0 = 0xFF(Z); + r0 = R1 & R0; + w[p0] = r0.L; + ssync; + + p0.h = hi(UART_DLH); + p0.l = lo(UART_DLH); + r1 >>= 8 ; + w[p0] = r1.L; + ssync; + + p0.h = hi(UART_GCTL); + p0.l = lo(UART_GCTL); + r0 = 0x0(Z); + w[p0] = r0.L; /* To enable UART clock */ + ssync; + + p0.h = hi(UART_LCR); + p0.l = lo(UART_LCR); + r0 = 0x03(Z); + w[p0] = r0.L; /* To Turn on UART */ + ssync; + + p0.h = hi(UART_GCTL); + p0.l = lo(UART_GCTL); + r0 = 0x01(Z); + w[p0] = r0.L; /* To Turn on UART Clocks */ + ssync; + + P0.h = hi(UART_THR); + P0.l = lo(UART_THR); + P1.h = hi(UART_LSR); + P1.l = lo(UART_LSR); + + R0.L = 'K'; + call .Lwait_char; + R0.L='e'; + call .Lwait_char; + R0.L='r'; + call .Lwait_char; + R0.L='n' + call .Lwait_char; + R0.L='e' + call .Lwait_char; + R0.L='l'; + call .Lwait_char; + R0.L=' '; + call .Lwait_char; + R0.L='c'; + call .Lwait_char; + R0.L='r'; + call .Lwait_char; + R0.L='a'; + call .Lwait_char; + R0.L='s'; + call .Lwait_char; + R0.L='h'; + call .Lwait_char; + R0.L='\r'; + call .Lwait_char; + R0.L='\n'; + call .Lwait_char; + + R0.L='S'; + call .Lwait_char; + R0.L='E'; + call .Lwait_char; + R0.L='Q' + call .Lwait_char; + R0.L='S' + call .Lwait_char; + R0.L='T'; + call .Lwait_char; + R0.L='A'; + call .Lwait_char; + R0.L='T'; + call .Lwait_char; + R0.L='='; + call .Lwait_char; + R2 = SEQSTAT; + call .Ldump_reg; + + R0.L=' '; + call .Lwait_char; + R0.L='R'; + call .Lwait_char; + R0.L='E' + call .Lwait_char; + R0.L='T' + call .Lwait_char; + R0.L='X'; + call .Lwait_char; + R0.L='='; + call .Lwait_char; + R2 = RETX; + call .Ldump_reg; + + R0.L='\r'; + call .Lwait_char; + R0.L='\n'; + call .Lwait_char; + +.Ldebug_kernel_start_trap_done: + JUMP .Ldebug_kernel_start_trap_done; +.Ldump_reg: + R3 = 32; + R4 = 0x0F; + R5 = ':'; /* one past 9 */ + +.Ldump_reg2: + R0 = R2; + R3 += -4; + R0 >>>= R3; + R0 = R0 & R4; + R0 += 0x30; + CC = R0 <= R5; + if CC JUMP .Ldump_reg1; + R0 += 7; + +.Ldump_reg1: + R1.l = W[P1]; + CC = BITTST(R1, 5); + if !CC JUMP .Ldump_reg1; + W[P0] = r0; + + CC = R3 == 0; + if !CC JUMP .Ldump_reg2 + RTS; + +.Lwait_char: + R1.l = W[P1]; + CC = BITTST(R1, 5); + if !CC JUMP .Lwait_char; + W[P0] = r0; + RTS; + +#endif /* CONFIG_DEBUG_KERNEL_START */ + +.data + +/* + * Set up the usable of RAM stuff. Size of RAM is determined then + * an initial stack set up at the end. + */ + +.align 4 +__rambase: +.long 0 +__ramstart: +.long 0 +__ramend: +.long 0 diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c new file mode 100644 index 0000000000..36a6933452 --- /dev/null +++ b/arch/blackfin/mach-bf533/ints-priority.c @@ -0,0 +1,65 @@ +/* + * File: arch/blackfin/mach-bf533/ints-priority.c + * Based on: + * Author: Michael Hennerich + * + * Created: ? + * Description: Set up the interupt priorities + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +void program_IAR(void) +{ + /* Program the IAR0 Register with the configured priority */ + bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) | + ((CONFIG_DMA_ERROR - 7) << DMA_ERROR_POS) | + ((CONFIG_PPI_ERROR - 7) << PPI_ERROR_POS) | + ((CONFIG_SPORT0_ERROR - 7) << SPORT0_ERROR_POS) | + ((CONFIG_SPI_ERROR - 7) << SPI_ERROR_POS) | + ((CONFIG_SPORT1_ERROR - 7) << SPORT1_ERROR_POS) | + ((CONFIG_UART_ERROR - 7) << UART_ERROR_POS) | + ((CONFIG_RTC_ERROR - 7) << RTC_ERROR_POS)); + + bfin_write_SIC_IAR1(((CONFIG_DMA0_PPI - 7) << DMA0_PPI_POS) | + ((CONFIG_DMA1_SPORT0RX - 7) << DMA1_SPORT0RX_POS) | + ((CONFIG_DMA2_SPORT0TX - 7) << DMA2_SPORT0TX_POS) | + ((CONFIG_DMA3_SPORT1RX - 7) << DMA3_SPORT1RX_POS) | + ((CONFIG_DMA4_SPORT1TX - 7) << DMA4_SPORT1TX_POS) | + ((CONFIG_DMA5_SPI - 7) << DMA5_SPI_POS) | + ((CONFIG_DMA6_UARTRX - 7) << DMA6_UARTRX_POS) | + ((CONFIG_DMA7_UARTTX - 7) << DMA7_UARTTX_POS)); + + bfin_write_SIC_IAR2(((CONFIG_TIMER0 - 7) << TIMER0_POS) | + ((CONFIG_TIMER1 - 7) << TIMER1_POS) | + ((CONFIG_TIMER2 - 7) << TIMER2_POS) | + ((CONFIG_PFA - 7) << PFA_POS) | + ((CONFIG_PFB - 7) << PFB_POS) | + ((CONFIG_MEMDMA0 - 7) << MEMDMA0_POS) | + ((CONFIG_MEMDMA1 - 7) << MEMDMA1_POS) | + ((CONFIG_WDTIMER - 7) << WDTIMER_POS)); + + SSYNC(); +} diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig new file mode 100644 index 0000000000..cc9ae38a4d --- /dev/null +++ b/arch/blackfin/mach-bf537/Kconfig @@ -0,0 +1,141 @@ +if (BF537 || BF534 || BF536) + +menu "BF537 Specific Configuration" + +comment "PORT F/G Selection" +choice + prompt "Select BF537/6/4 default GPIO PFx PORTx" + help + Quick Hack for BF537/6/4 default GPIO PFx PORTF. + +config BF537_PORT_F + bool "Select BF537/6/4 default GPIO PFx PORTF" + depends on (BF537 || BF536 || BF534) + help + Quick Hack for BF537/6/4 default GPIO PFx PORTF. + +config BF537_PORT_G + bool "Select BF537/6/4 default GPIO PFx PORTG" + depends on (BF537 || BF536 || BF534) + help + Quick Hack for BF537/6/4 default GPIO PFx PORTG. + +config BF537_PORT_H + bool "Select BF537/6/4 default GPIO PFx PORTH" + depends on (BF537 || BF536 || BF534) + help + Quick Hack for BF537/6/4 default GPIO PFx PORTH + Use only when Blackfin EMAC support is not required. + +endchoice + +comment "Interrupt Priority Assignment" +menu "Priority" + +config IRQ_PLL_WAKEUP + int "IRQ_PLL_WAKEUP" + default 7 +config IRQ_DMA_ERROR + int "IRQ_DMA_ERROR Generic" + default 7 +config IRQ_ERROR + int "IRQ_ERROR: CAN MAC SPORT0 SPORT1 SPI UART0 UART1" + default 7 +config IRQ_RTC + int "IRQ_RTC" + default 8 +config IRQ_PPI + int "IRQ_PPI" + default 8 +config IRQ_SPORT0_RX + int "IRQ_SPORT0_RX" + default 9 +config IRQ_SPORT0_TX + int "IRQ_SPORT0_TX" + default 9 +config IRQ_SPORT1_RX + int "IRQ_SPORT1_RX" + default 9 +config IRQ_SPORT1_TX + int "IRQ_SPORT1_TX" + default 9 +config IRQ_TWI + int "IRQ_TWI" + default 10 +config IRQ_SPI + int "IRQ_SPI" + default 10 +config IRQ_UART0_RX + int "IRQ_UART0_RX" + default 10 +config IRQ_UART0_TX + int "IRQ_UART0_TX" + default 10 +config IRQ_UART1_RX + int "IRQ_UART1_RX" + default 10 +config IRQ_UART1_TX + int "IRQ_UART1_TX" + default 10 +config IRQ_CAN_RX + int "IRQ_CAN_RX" + default 11 +config IRQ_CAN_TX + int "IRQ_CAN_TX" + default 11 +config IRQ_MAC_RX + int "IRQ_MAC_RX" + default 11 +config IRQ_MAC_TX + int "IRQ_MAC_TX" + default 11 +config IRQ_TMR0 + int "IRQ_TMR0" + default 12 +config IRQ_TMR1 + int "IRQ_TMR1" + default 12 +config IRQ_TMR2 + int "IRQ_TMR2" + default 12 +config IRQ_TMR3 + int "IRQ_TMR3" + default 12 +config IRQ_TMR4 + int "IRQ_TMR4" + default 12 +config IRQ_TMR5 + int "IRQ_TMR5" + default 12 +config IRQ_TMR6 + int "IRQ_TMR6" + default 12 +config IRQ_TMR7 + int "IRQ_TMR7" + default 12 +config IRQ_PROG_INTA + int "IRQ_PROG_INTA" + default 12 +config IRQ_PORTG_INTB + int "IRQ_PORTG_INTB" + default 12 +config IRQ_MEM_DMA0 + int "IRQ_MEM_DMA0" + default 13 +config IRQ_MEM_DMA1 + int "IRQ_MEM_DMA1" + default 13 +config IRQ_WATCH + int "IRQ_WATCH" + default 13 + + help + Enter the priority numbers between 7-13 ONLY. Others are Reserved. + This applies to all the above. It is not recommended to assign the + highest priority number 7 to UART or any other device. + +endmenu + +endmenu + +endif diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile new file mode 100644 index 0000000000..f32d44215b --- /dev/null +++ b/arch/blackfin/mach-bf537/Makefile @@ -0,0 +1,9 @@ +# +# arch/blackfin/mach-bf537/Makefile +# + +extra-y := head.o + +obj-y := ints-priority.o + +obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile new file mode 100644 index 0000000000..23323cacc3 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -0,0 +1,9 @@ +# +# arch/blackfin/mach-bf537/boards/Makefile +# + +obj-y += eth_mac.o +obj-$(CONFIG_GENERIC_BOARD) += generic_board.o +obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o +obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o +obj-$(CONFIG_PNAV10) += pnav10.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c new file mode 100644 index 0000000000..6a60618a78 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -0,0 +1,364 @@ +/* + * File: arch/blackfin/mach-bf537/boards/cm_bf537.c + * Based on: arch/blackfin/mach-bf533/boards/ezkit.c + * Author: Aidan Williams + * + * Created: 2005 + * Description: Board description file + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "Bluetechnix CM BF537"; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + },{ + .name = "kernel", + .size = 0xe0000, + .offset = 0x20000 + },{ + .name = "file system", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 7, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .start = 0x20200300, + .end = 0x20200300 + 16, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF14, + .end = IRQ_PF14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20308000, + .end = 0x20308000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20308004, + .end = 0x20308004, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PG15, + .end = IRQ_PG15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20200000, + .end = 0x20200000 + 0x100, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + },{ + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +static struct platform_device *cm_bf537_devices[] __initdata = { +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif +}; + +static int __init cm_bf537_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + return 0; +} + +arch_initcall(cm_bf537_init); diff --git a/arch/blackfin/mach-bf537/boards/eth_mac.c b/arch/blackfin/mach-bf537/boards/eth_mac.c new file mode 100644 index 0000000000..e129a08d63 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/eth_mac.c @@ -0,0 +1,51 @@ +/* + * arch/blackfin/mach-bf537/board/eth_mac.c + * + * Copyright (C) 2007 Analog Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include + +#if defined(CONFIG_GENERIC_BOARD) \ + || defined(CONFIG_BFIN537_STAMP) + +/* + * Currently the MAC address is saved in Flash by U-Boot + */ +#define FLASH_MAC 0x203f0000 + +void get_bf537_ether_addr(char *addr) +{ + unsigned int flash_mac = (unsigned int) FLASH_MAC; + *(u32 *)(&(addr[0])) = bfin_read32(flash_mac); + flash_mac += 4; + *(u16 *)(&(addr[4])) = bfin_read16(flash_mac); +} + +#else + +/* + * Provide MAC address function for other specific board setting + */ +void get_bf537_ether_addr(char *addr) +{ + printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n",__FILE__); +} + +#endif + +EXPORT_SYMBOL(get_bf537_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c new file mode 100644 index 0000000000..9019c0edbe --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -0,0 +1,445 @@ +/* + * File: arch/blackfin/mach-bf537/boards/generic_board.c + * Based on: arch/blackfin/mach-bf533/boards/ezkit.c + * Author: Aidan Williams + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "UNKNOWN BOARD"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20311000, /* Attribute Memeory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PROG_INTA, + .end = IRQ_PROG_INTA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + },{ + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + },{ + .start = 6, /* Card Detect PF6 */ + .end = 6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PROG_INTB, + .end = IRQ_PROG_INTB, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + },{ + /* + * denotes the flag pin and is used directly if + * CONFIG_IRQCHIP_DEMUX_GPIO is defined. + */ + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +static struct resource sl811_hcd_resources[] = { + { + .start = 0x20340000, + .end = 0x20340000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20340004, + .end = 0x20340004, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PROG_INTA, + .end = IRQ_PROG_INTA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + },{ + .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, + .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) +void sl811_port_power(struct device *dev, int is_on) +{ + unsigned short mask = (1< +#include + +/* All functions in this file save the registers they uses. + So there is no need to save any registers before calling them. */ + + .text; + +/* Initialize LEDs. */ + +ENTRY(_led_init) + LINK 12; + [--SP] = P0; + [--SP] = R0; + [--SP] = R1; + [--SP] = R2; + R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z); + R2 = ~R1; + + P0.H = hi(PORTF_FER); + P0.L = lo(PORTF_FER); + R0 = W[P0](Z); + SSYNC; + R0 = R0 & R2; + W[P0] = R0.L; + SSYNC; + + P0.H = hi(PORTFIO_DIR); + P0.L = lo(PORTFIO_DIR); + R0 = W[P0](Z); + SSYNC; + R0 = R0 | R1; + W[P0] = R0.L; + SSYNC; + + P0.H = hi(PORTFIO_INEN); + P0.L = lo(PORTFIO_INEN); + R0 = W[P0](Z); + SSYNC; + R0 = R0 & R2; + W[P0] = R0.L; + SSYNC; + + R2 = [SP++]; + R1 = [SP++]; + R0 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_init, .-_led_init + +/* Set one LED on. Leave other LEDs unchanged. + It expects the LED number passed through R0. */ + +ENTRY(_led_on) + LINK 12; + [--SP] = P0; + [--SP] = R1; + CALL _led_init; + R1 = 1; + R0 += 5; + R1 <<= R0; + P0.H = hi(PORTFIO); + P0.L = lo(PORTFIO); + R0 = W[P0](Z); + SSYNC; + R0 = R0 | R1; + W[P0] = R0.L; + SSYNC; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_on, .-_led_on + +/* Set one LED off. Leave other LEDs unchanged. */ + +ENTRY(_led_off) + LINK 12; + [--SP] = P0; + [--SP] = R1; + CALL _led_init; + R1 = 1; + R0 += 5; + R1 <<= R0; + R1 = ~R1; + P0.H = hi(PORTFIO); + P0.L = lo(PORTFIO); + R0 = W[P0](Z); + SSYNC; + R0 = R0 & R1; + W[P0] = R0.L; + SSYNC; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_off, .-_led_off + +/* Toggle one LED. Leave other LEDs unchanged. */ + +ENTRY(_led_toggle) + LINK 12; + [--SP] = P0; + [--SP] = R1; + CALL _led_init; + R1 = 1; + R0 += 5; + R1 <<= R0; + P0.H = hi(PORTFIO); + P0.L = lo(PORTFIO); + R0 = W[P0](Z); + SSYNC; + R0 = R0 ^ R1; + W[P0] = R0.L; + SSYNC; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_toggle, .-_led_toggle + +/* Display the number using LEDs in binary format. */ + +ENTRY(_led_disp_num) + LINK 12; + [--SP] = P0; + [--SP] = R1; + [--SP] = R2; + CALL _led_init; + R1 = 0x3f(X); + R0 = R0 & R1; + R2 = 6(X); + R0 <<= R2; + R1 <<= R2; + P0.H = hi(PORTFIO); + P0.L = lo(PORTFIO); + R2 = W[P0](Z); + SSYNC; + R1 = ~R1; + R2 = R2 & R1; + R2 = R2 | R0; + W[P0] = R2.L; + SSYNC; + R2 = [SP++]; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_disp_num, .-_led_disp_num + +/* Toggle the number using LEDs in binary format. */ + +ENTRY(_led_toggle_num) + LINK 12; + [--SP] = P0; + [--SP] = R1; + [--SP] = R2; + CALL _led_init; + R1 = 0x3f(X); + R0 = R0 & R1; + R1 = 6(X); + R0 <<= R1; + P0.H = hi(PORTFIO); + P0.L = lo(PORTFIO); + R1 = W[P0](Z); + SSYNC; + R1 = R1 ^ R0; + W[P0] = R1.L; + SSYNC; + R2 = [SP++]; + R1 = [SP++]; + P0 = [SP++]; + UNLINK; + RTS; + .size _led_toggle_num, .-_led_toggle_num + diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c new file mode 100644 index 0000000000..40d3a1b70e --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -0,0 +1,523 @@ +/* + * File: arch/blackfin/mach-bf537/boards/stamp.c + * Based on: arch/blackfin/mach-bf533/boards/ezkit.c + * Author: Aidan Williams + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include +#endif +#include +#include +#include + +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "PNAV-1.0"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20311000, /* Attribute Memeory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + },{ + .start = 6, /* Card Detect PF6 */ + .end = 6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + },{ + + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +static struct resource sl811_hcd_resources[] = { + { + .start = 0x20340000, + .end = 0x20340000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20340004, + .end = 0x20340004, + .flags = IORESOURCE_MEM, + },{ + .start = CONFIG_USB_SL811_BFIN_IRQ, + .end = CONFIG_USB_SL811_BFIN_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) +void sl811_port_power(struct device *dev, int is_on) +{ + unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); + + bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + + if (is_on) + bfin_write_FIO_FLAG_S(mask); + else + bfin_write_FIO_FLAG_C(mask); +} +#endif + +static struct sl811_platform_data sl811_priv = { + .potpg = 10, + .power = 250, /* == 500mA */ +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) + .port_power = &sl811_port_power, +#endif +}; + +static struct platform_device sl811_hcd_device = { + .name = "sl811-hcd", + .id = 0, + .dev = { + .platform_data = &sl811_priv, + }, + .num_resources = ARRAY_SIZE(sl811_hcd_resources), + .resource = sl811_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20360000, + .end = 0x20360000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20360004, + .end = 0x20360004, + .flags = IORESOURCE_MEM, + },{ + .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + },{ + .name = "kernel", + .size = 0xe0000, + .offset = 0x20000 + },{ + .name = "file system", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x4, /* send zero */ + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .cs_change_per_word = 1, + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 7, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 3, + .controller_data= &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .controller_data= &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +{ + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF2, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 5, + .controller_data = &spi_ad7877_chip_info, +}, +#endif + +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +static struct platform_device bfin_fb_device = { + .name = "bf537-fb", +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + },{ + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + + +static struct platform_device *stamp_devices[] __initdata = { +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) + &bfin_pcmcia_cf_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) + &sl811_hcd_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif + +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) + &bfin_fb_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif +}; + +static int __init stamp_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + return 0; +} + +arch_initcall(stamp_init); diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c new file mode 100644 index 0000000000..ba2f875a7f --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -0,0 +1,615 @@ +/* + * File: arch/blackfin/mach-bf537/boards/stamp.c + * Based on: arch/blackfin/mach-bf533/boards/ezkit.c + * Author: Aidan Williams + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include +#endif +#include +#include +#include +#include +#include + +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "ADDS-BF537-STAMP"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#define ISP1761_BASE 0x203C0000 +#define ISP1761_IRQ IRQ_PF7 + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = ISP1761_BASE + 0x00000000, + .end = ISP1761_BASE + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ISP1761_IRQ, + .end = ISP1761_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} + +arch_initcall(bfin_isp1761_init); +#endif + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20311000, /* Attribute Memeory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + },{ + .start = 6, /* Card Detect PF6 */ + .end = 6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + },{ + + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +static struct resource sl811_hcd_resources[] = { + { + .start = 0x20340000, + .end = 0x20340000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20340004, + .end = 0x20340004, + .flags = IORESOURCE_MEM, + },{ + .start = CONFIG_USB_SL811_BFIN_IRQ, + .end = CONFIG_USB_SL811_BFIN_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) +void sl811_port_power(struct device *dev, int is_on) +{ + unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); + + bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + + if (is_on) + bfin_write_FIO_FLAG_S(mask); + else + bfin_write_FIO_FLAG_C(mask); +} +#endif + +static struct sl811_platform_data sl811_priv = { + .potpg = 10, + .power = 250, /* == 500mA */ +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) + .port_power = &sl811_port_power, +#endif +}; + +static struct platform_device sl811_hcd_device = { + .name = "sl811-hcd", + .id = 0, + .dev = { + .platform_data = &sl811_priv, + }, + .num_resources = ARRAY_SIZE(sl811_hcd_resources), + .resource = sl811_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20360000, + .end = 0x20360000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x20360004, + .end = 0x20360004, + .flags = IORESOURCE_MEM, + },{ + .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + },{ + .name = "kernel", + .size = 0xe0000, + .offset = 0x20000 + },{ + .name = "file system", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x4, /* send zero */ + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + +#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) +static struct bfin5xx_spi_chip ad5304_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { +// .cs_change_per_word = 1, + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 3, + .controller_data= &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .controller_data= &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) + { + .modalias = "ad5304_spi", + .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .platform_data = NULL, + .controller_data = &ad5304_chip_info, + .mode = SPI_MODE_2, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF6, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .controller_data = &spi_ad7877_chip_info, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +static struct platform_device bfin_fb_device = { + .name = "bf537-fb", +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + },{ + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +static struct platform_device *stamp_devices[] __initdata = { +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) + &bfin_pcmcia_cf_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) + &sl811_hcd_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif + +#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) + &bfin_fb_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif +}; + +static int __init stamp_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + return 0; +} + +arch_initcall(stamp_init); diff --git a/arch/blackfin/mach-bf537/cpu.c b/arch/blackfin/mach-bf537/cpu.c new file mode 100644 index 0000000000..2d83b7e354 --- /dev/null +++ b/arch/blackfin/mach-bf537/cpu.c @@ -0,0 +1,161 @@ +/* + * File: arch/blackfin/mach-bf537/cpu.c + * Based on: + * Author: michael.kang@analog.com + * + * Created: + * Description: clock scaling for the bf537 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +/* CONFIG_CLKIN_HZ=11059200 */ +#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ +#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ +#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ +#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ +#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ +#define VCO(x) VCO##x + +#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} +/* frequency */ +static struct cpufreq_frequency_table bf537_freq_table[] = { + FREQ(1), + FREQ(3), + {VCO4, VCO4 / 2}, {VCO4, VCO4}, + FREQ(5), + {0, CPUFREQ_TABLE_END}, +}; + +/* + * dpmc_fops->ioctl() + * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) + */ +static int bf537_getfreq(unsigned int cpu) +{ + unsigned long cclk_mhz, vco_mhz; + + /* The driver only support single cpu */ + if (cpu == 0) + dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); + else + cclk_mhz = -1; + return cclk_mhz; +} + +static int bf537_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned long cclk_mhz; + unsigned long vco_mhz; + unsigned long flags; + unsigned int index, vco_index; + int i; + + struct cpufreq_freqs freqs; + if (cpufreq_frequency_table_target + (policy, bf537_freq_table, target_freq, relation, &index)) + return -EINVAL; + cclk_mhz = bf537_freq_table[index].frequency; + vco_mhz = bf537_freq_table[index].index; + + dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); + freqs.old = bf537_getfreq(0); + freqs.new = cclk_mhz; + freqs.cpu = 0; + + pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", + cclk_mhz, vco_mhz, index, target_freq, freqs.old); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + local_irq_save(flags); + dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); + local_irq_restore(flags); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + vco_mhz = get_vco(); + cclk_mhz = get_cclk(); + return 0; +} + +/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on + * this platform, anyway. + */ +static int bf537_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &bf537_freq_table); +} + +static int __init __bf537_cpu_init(struct cpufreq_policy *policy) +{ + int result; + + if (policy->cpu != 0) + return -EINVAL; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + /*Now ,only support one cpu */ + policy->cur = bf537_getfreq(0); + cpufreq_frequency_table_get_attr(bf537_freq_table, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, bf537_freq_table); +} + +static struct freq_attr *bf537_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver bf537_driver = { + .verify = bf537_verify_speed, + .target = bf537_target, + .get = bf537_getfreq, + .init = __bf537_cpu_init, + .name = "bf537", + .owner = THIS_MODULE, + .attr = bf537_freq_attr, +}; + +static int __init bf537_cpu_init(void) +{ + return cpufreq_register_driver(&bf537_driver); +} + +static void __exit bf537_cpu_exit(void) +{ + cpufreq_unregister_driver(&bf537_driver); +} + +MODULE_AUTHOR("Mickael Kang"); +MODULE_DESCRIPTION("cpufreq driver for BF537 CPU"); +MODULE_LICENSE("GPL"); + +module_init(bf537_cpu_init); +module_exit(bf537_cpu_exit); diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S new file mode 100644 index 0000000000..d104e1d8e0 --- /dev/null +++ b/arch/blackfin/mach-bf537/head.S @@ -0,0 +1,602 @@ +/* + * File: arch/blackfin/mach-bf537/head.S + * Based on: arch/blackfin/mach-bf533/head.S + * Author: Jeff Dionne COPYRIGHT 1998 D. Jeff Dionne + * + * Created: 1998 + * Description: Startup code for Blackfin BF537 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#if CONFIG_BFIN_KERNEL_CLOCK +#include +#endif + +.global __rambase +.global __ramstart +.global __ramend +.extern ___bss_stop +.extern ___bss_start +.extern _bf53x_relocate_l1_mem + +#define INITIAL_STACK 0xFFB01000 + +.text + +ENTRY(__start) +ENTRY(__stext) + /* R0: argument of command line string, passed from uboot, save it */ + R7 = R0; + /* Set the SYSCFG register */ + R0 = 0x36; + SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + R0 = 0; + + /* Clear Out All the data and pointer Registers*/ + R1 = R0; + R2 = R0; + R3 = R0; + R4 = R0; + R5 = R0; + R6 = R0; + + P0 = R0; + P1 = R0; + P2 = R0; + P3 = R0; + P4 = R0; + P5 = R0; + + LC0 = r0; + LC1 = r0; + L0 = r0; + L1 = r0; + L2 = r0; + L3 = r0; + + /* Clear Out All the DAG Registers*/ + B0 = r0; + B1 = r0; + B2 = r0; + B3 = r0; + + I0 = r0; + I1 = r0; + I2 = r0; + I3 = r0; + + M0 = r0; + M1 = r0; + M2 = r0; + M3 = r0; + + /* Turn off the icache */ + p0.l = (IMEM_CONTROL & 0xFFFF); + p0.h = (IMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENICPLB; + R0 = R0 & R1; + + /* Anomaly 05000125 */ +#ifdef ANOMALY_05000125 + CLI R2; + SSYNC; +#endif + [p0] = R0; + SSYNC; +#ifdef ANOMALY_05000125 + STI R2; +#endif + + /* Turn off the dcache */ + p0.l = (DMEM_CONTROL & 0xFFFF); + p0.h = (DMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENDCPLB; + R0 = R0 & R1; + + /* Anomaly 05000125 */ +#ifdef ANOMALY_05000125 + CLI R2; + SSYNC; +#endif + [p0] = R0; + SSYNC; +#ifdef ANOMALY_05000125 + STI R2; +#endif + + /* Initialise General-Purpose I/O Modules on BF537 */ + /* Rev 0.0 Anomaly 05000212 - PORTx_FER, + * PORT_MUX Registers Do Not accept "writes" correctly: + */ + p0.h = hi(BFIN_PORT_MUX); + p0.l = lo(BFIN_PORT_MUX); +#ifdef ANOMALY_05000212 + R0.L = W[P0]; /* Read */ + SSYNC; +#endif + R0 = (PGDE_UART | PFTE_UART)(Z); +#ifdef ANOMALY_05000212 + W[P0] = R0.L; /* Write */ + SSYNC; +#endif + W[P0] = R0.L; /* Enable both UARTS */ + SSYNC; + + p0.h = hi(PORTF_FER); + p0.l = lo(PORTF_FER); +#ifdef ANOMALY_05000212 + R0.L = W[P0]; /* Read */ + SSYNC; +#endif + R0 = 0x000F(Z); +#ifdef ANOMALY_05000212 + W[P0] = R0.L; /* Write */ + SSYNC; +#endif + /* Enable peripheral function of PORTF for UART0 and UART1 */ + W[P0] = R0.L; + SSYNC; + +#if !defined(CONFIG_BF534) + p0.h = hi(EMAC_SYSTAT); + p0.l = lo(EMAC_SYSTAT); + R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */ + R0.l = 0xFFFF; + [P0] = R0; + SSYNC; +#endif + +#ifdef CONFIG_BF537_PORT_H + p0.h = hi(PORTH_FER); + p0.l = lo(PORTH_FER); + R0.L = W[P0]; /* Read */ + SSYNC; + R0 = 0x0000; + W[P0] = R0.L; /* Write */ + SSYNC; + W[P0] = R0.L; /* Disable peripheral function of PORTH */ + SSYNC; +#endif + + /*Initialise UART*/ + p0.h = hi(UART_LCR); + p0.l = lo(UART_LCR); + r0 = 0x0(Z); + w[p0] = r0.L; /* To enable DLL writes */ + ssync; + + p0.h = hi(UART_DLL); + p0.l = lo(UART_DLL); + r0 = 0x00(Z); + w[p0] = r0.L; + ssync; + + p0.h = hi(UART_DLH); + p0.l = lo(UART_DLH); + r0 = 0x00(Z); + w[p0] = r0.L; + ssync; + + p0.h = hi(UART_GCTL); + p0.l = lo(UART_GCTL); + r0 = 0x0(Z); + w[p0] = r0.L; /* To enable UART clock */ + ssync; + + /* Initialize stack pointer */ + sp.l = lo(INITIAL_STACK); + sp.h = hi(INITIAL_STACK); + fp = sp; + usp = sp; + + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ + call _bf53x_relocate_l1_mem; +#if CONFIG_BFIN_KERNEL_CLOCK + call _start_dma_code; +#endif + /* Code for initializing Async memory banks */ + + p2.h = hi(EBIU_AMBCTL1); + p2.l = lo(EBIU_AMBCTL1); + r0.h = hi(AMBCTL1VAL); + r0.l = lo(AMBCTL1VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMBCTL0); + p2.l = lo(EBIU_AMBCTL0); + r0.h = hi(AMBCTL0VAL); + r0.l = lo(AMBCTL0VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMGCTL); + p2.l = lo(EBIU_AMGCTL); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* This section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* EVT15 = _real_start */ + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + csync; + + p0.l = lo(IMASK); + p0.h = hi(IMASK); + p1.l = IMASK_IVG15; + p1.h = 0x0; + [p0] = p1; + csync; + + raise 15; + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; + reti = p0; +#if defined(ANOMALY_05000281) + nop; nop; nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; + +ENTRY(_real_start) + [ -- sp ] = reti; + p0.l = lo(WDOG_CTL); + p0.h = hi(WDOG_CTL); + r0 = 0xAD6(z); + w[p0] = r0; /* watchdog off for now */ + ssync; + + /* Code update for BSS size == 0 + * Zero out the bss region. + */ + + p1.l = ___bss_start; + p1.h = ___bss_start; + p2.l = ___bss_stop; + p2.h = ___bss_stop; + r0 = 0; + p2 -= p1; + lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2; +.L_clear_bss: + B[p1++] = r0; + + /* In case there is a NULL pointer reference + * Zero out region before stext + */ + + p1.l = 0x0; + p1.h = 0x0; + r0.l = __stext; + r0.h = __stext; + r0 = r0 >> 1; + p2 = r0; + r0 = 0; + lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2; +.L_clear_zero: + W[p1++] = r0; + + /* pass the uboot arguments to the global value command line */ + R0 = R7; + call _cmdline_init; + + p1.l = __rambase; + p1.h = __rambase; + r0.l = __sdata; + r0.h = __sdata; + [p1] = r0; + + p1.l = __ramstart; + p1.h = __ramstart; + p3.l = ___bss_stop; + p3.h = ___bss_stop; + + r1 = p3; + [p1] = r1; + + + /* + * load the current thread pointer and stack + */ + r1.l = _init_thread_union; + r1.h = _init_thread_union; + + r2.l = 0x2000; + r2.h = 0x0000; + r1 = r1 + r2; + sp = r1; + usp = sp; + fp = sp; + call _start_kernel; +.L_exit: + jump.s .L_exit; + +.section .l1.text +#if CONFIG_BFIN_KERNEL_CLOCK +ENTRY(_start_dma_code) + + /* Enable PHY CLK buffer output */ + p0.h = hi(VR_CTL); + p0.l = lo(VR_CTL); + r0.l = w[p0]; + bitset(r0, 14); + w[p0] = r0.l; + ssync; + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + r0.h = 0x0; + [p0] = r0; + SSYNC; + + /* + * Set PLL_CTL + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +.Lcheck_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump .Lcheck_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump .Lskip; + NOP; + BITSET (R0, 23); +.Lskip: + [P2] = R0; + SSYNC; + + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + R1 = [p2]; + R1 = R1 | R0; + [P2] = R1; + SSYNC; + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = lo(IWR_ENABLE_ALL); + r0.h = hi(IWR_ENABLE_ALL); + [p0] = r0; + SSYNC; + + RTS; +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +ENTRY(_bfin_reset) + /* No more interrupts to be handled*/ + CLI R6; + SSYNC; + +#if defined(CONFIG_MTD_M25P80) +/* + * The following code fix the SPI flash reboot issue, + * /CS signal of the chip which is using PF10 return to GPIO mode + */ + p0.h = hi(PORTF_FER); + p0.l = lo(PORTF_FER); + r0.l = 0x0000; + w[p0] = r0.l; + SSYNC; + +/* /CS return to high */ + p0.h = hi(PORTFIO); + p0.l = lo(PORTFIO); + r0.l = 0xFFFF; + w[p0] = r0.l; + SSYNC; + +/* Delay some time, This is necessary */ + r1.h = 0; + r1.l = 0x400; + p1 = r1; + lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1; +_delay_lab1: + r0.h = 0; + r0.l = 0x8000; + p0 = r0; + lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0; +_delay_lab0: + nop; +_delay_lab0_end: + nop; +_delay_lab1_end: + nop; +#endif + + /* Clear the bits 13-15 in SWRST if they werent cleared */ + p0.h = hi(SWRST); + p0.l = lo(SWRST); + csync; + r0.l = w[p0]; + + /* Clear the IMASK register */ + p0.h = hi(IMASK); + p0.l = lo(IMASK); + r0 = 0x0; + [p0] = r0; + + /* Clear the ILAT register */ + p0.h = hi(ILAT); + p0.l = lo(ILAT); + r0 = [p0]; + [p0] = r0; + SSYNC; + + /* Disable the WDOG TIMER */ + p0.h = hi(WDOG_CTL); + p0.l = lo(WDOG_CTL); + r0.l = 0xAD6; + w[p0] = r0.l; + SSYNC; + + /* Clear the sticky bit incase it is already set */ + p0.h = hi(WDOG_CTL); + p0.l = lo(WDOG_CTL); + r0.l = 0x8AD6; + w[p0] = r0.l; + SSYNC; + + /* Program the count value */ + R0.l = 0x100; + R0.h = 0x0; + P0.h = hi(WDOG_CNT); + P0.l = lo(WDOG_CNT); + [P0] = R0; + SSYNC; + + /* Program WDOG_STAT if necessary */ + P0.h = hi(WDOG_CTL); + P0.l = lo(WDOG_CTL); + R0 = W[P0](Z); + CC = BITTST(R0,1); + if !CC JUMP .LWRITESTAT; + CC = BITTST(R0,2); + if !CC JUMP .LWRITESTAT; + JUMP .LSKIP_WRITE; + +.LWRITESTAT: + /* When watch dog timer is enabled, + * a write to STAT will load the contents of CNT to STAT + */ + R0 = 0x0000(z); + P0.h = hi(WDOG_STAT); + P0.l = lo(WDOG_STAT) + [P0] = R0; + SSYNC; + +.LSKIP_WRITE: + /* Enable the reset event */ + P0.h = hi(WDOG_CTL); + P0.l = lo(WDOG_CTL); + R0 = W[P0](Z); + BITCLR(R0,1); + BITCLR(R0,2); + W[P0] = R0.L; + SSYNC; + NOP; + + /* Enable the wdog counter */ + R0 = W[P0](Z); + BITCLR(R0,4); + W[P0] = R0.L; + SSYNC; + + IDLE; + + RTS; + +.data + +/* + * Set up the usable of RAM stuff. Size of RAM is determined then + * an initial stack set up at the end. + */ + +.align 4 +__rambase: +.long 0 +__ramstart: +.long 0 +__ramend: +.long 0 diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c new file mode 100644 index 0000000000..fd6308eccb --- /dev/null +++ b/arch/blackfin/mach-bf537/ints-priority.c @@ -0,0 +1,74 @@ +/* + * File: arch/blackfin/mach-bf537/ints-priority.c + * Based on: arch/blackfin/mach-bf533/ints-priority.c + * Author: Michael Hennerich + * + * Created: + * Description: Set up the interupt priorities + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +void program_IAR(void) +{ + /* Program the IAR0 Register with the configured priority */ + bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | + ((CONFIG_IRQ_DMA_ERROR - 7) << IRQ_DMA_ERROR_POS) | + ((CONFIG_IRQ_ERROR - 7) << IRQ_ERROR_POS) | + ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) | + ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) | + ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) | + ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) | + ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS)); + + bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) | + ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) | + ((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) | + ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) | + ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS) | + ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) | + ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) | + ((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS)); + + bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) | + ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) | + ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) | + ((CONFIG_IRQ_TMR0 - 7) << IRQ_TMR0_POS) | + ((CONFIG_IRQ_TMR1 - 7) << IRQ_TMR1_POS) | + ((CONFIG_IRQ_TMR2 - 7) << IRQ_TMR2_POS) | + ((CONFIG_IRQ_TMR3 - 7) << IRQ_TMR3_POS) | + ((CONFIG_IRQ_TMR4 - 7) << IRQ_TMR4_POS)); + + bfin_write_SIC_IAR3(((CONFIG_IRQ_TMR5 - 7) << IRQ_TMR5_POS) | + ((CONFIG_IRQ_TMR6 - 7) << IRQ_TMR6_POS) | + ((CONFIG_IRQ_TMR7 - 7) << IRQ_TMR7_POS) | + ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) | + ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) | + ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) | + ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) | + ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS)); + + SSYNC(); +} diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig new file mode 100644 index 0000000000..0a17c4cf00 --- /dev/null +++ b/arch/blackfin/mach-bf561/Kconfig @@ -0,0 +1,222 @@ +if BF561 + +menu "BF561 Specific Configuration" + +comment "Core B Support" + +menu "Core B Support" + +config BF561_COREB + bool "Enable Core B support" + default y + +config BF561_COREB_RESET + bool "Enable Core B reset support" + default n + help + This requires code in the application that is loaded + into Core B. In order to reset, the application needs + to install an interrupt handler for Supplemental + Interrupt 0, that sets RETI to 0xff600000 and writes + bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0. + This causes Core B to stall when Supplemental Interrupt + 0 is set, and will reset PC to 0xff600000 when + COREB_SRAM_INIT is cleared. + +endmenu + +comment "Interrupt Priority Assignment" + +menu "Priority" + +config IRQ_PLL_WAKEUP + int "PLL Wakeup Interrupt" + default 7 +config IRQ_DMA1_ERROR + int "DMA1 Error (generic)" + default 7 +config IRQ_DMA2_ERROR + int "DMA2 Error (generic)" + default 7 +config IRQ_IMDMA_ERROR + int "IMDMA Error (generic)" + default 7 +config IRQ_PPI0_ERROR + int "PPI0 Error Interrupt" + default 7 +config IRQ_PPI1_ERROR + int "PPI1 Error Interrupt" + default 7 +config IRQ_SPORT0_ERROR + int "SPORT0 Error Interrupt" + default 7 +config IRQ_SPORT1_ERROR + int "SPORT1 Error Interrupt" + default 7 +config IRQ_SPI_ERROR + int "SPI Error Interrupt" + default 7 +config IRQ_UART_ERROR + int "UART Error Interrupt" + default 7 +config IRQ_RESERVED_ERROR + int "Reserved Interrupt" + default 7 +config IRQ_DMA1_0 + int "DMA1 0 Interrupt(PPI1)" + default 8 +config IRQ_DMA1_1 + int "DMA1 1 Interrupt(PPI2)" + default 8 +config IRQ_DMA1_2 + int "DMA1 2 Interrupt" + default 8 +config IRQ_DMA1_3 + int "DMA1 3 Interrupt" + default 8 +config IRQ_DMA1_4 + int "DMA1 4 Interrupt" + default 8 +config IRQ_DMA1_5 + int "DMA1 5 Interrupt" + default 8 +config IRQ_DMA1_6 + int "DMA1 6 Interrupt" + default 8 +config IRQ_DMA1_7 + int "DMA1 7 Interrupt" + default 8 +config IRQ_DMA1_8 + int "DMA1 8 Interrupt" + default 8 +config IRQ_DMA1_9 + int "DMA1 9 Interrupt" + default 8 +config IRQ_DMA1_10 + int "DMA1 10 Interrupt" + default 8 +config IRQ_DMA1_11 + int "DMA1 11 Interrupt" + default 8 +config IRQ_DMA2_0 + int "DMA2 0 (SPORT0 RX)" + default 9 +config IRQ_DMA2_1 + int "DMA2 1 (SPORT0 TX)" + default 9 +config IRQ_DMA2_2 + int "DMA2 2 (SPORT1 RX)" + default 9 +config IRQ_DMA2_3 + int "DMA2 3 (SPORT2 TX)" + default 9 +config IRQ_DMA2_4 + int "DMA2 4 (SPI)" + default 9 +config IRQ_DMA2_5 + int "DMA2 5 (UART RX)" + default 9 +config IRQ_DMA2_6 + int "DMA2 6 (UART TX)" + default 9 +config IRQ_DMA2_7 + int "DMA2 7 Interrupt" + default 9 +config IRQ_DMA2_8 + int "DMA2 8 Interrupt" + default 9 +config IRQ_DMA2_9 + int "DMA2 9 Interrupt" + default 9 +config IRQ_DMA2_10 + int "DMA2 10 Interrupt" + default 9 +config IRQ_DMA2_11 + int "DMA2 11 Interrupt" + default 9 +config IRQ_TIMER0 + int "TIMER 0 Interrupt" + default 10 +config IRQ_TIMER1 + int "TIMER 1 Interrupt" + default 10 +config IRQ_TIMER2 + int "TIMER 2 Interrupt" + default 10 +config IRQ_TIMER3 + int "TIMER 3 Interrupt" + default 10 +config IRQ_TIMER4 + int "TIMER 4 Interrupt" + default 10 +config IRQ_TIMER5 + int "TIMER 5 Interrupt" + default 10 +config IRQ_TIMER6 + int "TIMER 6 Interrupt" + default 10 +config IRQ_TIMER7 + int "TIMER 7 Interrupt" + default 10 +config IRQ_TIMER8 + int "TIMER 8 Interrupt" + default 10 +config IRQ_TIMER9 + int "TIMER 9 Interrupt" + default 10 +config IRQ_TIMER10 + int "TIMER 10 Interrupt" + default 10 +config IRQ_TIMER11 + int "TIMER 11 Interrupt" + default 10 +config IRQ_PROG0_INTA + int "Programmable Flags0 A (8)" + default 11 +config IRQ_PROG0_INTB + int "Programmable Flags0 B (8)" + default 11 +config IRQ_PROG1_INTA + int "Programmable Flags1 A (8)" + default 11 +config IRQ_PROG1_INTB + int "Programmable Flags1 B (8)" + default 11 +config IRQ_PROG2_INTA + int "Programmable Flags2 A (8)" + default 11 +config IRQ_PROG2_INTB + int "Programmable Flags2 B (8)" + default 11 +config IRQ_DMA1_WRRD0 + int "MDMA1 0 write/read INT" + default 8 +config IRQ_DMA1_WRRD1 + int "MDMA1 1 write/read INT" + default 8 +config IRQ_DMA2_WRRD0 + int "MDMA2 0 write/read INT" + default 9 +config IRQ_DMA2_WRRD1 + int "MDMA2 1 write/read INT" + default 9 +config IRQ_IMDMA_WRRD0 + int "IMDMA 0 write/read INT" + default 12 +config IRQ_IMDMA_WRRD1 + int "IMDMA 1 write/read INT" + default 12 +config IRQ_WDTIMER + int "Watch Dog Timer" + default 13 + + help + Enter the priority numbers between 7-13 ONLY. Others are Reserved. + This applies to all the above. It is not recommended to assign the + highest priority number 7 to UART or any other device. + +endmenu + +endmenu + +endif diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile new file mode 100644 index 0000000000..57f475a551 --- /dev/null +++ b/arch/blackfin/mach-bf561/Makefile @@ -0,0 +1,9 @@ +# +# arch/blackfin/mach-bf561/Makefile +# + +extra-y := head.o + +obj-y := ints-priority.o + +obj-$(CONFIG_BF561_COREB) += coreb.o diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile new file mode 100644 index 0000000000..886edc739a --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/Makefile @@ -0,0 +1,7 @@ +# +# arch/blackfin/mach-bf561/boards/Makefile +# + +obj-$(CONFIG_GENERIC_BOARD) += generic_board.o +obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o +obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c new file mode 100644 index 0000000000..6824e956d1 --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -0,0 +1,289 @@ +/* + * File: arch/blackfin/mach-bf533/boards/cm_bf561.c + * Based on: arch/blackfin/mach-bf533/boards/ezkit.c + * Author: Aidan Williams Copright 2005 + * + * Created: 2006 + * Description: Board description file + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "Bluetechnix CM BF561"; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI perpherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + },{ + .name = "kernel", + .size = 0xe0000, + .offset = 0x20000 + },{ + .name = "file system", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x28000300, + .end = 0x28000300 + 16, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x24008000, + .end = 0x24008000, + .flags = IORESOURCE_MEM, + },{ + .start = 0x24008004, + .end = 0x24008004, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PF47, + .end = IRQ_PF47, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +static struct platform_device *cm_bf561_devices[] __initdata = { + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif + +}; + +static int __init cm_bf561_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + return 0; +} + +arch_initcall(cm_bf561_init); diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c new file mode 100644 index 0000000000..14eb4f9a68 --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -0,0 +1,147 @@ +/* + * File: arch/blackfin/mach-bf561/ezkit.c + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "ADDS-BF561-EZKIT"; + +/* + * USB-LAN EzExtender board + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x2C010300, + .end = 0x2C010300 + 16, + .flags = IORESOURCE_MEM, + },{ + + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#ifdef CONFIG_SPI_BFIN +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif +#endif + +/* SPI controller data */ +static struct bfin5xx_spi_master spi_bfin_master_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +static struct platform_device spi_bfin_master_device = { + .name = "bfin-spi-master", + .id = 1, /* Bus number */ + .dev = { + .platform_data = &spi_bfin_master_info, /* Passed to driver */ + }, +}; + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif +}; + +static struct platform_device *ezkit_devices[] __initdata = { +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &spi_bfin_master_device, +#endif +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif +}; + +static int __init ezkit_init(void) +{ + int ret; + + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + ret = platform_add_devices(ezkit_devices, + ARRAY_SIZE(ezkit_devices)); + if (ret < 0) + return ret; + return spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +} + +arch_initcall(ezkit_init); diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c new file mode 100644 index 0000000000..585ecdd2f6 --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/generic_board.c @@ -0,0 +1,82 @@ +/* + * File: arch/blackfin/mach-bf561/generic_board.c + * Based on: arch/blackfin/mach-bf533/ezkit.c + * Author: Aidan Williams + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +char *bfin_board_name = "UNKNOWN BOARD"; + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .start = 0x2C010300, + .end = 0x2C010300 + 16, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PROG_INTB, + .end = IRQ_PROG_INTB, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + },{ + /* + * denotes the flag pin and is used directly if + * CONFIG_IRQCHIP_DEMUX_GPIO is defined. + */ + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +static struct platform_device *generic_board_devices[] __initdata = { +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif +}; + +static int __init generic_board_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + return platform_add_devices(generic_board_devices, + ARRAY_SIZE(generic_board_devices)); +} + +arch_initcall(generic_board_init); diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c new file mode 100644 index 0000000000..b28582fe08 --- /dev/null +++ b/arch/blackfin/mach-bf561/coreb.c @@ -0,0 +1,402 @@ +/* + * File: arch/blackfin/mach-bf561/coreb.c + * Based on: + * Author: + * + * Created: + * Description: Handle CoreB on a BF561 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#define MODULE_VER "v0.1" + +static spinlock_t coreb_lock; +static wait_queue_head_t coreb_dma_wait; + +#define COREB_IS_OPEN 0x00000001 +#define COREB_IS_RUNNING 0x00000010 + +#define CMD_COREB_INDEX 1 +#define CMD_COREB_START 2 +#define CMD_COREB_STOP 3 +#define CMD_COREB_RESET 4 + +#define COREB_MINOR 229 + +static unsigned long coreb_status = 0; +static unsigned long coreb_base = 0xff600000; +static unsigned long coreb_size = 0x4000; +int coreb_dma_done; + +static loff_t coreb_lseek(struct file *file, loff_t offset, int origin); +static ssize_t coreb_read(struct file *file, char *buf, size_t count, + loff_t * ppos); +static ssize_t coreb_write(struct file *file, const char *buf, size_t count, + loff_t * ppos); +static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg); +static int coreb_open(struct inode *inode, struct file *file); +static int coreb_release(struct inode *inode, struct file *file); + +static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id) +{ + clear_dma_irqstat(CH_MEM_STREAM2_DEST); + coreb_dma_done = 1; + wake_up_interruptible(&coreb_dma_wait); + return IRQ_HANDLED; +} + +static ssize_t coreb_write(struct file *file, const char *buf, size_t count, + loff_t * ppos) +{ + unsigned long p = *ppos; + ssize_t wrote = 0; + + if (p + count > coreb_size) + return -EFAULT; + + while (count > 0) { + int len = count; + + if (len > PAGE_SIZE) + len = PAGE_SIZE; + + coreb_dma_done = 0; + + /* Source Channel */ + set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf); + set_dma_x_count(CH_MEM_STREAM2_SRC, len); + set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); + set_dma_config(CH_MEM_STREAM2_SRC, RESTART); + /* Destination Channel */ + set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p); + set_dma_x_count(CH_MEM_STREAM2_DEST, len); + set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char)); + set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN); + + enable_dma(CH_MEM_STREAM2_SRC); + enable_dma(CH_MEM_STREAM2_DEST); + + wait_event_interruptible(coreb_dma_wait, coreb_dma_done); + + disable_dma(CH_MEM_STREAM2_SRC); + disable_dma(CH_MEM_STREAM2_DEST); + + count -= len; + wrote += len; + buf += len; + p += len; + } + *ppos = p; + return wrote; +} + +static ssize_t coreb_read(struct file *file, char *buf, size_t count, + loff_t * ppos) +{ + unsigned long p = *ppos; + ssize_t read = 0; + + if ((p + count) > coreb_size) + return -EFAULT; + + while (count > 0) { + int len = count; + + if (len > PAGE_SIZE) + len = PAGE_SIZE; + + coreb_dma_done = 0; + + /* Source Channel */ + set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p); + set_dma_x_count(CH_MEM_STREAM2_SRC, len); + set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); + set_dma_config(CH_MEM_STREAM2_SRC, RESTART); + /* Destination Channel */ + set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf); + set_dma_x_count(CH_MEM_STREAM2_DEST, len); + set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char)); + set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN); + + enable_dma(CH_MEM_STREAM2_SRC); + enable_dma(CH_MEM_STREAM2_DEST); + + wait_event_interruptible(coreb_dma_wait, coreb_dma_done); + + disable_dma(CH_MEM_STREAM2_SRC); + disable_dma(CH_MEM_STREAM2_DEST); + + count -= len; + read += len; + buf += len; + p += len; + } + + return read; +} + +static loff_t coreb_lseek(struct file *file, loff_t offset, int origin) +{ + loff_t ret; + + mutex_lock(&file->f_dentry->d_inode->i_mutex); + + switch (origin) { + case 0 /* SEEK_SET */ : + if (offset < coreb_size) { + file->f_pos = offset; + ret = file->f_pos; + } else + ret = -EINVAL; + break; + case 1 /* SEEK_CUR */ : + if ((offset + file->f_pos) < coreb_size) { + file->f_pos += offset; + ret = file->f_pos; + } else + ret = -EINVAL; + default: + ret = -EINVAL; + } + mutex_unlock(&file->f_dentry->d_inode->i_mutex); + return ret; +} + +static int coreb_open(struct inode *inode, struct file *file) +{ + spin_lock_irq(&coreb_lock); + + if (coreb_status & COREB_IS_OPEN) + goto out_busy; + + coreb_status |= COREB_IS_OPEN; + + spin_unlock_irq(&coreb_lock); + return 0; + + out_busy: + spin_unlock_irq(&coreb_lock); + return -EBUSY; +} + +static int coreb_release(struct inode *inode, struct file *file) +{ + spin_lock_irq(&coreb_lock); + coreb_status &= ~COREB_IS_OPEN; + spin_unlock_irq(&coreb_lock); + return 0; +} + +static int coreb_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int retval = 0; + int coreb_index = 0; + + switch (cmd) { + case CMD_COREB_INDEX: + if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) { + retval = -EFAULT; + break; + } + + spin_lock_irq(&coreb_lock); + switch (coreb_index) { + case 0: + coreb_base = 0xff600000; + coreb_size = 0x4000; + break; + case 1: + coreb_base = 0xff610000; + coreb_size = 0x4000; + break; + case 2: + coreb_base = 0xff500000; + coreb_size = 0x8000; + break; + case 3: + coreb_base = 0xff400000; + coreb_size = 0x8000; + break; + default: + retval = -EINVAL; + break; + } + spin_unlock_irq(&coreb_lock); + + mutex_lock(&file->f_dentry->d_inode->i_mutex); + file->f_pos = 0; + mutex_unlock(&file->f_dentry->d_inode->i_mutex); + break; + case CMD_COREB_START: + spin_lock_irq(&coreb_lock); + if (coreb_status & COREB_IS_RUNNING) { + retval = -EBUSY; + break; + } + printk(KERN_INFO "Starting Core B\n"); + coreb_status |= COREB_IS_RUNNING; + bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020); + SSYNC(); + spin_lock_irq(&coreb_lock); + break; +#if defined(CONFIG_BF561_COREB_RESET) + case CMD_COREB_STOP: + spin_lock_irq(&coreb_lock); + printk(KERN_INFO "Stopping Core B\n"); + bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020); + bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080); + coreb_status &= ~COREB_IS_RUNNING; + spin_lock_irq(&coreb_lock); + break; + case CMD_COREB_RESET: + printk(KERN_INFO "Resetting Core B\n"); + bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080); + break; +#endif + } + + return retval; +} + +static struct file_operations coreb_fops = { + .owner = THIS_MODULE, + .llseek = coreb_lseek, + .read = coreb_read, + .write = coreb_write, + .ioctl = coreb_ioctl, + .open = coreb_open, + .release = coreb_release +}; + +static struct miscdevice coreb_dev = { + COREB_MINOR, + "coreb", + &coreb_fops +}; + +static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, + "Base Address:\t0x%08lx\n" + "Core B is %s\n" + "SICA_SYSCR:\t%04x\n" + "SICB_SYSCR:\t%04x\n" + "\n" + "IRQ Status:\tCore A\t\tCore B\n" + "ISR0:\t\t%08x\t\t%08x\n" + "ISR1:\t\t%08x\t\t%08x\n" + "IMASK0:\t\t%08x\t\t%08x\n" + "IMASK1:\t\t%08x\t\t%08x\n", + coreb_base, + coreb_status & COREB_IS_RUNNING ? "running" : "stalled", + bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(), + bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(), + bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(), + bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(), + bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1()); +} + +static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL); + +int __init bf561_coreb_init(void) +{ + init_waitqueue_head(&coreb_dma_wait); + + spin_lock_init(&coreb_lock); + /* Request the core memory regions for Core B */ + if (request_mem_region(0xff600000, 0x4000, + "Core B - Instruction SRAM") == NULL) + goto exit; + + if (request_mem_region(0xFF610000, 0x4000, + "Core B - Instruction SRAM") == NULL) + goto release_instruction_a_sram; + + if (request_mem_region(0xFF500000, 0x8000, + "Core B - Data Bank B SRAM") == NULL) + goto release_instruction_b_sram; + + if (request_mem_region(0xff400000, 0x8000, + "Core B - Data Bank A SRAM") == NULL) + goto release_data_b_sram; + + if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0) + goto release_data_a_sram; + + if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0) + goto release_dma_dest; + + set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL); + + misc_register(&coreb_dev); + + if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status)) + goto release_dma_src; + + printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER); + return 0; + + release_dma_src: + free_dma(CH_MEM_STREAM2_SRC); + release_dma_dest: + free_dma(CH_MEM_STREAM2_DEST); + release_data_a_sram: + release_mem_region(0xff400000, 0x8000); + release_data_b_sram: + release_mem_region(0xff500000, 0x8000); + release_instruction_b_sram: + release_mem_region(0xff610000, 0x4000); + release_instruction_a_sram: + release_mem_region(0xff600000, 0x4000); + exit: + return -ENOMEM; +} + +void __exit bf561_coreb_exit(void) +{ + device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status); + misc_deregister(&coreb_dev); + + release_mem_region(0xff610000, 0x4000); + release_mem_region(0xff600000, 0x4000); + release_mem_region(0xff500000, 0x8000); + release_mem_region(0xff400000, 0x8000); + + free_dma(CH_MEM_STREAM2_DEST); + free_dma(CH_MEM_STREAM2_SRC); +} + +module_init(bf561_coreb_init); +module_exit(bf561_coreb_exit); + +MODULE_AUTHOR("Bas Vermeulen "); +MODULE_DESCRIPTION("BF561 Core B Support"); diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S new file mode 100644 index 0000000000..7bca478526 --- /dev/null +++ b/arch/blackfin/mach-bf561/head.S @@ -0,0 +1,512 @@ +/* + * File: arch/blackfin/mach-bf561/head.S + * Based on: arch/blackfin/mach-bf533/head.S + * Author: + * + * Created: + * Description: BF561 startup file + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#if CONFIG_BFIN_KERNEL_CLOCK +#include +#endif + +.global __rambase +.global __ramstart +.global __ramend +.extern ___bss_stop +.extern ___bss_start +.extern _bf53x_relocate_l1_mem + +#define INITIAL_STACK 0xFFB01000 + +.text + +ENTRY(__start) +ENTRY(__stext) + /* R0: argument of command line string, passed from uboot, save it */ + R7 = R0; + /* Set the SYSCFG register */ + R0 = 0x36; + SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/ + R0 = 0; + + /*Clear Out All the data and pointer Registers*/ + R1 = R0; + R2 = R0; + R3 = R0; + R4 = R0; + R5 = R0; + R6 = R0; + + P0 = R0; + P1 = R0; + P2 = R0; + P3 = R0; + P4 = R0; + P5 = R0; + + LC0 = r0; + LC1 = r0; + L0 = r0; + L1 = r0; + L2 = r0; + L3 = r0; + + /* Clear Out All the DAG Registers*/ + B0 = r0; + B1 = r0; + B2 = r0; + B3 = r0; + + I0 = r0; + I1 = r0; + I2 = r0; + I3 = r0; + + M0 = r0; + M1 = r0; + M2 = r0; + M3 = r0; + + /* Turn off the icache */ + p0.l = (IMEM_CONTROL & 0xFFFF); + p0.h = (IMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENICPLB; + R0 = R0 & R1; + + /* Anomaly 05000125 */ +#ifdef ANOMALY_05000125 + CLI R2; + SSYNC; +#endif + [p0] = R0; + SSYNC; +#ifdef ANOMALY_05000125 + STI R2; +#endif + + /* Turn off the dcache */ + p0.l = (DMEM_CONTROL & 0xFFFF); + p0.h = (DMEM_CONTROL >> 16); + R1 = [p0]; + R0 = ~ENDCPLB; + R0 = R0 & R1; + + /* Anomaly 05000125 */ +#ifdef ANOMALY_05000125 + CLI R2; + SSYNC; +#endif + [p0] = R0; + SSYNC; +#ifdef ANOMALY_05000125 + STI R2; +#endif + + /* Initialise UART*/ + p0.h = hi(UART_LCR); + p0.l = lo(UART_LCR); + r0 = 0x0(Z); + w[p0] = r0.L; /* To enable DLL writes */ + ssync; + + p0.h = hi(UART_DLL); + p0.l = lo(UART_DLL); + r0 = 0x0(Z); + w[p0] = r0.L; + ssync; + + p0.h = hi(UART_DLH); + p0.l = lo(UART_DLH); + r0 = 0x00(Z); + w[p0] = r0.L; + ssync; + + p0.h = hi(UART_GCTL); + p0.l = lo(UART_GCTL); + r0 = 0x0(Z); + w[p0] = r0.L; /* To enable UART clock */ + ssync; + + /* Initialize stack pointer */ + sp.l = lo(INITIAL_STACK); + sp.h = hi(INITIAL_STACK); + fp = sp; + usp = sp; + + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ + call _bf53x_relocate_l1_mem; +#if CONFIG_BFIN_KERNEL_CLOCK + call _start_dma_code; +#endif + + /* Code for initializing Async memory banks */ + + p2.h = hi(EBIU_AMBCTL1); + p2.l = lo(EBIU_AMBCTL1); + r0.h = hi(AMBCTL1VAL); + r0.l = lo(AMBCTL1VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMBCTL0); + p2.l = lo(EBIU_AMBCTL0); + r0.h = hi(AMBCTL0VAL); + r0.l = lo(AMBCTL0VAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_AMGCTL); + p2.l = lo(EBIU_AMGCTL); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* This section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* EVT15 = _real_start */ + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + csync; + + p0.l = lo(IMASK); + p0.h = hi(IMASK); + p1.l = IMASK_IVG15; + p1.h = 0x0; + [p0] = p1; + csync; + + raise 15; + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; + reti = p0; +#if defined(ANOMALY_05000281) + nop; nop; nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; + +ENTRY(_real_start) + [ -- sp ] = reti; + p0.l = lo(WDOGA_CTL); + p0.h = hi(WDOGA_CTL); + r0 = 0xAD6(z); + w[p0] = r0; /* watchdog off for now */ + ssync; + + /* Code update for BSS size == 0 + * Zero out the bss region. + */ + + p1.l = ___bss_start; + p1.h = ___bss_start; + p2.l = ___bss_stop; + p2.h = ___bss_stop; + r0 = 0; + p2 -= p1; + lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2; +.L_clear_bss: + B[p1++] = r0; + + /* In case there is a NULL pointer reference + * Zero out region before stext + */ + + p1.l = 0x0; + p1.h = 0x0; + r0.l = __stext; + r0.h = __stext; + r0 = r0 >> 1; + p2 = r0; + r0 = 0; + lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2; +.L_clear_zero: + W[p1++] = r0; + +/* pass the uboot arguments to the global value command line */ + R0 = R7; + call _cmdline_init; + + p1.l = __rambase; + p1.h = __rambase; + r0.l = __sdata; + r0.h = __sdata; + [p1] = r0; + + p1.l = __ramstart; + p1.h = __ramstart; + p3.l = ___bss_stop; + p3.h = ___bss_stop; + + r1 = p3; + [p1] = r1; + + /* + * load the current thread pointer and stack + */ + r1.l = _init_thread_union; + r1.h = _init_thread_union; + + r2.l = 0x2000; + r2.h = 0x0000; + r1 = r1 + r2; + sp = r1; + usp = sp; + fp = sp; + call _start_kernel; +.L_exit: + jump.s .L_exit; + +.section .l1.text +#if CONFIG_BFIN_KERNEL_CLOCK +ENTRY(_start_dma_code) + p0.h = hi(SICA_IWR0); + p0.l = lo(SICA_IWR0); + r0.l = 0x1; + [p0] = r0; + SSYNC; + + /* + * Set PLL_CTL + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +.Lcheck_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump .Lcheck_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump .Lskip; + NOP; + BITSET (R0, 23); +.Lskip: + [P2] = R0; + SSYNC; + + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + R1 = [p2]; + R1 = R1 | R0; + [P2] = R1; + SSYNC; + + RTS; +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +ENTRY(_bfin_reset) + /* No more interrupts to be handled*/ + CLI R6; + SSYNC; + +#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) + p0.h = hi(FIO_INEN); + p0.l = lo(FIO_INEN); + r0.l = ~(PF1 | PF0); + w[p0] = r0.l; + + p0.h = hi(FIO_DIR); + p0.l = lo(FIO_DIR); + r0.l = (PF1 | PF0); + w[p0] = r0.l; + + p0.h = hi(FIO_FLAG_C); + p0.l = lo(FIO_FLAG_C); + r0.l = (PF1 | PF0); + w[p0] = r0.l; +#endif + + /* Clear the bits 13-15 in SWRST if they werent cleared */ + p0.h = hi(SICA_SWRST); + p0.l = lo(SICA_SWRST); + csync; + r0.l = w[p0]; + + /* Clear the IMASK register */ + p0.h = hi(IMASK); + p0.l = lo(IMASK); + r0 = 0x0; + [p0] = r0; + + /* Clear the ILAT register */ + p0.h = hi(ILAT); + p0.l = lo(ILAT); + r0 = [p0]; + [p0] = r0; + SSYNC; + + /* Disable the WDOG TIMER */ + p0.h = hi(WDOGA_CTL); + p0.l = lo(WDOGA_CTL); + r0.l = 0xAD6; + w[p0] = r0.l; + SSYNC; + + /* Clear the sticky bit incase it is already set */ + p0.h = hi(WDOGA_CTL); + p0.l = lo(WDOGA_CTL); + r0.l = 0x8AD6; + w[p0] = r0.l; + SSYNC; + + /* Program the count value */ + R0.l = 0x100; + R0.h = 0x0; + P0.h = hi(WDOGA_CNT); + P0.l = lo(WDOGA_CNT); + [P0] = R0; + SSYNC; + + /* Program WDOG_STAT if necessary */ + P0.h = hi(WDOGA_CTL); + P0.l = lo(WDOGA_CTL); + R0 = W[P0](Z); + CC = BITTST(R0,1); + if !CC JUMP .LWRITESTAT; + CC = BITTST(R0,2); + if !CC JUMP .LWRITESTAT; + JUMP .LSKIP_WRITE; + +.LWRITESTAT: + /* When watch dog timer is enabled, + * a write to STAT will load the contents of CNT to STAT + */ + R0 = 0x0000(z); + P0.h = hi(WDOGA_STAT); + P0.l = lo(WDOGA_STAT) + [P0] = R0; + SSYNC; + +.LSKIP_WRITE: + /* Enable the reset event */ + P0.h = hi(WDOGA_CTL); + P0.l = lo(WDOGA_CTL); + R0 = W[P0](Z); + BITCLR(R0,1); + BITCLR(R0,2); + W[P0] = R0.L; + SSYNC; + NOP; + + /* Enable the wdog counter */ + R0 = W[P0](Z); + BITCLR(R0,4); + W[P0] = R0.L; + SSYNC; + + IDLE; + + RTS; + +.data + +/* + * Set up the usable of RAM stuff. Size of RAM is determined then + * an initial stack set up at the end. + */ + +.align 4 +__rambase: +.long 0 +__ramstart: +.long 0 +__ramend: +.long 0 diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c new file mode 100644 index 0000000000..89c52ff95b --- /dev/null +++ b/arch/blackfin/mach-bf561/ints-priority.c @@ -0,0 +1,108 @@ +/* + * File: arch/blackfin/mach-bf561/ints-priority.c + * Based on: arch/blackfin/mach-bf537/ints-priority.c + * Author: Michael Hennerich + * + * Created: + * Description: Set up the interupt priorities + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +void program_IAR(void) +{ + /* Program the IAR0 Register with the configured priority */ + bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | + ((CONFIG_IRQ_DMA1_ERROR - 7) << IRQ_DMA1_ERROR_POS) | + ((CONFIG_IRQ_DMA2_ERROR - 7) << IRQ_DMA2_ERROR_POS) | + ((CONFIG_IRQ_IMDMA_ERROR - 7) << IRQ_IMDMA_ERROR_POS) | + ((CONFIG_IRQ_PPI0_ERROR - 7) << IRQ_PPI0_ERROR_POS) | + ((CONFIG_IRQ_PPI1_ERROR - 7) << IRQ_PPI1_ERROR_POS) | + ((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) | + ((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS)); + + bfin_write_SICA_IAR1(((CONFIG_IRQ_SPI_ERROR - 7) << IRQ_SPI_ERROR_POS) | + ((CONFIG_IRQ_UART_ERROR - 7) << IRQ_UART_ERROR_POS) | + ((CONFIG_IRQ_RESERVED_ERROR - 7) << IRQ_RESERVED_ERROR_POS) | + ((CONFIG_IRQ_DMA1_0 - 7) << IRQ_DMA1_0_POS) | + ((CONFIG_IRQ_DMA1_1 - 7) << IRQ_DMA1_1_POS) | + ((CONFIG_IRQ_DMA1_2 - 7) << IRQ_DMA1_2_POS) | + ((CONFIG_IRQ_DMA1_3 - 7) << IRQ_DMA1_3_POS) | + ((CONFIG_IRQ_DMA1_4 - 7) << IRQ_DMA1_4_POS)); + + bfin_write_SICA_IAR2(((CONFIG_IRQ_DMA1_5 - 7) << IRQ_DMA1_5_POS) | + ((CONFIG_IRQ_DMA1_6 - 7) << IRQ_DMA1_6_POS) | + ((CONFIG_IRQ_DMA1_7 - 7) << IRQ_DMA1_7_POS) | + ((CONFIG_IRQ_DMA1_8 - 7) << IRQ_DMA1_8_POS) | + ((CONFIG_IRQ_DMA1_9 - 7) << IRQ_DMA1_9_POS) | + ((CONFIG_IRQ_DMA1_10 - 7) << IRQ_DMA1_10_POS) | + ((CONFIG_IRQ_DMA1_11 - 7) << IRQ_DMA1_11_POS) | + ((CONFIG_IRQ_DMA2_0 - 7) << IRQ_DMA2_0_POS)); + + bfin_write_SICA_IAR3(((CONFIG_IRQ_DMA2_1 - 7) << IRQ_DMA2_1_POS) | + ((CONFIG_IRQ_DMA2_2 - 7) << IRQ_DMA2_2_POS) | + ((CONFIG_IRQ_DMA2_3 - 7) << IRQ_DMA2_3_POS) | + ((CONFIG_IRQ_DMA2_4 - 7) << IRQ_DMA2_4_POS) | + ((CONFIG_IRQ_DMA2_5 - 7) << IRQ_DMA2_5_POS) | + ((CONFIG_IRQ_DMA2_6 - 7) << IRQ_DMA2_6_POS) | + ((CONFIG_IRQ_DMA2_7 - 7) << IRQ_DMA2_7_POS) | + ((CONFIG_IRQ_DMA2_8 - 7) << IRQ_DMA2_8_POS)); + + bfin_write_SICA_IAR4(((CONFIG_IRQ_DMA2_9 - 7) << IRQ_DMA2_9_POS) | + ((CONFIG_IRQ_DMA2_10 - 7) << IRQ_DMA2_10_POS) | + ((CONFIG_IRQ_DMA2_11 - 7) << IRQ_DMA2_11_POS) | + ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) | + ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) | + ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) | + ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) | + ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS)); + + bfin_write_SICA_IAR5(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) | + ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) | + ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) | + ((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) | + ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) | + ((CONFIG_IRQ_TIMER10 - 7) << IRQ_TIMER10_POS) | + ((CONFIG_IRQ_TIMER11 - 7) << IRQ_TIMER11_POS) | + ((CONFIG_IRQ_PROG0_INTA - 7) << IRQ_PROG0_INTA_POS)); + + bfin_write_SICA_IAR6(((CONFIG_IRQ_PROG0_INTB - 7) << IRQ_PROG0_INTB_POS) | + ((CONFIG_IRQ_PROG1_INTA - 7) << IRQ_PROG1_INTA_POS) | + ((CONFIG_IRQ_PROG1_INTB - 7) << IRQ_PROG1_INTB_POS) | + ((CONFIG_IRQ_PROG2_INTA - 7) << IRQ_PROG2_INTA_POS) | + ((CONFIG_IRQ_PROG2_INTB - 7) << IRQ_PROG2_INTB_POS) | + ((CONFIG_IRQ_DMA1_WRRD0 - 7) << IRQ_DMA1_WRRD0_POS) | + ((CONFIG_IRQ_DMA1_WRRD1 - 7) << IRQ_DMA1_WRRD1_POS) | + ((CONFIG_IRQ_DMA2_WRRD0 - 7) << IRQ_DMA2_WRRD0_POS)); + + bfin_write_SICA_IAR7(((CONFIG_IRQ_DMA2_WRRD1 - 7) << IRQ_DMA2_WRRD1_POS) | + ((CONFIG_IRQ_IMDMA_WRRD0 - 7) << IRQ_IMDMA_WRRD0_POS) | + ((CONFIG_IRQ_IMDMA_WRRD1 - 7) << IRQ_IMDMA_WRRD1_POS) | + ((CONFIG_IRQ_WDTIMER - 7) << IRQ_WDTIMER_POS) | + (0 << IRQ_RESERVED_1_POS) | (0 << IRQ_RESERVED_2_POS) | + (0 << IRQ_SUPPLE_0_POS) | (0 << IRQ_SUPPLE_1_POS)); + + SSYNC(); +} diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile new file mode 100644 index 0000000000..d3a49073d1 --- /dev/null +++ b/arch/blackfin/mach-common/Makefile @@ -0,0 +1,12 @@ +# +# arch/blackfin/mach-common/Makefile +# + +obj-y := \ + cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \ + interrupt.o lock.o dpmc.o irqpanic.o + +obj-$(CONFIG_CPLB_INFO) += cplbinfo.o +obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o +obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o +obj-$(CONFIG_PM) += pm.o diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S new file mode 100644 index 0000000000..bb9446ef66 --- /dev/null +++ b/arch/blackfin/mach-common/cache.S @@ -0,0 +1,253 @@ +/* + * File: arch/blackfin/mach-common/cache.S + * Based on: + * Author: LG Soft India + * + * Created: + * Description: cache control support + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +.text +.align 2 +ENTRY(_cache_invalidate) + + /* + * Icache or DcacheA or DcacheB Invalidation + * or any combination thereof + * R0 has bits + * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P + * set as required + */ + [--SP] = R7; + + R7 = R0; + CC = BITTST(R7,CPLB_ENABLE_ICACHE_P); + IF !CC JUMP .Lno_icache; + [--SP] = RETS; + CALL _icache_invalidate; + RETS = [SP++]; +.Lno_icache: + CC = BITTST(R7,CPLB_ENABLE_DCACHE_P); + IF !CC JUMP .Lno_dcache_a; + R0 = 0; /* specifies bank A */ + [--SP] = RETS; + CALL _dcache_invalidate; + RETS = [SP++]; +.Lno_dcache_a: + CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P); + IF !CC JUMP .Lno_dcache_b; + R0 = 0; + BITSET(R0, 23); /* specifies bank B */ + [--SP] = RETS; + CALL _dcache_invalidate; + RETS = [SP++]; +.Lno_dcache_b: + R7 = [SP++]; + RTS; + +/* Invalidate the Entire Instruction cache by + * disabling IMC bit + */ +ENTRY(_icache_invalidate) +ENTRY(_invalidate_entire_icache) + [--SP] = ( R7:5); + + P0.L = (IMEM_CONTROL & 0xFFFF); + P0.H = (IMEM_CONTROL >> 16); + R7 = [P0]; + + /* Clear the IMC bit , All valid bits in the instruction + * cache are set to the invalid state + */ + BITCLR(R7,IMC_P); + CLI R6; + SSYNC; /* SSYNC required before invalidating cache. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + /* Configures the instruction cache agian */ + R6 = (IMC | ENICPLB); + R7 = R7 | R6; + + CLI R6; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + ( R7:5) = [SP++]; + RTS; + +/* + * blackfin_cache_flush_range(start, end) + * Invalidate all cache lines assocoiated with this + * area of memory. + * + * start: Start address + * end: End address + */ +ENTRY(_blackfin_icache_flush_range) + R2 = -L1_CACHE_BYTES; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; + IFLUSH [P0]; +1: + IFLUSH [P0++]; + CC = P0 < P1 (iu); + IF CC JUMP 1b (bp); + IFLUSH [P0]; + SSYNC; + RTS; + +/* + * blackfin_icache_dcache_flush_range(start, end) + * FLUSH all cache lines assocoiated with this + * area of memory. + * + * start: Start address + * end: End address + */ + +ENTRY(_blackfin_icache_dcache_flush_range) + R2 = -L1_CACHE_BYTES; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; + IFLUSH [P0]; +1: + FLUSH [P0]; + IFLUSH [P0++]; + CC = P0 < P1 (iu); + IF CC JUMP 1b (bp); + IFLUSH [P0]; + FLUSH [P0]; + SSYNC; + RTS; + +/* Throw away all D-cached data in specified region without any obligation to + * write them back. However, we must clean the D-cached entries around the + * boundaries of the start and/or end address is not cache aligned. + * + * Start: start address, + * end : end address. + */ + +ENTRY(_blackfin_dcache_invalidate_range) + R2 = -L1_CACHE_BYTES; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; + FLUSHINV[P0]; +1: + FLUSHINV[P0++]; + CC = P0 < P1 (iu); + IF CC JUMP 1b (bp); + + /* If the data crosses a cache line, then we'll be pointing to + * the last cache line, but won't have flushed/invalidated it yet, + * so do one more. + */ + FLUSHINV[P0]; + SSYNC; + RTS; + +/* Invalidate the Entire Data cache by + * clearing DMC[1:0] bits + */ +ENTRY(_invalidate_entire_dcache) +ENTRY(_dcache_invalidate) + [--SP] = ( R7:6); + + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + R7 = [P0]; + + /* Clear the DMC[1:0] bits, All valid bits in the data + * cache are set to the invalid state + */ + BITCLR(R7,DMC0_P); + BITCLR(R7,DMC1_P); + CLI R6; + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + /* Configures the data cache again */ + + R6 = DMEM_CNTR; + R7 = R7 | R6; + + CLI R6; + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + ( R7:6) = [SP++]; + RTS; + +ENTRY(_blackfin_dcache_flush_range) + R2 = -L1_CACHE_BYTES; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; + FLUSH[P0]; +1: + FLUSH[P0++]; + CC = P0 < P1 (iu); + IF CC JUMP 1b (bp); + + /* If the data crosses a cache line, then we'll be pointing to + * the last cache line, but won't have flushed it yet, so do + * one more. + */ + FLUSH[P0]; + SSYNC; + RTS; + +ENTRY(_blackfin_dflush_page) + P1 = 1 << (PAGE_SHIFT - L1_CACHE_SHIFT); + P0 = R0; + CSYNC; + FLUSH[P0]; + LSETUP (.Lfl1, .Lfl1) LC0 = P1; +.Lfl1: FLUSH [P0++]; + SSYNC; + RTS; diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S new file mode 100644 index 0000000000..8c17f099e5 --- /dev/null +++ b/arch/blackfin/mach-common/cacheinit.S @@ -0,0 +1,137 @@ +/* + * File: arch/blackfin/mach-common/cacheinit.S + * Based on: + * Author: LG Soft India + * + * Created: ? + * Description: cache initialization + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This function sets up the data and instruction cache. The + * tables like icplb table, dcplb table and Page Descriptor table + * are defined in cplbtab.h. You can configure those tables for + * your suitable requirements + */ + +#include +#include + +.text + +#if defined(CONFIG_BLKFIN_CACHE) +ENTRY(_bfin_icache_init) + + /* Initialize Instruction CPLBS */ + + I0.L = (ICPLB_ADDR0 & 0xFFFF); + I0.H = (ICPLB_ADDR0 >> 16); + + I1.L = (ICPLB_DATA0 & 0xFFFF); + I1.H = (ICPLB_DATA0 >> 16); + + I2.L = _icplb_table; + I2.H = _icplb_table; + + r1 = -1; /* end point comparison */ + r3 = 15; /* max counter */ + +/* read entries from table */ + +.Lread_iaddr: + R0 = [I2++]; + CC = R0 == R1; + IF CC JUMP .Lidone; + [I0++] = R0; + +.Lread_idata: + R2 = [I2++]; + [I1++] = R2; + R3 = R3 + R1; + CC = R3 == R1; + IF !CC JUMP .Lread_iaddr; + +.Lidone: + /* Enable Instruction Cache */ + P0.l = (IMEM_CONTROL & 0xFFFF); + P0.h = (IMEM_CONTROL >> 16); + R1 = [P0]; + R0 = (IMC | ENICPLB); + R0 = R0 | R1; + + /* Anomaly 05000125 */ + CLI R2; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P0] = R0; + SSYNC; + STI R2; + RTS; +#endif + +#if defined(CONFIG_BLKFIN_DCACHE) +ENTRY(_bfin_dcache_init) + + /* Initialize Data CPLBS */ + + I0.L = (DCPLB_ADDR0 & 0xFFFF); + I0.H = (DCPLB_ADDR0 >> 16); + + I1.L = (DCPLB_DATA0 & 0xFFFF); + I1.H = (DCPLB_DATA0 >> 16); + + I2.L = _dcplb_table; + I2.H = _dcplb_table; + + R1 = -1; /* end point comparison */ + R3 = 15; /* max counter */ + + /* read entries from table */ +.Lread_daddr: + R0 = [I2++]; + cc = R0 == R1; + IF CC JUMP .Lddone; + [I0++] = R0; + +.Lread_ddata: + R2 = [I2++]; + [I1++] = R2; + R3 = R3 + R1; + CC = R3 == R1; + IF !CC JUMP .Lread_daddr; +.Lddone: + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + R1 = [P0]; + + R0 = DMEM_CNTR; + + R0 = R0 | R1; + /* Anomaly 05000125 */ + CLI R2; + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P0] = R0; + SSYNC; + STI R2; + RTS; +#endif diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/mach-common/cplbhdlr.S new file mode 100644 index 0000000000..b979067c49 --- /dev/null +++ b/arch/blackfin/mach-common/cplbhdlr.S @@ -0,0 +1,130 @@ +/* + * File: arch/blackfin/mach-common/cplbhdlr.S + * Based on: + * Author: LG Soft India + * + * Created: ? + * Description: CPLB exception handler + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 +.section .l1.text +#else +.text +#endif + +.type _cplb_mgr, STT_FUNC; +.type _panic_cplb_error, STT_FUNC; + +.align 2 + +.global __cplb_hdr; +.type __cplb_hdr, STT_FUNC; +ENTRY(__cplb_hdr) + R2 = SEQSTAT; + + /* Mask the contents of SEQSTAT and leave only EXCAUSE in R2 */ + R2 <<= 26; + R2 >>= 26; + + R1 = 0x23; /* Data access CPLB protection violation */ + CC = R2 == R1; + IF !CC JUMP .Lnot_data_write; + R0 = 2; /* is a write to data space*/ + JUMP .Lis_icplb_miss; + +.Lnot_data_write: + R1 = 0x2C; /* CPLB miss on an instruction fetch */ + CC = R2 == R1; + R0 = 0; /* is_data_miss == False*/ + IF CC JUMP .Lis_icplb_miss; + + R1 = 0x26; + CC = R2 == R1; + IF !CC JUMP .Lunknown; + + R0 = 1; /* is_data_miss == True*/ + +.Lis_icplb_miss: + +#if defined(CONFIG_BLKFIN_CACHE) || defined(CONFIG_BLKFIN_DCACHE) +# if defined(CONFIG_BLKFIN_CACHE) && !defined(CONFIG_BLKFIN_DCACHE) + R1 = CPLB_ENABLE_ICACHE; +# endif +# if !defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE) + R1 = CPLB_ENABLE_DCACHE; +# endif +# if defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE) + R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; +# endif +#else + R1 = 0; +#endif + + [--SP] = RETS; + CALL _cplb_mgr; + RETS = [SP++]; + CC = R0 == 0; + IF !CC JUMP .Lnot_replaced; + RTS; + +/* + * Diagnostic exception handlers + */ +.Lunknown: + R0 = CPLB_UNKNOWN_ERR; + JUMP .Lcplb_error; + +.Lnot_replaced: + CC = R0 == CPLB_NO_UNLOCKED; + IF !CC JUMP .Lnext_check; + R0 = CPLB_NO_UNLOCKED; + JUMP .Lcplb_error; + +.Lnext_check: + CC = R0 == CPLB_NO_ADDR_MATCH; + IF !CC JUMP .Lnext_check2; + R0 = CPLB_NO_ADDR_MATCH; + JUMP .Lcplb_error; + +.Lnext_check2: + CC = R0 == CPLB_PROT_VIOL; + IF !CC JUMP .Lstrange_return_from_cplb_mgr; + R0 = CPLB_PROT_VIOL; + JUMP .Lcplb_error; + +.Lstrange_return_from_cplb_mgr: + IDLE; + CSYNC; + JUMP .Lstrange_return_from_cplb_mgr; + +.Lcplb_error: + R1 = sp; + SP += -12; + call _panic_cplb_error; + SP += 12; + JUMP _handle_bad_cplb; diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/mach-common/cplbinfo.c new file mode 100644 index 0000000000..d65fac39d1 --- /dev/null +++ b/arch/blackfin/mach-common/cplbinfo.c @@ -0,0 +1,211 @@ +/* + * File: arch/blackfin/mach-common/cplbinfo.c + * Based on: + * Author: Sonic Zhang + * + * Created: Jan. 2005 + * Description: Display CPLB status + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#define CPLB_I 1 +#define CPLB_D 2 + +#define SYNC_SYS SSYNC() +#define SYNC_CORE CSYNC() + +#define CPLB_BIT_PAGESIZE 0x30000 + +static int page_size_table[4] = { + 0x00000400, /* 1K */ + 0x00001000, /* 4K */ + 0x00100000, /* 1M */ + 0x00400000 /* 4M */ +}; + +static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; + +static int cplb_find_entry(unsigned long *cplb_addr, + unsigned long *cplb_data, unsigned long addr, + unsigned long data) +{ + int ii; + + for (ii = 0; ii < 16; ii++) + if (addr >= cplb_addr[ii] && addr < cplb_addr[ii] + + page_size_table[(cplb_data[ii] & CPLB_BIT_PAGESIZE) >> 16] + && (cplb_data[ii] == data)) + return ii; + + return -1; +} + +static char *cplb_print_entry(char *buf, int type) +{ + unsigned long *p_addr = dpdt_table; + unsigned long *p_data = dpdt_table + 1; + unsigned long *p_icount = dpdt_swapcount_table; + unsigned long *p_ocount = dpdt_swapcount_table + 1; + unsigned long *cplb_addr = (unsigned long *)DCPLB_ADDR0; + unsigned long *cplb_data = (unsigned long *)DCPLB_DATA0; + int entry = 0, used_cplb = 0; + + if (type == CPLB_I) { + buf += sprintf(buf, "Instrction CPLB entry:\n"); + p_addr = ipdt_table; + p_data = ipdt_table + 1; + p_icount = ipdt_swapcount_table; + p_ocount = ipdt_swapcount_table + 1; + cplb_addr = (unsigned long *)ICPLB_ADDR0; + cplb_data = (unsigned long *)ICPLB_DATA0; + } else + buf += sprintf(buf, "Data CPLB entry:\n"); + + buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\ +\tiCount\toCount\n"); + + while (*p_addr != 0xffffffff) { + entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data); + if (entry >= 0) + used_cplb |= 1 << entry; + + buf += + sprintf(buf, + "0x%08lx\t0x%05lx\t%s\t%c\t%c\t%2d\t%ld\t%ld\n", + *p_addr, *p_data, + page_size_string_table[(*p_data & 0x30000) >> 16], + (*p_data & CPLB_VALID) ? 'Y' : 'N', + (*p_data & CPLB_LOCK) ? 'Y' : 'N', entry, *p_icount, + *p_ocount); + + p_addr += 2; + p_data += 2; + p_icount += 2; + p_ocount += 2; + } + + if (used_cplb != 0xffff) { + buf += sprintf(buf, "Unused/mismatched CPLBs:\n"); + + for (entry = 0; entry < 16; entry++) + if (0 == ((1 << entry) & used_cplb)) { + int flags = cplb_data[entry]; + buf += + sprintf(buf, + "%2d: 0x%08lx\t0x%05x\t%s\t%c\t%c\n", + entry, cplb_addr[entry], flags, + page_size_string_table[(flags & + 0x30000) >> + 16], + (flags & CPLB_VALID) ? 'Y' : 'N', + (flags & CPLB_LOCK) ? 'Y' : 'N'); + } + } + + buf += sprintf(buf, "\n"); + + return buf; +} + +static int cplbinfo_proc_output(char *buf) +{ + char *p; + + p = buf; + + p += sprintf(p, + "------------------ CPLB Information ------------------\n\n"); + + if (bfin_read_IMEM_CONTROL() & ENICPLB) + p = cplb_print_entry(p, CPLB_I); + else + p += sprintf(p, "Instruction CPLB is disabled.\n\n"); + + if (bfin_read_DMEM_CONTROL() & ENDCPLB) + p = cplb_print_entry(p, CPLB_D); + else + p += sprintf(p, "Data CPLB is disabled.\n"); + + return p - buf; +} + +static int cplbinfo_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + + len = cplbinfo_proc_output(page); + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + return len; +} + +static int cplbinfo_write_proc(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + printk(KERN_INFO "Reset the CPLB swap in/out counts.\n"); + memset(ipdt_swapcount_table, 0, MAX_SWITCH_I_CPLBS * sizeof(unsigned long)); + memset(dpdt_swapcount_table, 0, MAX_SWITCH_D_CPLBS * sizeof(unsigned long)); + + return count; +} + +static int __init cplbinfo_init(void) +{ + struct proc_dir_entry *entry; + + if ((entry = create_proc_entry("cplbinfo", 0, NULL)) == NULL) { + return -ENOMEM; + } + + entry->read_proc = cplbinfo_read_proc; + entry->write_proc = cplbinfo_write_proc; + entry->data = NULL; + + return 0; +} + +static void __exit cplbinfo_exit(void) +{ + remove_proc_entry("cplbinfo", NULL); +} + +module_init(cplbinfo_init); +module_exit(cplbinfo_exit); diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S new file mode 100644 index 0000000000..f5efc4bc65 --- /dev/null +++ b/arch/blackfin/mach-common/cplbmgr.S @@ -0,0 +1,607 @@ +/* + * File: arch/blackfin/mach-common/cplbmgtr.S + * Based on: + * Author: LG Soft India + * + * Created: ? + * Description: CPLB replacement routine for CPLB mismatch + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Usage: int _cplb_mgr(is_data_miss,int enable_cache) + * is_data_miss==2 => Mark as Dirty, write to the clean data page + * is_data_miss==1 => Replace a data CPLB. + * is_data_miss==0 => Replace an instruction CPLB. + * + * Returns: + * CPLB_RELOADED => Successfully updated CPLB table. + * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted. + * This indicates that the CPLBs in the configuration + * tablei are badly configured, as this should never + * occur. + * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the + * exception, is not covered by any of the CPLBs in + * the configuration table. The application is + * presumably misbehaving. + * CPLB_PROT_VIOL => The address being accessed, that triggered the + * exception, was not a first-write to a clean Write + * Back Data page, and so presumably is a genuine + * violation of the page's protection attributes. + * The application is misbehaving. + */ + +#include +#include +#include + +#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 +.section .l1.text +#else +.text +#endif + +.align 2; +ENTRY(_cplb_mgr) + + [--SP]=( R7:4,P5:3 ); + + CC = R0 == 2; + IF CC JUMP .Ldcplb_write; + + CC = R0 == 0; + IF !CC JUMP .Ldcplb_miss_compare; + + /* ICPLB Miss Exception. We need to choose one of the + * currently-installed CPLBs, and replace it with one + * from the configuration table. + */ + + P4.L = (ICPLB_FAULT_ADDR & 0xFFFF); + P4.H = (ICPLB_FAULT_ADDR >> 16); + + P1 = 16; + P5.L = _page_size_table; + P5.H = _page_size_table; + + P0.L = (ICPLB_DATA0 & 0xFFFF); + P0.H = (ICPLB_DATA0 >> 16); + R4 = [P4]; /* Get faulting address*/ + R6 = 64; /* Advance past the fault address, which*/ + R6 = R6 + R4; /* we'll use if we find a match*/ + R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/ + + R5 = 0; +.Lisearch: + + R1 = [P0-0x100]; /* Address for this CPLB */ + + R0 = [P0++]; /* Info for this CPLB*/ + CC = BITTST(R0,0); /* Is the CPLB valid?*/ + IF !CC JUMP .Lnomatch; /* Skip it, if not.*/ + CC = R4 < R1(IU); /* If fault address less than page start*/ + IF CC JUMP .Lnomatch; /* then skip this one.*/ + R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/ + P1 = R2; + P1 = P5 + (P1<<2); /* index into page-size table*/ + R2 = [P1]; /* Get the page size*/ + R1 = R1 + R2; /* and add to page start, to get page end*/ + CC = R4 < R1(IU); /* and see whether fault addr is in page.*/ + IF !CC R4 = R6; /* If so, advance the address and finish loop.*/ + IF !CC JUMP .Lisearch_done; +.Lnomatch: + /* Go around again*/ + R5 += 1; + CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/ + IF !CC JUMP .Lisearch; + +.Lisearch_done: + I0 = R4; /* Fault address we'll search for*/ + + /* set up pointers */ + P0.L = (ICPLB_DATA0 & 0xFFFF); + P0.H = (ICPLB_DATA0 >> 16); + + /* The replacement procedure for ICPLBs */ + + P4.L = (IMEM_CONTROL & 0xFFFF); + P4.H = (IMEM_CONTROL >> 16); + + /* disable cplbs */ + R5 = [P4]; /* Control Register*/ + BITCLR(R5,ENICPLB_P); + CLI R1; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R1; + + R1 = -1; /* end point comparison */ + R3 = 16; /* counter */ + + /* Search through CPLBs for first non-locked entry */ + /* Overwrite it by moving everyone else up by 1 */ +.Licheck_lock: + R0 = [P0++]; + R3 = R3 + R1; + CC = R3 == R1; + IF CC JUMP .Lall_locked; + CC = BITTST(R0, 0); /* an invalid entry is good */ + IF !CC JUMP .Lifound_victim; + CC = BITTST(R0,1); /* but a locked entry isn't */ + IF CC JUMP .Licheck_lock; + +.Lifound_victim: +#ifdef CONFIG_CPLB_INFO + R7 = [P0 - 0x104]; + P2.L = _ipdt_table; + P2.H = _ipdt_table; + P3.L = _ipdt_swapcount_table; + P3.H = _ipdt_swapcount_table; + P3 += -4; +.Licount: + R2 = [P2]; /* address from config table */ + P2 += 8; + P3 += 8; + CC = R2==-1; + IF CC JUMP .Licount_done; + CC = R7==R2; + IF !CC JUMP .Licount; + R7 = [P3]; + R7 += 1; + [P3] = R7; + CSYNC; +.Licount_done: +#endif + LC0=R3; + LSETUP(.Lis_move,.Lie_move) LC0; +.Lis_move: + R0 = [P0]; + [P0 - 4] = R0; + R0 = [P0 - 0x100]; + [P0-0x104] = R0; +.Lie_move:P0+=4; + + /* We've made space in the ICPLB table, so that ICPLB15 + * is now free to be overwritten. Next, we have to determine + * which CPLB we need to install, from the configuration + * table. This is a matter of getting the start-of-page + * addresses and page-lengths from the config table, and + * determining whether the fault address falls within that + * range. + */ + + P2.L = _ipdt_table; + P2.H = _ipdt_table; +#ifdef CONFIG_CPLB_INFO + P3.L = _ipdt_swapcount_table; + P3.H = _ipdt_swapcount_table; + P3 += -8; +#endif + P0.L = _page_size_table; + P0.H = _page_size_table; + + /* Retrieve our fault address (which may have been advanced + * because the faulting instruction crossed a page boundary). + */ + + R0 = I0; + + /* An extraction pattern, to get the page-size bits from + * the CPLB data entry. Bits 16-17, so two bits at posn 16. + */ + + R1 = ((16<<8)|2); +.Linext: R4 = [P2++]; /* address from config table */ + R2 = [P2++]; /* data from config table */ +#ifdef CONFIG_CPLB_INFO + P3 += 8; +#endif + + CC = R4 == -1; /* End of config table*/ + IF CC JUMP .Lno_page_in_table; + + /* See if failed address > start address */ + CC = R4 <= R0(IU); + IF !CC JUMP .Linext; + + /* extract page size (17:16)*/ + R3 = EXTRACT(R2, R1.L) (Z); + + /* add page size to addr to get range */ + + P5 = R3; + P5 = P0 + (P5 << 2); /* scaled, for int access*/ + R3 = [P5]; + R3 = R3 + R4; + + /* See if failed address < (start address + page size) */ + CC = R0 < R3(IU); + IF !CC JUMP .Linext; + + /* We've found a CPLB in the config table that covers + * the faulting address, so install this CPLB into the + * last entry of the table. + */ + + P1.L = (ICPLB_DATA15 & 0xFFFF); /* ICPLB_DATA15 */ + P1.H = (ICPLB_DATA15 >> 16); + [P1] = R2; + [P1-0x100] = R4; +#ifdef CONFIG_CPLB_INFO + R3 = [P3]; + R3 += 1; + [P3] = R3; +#endif + + /* P4 points to IMEM_CONTROL, and R5 contains its old + * value, after we disabled ICPLBS. Re-enable them. + */ + + BITSET(R5,ENICPLB_P); + CLI R2; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R2; + + ( R7:4,P5:3 ) = [SP++]; + R0 = CPLB_RELOADED; + RTS; + +/* FAILED CASES*/ +.Lno_page_in_table: + ( R7:4,P5:3 ) = [SP++]; + R0 = CPLB_NO_ADDR_MATCH; + RTS; +.Lall_locked: + ( R7:4,P5:3 ) = [SP++]; + R0 = CPLB_NO_UNLOCKED; + RTS; +.Lprot_violation: + ( R7:4,P5:3 ) = [SP++]; + R0 = CPLB_PROT_VIOL; + RTS; + +.Ldcplb_write: + + /* if a DCPLB is marked as write-back (CPLB_WT==0), and + * it is clean (CPLB_DIRTY==0), then a write to the + * CPLB's page triggers a protection violation. We have to + * mark the CPLB as dirty, to indicate that there are + * pending writes associated with the CPLB. + */ + + P4.L = (DCPLB_STATUS & 0xFFFF); + P4.H = (DCPLB_STATUS >> 16); + P3.L = (DCPLB_DATA0 & 0xFFFF); + P3.H = (DCPLB_DATA0 >> 16); + R5 = [P4]; + + /* A protection violation can be caused by more than just writes + * to a clean WB page, so we have to ensure that: + * - It's a write + * - to a clean WB page + * - and is allowed in the mode the access occurred. + */ + + CC = BITTST(R5, 16); /* ensure it was a write*/ + IF !CC JUMP .Lprot_violation; + + /* to check the rest, we have to retrieve the DCPLB.*/ + + /* The low half of DCPLB_STATUS is a bit mask*/ + + R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/ + R3 = 30; /* so we can use this to determine the offset*/ + R2.L = SIGNBITS R2; + R2 = R2.L (Z); /* into the DCPLB table.*/ + R3 = R3 - R2; + P4 = R3; + P3 = P3 + (P4<<2); + R3 = [P3]; /* Retrieve the CPLB*/ + + /* Now we can check whether it's a clean WB page*/ + + CC = BITTST(R3, 14); /* 0==WB, 1==WT*/ + IF CC JUMP .Lprot_violation; + CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/ + IF CC JUMP .Lprot_violation; + + /* Check whether the write is allowed in the mode that was active.*/ + + R2 = 1<<3; /* checking write in user mode*/ + CC = BITTST(R5, 17); /* 0==was user, 1==was super*/ + R5 = CC; + R2 <<= R5; /* if was super, check write in super mode*/ + R2 = R3 & R2; + CC = R2 == 0; + IF CC JUMP .Lprot_violation; + + /* It's a genuine write-to-clean-page.*/ + + BITSET(R3, 7); /* mark as dirty*/ + [P3] = R3; /* and write back.*/ + NOP; + CSYNC; + ( R7:4,P5:3 ) = [SP++]; + R0 = CPLB_RELOADED; + RTS; + +.Ldcplb_miss_compare: + + /* Data CPLB Miss event. We need to choose a CPLB to + * evict, and then locate a new CPLB to install from the + * config table, that covers the faulting address. + */ + + P1.L = (DCPLB_DATA15 & 0xFFFF); + P1.H = (DCPLB_DATA15 >> 16); + + P4.L = (DCPLB_FAULT_ADDR & 0xFFFF); + P4.H = (DCPLB_FAULT_ADDR >> 16); + R4 = [P4]; + I0 = R4; + + /* The replacement procedure for DCPLBs*/ + + R6 = R1; /* Save for later*/ + + /* Turn off CPLBs while we work.*/ + P4.L = (DMEM_CONTROL & 0xFFFF); + P4.H = (DMEM_CONTROL >> 16); + R5 = [P4]; + BITCLR(R5,ENDCPLB_P); + CLI R0; + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R0; + + /* Start looking for a CPLB to evict. Our order of preference + * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs + * are no good. + */ + + I1.L = (DCPLB_DATA0 & 0xFFFF); + I1.H = (DCPLB_DATA0 >> 16); + P1 = 2; + P2 = 16; + I2.L = _dcplb_preference; + I2.H = _dcplb_preference; + LSETUP(.Lsdsearch1, .Ledsearch1) LC0 = P1; +.Lsdsearch1: + R0 = [I2++]; /* Get the bits we're interested in*/ + P0 = I1; /* Go back to start of table*/ + LSETUP (.Lsdsearch2, .Ledsearch2) LC1 = P2; +.Lsdsearch2: + R1 = [P0++]; /* Fetch each installed CPLB in turn*/ + R2 = R1 & R0; /* and test for interesting bits.*/ + CC = R2 == 0; /* If none are set, it'll do.*/ + IF !CC JUMP .Lskip_stack_check; + + R2 = [P0 - 0x104]; /* R2 - PageStart */ + P3.L = _page_size_table; /* retrieve end address */ + P3.H = _page_size_table; /* retrieve end address */ + R3 = 0x1002; /* 16th - position, 2 bits -length */ +#ifdef ANOMALY_05000209 + nop; /* Anomaly 05000209 */ +#endif + R7 = EXTRACT(R1,R3.l); + R7 = R7 << 2; /* Page size index offset */ + P5 = R7; + P3 = P3 + P5; + R7 = [P3]; /* page size in bytes */ + + R7 = R2 + R7; /* R7 - PageEnd */ + R4 = SP; /* Test SP is in range */ + + CC = R7 < R4; /* if PageEnd < SP */ + IF CC JUMP .Ldfound_victim; + R3 = 0x284; /* stack length from start of trap till + * the point. + * 20 stack locations for future modifications + */ + R4 = R4 + R3; + CC = R4 < R2; /* if SP + stacklen < PageStart */ + IF CC JUMP .Ldfound_victim; +.Lskip_stack_check: + +.Ledsearch2: NOP; +.Ledsearch1: NOP; + + /* If we got here, we didn't find a DCPLB we considered + * replacable, which means all of them were locked. + */ + + JUMP .Lall_locked; +.Ldfound_victim: + +#ifdef CONFIG_CPLB_INFO + R7 = [P0 - 0x104]; + P2.L = _dpdt_table; + P2.H = _dpdt_table; + P3.L = _dpdt_swapcount_table; + P3.H = _dpdt_swapcount_table; + P3 += -4; +.Ldicount: + R2 = [P2]; + P2 += 8; + P3 += 8; + CC = R2==-1; + IF CC JUMP .Ldicount_done; + CC = R7==R2; + IF !CC JUMP .Ldicount; + R7 = [P3]; + R7 += 1; + [P3] = R7; +.Ldicount_done: +#endif + + /* Clean down the hardware loops*/ + R2 = 0; + LC1 = R2; + LC0 = R2; + + /* There's a suitable victim in [P0-4] (because we've + * advanced already). + */ + +.LDdoverwrite: + + /* [P0-4] is a suitable victim CPLB, so we want to + * overwrite it by moving all the following CPLBs + * one space closer to the start. + */ + + R1.L = (DCPLB_DATA16 & 0xFFFF); /* DCPLB_DATA15 + 4 */ + R1.H = (DCPLB_DATA16 >> 16); + R0 = P0; + + /* If the victim happens to be in DCPLB15, + * we don't need to move anything. + */ + + CC = R1 == R0; + IF CC JUMP .Lde_moved; + R1 = R1 - R0; + R1 >>= 2; + P1 = R1; + LSETUP(.Lds_move, .Lde_move) LC0=P1; +.Lds_move: + R0 = [P0++]; /* move data */ + [P0 - 8] = R0; + R0 = [P0-0x104] /* move address */ +.Lde_move: [P0-0x108] = R0; + + /* We've now made space in DCPLB15 for the new CPLB to be + * installed. The next stage is to locate a CPLB in the + * config table that covers the faulting address. + */ + +.Lde_moved:NOP; + R0 = I0; /* Our faulting address */ + + P2.L = _dpdt_table; + P2.H = _dpdt_table; +#ifdef CONFIG_CPLB_INFO + P3.L = _dpdt_swapcount_table; + P3.H = _dpdt_swapcount_table; + P3 += -8; +#endif + + P1.L = _page_size_table; + P1.H = _page_size_table; + + /* An extraction pattern, to retrieve bits 17:16.*/ + + R1 = (16<<8)|2; +.Ldnext: R4 = [P2++]; /* address */ + R2 = [P2++]; /* data */ +#ifdef CONFIG_CPLB_INFO + P3 += 8; +#endif + + CC = R4 == -1; + IF CC JUMP .Lno_page_in_table; + + /* See if failed address > start address */ + CC = R4 <= R0(IU); + IF !CC JUMP .Ldnext; + + /* extract page size (17:16)*/ + R3 = EXTRACT(R2, R1.L) (Z); + + /* add page size to addr to get range */ + + P5 = R3; + P5 = P1 + (P5 << 2); + R3 = [P5]; + R3 = R3 + R4; + + /* See if failed address < (start address + page size) */ + CC = R0 < R3(IU); + IF !CC JUMP .Ldnext; + + /* We've found the CPLB that should be installed, so + * write it into CPLB15, masking off any caching bits + * if necessary. + */ + + P1.L = (DCPLB_DATA15 & 0xFFFF); + P1.H = (DCPLB_DATA15 >> 16); + + /* If the DCPLB has cache bits set, but caching hasn't + * been enabled, then we want to mask off the cache-in-L1 + * bit before installing. Moreover, if caching is off, we + * also want to ensure that the DCPLB has WT mode set, rather + * than WB, since WB pages still trigger first-write exceptions + * even when not caching is off, and the page isn't marked as + * cachable. Finally, we could mark the page as clean, not dirty, + * but we choose to leave that decision to the user; if the user + * chooses to have a CPLB pre-defined as dirty, then they always + * pay the cost of flushing during eviction, but don't pay the + * cost of first-write exceptions to mark the page as dirty. + */ + +#ifdef CONFIG_BLKFIN_WT + BITSET(R6, 14); /* Set WT*/ +#endif + + [P1] = R2; + [P1-0x100] = R4; +#ifdef CONFIG_CPLB_INFO + R3 = [P3]; + R3 += 1; + [P3] = R3; +#endif + + /* We've installed the CPLB, so re-enable CPLBs. P4 + * points to DMEM_CONTROL, and R5 is the value we + * last wrote to it, when we were disabling CPLBs. + */ + + BITSET(R5,ENDCPLB_P); + CLI R2; + .align 8; + [P4] = R5; + SSYNC; + STI R2; + + ( R7:4,P5:3 ) = [SP++]; + R0 = CPLB_RELOADED; + RTS; + +.data +.align 4; +_page_size_table: +.byte4 0x00000400; /* 1K */ +.byte4 0x00001000; /* 4K */ +.byte4 0x00100000; /* 1M */ +.byte4 0x00400000; /* 4M */ + +.align 4; +_dcplb_preference: +.byte4 0x00000001; /* valid bit */ +.byte4 0x00000002; /* lock bit */ diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S new file mode 100644 index 0000000000..97cdcd6a00 --- /dev/null +++ b/arch/blackfin/mach-common/dpmc.S @@ -0,0 +1,418 @@ +/* + * File: arch/blackfin/mach-common/dpmc.S + * Based on: + * Author: LG Soft India + * + * Created: ? + * Description: Watchdog Timer APIs + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +.text + +ENTRY(_unmask_wdog_wakeup_evt) + [--SP] = ( R7:0, P5:0 ); +#if defined(CONFIG_BF561) + P0.H = hi(SICA_IWR1); + P0.L = lo(SICA_IWR1); +#else + P0.h = (SIC_IWR >> 16); + P0.l = (SIC_IWR & 0xFFFF); +#endif + R7 = [P0]; +#if defined(CONFIG_BF561) + BITSET(R7, 27); +#else + BITSET(R7,(IRQ_WATCH - IVG7)); +#endif + [P0] = R7; + SSYNC; + + ( R7:0, P5:0 ) = [SP++]; + RTS; + +.LWRITE_TO_STAT: + /* When watch dog timer is enabled, a write to STAT will load the + * contents of CNT to STAT + */ + R7 = 0x0000(z); +#if defined(CONFIG_BF561) + P0.h = (WDOGA_STAT >> 16); + P0.l = (WDOGA_STAT & 0xFFFF); +#else + P0.h = (WDOG_STAT >> 16); + P0.l = (WDOG_STAT & 0xFFFF); +#endif + [P0] = R7; + SSYNC; + JUMP .LSKIP_WRITE_TO_STAT; + +ENTRY(_program_wdog_timer) + [--SP] = ( R7:0, P5:0 ); +#if defined(CONFIG_BF561) + P0.h = (WDOGA_CNT >> 16); + P0.l = (WDOGA_CNT & 0xFFFF); +#else + P0.h = (WDOG_CNT >> 16); + P0.l = (WDOG_CNT & 0xFFFF); +#endif + [P0] = R0; + SSYNC; + +#if defined(CONFIG_BF561) + P0.h = (WDOGA_CTL >> 16); + P0.l = (WDOGA_CTL & 0xFFFF); +#else + P0.h = (WDOG_CTL >> 16); + P0.l = (WDOG_CTL & 0xFFFF); +#endif + R7 = W[P0](Z); + CC = BITTST(R7,1); + if !CC JUMP .LWRITE_TO_STAT; + CC = BITTST(R7,2); + if !CC JUMP .LWRITE_TO_STAT; + +.LSKIP_WRITE_TO_STAT: +#if defined(CONFIG_BF561) + P0.h = (WDOGA_CTL >> 16); + P0.l = (WDOGA_CTL & 0xFFFF); +#else + P0.h = (WDOG_CTL >> 16); + P0.l = (WDOG_CTL & 0xFFFF); +#endif + R7 = W[P0](Z); + BITCLR(R7,1); /* Enable GP event */ + BITSET(R7,2); + W[P0] = R7.L; + SSYNC; + NOP; + + R7 = W[P0](Z); + BITCLR(R7,4); /* Enable the wdog counter */ + W[P0] = R7.L; + SSYNC; + + ( R7:0, P5:0 ) = [SP++]; + RTS; + +ENTRY(_clear_wdog_wakeup_evt) + [--SP] = ( R7:0, P5:0 ); + +#if defined(CONFIG_BF561) + P0.h = (WDOGA_CTL >> 16); + P0.l = (WDOGA_CTL & 0xFFFF); +#else + P0.h = (WDOG_CTL >> 16); + P0.l = (WDOG_CTL & 0xFFFF); +#endif + R7 = 0x0AD6(Z); + W[P0] = R7.L; + SSYNC; + + R7 = W[P0](Z); + BITSET(R7,15); + W[P0] = R7.L; + SSYNC; + + R7 = W[P0](Z); + BITSET(R7,1); + BITSET(R7,2); + W[P0] = R7.L; + SSYNC; + + ( R7:0, P5:0 ) = [SP++]; + RTS; + +ENTRY(_disable_wdog_timer) + [--SP] = ( R7:0, P5:0 ); +#if defined(CONFIG_BF561) + P0.h = (WDOGA_CTL >> 16); + P0.l = (WDOGA_CTL & 0xFFFF); +#else + P0.h = (WDOG_CTL >> 16); + P0.l = (WDOG_CTL & 0xFFFF); +#endif + R7 = 0xAD6(Z); + W[P0] = R7.L; + SSYNC; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +#if !defined(CONFIG_BF561) + +.section .l1.text + +ENTRY(_sleep_mode) + [--SP] = ( R7:0, P5:0 ); + [--SP] = RETS; + + call _set_sic_iwr; + + R0 = 0xFFFF (Z); + call _set_rtc_istat + + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + R1 = W[P0](z); + BITSET (R1, 3); + W[P0] = R1.L; + + CLI R2; + SSYNC; + IDLE; + STI R2; + + call _test_pll_locked; + + R0 = IWR_ENABLE(0); + call _set_sic_iwr; + + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + R7 = w[p0](z); + BITCLR (R7, 3); + BITCLR (R7, 5); + w[p0] = R7.L; + IDLE; + call _test_pll_locked; + + RETS = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +ENTRY(_hibernate_mode) + [--SP] = ( R7:0, P5:0 ); + [--SP] = RETS; + + call _set_sic_iwr; + + R0 = 0xFFFF (Z); + call _set_rtc_istat + + P0.H = hi(VR_CTL); + P0.L = lo(VR_CTL); + R1 = W[P0](z); + BITSET (R1, 8); + BITCLR (R1, 0); + BITCLR (R1, 1); + W[P0] = R1.L; + SSYNC; + + CLI R2; + IDLE; + + /* Actually, adding anything may not be necessary...SDRAM contents + * are lost + */ + +ENTRY(_deep_sleep) + [--SP] = ( R7:0, P5:0 ); + [--SP] = RETS; + + CLI R4; + + call _set_sic_iwr; + + call _set_sdram_srfs; + + /* Clear all the interrupts,bits sticky */ + R0 = 0xFFFF (Z); + call _set_rtc_istat + + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + R0 = W[P0](z); + BITSET (R0, 5); + W[P0] = R0.L; + + call _test_pll_locked; + + SSYNC; + IDLE; + + call _unset_sdram_srfs; + + call _test_pll_locked; + + R0 = IWR_ENABLE(0); + call _set_sic_iwr; + + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + R0 = w[p0](z); + BITCLR (R0, 3); + BITCLR (R0, 5); + BITCLR (R0, 8); + w[p0] = R0; + IDLE; + call _test_pll_locked; + + STI R4; + + RETS = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +ENTRY(_sleep_deeper) + [--SP] = ( R7:0, P5:0 ); + [--SP] = RETS; + + CLI R4; + + P3 = R0; + R0 = IWR_ENABLE(0); + call _set_sic_iwr; + call _set_sdram_srfs; + + /* Clear all the interrupts,bits sticky */ + R0 = 0xFFFF (Z); + call _set_rtc_istat + + P0.H = hi(PLL_DIV); + P0.L = lo(PLL_DIV); + R6 = W[P0](z); + R0.L = 0xF; + W[P0] = R0.l; + + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + R5 = W[P0](z); + R0.L = (MIN_VC/CONFIG_CLKIN_HZ) << 9; + W[P0] = R0.l; + + SSYNC; + IDLE; + + call _test_pll_locked; + + P0.H = hi(VR_CTL); + P0.L = lo(VR_CTL); + R7 = W[P0](z); + R1 = 0x6; + R1 <<= 16; + R2 = 0x0404(Z); + R1 = R1|R2; + + R2 = DEPOSIT(R7, R1); + W[P0] = R2; + + SSYNC; + IDLE; + + call _test_pll_locked; + + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + R0 = W[P0](z); + BITSET (R0, 3); + W[P0] = R0.L; + + R0 = P3; + call _set_sic_iwr; + + SSYNC; + IDLE; + + call _test_pll_locked; + + R0 = IWR_ENABLE(0); + call _set_sic_iwr; + + P0.H = hi(VR_CTL); + P0.L = lo(VR_CTL); + W[P0]= R7; + + SSYNC; + IDLE; + + call _test_pll_locked; + + P0.H = hi(PLL_DIV); + P0.L = lo(PLL_DIV); + W[P0]= R6; + + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + w[p0] = R5; + IDLE; + call _test_pll_locked; + + call _unset_sdram_srfs; + + STI R4; + + RETS = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +ENTRY(_set_sdram_srfs) + /* set the sdram to self refresh mode */ + P0.H = hi(EBIU_SDGCTL); + P0.L = lo(EBIU_SDGCTL); + R2 = [P0]; + R3.H = hi(SRFS); + R3.L = lo(SRFS); + R2 = R2|R3; + [P0] = R2; + ssync; + RTS; + +ENTRY(_unset_sdram_srfs) + /* set the sdram out of self refresh mode */ + P0.H = hi(EBIU_SDGCTL); + P0.L = lo(EBIU_SDGCTL); + R2 = [P0]; + R3.H = hi(SRFS); + R3.L = lo(SRFS); + R3 = ~R3; + R2 = R2&R3; + [P0] = R2; + ssync; + RTS; + +ENTRY(_set_sic_iwr) + P0.H = hi(SIC_IWR); + P0.L = lo(SIC_IWR); + [P0] = R0; + SSYNC; + RTS; + +ENTRY(_set_rtc_istat) + P0.H = hi(RTC_ISTAT); + P0.L = lo(RTC_ISTAT); + w[P0] = R0.L; + SSYNC; + RTS; + +ENTRY(_test_pll_locked) + P0.H = hi(PLL_STAT); + P0.L = lo(PLL_STAT); +1: + R0 = W[P0] (Z); + CC = BITTST(R0,5); + IF !CC JUMP 1b; + RTS; +#endif diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S new file mode 100644 index 0000000000..8eb0a90234 --- /dev/null +++ b/arch/blackfin/mach-common/entry.S @@ -0,0 +1,1207 @@ +/* + * File: arch/blackfin/mach-common/entry.S + * Based on: + * Author: Linus Torvalds + * + * Created: ? + * Description: contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all + * interrupts and faults that can result in a task-switch. + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * 25-Dec-2004 - LG Soft India + * 1. Fix in return_from_int, to make sure any pending + * system call in ILAT for this process to get + * executed, otherwise in case context switch happens, + * system call of first process (i.e in ILAT) will be + * carried forward to the switched process. + * 2. Removed Constant references for the following + * a. IPEND + * b. EXCAUSE mask + * c. PAGE Mask + */ + +/* + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + */ + + +#include +#include +#include +#include +#include /* TIF_NEED_RESCHED */ +#include + +#include + +#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE + /* + * TODO: this should be proper save/restore, but for now + * we'll just cheat and use 0x1/0x13 + */ +# define DEBUG_START_HWTRACE \ + P5.l = LO(TBUFCTL); \ + P5.h = HI(TBUFCTL); \ + R7 = 0x13; \ + [P5] = R7; +# define DEBUG_STOP_HWTRACE \ + P5.l = LO(TBUFCTL); \ + P5.h = HI(TBUFCTL); \ + R7 = 0x01; \ + [P5] = R7; +#else +# define DEBUG_START_HWTRACE +# define DEBUG_STOP_HWTRACE +#endif + +#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 +.section .l1.text +#else +.text +#endif + +/* Slightly simplified and streamlined entry point for CPLB misses. + * This one does not lower the level to IRQ5, and thus can be used to + * patch up CPLB misses on the kernel stack. + */ +ENTRY(_ex_dcplb) +#if defined(ANOMALY_05000261) + /* + * Work around an anomaly: if we see a new DCPLB fault, return + * without doing anything. Then, if we get the same fault again, + * handle it. + */ + p5.l = _last_cplb_fault_retx; + p5.h = _last_cplb_fault_retx; + r7 = [p5]; + r6 = retx; + [p5] = r6; + cc = r6 == r7; + if !cc jump _return_from_exception; + /* fall through */ +#endif + +ENTRY(_ex_icplb) + (R7:6,P5:4) = [sp++]; + ASTAT = [sp++]; + SAVE_ALL_SYS + call __cplb_hdr; + DEBUG_START_HWTRACE + RESTORE_ALL_SYS + SP = RETN; + rtx; + +ENTRY(_ex_spinlock) + /* Transform this into a syscall - twiddle the syscall vector. */ + p5.l = lo(EVT15); + p5.h = hi(EVT15); + r7.l = _spinlock_bh; + r7.h = _spinlock_bh; + [p5] = r7; + csync; + /* Fall through. */ + +ENTRY(_ex_syscall) + DEBUG_START_HWTRACE + (R7:6,P5:4) = [sp++]; + ASTAT = [sp++]; + raise 15; /* invoked by TRAP #0, for sys call */ + sp = retn; + rtx + +ENTRY(_spinlock_bh) + SAVE_ALL_SYS + /* To end up here, vector 15 was changed - so we have to change it + * back. + */ + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _evt_system_call; + p1.h = _evt_system_call; + [p0] = p1; + csync; + r0 = [sp + PT_R0]; + sp += -12; + call _sys_bfin_spinlock; + sp += 12; + [SP + PT_R0] = R0; + RESTORE_ALL_SYS + rti; + +ENTRY(_ex_soft_bp) + r7 = retx; + r7 += -2; + retx = r7; + jump.s _ex_trap_c; + +ENTRY(_ex_single_step) + r7 = retx; + r6 = reti; + cc = r7 == r6; + if cc jump _return_from_exception + r7 = syscfg; + bitclr (r7, 0); + syscfg = R7; + + p5.l = lo(IPEND); + p5.h = hi(IPEND); + r6 = [p5]; + cc = bittst(r6, 5); + if !cc jump _ex_trap_c; + p4.l = lo(EVT5); + p4.h = hi(EVT5); + r6.h = _exception_to_level5; + r6.l = _exception_to_level5; + r7 = [p4]; + cc = r6 == r7; + if !cc jump _ex_trap_c; + +_return_from_exception: + DEBUG_START_HWTRACE + (R7:6,P5:4) = [sp++]; + ASTAT = [sp++]; + sp = retn; + rtx; + +ENTRY(_handle_bad_cplb) + /* To get here, we just tried and failed to change a CPLB + * so, handle things in trap_c (C code), by lowering to + * IRQ5, just like we normally do. Since this is not a + * "normal" return path, we have a do alot of stuff to + * the stack to get ready so, we can fall through - we + * need to make a CPLB exception look like a normal exception + */ + + DEBUG_START_HWTRACE + RESTORE_ALL_SYS + [--sp] = ASTAT; + [--sp] = (R7:6, P5:4); + +ENTRY(_ex_trap_c) + /* Call C code (trap_c) to handle the exception, which most + * likely involves sending a signal to the current process. + * To avoid double faults, lower our priority to IRQ5 first. + */ + P5.h = _exception_to_level5; + P5.l = _exception_to_level5; + p4.l = lo(EVT5); + p4.h = hi(EVT5); + [p4] = p5; + csync; + + /* Disable all interrupts, but make sure level 5 is enabled so + * we can switch to that level. Save the old mask. */ + cli r6; + p4.l = _excpt_saved_imask; + p4.h = _excpt_saved_imask; + [p4] = r6; + r6 = 0x3f; + sti r6; + + /* Save the excause into a circular buffer, in case the instruction + * which caused this excecptions causes others. + */ + P5.l = _in_ptr_excause; + P5.h = _in_ptr_excause; + R7 = [P5]; + R7 += 4; + R6 = 0xF; + R7 = R7 & R6; + [P5] = R7; + R6.l = _excause_circ_buf; + R6.h = _excause_circ_buf; + R7 = R7 + R6; + p5 = R7; + R6 = SEQSTAT; + [P5] = R6; + + DEBUG_START_HWTRACE + (R7:6,P5:4) = [sp++]; + ASTAT = [sp++]; + SP = RETN; + raise 5; + rtx; + +ENTRY(_exception_to_level5) + SAVE_ALL_SYS + + /* Restore interrupt mask. We haven't pushed RETI, so this + * doesn't enable interrupts until we return from this handler. */ + p4.l = _excpt_saved_imask; + p4.h = _excpt_saved_imask; + r6 = [p4]; + sti r6; + + /* Restore the hardware error vector. */ + P5.h = _evt_ivhw; + P5.l = _evt_ivhw; + p4.l = lo(EVT5); + p4.h = hi(EVT5); + [p4] = p5; + csync; + + p2.l = lo(IPEND); + p2.h = hi(IPEND); + csync; + r0 = [p2]; /* Read current IPEND */ + [sp + PT_IPEND] = r0; /* Store IPEND */ + + /* Pop the excause from the circular buffer and push it on the stack + * (in the right place - if you change the location of SEQSTAT, you + * must change this offset. + */ +.L_excep_to_5_again: + P5.l = _out_ptr_excause; + P5.h = _out_ptr_excause; + R7 = [P5]; + R7 += 4; + R6 = 0xF; + R7 = R7 & R6; + [P5] = R7; + R6.l = _excause_circ_buf; + R6.h = _excause_circ_buf; + R7 = R7 + R6; + P5 = R7; + R1 = [P5]; + [SP + 8] = r1; + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + SP += -12; + call _trap_c; + SP += 12; + + /* See if anything else is in the exception buffer + * if there is, process it + */ + P5.l = _out_ptr_excause; + P5.h = _out_ptr_excause; + P4.l = _in_ptr_excause; + P4.h = _in_ptr_excause; + R6 = [P5]; + R7 = [P4]; + CC = R6 == R7; + if ! CC JUMP .L_excep_to_5_again + + call _ret_from_exception; + RESTORE_ALL_SYS + rti; + +ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ + /* Since the kernel stack can be anywhere, it's not guaranteed to be + * covered by a CPLB. Switch to an exception stack; use RETN as a + * scratch register (for want of a better option). + */ + retn = sp; + sp.l = _exception_stack_top; + sp.h = _exception_stack_top; + /* Try to deal with syscalls quickly. */ + [--sp] = ASTAT; + [--sp] = (R7:6, P5:4); + DEBUG_STOP_HWTRACE + r7 = SEQSTAT; /* reason code is in bit 5:0 */ + r6.l = lo(SEQSTAT_EXCAUSE); + r6.h = hi(SEQSTAT_EXCAUSE); + r7 = r7 & r6; + p5.h = _extable; + p5.l = _extable; + p4 = r7; + p5 = p5 + (p4 << 2); + p4 = [p5]; + jump (p4); + +.Lbadsys: + r7 = -ENOSYS; /* signextending enough */ + [sp + PT_R0] = r7; /* return value from system call */ + jump .Lsyscall_really_exit; + +ENTRY(_kernel_execve) + link SIZEOF_PTREGS; + p0 = sp; + r3 = SIZEOF_PTREGS / 4; + r4 = 0(x); +0: + [p0++] = r4; + r3 += -1; + cc = r3 == 0; + if !cc jump 0b (bp); + + p0 = sp; + sp += -16; + [sp + 12] = p0; + call _do_execve; + SP += 16; + cc = r0 == 0; + if ! cc jump 1f; + /* Success. Copy our temporary pt_regs to the top of the kernel + * stack and do a normal exception return. + */ + r1 = sp; + r0 = (-KERNEL_STACK_SIZE) (x); + r1 = r1 & r0; + p2 = r1; + p3 = [p2]; + r0 = KERNEL_STACK_SIZE - 4 (z); + p1 = r0; + p1 = p1 + p2; + + p0 = fp; + r4 = [p0--]; + r3 = SIZEOF_PTREGS / 4; +0: + r4 = [p0--]; + [p1--] = r4; + r3 += -1; + cc = r3 == 0; + if ! cc jump 0b (bp); + + r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z); + p1 = r0; + p1 = p1 + p2; + sp = p1; + r0 = syscfg; + [SP + PT_SYSCFG] = r0; + [p3 + (TASK_THREAD + THREAD_KSP)] = sp; + + RESTORE_CONTEXT; + rti; +1: + unlink; + rts; + +ENTRY(_system_call) + /* Store IPEND */ + p2.l = lo(IPEND); + p2.h = hi(IPEND); + csync; + r0 = [p2]; + [sp + PT_IPEND] = r0; + + /* Store RETS for now */ + r0 = rets; + [sp + PT_RESERVED] = r0; + /* Set the stack for the current process */ + r7 = sp; + r6.l = lo(ALIGN_PAGE_MASK); + r6.h = hi(ALIGN_PAGE_MASK); + r7 = r7 & r6; /* thread_info */ + p2 = r7; + p2 = [p2]; + + [p2+(TASK_THREAD+THREAD_KSP)] = sp; + + /* Check the System Call */ + r7 = __NR_syscall; + /* System call number is passed in P0 */ + r6 = p0; + cc = r6 < r7; + if ! cc jump .Lbadsys; + + /* are we tracing syscalls?*/ + r7 = sp; + r6.l = lo(ALIGN_PAGE_MASK); + r6.h = hi(ALIGN_PAGE_MASK); + r7 = r7 & r6; + p2 = r7; + r7 = [p2+TI_FLAGS]; + CC = BITTST(r7,TIF_SYSCALL_TRACE); + if CC JUMP _sys_trace; + + /* Execute the appropriate system call */ + + p4 = p0; + p5.l = _sys_call_table; + p5.h = _sys_call_table; + p5 = p5 + (p4 << 2); + r0 = [sp + PT_R0]; + r1 = [sp + PT_R1]; + r2 = [sp + PT_R2]; + p5 = [p5]; + + [--sp] = r5; + [--sp] = r4; + [--sp] = r3; + SP += -12; + call (p5); + SP += 24; + [sp + PT_R0] = r0; + +.Lresume_userspace: + r7 = sp; + r4.l = lo(ALIGN_PAGE_MASK); + r4.h = hi(ALIGN_PAGE_MASK); + r7 = r7 & r4; /* thread_info->flags */ + p5 = r7; +.Lresume_userspace_1: + /* Disable interrupts. */ + [--sp] = reti; + reti = [sp++]; + + r7 = [p5 + TI_FLAGS]; + r4.l = lo(_TIF_WORK_MASK); + r4.h = hi(_TIF_WORK_MASK); + r7 = r7 & r4; + +.Lsyscall_resched: + cc = BITTST(r7, TIF_NEED_RESCHED); + if !cc jump .Lsyscall_sigpending; + + /* Reenable interrupts. */ + [--sp] = reti; + r0 = [sp++]; + + SP += -12; + call _schedule; + SP += 12; + + jump .Lresume_userspace_1; + +.Lsyscall_sigpending: + cc = BITTST(r7, TIF_RESTORE_SIGMASK); + if cc jump .Lsyscall_do_signals; + cc = BITTST(r7, TIF_SIGPENDING); + if !cc jump .Lsyscall_really_exit; +.Lsyscall_do_signals: + /* Reenable interrupts. */ + [--sp] = reti; + r0 = [sp++]; + + r0 = sp; + SP += -12; + call _do_signal; + SP += 12; + +.Lsyscall_really_exit: + r5 = [sp + PT_RESERVED]; + rets = r5; + rts; + +_sys_trace: + call _syscall_trace; + + /* Execute the appropriate system call */ + + p4 = [SP + PT_P0]; + p5.l = _sys_call_table; + p5.h = _sys_call_table; + p5 = p5 + (p4 << 2); + r0 = [sp + PT_R0]; + r1 = [sp + PT_R1]; + r2 = [sp + PT_R2]; + r3 = [sp + PT_R3]; + r4 = [sp + PT_R4]; + r5 = [sp + PT_R5]; + p5 = [p5]; + + [--sp] = r5; + [--sp] = r4; + [--sp] = r3; + SP += -12; + call (p5); + SP += 24; + [sp + PT_R0] = r0; + + call _syscall_trace; + jump .Lresume_userspace; + +ENTRY(_resume) + /* + * Beware - when entering resume, prev (the current task) is + * in r0, next (the new task) is in r1. + */ + p0 = r0; + p1 = r1; + [--sp] = rets; + [--sp] = fp; + [--sp] = (r7:4, p5:3); + + /* save usp */ + p2 = usp; + [p0+(TASK_THREAD+THREAD_USP)] = p2; + + /* save current kernel stack pointer */ + [p0+(TASK_THREAD+THREAD_KSP)] = sp; + + /* save program counter */ + r1.l = _new_old_task; + r1.h = _new_old_task; + [p0+(TASK_THREAD+THREAD_PC)] = r1; + + /* restore the kernel stack pointer */ + sp = [p1+(TASK_THREAD+THREAD_KSP)]; + + /* restore user stack pointer */ + p0 = [p1+(TASK_THREAD+THREAD_USP)]; + usp = p0; + + /* restore pc */ + p0 = [p1+(TASK_THREAD+THREAD_PC)]; + jump (p0); + + /* + * Following code actually lands up in a new (old) task. + */ + +_new_old_task: + (r7:4, p5:3) = [sp++]; + fp = [sp++]; + rets = [sp++]; + + /* + * When we come out of resume, r0 carries "old" task, becuase we are + * in "new" task. + */ + rts; + +ENTRY(_ret_from_exception) + p2.l = lo(IPEND); + p2.h = hi(IPEND); + + csync; + r0 = [p2]; + [sp + PT_IPEND] = r0; + +1: + r1 = 0x37(Z); + r2 = ~r1; + r2.h = 0; + r0 = r2 & r0; + cc = r0 == 0; + if !cc jump 4f; /* if not return to user mode, get out */ + + /* Make sure any pending system call or deferred exception + * return in ILAT for this process to get executed, otherwise + * in case context switch happens, system call of + * first process (i.e in ILAT) will be carried + * forward to the switched process + */ + + p2.l = lo(ILAT); + p2.h = hi(ILAT); + r0 = [p2]; + r1 = (EVT_IVG14 | EVT_IVG15) (z); + r0 = r0 & r1; + cc = r0 == 0; + if !cc jump 5f; + + /* Set the stack for the current process */ + r7 = sp; + r4.l = lo(ALIGN_PAGE_MASK); + r4.h = hi(ALIGN_PAGE_MASK); + r7 = r7 & r4; /* thread_info->flags */ + p5 = r7; + r7 = [p5 + TI_FLAGS]; + r4.l = lo(_TIF_WORK_MASK); + r4.h = hi(_TIF_WORK_MASK); + r7 = r7 & r4; + cc = r7 == 0; + if cc jump 4f; + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _schedule_and_signal; + p1.h = _schedule_and_signal; + [p0] = p1; + csync; + raise 15; /* raise evt14 to do signal or reschedule */ +4: + r0 = syscfg; + bitclr(r0, 0); + syscfg = r0; +5: + rts; + +ENTRY(_return_from_int) + /* If someone else already raised IRQ 15, do nothing. */ + csync; + p2.l = lo(ILAT); + p2.h = hi(ILAT); + r0 = [p2]; + cc = bittst (r0, EVT_IVG15_P); + if cc jump 2f; + + /* if not return to user mode, get out */ + p2.l = lo(IPEND); + p2.h = hi(IPEND); + r0 = [p2]; + r1 = 0x17(Z); + r2 = ~r1; + r2.h = 0; + r0 = r2 & r0; + r1 = 1; + r1 = r0 - r1; + r2 = r0 & r1; + cc = r2 == 0; + if !cc jump 2f; + + /* Lower the interrupt level to 15. */ + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _schedule_and_signal_from_int; + p1.h = _schedule_and_signal_from_int; + [p0] = p1; + csync; +#if defined(ANOMALY_05000281) + r0.l = lo(CONFIG_BOOT_LOAD); + r0.h = hi(CONFIG_BOOT_LOAD); + reti = r0; +#endif + r0 = 0x801f (z); + STI r0; + raise 15; /* raise evt15 to do signal or reschedule */ + rti; +2: + rts; + +ENTRY(_lower_to_irq14) +#if defined(ANOMALY_05000281) + r0.l = lo(CONFIG_BOOT_LOAD); + r0.h = hi(CONFIG_BOOT_LOAD); + reti = r0; +#endif + r0 = 0x401f; + sti r0; + raise 14; + rti; +ENTRY(_evt14_softirq) +#ifdef CONFIG_DEBUG_HWERR + r0 = 0x3f; + sti r0; +#else + cli r0; +#endif + [--sp] = RETI; + SP += 4; + rts; + +_schedule_and_signal_from_int: + /* To end up here, vector 15 was changed - so we have to change it + * back. + */ + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _evt_system_call; + p1.h = _evt_system_call; + [p0] = p1; + csync; + p1 = rets; + [sp + PT_RESERVED] = p1; + + p0.l = _irq_flags; + p0.h = _irq_flags; + r0 = [p0]; + sti r0; + + jump.s .Lresume_userspace; + +_schedule_and_signal: + SAVE_CONTEXT_SYSCALL + /* To end up here, vector 15 was changed - so we have to change it + * back. + */ + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _evt_system_call; + p1.h = _evt_system_call; + [p0] = p1; + csync; + p0.l = 1f; + p0.h = 1f; + [sp + PT_RESERVED] = P0; + call .Lresume_userspace; +1: + RESTORE_CONTEXT + rti; + +/* Make sure when we start, that the circular buffer is initialized properly + * R0 and P0 are call clobbered, so we can use them here. + */ +ENTRY(_init_exception_buff) + r0 = 0; + p0.h = _in_ptr_excause; + p0.l = _in_ptr_excause; + [p0] = r0; + p0.h = _out_ptr_excause; + p0.l = _out_ptr_excause; + [p0] = r0; + rts; + +/* + * Put these in the kernel data section - that should always be covered by + * a CPLB. This is needed to ensure we don't get double fault conditions + */ + +#ifdef CONFIG_SYSCALL_TAB_L1 +.section .l1.data +#else +.data +#endif +ALIGN +_extable: + /* entry for each EXCAUSE[5:0] + * This table bmust be in sync with the table in ./kernel/traps.c + * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined + */ + .long _ex_syscall; /* 0x00 - User Defined - Linux Syscall */ + .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ + .long _ex_trap_c /* 0x02 - User Defined */ + .long _ex_trap_c /* 0x03 - User Defined - Atomic test and set service */ + .long _ex_spinlock /* 0x04 - User Defined */ + .long _ex_trap_c /* 0x05 - User Defined */ + .long _ex_trap_c /* 0x06 - User Defined */ + .long _ex_trap_c /* 0x07 - User Defined */ + .long _ex_trap_c /* 0x08 - User Defined */ + .long _ex_trap_c /* 0x09 - User Defined */ + .long _ex_trap_c /* 0x0A - User Defined */ + .long _ex_trap_c /* 0x0B - User Defined */ + .long _ex_trap_c /* 0x0C - User Defined */ + .long _ex_trap_c /* 0x0D - User Defined */ + .long _ex_trap_c /* 0x0E - User Defined */ + .long _ex_trap_c /* 0x0F - User Defined */ + .long _ex_single_step /* 0x10 - HW Single step */ + .long _ex_trap_c /* 0x11 - Trace Buffer Full */ + .long _ex_trap_c /* 0x12 - Reserved */ + .long _ex_trap_c /* 0x13 - Reserved */ + .long _ex_trap_c /* 0x14 - Reserved */ + .long _ex_trap_c /* 0x15 - Reserved */ + .long _ex_trap_c /* 0x16 - Reserved */ + .long _ex_trap_c /* 0x17 - Reserved */ + .long _ex_trap_c /* 0x18 - Reserved */ + .long _ex_trap_c /* 0x19 - Reserved */ + .long _ex_trap_c /* 0x1A - Reserved */ + .long _ex_trap_c /* 0x1B - Reserved */ + .long _ex_trap_c /* 0x1C - Reserved */ + .long _ex_trap_c /* 0x1D - Reserved */ + .long _ex_trap_c /* 0x1E - Reserved */ + .long _ex_trap_c /* 0x1F - Reserved */ + .long _ex_trap_c /* 0x20 - Reserved */ + .long _ex_trap_c /* 0x21 - Undefined Instruction */ + .long _ex_trap_c /* 0x22 - Illegal Instruction Combination */ + .long _ex_dcplb /* 0x23 - Data CPLB Protection Violation */ + .long _ex_trap_c /* 0x24 - Data access misaligned */ + .long _ex_trap_c /* 0x25 - Unrecoverable Event */ + .long _ex_dcplb /* 0x26 - Data CPLB Miss */ + .long _ex_trap_c /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */ + .long _ex_trap_c /* 0x28 - Emulation Watchpoint */ + .long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */ + .long _ex_trap_c /* 0x2A - Instruction fetch misaligned */ + .long _ex_icplb /* 0x2B - Instruction CPLB protection Violation */ + .long _ex_icplb /* 0x2C - Instruction CPLB miss */ + .long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */ + .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */ + .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */ + .long _ex_trap_c /* 0x2F - Reserved */ + .long _ex_trap_c /* 0x30 - Reserved */ + .long _ex_trap_c /* 0x31 - Reserved */ + .long _ex_trap_c /* 0x32 - Reserved */ + .long _ex_trap_c /* 0x33 - Reserved */ + .long _ex_trap_c /* 0x34 - Reserved */ + .long _ex_trap_c /* 0x35 - Reserved */ + .long _ex_trap_c /* 0x36 - Reserved */ + .long _ex_trap_c /* 0x37 - Reserved */ + .long _ex_trap_c /* 0x38 - Reserved */ + .long _ex_trap_c /* 0x39 - Reserved */ + .long _ex_trap_c /* 0x3A - Reserved */ + .long _ex_trap_c /* 0x3B - Reserved */ + .long _ex_trap_c /* 0x3C - Reserved */ + .long _ex_trap_c /* 0x3D - Reserved */ + .long _ex_trap_c /* 0x3E - Reserved */ + .long _ex_trap_c /* 0x3F - Reserved */ + +ALIGN +ENTRY(_sys_call_table) + .long _sys_ni_syscall /* 0 - old "setup()" system call*/ + .long _sys_exit + .long _sys_fork + .long _sys_read + .long _sys_write + .long _sys_open /* 5 */ + .long _sys_close + .long _sys_ni_syscall /* old waitpid */ + .long _sys_creat + .long _sys_link + .long _sys_unlink /* 10 */ + .long _sys_execve + .long _sys_chdir + .long _sys_time + .long _sys_mknod + .long _sys_chmod /* 15 */ + .long _sys_chown /* chown16 */ + .long _sys_ni_syscall /* old break syscall holder */ + .long _sys_ni_syscall /* old stat */ + .long _sys_lseek + .long _sys_getpid /* 20 */ + .long _sys_mount + .long _sys_ni_syscall /* old umount */ + .long _sys_setuid + .long _sys_getuid + .long _sys_stime /* 25 */ + .long _sys_ptrace + .long _sys_alarm + .long _sys_ni_syscall /* old fstat */ + .long _sys_pause + .long _sys_ni_syscall /* old utime */ /* 30 */ + .long _sys_ni_syscall /* old stty syscall holder */ + .long _sys_ni_syscall /* old gtty syscall holder */ + .long _sys_access + .long _sys_nice + .long _sys_ni_syscall /* 35 */ /* old ftime syscall holder */ + .long _sys_sync + .long _sys_kill + .long _sys_rename + .long _sys_mkdir + .long _sys_rmdir /* 40 */ + .long _sys_dup + .long _sys_pipe + .long _sys_times + .long _sys_ni_syscall /* old prof syscall holder */ + .long _sys_brk /* 45 */ + .long _sys_setgid + .long _sys_getgid + .long _sys_ni_syscall /* old sys_signal */ + .long _sys_geteuid /* geteuid16 */ + .long _sys_getegid /* getegid16 */ /* 50 */ + .long _sys_acct + .long _sys_umount /* recycled never used phys() */ + .long _sys_ni_syscall /* old lock syscall holder */ + .long _sys_ioctl + .long _sys_fcntl /* 55 */ + .long _sys_ni_syscall /* old mpx syscall holder */ + .long _sys_setpgid + .long _sys_ni_syscall /* old ulimit syscall holder */ + .long _sys_ni_syscall /* old old uname */ + .long _sys_umask /* 60 */ + .long _sys_chroot + .long _sys_ustat + .long _sys_dup2 + .long _sys_getppid + .long _sys_getpgrp /* 65 */ + .long _sys_setsid + .long _sys_ni_syscall /* old sys_sigaction */ + .long _sys_sgetmask + .long _sys_ssetmask + .long _sys_setreuid /* setreuid16 */ /* 70 */ + .long _sys_setregid /* setregid16 */ + .long _sys_ni_syscall /* old sys_sigsuspend */ + .long _sys_ni_syscall /* old sys_sigpending */ + .long _sys_sethostname + .long _sys_setrlimit /* 75 */ + .long _sys_ni_syscall /* old getrlimit */ + .long _sys_getrusage + .long _sys_gettimeofday + .long _sys_settimeofday + .long _sys_getgroups /* getgroups16 */ /* 80 */ + .long _sys_setgroups /* setgroups16 */ + .long _sys_ni_syscall /* old_select */ + .long _sys_symlink + .long _sys_ni_syscall /* old lstat */ + .long _sys_readlink /* 85 */ + .long _sys_uselib + .long _sys_ni_syscall /* sys_swapon */ + .long _sys_reboot + .long _sys_ni_syscall /* old_readdir */ + .long _sys_ni_syscall /* sys_mmap */ /* 90 */ + .long _sys_munmap + .long _sys_truncate + .long _sys_ftruncate + .long _sys_fchmod + .long _sys_fchown /* fchown16 */ /* 95 */ + .long _sys_getpriority + .long _sys_setpriority + .long _sys_ni_syscall /* old profil syscall holder */ + .long _sys_statfs + .long _sys_fstatfs /* 100 */ + .long _sys_ni_syscall + .long _sys_ni_syscall /* old sys_socketcall */ + .long _sys_syslog + .long _sys_setitimer + .long _sys_getitimer /* 105 */ + .long _sys_newstat + .long _sys_newlstat + .long _sys_newfstat + .long _sys_ni_syscall /* old uname */ + .long _sys_ni_syscall /* iopl for i386 */ /* 110 */ + .long _sys_vhangup + .long _sys_ni_syscall /* obsolete idle() syscall */ + .long _sys_ni_syscall /* vm86old for i386 */ + .long _sys_wait4 + .long _sys_ni_syscall /* 115 */ /* sys_swapoff */ + .long _sys_sysinfo + .long _sys_ni_syscall /* old sys_ipc */ + .long _sys_fsync + .long _sys_ni_syscall /* old sys_sigreturn */ + .long _sys_clone /* 120 */ + .long _sys_setdomainname + .long _sys_newuname + .long _sys_ni_syscall /* old sys_modify_ldt */ + .long _sys_adjtimex + .long _sys_ni_syscall /* 125 */ /* sys_mprotect */ + .long _sys_ni_syscall /* old sys_sigprocmask */ + .long _sys_ni_syscall /* old "creat_module" */ + .long _sys_init_module + .long _sys_delete_module + .long _sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long _sys_quotactl + .long _sys_getpgid + .long _sys_fchdir + .long _sys_bdflush + .long _sys_ni_syscall /* 135 */ /* sys_sysfs */ + .long _sys_personality + .long _sys_ni_syscall /* for afs_syscall */ + .long _sys_setfsuid /* setfsuid16 */ + .long _sys_setfsgid /* setfsgid16 */ + .long _sys_llseek /* 140 */ + .long _sys_getdents + .long _sys_ni_syscall /* sys_select */ + .long _sys_flock + .long _sys_ni_syscall /* sys_msync */ + .long _sys_readv /* 145 */ + .long _sys_writev + .long _sys_getsid + .long _sys_fdatasync + .long _sys_sysctl + .long _sys_ni_syscall /* 150 */ /* sys_mlock */ + .long _sys_ni_syscall /* sys_munlock */ + .long _sys_ni_syscall /* sys_mlockall */ + .long _sys_ni_syscall /* sys_munlockall */ + .long _sys_sched_setparam + .long _sys_sched_getparam /* 155 */ + .long _sys_sched_setscheduler + .long _sys_sched_getscheduler + .long _sys_sched_yield + .long _sys_sched_get_priority_max + .long _sys_sched_get_priority_min /* 160 */ + .long _sys_sched_rr_get_interval + .long _sys_nanosleep + .long _sys_ni_syscall /* sys_mremap */ + .long _sys_setresuid /* setresuid16 */ + .long _sys_getresuid /* getresuid16 */ /* 165 */ + .long _sys_ni_syscall /* for vm86 */ + .long _sys_ni_syscall /* old "query_module" */ + .long _sys_ni_syscall /* sys_poll */ + .long _sys_ni_syscall /* sys_nfsservctl */ + .long _sys_setresgid /* setresgid16 */ /* 170 */ + .long _sys_getresgid /* getresgid16 */ + .long _sys_prctl + .long _sys_rt_sigreturn + .long _sys_rt_sigaction + .long _sys_rt_sigprocmask /* 175 */ + .long _sys_rt_sigpending + .long _sys_rt_sigtimedwait + .long _sys_rt_sigqueueinfo + .long _sys_rt_sigsuspend + .long _sys_pread64 /* 180 */ + .long _sys_pwrite64 + .long _sys_lchown /* lchown16 */ + .long _sys_getcwd + .long _sys_capget + .long _sys_capset /* 185 */ + .long _sys_sigaltstack + .long _sys_sendfile + .long _sys_ni_syscall /* streams1 */ + .long _sys_ni_syscall /* streams2 */ + .long _sys_vfork /* 190 */ + .long _sys_getrlimit + .long _sys_mmap2 + .long _sys_truncate64 + .long _sys_ftruncate64 + .long _sys_stat64 /* 195 */ + .long _sys_lstat64 + .long _sys_fstat64 + .long _sys_chown + .long _sys_getuid + .long _sys_getgid /* 200 */ + .long _sys_geteuid + .long _sys_getegid + .long _sys_setreuid + .long _sys_setregid + .long _sys_getgroups /* 205 */ + .long _sys_setgroups + .long _sys_fchown + .long _sys_setresuid + .long _sys_getresuid + .long _sys_setresgid /* 210 */ + .long _sys_getresgid + .long _sys_lchown + .long _sys_setuid + .long _sys_setgid + .long _sys_setfsuid /* 215 */ + .long _sys_setfsgid + .long _sys_pivot_root + .long _sys_ni_syscall /* sys_mincore */ + .long _sys_ni_syscall /* sys_madvise */ + .long _sys_getdents64 /* 220 */ + .long _sys_fcntl64 + .long _sys_ni_syscall /* reserved for TUX */ + .long _sys_ni_syscall + .long _sys_gettid + .long _sys_ni_syscall /* 225 */ /* sys_readahead */ + .long _sys_setxattr + .long _sys_lsetxattr + .long _sys_fsetxattr + .long _sys_getxattr + .long _sys_lgetxattr /* 230 */ + .long _sys_fgetxattr + .long _sys_listxattr + .long _sys_llistxattr + .long _sys_flistxattr + .long _sys_removexattr /* 235 */ + .long _sys_lremovexattr + .long _sys_fremovexattr + .long _sys_tkill + .long _sys_sendfile64 + .long _sys_futex /* 240 */ + .long _sys_sched_setaffinity + .long _sys_sched_getaffinity + .long _sys_ni_syscall /* sys_set_thread_area */ + .long _sys_ni_syscall /* sys_get_thread_area */ + .long _sys_io_setup /* 245 */ + .long _sys_io_destroy + .long _sys_io_getevents + .long _sys_io_submit + .long _sys_io_cancel + .long _sys_ni_syscall /* 250 */ /* sys_alloc_hugepages */ + .long _sys_ni_syscall /* sys_freec_hugepages */ + .long _sys_exit_group + .long _sys_lookup_dcookie + .long _sys_bfin_spinlock + .long _sys_epoll_create /* 255 */ + .long _sys_epoll_ctl + .long _sys_epoll_wait + .long _sys_ni_syscall /* remap_file_pages */ + .long _sys_set_tid_address + .long _sys_timer_create /* 260 */ + .long _sys_timer_settime + .long _sys_timer_gettime + .long _sys_timer_getoverrun + .long _sys_timer_delete + .long _sys_clock_settime /* 265 */ + .long _sys_clock_gettime + .long _sys_clock_getres + .long _sys_clock_nanosleep + .long _sys_statfs64 + .long _sys_fstatfs64 /* 270 */ + .long _sys_tgkill + .long _sys_utimes + .long _sys_fadvise64_64 + .long _sys_ni_syscall /* vserver */ + .long _sys_ni_syscall /* 275, mbind */ + .long _sys_ni_syscall /* get_mempolicy */ + .long _sys_ni_syscall /* set_mempolicy */ + .long _sys_mq_open + .long _sys_mq_unlink + .long _sys_mq_timedsend /* 280 */ + .long _sys_mq_timedreceive + .long _sys_mq_notify + .long _sys_mq_getsetattr + .long _sys_ni_syscall /* kexec_load */ + .long _sys_waitid /* 285 */ + .long _sys_add_key + .long _sys_request_key + .long _sys_keyctl + .long _sys_ioprio_set + .long _sys_ioprio_get /* 290 */ + .long _sys_inotify_init + .long _sys_inotify_add_watch + .long _sys_inotify_rm_watch + .long _sys_ni_syscall /* migrate_pages */ + .long _sys_openat /* 295 */ + .long _sys_mkdirat + .long _sys_mknodat + .long _sys_fchownat + .long _sys_futimesat + .long _sys_fstatat64 /* 300 */ + .long _sys_unlinkat + .long _sys_renameat + .long _sys_linkat + .long _sys_symlinkat + .long _sys_readlinkat /* 305 */ + .long _sys_fchmodat + .long _sys_faccessat + .long _sys_pselect6 + .long _sys_ppoll + .long _sys_unshare /* 310 */ + .long _sys_sram_alloc + .long _sys_sram_free + .long _sys_dma_memcpy + .long _sys_accept + .long _sys_bind /* 315 */ + .long _sys_connect + .long _sys_getpeername + .long _sys_getsockname + .long _sys_getsockopt + .long _sys_listen /* 320 */ + .long _sys_recv + .long _sys_recvfrom + .long _sys_recvmsg + .long _sys_send + .long _sys_sendmsg /* 325 */ + .long _sys_sendto + .long _sys_setsockopt + .long _sys_shutdown + .long _sys_socket + .long _sys_socketpair /* 330 */ + .long _sys_semctl + .long _sys_semget + .long _sys_semop + .long _sys_msgctl + .long _sys_msgget /* 335 */ + .long _sys_msgrcv + .long _sys_msgsnd + .long _sys_shmat + .long _sys_shmctl + .long _sys_shmdt /* 340 */ + .long _sys_shmget + .rept NR_syscalls-(.-_sys_call_table)/4 + .long _sys_ni_syscall + .endr +_excpt_saved_imask: + .long 0; + +_exception_stack: + .rept 1024 + .long 0; + .endr +_exception_stack_top: + +#if defined(ANOMALY_05000261) +/* Used by the assembly entry point to work around an anomaly. */ +_last_cplb_fault_retx: + .long 0; +#endif +/* + * Single instructions can have multiple faults, which need to be + * handled by traps.c, in irq5. We store the exception cause to ensure + * we don't miss a double fault condition + */ +ENTRY(_in_ptr_excause) + .long 0; +ENTRY(_out_ptr_excause) + .long 0; +ALIGN +ENTRY(_excause_circ_buf) + .rept 4 + .long 0 + .endr diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S new file mode 100644 index 0000000000..dd45664f0d --- /dev/null +++ b/arch/blackfin/mach-common/interrupt.S @@ -0,0 +1,253 @@ +/* + * File: arch/blackfin/mach-common/interrupt.S + * Based on: + * Author: D. Jeff Dionne + * Kenneth Albanowski + * + * Created: ? + * Description: Interrupt Entries + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include + +#include + +#ifdef CONFIG_I_ENTRY_L1 +.section .l1.text +#else +.text +#endif + +.align 4 /* just in case */ + +/* + * initial interrupt handlers + */ + +#ifndef CONFIG_KGDB + /* interrupt routine for emulation - 0 */ + /* Currently used only if GDB stub is not in - invalid */ + /* gdb-stub set the evt itself */ + /* save registers for post-mortem only */ +ENTRY(_evt_emulation) + SAVE_ALL_SYS +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif + r0 = IRQ_EMU; + r1 = sp; + SP += -12; + call _irq_panic; + SP += 12; + /* - GDB stub fills this in by itself (if defined) */ + rte; +#endif + +/* Common interrupt entry code. First we do CLI, then push + * RETI, to keep interrupts disabled, but to allow this state to be changed + * by local_bh_enable. + * R0 contains the interrupt number, while R1 may contain the value of IPEND, + * or garbage if IPEND won't be needed by the ISR. */ +__common_int_entry: + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + r2 = RETI; + [--sp] = r2; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = r1; /* IPEND - R1 may or may not be set up before jumping here. */ + + /* Switch to other method of keeping interrupts disabled. */ +#ifdef CONFIG_DEBUG_HWERR + r1 = 0x3f; + sti r1; +#else + cli r1; +#endif + [--sp] = RETI; /* orig_pc */ + /* Clear all L registers. */ + r1 = 0 (x); + l0 = r1; + l1 = r1; + l2 = r1; + l3 = r1; +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif + +#ifdef ANOMALY_05000283 + cc = r7 == r7; + p5.h = 0xffc0; + p5.l = 0x0014; + if cc jump 1f; + r7.l = W[p5]; +1: +#endif + r1 = sp; + SP += -12; + call _do_irq; + SP += 12; + call _return_from_int; +.Lcommon_restore_context: + RESTORE_CONTEXT + rti; + +/* interrupt routine for ivhw - 5 */ +ENTRY(_evt_ivhw) + SAVE_CONTEXT +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif +#ifdef ANOMALY_05000283 + cc = r7 == r7; + p5.h = 0xffc0; + p5.l = 0x0014; + if cc jump 1f; + r7.l = W[p5]; +1: +#endif + p0.l = lo(TBUFCTL); + p0.h = hi(TBUFCTL); + r0 = 1; + [p0] = r0; + r0 = IRQ_HWERR; + r1 = sp; + +#ifdef CONFIG_HARDWARE_PM + r7 = SEQSTAT; + r7 = r7 >>> 0xe; + r6 = 0x1F; + r7 = r7 & r6; + r5 = 0x12; + cc = r7 == r5; + if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */ +#endif + + SP += -12; + call _irq_panic; + SP += 12; + rti; +#ifdef CONFIG_HARDWARE_PM +.Lcall_do_ovf: + + SP += -12; + call _pm_overflow; + SP += 12; + + jump .Lcommon_restore_context; +#endif + +/* interrupt routine for evt2 - 2. This is NMI. */ +ENTRY(_evt_evt2) + SAVE_CONTEXT +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif +#ifdef ANOMALY_05000283 + cc = r7 == r7; + p5.h = 0xffc0; + p5.l = 0x0014; + if cc jump 1f; + r7.l = W[p5]; +1: +#endif + r0 = IRQ_NMI; + r1 = sp; + SP += -12; + call _asm_do_IRQ; + SP += 12; + RESTORE_CONTEXT + rtn; + +/* interrupt routine for core timer - 6 */ +ENTRY(_evt_timer) + TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P) + +/* interrupt routine for evt7 - 7 */ +ENTRY(_evt_evt7) + INTERRUPT_ENTRY(EVT_IVG7_P) +ENTRY(_evt_evt8) + INTERRUPT_ENTRY(EVT_IVG8_P) +ENTRY(_evt_evt9) + INTERRUPT_ENTRY(EVT_IVG9_P) +ENTRY(_evt_evt10) + INTERRUPT_ENTRY(EVT_IVG10_P) +ENTRY(_evt_evt11) + INTERRUPT_ENTRY(EVT_IVG11_P) +ENTRY(_evt_evt12) + INTERRUPT_ENTRY(EVT_IVG12_P) +ENTRY(_evt_evt13) + INTERRUPT_ENTRY(EVT_IVG13_P) + + + /* interrupt routine for system_call - 15 */ +ENTRY(_evt_system_call) + SAVE_CONTEXT_SYSCALL +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif + call _system_call; + jump .Lcommon_restore_context; diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c new file mode 100644 index 0000000000..f3cf07036c --- /dev/null +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -0,0 +1,476 @@ +/* + * File: arch/blackfin/mach-common/ints-priority-dc.c + * Based on: + * Author: + * + * Created: ? + * Description: Set up the interupt priorities + * + * Modified: + * 1996 Roman Zippel + * 1999 D. Jeff Dionne + * 2000-2001 Lineo, Inc. D. Jefff Dionne + * 2002 Arcturus Networks Inc. MaTed + * 2003 Metrowerks/Motorola + * 2003 Bas Vermeulen + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#ifdef CONFIG_KGDB +#include +#endif +#include +#include +#include +#include + +/* + * NOTES: + * - we have separated the physical Hardware interrupt from the + * levels that the LINUX kernel sees (see the description in irq.h) + * - + */ + +unsigned long irq_flags = 0; + +/* The number of spurious interrupts */ +atomic_t num_spurious; + +struct ivgx { + /* irq number for request_irq, available in mach-bf561/irq.h */ + int irqno; + /* corresponding bit in the SICA_ISR0 register */ + int isrflag0; + /* corresponding bit in the SICA_ISR1 register */ + int isrflag1; +} ivg_table[NR_PERI_INTS]; + +struct ivg_slice { + /* position of first irq in ivg_table for given ivg */ + struct ivgx *ifirst; + struct ivgx *istop; +} ivg7_13[IVG13 - IVG7 + 1]; + +static void search_IAR(void); + +/* + * Search SIC_IAR and fill tables with the irqvalues + * and their positions in the SIC_ISR register. + */ +static void __init search_IAR(void) +{ + unsigned ivg, irq_pos = 0; + for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) { + int irqn; + + ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos]; + + for (irqn = 0; irqn < NR_PERI_INTS; irqn++) { + int iar_shift = (irqn & 7) * 4; + if (ivg == + (0xf & + bfin_read32((unsigned long *)SICA_IAR0 + + (irqn >> 3)) >> iar_shift)) { + ivg_table[irq_pos].irqno = IVG7 + irqn; + ivg_table[irq_pos].isrflag0 = + (irqn < 32 ? (1 << irqn) : 0); + ivg_table[irq_pos].isrflag1 = + (irqn < 32 ? 0 : (1 << (irqn - 32))); + ivg7_13[ivg].istop++; + irq_pos++; + } + } + } +} + +/* + * This is for BF561 internal IRQs + */ + +static void ack_noop(unsigned int irq) +{ + /* Dummy function. */ +} + +static void bf561_core_mask_irq(unsigned int irq) +{ + irq_flags &= ~(1 << irq); + if (!irqs_disabled()) + local_irq_enable(); +} + +static void bf561_core_unmask_irq(unsigned int irq) +{ + irq_flags |= 1 << irq; + /* + * If interrupts are enabled, IMASK must contain the same value + * as irq_flags. Make sure that invariant holds. If interrupts + * are currently disabled we need not do anything; one of the + * callers will take care of setting IMASK to the proper value + * when reenabling interrupts. + * local_irq_enable just does "STI irq_flags", so it's exactly + * what we need. + */ + if (!irqs_disabled()) + local_irq_enable(); + return; +} + +static void bf561_internal_mask_irq(unsigned int irq) +{ + unsigned long irq_mask; + if ((irq - (IRQ_CORETMR + 1)) < 32) { + irq_mask = (1 << (irq - (IRQ_CORETMR + 1))); + bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() & ~irq_mask); + } else { + irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32)); + bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() & ~irq_mask); + } +} + +static void bf561_internal_unmask_irq(unsigned int irq) +{ + unsigned long irq_mask; + + if ((irq - (IRQ_CORETMR + 1)) < 32) { + irq_mask = (1 << (irq - (IRQ_CORETMR + 1))); + bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() | irq_mask); + } else { + irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32)); + bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() | irq_mask); + } + SSYNC(); +} + +static struct irq_chip bf561_core_irqchip = { + .ack = ack_noop, + .mask = bf561_core_mask_irq, + .unmask = bf561_core_unmask_irq, +}; + +static struct irq_chip bf561_internal_irqchip = { + .ack = ack_noop, + .mask = bf561_internal_mask_irq, + .unmask = bf561_internal_unmask_irq, +}; + +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO +static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; +static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; + +static void bf561_gpio_ack_irq(unsigned int irq) +{ + u16 gpionr = irq - IRQ_PF0; + + if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { + set_gpio_data(gpionr, 0); + SSYNC(); + } +} + +static void bf561_gpio_mask_ack_irq(unsigned int irq) +{ + u16 gpionr = irq - IRQ_PF0; + + if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { + set_gpio_data(gpionr, 0); + SSYNC(); + } + + set_gpio_maska(gpionr, 0); + SSYNC(); +} + +static void bf561_gpio_mask_irq(unsigned int irq) +{ + set_gpio_maska(irq - IRQ_PF0, 0); + SSYNC(); +} + +static void bf561_gpio_unmask_irq(unsigned int irq) +{ + set_gpio_maska(irq - IRQ_PF0, 1); + SSYNC(); +} + +static unsigned int bf561_gpio_irq_startup(unsigned int irq) +{ + unsigned int ret; + u16 gpionr = irq - IRQ_PF0; + + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { + + ret = gpio_request(gpionr, NULL); + if(ret) + return ret; + + } + + gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); + bf561_gpio_unmask_irq(irq); + + return ret; + +} + +static void bf561_gpio_irq_shutdown(unsigned int irq) +{ + bf561_gpio_mask_irq(irq); + gpio_free(irq - IRQ_PF0); + gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0); +} + +static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) +{ + + unsigned int ret; + u16 gpionr = irq - IRQ_PF0; + + + if (type == IRQ_TYPE_PROBE) { + /* only probe unenabled GPIO interrupt lines */ + if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr)) + return 0; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + + } + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { + + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { + + ret = gpio_request(gpionr, NULL); + if(ret) + return ret; + + } + + gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); + } else { + gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); + return 0; + } + + + set_gpio_dir(gpionr, 0); + set_gpio_inen(gpionr, 1); + + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { + gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr); + set_gpio_edge(gpionr, 1); + } else { + set_gpio_edge(gpionr, 0); + gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); + } + + if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + set_gpio_both(gpionr, 1); + else + set_gpio_both(gpionr, 0); + + if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) + set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */ + else + set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */ + + SSYNC(); + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + set_irq_handler(irq, handle_edge_irq); + else + set_irq_handler(irq, handle_level_irq); + + return 0; +} + +static struct irq_chip bf561_gpio_irqchip = { + .ack = bf561_gpio_ack_irq, + .mask = bf561_gpio_mask_irq, + .mask_ack = bf561_gpio_mask_ack_irq, + .unmask = bf561_gpio_unmask_irq, + .set_type = bf561_gpio_irq_type, + .startup = bf561_gpio_irq_startup, + .shutdown = bf561_gpio_irq_shutdown +}; + +static void bf561_demux_gpio_irq(unsigned int inta_irq, + struct irq_desc *intb_desc) +{ + int irq, flag_d, mask; + u16 gpio; + + switch (inta_irq) { + case IRQ_PROG0_INTA: + irq = IRQ_PF0; + break; + case IRQ_PROG1_INTA: + irq = IRQ_PF16; + break; + case IRQ_PROG2_INTA: + irq = IRQ_PF32; + break; + default: + dump_stack(); + return; + } + + gpio = irq - IRQ_PF0; + + flag_d = get_gpiop_data(gpio); + mask = flag_d & (gpio_enabled[gpio_bank(gpio)] & + get_gpiop_maska(gpio)); + + do { + if (mask & 1) { + struct irq_desc *desc = irq_desc + irq; + desc->handle_irq(irq, desc); + } + irq++; + mask >>= 1; + } while (mask); + + +} + +#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */ + +/* + * This function should be called during kernel startup to initialize + * the BFin IRQ handling routines. + */ +int __init init_arch_irq(void) +{ + int irq; + unsigned long ilat = 0; + /* Disable all the peripheral intrs - page 4-29 HW Ref manual */ + bfin_write_SICA_IMASK0(SIC_UNMASK_ALL); + bfin_write_SICA_IMASK1(SIC_UNMASK_ALL); + SSYNC(); + + local_irq_disable(); + + init_exception_buff(); + +#ifndef CONFIG_KGDB + bfin_write_EVT0(evt_emulation); +#endif + bfin_write_EVT2(evt_evt2); + bfin_write_EVT3(trap); + bfin_write_EVT5(evt_ivhw); + bfin_write_EVT6(evt_timer); + bfin_write_EVT7(evt_evt7); + bfin_write_EVT8(evt_evt8); + bfin_write_EVT9(evt_evt9); + bfin_write_EVT10(evt_evt10); + bfin_write_EVT11(evt_evt11); + bfin_write_EVT12(evt_evt12); + bfin_write_EVT13(evt_evt13); + bfin_write_EVT14(evt14_softirq); + bfin_write_EVT15(evt_system_call); + CSYNC(); + + for (irq = 0; irq < SYS_IRQS; irq++) { + if (irq <= IRQ_CORETMR) + set_irq_chip(irq, &bf561_core_irqchip); + else + set_irq_chip(irq, &bf561_internal_irqchip); +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO + if ((irq != IRQ_PROG0_INTA) && + (irq != IRQ_PROG1_INTA) && (irq != IRQ_PROG2_INTA)) { +#endif + set_irq_handler(irq, handle_simple_irq); +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO + } else { + set_irq_chained_handler(irq, bf561_demux_gpio_irq); + } +#endif + + } + +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO + for (irq = IRQ_PF0; irq <= IRQ_PF47; irq++) { + set_irq_chip(irq, &bf561_gpio_irqchip); + /* if configured as edge, then will be changed to do_edge_IRQ */ + set_irq_handler(irq, handle_level_irq); + } +#endif + bfin_write_IMASK(0); + CSYNC(); + ilat = bfin_read_ILAT(); + CSYNC(); + bfin_write_ILAT(ilat); + CSYNC(); + + printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n"); + /* IMASK=xxx is equivalent to STI xx or irq_flags=xx, + * local_irq_enable() + */ + program_IAR(); + /* Therefore it's better to setup IARs before interrupts enabled */ + search_IAR(); + + /* Enable interrupts IVG7-15 */ + irq_flags = irq_flags | IMASK_IVG15 | + IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | + IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; + + return 0; +} + +#ifdef CONFIG_DO_IRQ_L1 +void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text)); +#endif + +void do_irq(int vec, struct pt_regs *fp) +{ + if (vec == EVT_IVTMR_P) { + vec = IRQ_CORETMR; + } else { + struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; + struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; + unsigned long sic_status0, sic_status1; + + SSYNC(); + sic_status0 = bfin_read_SICA_IMASK0() & bfin_read_SICA_ISR0(); + sic_status1 = bfin_read_SICA_IMASK1() & bfin_read_SICA_ISR1(); + + for (;; ivg++) { + if (ivg >= ivg_stop) { + atomic_inc(&num_spurious); + return; + } else if ((sic_status0 & ivg->isrflag0) || + (sic_status1 & ivg->isrflag1)) + break; + } + vec = ivg->irqno; + } + asm_do_IRQ(vec, fp); + +#ifdef CONFIG_KGDB + kgdb_process_breakpoint(); +#endif +} diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c new file mode 100644 index 0000000000..34b62288ec --- /dev/null +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -0,0 +1,577 @@ +/* + * File: arch/blackfin/mach-common/ints-priority-sc.c + * Based on: + * Author: + * + * Created: ? + * Description: Set up the interupt priorities + * + * Modified: + * 1996 Roman Zippel + * 1999 D. Jeff Dionne + * 2000-2001 Lineo, Inc. D. Jefff Dionne + * 2002 Arcturus Networks Inc. MaTed + * 2003 Metrowerks/Motorola + * 2003 Bas Vermeulen + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#ifdef CONFIG_KGDB +#include +#endif +#include +#include +#include +#include + +#ifdef BF537_FAMILY +# define BF537_GENERIC_ERROR_INT_DEMUX +#else +# undef BF537_GENERIC_ERROR_INT_DEMUX +#endif + +/* + * NOTES: + * - we have separated the physical Hardware interrupt from the + * levels that the LINUX kernel sees (see the description in irq.h) + * - + */ + +unsigned long irq_flags = 0; + +/* The number of spurious interrupts */ +atomic_t num_spurious; + +struct ivgx { + /* irq number for request_irq, available in mach-bf533/irq.h */ + int irqno; + /* corresponding bit in the SIC_ISR register */ + int isrflag; +} ivg_table[NR_PERI_INTS]; + +struct ivg_slice { + /* position of first irq in ivg_table for given ivg */ + struct ivgx *ifirst; + struct ivgx *istop; +} ivg7_13[IVG13 - IVG7 + 1]; + +static void search_IAR(void); + +/* + * Search SIC_IAR and fill tables with the irqvalues + * and their positions in the SIC_ISR register. + */ +static void __init search_IAR(void) +{ + unsigned ivg, irq_pos = 0; + for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) { + int irqn; + + ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = + &ivg_table[irq_pos]; + + for (irqn = 0; irqn < NR_PERI_INTS; irqn++) { + int iar_shift = (irqn & 7) * 4; + if (ivg == + (0xf & + bfin_read32((unsigned long *) SIC_IAR0 + + (irqn >> 3)) >> iar_shift)) { + ivg_table[irq_pos].irqno = IVG7 + irqn; + ivg_table[irq_pos].isrflag = 1 << irqn; + ivg7_13[ivg].istop++; + irq_pos++; + } + } + } +} + +/* + * This is for BF533 internal IRQs + */ + +static void ack_noop(unsigned int irq) +{ + /* Dummy function. */ +} + +static void bfin_core_mask_irq(unsigned int irq) +{ + irq_flags &= ~(1 << irq); + if (!irqs_disabled()) + local_irq_enable(); +} + +static void bfin_core_unmask_irq(unsigned int irq) +{ + irq_flags |= 1 << irq; + /* + * If interrupts are enabled, IMASK must contain the same value + * as irq_flags. Make sure that invariant holds. If interrupts + * are currently disabled we need not do anything; one of the + * callers will take care of setting IMASK to the proper value + * when reenabling interrupts. + * local_irq_enable just does "STI irq_flags", so it's exactly + * what we need. + */ + if (!irqs_disabled()) + local_irq_enable(); + return; +} + +static void bfin_internal_mask_irq(unsigned int irq) +{ + bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & + ~(1 << (irq - (IRQ_CORETMR + 1)))); + SSYNC(); +} + +static void bfin_internal_unmask_irq(unsigned int irq) +{ + bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | + (1 << (irq - (IRQ_CORETMR + 1)))); + SSYNC(); +} + +static struct irq_chip bfin_core_irqchip = { + .ack = ack_noop, + .mask = bfin_core_mask_irq, + .unmask = bfin_core_unmask_irq, +}; + +static struct irq_chip bfin_internal_irqchip = { + .ack = ack_noop, + .mask = bfin_internal_mask_irq, + .unmask = bfin_internal_unmask_irq, +}; + +#ifdef BF537_GENERIC_ERROR_INT_DEMUX +static int error_int_mask; + +static void bfin_generic_error_ack_irq(unsigned int irq) +{ + +} + +static void bfin_generic_error_mask_irq(unsigned int irq) +{ + error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR)); + + if (!error_int_mask) { + local_irq_disable(); + bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & + ~(1 << + (IRQ_GENERIC_ERROR - + (IRQ_CORETMR + 1)))); + SSYNC(); + local_irq_enable(); + } +} + +static void bfin_generic_error_unmask_irq(unsigned int irq) +{ + local_irq_disable(); + bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 << + (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1))); + SSYNC(); + local_irq_enable(); + + error_int_mask |= 1L << (irq - IRQ_PPI_ERROR); +} + +static struct irq_chip bfin_generic_error_irqchip = { + .ack = bfin_generic_error_ack_irq, + .mask = bfin_generic_error_mask_irq, + .unmask = bfin_generic_error_unmask_irq, +}; + +static void bfin_demux_error_irq(unsigned int int_err_irq, + struct irq_desc *intb_desc) +{ + int irq = 0; + + SSYNC(); + +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) + if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK) + irq = IRQ_MAC_ERROR; + else +#endif + if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK) + irq = IRQ_SPORT0_ERROR; + else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK) + irq = IRQ_SPORT1_ERROR; + else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK) + irq = IRQ_PPI_ERROR; + else if (bfin_read_CAN_GIF() & CAN_ERR_MASK) + irq = IRQ_CAN_ERROR; + else if (bfin_read_SPI_STAT() & SPI_ERR_MASK) + irq = IRQ_SPI_ERROR; + else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) && + (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0)) + irq = IRQ_UART0_ERROR; + else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) && + (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0)) + irq = IRQ_UART1_ERROR; + + if (irq) { + if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) { + struct irq_desc *desc = irq_desc + irq; + desc->handle_irq(irq, desc); + } else { + + switch (irq) { + case IRQ_PPI_ERROR: + bfin_write_PPI_STATUS(PPI_ERR_MASK); + break; +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) + case IRQ_MAC_ERROR: + bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK); + break; +#endif + case IRQ_SPORT0_ERROR: + bfin_write_SPORT0_STAT(SPORT_ERR_MASK); + break; + + case IRQ_SPORT1_ERROR: + bfin_write_SPORT1_STAT(SPORT_ERR_MASK); + break; + + case IRQ_CAN_ERROR: + bfin_write_CAN_GIS(CAN_ERR_MASK); + break; + + case IRQ_SPI_ERROR: + bfin_write_SPI_STAT(SPI_ERR_MASK); + break; + + default: + break; + } + + pr_debug("IRQ %d:" + " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n", + irq); + } + } else + printk(KERN_ERR + "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR" + " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n", + __FUNCTION__, __FILE__, __LINE__); + + +} +#endif /* BF537_GENERIC_ERROR_INT_DEMUX */ + +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO + +static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; +static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; + +static void bfin_gpio_ack_irq(unsigned int irq) +{ + u16 gpionr = irq - IRQ_PF0; + + if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { + set_gpio_data(gpionr, 0); + SSYNC(); + } +} + +static void bfin_gpio_mask_ack_irq(unsigned int irq) +{ + u16 gpionr = irq - IRQ_PF0; + + if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) { + set_gpio_data(gpionr, 0); + SSYNC(); + } + + set_gpio_maska(gpionr, 0); + SSYNC(); +} + +static void bfin_gpio_mask_irq(unsigned int irq) +{ + set_gpio_maska(irq - IRQ_PF0, 0); + SSYNC(); +} + +static void bfin_gpio_unmask_irq(unsigned int irq) +{ + set_gpio_maska(irq - IRQ_PF0, 1); + SSYNC(); +} + +static unsigned int bfin_gpio_irq_startup(unsigned int irq) +{ + unsigned int ret; + u16 gpionr = irq - IRQ_PF0; + + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { + ret = gpio_request(gpionr, NULL); + if (ret) + return ret; + } + + gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); + bfin_gpio_unmask_irq(irq); + + return ret; +} + +static void bfin_gpio_irq_shutdown(unsigned int irq) +{ + bfin_gpio_mask_irq(irq); + gpio_free(irq - IRQ_PF0); + gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0); +} + +static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) +{ + + unsigned int ret; + u16 gpionr = irq - IRQ_PF0; + + if (type == IRQ_TYPE_PROBE) { + /* only probe unenabled GPIO interrupt lines */ + if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr)) + return 0; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + } + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + { + if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { + ret = gpio_request(gpionr, NULL); + if (ret) + return ret; + } + + gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr); + } else { + gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); + return 0; + } + + set_gpio_dir(gpionr, 0); + set_gpio_inen(gpionr, 1); + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { + gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr); + set_gpio_edge(gpionr, 1); + } else { + set_gpio_edge(gpionr, 0); + gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); + } + + if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + set_gpio_both(gpionr, 1); + else + set_gpio_both(gpionr, 0); + + if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) + set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */ + else + set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */ + + SSYNC(); + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + set_irq_handler(irq, handle_edge_irq); + else + set_irq_handler(irq, handle_level_irq); + + return 0; +} + + +static struct irq_chip bfin_gpio_irqchip = { + .ack = bfin_gpio_ack_irq, + .mask = bfin_gpio_mask_irq, + .mask_ack = bfin_gpio_mask_ack_irq, + .unmask = bfin_gpio_unmask_irq, + .set_type = bfin_gpio_irq_type, + .startup = bfin_gpio_irq_startup, + .shutdown = bfin_gpio_irq_shutdown +}; + +static void bfin_demux_gpio_irq(unsigned int intb_irq, + struct irq_desc *intb_desc) +{ + u16 i; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=16) { + int irq = IRQ_PF0 + i; + int flag_d = get_gpiop_data(i); + int mask = + flag_d & (gpio_enabled[gpio_bank(i)] & + get_gpiop_maska(i)); + + while (mask) { + if (mask & 1) { + struct irq_desc *desc = irq_desc + irq; + desc->handle_irq(irq, desc); + } + irq++; + mask >>= 1; + } + } +} + +#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */ + +/* + * This function should be called during kernel startup to initialize + * the BFin IRQ handling routines. + */ +int __init init_arch_irq(void) +{ + int irq; + unsigned long ilat = 0; + /* Disable all the peripheral intrs - page 4-29 HW Ref manual */ + bfin_write_SIC_IMASK(SIC_UNMASK_ALL); + SSYNC(); + + local_irq_disable(); + +#ifndef CONFIG_KGDB + bfin_write_EVT0(evt_emulation); +#endif + bfin_write_EVT2(evt_evt2); + bfin_write_EVT3(trap); + bfin_write_EVT5(evt_ivhw); + bfin_write_EVT6(evt_timer); + bfin_write_EVT7(evt_evt7); + bfin_write_EVT8(evt_evt8); + bfin_write_EVT9(evt_evt9); + bfin_write_EVT10(evt_evt10); + bfin_write_EVT11(evt_evt11); + bfin_write_EVT12(evt_evt12); + bfin_write_EVT13(evt_evt13); + bfin_write_EVT14(evt14_softirq); + bfin_write_EVT15(evt_system_call); + CSYNC(); + + for (irq = 0; irq < SYS_IRQS; irq++) { + if (irq <= IRQ_CORETMR) + set_irq_chip(irq, &bfin_core_irqchip); + else + set_irq_chip(irq, &bfin_internal_irqchip); +#ifdef BF537_GENERIC_ERROR_INT_DEMUX + if (irq != IRQ_GENERIC_ERROR) { +#endif + +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO + if ((irq != IRQ_PROG_INTA) /*PORT F & G MASK_A Interrupt*/ +# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) + && (irq != IRQ_MAC_RX) /*PORT H MASK_A Interrupt*/ +# endif + ) { +#endif + set_irq_handler(irq, handle_simple_irq); +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO + } else { + set_irq_chained_handler(irq, + bfin_demux_gpio_irq); + } +#endif + +#ifdef BF537_GENERIC_ERROR_INT_DEMUX + } else { + set_irq_handler(irq, bfin_demux_error_irq); + } +#endif + } +#ifdef BF537_GENERIC_ERROR_INT_DEMUX + for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) { + set_irq_chip(irq, &bfin_generic_error_irqchip); + set_irq_handler(irq, handle_level_irq); + } +#endif + +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO + for (irq = IRQ_PF0; irq < NR_IRQS; irq++) { + set_irq_chip(irq, &bfin_gpio_irqchip); + /* if configured as edge, then will be changed to do_edge_IRQ */ + set_irq_handler(irq, handle_level_irq); + } +#endif + bfin_write_IMASK(0); + CSYNC(); + ilat = bfin_read_ILAT(); + CSYNC(); + bfin_write_ILAT(ilat); + CSYNC(); + + printk(KERN_INFO + "Configuring Blackfin Priority Driven Interrupts\n"); + /* IMASK=xxx is equivalent to STI xx or irq_flags=xx, + * local_irq_enable() + */ + program_IAR(); + /* Therefore it's better to setup IARs before interrupts enabled */ + search_IAR(); + + /* Enable interrupts IVG7-15 */ + irq_flags = irq_flags | IMASK_IVG15 | + IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | + IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | + IMASK_IVGHW; + + return 0; +} + +#ifdef CONFIG_DO_IRQ_L1 +void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text)); +#endif + +void do_irq(int vec, struct pt_regs *fp) +{ + if (vec == EVT_IVTMR_P) { + vec = IRQ_CORETMR; + } else { + struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; + struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; + unsigned long sic_status; + + SSYNC(); + sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); + + for (;; ivg++) { + if (ivg >= ivg_stop) { + atomic_inc(&num_spurious); + return; + } else if (sic_status & ivg->isrflag) + break; + } + vec = ivg->irqno; + } + asm_do_IRQ(vec, fp); + +#ifdef CONFIG_KGDB + kgdb_process_breakpoint(); +#endif +} diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c new file mode 100644 index 0000000000..f05e3dadaf --- /dev/null +++ b/arch/blackfin/mach-common/irqpanic.c @@ -0,0 +1,194 @@ +/* + * File: arch/blackfin/mach-common/irqpanic.c + * Based on: + * Author: + * + * Created: ? + * Description: panic kernel with dump information + * + * Modified: rgetz - added cache checking code 14Feb06 + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +#include "../oprofile/op_blackfin.h" + +#ifdef CONFIG_DEBUG_ICACHE_CHECK +#define L1_ICACHE_START 0xffa10000 +#define L1_ICACHE_END 0xffa13fff +void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text)); +#endif + +/* + * irq_panic - calls panic with string setup + */ +asmlinkage void irq_panic(int reason, struct pt_regs *regs) +{ + int sig = 0; + siginfo_t info; + +#ifdef CONFIG_DEBUG_ICACHE_CHECK + unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa; + unsigned short i, j, die; + unsigned int bad[10][6]; + + /* check entire cache for coherency + * Since printk is in cacheable memory, + * don't call it until you have checked everything + */ + + die = 0; + i = 0; + + /* check icache */ + + for (ca = L1_ICACHE_START; ca <= L1_ICACHE_END && i < 10; ca += 32) { + + /* Grab various address bits for the itest_cmd fields */ + cmd = (((ca & 0x3000) << 4) | /* ca[13:12] for SBNK[1:0] */ + ((ca & 0x0c00) << 16) | /* ca[11:10] for WAYSEL[1:0] */ + ((ca & 0x3f8)) | /* ca[09:03] for SET[4:0] and DW[1:0] */ + 0); /* Access Tag, Read access */ + + SSYNC(); + bfin_write_ITEST_COMMAND(cmd); + SSYNC(); + tag = bfin_read_ITEST_DATA0(); + SSYNC(); + + /* if tag is marked as valid, check it */ + if (tag & 1) { + /* The icache is arranged in 4 groups of 64-bits */ + for (j = 0; j < 32; j += 8) { + cmd = ((((ca + j) & 0x3000) << 4) | /* ca[13:12] for SBNK[1:0] */ + (((ca + j) & 0x0c00) << 16) | /* ca[11:10] for WAYSEL[1:0] */ + (((ca + j) & 0x3f8)) | /* ca[09:03] for SET[4:0] and DW[1:0] */ + 4); /* Access Data, Read access */ + + SSYNC(); + bfin_write_ITEST_COMMAND(cmd); + SSYNC(); + + cache_hi = bfin_read_ITEST_DATA1(); + cache_lo = bfin_read_ITEST_DATA0(); + + pa = ((unsigned int *)((tag & 0xffffcc00) | + ((ca + j) & ~(0xffffcc00)))); + + /* + * Debugging this, enable + * + * printk("addr: %08x %08x%08x | %08x%08x\n", + * ((unsigned int *)((tag & 0xffffcc00) | ((ca+j) & ~(0xffffcc00)))), + * cache_hi, cache_lo, *(pa+1), *pa); + */ + + if (cache_hi != *(pa + 1) || cache_lo != *pa) { + /* Since icache is not working, stay out of it, by not printing */ + die = 1; + bad[i][0] = (ca + j); + bad[i][1] = cache_hi; + bad[i][2] = cache_lo; + bad[i][3] = ((tag & 0xffffcc00) | + ((ca + j) & ~(0xffffcc00))); + bad[i][4] = *(pa + 1); + bad[i][5] = *(pa); + i++; + } + } + } + } + if (die) { + printk(KERN_EMERG "icache coherency error\n"); + for (j = 0; j <= i; j++) { + printk(KERN_EMERG + "cache address : %08x cache value : %08x%08x\n", + bad[j][0], bad[j][1], bad[j][2]); + printk(KERN_EMERG + "physical address: %08x SDRAM value : %08x%08x\n", + bad[j][3], bad[j][4], bad[j][5]); + } + panic("icache coherency error"); + } else { + printk(KERN_EMERG "icache checked, and OK\n"); + } +#endif + + printk(KERN_EMERG "\n"); + printk(KERN_EMERG "Exception: IRQ 0x%x entered\n", reason); + printk(KERN_EMERG " code=[0x%08lx], stack frame=0x%08lx, " + " bad PC=0x%08lx\n", + (unsigned long)regs->seqstat, + (unsigned long)regs, + (unsigned long)regs->pc); + if (reason == 0x5) { + printk(KERN_EMERG "----------- HARDWARE ERROR -----------\n"); + + /* There is only need to check for Hardware Errors, since other + * EXCEPTIONS are handled in TRAPS.c (MH) + */ + switch (regs->seqstat & SEQSTAT_HWERRCAUSE) { + case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */ + info.si_code = BUS_ADRALN; + sig = SIGBUS; + printk(KERN_EMERG HWC_x2); + break; + case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */ + info.si_code = BUS_ADRERR; + sig = SIGBUS; + printk(KERN_EMERG HWC_x3); + break; + case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */ + printk(KERN_EMERG HWC_x12); + break; + case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */ + printk(KERN_EMERG HWC_x18); + break; + default: /* Reserved */ + printk(KERN_EMERG HWC_default); + break; + } + } + + regs->ipend = bfin_read_IPEND(); + dump_bfin_regs(regs, (void *)regs->pc); + if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */ + panic("Unhandled IRQ or exceptions!\n"); + else { /* in userspace */ + info.si_errno = 0; + info.si_addr = (void *)regs->pc; + force_sig_info(sig, &info, current); + } +} + +#ifdef CONFIG_HARDWARE_PM +/* + * call the handler of Performance overflow + */ +asmlinkage void pm_overflow(int irq, struct pt_regs *regs) +{ + pm_overflow_handler(irq, regs); +} +#endif diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S new file mode 100644 index 0000000000..2cbb15b339 --- /dev/null +++ b/arch/blackfin/mach-common/lock.S @@ -0,0 +1,204 @@ +/* + * File: arch/blackfin/mach-common/lock.S + * Based on: + * Author: LG Soft India + * + * Created: ? + * Description: kernel locks + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +.text + +#ifdef CONFIG_BLKFIN_CACHE_LOCK + +/* When you come here, it is assumed that + * R0 - Which way to be locked + */ + +ENTRY(_cache_grab_lock) + + [--SP]=( R7:0,P5:0 ); + + P1.H = (IMEM_CONTROL >> 16); + P1.L = (IMEM_CONTROL & 0xFFFF); + P5.H = (ICPLB_ADDR0 >> 16); + P5.L = (ICPLB_ADDR0 & 0xFFFF); + P4.H = (ICPLB_DATA0 >> 16); + P4.L = (ICPLB_DATA0 & 0xFFFF); + R7 = R0; + + /* If the code of interest already resides in the cache + * invalidate the entire cache itself. + * invalidate_entire_icache; + */ + + SP += -12; + [--SP] = RETS; + CALL _invalidate_entire_icache; + RETS = [SP++]; + SP += 12; + + /* Disable the Interrupts*/ + + CLI R3; + +.LLOCK_WAY: + + /* Way0 - 0xFFA133E0 + * Way1 - 0xFFA137E0 + * Way2 - 0xFFA13BE0 Total Way Size = 4K + * Way3 - 0xFFA13FE0 + */ + + /* Procedure Ex. -Set the locks for other ways by setting ILOC[3:1] + * Only Way0 of the instruction cache can now be + * replaced by a new code + */ + + R5 = R7; + CC = BITTST(R7,0); + IF CC JUMP .LCLEAR1; + R7 = 0; + BITSET(R7,0); + JUMP .LDONE1; + +.LCLEAR1: + R7 = 0; + BITCLR(R7,0); +.LDONE1: R4 = R7 << 3; + R7 = [P1]; + R7 = R7 | R4; + SSYNC; /* SSYNC required writing to IMEM_CONTROL. */ + .align 8; + [P1] = R7; + SSYNC; + + R7 = R5; + CC = BITTST(R7,1); + IF CC JUMP .LCLEAR2; + R7 = 0; + BITSET(R7,1); + JUMP .LDONE2; + +.LCLEAR2: + R7 = 0; + BITCLR(R7,1); +.LDONE2: R4 = R7 << 3; + R7 = [P1]; + R7 = R7 | R4; + SSYNC; /* SSYNC required writing to IMEM_CONTROL. */ + .align 8; + [P1] = R7; + SSYNC; + + R7 = R5; + CC = BITTST(R7,2); + IF CC JUMP .LCLEAR3; + R7 = 0; + BITSET(R7,2); + JUMP .LDONE3; +.LCLEAR3: + R7 = 0; + BITCLR(R7,2); +.LDONE3: R4 = R7 << 3; + R7 = [P1]; + R7 = R7 | R4; + SSYNC; /* SSYNC required writing to IMEM_CONTROL. */ + .align 8; + [P1] = R7; + SSYNC; + + + R7 = R5; + CC = BITTST(R7,3); + IF CC JUMP .LCLEAR4; + R7 = 0; + BITSET(R7,3); + JUMP .LDONE4; +.LCLEAR4: + R7 = 0; + BITCLR(R7,3); +.LDONE4: R4 = R7 << 3; + R7 = [P1]; + R7 = R7 | R4; + SSYNC; /* SSYNC required writing to IMEM_CONTROL. */ + .align 8; + [P1] = R7; + SSYNC; + + STI R3; + + ( R7:0,P5:0 ) = [SP++]; + + RTS; + +/* After the execution of critical code, the code is now locked into + * the cache way. Now we need to set ILOC. + * + * R0 - Which way to be locked + */ + +ENTRY(_cache_lock) + + [--SP]=( R7:0,P5:0 ); + + P1.H = (IMEM_CONTROL >> 16); + P1.L = (IMEM_CONTROL & 0xFFFF); + + /* Disable the Interrupts*/ + CLI R3; + + R7 = [P1]; + R2 = 0xFFFFFF87 (X); + R7 = R7 & R2; + R0 = R0 << 3; + R7 = R0 | R7; + SSYNC; /* SSYNC required writing to IMEM_CONTROL. */ + .align 8; + [P1] = R7; + SSYNC; + /* Renable the Interrupts */ + STI R3; + + ( R7:0,P5:0 ) = [SP++]; + RTS; + +#endif /* BLKFIN_CACHE_LOCK */ + +/* Return the ILOC bits of IMEM_CONTROL + */ + +ENTRY(_read_iloc) + + P1.H = (IMEM_CONTROL >> 16); + P1.L = (IMEM_CONTROL & 0xFFFF); + R1 = 0xF; + R0 = [P1]; + R0 = R0 >> 3; + R0 = R0 & R1; + + RTS; diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c new file mode 100644 index 0000000000..deb27272c6 --- /dev/null +++ b/arch/blackfin/mach-common/pm.c @@ -0,0 +1,181 @@ +/* + * File: arch/blackfin/mach-common/pm.c + * Based on: arm/mach-omap/pm.c + * Author: Cliff Brake Copyright (c) 2001 + * + * Created: 2001 + * Description: Power management for the bfin + * + * Modified: Nicolas Pitre - PXA250 support + * Copyright (c) 2002 Monta Vista Software, Inc. + * David Singleton - OMAP1510 + * Copyright (c) 2002 Monta Vista Software, Inc. + * Dirk Behme - OMAP1510/1610 + * Copyright 2004 + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +#include +#include +#include + + +#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H +#define WAKEUP_TYPE PM_WAKE_HIGH +#endif + +#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_L +#define WAKEUP_TYPE PM_WAKE_LOW +#endif + +#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_F +#define WAKEUP_TYPE PM_WAKE_FALLING +#endif + +#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_R +#define WAKEUP_TYPE PM_WAKE_RISING +#endif + +#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_B +#define WAKEUP_TYPE PM_WAKE_BOTH_EDGES +#endif + +void bfin_pm_suspend_standby_enter(void) +{ +#ifdef CONFIG_PM_WAKEUP_BY_GPIO + gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE); +#endif + +#if defined(CONFIG_PM_WAKEUP_BY_GPIO) || defined(CONFIG_PM_WAKEUP_GPIO_API) + { + u32 flags; + + local_irq_save(flags); + + sleep_deeper(gpio_pm_setup()); /*Goto Sleep*/ + + gpio_pm_restore(); + + bfin_write_SIC_IWR(IWR_ENABLE_ALL); + + local_irq_restore(flags); + } +#endif + +#if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR) + sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR); + bfin_write_SIC_IWR(IWR_ENABLE_ALL); +#endif /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */ +} + + +/* + * bfin_pm_prepare - Do preliminary suspend work. + * @state: suspend state we're entering. + * + */ +static int bfin_pm_prepare(suspend_state_t state) +{ + int error = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + break; + case PM_SUSPEND_MEM: + return -ENOTSUPP; + + case PM_SUSPEND_DISK: + return -ENOTSUPP; + + default: + return -EINVAL; + } + + return error; +} + +/* + * bfin_pm_enter - Actually enter a sleep state. + * @state: State we're entering. + * + */ +static int bfin_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + bfin_pm_suspend_standby_enter(); + break; + case PM_SUSPEND_MEM: + return -ENOTSUPP; + + case PM_SUSPEND_DISK: + return -ENOTSUPP; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * bfin_pm_finish - Finish up suspend sequence. + * @state: State we're coming out of. + * + * This is called after we wake back up (or if entering the sleep state + * failed). + */ +static int bfin_pm_finish(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + break; + + case PM_SUSPEND_MEM: + return -ENOTSUPP; + + case PM_SUSPEND_DISK: + return -ENOTSUPP; + + default: + return -EINVAL; + } + + return 0; +} + +struct pm_ops bfin_pm_ops = { + .pm_disk_mode = PM_DISK_PLATFORM, + .prepare = bfin_pm_prepare, + .enter = bfin_pm_enter, + .finish = bfin_pm_finish, +}; + +static int __init bfin_pm_init(void) +{ + pm_set_ops(&bfin_pm_ops); + return 0; +} + +__initcall(bfin_pm_init); diff --git a/arch/blackfin/mm/Makefile b/arch/blackfin/mm/Makefile new file mode 100644 index 0000000000..2a7202ce01 --- /dev/null +++ b/arch/blackfin/mm/Makefile @@ -0,0 +1,5 @@ +# +# arch/blackfin/mm/Makefile +# + +obj-y := blackfin_sram.o init.o diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c new file mode 100644 index 0000000000..dd0c6501c4 --- /dev/null +++ b/arch/blackfin/mm/blackfin_sram.c @@ -0,0 +1,540 @@ +/* + * File: arch/blackfin/mm/blackfin_sram.c + * Based on: + * Author: + * + * Created: + * Description: SRAM driver for Blackfin ADSP-BF5xx + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "blackfin_sram.h" + +spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock; + +#if CONFIG_L1_MAX_PIECE < 16 +#undef CONFIG_L1_MAX_PIECE +#define CONFIG_L1_MAX_PIECE 16 +#endif + +#if CONFIG_L1_MAX_PIECE > 1024 +#undef CONFIG_L1_MAX_PIECE +#define CONFIG_L1_MAX_PIECE 1024 +#endif + +#define SRAM_SLT_NULL 0 +#define SRAM_SLT_FREE 1 +#define SRAM_SLT_ALLOCATED 2 + +/* the data structure for L1 scratchpad and DATA SRAM */ +struct l1_sram_piece { + void *paddr; + int size; + int flag; +}; + +static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE]; + +#if L1_DATA_A_LENGTH != 0 +static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE]; +#endif + +#if L1_DATA_B_LENGTH != 0 +static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE]; +#endif + +#if L1_CODE_LENGTH != 0 +static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE]; +#endif + +/* L1 Scratchpad SRAM initialization function */ +void l1sram_init(void) +{ + printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n", + L1_SCRATCH_LENGTH >> 10); + + memset(&l1_ssram, 0x00, sizeof(l1_ssram)); + l1_ssram[0].paddr = (void*)L1_SCRATCH_START; + l1_ssram[0].size = L1_SCRATCH_LENGTH; + l1_ssram[0].flag = SRAM_SLT_FREE; + + /* mutex initialize */ + spin_lock_init(&l1sram_lock); +} + +void l1_data_sram_init(void) +{ +#if L1_DATA_A_LENGTH != 0 + printk(KERN_INFO "Blackfin DATA_A SRAM: %d KB\n", + L1_DATA_A_LENGTH >> 10); + + memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram)); + l1_data_A_sram[0].paddr = (void*)L1_DATA_A_START + + (_ebss_l1 - _sdata_l1); + l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1); + l1_data_A_sram[0].flag = SRAM_SLT_FREE; +#endif +#if L1_DATA_B_LENGTH != 0 + printk(KERN_INFO "Blackfin DATA_B SRAM: %d KB\n", + L1_DATA_B_LENGTH >> 10); + + memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram)); + l1_data_B_sram[0].paddr = (void*)L1_DATA_B_START; + l1_data_B_sram[0].size = L1_DATA_B_LENGTH; + l1_data_B_sram[0].flag = SRAM_SLT_FREE; +#endif + + /* mutex initialize */ + spin_lock_init(&l1_data_sram_lock); +} + +void l1_inst_sram_init(void) +{ +#if L1_CODE_LENGTH != 0 + printk(KERN_INFO "Blackfin Instruction SRAM: %d KB\n", + L1_CODE_LENGTH >> 10); + + memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram)); + l1_inst_sram[0].paddr = (void*)L1_CODE_START + (_etext_l1 - _stext_l1); + l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1); + l1_inst_sram[0].flag = SRAM_SLT_FREE; +#endif + + /* mutex initialize */ + spin_lock_init(&l1_inst_sram_lock); +} + +/* L1 memory allocate function */ +static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count) +{ + int i, index = 0; + void *addr = NULL; + + if (size <= 0) + return NULL; + + /* Align the size */ + size = (size + 3) & ~3; + + /* not use the good method to match the best slot !!! */ + /* search an available memeory slot */ + for (i = 0; i < count; i++) { + if ((pfree[i].flag == SRAM_SLT_FREE) + && (pfree[i].size >= size)) { + addr = pfree[i].paddr; + pfree[i].flag = SRAM_SLT_ALLOCATED; + index = i; + break; + } + } + if (i >= count) + return NULL; + + /* updated the NULL memeory slot !!! */ + if (pfree[i].size > size) { + for (i = 0; i < count; i++) { + if (pfree[i].flag == SRAM_SLT_NULL) { + pfree[i].flag = SRAM_SLT_FREE; + pfree[i].paddr = addr + size; + pfree[i].size = pfree[index].size - size; + pfree[index].size = size; + break; + } + } + } + + return addr; +} + +/* Allocate the largest available block. */ +static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count, + unsigned long *psize) +{ + unsigned long best = 0; + int i, index = -1; + void *addr = NULL; + + /* search an available memeory slot */ + for (i = 0; i < count; i++) { + if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) { + addr = pfree[i].paddr; + index = i; + best = pfree[i].size; + } + } + if (index < 0) + return NULL; + *psize = best; + + pfree[index].flag = SRAM_SLT_ALLOCATED; + return addr; +} + +/* L1 memory free function */ +static int _l1_sram_free(const void *addr, + struct l1_sram_piece *pfree, int count) +{ + int i, index = 0; + + /* search the relevant memory slot */ + for (i = 0; i < count; i++) { + if (pfree[i].paddr == addr) { + if (pfree[i].flag != SRAM_SLT_ALLOCATED) { + /* error log */ + return -1; + } + index = i; + break; + } + } + if (i >= count) + return -1; + + pfree[index].flag = SRAM_SLT_FREE; + + /* link the next address slot */ + for (i = 0; i < count; i++) { + if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr) + && (pfree[i].flag == SRAM_SLT_FREE)) { + pfree[i].flag = SRAM_SLT_NULL; + pfree[index].size += pfree[i].size; + pfree[index].flag = SRAM_SLT_FREE; + break; + } + } + + /* link the last address slot */ + for (i = 0; i < count; i++) { + if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) && + (pfree[i].flag == SRAM_SLT_FREE)) { + pfree[index].flag = SRAM_SLT_NULL; + pfree[i].size += pfree[index].size; + break; + } + } + + return 0; +} + +int sram_free(const void *addr) +{ + if (0) {} +#if L1_CODE_LENGTH != 0 + else if (addr >= (void *)L1_CODE_START + && addr < (void *)(L1_CODE_START + L1_CODE_LENGTH)) + return l1_inst_sram_free(addr); +#endif +#if L1_DATA_A_LENGTH != 0 + else if (addr >= (void *)L1_DATA_A_START + && addr < (void *)(L1_DATA_A_START + L1_DATA_A_LENGTH)) + return l1_data_A_sram_free(addr); +#endif +#if L1_DATA_B_LENGTH != 0 + else if (addr >= (void *)L1_DATA_B_START + && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH)) + return l1_data_B_sram_free(addr); +#endif + else + return -1; +} +EXPORT_SYMBOL(sram_free); + +void *l1_data_A_sram_alloc(size_t size) +{ + unsigned flags; + void *addr = NULL; + + /* add mutex operation */ + spin_lock_irqsave(&l1_data_sram_lock, flags); + +#if L1_DATA_A_LENGTH != 0 + addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)); +#endif + + /* add mutex operation */ + spin_unlock_irqrestore(&l1_data_sram_lock, flags); + + pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n", + (long unsigned int)addr, size); + + return addr; +} +EXPORT_SYMBOL(l1_data_A_sram_alloc); + +int l1_data_A_sram_free(const void *addr) +{ + unsigned flags; + int ret; + + /* add mutex operation */ + spin_lock_irqsave(&l1_data_sram_lock, flags); + +#if L1_DATA_A_LENGTH != 0 + ret = _l1_sram_free(addr, + l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)); +#else + ret = -1; +#endif + + /* add mutex operation */ + spin_unlock_irqrestore(&l1_data_sram_lock, flags); + + return ret; +} +EXPORT_SYMBOL(l1_data_A_sram_free); + +void *l1_data_B_sram_alloc(size_t size) +{ +#if L1_DATA_B_LENGTH != 0 + unsigned flags; + void *addr; + + /* add mutex operation */ + spin_lock_irqsave(&l1_data_sram_lock, flags); + + addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)); + + /* add mutex operation */ + spin_unlock_irqrestore(&l1_data_sram_lock, flags); + + pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n", + (long unsigned int)addr, size); + + return addr; +#else + return NULL; +#endif +} +EXPORT_SYMBOL(l1_data_B_sram_alloc); + +int l1_data_B_sram_free(const void *addr) +{ +#if L1_DATA_B_LENGTH != 0 + unsigned flags; + int ret; + + /* add mutex operation */ + spin_lock_irqsave(&l1_data_sram_lock, flags); + + ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)); + + /* add mutex operation */ + spin_unlock_irqrestore(&l1_data_sram_lock, flags); + + return ret; +#else + return -1; +#endif +} +EXPORT_SYMBOL(l1_data_B_sram_free); + +void *l1_data_sram_alloc(size_t size) +{ + void *addr = l1_data_A_sram_alloc(size); + + if (!addr) + addr = l1_data_B_sram_alloc(size); + + return addr; +} +EXPORT_SYMBOL(l1_data_sram_alloc); + +void *l1_data_sram_zalloc(size_t size) +{ + void *addr = l1_data_sram_alloc(size); + + if (addr) + memset(addr, 0x00, size); + + return addr; +} +EXPORT_SYMBOL(l1_data_sram_zalloc); + +int l1_data_sram_free(const void *addr) +{ + int ret; + ret = l1_data_A_sram_free(addr); + if (ret == -1) + ret = l1_data_B_sram_free(addr); + return ret; +} +EXPORT_SYMBOL(l1_data_sram_free); + +void *l1_inst_sram_alloc(size_t size) +{ +#if L1_DATA_A_LENGTH != 0 + unsigned flags; + void *addr; + + /* add mutex operation */ + spin_lock_irqsave(&l1_inst_sram_lock, flags); + + addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram)); + + /* add mutex operation */ + spin_unlock_irqrestore(&l1_inst_sram_lock, flags); + + pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n", + (long unsigned int)addr, size); + + return addr; +#else + return NULL; +#endif +} +EXPORT_SYMBOL(l1_inst_sram_alloc); + +int l1_inst_sram_free(const void *addr) +{ +#if L1_CODE_LENGTH != 0 + unsigned flags; + int ret; + + /* add mutex operation */ + spin_lock_irqsave(&l1_inst_sram_lock, flags); + + ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram)); + + /* add mutex operation */ + spin_unlock_irqrestore(&l1_inst_sram_lock, flags); + + return ret; +#else + return -1; +#endif +} +EXPORT_SYMBOL(l1_inst_sram_free); + +/* L1 Scratchpad memory allocate function */ +void *l1sram_alloc(size_t size) +{ + unsigned flags; + void *addr; + + /* add mutex operation */ + spin_lock_irqsave(&l1sram_lock, flags); + + addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram)); + + /* add mutex operation */ + spin_unlock_irqrestore(&l1sram_lock, flags); + + return addr; +} + +/* L1 Scratchpad memory allocate function */ +void *l1sram_alloc_max(size_t *psize) +{ + unsigned flags; + void *addr; + + /* add mutex operation */ + spin_lock_irqsave(&l1sram_lock, flags); + + addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize); + + /* add mutex operation */ + spin_unlock_irqrestore(&l1sram_lock, flags); + + return addr; +} + +/* L1 Scratchpad memory free function */ +int l1sram_free(const void *addr) +{ + unsigned flags; + int ret; + + /* add mutex operation */ + spin_lock_irqsave(&l1sram_lock, flags); + + ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram)); + + /* add mutex operation */ + spin_unlock_irqrestore(&l1sram_lock, flags); + + return ret; +} + +int sram_free_with_lsl(const void *addr) +{ + struct sram_list_struct *lsl, **tmp; + struct mm_struct *mm = current->mm; + + for (tmp = &mm->context.sram_list; *tmp; tmp = &(*tmp)->next) + if ((*tmp)->addr == addr) + goto found; + return -1; +found: + lsl = *tmp; + sram_free(addr); + *tmp = lsl->next; + kfree(lsl); + + return 0; +} +EXPORT_SYMBOL(sram_free_with_lsl); + +void *sram_alloc_with_lsl(size_t size, unsigned long flags) +{ + void *addr = NULL; + struct sram_list_struct *lsl = NULL; + struct mm_struct *mm = current->mm; + + lsl = kmalloc(sizeof(struct sram_list_struct), GFP_KERNEL); + if (!lsl) + return NULL; + memset(lsl, 0, sizeof(*lsl)); + + if (flags & L1_INST_SRAM) + addr = l1_inst_sram_alloc(size); + + if (addr == NULL && (flags & L1_DATA_A_SRAM)) + addr = l1_data_A_sram_alloc(size); + + if (addr == NULL && (flags & L1_DATA_B_SRAM)) + addr = l1_data_B_sram_alloc(size); + + if (addr == NULL) { + kfree(lsl); + return NULL; + } + lsl->addr = addr; + lsl->length = size; + lsl->next = mm->context.sram_list; + mm->context.sram_list = lsl; + return addr; +} +EXPORT_SYMBOL(sram_alloc_with_lsl); diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h new file mode 100644 index 0000000000..0fb73b78dd --- /dev/null +++ b/arch/blackfin/mm/blackfin_sram.h @@ -0,0 +1,38 @@ +/* + * File: arch/blackfin/mm/blackfin_sram.h + * Based on: arch/blackfin/mm/blackfin_sram.c + * Author: Mike Frysinger + * + * Created: Aug 2006 + * Description: Local prototypes meant for internal use only + * + * Modified: + * Copyright 2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __BLACKFIN_SRAM_H__ +#define __BLACKFIN_SRAM_H__ + +extern void l1sram_init(void); +extern void l1_inst_sram_init(void); +extern void l1_data_sram_init(void); +extern void *l1sram_alloc(size_t); + +#endif diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c new file mode 100644 index 0000000000..73f72abed4 --- /dev/null +++ b/arch/blackfin/mm/init.c @@ -0,0 +1,208 @@ +/* + * File: arch/blackfin/mm/init.c + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include "blackfin_sram.h" + +/* + * BAD_PAGE is the page that is used for page faults when linux + * is out-of-memory. Older versions of linux just did a + * do_exit(), but using this instead means there is less risk + * for a process dying in kernel mode, possibly leaving a inode + * unused etc.. + * + * BAD_PAGETABLE is the accompanying page-table: it is initialized + * to point to BAD_PAGE entries. + * + * ZERO_PAGE is a special page that is used for zero-initialized + * data and COW. + */ +static unsigned long empty_bad_page_table; + +static unsigned long empty_bad_page; + +unsigned long empty_zero_page; + +void show_mem(void) +{ + unsigned long i; + int free = 0, total = 0, reserved = 0, shared = 0; + + int cached = 0; + printk(KERN_INFO "Mem-info:\n"); + show_free_areas(); + i = max_mapnr; + while (i-- > 0) { + total++; + if (PageReserved(mem_map + i)) + reserved++; + else if (PageSwapCache(mem_map + i)) + cached++; + else if (!page_count(mem_map + i)) + free++; + else + shared += page_count(mem_map + i) - 1; + } + printk(KERN_INFO "%d pages of RAM\n", total); + printk(KERN_INFO "%d free pages\n", free); + printk(KERN_INFO "%d reserved pages\n", reserved); + printk(KERN_INFO "%d pages shared\n", shared); + printk(KERN_INFO "%d pages swap cached\n", cached); +} + +/* + * paging_init() continues the virtual memory environment setup which + * was begun by the code in arch/head.S. + * The parameters are pointers to where to stick the starting and ending + * addresses of available kernel virtual memory. + */ +void paging_init(void) +{ + /* + * make sure start_mem is page aligned, otherwise bootmem and + * page_alloc get different views og the world + */ + unsigned long end_mem = memory_end & PAGE_MASK; + + pr_debug("start_mem is %#lx virtual_end is %#lx\n", PAGE_ALIGN(memory_start), end_mem); + + /* + * initialize the bad page table and bad page to point + * to a couple of allocated pages + */ + empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + memset((void *)empty_zero_page, 0, PAGE_SIZE); + + /* + * Set up SFC/DFC registers (user data space) + */ + set_fs(KERNEL_DS); + + pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n", + PAGE_ALIGN(memory_start), end_mem); + + { + unsigned long zones_size[MAX_NR_ZONES] = { 0, }; + + zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = 0; +#endif + free_area_init(zones_size); + } +} + +void mem_init(void) +{ + unsigned int codek = 0, datak = 0, initk = 0; + unsigned long tmp; + unsigned int len = _ramend - _rambase; + unsigned long start_mem = memory_start; + unsigned long end_mem = memory_end; + + end_mem &= PAGE_MASK; + high_memory = (void *)end_mem; + + start_mem = PAGE_ALIGN(start_mem); + max_mapnr = num_physpages = MAP_NR(high_memory); + printk(KERN_INFO "Physical pages: %lx\n", num_physpages); + + /* This will put all memory onto the freelists. */ + totalram_pages = free_all_bootmem(); + + codek = (_etext - _stext) >> 10; + datak = (__bss_stop - __bss_start) >> 10; + initk = (__init_end - __init_begin) >> 10; + + tmp = nr_free_pages() << PAGE_SHIFT; + printk(KERN_INFO + "Memory available: %luk/%uk RAM, (%uk init code, %uk kernel code, %uk data, %uk dma)\n", + tmp >> 10, len >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10); + + /* Initialize the blackfin L1 Memory. */ + l1sram_init(); + l1_data_sram_init(); + l1_inst_sram_init(); + + /* Allocate this once; never free it. We assume this gives us a + pointer to the start of L1 scratchpad memory; panic if it + doesn't. */ + tmp = (unsigned long)l1sram_alloc(sizeof(struct l1_scratch_task_info)); + if (tmp != (unsigned long)L1_SCRATCH_TASK_INFO) { + printk(KERN_EMERG "mem_init(): Did not get the right address from l1sram_alloc: %08lx != %08lx\n", + tmp, (unsigned long)L1_SCRATCH_TASK_INFO); + panic("No L1, time to give up\n"); + } +} + +#ifdef CONFIG_BLK_DEV_INITRD +void free_initrd_mem(unsigned long start, unsigned long end) +{ + int pages = 0; + for (; start < end; start += PAGE_SIZE) { + ClearPageReserved(virt_to_page(start)); + init_page_count(virt_to_page(start)); + free_page(start); + totalram_pages++; + pages++; + } + printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages); +} +#endif + +void free_initmem(void) +{ +#ifdef CONFIG_RAMKERNEL + unsigned long addr; +/* + * the following code should be cool even if these sections + * are not page aligned. + */ + addr = PAGE_ALIGN((unsigned long)(__init_begin)); + /* next to check that the page we free is not a partial page */ + for (; addr + PAGE_SIZE < (unsigned long)(__init_end); + addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + init_page_count(virt_to_page(addr)); + free_page(addr); + totalram_pages++; + } + printk(KERN_NOTICE + "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", + (addr - PAGE_ALIGN((long)__init_begin)) >> 10, + (int)(PAGE_ALIGN((unsigned long)(__init_begin))), + (int)(addr - PAGE_SIZE)); +#endif +} diff --git a/arch/blackfin/oprofile/Kconfig b/arch/blackfin/oprofile/Kconfig new file mode 100644 index 0000000000..0a2fd999c9 --- /dev/null +++ b/arch/blackfin/oprofile/Kconfig @@ -0,0 +1,29 @@ +menu "Profiling support" +depends on EXPERIMENTAL + +config PROFILING + bool "Profiling support (EXPERIMENTAL)" + help + Say Y here to enable the extended profiling support mechanisms used + by profilers such as OProfile. + +config OPROFILE + tristate "OProfile system profiling (EXPERIMENTAL)" + depends on PROFILING + help + OProfile is a profiling system capable of profiling the + whole system, include the kernel, kernel modules, libraries, + and applications. + + If unsure, say N. + +config HARDWARE_PM + tristate "Hardware Performance Monitor Profiling" + depends on PROFILING + help + take use of hardware performance monitor to profiling the kernel + and application. + + If unsure, say N. + +endmenu diff --git a/arch/blackfin/oprofile/Makefile b/arch/blackfin/oprofile/Makefile new file mode 100644 index 0000000000..634e300d67 --- /dev/null +++ b/arch/blackfin/oprofile/Makefile @@ -0,0 +1,14 @@ +# +# arch/blackfin/oprofile/Makefile +# + +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +oprofile-y := $(DRIVER_OBJS) common.o +oprofile-$(CONFIG_HARDWARE_PM) += op_model_bf533.o diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c new file mode 100644 index 0000000000..009a1700c8 --- /dev/null +++ b/arch/blackfin/oprofile/common.c @@ -0,0 +1,168 @@ +/* + * File: arch/blackfin/oprofile/common.c + * Based on: arch/alpha/oprofile/common.c + * Author: Anton Blanchard + * + * Created: + * Description: + * + * Modified: + * Copyright (C) 2004 Anton Blanchard , IBM + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "op_blackfin.h" + +#define BFIN_533_ID 0xE5040003 +#define BFIN_537_ID 0xE5040002 + +static int pfmon_enabled; +static struct mutex pfmon_lock; + +struct op_bfin533_model *model; + +struct op_counter_config ctr[OP_MAX_COUNTER]; + +static int op_bfin_setup(void) +{ + int ret; + + /* Pre-compute the values to stuff in the hardware registers. */ + spin_lock(&oprofilefs_lock); + ret = model->reg_setup(ctr); + spin_unlock(&oprofilefs_lock); + + return ret; +} + +static void op_bfin_shutdown(void) +{ +#if 0 + /* what is the difference between shutdown and stop? */ +#endif +} + +static int op_bfin_start(void) +{ + int ret = -EBUSY; + + printk(KERN_INFO "KSDBG:in %s\n", __FUNCTION__); + mutex_lock(&pfmon_lock); + if (!pfmon_enabled) { + ret = model->start(ctr); + pfmon_enabled = !ret; + } + mutex_unlock(&pfmon_lock); + + return ret; +} + +static void op_bfin_stop(void) +{ + mutex_lock(&pfmon_lock); + if (pfmon_enabled) { + model->stop(); + pfmon_enabled = 0; + } + mutex_unlock(&pfmon_lock); +} + +static int op_bfin_create_files(struct super_block *sb, struct dentry *root) +{ + int i; + + for (i = 0; i < model->num_counters; ++i) { + struct dentry *dir; + char buf[3]; + printk(KERN_INFO "Oprofile: creating files... \n"); + + snprintf(buf, sizeof buf, "%d", i); + dir = oprofilefs_mkdir(sb, root, buf); + + oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); + oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); + oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); + /* + * We dont support per counter user/kernel selection, but + * we leave the entries because userspace expects them + */ + oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); + oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); + oprofilefs_create_ulong(sb, dir, "unit_mask", + &ctr[i].unit_mask); + } + + return 0; +} +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ +#ifdef CONFIG_HARDWARE_PM + unsigned int dspid; + + mutex_init(&pfmon_lock); + + dspid = bfin_read_DSPID(); + + printk(KERN_INFO "Oprofile got the cpu id is 0x%x. \n", dspid); + + switch (dspid) { + case BFIN_533_ID: + model = &op_model_bfin533; + model->num_counters = 2; + break; + case BFIN_537_ID: + model = &op_model_bfin533; + model->num_counters = 2; + break; + default: + return -ENODEV; + } + + ops->cpu_type = model->name; + ops->create_files = op_bfin_create_files; + ops->setup = op_bfin_setup; + ops->shutdown = op_bfin_shutdown; + ops->start = op_bfin_start; + ops->stop = op_bfin_stop; + + printk(KERN_INFO "oprofile: using %s performance monitoring.\n", + ops->cpu_type); + + return 0; +#else + return -1; +#endif +} + +void oprofile_arch_exit(void) +{ +} diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h new file mode 100644 index 0000000000..f88f446c81 --- /dev/null +++ b/arch/blackfin/oprofile/op_blackfin.h @@ -0,0 +1,98 @@ +/* + * File: arch/blackfin/oprofile/op_blackfin.h + * Based on: + * Author: Anton Blanchard + * + * Created: + * Description: + * + * Modified: + * Copyright (C) 2004 Anton Blanchard , IBM + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef OP_BLACKFIN_H +#define OP_BLACKFIN_H 1 + +#define OP_MAX_COUNTER 2 + +#include + +/* Per-counter configuration as set via oprofilefs. */ +struct op_counter_config { + unsigned long valid; + unsigned long enabled; + unsigned long event; + unsigned long count; + unsigned long kernel; + unsigned long user; + unsigned long unit_mask; +}; + +/* System-wide configuration as set via oprofilefs. */ +struct op_system_config { + unsigned long enable_kernel; + unsigned long enable_user; +}; + +/* Per-arch configuration */ +struct op_bfin533_model { + int (*reg_setup) (struct op_counter_config *); + int (*start) (struct op_counter_config *); + void (*stop) (void); + int num_counters; + char *name; +}; + +extern struct op_bfin533_model op_model_bfin533; + +static inline unsigned int ctr_read(void) +{ + unsigned int tmp; + + tmp = bfin_read_PFCTL(); + __builtin_bfin_csync(); + + return tmp; +} + +static inline void ctr_write(unsigned int val) +{ + bfin_write_PFCTL(val); + __builtin_bfin_csync(); +} + +static inline void count_read(unsigned int *count) +{ + count[0] = bfin_read_PFCNTR0(); + count[1] = bfin_read_PFCNTR1(); + __builtin_bfin_csync(); +} + +static inline void count_write(unsigned int *count) +{ + bfin_write_PFCNTR0(count[0]); + bfin_write_PFCNTR1(count[1]); + __builtin_bfin_csync(); +} + +extern int pm_overflow_handler(int irq, struct pt_regs *regs); + +#endif diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c new file mode 100644 index 0000000000..b7a20a006b --- /dev/null +++ b/arch/blackfin/oprofile/op_model_bf533.c @@ -0,0 +1,161 @@ +/* + * File: arch/blackfin/oprofile/op_model_bf533.c + * Based on: + * Author: Anton Blanchard + * + * Created: + * Description: + * + * Modified: + * Copyright (C) 2004 Anton Blanchard , IBM + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "op_blackfin.h" + +#define PM_ENABLE 0x01; +#define PM_CTL1_ENABLE 0x18 +#define PM_CTL0_ENABLE 0xC000 +#define COUNT_EDGE_ONLY 0x3000000 + +static int oprofile_running; + +static unsigned curr_pfctl, curr_count[2]; + +static int bfin533_reg_setup(struct op_counter_config *ctr) +{ + unsigned int pfctl = ctr_read(); + unsigned int count[2]; + + /* set Blackfin perf monitor regs with ctr */ + if (ctr[0].enabled) { + pfctl |= (PM_CTL0_ENABLE | ((char)ctr[0].event << 5)); + count[0] = 0xFFFFFFFF - ctr[0].count; + curr_count[0] = count[0]; + } + if (ctr[1].enabled) { + pfctl |= (PM_CTL1_ENABLE | ((char)ctr[1].event << 16)); + count[1] = 0xFFFFFFFF - ctr[1].count; + curr_count[1] = count[1]; + } + + pr_debug("ctr[0].enabled=%d,ctr[1].enabled=%d,ctr[0].event<<5=0x%x,ctr[1].event<<16=0x%x\n", ctr[0].enabled, ctr[1].enabled, ctr[0].event << 5, ctr[1].event << 16); + pfctl |= COUNT_EDGE_ONLY; + curr_pfctl = pfctl; + + pr_debug("write 0x%x to pfctl\n", pfctl); + ctr_write(pfctl); + count_write(count); + + return 0; +} + +static int bfin533_start(struct op_counter_config *ctr) +{ + unsigned int pfctl = ctr_read(); + + pfctl |= PM_ENABLE; + curr_pfctl = pfctl; + + ctr_write(pfctl); + + oprofile_running = 1; + pr_debug("start oprofile counter \n"); + + return 0; +} + +static void bfin533_stop(void) +{ + int pfctl; + + pfctl = ctr_read(); + pfctl &= ~PM_ENABLE; + /* freeze counters */ + ctr_write(pfctl); + + oprofile_running = 0; + pr_debug("stop oprofile counter \n"); +} + +static int get_kernel(void) +{ + int ipend, is_kernel; + + ipend = bfin_read_IPEND(); + + /* test bit 15 */ + is_kernel = ((ipend & 0x8000) != 0); + + return is_kernel; +} + +int pm_overflow_handler(int irq, struct pt_regs *regs) +{ + int is_kernel; + int i, cpu; + unsigned int pc, pfctl; + unsigned int count[2]; + + pr_debug("get interrupt in %s\n", __FUNCTION__); + if (oprofile_running == 0) { + pr_debug("error: entering interrupt when oprofile is stopped.\n\r"); + return -1; + } + + is_kernel = get_kernel(); + cpu = smp_processor_id(); + pc = regs->pc; + pfctl = ctr_read(); + + /* read the two event counter regs */ + count_read(count); + + /* if the counter overflows, add sample to oprofile buffer */ + for (i = 0; i < 2; ++i) { + if (oprofile_running) { + oprofile_add_sample(regs, i); + } + } + + /* reset the perfmon counter */ + ctr_write(curr_pfctl); + count_write(curr_count); + return 0; +} + +struct op_bfin533_model op_model_bfin533 = { + .reg_setup = bfin533_reg_setup, + .start = bfin533_start, + .stop = bfin533_stop, + .num_counters = 2, + .name = "blackfin/bf533" +}; diff --git a/arch/blackfin/oprofile/timer_int.c b/arch/blackfin/oprofile/timer_int.c new file mode 100644 index 0000000000..8fba16c846 --- /dev/null +++ b/arch/blackfin/oprofile/timer_int.c @@ -0,0 +1,74 @@ +/* + * File: arch/blackfin/oprofile/timer_int.c + * Based on: + * Author: Michael Kang + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include + +#include + +static void enable_sys_timer0() +{ +} +static void disable_sys_timer0() +{ +} + +static irqreturn_t sys_timer0_int_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + oprofile_add_sample(regs, 0); + return IRQ_HANDLED; +} + +static int sys_timer0_start(void) +{ + enable_sys_timer0(); + return request_irq(IVG11, sys_timer0_int_handler, 0, "sys_timer0", NULL); +} + +static void sys_timer0_stop(void) +{ + disable_sys_timer(); +} + +int __init sys_timer0_init(struct oprofile_operations *ops) +{ + extern int nmi_active; + + if (nmi_active <= 0) + return -ENODEV; + + ops->start = timer_start; + ops->stop = timer_stop; + ops->cpu_type = "timer"; + printk(KERN_INFO "oprofile: using NMI timer interrupt.\n"); + return 0; +} diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index f3d3d81eb7..74c64409dd 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -26,7 +26,7 @@ config BINFMT_ELF config BINFMT_ELF_FDPIC bool "Kernel support for FDPIC ELF binaries" default y - depends on FRV + depends on (FRV || BLACKFIN) help ELF FDPIC binaries are based on ELF, but allow the individual load segments of a binary to be located in memory independently of each diff --git a/include/asm-blackfin/Kbuild b/include/asm-blackfin/Kbuild new file mode 100644 index 0000000000..c68e1680da --- /dev/null +++ b/include/asm-blackfin/Kbuild @@ -0,0 +1 @@ +include include/asm-generic/Kbuild.asm diff --git a/include/asm-blackfin/a.out.h b/include/asm-blackfin/a.out.h new file mode 100644 index 0000000000..d37a6849bf --- /dev/null +++ b/include/asm-blackfin/a.out.h @@ -0,0 +1,25 @@ +#ifndef __BFIN_A_OUT_H__ +#define __BFIN_A_OUT_H__ + +struct exec { + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#ifdef __KERNEL__ + +#define STACK_TOP TASK_SIZE + +#endif + +#endif /* __BFIN_A_OUT_H__ */ diff --git a/include/asm-blackfin/atomic.h b/include/asm-blackfin/atomic.h new file mode 100644 index 0000000000..7cf5087186 --- /dev/null +++ b/include/asm-blackfin/atomic.h @@ -0,0 +1,144 @@ +#ifndef __ARCH_BLACKFIN_ATOMIC__ +#define __ARCH_BLACKFIN_ATOMIC__ + +#include /* local_irq_XXX() */ + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + * Generally we do not concern about SMP BFIN systems, so we don't have + * to deal with that. + * + * Tony Kou (tonyko@lineo.ca) Lineo Inc. 2001 + */ + +typedef struct { + int counter; +} atomic_t; +#define ATOMIC_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = i) + +static __inline__ void atomic_add(int i, atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter += i; + local_irq_restore(flags); +} + +static __inline__ void atomic_sub(int i, atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter -= i; + local_irq_restore(flags); + +} + +static inline int atomic_add_return(int i, atomic_t * v) +{ + int __temp = 0; + long flags; + + local_irq_save(flags); + v->counter += i; + __temp = v->counter; + local_irq_restore(flags); + + + return __temp; +} + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) +static inline int atomic_sub_return(int i, atomic_t * v) +{ + int __temp = 0; + long flags; + + local_irq_save(flags); + v->counter -= i; + __temp = v->counter; + local_irq_restore(flags); + + return __temp; +} + +static __inline__ void atomic_inc(volatile atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter++; + local_irq_restore(flags); +} + +#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +static __inline__ void atomic_dec(volatile atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter--; + local_irq_restore(flags); +} + +static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter &= ~mask; + local_irq_restore(flags); +} + +static __inline__ void atomic_set_mask(unsigned int mask, atomic_t * v) +{ + long flags; + + local_irq_save(flags); + v->counter |= mask; + local_irq_restore(flags); +} + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#define atomic_dec_return(v) atomic_sub_return(1,(v)) +#define atomic_inc_return(v) atomic_add_return(1,(v)) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) + +#include + +#endif /* __ARCH_BLACKFIN_ATOMIC __ */ diff --git a/include/asm-blackfin/auxvec.h b/include/asm-blackfin/auxvec.h new file mode 100644 index 0000000000..215506cd87 --- /dev/null +++ b/include/asm-blackfin/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMBFIN_AUXVEC_H +#define __ASMBFIN_AUXVEC_H + +#endif diff --git a/include/asm-blackfin/bf5xx_timers.h b/include/asm-blackfin/bf5xx_timers.h new file mode 100644 index 0000000000..86c770321b --- /dev/null +++ b/include/asm-blackfin/bf5xx_timers.h @@ -0,0 +1,209 @@ +/* + * include/asm/bf5xx_timers.h + * + * This file contains the major Data structures and constants + * used for General Purpose Timer Implementation in BF5xx + * + * Copyright (C) 2005 John DeHority + * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de) + * + */ + +#ifndef _BLACKFIN_TIMERS_H_ +#define _BLACKFIN_TIMERS_H_ + +#undef MAX_BLACKFIN_GPTIMERS +/* + * BF537: 8 timers: + */ +#if defined(CONFIG_BF537) +# define MAX_BLACKFIN_GPTIMERS 8 +# define TIMER0_GROUP_REG TIMER_ENABLE +#endif +/* + * BF561: 12 timers: + */ +#if defined(CONFIG_BF561) +# define MAX_BLACKFIN_GPTIMERS 12 +# define TIMER0_GROUP_REG TMRS8_ENABLE +# define TIMER8_GROUP_REG TMRS4_ENABLE +#endif +/* + * All others: 3 timers: + */ +#if !defined(MAX_BLACKFIN_GPTIMERS) +# define MAX_BLACKFIN_GPTIMERS 3 +# define TIMER0_GROUP_REG TIMER_ENABLE +#endif + +#define BLACKFIN_GPTIMER_IDMASK ((1UL << MAX_BLACKFIN_GPTIMERS) - 1) +#define BFIN_TIMER_OCTET(x) ((x) >> 3) + +/* used in masks for timer_enable() and timer_disable() */ +#define TIMER0bit 0x0001 /* 0001b */ +#define TIMER1bit 0x0002 /* 0010b */ +#define TIMER2bit 0x0004 /* 0100b */ + +#if (MAX_BLACKFIN_GPTIMERS > 3) +# define TIMER3bit 0x0008 +# define TIMER4bit 0x0010 +# define TIMER5bit 0x0020 +# define TIMER6bit 0x0040 +# define TIMER7bit 0x0080 +#endif + +#if (MAX_BLACKFIN_GPTIMERS > 8) +# define TIMER8bit 0x0100 +# define TIMER9bit 0x0200 +# define TIMER10bit 0x0400 +# define TIMER11bit 0x0800 +#endif + +#define TIMER0_id 0 +#define TIMER1_id 1 +#define TIMER2_id 2 + +#if (MAX_BLACKFIN_GPTIMERS > 3) +# define TIMER3_id 3 +# define TIMER4_id 4 +# define TIMER5_id 5 +# define TIMER6_id 6 +# define TIMER7_id 7 +#endif + +#if (MAX_BLACKFIN_GPTIMERS > 8) +# define TIMER8_id 8 +# define TIMER9_id 9 +# define TIMER10_id 10 +# define TIMER11_id 11 +#endif + +/* associated timers for ppi framesync: */ + +#if defined(CONFIG_BF561) +# define FS0_1_TIMER_ID TIMER8_id +# define FS0_2_TIMER_ID TIMER9_id +# define FS1_1_TIMER_ID TIMER10_id +# define FS1_2_TIMER_ID TIMER11_id +# define FS0_1_TIMER_BIT TIMER8bit +# define FS0_2_TIMER_BIT TIMER9bit +# define FS1_1_TIMER_BIT TIMER10bit +# define FS1_2_TIMER_BIT TIMER11bit +# undef FS1_TIMER_ID +# undef FS2_TIMER_ID +# undef FS1_TIMER_BIT +# undef FS2_TIMER_BIT +#else +# define FS1_TIMER_ID TIMER0_id +# define FS2_TIMER_ID TIMER1_id +# define FS1_TIMER_BIT TIMER0bit +# define FS2_TIMER_BIT TIMER1bit +#endif + +/* +** Timer Configuration Register Bits +*/ +#define TIMER_ERR 0xC000 +#define TIMER_ERR_OVFL 0x4000 +#define TIMER_ERR_PROG_PER 0x8000 +#define TIMER_ERR_PROG_PW 0xC000 +#define TIMER_EMU_RUN 0x0200 +#define TIMER_TOGGLE_HI 0x0100 +#define TIMER_CLK_SEL 0x0080 +#define TIMER_OUT_DIS 0x0040 +#define TIMER_TIN_SEL 0x0020 +#define TIMER_IRQ_ENA 0x0010 +#define TIMER_PERIOD_CNT 0x0008 +#define TIMER_PULSE_HI 0x0004 +#define TIMER_MODE 0x0003 +#define TIMER_MODE_PWM 0x0001 +#define TIMER_MODE_WDTH 0x0002 +#define TIMER_MODE_EXT_CLK 0x0003 + +/* +** Timer Status Register Bits +*/ +#define TIMER_STATUS_TIMIL0 0x0001 +#define TIMER_STATUS_TIMIL1 0x0002 +#define TIMER_STATUS_TIMIL2 0x0004 +#if (MAX_BLACKFIN_GPTIMERS > 3) +# define TIMER_STATUS_TIMIL3 0x00000008 +# define TIMER_STATUS_TIMIL4 0x00010000 +# define TIMER_STATUS_TIMIL5 0x00020000 +# define TIMER_STATUS_TIMIL6 0x00040000 +# define TIMER_STATUS_TIMIL7 0x00080000 +# if (MAX_BLACKFIN_GPTIMERS > 8) +# define TIMER_STATUS_TIMIL8 0x0001 +# define TIMER_STATUS_TIMIL9 0x0002 +# define TIMER_STATUS_TIMIL10 0x0004 +# define TIMER_STATUS_TIMIL11 0x0008 +# endif +# define TIMER_STATUS_INTR 0x000F000F +#else +# define TIMER_STATUS_INTR 0x0007 /* any timer interrupt */ +#endif + +#define TIMER_STATUS_TOVF0 0x0010 /* timer 0 overflow error */ +#define TIMER_STATUS_TOVF1 0x0020 +#define TIMER_STATUS_TOVF2 0x0040 +#if (MAX_BLACKFIN_GPTIMERS > 3) +# define TIMER_STATUS_TOVF3 0x00000080 +# define TIMER_STATUS_TOVF4 0x00100000 +# define TIMER_STATUS_TOVF5 0x00200000 +# define TIMER_STATUS_TOVF6 0x00400000 +# define TIMER_STATUS_TOVF7 0x00800000 +# if (MAX_BLACKFIN_GPTIMERS > 8) +# define TIMER_STATUS_TOVF8 0x0010 +# define TIMER_STATUS_TOVF9 0x0020 +# define TIMER_STATUS_TOVF10 0x0040 +# define TIMER_STATUS_TOVF11 0x0080 +# endif +# define TIMER_STATUS_OFLOW 0x00F000F0 +#else +# define TIMER_STATUS_OFLOW 0x0070 /* any timer overflow */ +#endif + +/* +** Timer Slave Enable Status : write 1 to clear +*/ +#define TIMER_STATUS_TRUN0 0x1000 +#define TIMER_STATUS_TRUN1 0x2000 +#define TIMER_STATUS_TRUN2 0x4000 +#if (MAX_BLACKFIN_GPTIMERS > 3) +# define TIMER_STATUS_TRUN3 0x00008000 +# define TIMER_STATUS_TRUN4 0x10000000 +# define TIMER_STATUS_TRUN5 0x20000000 +# define TIMER_STATUS_TRUN6 0x40000000 +# define TIMER_STATUS_TRUN7 0x80000000 +# define TIMER_STATUS_TRUN 0xF000F000 +# if (MAX_BLACKFIN_GPTIMERS > 8) +# define TIMER_STATUS_TRUN8 0x1000 +# define TIMER_STATUS_TRUN9 0x2000 +# define TIMER_STATUS_TRUN10 0x4000 +# define TIMER_STATUS_TRUN11 0x8000 +# endif +#else +# define TIMER_STATUS_TRUN 0x7000 +#endif + +/******************************************************************************* +* GP_TIMER API's +*******************************************************************************/ + +void set_gptimer_pwidth (int timer_id, int width); +int get_gptimer_pwidth (int timer_id); +void set_gptimer_period (int timer_id, int period); +int get_gptimer_period (int timer_id); +int get_gptimer_count (int timer_id); +short get_gptimer_intr (int timer_id); +void set_gptimer_config (int timer_id, short config); +short get_gptimer_config (int timer_id); +void set_gptimer_pulse_hi (int timer_id); +void clear_gptimer_pulse_hi(int timer_id); +void enable_gptimers (short mask); +void disable_gptimers (short mask); +short get_enabled_timers (void); +int get_gptimer_status (int octet); +void set_gptimer_status (int octet, int value); + +#endif diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h new file mode 100644 index 0000000000..e37f81609f --- /dev/null +++ b/include/asm-blackfin/bfin-global.h @@ -0,0 +1,120 @@ +/* + * File: include/asm-blackfin/bfin-global.h + * Based on: + * Author: * + * Created: + * Description: Global extern defines for blackfin + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BFIN_GLOBAL_H_ +#define _BFIN_GLOBAL_H_ + +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include +#include + +#if defined(CONFIG_DMA_UNCACHED_2M) +# define DMA_UNCACHED_REGION (2 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_1M) +# define DMA_UNCACHED_REGION (1024 * 1024) +#else +# define DMA_UNCACHED_REGION (0) +#endif + +extern unsigned long get_cclk(void); +extern unsigned long get_sclk(void); + +extern void dump_thread(struct pt_regs *regs, struct user *dump); +extern void dump_bfin_regs(struct pt_regs *fp, void *retaddr); +extern void dump_bfin_trace_buffer(void); + +extern int init_arch_irq(void); +extern void bfin_reset(void); +extern void _cplb_hdr(void); +/* Blackfin cache functions */ +extern void bfin_icache_init(void); +extern void bfin_dcache_init(void); +extern int read_iloc(void); +extern int bfin_console_init(void); +extern asmlinkage void lower_to_irq14(void); +extern void init_dma(void); +extern void program_IAR(void); +extern void evt14_softirq(void); +extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); +extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type); + +extern void *l1_data_A_sram_alloc(size_t); +extern void *l1_data_B_sram_alloc(size_t); +extern void *l1_inst_sram_alloc(size_t); +extern void *l1_data_sram_alloc(size_t); +extern void *l1_data_sram_zalloc(size_t); +extern int l1_data_A_sram_free(const void*); +extern int l1_data_B_sram_free(const void*); +extern int l1_inst_sram_free(const void*); +extern int l1_data_sram_free(const void*); +extern int sram_free(const void*); + +#define L1_INST_SRAM 0x00000001 +#define L1_DATA_A_SRAM 0x00000002 +#define L1_DATA_B_SRAM 0x00000004 +#define L1_DATA_SRAM 0x00000006 +extern void *sram_alloc_with_lsl(size_t, unsigned long); +extern int sram_free_with_lsl(const void*); + +extern void led_on(int); +extern void led_off(int); +extern void led_toggle(int); +extern void led_disp_num(int); +extern void led_toggle_num(int); +extern void init_leds(void); + +extern char *bfin_board_name __attribute__ ((weak)); +extern unsigned long wall_jiffies; +extern unsigned long ipdt_table[]; +extern unsigned long dpdt_table[]; +extern unsigned long icplb_table[]; +extern unsigned long dcplb_table[]; + +extern unsigned long ipdt_swapcount_table[]; +extern unsigned long dpdt_swapcount_table[]; + +extern unsigned long table_start, table_end; + +extern struct file_operations dpmc_fops; +extern char _start; +extern unsigned long _ramstart, _ramend, _rambase; +extern unsigned long memory_start, memory_end, physical_mem_end; +extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], + _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[]; + +#ifdef CONFIG_MTD_UCLINUX +extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size; +#endif + +#endif + +#endif /* _BLACKFIN_H_ */ diff --git a/include/asm-blackfin/bfin5xx_spi.h b/include/asm-blackfin/bfin5xx_spi.h new file mode 100644 index 0000000000..95c1c952e7 --- /dev/null +++ b/include/asm-blackfin/bfin5xx_spi.h @@ -0,0 +1,170 @@ +/************************************************************ +* +* Copyright (C) 2004, Analog Devices. All Rights Reserved +* +* FILE bfin5xx_spi.h +* PROGRAMMER(S): Luke Yang (Analog Devices Inc.) +* +* +* DATE OF CREATION: March. 10th 2006 +* +* SYNOPSIS: +* +* DESCRIPTION: header file for SPI controller driver for Blackfin5xx. +************************************************************** + +* MODIFICATION HISTORY: +* March 10, 2006 bfin5xx_spi.h Created. (Luke Yang) + +************************************************************/ + +#ifndef _SPI_CHANNEL_H_ +#define _SPI_CHANNEL_H_ + +#define SPI0_REGBASE 0xffc00500 + +#define SPI_READ 0 +#define SPI_WRITE 1 + +#define SPI_CTRL_OFF 0x0 +#define SPI_FLAG_OFF 0x4 +#define SPI_STAT_OFF 0x8 +#define SPI_TXBUFF_OFF 0xc +#define SPI_RXBUFF_OFF 0x10 +#define SPI_BAUD_OFF 0x14 +#define SPI_SHAW_OFF 0x18 + +#define CMD_SPI_OUT_ENABLE 1 +#define CMD_SPI_SET_BAUDRATE 2 +#define CMD_SPI_SET_POLAR 3 +#define CMD_SPI_SET_PHASE 4 +#define CMD_SPI_SET_MASTER 5 +#define CMD_SPI_SET_SENDOPT 6 +#define CMD_SPI_SET_RECVOPT 7 +#define CMD_SPI_SET_ORDER 8 +#define CMD_SPI_SET_LENGTH16 9 +#define CMD_SPI_GET_STAT 11 +#define CMD_SPI_GET_CFG 12 +#define CMD_SPI_SET_CSAVAIL 13 +#define CMD_SPI_SET_CSHIGH 14 /* CS unavail */ +#define CMD_SPI_SET_CSLOW 15 /* CS avail */ +#define CMD_SPI_MISO_ENABLE 16 +#define CMD_SPI_SET_CSENABLE 17 +#define CMD_SPI_SET_CSDISABLE 18 + +#define CMD_SPI_SET_TRIGGER_MODE 19 +#define CMD_SPI_SET_TRIGGER_SENSE 20 +#define CMD_SPI_SET_TRIGGER_EDGE 21 +#define CMD_SPI_SET_TRIGGER_LEVEL 22 + +#define CMD_SPI_SET_TIME_SPS 23 +#define CMD_SPI_SET_TIME_SAMPLES 24 +#define CMD_SPI_GET_SYSTEMCLOCK 25 + +#define CMD_SPI_SET_WRITECONTINUOUS 26 +#define CMD_SPI_SET_SKFS 27 + +#define CMD_SPI_GET_ALLCONFIG 32 /* For debug */ + +#define SPI_DEFAULT_BARD 0x0100 + +#define SPI0_IRQ_NUM IRQ_SPI +#define SPI_ERR_TRIG -1 + +#define BIT_CTL_ENABLE 0x4000 +#define BIT_CTL_OPENDRAIN 0x2000 +#define BIT_CTL_MASTER 0x1000 +#define BIT_CTL_POLAR 0x0800 +#define BIT_CTL_PHASE 0x0400 +#define BIT_CTL_BITORDER 0x0200 +#define BIT_CTL_WORDSIZE 0x0100 +#define BIT_CTL_MISOENABLE 0x0020 +#define BIT_CTL_RXMOD 0x0000 +#define BIT_CTL_TXMOD 0x0001 +#define BIT_CTL_TIMOD_DMA_TX 0x0003 +#define BIT_CTL_TIMOD_DMA_RX 0x0002 +#define BIT_CTL_SENDOPT 0x0004 +#define BIT_CTL_TIMOD 0x0003 + +#define BIT_STAT_SPIF 0x0001 +#define BIT_STAT_MODF 0x0002 +#define BIT_STAT_TXE 0x0004 +#define BIT_STAT_TXS 0x0008 +#define BIT_STAT_RBSY 0x0010 +#define BIT_STAT_RXS 0x0020 +#define BIT_STAT_TXCOL 0x0040 +#define BIT_STAT_CLR 0xFFFF + +#define BIT_STU_SENDOVER 0x0001 +#define BIT_STU_RECVFULL 0x0020 + +#define CFG_SPI_ENABLE 1 +#define CFG_SPI_DISABLE 0 + +#define CFG_SPI_OUTENABLE 1 +#define CFG_SPI_OUTDISABLE 0 + +#define CFG_SPI_ACTLOW 1 +#define CFG_SPI_ACTHIGH 0 + +#define CFG_SPI_PHASESTART 1 +#define CFG_SPI_PHASEMID 0 + +#define CFG_SPI_MASTER 1 +#define CFG_SPI_SLAVE 0 + +#define CFG_SPI_SENELAST 0 +#define CFG_SPI_SENDZERO 1 + +#define CFG_SPI_RCVFLUSH 1 +#define CFG_SPI_RCVDISCARD 0 + +#define CFG_SPI_LSBFIRST 1 +#define CFG_SPI_MSBFIRST 0 + +#define CFG_SPI_WORDSIZE16 1 +#define CFG_SPI_WORDSIZE8 0 + +#define CFG_SPI_MISOENABLE 1 +#define CFG_SPI_MISODISABLE 0 + +#define CFG_SPI_READ 0x00 +#define CFG_SPI_WRITE 0x01 +#define CFG_SPI_DMAREAD 0x02 +#define CFG_SPI_DMAWRITE 0x03 + +#define CFG_SPI_CSCLEARALL 0 +#define CFG_SPI_CHIPSEL1 1 +#define CFG_SPI_CHIPSEL2 2 +#define CFG_SPI_CHIPSEL3 3 +#define CFG_SPI_CHIPSEL4 4 +#define CFG_SPI_CHIPSEL5 5 +#define CFG_SPI_CHIPSEL6 6 +#define CFG_SPI_CHIPSEL7 7 + +#define CFG_SPI_CS1VALUE 1 +#define CFG_SPI_CS2VALUE 2 +#define CFG_SPI_CS3VALUE 3 +#define CFG_SPI_CS4VALUE 4 +#define CFG_SPI_CS5VALUE 5 +#define CFG_SPI_CS6VALUE 6 +#define CFG_SPI_CS7VALUE 7 + +/* device.platform_data for SSP controller devices */ +struct bfin5xx_spi_master { + u16 num_chipselect; + u8 enable_dma; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct bfin5xx_spi_chip { + u16 ctl_reg; + u8 enable_dma; + u8 bits_per_word; + u8 cs_change_per_word; + u8 cs_chg_udelay; +}; + +#endif /* _SPI_CHANNEL_H_ */ diff --git a/include/asm-blackfin/bfin_simple_timer.h b/include/asm-blackfin/bfin_simple_timer.h new file mode 100644 index 0000000000..fccbb59546 --- /dev/null +++ b/include/asm-blackfin/bfin_simple_timer.h @@ -0,0 +1,13 @@ +#ifndef _bfin_simple_timer_h_ +#define _bfin_simple_timer_h_ + +#include + +#define BFIN_SIMPLE_TIMER_IOCTL_MAGIC 't' + +#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 2) +#define BFIN_SIMPLE_TIMER_START _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 6) +#define BFIN_SIMPLE_TIMER_STOP _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 8) +#define BFIN_SIMPLE_TIMER_READ _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10) + +#endif diff --git a/include/asm-blackfin/bfin_sport.h b/include/asm-blackfin/bfin_sport.h new file mode 100644 index 0000000000..c76ed8def3 --- /dev/null +++ b/include/asm-blackfin/bfin_sport.h @@ -0,0 +1,175 @@ +/* + * File: include/asm-blackfin/bfin_sport.h + * Based on: + * Author: Roy Huang (roy.huang@analog.com) + * + * Created: Thu Aug. 24 2006 + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __BFIN_SPORT_H__ +#define __BFIN_SPORT_H__ + +#define SPORT_MAJOR 237 +#define SPORT_NR_DEVS 2 + +/* Sport mode: it can be set to TDM, i2s or others */ +#define NORM_MODE 0x0 +#define TDM_MODE 0x1 +#define I2S_MODE 0x2 + +/* Data format, normal, a-law or u-law */ +#define NORM_FORMAT 0x0 +#define ALAW_FORMAT 0x2 +#define ULAW_FORMAT 0x3 +struct sport_register; + +/* Function driver which use sport must initialize the structure */ +struct sport_config { + /*TDM (multichannels), I2S or other mode */ + unsigned int mode:3; + + /* if TDM mode is selected, channels must be set */ + int channels; /* Must be in 8 units */ + unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ + + /* I2S mode */ + unsigned int right_first:1; /* Right stereo channel first */ + + /* In mormal mode, the following item need to be set */ + unsigned int lsb_first:1; /* order of transmit or receive data */ + unsigned int fsync:1; /* Frame sync required */ + unsigned int data_indep:1; /* data independent frame sync generated */ + unsigned int act_low:1; /* Active low TFS */ + unsigned int late_fsync:1; /* Late frame sync */ + unsigned int tckfe:1; + unsigned int sec_en:1; /* Secondary side enabled */ + + /* Choose clock source */ + unsigned int int_clk:1; /* Internal or external clock */ + + /* If external clock is used, the following fields are ignored */ + int serial_clk; + int fsync_clk; + + unsigned int data_format:2; /*Normal, u-law or a-law */ + + int word_len; /* How length of the word in bits, 3-32 bits */ + int dma_enabled; +}; + +struct sport_register { + unsigned short tcr1; + unsigned short reserved0; + unsigned short tcr2; + unsigned short reserved1; + unsigned short tclkdiv; + unsigned short reserved2; + unsigned short tfsdiv; + unsigned short reserved3; + unsigned long tx; + unsigned long reserved_l0; + unsigned long rx; + unsigned long reserved_l1; + unsigned short rcr1; + unsigned short reserved4; + unsigned short rcr2; + unsigned short reserved5; + unsigned short rclkdiv; + unsigned short reserved6; + unsigned short rfsdiv; + unsigned short reserved7; + unsigned short stat; + unsigned short reserved8; + unsigned short chnl; + unsigned short reserved9; + unsigned short mcmc1; + unsigned short reserved10; + unsigned short mcmc2; + unsigned short reserved11; + unsigned long mtcs0; + unsigned long mtcs1; + unsigned long mtcs2; + unsigned long mtcs3; + unsigned long mrcs0; + unsigned long mrcs1; + unsigned long mrcs2; + unsigned long mrcs3; +}; + +#define SPORT_IOC_MAGIC 'P' +#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) + +/* Test purpose */ +#define ENABLE_AD73311 _IOWR('P', 0x02, int) + +struct sport_dev { + struct cdev cdev; /* Char device structure */ + + int sport_num; + + int dma_rx_chan; + int dma_tx_chan; + + int rx_irq; + unsigned char *rx_buf; /* Buffer store the received data */ + int rx_len; /* How many bytes will be received */ + int rx_received; /* How many bytes has been received */ + + int tx_irq; + const unsigned char *tx_buf; + int tx_len; + int tx_sent; + + int sport_err_irq; + + struct mutex mutex; /* mutual exclusion semaphore */ + struct task_struct *task; + + wait_queue_head_t waitq; + int wait_con; + struct sport_register *regs; + struct sport_config config; +}; + +#define SPORT_TCR1 0 +#define SPORT_TCR2 1 +#define SPORT_TCLKDIV 2 +#define SPORT_TFSDIV 3 +#define SPORT_RCR1 8 +#define SPORT_RCR2 9 +#define SPORT_RCLKDIV 10 +#define SPORT_RFSDIV 11 +#define SPORT_CHANNEL 13 +#define SPORT_MCMC1 14 +#define SPORT_MCMC2 15 +#define SPORT_MTCS0 16 +#define SPORT_MTCS1 17 +#define SPORT_MTCS2 18 +#define SPORT_MTCS3 19 +#define SPORT_MRCS0 20 +#define SPORT_MRCS1 21 +#define SPORT_MRCS2 22 +#define SPORT_MRCS3 23 + +#endif /*__BFIN_SPORT_H__*/ diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h new file mode 100644 index 0000000000..27c2d0e48e --- /dev/null +++ b/include/asm-blackfin/bitops.h @@ -0,0 +1,213 @@ +#ifndef _BLACKFIN_BITOPS_H +#define _BLACKFIN_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#include +#include /* swab32 */ +#include /* save_flags */ + +#ifdef __KERNEL__ + +#include +#include +#include +#include + +static __inline__ void set_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a |= mask; + local_irq_restore(flags); +} + +static __inline__ void __set_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a |= mask; +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static __inline__ void clear_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + unsigned long flags; + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a &= ~mask; + local_irq_restore(flags); +} + +static __inline__ void __clear_bit(int nr, volatile unsigned long *addr) +{ + int *a = (int *)addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a &= ~mask; +} + +static __inline__ void change_bit(int nr, volatile unsigned long *addr) +{ + int mask, flags; + unsigned long *ADDR = (unsigned long *)addr; + + ADDR += nr >> 5; + mask = 1 << (nr & 31); + local_irq_save(flags); + *ADDR ^= mask; + local_irq_restore(flags); +} + +static __inline__ void __change_bit(int nr, volatile unsigned long *addr) +{ + int mask; + unsigned long *ADDR = (unsigned long *)addr; + + ADDR += nr >> 5; + mask = 1 << (nr & 31); + *ADDR ^= mask; +} + +static __inline__ int test_and_set_bit(int nr, void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a |= mask; + local_irq_restore(flags); + + return retval; +} + +static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a |= mask; + return retval; +} + +static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + local_irq_restore(flags); + + return retval; +} + +static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a &= ~mask; + return retval; +} + +static __inline__ int test_and_change_bit(int nr, volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a ^= mask; + local_irq_restore(flags); + return retval; +} + +static __inline__ int __test_and_change_bit(int nr, + volatile unsigned long *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *)addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a ^= mask; + return retval; +} + +/* + * This routine doesn't need to be atomic. + */ +static __inline__ int __constant_test_bit(int nr, const void *addr) +{ + return ((1UL << (nr & 31)) & + (((const volatile unsigned int *)addr)[nr >> 5])) != 0; +} + +static __inline__ int __test_bit(int nr, const void *addr) +{ + int *a = (int *)addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + return ((mask & *a) != 0); +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + __constant_test_bit((nr),(addr)) : \ + __test_bit((nr),(addr))) + +#include +#include + +#include +#include + +#include + +#endif /* __KERNEL__ */ + +#include +#include + +#endif /* _BLACKFIN_BITOPS_H */ diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h new file mode 100644 index 0000000000..14e58de739 --- /dev/null +++ b/include/asm-blackfin/blackfin.h @@ -0,0 +1,81 @@ +/* + * Common header file for blackfin family of processors. + * + */ + +#ifndef _BLACKFIN_H_ +#define _BLACKFIN_H_ + +#include +#include +#include + +#ifndef __ASSEMBLY__ + +/* SSYNC implementation for C file */ +#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244) +static inline void SSYNC (void) +{ + int _tmp; + __asm__ __volatile__ ("cli %0;\n\t" + "nop;nop;\n\t" + "ssync;\n\t" + "sti %0;\n\t" + :"=d"(_tmp):); +} +#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) +static inline void SSYNC (void) +{ + int _tmp; + __asm__ __volatile__ ("cli %0;\n\t" + "ssync;\n\t" + "sti %0;\n\t" + :"=d"(_tmp):); +} +#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244) +static inline void SSYNC (void) +{ + __builtin_bfin_ssync(); +} +#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) +static inline void SSYNC (void) +{ + __asm__ __volatile__ ("ssync;\n\t"); +} +#endif + +/* CSYNC implementation for C file */ +#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244) +static inline void CSYNC (void) +{ + int _tmp; + __asm__ __volatile__ ("cli %0;\n\t" + "nop;nop;\n\t" + "csync;\n\t" + "sti %0;\n\t" + :"=d"(_tmp):); +} +#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) +static inline void CSYNC (void) +{ + int _tmp; + __asm__ __volatile__ ("cli %0;\n\t" + "csync;\n\t" + "sti %0;\n\t" + :"=d"(_tmp):); +} +#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244) +static inline void CSYNC (void) +{ + __builtin_bfin_csync(); +} +#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244) +static inline void CSYNC (void) +{ + __asm__ __volatile__ ("csync;\n\t"); +} +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* _BLACKFIN_H_ */ diff --git a/include/asm-blackfin/bug.h b/include/asm-blackfin/bug.h new file mode 100644 index 0000000000..41e53b29f1 --- /dev/null +++ b/include/asm-blackfin/bug.h @@ -0,0 +1,4 @@ +#ifndef _BLACKFIN_BUG_H +#define _BLACKFIN_BUG_H +#include +#endif diff --git a/include/asm-blackfin/bugs.h b/include/asm-blackfin/bugs.h new file mode 100644 index 0000000000..9093c9c1fb --- /dev/null +++ b/include/asm-blackfin/bugs.h @@ -0,0 +1,16 @@ +/* + * include/asm-blackfin/bugs.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +static void check_bugs(void) +{ +} diff --git a/include/asm-blackfin/byteorder.h b/include/asm-blackfin/byteorder.h new file mode 100644 index 0000000000..6a673d42da --- /dev/null +++ b/include/asm-blackfin/byteorder.h @@ -0,0 +1,48 @@ +#ifndef _BLACKFIN_BYTEORDER_H +#define _BLACKFIN_BYTEORDER_H + +#include +#include + +#ifdef __GNUC__ + +static __inline__ __attribute_const__ __u32 ___arch__swahb32(__u32 xx) +{ + __u32 tmp; + __asm__("%1 = %0 >> 8 (V);\n\t" + "%0 = %0 << 8 (V);\n\t" + "%0 = %0 | %1;\n\t" + : "+d"(xx), "=&d"(tmp)); + return xx; +} + +static __inline__ __attribute_const__ __u32 ___arch__swahw32(__u32 xx) +{ + __u32 rv; + __asm__("%0 = PACK(%1.L, %1.H);\n\t": "=d"(rv): "d"(xx)); + return rv; +} + +#define __arch__swahb32(x) ___arch__swahb32(x) +#define __arch__swahw32(x) ___arch__swahw32(x) +#define __arch__swab32(x) ___arch__swahb32(___arch__swahw32(x)) + +static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 xx) +{ + __u32 xw = xx; + __asm__("%0 <<= 8;\n %0.L = %0.L + %0.H (NS);\n": "+d"(xw)); + return (__u16)xw; +} + +#define __arch__swab16(x) ___arch__swab16(x) + +#endif + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#include + +#endif /* _BLACKFIN_BYTEORDER_H */ diff --git a/include/asm-blackfin/cache.h b/include/asm-blackfin/cache.h new file mode 100644 index 0000000000..023d72133b --- /dev/null +++ b/include/asm-blackfin/cache.h @@ -0,0 +1,29 @@ +/* + * include/asm-blackfin/cache.h + */ +#ifndef __ARCH_BLACKFIN_CACHE_H +#define __ARCH_BLACKFIN_CACHE_H + +/* + * Bytes per L1 cache line + * Blackfin loads 32 bytes for cache + */ +#define L1_CACHE_SHIFT 5 +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +/* + * Put cacheline_aliged data to L1 data memory + */ +#ifdef CONFIG_CACHELINE_ALIGNED_L1 +#define __cacheline_aligned \ + __attribute__((__aligned__(L1_CACHE_BYTES), \ + __section__(".data_l1.cacheline_aligned"))) +#endif + +/* + * largest L1 which this arch supports + */ +#define L1_CACHE_SHIFT_MAX 5 + +#endif diff --git a/include/asm-blackfin/cacheflush.h b/include/asm-blackfin/cacheflush.h new file mode 100644 index 0000000000..e5e000de3c --- /dev/null +++ b/include/asm-blackfin/cacheflush.h @@ -0,0 +1,90 @@ +/* + * File: include/asm-blackfin/cacheflush.h + * Based on: include/asm-m68knommu/cacheflush.h + * Author: LG Soft India + * Copyright (C) 2004 Analog Devices Inc. + * Created: Tue Sep 21 2004 + * Description: Blackfin low-level cache routines adapted from the i386 + * and PPC versions by Greg Ungerer (gerg@snapgear.com) + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BLACKFIN_CACHEFLUSH_H +#define _BLACKFIN_CACHEFLUSH_H + +#include + +extern void blackfin_icache_dcache_flush_range(unsigned int, unsigned int); +extern void blackfin_icache_flush_range(unsigned int, unsigned int); +extern void blackfin_dcache_flush_range(unsigned int, unsigned int); +extern void blackfin_dcache_invalidate_range(unsigned int, unsigned int); +extern void blackfin_dflush_page(void *); + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +static inline void flush_icache_range(unsigned start, unsigned end) +{ +#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_CACHE) + +# if defined(CONFIG_BLKFIN_WT) + blackfin_icache_flush_range((start), (end)); +# else + blackfin_icache_dcache_flush_range((start), (end)); +# endif + +#else + +# if defined(CONFIG_BLKFIN_CACHE) + blackfin_icache_flush_range((start), (end)); +# endif +# if defined(CONFIG_BLKFIN_DCACHE) + blackfin_dcache_flush_range((start), (end)); +# endif + +#endif +} + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { memcpy(dst, src, len); \ + flush_icache_range ((unsigned) (dst), (unsigned) (dst) + (len)); \ +} while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len) + +#if defined(CONFIG_BLKFIN_DCACHE) +# define invalidate_dcache_range(start,end) blackfin_dcache_invalidate_range((start), (end)) +#else +# define invalidate_dcache_range(start,end) do { } while (0) +#endif +#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_WB) +# define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end)) +# define flush_dcache_page(page) blackfin_dflush_page(page_address(page)) +#else +# define flush_dcache_range(start,end) do { } while (0) +# define flush_dcache_page(page) do { } while (0) +#endif + +#endif /* _BLACKFIN_CACHEFLUSH_H */ diff --git a/include/asm-blackfin/checksum.h b/include/asm-blackfin/checksum.h new file mode 100644 index 0000000000..2638f2586d --- /dev/null +++ b/include/asm-blackfin/checksum.h @@ -0,0 +1,101 @@ +#ifndef _BFIN_CHECKSUM_H +#define _BFIN_CHECKSUM_H + +/* + * MODIFIED FOR BFIN April 30, 2001 akbar.hussain@lineo.com + * + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst, + int len, int sum); + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern unsigned int csum_partial_copy_from_user(const unsigned char *src, + unsigned char *dst, int len, + int sum, int *csum_err); + +#define csum_partial_copy_nocheck(src, dst, len, sum) \ + csum_partial_copy((src), (dst), (len), (sum)) + +unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl); + +/* + * Fold a partial checksum + */ + +static inline unsigned int csum_fold(unsigned int sum) +{ + while (sum >> 16) + sum = (sum & 0xffff) + (sum >> 16); + return ((~(sum << 16)) >> 16); +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ + +static inline unsigned int +csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len, + unsigned short proto, unsigned int sum) +{ + + __asm__ ("%0 = %0 + %1;\n\t" + "CC = AC0;\n\t" + "if !CC jump 4;\n\t" + "%0 = %0 + %4;\n\t" + "%0 = %0 + %2;\n\t" + "CC = AC0;\n\t" + "if !CC jump 4;\n\t" + "%0 = %0 + %4;\n\t" + "%0 = %0 + %3;\n\t" + "CC = AC0;\n\t" + "if !CC jump 4;\n\t" + "%0 = %0 + %4;\n\t" + "NOP;\n\t" + : "=d" (sum) + : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)); + + return (sum); +} + +static inline unsigned short int +csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len, + unsigned short proto, unsigned int sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +extern unsigned short ip_compute_csum(const unsigned char *buff, int len); + +#endif /* _BFIN_CHECKSUM_H */ diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h new file mode 100644 index 0000000000..e0dd56bfa4 --- /dev/null +++ b/include/asm-blackfin/cplb.h @@ -0,0 +1,51 @@ +/************************************************************************ + * + * cplb.h + * + * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. + * + ************************************************************************/ + +/* Defines necessary for cplb initialisation routines. */ + +#ifndef _CPLB_H +#define _CPLB_H + +# include + +#define CPLB_ENABLE_ICACHE_P 0 +#define CPLB_ENABLE_DCACHE_P 1 +#define CPLB_ENABLE_DCACHE2_P 2 +#define CPLB_ENABLE_CPLBS_P 3 /* Deprecated! */ +#define CPLB_ENABLE_ICPLBS_P 4 +#define CPLB_ENABLE_DCPLBS_P 5 + +#define CPLB_ENABLE_ICACHE (1< +#include + +#define INITIAL_T 0x1 +#define SWITCH_T 0x2 +#define I_CPLB 0x4 +#define D_CPLB 0x8 + +#define IN_KERNEL 1 + +enum +{ZERO_P, L1I_MEM, L1D_MEM, SDRAM_KERN , SDRAM_RAM_MTD, SDRAM_DMAZ, RES_MEM, ASYNC_MEM, L2_MEM}; + +struct cplb_desc { + u32 start; /* start address */ + u32 end; /* end address */ + u32 psize; /* prefered size if any otherwise 1MB or 4MB*/ + u16 attr;/* attributes */ + u16 i_conf;/* I-CPLB DATA */ + u16 d_conf;/* D-CPLB DATA */ + u16 valid;/* valid */ + const s8 name[30];/* name */ +}; + +struct cplb_tab { + u_long *tab; + u16 pos; + u16 size; +}; + +u_long icplb_table[MAX_CPLBS+1]; +u_long dcplb_table[MAX_CPLBS+1]; + +/* Till here we are discussing about the static memory management model. + * However, the operating envoronments commonly define more CPLB + * descriptors to cover the entire addressable memory than will fit into + * the available on-chip 16 CPLB MMRs. When this happens, the below table + * will be used which will hold all the potentially required CPLB descriptors + * + * This is how Page descriptor Table is implemented in uClinux/Blackfin. + */ + +#ifdef CONFIG_CPLB_SWITCH_TAB_L1 +u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data)); +u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data)); + +#ifdef CONFIG_CPLB_INFO +u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data)); +u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data)); +#endif /* CONFIG_CPLB_INFO */ + +#else + +u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]; +u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]; + +#ifdef CONFIG_CPLB_INFO +u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]; +u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]; +#endif /* CONFIG_CPLB_INFO */ + +#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/ + +struct s_cplb { + struct cplb_tab init_i; + struct cplb_tab init_d; + struct cplb_tab switch_i; + struct cplb_tab switch_d; +}; + +#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE) +static struct cplb_desc cplb_data[] = { + { + .start = 0, + .end = SIZE_4K, + .psize = SIZE_4K, + .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_OOPS, + .d_conf = SDRAM_OOPS, +#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO) + .valid = 1, +#else + .valid = 0, +#endif + .name = "ZERO Pointer Saveguard", + }, + { + .start = L1_CODE_START, + .end = L1_CODE_START + L1_CODE_LENGTH, + .psize = SIZE_4M, + .attr = INITIAL_T | SWITCH_T | I_CPLB, + .i_conf = L1_IMEMORY, + .d_conf = 0, + .valid = 1, + .name = "L1 I-Memory", + }, + { + .start = L1_DATA_A_START, + .end = L1_DATA_B_START + L1_DATA_B_LENGTH, + .psize = SIZE_4M, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .i_conf = 0, + .d_conf = L1_DMEMORY, +#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0)) + .valid = 1, +#else + .valid = 0, +#endif + .name = "L1 D-Memory", + }, + { + .start = 0, + .end = 0, /* dynamic */ + .psize = 0, + .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DGENERIC, + .valid = 1, + .name = "SDRAM Kernel", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = 0, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DNON_CHBL, + .valid = 1, + .name = "SDRAM RAM MTD", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = SIZE_1M, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .d_conf = SDRAM_DNON_CHBL, + .valid = 1,//(DMA_UNCACHED_REGION > 0), + .name = "SDRAM Uncached DMA ZONE", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = 0, + .attr = SWITCH_T | D_CPLB, + .i_conf = 0, /* dynamic */ + .d_conf = 0, /* dynamic */ + .valid = 1, + .name = "SDRAM Reserved Memory", + }, + { + .start = ASYNC_BANK0_BASE, + .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE, + .psize = 0, + .attr = SWITCH_T | D_CPLB, + .d_conf = SDRAM_EBIU, + .valid = 1, + .name = "ASYNC Memory", + }, + { +#if defined(CONFIG_BF561) + .start = L2_SRAM, + .end = L2_SRAM_END, + .psize = SIZE_1M, + .attr = SWITCH_T | D_CPLB, + .i_conf = L2_MEMORY, + .d_conf = L2_MEMORY, + .valid = 1, +#else + .valid = 0, +#endif + .name = "L2 Memory", + } +}; +#endif diff --git a/include/asm-blackfin/cpumask.h b/include/asm-blackfin/cpumask.h new file mode 100644 index 0000000000..b20a8e9012 --- /dev/null +++ b/include/asm-blackfin/cpumask.h @@ -0,0 +1,6 @@ +#ifndef _ASM_BLACKFIN_CPUMASK_H +#define _ASM_BLACKFIN_CPUMASK_H + +#include + +#endif /* _ASM_BLACKFIN_CPUMASK_H */ diff --git a/include/asm-blackfin/cputime.h b/include/asm-blackfin/cputime.h new file mode 100644 index 0000000000..2b19705f98 --- /dev/null +++ b/include/asm-blackfin/cputime.h @@ -0,0 +1,6 @@ +#ifndef __BLACKFIN_CPUTIME_H +#define __BLACKFIN_CPUTIME_H + +#include + +#endif /* __BLACKFIN_CPUTIME_H */ diff --git a/include/asm-blackfin/current.h b/include/asm-blackfin/current.h new file mode 100644 index 0000000000..31918d2912 --- /dev/null +++ b/include/asm-blackfin/current.h @@ -0,0 +1,23 @@ +#ifndef _BLACKFIN_CURRENT_H +#define _BLACKFIN_CURRENT_H +/* + * current.h + * (C) Copyright 2000, Lineo, David McCullough + * + * rather than dedicate a register (as the m68k source does), we + * just keep a global, we should probably just change it all to be + * current and lose _current_task. + */ +#include + +struct task_struct; + +static inline struct task_struct *get_current(void) __attribute__ ((__const__)); +static inline struct task_struct *get_current(void) +{ + return (current_thread_info()->task); +} + +#define current (get_current()) + +#endif /* _BLACKFIN_CURRENT_H */ diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h new file mode 100644 index 0000000000..52e7a10d7f --- /dev/null +++ b/include/asm-blackfin/delay.h @@ -0,0 +1,44 @@ +#ifndef _BLACKFIN_DELAY_H +#define _BLACKFIN_DELAY_H + +static inline void __delay(unsigned long loops) +{ + +/* FIXME: Currently the assembler doesn't recognize Loop Register Clobbers, + uncomment this as soon those are implemented */ +/* + __asm__ __volatile__ ( "\t LSETUP (1f,1f) LC0= %0\n\t" + "1:\t NOP;\n\t" + : :"a" (loops) + : "LT0","LB0","LC0"); + +*/ + + __asm__ __volatile__("[--SP] = LC0;\n\t" + "[--SP] = LT0;\n\t" + "[--SP] = LB0;\n\t" + "LSETUP (1f,1f) LC0 = %0;\n\t" + "1:\t NOP;\n\t" + "LB0 = [SP++];\n\t" + "LT0 = [SP++];\n\t" + "LC0 = [SP++];\n" + : + :"a" (loops)); +} + +#include /* needed for HZ */ + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ +static inline void udelay(unsigned long usecs) +{ + extern unsigned long loops_per_jiffy; + __delay(usecs * loops_per_jiffy / (1000000 / HZ)); +} + +#endif /* defined(_BLACKFIN_DELAY_H) */ diff --git a/include/asm-blackfin/device.h b/include/asm-blackfin/device.h new file mode 100644 index 0000000000..d8f9872b0e --- /dev/null +++ b/include/asm-blackfin/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + diff --git a/include/asm-blackfin/div64.h b/include/asm-blackfin/div64.h new file mode 100644 index 0000000000..6cd978cefb --- /dev/null +++ b/include/asm-blackfin/div64.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-blackfin/dma-mapping.h b/include/asm-blackfin/dma-mapping.h new file mode 100644 index 0000000000..7a77d7fe3a --- /dev/null +++ b/include/asm-blackfin/dma-mapping.h @@ -0,0 +1,66 @@ +#ifndef _BLACKFIN_DMA_MAPPING_H +#define _BLACKFIN_DMA_MAPPING_H + +#include + +void dma_alloc_init(unsigned long start, unsigned long end); +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp); +void dma_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle); + +/* + * Now for the API extensions over the pci_ one + */ +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +/* + * Map a single buffer of the indicated size for DMA in streaming mode. + * The 32-bit bus address to use is returned. + * + * Once the device is given the dma address, the device owns this memory + * until either pci_unmap_single or pci_dma_sync_single is performed. + */ +extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction); + +/* + * Unmap a single streaming mode DMA translation. The dma_addr and size + * must match what was provided for in a previous pci_map_single call. All + * other usages are undefined. + * + * After this call, reads by the cpu to the buffer are guarenteed to see + * whatever the device wrote there. + */ +extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction); + +/* + * Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scather-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction); + +/* + * Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, enum dma_data_direction direction); + +#endif /* _BLACKFIN_DMA_MAPPING_H */ diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h new file mode 100644 index 0000000000..be0d913e55 --- /dev/null +++ b/include/asm-blackfin/dma.h @@ -0,0 +1,188 @@ +/* + * File: include/asm-blackfin/simple_bf533_dma.h + * Based on: none - original work + * Author: LG Soft India + * Copyright (C) 2004-2005 Analog Devices Inc. + * Created: Tue Sep 21 2004 + * Description: This file contains the major Data structures and constants + * used for DMA Implementation in BF533 + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BLACKFIN_DMA_H_ +#define _BLACKFIN_DMA_H_ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define MAX_DMA_ADDRESS PAGE_OFFSET + +/***************************************************************************** +* Generic DMA Declarations +* +****************************************************************************/ +enum dma_chan_status { + DMA_CHANNEL_FREE, + DMA_CHANNEL_REQUESTED, + DMA_CHANNEL_ENABLED, +}; + +/*------------------------- + * config reg bits value + *-------------------------*/ +#define DATA_SIZE_8 0 +#define DATA_SIZE_16 1 +#define DATA_SIZE_32 2 + +#define DMA_FLOW_STOP 0 +#define DMA_FLOW_AUTO 1 +#define DMA_FLOW_ARRAY 4 +#define DMA_FLOW_SMALL 6 +#define DMA_FLOW_LARGE 7 + +#define DIMENSION_LINEAR 0 +#define DIMENSION_2D 1 + +#define DIR_READ 0 +#define DIR_WRITE 1 + +#define INTR_DISABLE 0 +#define INTR_ON_BUF 2 +#define INTR_ON_ROW 3 + +struct dmasg { + unsigned long next_desc_addr; + unsigned long start_addr; + unsigned short cfg; + unsigned short x_count; + short x_modify; + unsigned short y_count; + short y_modify; +} __attribute__((packed)); + +struct dma_register { + unsigned long next_desc_ptr; /* DMA Next Descriptor Pointer register */ + unsigned long start_addr; /* DMA Start address register */ + + unsigned short cfg; /* DMA Configuration register */ + unsigned short dummy1; /* DMA Configuration register */ + + unsigned long reserved; + + unsigned short x_count; /* DMA x_count register */ + unsigned short dummy2; + + short x_modify; /* DMA x_modify register */ + unsigned short dummy3; + + unsigned short y_count; /* DMA y_count register */ + unsigned short dummy4; + + short y_modify; /* DMA y_modify register */ + unsigned short dummy5; + + unsigned long curr_desc_ptr; /* DMA Current Descriptor Pointer + register */ + unsigned short curr_addr_ptr_lo; /* DMA Current Address Pointer + register */ + unsigned short curr_addr_ptr_hi; /* DMA Current Address Pointer + register */ + unsigned short irq_status; /* DMA irq status register */ + unsigned short dummy6; + + unsigned short peripheral_map; /* DMA peripheral map register */ + unsigned short dummy7; + + unsigned short curr_x_count; /* DMA Current x-count register */ + unsigned short dummy8; + + unsigned long reserved2; + + unsigned short curr_y_count; /* DMA Current y-count register */ + unsigned short dummy9; + + unsigned long reserved3; + +}; + +typedef irqreturn_t(*dma_interrupt_t) (int irq, void *dev_id); + +struct dma_channel { + struct mutex dmalock; + char *device_id; + enum dma_chan_status chan_status; + struct dma_register *regs; + struct dmasg *sg; /* large mode descriptor */ + unsigned int ctrl_num; /* controller number */ + dma_interrupt_t irq_callback; + void *data; + unsigned int dma_enable_flag; + unsigned int loopback_flag; +}; + +/******************************************************************************* +* DMA API's +*******************************************************************************/ +/* functions to set register mode */ +void set_dma_start_addr(unsigned int channel, unsigned long addr); +void set_dma_next_desc_addr(unsigned int channel, unsigned long addr); +void set_dma_x_count(unsigned int channel, unsigned short x_count); +void set_dma_x_modify(unsigned int channel, short x_modify); +void set_dma_y_count(unsigned int channel, unsigned short y_count); +void set_dma_y_modify(unsigned int channel, short y_modify); +void set_dma_config(unsigned int channel, unsigned short config); +unsigned short set_bfin_dma_config(char direction, char flow_mode, + char intr_mode, char dma_mode, char width); + +/* get curr status for polling */ +unsigned short get_dma_curr_irqstat(unsigned int channel); +unsigned short get_dma_curr_xcount(unsigned int channel); +unsigned short get_dma_curr_ycount(unsigned int channel); + +/* set large DMA mode descriptor */ +void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg); + +/* check if current channel is in use */ +int dma_channel_active(unsigned int channel); + +/* common functions must be called in any mode */ +void free_dma(unsigned int channel); +int dma_channel_active(unsigned int channel); /* check if a channel is in use */ +void disable_dma(unsigned int channel); +void enable_dma(unsigned int channel); +int request_dma(unsigned int channel, char *device_id); +int set_dma_callback(unsigned int channel, dma_interrupt_t callback, + void *data); +void dma_disable_irq(unsigned int channel); +void dma_enable_irq(unsigned int channel); +void clear_dma_irqstat(unsigned int channel); +void *dma_memcpy(void *dest, const void *src, size_t count); +void *safe_dma_memcpy(void *dest, const void *src, size_t count); + +#endif diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h new file mode 100644 index 0000000000..f162edb230 --- /dev/null +++ b/include/asm-blackfin/dpmc.h @@ -0,0 +1,70 @@ +/* + * include/asm-blackfin/dpmc.h - Miscellaneous IOCTL commands for Dynamic Power + * Management Controller Driver. + * Copyright (C) 2004 Analog Device Inc. + * + */ +#ifndef _BLACKFIN_DPMC_H_ +#define _BLACKFIN_DPMC_H_ + +#define SLEEP_MODE 1 +#define DEEP_SLEEP_MODE 2 +#define ACTIVE_PLL_DISABLED 3 +#define FULLON_MODE 4 +#define ACTIVE_PLL_ENABLED 5 +#define HIBERNATE_MODE 6 + +#define IOCTL_FULL_ON_MODE _IO('s', 0xA0) +#define IOCTL_ACTIVE_MODE _IO('s', 0xA1) +#define IOCTL_SLEEP_MODE _IO('s', 0xA2) +#define IOCTL_DEEP_SLEEP_MODE _IO('s', 0xA3) +#define IOCTL_HIBERNATE_MODE _IO('s', 0xA4) +#define IOCTL_CHANGE_FREQUENCY _IOW('s', 0xA5, unsigned long) +#define IOCTL_CHANGE_VOLTAGE _IOW('s', 0xA6, unsigned long) +#define IOCTL_SET_CCLK _IOW('s', 0xA7, unsigned long) +#define IOCTL_SET_SCLK _IOW('s', 0xA8, unsigned long) +#define IOCTL_GET_PLLSTATUS _IOW('s', 0xA9, unsigned long) +#define IOCTL_GET_CORECLOCK _IOW('s', 0xAA, unsigned long) +#define IOCTL_GET_SYSTEMCLOCK _IOW('s', 0xAB, unsigned long) +#define IOCTL_GET_VCO _IOW('s', 0xAC, unsigned long) +#define IOCTL_DISABLE_WDOG_TIMER _IO('s', 0xAD) +#define IOCTL_UNMASK_WDOG_WAKEUP_EVENT _IO('s',0xAE) +#define IOCTL_PROGRAM_WDOG_TIMER _IOW('s',0xAF,unsigned long) +#define IOCTL_CLEAR_WDOG_WAKEUP_EVENT _IO('s',0xB0) +#define IOCTL_SLEEP_DEEPER_MODE _IO('s',0xB1) + +#define DPMC_MINOR 254 + +#define ON 0 +#define OFF 1 + +#ifdef __KERNEL__ + +unsigned long calc_volt(void); +int calc_vlev(int vlt); +unsigned long change_voltage(unsigned long volt); +int calc_msel(int vco_hz); +unsigned long change_frequency(unsigned long vco_mhz); +int set_pll_div(unsigned short sel, unsigned char flag); +int get_vco(void); +unsigned long change_system_clock(unsigned long clock); +unsigned long change_core_clock(unsigned long clock); +unsigned long get_pll_status(void); +void change_baud(int baud); +void fullon_mode(void); +void active_mode(void); +void sleep_mode(u32 sic_iwr); +void deep_sleep(u32 sic_iwr); +void hibernate_mode(u32 sic_iwr); +void sleep_deeper(u32 sic_iwr); +void program_wdog_timer(unsigned long); +void unmask_wdog_wakeup_evt(void); +void clear_wdog_wakeup_evt(void); +void disable_wdog_timer(void); + +extern unsigned long get_cclk(void); +extern unsigned long get_sclk(void); + +#endif /* __KERNEL__ */ + +#endif /*_BLACKFIN_DPMC_H_*/ diff --git a/include/asm-blackfin/elf.h b/include/asm-blackfin/elf.h new file mode 100644 index 0000000000..5264b5536a --- /dev/null +++ b/include/asm-blackfin/elf.h @@ -0,0 +1,127 @@ +/* Changes made by LG Soft Oct 2004*/ + +#ifndef __ASMBFIN_ELF_H +#define __ASMBFIN_ELF_H + +/* + * ELF register definitions.. + */ + +#include +#include + +/* Processor specific flags for the ELF header e_flags field. */ +#define EF_BFIN_PIC 0x00000001 /* -fpic */ +#define EF_BFIN_FDPIC 0x00000002 /* -mfdpic */ +#define EF_BFIN_CODE_IN_L1 0x00000010 /* --code-in-l1 */ +#define EF_BFIN_DATA_IN_L1 0x00000020 /* --data-in-l1 */ + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_bfinfp_struct elf_fpregset_t; +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_BLACKFIN) + +#define elf_check_fdpic(x) ((x)->e_flags & EF_BFIN_FDPIC /* && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS) */) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_BFIN_PIC) + +/* EM_BLACKFIN defined in linux/elf.h */ + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_BLACKFIN + +#define ELF_PLAT_INIT(_r) _r->p1 = 0 + +#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr) \ +do { \ + _regs->r7 = 0; \ + _regs->p0 = _exec_map_addr; \ + _regs->p1 = _interp_map_addr; \ + _regs->p2 = _dynamic_addr; \ +} while(0) + +#define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_BFIN_FDPIC +#define ELF_EXEC_PAGESIZE 4096 + +#define R_unused0 0 /* relocation type 0 is not defined */ +#define R_pcrel5m2 1 /*LSETUP part a */ +#define R_unused1 2 /* relocation type 2 is not defined */ +#define R_pcrel10 3 /* type 3, if cc jump */ +#define R_pcrel12_jump 4 /* type 4, jump */ +#define R_rimm16 5 /* type 0x5, rN = */ +#define R_luimm16 6 /* # 0x6, preg.l= Load imm 16 to lower half */ +#define R_huimm16 7 /* # 0x7, preg.h= Load imm 16 to upper half */ +#define R_pcrel12_jump_s 8 /* # 0x8 jump.s */ +#define R_pcrel24_jump_x 9 /* # 0x9 jump.x */ +#define R_pcrel24 10 /* # 0xa call , not expandable */ +#define R_unusedb 11 /* # 0xb not generated */ +#define R_unusedc 12 /* # 0xc not used */ +#define R_pcrel24_jump_l 13 /*0xd jump.l */ +#define R_pcrel24_call_x 14 /* 0xE, call.x if is above 24 bit limit call through P1 */ +#define R_var_eq_symb 15 /* 0xf, linker should treat it same as 0x12 */ +#define R_byte_data 16 /* 0x10, .byte var = symbol */ +#define R_byte2_data 17 /* 0x11, .byte2 var = symbol */ +#define R_byte4_data 18 /* 0x12, .byte4 var = symbol and .var var=symbol */ +#define R_pcrel11 19 /* 0x13, lsetup part b */ +#define R_unused14 20 /* 0x14, undefined */ +#define R_unused15 21 /* not generated by VDSP 3.5 */ + +/* arithmetic relocations */ +#define R_push 0xE0 +#define R_const 0xE1 +#define R_add 0xE2 +#define R_sub 0xE3 +#define R_mult 0xE4 +#define R_div 0xE5 +#define R_mod 0xE6 +#define R_lshift 0xE7 +#define R_rshift 0xE8 +#define R_and 0xE9 +#define R_or 0xEA +#define R_xor 0xEB +#define R_land 0xEC +#define R_lor 0xED +#define R_len 0xEE +#define R_neg 0xEF +#define R_comp 0xF0 +#define R_page 0xF1 +#define R_hwpage 0xF2 +#define R_addr 0xF3 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE 0xD0000000UL + +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ + memcpy((char *) &pr_reg, (char *)regs, \ + sizeof(struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#ifdef __KERNEL__ +#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) +#endif + +#endif diff --git a/include/asm-blackfin/emergency-restart.h b/include/asm-blackfin/emergency-restart.h new file mode 100644 index 0000000000..27f6c785d1 --- /dev/null +++ b/include/asm-blackfin/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h new file mode 100644 index 0000000000..562c6d3a32 --- /dev/null +++ b/include/asm-blackfin/entry.h @@ -0,0 +1,56 @@ +#ifndef __BFIN_ENTRY_H +#define __BFIN_ENTRY_H + +#include +#include + +#ifdef __ASSEMBLY__ + +#define LFLUSH_I_AND_D 0x00000808 +#define LSIGTRAP 5 + +/* process bits for task_struct.flags */ +#define PF_TRACESYS_OFF 3 +#define PF_TRACESYS_BIT 5 +#define PF_PTRACED_OFF 3 +#define PF_PTRACED_BIT 4 +#define PF_DTRACE_OFF 1 +#define PF_DTRACE_BIT 5 + +/* This one is used for exceptions, emulation, and NMI. It doesn't push + RETI and doesn't do cli. */ +#define SAVE_ALL_SYS save_context_no_interrupts +/* This is used for all normal interrupts. It saves a minimum of registers + to the stack, loads the IRQ number, and jumps to common code. */ +#define INTERRUPT_ENTRY(N) \ + [--sp] = SYSCFG; \ + \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + R0 = (N); \ + jump __common_int_entry; + +/* For timer interrupts, we need to save IPEND, since the user_mode + macro accesses it to determine where to account time. */ +#define TIMER_INTERRUPT_ENTRY(N) \ + [--sp] = SYSCFG; \ + \ + [--sp] = P0; /*orig_p0*/ \ + [--sp] = R0; /*orig_r0*/ \ + [--sp] = (R7:0,P5:0); \ + p0.l = lo(IPEND); \ + p0.h = hi(IPEND); \ + r1 = [p0]; \ + R0 = (N); \ + jump __common_int_entry; + +/* This one pushes RETI without using CLI. Interrupts are enabled. */ +#define SAVE_CONTEXT_SYSCALL save_context_syscall +#define SAVE_CONTEXT save_context_with_interrupts + +#define RESTORE_ALL_SYS restore_context_no_interrupts +#define RESTORE_CONTEXT restore_context_with_interrupts + +#endif /* __ASSEMBLY__ */ +#endif /* __BFIN_ENTRY_H */ diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h new file mode 100644 index 0000000000..164e4f39bb --- /dev/null +++ b/include/asm-blackfin/errno.h @@ -0,0 +1,6 @@ +#ifndef _BFIN_ERRNO_H +#define _BFIN_ERRNO_H + +#include + +#endif /* _BFIN_ERRNO_H */ diff --git a/include/asm-blackfin/fcntl.h b/include/asm-blackfin/fcntl.h new file mode 100644 index 0000000000..9c40371278 --- /dev/null +++ b/include/asm-blackfin/fcntl.h @@ -0,0 +1,13 @@ +#ifndef _BFIN_FCNTL_H +#define _BFIN_FCNTL_H + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 + +#include + +#endif diff --git a/include/asm-blackfin/flat.h b/include/asm-blackfin/flat.h new file mode 100644 index 0000000000..e70074e05f --- /dev/null +++ b/include/asm-blackfin/flat.h @@ -0,0 +1,58 @@ +/* + * include/asm-blackfin/flat.h -- uClinux flat-format executables + * + * Copyright (C) 2003, + * + */ + +#ifndef __BLACKFIN_FLAT_H__ +#define __BLACKFIN_FLAT_H__ + +#include + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 0 +#define flat_old_ram_flag(flags) (flags) + +extern unsigned long bfin_get_addr_from_rp (unsigned long *ptr, + unsigned long relval, + unsigned long flags, + unsigned long *persistent); + +extern void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr, + unsigned long relval); + +/* The amount by which a relocation can exceed the program image limits + without being regarded as an error. */ + +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) + +#define flat_get_addr_from_rp(rp, relval, flags, persistent) \ + bfin_get_addr_from_rp(rp, relval, flags, persistent) +#define flat_put_addr_at_rp(rp, val, relval) \ + bfin_put_addr_at_rp(rp, val, relval) + +/* Convert a relocation entry into an address. */ +static inline unsigned long +flat_get_relocate_addr (unsigned long relval) +{ + return relval & 0x03ffffff; /* Mask out top 6 bits */ +} + +static inline int flat_set_persistent(unsigned long relval, + unsigned long *persistent) +{ + int type = (relval >> 26) & 7; + if (type == 3) { + *persistent = relval << 16; + return 1; + } + return 0; +} + +static inline int flat_addr_absolute(unsigned long relval) +{ + return (relval & (1 << 29)) != 0; +} + +#endif /* __BLACKFIN_FLAT_H__ */ diff --git a/include/asm-blackfin/futex.h b/include/asm-blackfin/futex.h new file mode 100644 index 0000000000..6a332a9f09 --- /dev/null +++ b/include/asm-blackfin/futex.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include + +#endif diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h new file mode 100644 index 0000000000..d16fe3cd61 --- /dev/null +++ b/include/asm-blackfin/gpio.h @@ -0,0 +1,367 @@ +/* + * File: arch/blackfin/kernel/bfin_gpio.h + * Based on: + * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +* Number BF537/6/4 BF561 BF533/2/1 +* +* GPIO_0 PF0 PF0 PF0 +* GPIO_1 PF1 PF1 PF1 +* GPIO_2 PF2 PF2 PF2 +* GPIO_3 PF3 PF3 PF3 +* GPIO_4 PF4 PF4 PF4 +* GPIO_5 PF5 PF5 PF5 +* GPIO_6 PF6 PF6 PF6 +* GPIO_7 PF7 PF7 PF7 +* GPIO_8 PF8 PF8 PF8 +* GPIO_9 PF9 PF9 PF9 +* GPIO_10 PF10 PF10 PF10 +* GPIO_11 PF11 PF11 PF11 +* GPIO_12 PF12 PF12 PF12 +* GPIO_13 PF13 PF13 PF13 +* GPIO_14 PF14 PF14 PF14 +* GPIO_15 PF15 PF15 PF15 +* GPIO_16 PG0 PF16 +* GPIO_17 PG1 PF17 +* GPIO_18 PG2 PF18 +* GPIO_19 PG3 PF19 +* GPIO_20 PG4 PF20 +* GPIO_21 PG5 PF21 +* GPIO_22 PG6 PF22 +* GPIO_23 PG7 PF23 +* GPIO_24 PG8 PF24 +* GPIO_25 PG9 PF25 +* GPIO_26 PG10 PF26 +* GPIO_27 PG11 PF27 +* GPIO_28 PG12 PF28 +* GPIO_29 PG13 PF29 +* GPIO_30 PG14 PF30 +* GPIO_31 PG15 PF31 +* GPIO_32 PH0 PF32 +* GPIO_33 PH1 PF33 +* GPIO_34 PH2 PF34 +* GPIO_35 PH3 PF35 +* GPIO_36 PH4 PF36 +* GPIO_37 PH5 PF37 +* GPIO_38 PH6 PF38 +* GPIO_39 PH7 PF39 +* GPIO_40 PH8 PF40 +* GPIO_41 PH9 PF41 +* GPIO_42 PH10 PF42 +* GPIO_43 PH11 PF43 +* GPIO_44 PH12 PF44 +* GPIO_45 PH13 PF45 +* GPIO_46 PH14 PF46 +* GPIO_47 PH15 PF47 +*/ + +#ifndef __ARCH_BLACKFIN_GPIO_H__ +#define __ARCH_BLACKFIN_GPIO_H__ + +#define gpio_bank(x) ((x) >> 4) +#define gpio_bit(x) (1<<((x) & 0xF)) +#define gpio_sub_n(x) ((x) & 0xF) + +#define GPIO_BANKSIZE 16 + +#define GPIO_0 0 +#define GPIO_1 1 +#define GPIO_2 2 +#define GPIO_3 3 +#define GPIO_4 4 +#define GPIO_5 5 +#define GPIO_6 6 +#define GPIO_7 7 +#define GPIO_8 8 +#define GPIO_9 9 +#define GPIO_10 10 +#define GPIO_11 11 +#define GPIO_12 12 +#define GPIO_13 13 +#define GPIO_14 14 +#define GPIO_15 15 +#define GPIO_16 16 +#define GPIO_17 17 +#define GPIO_18 18 +#define GPIO_19 19 +#define GPIO_20 20 +#define GPIO_21 21 +#define GPIO_22 22 +#define GPIO_23 23 +#define GPIO_24 24 +#define GPIO_25 25 +#define GPIO_26 26 +#define GPIO_27 27 +#define GPIO_28 28 +#define GPIO_29 29 +#define GPIO_30 30 +#define GPIO_31 31 +#define GPIO_32 32 +#define GPIO_33 33 +#define GPIO_34 34 +#define GPIO_35 35 +#define GPIO_36 36 +#define GPIO_37 37 +#define GPIO_38 38 +#define GPIO_39 39 +#define GPIO_40 40 +#define GPIO_41 41 +#define GPIO_42 42 +#define GPIO_43 43 +#define GPIO_44 44 +#define GPIO_45 45 +#define GPIO_46 46 +#define GPIO_47 47 + + +#define PERIPHERAL_USAGE 1 +#define GPIO_USAGE 0 + +#ifdef BF533_FAMILY +#define MAX_BLACKFIN_GPIOS 16 +#endif + +#ifdef BF537_FAMILY +#define MAX_BLACKFIN_GPIOS 48 +#define PORT_F 0 +#define PORT_G 1 +#define PORT_H 2 +#define PORT_J 3 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 +#define GPIO_PH9 41 +#define GPIO_PH10 42 +#define GPIO_PH11 43 +#define GPIO_PH12 44 +#define GPIO_PH13 45 +#define GPIO_PH14 46 +#define GPIO_PH15 47 + +#endif + +#ifdef BF561_FAMILY +#define MAX_BLACKFIN_GPIOS 48 +#define PORT_FIO0 0 +#define PORT_FIO1 1 +#define PORT_FIO2 2 +#endif + +#ifndef __ASSEMBLY__ + +/*********************************************************** +* +* FUNCTIONS: Blackfin General Purpose Ports Access Functions +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* +* +* DESCRIPTION: These functions abstract direct register access +* to Blackfin processor General Purpose +* Ports Regsiters +* +* CAUTION: These functions do not belong to the GPIO Driver API +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +void set_gpio_dir(unsigned short, unsigned short); +void set_gpio_inen(unsigned short, unsigned short); +void set_gpio_polar(unsigned short, unsigned short); +void set_gpio_edge(unsigned short, unsigned short); +void set_gpio_both(unsigned short, unsigned short); +void set_gpio_data(unsigned short, unsigned short); +void set_gpio_maska(unsigned short, unsigned short); +void set_gpio_maskb(unsigned short, unsigned short); +void set_gpio_toggle(unsigned short); +void set_gpiop_dir(unsigned short, unsigned short); +void set_gpiop_inen(unsigned short, unsigned short); +void set_gpiop_polar(unsigned short, unsigned short); +void set_gpiop_edge(unsigned short, unsigned short); +void set_gpiop_both(unsigned short, unsigned short); +void set_gpiop_data(unsigned short, unsigned short); +void set_gpiop_maska(unsigned short, unsigned short); +void set_gpiop_maskb(unsigned short, unsigned short); +unsigned short get_gpio_dir(unsigned short); +unsigned short get_gpio_inen(unsigned short); +unsigned short get_gpio_polar(unsigned short); +unsigned short get_gpio_edge(unsigned short); +unsigned short get_gpio_both(unsigned short); +unsigned short get_gpio_maska(unsigned short); +unsigned short get_gpio_maskb(unsigned short); +unsigned short get_gpio_data(unsigned short); +unsigned short get_gpiop_dir(unsigned short); +unsigned short get_gpiop_inen(unsigned short); +unsigned short get_gpiop_polar(unsigned short); +unsigned short get_gpiop_edge(unsigned short); +unsigned short get_gpiop_both(unsigned short); +unsigned short get_gpiop_maska(unsigned short); +unsigned short get_gpiop_maskb(unsigned short); +unsigned short get_gpiop_data(unsigned short); + +struct gpio_port_t { + unsigned short data; + unsigned short dummy1; + unsigned short data_clear; + unsigned short dummy2; + unsigned short data_set; + unsigned short dummy3; + unsigned short toggle; + unsigned short dummy4; + unsigned short maska; + unsigned short dummy5; + unsigned short maska_clear; + unsigned short dummy6; + unsigned short maska_set; + unsigned short dummy7; + unsigned short maska_toggle; + unsigned short dummy8; + unsigned short maskb; + unsigned short dummy9; + unsigned short maskb_clear; + unsigned short dummy10; + unsigned short maskb_set; + unsigned short dummy11; + unsigned short maskb_toggle; + unsigned short dummy12; + unsigned short dir; + unsigned short dummy13; + unsigned short polar; + unsigned short dummy14; + unsigned short edge; + unsigned short dummy15; + unsigned short both; + unsigned short dummy16; + unsigned short inen; +}; + +#ifdef CONFIG_PM +#define PM_WAKE_RISING 0x1 +#define PM_WAKE_FALLING 0x2 +#define PM_WAKE_HIGH 0x4 +#define PM_WAKE_LOW 0x8 +#define PM_WAKE_BOTH_EDGES (PM_WAKE_RISING | PM_WAKE_FALLING) + +int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type); +void gpio_pm_wakeup_free(unsigned short gpio); +unsigned int gpio_pm_setup(void); +void gpio_pm_restore(void); + +struct gpio_port_s { + unsigned short data; + unsigned short data_clear; + unsigned short data_set; + unsigned short toggle; + unsigned short maska; + unsigned short maska_clear; + unsigned short maska_set; + unsigned short maska_toggle; + unsigned short maskb; + unsigned short maskb_clear; + unsigned short maskb_set; + unsigned short maskb_toggle; + unsigned short dir; + unsigned short polar; + unsigned short edge; + unsigned short both; + unsigned short inen; + + unsigned short fer; +}; +#endif /*CONFIG_PM*/ + +/*********************************************************** +* +* FUNCTIONS: Blackfin GPIO Driver +* +* INPUTS/OUTPUTS: +* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS +* +* +* DESCRIPTION: Blackfin GPIO Driver API +* +* CAUTION: +************************************************************* +* MODIFICATION HISTORY : +**************************************************************/ + +int gpio_request(unsigned short, const char *); +void gpio_free(unsigned short); + +void gpio_set_value(unsigned short gpio, unsigned short arg); +unsigned short gpio_get_value(unsigned short gpio); + +#define gpio_get_value(gpio) get_gpio_data(gpio) +#define gpio_set_value(gpio, value) set_gpio_data(gpio, value) + +void gpio_direction_input(unsigned short gpio); +void gpio_direction_output(unsigned short gpio); + +#endif /* __ASSEMBLY__ */ + +#endif /* __ARCH_BLACKFIN_GPIO_H__ */ diff --git a/include/asm-blackfin/hardirq.h b/include/asm-blackfin/hardirq.h new file mode 100644 index 0000000000..0cab0d35ba --- /dev/null +++ b/include/asm-blackfin/hardirq.h @@ -0,0 +1,41 @@ +#ifndef __BFIN_HARDIRQ_H +#define __BFIN_HARDIRQ_H + +#include +#include +#include + +typedef struct { + unsigned int __softirq_pending; + unsigned int __syscall_count; + struct task_struct *__ksoftirqd_task; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +/* + * We put the hardirq and softirq counter into the preemption + * counter. The bitmask has the following meaning: + * + * - bits 0-7 are the preemption count (max preemption depth: 256) + * - bits 8-15 are the softirq count (max # of softirqs: 256) + * - bits 16-23 are the hardirq count (max # of hardirqs: 256) + * + * - ( bit 26 is the PREEMPT_ACTIVE flag. ) + * + * PREEMPT_MASK: 0x000000ff + * HARDIRQ_MASK: 0x0000ff00 + * SOFTIRQ_MASK: 0x00ff0000 + */ + +#define HARDIRQ_BITS 8 + +#ifdef NR_IRQS +# if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +# endif +#endif + +#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1 + +#endif diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h new file mode 100644 index 0000000000..5b51eaec01 --- /dev/null +++ b/include/asm-blackfin/hw_irq.h @@ -0,0 +1,6 @@ +#ifndef __ASM_BFIN_HW_IRQ_H +#define __ASM_BFIN_HW_IRQ_H + +/* Dummy include. */ + +#endif diff --git a/include/asm-blackfin/ide.h b/include/asm-blackfin/ide.h new file mode 100644 index 0000000000..41b2db46a1 --- /dev/null +++ b/include/asm-blackfin/ide.h @@ -0,0 +1,32 @@ +/****************************************************************************/ + +/* + * linux/include/asm-blackfin/ide.h + * + * Copyright (C) 1994-1996 Linus Torvalds & authors + * Copyright (C) 2001 Lineo Inc., davidm@snapgear.com + * Copyright (C) 2002 Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2002 Yoshinori Sato (ysato@users.sourceforge.jp) + * Copyright (C) 2005 Hennerich Michael (hennerich@blackfin.uclinux.org) + */ + +/****************************************************************************/ +#ifndef _BLACKFIN_IDE_H +#define _BLACKFIN_IDE_H +/****************************************************************************/ +#ifdef __KERNEL__ +/****************************************************************************/ + +#define MAX_HWIFS 1 + +/* Legacy ... BLK_DEV_IDECS */ +#define IDE_ARCH_OBSOLETE_INIT +#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ + + +#include + +/****************************************************************************/ +#endif /* __KERNEL__ */ +#endif /* _BLACKFIN_IDE_H */ +/****************************************************************************/ diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h new file mode 100644 index 0000000000..7e6995e80d --- /dev/null +++ b/include/asm-blackfin/io.h @@ -0,0 +1,207 @@ +#ifndef _BFIN_IO_H +#define _BFIN_IO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include +#endif +#include + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the bfin architecture, we just read/write the + * memory location directly. + */ +#ifndef __ASSEMBLY__ + +static inline unsigned char readb(void __iomem *addr) +{ + unsigned int val; + int tmp; + + __asm__ __volatile__ ("cli %1;\n\t" + "NOP; NOP; SSYNC;\n\t" + "%0 = b [%2] (z);\n\t" + "sti %1;\n\t" + : "=d"(val), "=d"(tmp): "a"(addr) + ); + + return (unsigned char) val; +} + +static inline unsigned short readw(void __iomem *addr) +{ + unsigned int val; + int tmp; + + __asm__ __volatile__ ("cli %1;\n\t" + "NOP; NOP; SSYNC;\n\t" + "%0 = w [%2] (z);\n\t" + "sti %1;\n\t" + : "=d"(val), "=d"(tmp): "a"(addr) + ); + + return (unsigned short) val; +} + +static inline unsigned int readl(void __iomem *addr) +{ + unsigned int val; + int tmp; + + __asm__ __volatile__ ("cli %1;\n\t" + "NOP; NOP; SSYNC;\n\t" + "%0 = [%2];\n\t" + "sti %1;\n\t" + : "=d"(val), "=d"(tmp): "a"(addr) + ); + return val; +} + +#endif /* __ASSEMBLY__ */ + +#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +#define inb(addr) readb(addr) +#define inw(addr) readw(addr) +#define inl(addr) readl(addr) +#define outb(x,addr) ((void) writeb(x,addr)) +#define outw(x,addr) ((void) writew(x,addr)) +#define outl(x,addr) ((void) writel(x,addr)) + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) + +#define ioread8_rep(a,d,c) insb(a,d,c) +#define ioread16_rep(a,d,c) insw(a,d,c) +#define ioread32_rep(a,d,c) insl(a,d,c) +#define iowrite8_rep(a,s,c) outsb(a,s,c) +#define iowrite16_rep(a,s,c) outsw(a,s,c) +#define iowrite32_rep(a,s,c) outsl(a,s,c) + +#define ioread8(X) readb(X) +#define ioread16(X) readw(X) +#define ioread32(X) readl(X) +#define iowrite8(val,X) writeb(val,X) +#define iowrite16(val,X) writew(val,X) +#define iowrite32(val,X) writel(val,X) + +#define IO_SPACE_LIMIT 0xffffffff + +/* Values for nocacheflag and cmode */ +#define IOMAP_NOCACHE_SER 1 + +#ifndef __ASSEMBLY__ + +extern void outsb(void __iomem *port, const void *addr, unsigned long count); +extern void outsw(void __iomem *port, const void *addr, unsigned long count); +extern void outsl(void __iomem *port, const void *addr, unsigned long count); + +extern void insb(const void __iomem *port, void *addr, unsigned long count); +extern void insw(const void __iomem *port, void *addr, unsigned long count); +extern void insl(const void __iomem *port, void *addr, unsigned long count); + +/* + * Map some physical address range into the kernel address space. + */ +static inline void __iomem *__ioremap(unsigned long physaddr, unsigned long size, + int cacheflag) +{ + return (void __iomem *)physaddr; +} + +/* + * Unmap a ioremap()ed region again + */ +static inline void iounmap(void *addr) +{ +} + +/* + * __iounmap unmaps nearly everything, so be careful + * it doesn't free currently pointer/page tables anymore but it + * wans't used anyway and might be added later. + */ +static inline void __iounmap(void *addr, unsigned long size) +{ +} + +/* + * Set new cache mode for some kernel address space. + * The caller must push data for that range itself, if such data may already + * be in the cache. + */ +static inline void kernel_set_cachemode(void *addr, unsigned long size, + int cmode) +{ +} + +static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void __iomem *ioremap_nocache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +extern void blkfin_inv_cache_all(void); + +#endif + +#define ioport_map(port, nr) ((void __iomem*)(port)) +#define ioport_unmap(addr) + +#define dma_cache_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) + +/* Pages to physical address... */ +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) + +#define mm_ptov(vaddr) ((void *) (vaddr)) +#define mm_vtop(vaddr) ((unsigned long) (vaddr)) +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _BFIN_IO_H */ diff --git a/include/asm-blackfin/ioctl.h b/include/asm-blackfin/ioctl.h new file mode 100644 index 0000000000..b279fe06df --- /dev/null +++ b/include/asm-blackfin/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-blackfin/ioctls.h b/include/asm-blackfin/ioctls.h new file mode 100644 index 0000000000..8356204151 --- /dev/null +++ b/include/asm-blackfin/ioctls.h @@ -0,0 +1,82 @@ +#ifndef __ARCH_BFIN_IOCTLS_H__ +#define __ARCH_BFIN_IOCTLS_H__ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __ARCH_BFIN_IOCTLS_H__ */ diff --git a/include/asm-blackfin/ipc.h b/include/asm-blackfin/ipc.h new file mode 100644 index 0000000000..a46e3d9c2a --- /dev/null +++ b/include/asm-blackfin/ipc.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-blackfin/ipcbuf.h b/include/asm-blackfin/ipcbuf.h new file mode 100644 index 0000000000..8f0899cdf4 --- /dev/null +++ b/include/asm-blackfin/ipcbuf.h @@ -0,0 +1,30 @@ +/* Changes origined from m68k version. Lineo Inc. May 2001 */ + +#ifndef __BFIN_IPCBUF_H__ +#define __BFIN_IPCBUF_H__ + +/* + * The user_ipc_perm structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm { + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __BFIN_IPCBUF_H__ */ diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h new file mode 100644 index 0000000000..65480dab24 --- /dev/null +++ b/include/asm-blackfin/irq.h @@ -0,0 +1,70 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. + */ + +#ifndef _BFIN_IRQ_H_ +#define _BFIN_IRQ_H_ + +#include +#include + +/******************************************************************************* + ***** INTRODUCTION *********** + * On the Blackfin, the interrupt structure allows remmapping of the hardware + * levels. + * - I'm going to assume that the H/W level is going to stay at the default + * settings. If someone wants to go through and abstart this out, feel free + * to mod the interrupt numbering scheme. + * - I'm abstracting the interrupts so that uClinux does not know anything + * about the H/W levels. If you want to change the H/W AND keep the abstracted + * levels that uClinux sees, you should be able to do most of it here. + * - I've left the "abstract" numbering sparce in case someone wants to pull the + * interrupts apart (just the TX/RX for the various devices) + *******************************************************************************/ + +/* SYS_IRQS and NR_IRQS are defined in */ + +/* + * Machine specific interrupt sources. + * + * Adding an interrupt service routine for a source with this bit + * set indicates a special machine specific interrupt source. + * The machine specific files define these sources. + * + * The IRQ_MACHSPEC bit is now gone - the only thing it did was to + * introduce unnecessary overhead. + * + * All interrupt handling is actually machine specific so it is better + * to use function pointers, as used by the Sparc port, and select the + * interrupt handling functions when initializing the kernel. This way + * we save some unnecessary overhead at run-time. + * 01/11/97 - Jes + */ + +extern void ack_bad_irq(unsigned int irq); + +static __inline__ int irq_canonicalize(int irq) +{ + return irq; +} + +/* count of spurious interrupts */ +/* extern volatile unsigned int num_spurious; */ + +#ifndef NO_IRQ +#define NO_IRQ ((unsigned int)(-1)) +#endif + +#endif /* _BFIN_IRQ_H_ */ diff --git a/include/asm-blackfin/irq_handler.h b/include/asm-blackfin/irq_handler.h new file mode 100644 index 0000000000..d830f0a49a --- /dev/null +++ b/include/asm-blackfin/irq_handler.h @@ -0,0 +1,22 @@ +#ifndef _IRQ_HANDLER_H +#define _IRQ_HANDLER_H + +/* BASE LEVEL interrupt handler routines */ +asmlinkage void evt_emulation(void); +asmlinkage void evt_exception(void); +asmlinkage void trap(void); +asmlinkage void evt_ivhw(void); +asmlinkage void evt_timer(void); +asmlinkage void evt_evt2(void); +asmlinkage void evt_evt7(void); +asmlinkage void evt_evt8(void); +asmlinkage void evt_evt9(void); +asmlinkage void evt_evt10(void); +asmlinkage void evt_evt11(void); +asmlinkage void evt_evt12(void); +asmlinkage void evt_evt13(void); +asmlinkage void evt_soft_int1(void); +asmlinkage void evt_system_call(void); +asmlinkage void init_exception_buff(void); + +#endif diff --git a/include/asm-blackfin/irq_regs.h b/include/asm-blackfin/irq_regs.h new file mode 100644 index 0000000000..3dd9c0b702 --- /dev/null +++ b/include/asm-blackfin/irq_regs.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-blackfin/kdebug.h b/include/asm-blackfin/kdebug.h new file mode 100644 index 0000000000..6ece1b0376 --- /dev/null +++ b/include/asm-blackfin/kdebug.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-blackfin/kmap_types.h b/include/asm-blackfin/kmap_types.h new file mode 100644 index 0000000000..e215f71049 --- /dev/null +++ b/include/asm-blackfin/kmap_types.h @@ -0,0 +1,21 @@ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/include/asm-blackfin/l1layout.h b/include/asm-blackfin/l1layout.h new file mode 100644 index 0000000000..c13ded7778 --- /dev/null +++ b/include/asm-blackfin/l1layout.h @@ -0,0 +1,31 @@ +/* + * l1layout.h + * Defines a layout of L1 scratchpad memory that userspace can rely on. + */ + +#ifndef _L1LAYOUT_H_ +#define _L1LAYOUT_H_ + +#include + +#ifndef __ASSEMBLY__ + +/* Data that is "mapped" into the process VM at the start of the L1 scratch + memory, so that each process can access it at a fixed address. Used for + stack checking. */ +struct l1_scratch_task_info +{ + /* Points to the start of the stack. */ + void *stack_start; + /* Not updated by the kernel; a user process can modify this to + keep track of the lowest address of the stack pointer during its + runtime. */ + void *lowest_sp; +}; + +/* A pointer to the structure in memory. */ +#define L1_SCRATCH_TASK_INFO ((struct l1_scratch_task_info *)L1_SCRATCH_START) + +#endif + +#endif diff --git a/include/asm-blackfin/linkage.h b/include/asm-blackfin/linkage.h new file mode 100644 index 0000000000..5a822bb790 --- /dev/null +++ b/include/asm-blackfin/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .align 4 +#define __ALIGN_STR ".align 4" + +#endif diff --git a/include/asm-blackfin/local.h b/include/asm-blackfin/local.h new file mode 100644 index 0000000000..75afffbc64 --- /dev/null +++ b/include/asm-blackfin/local.h @@ -0,0 +1,6 @@ +#ifndef __BLACKFIN_LOCAL_H +#define __BLACKFIN_LOCAL_H + +#include + +#endif /* __BLACKFIN_LOCAL_H */ diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h new file mode 100644 index 0000000000..a84d390934 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -0,0 +1,175 @@ +/* + * File: include/asm-blackfin/mach-bf533/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List + * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List + * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.2 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2)) +#error Kernel will not work on BF533 Version 0.1 or 0.2 +#endif + +/* Issues that are common to 0.5, 0.4, and 0.3 silicon */ +#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on + every corresponding match */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits*/ +#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not + functional */ +#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable + state */ +#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic + control */ +#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when + killed in a particular stage*/ +#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC + registers are interrupted */ +#define ANOMALY_05000311 /* Erroneous flag pin operations under specific sequences*/ + +#endif + +/* These issues only occur on 0.3 or 0.4 BF533 */ +#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not + updated at the same time. */ +#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data + Cache Fill can be corrupted after or during + Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General + Purpose TX or RX modes */ +#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by + preceding memory read */ +#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during + inactive channels in certain conditions */ +#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag + situation */ +#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ +#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ +#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect + data*/ +#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate + Differences in certain Conditions */ +#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ +#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to + hardware reset */ +#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or + IDLE around a Change of Control causes + unpredictable results */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the + shadow of a conditional branch */ +#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware + errors */ +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#define ANOMALY_05000257 /* An interrupt or exception during short Hardware + loops may cause the instruction fetch unit to + malfunction */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of + the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE + instruction will cause an infinite stall in the + second to last instruction in a hardware loop */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to increase. */ +#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to decrease */ +#endif + +/* These issues are only on 0.4 silicon */ +#if (defined(CONFIG_BF_REV_0_4)) +#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) */ +#endif + +/* These issues are only on 0.3 silicon */ +#if defined(CONFIG_BF_REV_0_3) +#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with + External Frame Syncs */ +#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative + Instruction or Data Fetches, or by Fetches at the + boundary of reserved memory space */ +#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs + when polarity setting is changed */ +#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data + corruption */ +#define ANOMALY_05000199 /* DMA current address shows wrong value during carry + fix */ +#define ANOMALY_05000201 /* Receive frame sync not ignored during active + frames in sport MCM */ +#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA + stopping */ +#if defined(CONFIG_BF533) +#define ANOMALY_05000204 /* Incorrect data read with write-through cache and + allocate cache lines on reads only mode */ +#endif /* CONFIG_BF533 */ +#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ +#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain + instructions */ +#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame + Sync Transmit Mode */ +#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */ +#endif + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h new file mode 100644 index 0000000000..185fc12848 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/bf533.h @@ -0,0 +1,306 @@ +/* + * File: include/asm-blackfin/mach-bf533/bf533.h + * Based on: + * Author: + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF533_H__ +#define __MACH_BF533_H__ + +#define SUPPORTED_REVID 2 + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BLKFIN_DSUBBANKS 4 +#define BLKFIN_DWAYS 2 +#define BLKFIN_DLINES 64 +#define BLKFIN_ISUBBANKS 4 +#define BLKFIN_IWAYS 4 +#define BLKFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/* IAR0 BIT FIELDS*/ +#define RTC_ERROR_BIT 0x0FFFFFFF +#define UART_ERROR_BIT 0xF0FFFFFF +#define SPORT1_ERROR_BIT 0xFF0FFFFF +#define SPI_ERROR_BIT 0xFFF0FFFF +#define SPORT0_ERROR_BIT 0xFFFF0FFF +#define PPI_ERROR_BIT 0xFFFFF0FF +#define DMA_ERROR_BIT 0xFFFFFF0F +#define PLLWAKE_ERROR_BIT 0xFFFFFFFF + +/* IAR1 BIT FIELDS*/ +#define DMA7_UARTTX_BIT 0x0FFFFFFF +#define DMA6_UARTRX_BIT 0xF0FFFFFF +#define DMA5_SPI_BIT 0xFF0FFFFF +#define DMA4_SPORT1TX_BIT 0xFFF0FFFF +#define DMA3_SPORT1RX_BIT 0xFFFF0FFF +#define DMA2_SPORT0TX_BIT 0xFFFFF0FF +#define DMA1_SPORT0RX_BIT 0xFFFFFF0F +#define DMA0_PPI_BIT 0xFFFFFFFF + +/* IAR2 BIT FIELDS*/ +#define WDTIMER_BIT 0x0FFFFFFF +#define MEMDMA1_BIT 0xF0FFFFFF +#define MEMDMA0_BIT 0xFF0FFFFF +#define PFB_BIT 0xFFF0FFFF +#define PFA_BIT 0xFFFF0FFF +#define TIMER2_BIT 0xFFFFF0FF +#define TIMER1_BIT 0xFFFFFF0F +#define TIMER0_BIT 0xFFFFFFFF + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#define MAX_VC 650000000 +#define MIN_VC 50000000 + +#ifdef CONFIG_BFIN_KERNEL_CLOCK +/********************************PLL Settings **************************************/ +#if (CONFIG_VCO_MULT < 0) +#error "VCO Multiplier is less than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT == 0) +#error "VCO Multiplier should be greater than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT > 64) +#error "VCO Multiplier is more than 64. Please select a different value" +#endif + +#ifndef CONFIG_CLKIN_HALF +#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +#else +#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +#endif + +#ifndef CONFIG_PLL_BYPASS +#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (CONFIG_SCLK_DIV < 1) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_SCLK_DIV > 15) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_CCLK_DIV != 1) +#if (CONFIG_CCLK_DIV != 2) +#if (CONFIG_CCLK_DIV != 4) +#if (CONFIG_CCLK_DIV != 8) +#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" +#endif +#endif +#endif +#endif + +#if (CONFIG_VCO_HZ > MAX_VC) +#error "VCO selected is more than maximum value. Please change the VCO multipler" +#endif + +#if (CONFIG_SCLK_HZ > 133000000) +#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ < 27000000) +#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ) +#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) +#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) +#error "Please select sclk less than cclk" +#endif +#endif +#endif + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) +#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK +#endif + +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#ifdef CONFIG_BF533 +#define CPU "BF533" +#define CPUID 0x027a5000 +#endif +#ifdef CONFIG_BF532 +#define CPU "BF532" +#define CPUID 0x0275A000 +#endif +#ifdef CONFIG_BF531 +#define CPU "BF531" +#define CPUID 0x027a5000 +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#if (CONFIG_MEM_SIZE % 4) +#error "SDRAM mem size must be multible of 4MB" +#endif + +#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) +#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) +#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158_WORKAROUND 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#else /*Write Through */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#endif + +#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) +#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) +#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) + +#define SIZE_1K 0x00000400 /* 1K */ +#define SIZE_4K 0x00001000 /* 4K */ +#define SIZE_1M 0x00100000 /* 1M */ +#define SIZE_4M 0x00400000 /* 4M */ + +#define MAX_CPLBS (16 * 2) + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 1 for ASYNC Memory +*/ + + +#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ + +#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) + +#endif /* __MACH_BF533_H__ */ diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h new file mode 100644 index 0000000000..23bf76aa34 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -0,0 +1,108 @@ +#include +#include + +#define NR_PORTS 1 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) + +#ifdef CONFIG_BFIN_UART0_CTSRTS +# define CONFIG_SERIAL_BFIN_CTSRTS +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif +#endif + +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#else + struct work_struct cts_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int cts_pin; + int rts_pin; +#endif +}; + +struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { + 0xFFC00400, + IRQ_UART_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART_TX, + CH_UART_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif +}; + + +int nr_ports = NR_PORTS; +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, NULL); + gpio_direction_input(uart->cts_pin); + } + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, NULL); + gpio_direction_input(uart->rts_pin); + } +#endif +} diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h new file mode 100644 index 0000000000..e4384491e9 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/blackfin.h @@ -0,0 +1,45 @@ +/* + * File: include/asm-blackfin/mach-bf533/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF533_FAMILY + +#include "bf533.h" +#include "mem_map.h" +#include "defBF532.h" +#include "anomaly.h" + +#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +#include "cdefBF532.h" +#endif + +#endif /* _MACH_BLACKFIN_H_ */ diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h new file mode 100644 index 0000000000..1d7c494ceb --- /dev/null +++ b/include/asm-blackfin/mach-bf533/cdefBF532.h @@ -0,0 +1,706 @@ +/* + * File: include/asm-blackfin/mach-bf533/cdefBF532.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF532_H +#define _CDEF_BF532_H +/* +#if !defined(__ADSPLPBLACKFIN__) +#warning cdefBF532.h should only be included for 532 compatible chips. +#endif +*/ +/*include all Core registers and bit definitions*/ +#include "defBF532.h" + +/*include core specific register pointer definitions*/ +#include + +#include + +/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val) +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST,val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + bfin_write16(VR_CTL, val); + __builtin_bfin_ssync(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + local_irq_save(flags); + asm("IDLE;"); + local_irq_restore(flags); + bfin_write32(SIC_IWR, iwr); +} + +/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1,val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2,val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3,val) +#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) +#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK,val) +#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR) +#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR,val) +#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR) +#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR,val) + +/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL,val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT,val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT,val) + +/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */ +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT,val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL,val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT,val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT,val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM,val) +#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) +#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST,val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val) + +/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */ +#define bfin_read_FIO_DIR() bfin_read16(FIO_DIR) +#define bfin_write_FIO_DIR(val) bfin_write16(FIO_DIR,val) +#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) +#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val) +#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) +#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val) +#define bfin_read_FIO_MASKA_C() bfin_read16(FIO_MASKA_C) +#define bfin_write_FIO_MASKA_C(val) bfin_write16(FIO_MASKA_C,val) +#define bfin_read_FIO_MASKA_S() bfin_read16(FIO_MASKA_S) +#define bfin_write_FIO_MASKA_S(val) bfin_write16(FIO_MASKA_S,val) +#define bfin_read_FIO_MASKB_C() bfin_read16(FIO_MASKB_C) +#define bfin_write_FIO_MASKB_C(val) bfin_write16(FIO_MASKB_C,val) +#define bfin_read_FIO_MASKB_S() bfin_read16(FIO_MASKB_S) +#define bfin_write_FIO_MASKB_S(val) bfin_write16(FIO_MASKB_S,val) +#define bfin_read_FIO_POLAR() bfin_read16(FIO_POLAR) +#define bfin_write_FIO_POLAR(val) bfin_write16(FIO_POLAR,val) +#define bfin_read_FIO_EDGE() bfin_read16(FIO_EDGE) +#define bfin_write_FIO_EDGE(val) bfin_write16(FIO_EDGE,val) +#define bfin_read_FIO_BOTH() bfin_read16(FIO_BOTH) +#define bfin_write_FIO_BOTH(val) bfin_write16(FIO_BOTH,val) +#define bfin_read_FIO_INEN() bfin_read16(FIO_INEN) +#define bfin_write_FIO_INEN(val) bfin_write16(FIO_INEN,val) +#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) +#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val) +#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) +#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val) +#define bfin_read_FIO_MASKA_D() bfin_read16(FIO_MASKA_D) +#define bfin_write_FIO_MASKA_D(val) bfin_write16(FIO_MASKA_D,val) +#define bfin_read_FIO_MASKA_T() bfin_read16(FIO_MASKA_T) +#define bfin_write_FIO_MASKA_T(val) bfin_write16(FIO_MASKA_T,val) +#define bfin_read_FIO_MASKB_D() bfin_read16(FIO_MASKB_D) +#define bfin_write_FIO_MASKB_D(val) bfin_write16(FIO_MASKB_D,val) +#define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T) +#define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val) + +/* DMA Traffic controls */ +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val) + +/* DMA Controller */ +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR,val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR,val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT,val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT,val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY,val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY,val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR,val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR,val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT,val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT,val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS,val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP,val) + +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG,val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR,val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT,val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT,val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY,val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY,val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR,val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR,val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT,val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT,val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS,val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP,val) + +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG,val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR,val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT,val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT,val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY,val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY,val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR,val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR,val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT,val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT,val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS,val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP,val) + +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG,val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR,val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR,val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT,val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT,val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY,val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY,val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR,val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR,val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT,val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT,val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS,val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP,val) + +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG,val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR,val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR,val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT,val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT,val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY,val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY,val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR,val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR,val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT,val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT,val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS,val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP,val) + +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG,val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR,val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR,val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT,val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT,val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY,val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY,val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR,val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR,val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT,val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT,val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS,val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP,val) + +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG,val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR,val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR,val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT,val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT,val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY,val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY,val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR,val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR,val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT,val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT,val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS,val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP,val) + +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG,val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR,val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR,val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT,val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT,val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY,val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY,val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR,val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR,val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT,val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT,val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS,val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG,val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR,val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT,val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT,val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY,val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY,val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR,val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS,val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG,val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR,val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT,val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT,val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY,val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY,val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR,val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS,val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG,val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR,val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT,val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT,val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY,val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY,val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR,val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS,val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG,val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR,val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT,val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT,val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY,val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY,val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR,val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS,val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val) + +/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val) + +/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */ +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL,val) + +/* UART Controller */ +#define bfin_read_UART_THR() bfin_read16(UART_THR) +#define bfin_write_UART_THR(val) bfin_write16(UART_THR,val) +#define bfin_read_UART_RBR() bfin_read16(UART_RBR) +#define bfin_write_UART_RBR(val) bfin_write16(UART_RBR,val) +#define bfin_read_UART_DLL() bfin_read16(UART_DLL) +#define bfin_write_UART_DLL(val) bfin_write16(UART_DLL,val) +#define bfin_read_UART_IER() bfin_read16(UART_IER) +#define bfin_write_UART_IER(val) bfin_write16(UART_IER,val) +#define bfin_read_UART_DLH() bfin_read16(UART_DLH) +#define bfin_write_UART_DLH(val) bfin_write16(UART_DLH,val) +#define bfin_read_UART_IIR() bfin_read16(UART_IIR) +#define bfin_write_UART_IIR(val) bfin_write16(UART_IIR,val) +#define bfin_read_UART_LCR() bfin_read16(UART_LCR) +#define bfin_write_UART_LCR(val) bfin_write16(UART_LCR,val) +#define bfin_read_UART_MCR() bfin_read16(UART_MCR) +#define bfin_write_UART_MCR(val) bfin_write16(UART_MCR,val) +#define bfin_read_UART_LSR() bfin_read16(UART_LSR) +#define bfin_write_UART_LSR(val) bfin_write16(UART_LSR,val) +/* +#define UART_MSR +*/ +#define bfin_read_UART_SCR() bfin_read16(UART_SCR) +#define bfin_write_UART_SCR(val) bfin_write16(UART_SCR,val) +#define bfin_read_UART_GCTL() bfin_read16(UART_GCTL) +#define bfin_write_UART_GCTL(val) bfin_write16(UART_GCTL,val) + +/* SPI Controller */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val) + +/* TIMER 0, 1, 2 Registers */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val) + +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val) + +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val) + +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE,val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE,val) +#define bfin_read_TIMER_STATUS() bfin_read16(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write16(TIMER_STATUS,val) + +/* SPORT0 Controller */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val) + +/* SPORT1 Controller */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val) + +/* Parallel Peripheral Interface (PPI) */ +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL,val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS,val) +#define bfin_clear_PPI_STATUS() bfin_read_PPI_STATUS() +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY,val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT,val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) + +#endif /* _CDEF_BF532_H */ diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h new file mode 100644 index 0000000000..b240a082aa --- /dev/null +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -0,0 +1,1175 @@ +/************************************************************************ + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + ************************************************************************/ +/* + * File: include/asm-blackfin/mach-bf533/defBF532.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ + +#ifndef _DEF_BF532_H +#define _DEF_BF532_H +/* +#if !defined(__ADSPLPBLACKFIN__) +#warning defBF532.h should only be included for 532 compatible chips +#endif +*/ +/* include all Core registers and bit definitions */ +#include + +/*********************************************************************************** */ +/* System MMR Register Map */ +/*********************************************************************************** */ +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ + +#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID Register */ +#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ +#define SYSCR 0xFFC00104 /* System Configuration registe */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART_THR 0xFFC00400 /* Transmit Holding register */ +#define UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART_LCR 0xFFC0040C /* Line Control Register */ +#define UART_MCR 0xFFC00410 /* Modem Control Register */ +#define UART_LSR 0xFFC00414 /* Line Status Register */ +#if 0 +#define UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ +#endif +#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */ + +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */ + +#define FIO_FLAG_D 0xFFC00700 /* Flag Mask to directly specify state of pins */ +#define FIO_FLAG_C 0xFFC00704 /* Peripheral Interrupt Flag Register (clear) */ +#define FIO_FLAG_S 0xFFC00708 /* Peripheral Interrupt Flag Register (set) */ +#define FIO_FLAG_T 0xFFC0070C /* Flag Mask to directly toggle state of pins */ +#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Register (set directly) */ +#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Register (clear) */ +#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Register (set) */ +#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Register (toggle) */ +#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Register (set directly) */ +#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Register (clear) */ +#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Register (set) */ +#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Register (toggle) */ +#define FIO_DIR 0xFFC00730 /* Peripheral Flag Direction Register */ +#define FIO_POLAR 0xFFC00734 /* Flag Source Polarity Register */ +#define FIO_EDGE 0xFFC00738 /* Flag Source Sensitivity Register */ +#define FIO_BOTH 0xFFC0073C /* Flag Set on BOTH Edges Register */ +#define FIO_INEN 0xFFC00740 /* Flag Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ + +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Traffic controls */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ + +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ + +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ + +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ + +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ + +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ + +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ + +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ + +#define MDMA_D1_CONFIG 0xFFC00E88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00E80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00E84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_X_COUNT 0xFFC00E90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_Y_COUNT 0xFFC00E98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00E94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00E9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00EA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00EA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00EB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00EB8 /* MemDMA Stream 1 Destination Current Y Count Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00EA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00EAC /* MemDMA Stream 1 Destination Peripheral Map Register */ + +#define MDMA_S1_CONFIG 0xFFC00EC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00EC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00EC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_X_COUNT 0xFFC00ED0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_Y_COUNT 0xFFC00ED8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00ED4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00EDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00EE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00EE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA Stream 1 Source Current Y Count Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00EE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00EEC /* MemDMA Stream 1 Source Peripheral Map Register */ + +#define MDMA_D0_CONFIG 0xFFC00E08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00E00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00E04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_X_COUNT 0xFFC00E10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_Y_COUNT 0xFFC00E18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00E14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00E1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00E20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00E24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00E30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00E38 /* MemDMA Stream 0 Destination Current Y Count Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00E28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00E2C /* MemDMA Stream 0 Destination Peripheral Map Register */ + +#define MDMA_S0_CONFIG 0xFFC00E48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00E40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00E44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_X_COUNT 0xFFC00E50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_Y_COUNT 0xFFC00E58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00E54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00E5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00E60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00E64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00E70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00E78 /* MemDMA Stream 0 Source Current Y Count Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00E68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00E6C /* MemDMA Stream 0 Source Peripheral Map Register */ + +/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */ + +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + +/*********************************************************************************** */ +/* System MMR Register Bits */ +/******************************************************************************* */ + +/* ********************* PLL AND RESET MASKS ************************ */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ +#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x00000008 /* Core clock off */ +#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ +#define BYPASS 0x00000100 /* Bypass the PLL */ + +/* PLL_DIV Masks */ + +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* SWRST Mask */ +#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ + + /* SIC_IAR0 Masks */ + +#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) ((x)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) ((x)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) ((x)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Masks */ + +#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) ((x)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) ((x)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) ((x)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Masks */ +#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) ((x)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) ((x)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) ((x)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) ((x)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ + +/* ********* WATCHDOG TIMER MASKS ********************8 */ + +/* Watchdog Timer WDOG_CTL Register */ +#define ICTL(x) ((x<<1) & 0x0006) +#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ +#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ +#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ +#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ + +#define TMR_EN 0x0000 +#define TMR_DIS 0x0AD0 +#define TRO 0x8000 + +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + +/* ***************************** UART CONTROLLER MASKS ********************** */ + +/* UART_LCR Register */ + +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* ********** SERIAL PORT MASKS ********************** */ + +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#define SLEN 0x001F /*TX Word Length */ +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN 0x001F /*RX Word Length */ +#define RXSE 0x0100 /*RX Secondary Enable */ +#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /*Right-First Data Order */ + +/*SPORTx_STAT Masks */ +#define RXNE 0x0001 /*RX FIFO Not Empty Status */ +#define RUVF 0x0002 /*RX Underflow Status */ +#define ROVF 0x0004 /*RX Overflow Status */ +#define TXF 0x0008 /*TX FIFO Full Status */ +#define TUVF 0x0010 /*TX Underflow Status */ +#define TOVF 0x0020 /*TX Overflow Status */ +#define TXHRE 0x0040 /*TX Hold Register Empty */ + +/*SPORTx_MCMC1 Masks */ +#define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ +#define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ + +/*SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ +#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /*Multichannel Frame Delay */ + +/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* ********** DMA CONTROLLER MASKS *********************8 */ + +/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define DMAFLOW 0x00007000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ + +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ + +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +/* ************* GENERAL PURPOSE TIMER MASKS ******************** */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x0001 +#define TIMIL1 0x0002 +#define TIMIL2 0x0004 +#define TOVL_ERR0 0x0010 +#define TOVL_ERR1 0x0020 +#define TOVL_ERR2 0x0040 +#define TRUN0 0x1000 +#define TRUN1 0x2000 +#define TRUN2 0x4000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TOVL_ERR0_P 0x04 +#define TOVL_ERR1_P 0x05 +#define TOVL_ERR2_P 0x06 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SPI_LEN 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ +#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ + +/* AMGCTL Masks */ +#define AMCKEN 0x00000001 /* Enable CLKOUT */ +#define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x00000008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* ********************** SDRAM CONTROLLER MASKS *************************** */ + +/* SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /*Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x00000001 /* Enable SDRAM external bank */ +#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + +/*VR_CTL Masks*/ +#define WAKE 0x100 +#define VLEV_6 0x60 +#define VLEV_7 0x70 +#define VLEV_8 0x80 +#define VLEV_9 0x90 +#define VLEV_10 0xA0 +#define VLEV_11 0xB0 +#define VLEV_12 0xC0 +#define VLEV_13 0xD0 +#define VLEV_14 0xE0 +#define VLEV_15 0xF0 +#define FREQ_3 0x03 + +#endif /* _DEF_BF532_H */ diff --git a/include/asm-blackfin/mach-bf533/dma.h b/include/asm-blackfin/mach-bf533/dma.h new file mode 100644 index 0000000000..bd9d5e9430 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/dma.h @@ -0,0 +1,54 @@ +/***************************************************************************** +* +* BF-533/2/1 Specific Declarations +* +****************************************************************************/ +/* + * File: include/asm-blackfin/mach-bf533/dma.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_BLACKFIN_DMA_CHANNEL 12 + +#define CH_PPI 0 +#define CH_SPORT0_RX 1 +#define CH_SPORT0_TX 2 +#define CH_SPORT1_RX 3 +#define CH_SPORT1_TX 4 +#define CH_SPI 5 +#define CH_UART_RX 6 +#define CH_UART_TX 7 +#define CH_MEM_STREAM0_DEST 8 /* TX */ +#define CH_MEM_STREAM0_SRC 9 /* RX */ +#define CH_MEM_STREAM1_DEST 10 /* TX */ +#define CH_MEM_STREAM1_SRC 11 /* RX */ + +#endif diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h new file mode 100644 index 0000000000..9879e68e31 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/irq.h @@ -0,0 +1,177 @@ +/* + * File: include/asm-blackfin/mach-bf533/defBF532.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BF533_IRQ_H_ +#define _BF533_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name +Core Emulation ** + Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + PLL Wakeup Interrupt IVG7 7 + DMA Error (generic) IVG7 8 + PPI Error Interrupt IVG7 9 + SPORT0 Error Interrupt IVG7 10 + SPORT1 Error Interrupt IVG7 11 + SPI Error Interrupt IVG7 12 + UART Error Interrupt IVG7 13 + RTC Interrupt IVG8 14 + DMA0 Interrupt (PPI) IVG8 15 + DMA1 (SPORT0 RX) IVG9 16 + DMA2 (SPORT0 TX) IVG9 17 + DMA3 (SPORT1 RX) IVG9 18 + DMA4 (SPORT1 TX) IVG9 19 + DMA5 (PPI) IVG10 20 + DMA6 (UART RX) IVG10 21 + DMA7 (UART TX) IVG10 22 + Timer0 IVG11 23 + Timer1 IVG11 24 + Timer2 IVG11 25 + PF Interrupt A IVG12 26 + PF Interrupt B IVG12 27 + DMA8/9 Interrupt IVG13 28 + DMA10/11 Interrupt IVG13 29 + Watchdog Timer IVG13 30 + Software Interrupt 1 IVG14 31 + Software Interrupt 2 -- + (lowest priority) IVG15 32 * + */ +#define SYS_IRQS 32 +#define NR_PERI_INTS 24 + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /*Emulation */ +#define IRQ_RST 1 /*reset */ +#define IRQ_NMI 2 /*Non Maskable */ +#define IRQ_EVX 3 /*Exception */ +#define IRQ_UNUSED 4 /*- unused interrupt*/ +#define IRQ_HWERR 5 /*Hardware Error */ +#define IRQ_CORETMR 6 /*Core timer */ + +#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */ +#define IRQ_DMA_ERROR 8 /*DMA Error (general) */ +#define IRQ_PPI_ERROR 9 /*PPI Error Interrupt */ +#define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */ +#define IRQ_UART_ERROR 13 /*UART Error Interrupt */ +#define IRQ_RTC 14 /*RTC Interrupt */ +#define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */ +#define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */ +#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */ +#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */ +#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */ +#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ +#define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */ +#define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */ +#define IRQ_TMR0 23 /*Timer 0 */ +#define IRQ_TMR1 24 /*Timer 1 */ +#define IRQ_TMR2 25 /*Timer 2 */ +#define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */ +#define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */ +#define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */ +#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */ +#define IRQ_WATCH 30 /*Watch Dog Timer */ + +#define IRQ_SW_INT1 31 /*Software Int 1 */ +#define IRQ_SW_INT2 32 /*Software Int 2 (reserved for SYSCALL) */ + +#define IRQ_PF0 33 +#define IRQ_PF1 34 +#define IRQ_PF2 35 +#define IRQ_PF3 36 +#define IRQ_PF4 37 +#define IRQ_PF5 38 +#define IRQ_PF6 39 +#define IRQ_PF7 40 +#define IRQ_PF8 41 +#define IRQ_PF9 42 +#define IRQ_PF10 43 +#define IRQ_PF11 44 +#define IRQ_PF12 45 +#define IRQ_PF13 46 +#define IRQ_PF14 47 +#define IRQ_PF15 48 + +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO +#define NR_IRQS (IRQ_PF15+1) +#else +#define NR_IRQS SYS_IRQS +#endif + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS*/ +#define RTC_ERROR_POS 28 +#define UART_ERROR_POS 24 +#define SPORT1_ERROR_POS 20 +#define SPI_ERROR_POS 16 +#define SPORT0_ERROR_POS 12 +#define PPI_ERROR_POS 8 +#define DMA_ERROR_POS 4 +#define PLLWAKE_ERROR_POS 0 + +/* IAR1 BIT FIELDS*/ +#define DMA7_UARTTX_POS 28 +#define DMA6_UARTRX_POS 24 +#define DMA5_SPI_POS 20 +#define DMA4_SPORT1TX_POS 16 +#define DMA3_SPORT1RX_POS 12 +#define DMA2_SPORT0TX_POS 8 +#define DMA1_SPORT0RX_POS 4 +#define DMA0_PPI_POS 0 + +/* IAR2 BIT FIELDS*/ +#define WDTIMER_POS 28 +#define MEMDMA1_POS 24 +#define MEMDMA0_POS 20 +#define PFB_POS 16 +#define PFA_POS 12 +#define TIMER2_POS 8 +#define TIMER1_POS 4 +#define TIMER0_POS 0 + +#endif /* _BF533_IRQ_H_ */ diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/include/asm-blackfin/mach-bf533/mem_init.h new file mode 100644 index 0000000000..1620dae525 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/mem_init.h @@ -0,0 +1,316 @@ +/* + * File: include/asm-blackfin/mach-bf533/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 8955223) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_1 +#define SDRAM_tRAS_num 1 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) + /*SDRAM INFORMATION: Modify this for your board */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_SIZE == 128) +#define SDRAM_SIZE EBSZ_128 +#endif +#if (CONFIG_MEM_SIZE == 64) +#define SDRAM_SIZE EBSZ_64 +#endif +#if (CONFIG_MEM_SIZE == 32) +#define SDRAM_SIZE EBSZ_32 +#endif +#if (CONFIG_MEM_SIZE == 16) +#define SDRAM_SIZE EBSZ_16 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 11) +#define SDRAM_WIDTH EBCAW_11 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 10) +#define SDRAM_WIDTH EBCAW_10 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 9) +#define SDRAM_WIDTH EBCAW_9 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 8) +#define SDRAM_WIDTH EBCAW_8 +#endif + +#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EBE) + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h new file mode 100644 index 0000000000..e84baa3e93 --- /dev/null +++ b/include/asm-blackfin/mach-bf533/mem_map.h @@ -0,0 +1,168 @@ + +/* + * File: include/asm-blackfin/mach-bf533/mem_map.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MEM_MAP_533_H_ +#define _MEM_MAP_533_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 + +/* Level 1 Memory */ + +#ifdef CONFIG_BLKFIN_CACHE +#define BLKFIN_ICACHESIZE (16*1024) +#else +#define BLKFIN_ICACHESIZE (0*1024) +#endif + +/* Memory Map for ADSP-BF533 processors */ + +#ifdef CONFIG_BF533 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#ifdef CONFIG_BLKFIN_CACHE +#define L1_CODE_LENGTH (0x14000 - 0x4000) +#else +#define L1_CODE_LENGTH 0x14000 +#endif + +#ifdef CONFIG_BLKFIN_DCACHE + +#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (16*1024) +#define BLKFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BLKFIN_DCACHESIZE (32*1024) +#define BLKFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (0*1024) +#define BLKFIN_DSUPBANKS 0 +#endif /*CONFIG_BLKFIN_DCACHE*/ +#endif + +/* Memory Map for ADSP-BF532 processors */ + +#ifdef CONFIG_BF532 +#define L1_CODE_START 0xFFA08000 +#define L1_DATA_A_START 0xFF804000 +#define L1_DATA_B_START 0xFF904000 + +#ifdef CONFIG_BLKFIN_CACHE +#define L1_CODE_LENGTH (0xC000 - 0x4000) +#else +#define L1_CODE_LENGTH 0xC000 +#endif + +#ifdef CONFIG_BLKFIN_DCACHE + +#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH 0x4000 +#define BLKFIN_DCACHESIZE (16*1024) +#define BLKFIN_DSUPBANKS 1 + +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH (0x4000 - 0x4000) +#define BLKFIN_DCACHESIZE (32*1024) +#define BLKFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x4000 +#define L1_DATA_B_LENGTH 0x4000 +#define BLKFIN_DCACHESIZE (0*1024) +#define BLKFIN_DSUPBANKS 0 +#endif /*CONFIG_BLKFIN_DCACHE*/ +#endif + +/* Memory Map for ADSP-BF531 processors */ + +#ifdef CONFIG_BF531 +#define L1_CODE_START 0xFFA08000 +#define L1_DATA_A_START 0xFF804000 +#define L1_DATA_B_START 0xFF904000 +#define L1_CODE_LENGTH 0x4000 +#define L1_DATA_B_LENGTH 0x0000 + + +#ifdef CONFIG_BLKFIN_DCACHE +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define BLKFIN_DCACHESIZE (16*1024) +#define BLKFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x4000 +#define BLKFIN_DCACHESIZE (0*1024) +#define BLKFIN_DSUPBANKS 0 +#endif + +#endif + +/* Scratch Pad Memory */ + +#if defined(CONFIG_BF533) || defined(CONFIG_BF532) || defined(CONFIG_BF531) +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 +#endif + +#endif /* _MEM_MAP_533_H_ */ diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h new file mode 100644 index 0000000000..7f040f5ba0 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -0,0 +1,120 @@ + +/* + * File: include/asm-blackfin/mach-bf537/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List + * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List + * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1)) +#error Kernel will not work on BF537/6/4 Version 0.1 +#endif + +#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits*/ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is + Changed */ +#endif +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic + control */ +#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when + killed in a particular stage*/ +#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC + registers are interrupted */ +#endif + +#if defined(CONFIG_BF_REV_0_2) +#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or + IDLE around a Change of Control causes + unpredictable results */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */ +#endif +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */ +#endif +#define ANOMALY_05000257 /* An interrupt or exception during short Hardware + loops may cause the instruction fetch unit to + malfunction */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of + the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE + instruction will cause an infinite stall in the + second to last instruction in a hardware loop */ +#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running + and non-zero DEB_TRAFFIC_PERIOD value */ +#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000280 /* SPI Master boot mode does not work well with + Atmel Dataflash devices */ + +#endif /* CONFIG_BF_REV_0_2 */ + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h new file mode 100644 index 0000000000..b8924cd773 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/bf537.h @@ -0,0 +1,287 @@ +/* + * File: include/asm-blackfin/mach-bf537/bf537.h + * Based on: + * Author: + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF537 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF537_H__ +#define __MACH_BF537_H__ + +#define SUPPORTED_REVID 2 + +/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */ + +#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */ +#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORTx_STAT */ +#define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ +#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ +#define UART_ERR_MASK_STAT1 (0x4) /* UARTx_IIR */ +#define UART_ERR_MASK_STAT0 (0x2) /* UARTx_IIR */ +#define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BLKFIN_DSUBBANKS 4 +#define BLKFIN_DWAYS 2 +#define BLKFIN_DLINES 64 +#define BLKFIN_ISUBBANKS 4 +#define BLKFIN_IWAYS 4 +#define BLKFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#define MAX_VC 650000000 +#define MIN_VC 50000000 + +/********************************PLL Settings **************************************/ +#ifdef CONFIG_BFIN_KERNEL_CLOCK +#if (CONFIG_VCO_MULT < 0) +#error "VCO Multiplier is less than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT == 0) +#error "VCO Multiplier should be greater than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT > 64) +#error "VCO Multiplier is more than 64. Please select a different value" +#endif + +#ifndef CONFIG_CLKIN_HALF +#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +#else +#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +#endif + +#ifndef CONFIG_PLL_BYPASS +#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (CONFIG_SCLK_DIV < 1) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_SCLK_DIV > 15) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_CCLK_DIV != 1) +#if (CONFIG_CCLK_DIV != 2) +#if (CONFIG_CCLK_DIV != 4) +#if (CONFIG_CCLK_DIV != 8) +#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" +#endif +#endif +#endif +#endif + +#if (CONFIG_VCO_HZ > MAX_VC) +#error "VCO selected is more than maximum value. Please change the VCO multipler" +#endif + +#if (CONFIG_SCLK_HZ > 133000000) +#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ < 27000000) +#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) +#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) +#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) +#error "Please select sclk less than cclk" +#endif +#endif +#endif + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) +#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK +#endif + +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#ifdef CONFIG_BF537 +#define CPU "BF537" +#define CPUID 0x027c8000 +#endif +#ifdef CONFIG_BF536 +#define CPU "BF536" +#define CPUID 0x027c8000 +#endif +#ifdef CONFIG_BF534 +#define CPU "BF534" +#define CPUID 0x027c6000 +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#if (CONFIG_MEM_SIZE % 4) +#error "SDRAM mem size must be multible of 4MB" +#endif + +#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) +#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) +#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158_WORKAROUND 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#else /*Write Through */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) +#endif + + +#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) +#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) +#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) + +#define SIZE_1K 0x00000400 /* 1K */ +#define SIZE_4K 0x00001000 /* 4K */ +#define SIZE_1M 0x00100000 /* 1M */ +#define SIZE_4M 0x00400000 /* 4M */ + +#define MAX_CPLBS (16 * 2) + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 1 for ASYNC Memory +*/ + + +#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ + +#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) + +#endif /* __MACH_BF537_H__ */ diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h new file mode 100644 index 0000000000..8f5d9c4d8d --- /dev/null +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -0,0 +1,147 @@ +#include +#include + +#define NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +# define CONFIG_SERIAL_BFIN_CTSRTS + +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 +# endif +#endif +/* + * The pin configuration is different from schematic + */ +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#else + struct work_struct cts_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int cts_pin; + int rts_pin; +#endif +}; + +struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + 0xFFC00400, + IRQ_UART0_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART0_TX, + CH_UART0_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + 0xFFC02000, + IRQ_UART1_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART1_TX, + CH_UART1_RX, +#endif +#ifdef CONFIG_BFIN_UART1_CTSRTS + CONFIG_UART1_CTS_PIN, + CONFIG_UART1_RTS_PIN, +#endif + }, +#endif +}; + +int nr_ports = ARRAY_SIZE(bfin_serial_resource); + +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + unsigned short val; + val = bfin_read16(BFIN_PORT_MUX); + val &= ~(PFDE | PFTE); + bfin_write16(BFIN_PORT_MUX, val); + + val = bfin_read16(PORTF_FER); + val |= 0xF; + bfin_write16(PORTF_FER, val); + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, NULL); + gpio_direction_input(uart->cts_pin); + } + + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, NULL); + gpio_direction_output(uart->rts_pin); + } +#endif +} diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h new file mode 100644 index 0000000000..bbd97051ec --- /dev/null +++ b/include/asm-blackfin/mach-bf537/blackfin.h @@ -0,0 +1,430 @@ +/* + * File: include/asm-blackfin/mach-bf537/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF537_FAMILY + +#include "bf537.h" +#include "mem_map.h" +#include "defBF534.h" +#include "anomaly.h" + +#if defined(CONFIG_BF537) || defined(CONFIG_BF536) +#include "defBF537.h" +#endif + +#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +#include "cdefBF534.h" + +/* UART 0*/ +#define bfin_read_UART_THR() bfin_read_UART0_THR() +#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) +#define bfin_read_UART_RBR() bfin_read_UART0_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) +#define bfin_read_UART_DLL() bfin_read_UART0_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) +#define bfin_read_UART_IER() bfin_read_UART0_IER() +#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) +#define bfin_read_UART_DLH() bfin_read_UART0_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) +#define bfin_read_UART_IIR() bfin_read_UART0_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) +#define bfin_read_UART_LCR() bfin_read_UART0_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) +#define bfin_read_UART_MCR() bfin_read_UART0_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) +#define bfin_read_UART_LSR() bfin_read_UART0_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) +#define bfin_read_UART_SCR() bfin_read_UART0_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) +#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) + +#if defined(CONFIG_BF537) || defined(CONFIG_BF536) +#include "cdefBF537.h" +#endif +#endif + +/* MAP used DEFINES from BF533 to BF537 - so we don't need to change them in the driver, kernel, etc. */ + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 + +/* UART 0*/ + +/* DMA Channnel */ +#define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX() +#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val) +#define CH_UART_RX CH_UART0_RX +#define bfin_read_CH_UART_TX() bfin_read_CH_UART0_TX() +#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART0_TX(val) +#define CH_UART_TX CH_UART0_TX + +/* System Interrupt Controller */ +#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART0_RX() +#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART0_RX(val) +#define IRQ_UART_RX IRQ_UART0_RX +#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART0_TX() +#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART0_TX(val) +#define IRQ_UART_TX IRQ_UART0_TX +#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART0_ERROR() +#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART0_ERROR(val) +#define IRQ_UART_ERROR IRQ_UART0_ERROR + +/* MMR Registers*/ +#define bfin_read_UART_THR() bfin_read_UART0_THR() +#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) +#define UART_THR UART0_THR +#define bfin_read_UART_RBR() bfin_read_UART0_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) +#define UART_RBR UART0_RBR +#define bfin_read_UART_DLL() bfin_read_UART0_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) +#define UART_DLL UART0_DLL +#define bfin_read_UART_IER() bfin_read_UART0_IER() +#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) +#define UART_IER UART0_IER +#define bfin_read_UART_DLH() bfin_read_UART0_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) +#define UART_DLH UART0_DLH +#define bfin_read_UART_IIR() bfin_read_UART0_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) +#define UART_IIR UART0_IIR +#define bfin_read_UART_LCR() bfin_read_UART0_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) +#define UART_LCR UART0_LCR +#define bfin_read_UART_MCR() bfin_read_UART0_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) +#define UART_MCR UART0_MCR +#define bfin_read_UART_LSR() bfin_read_UART0_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) +#define UART_LSR UART0_LSR +#define bfin_read_UART_SCR() bfin_read_UART0_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) +#define UART_SCR UART0_SCR +#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) +#define UART_GCTL UART0_GCTL + +/* DPMC*/ +#define bfin_read_STOPCK_OFF() bfin_read_STOPCK() +#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) +#define STOPCK_OFF STOPCK + +/* FIO USE PORT F*/ +#ifdef CONFIG_BF537_PORT_F +#define bfin_read_PORT_FER() bfin_read_PORTF_FER() +#define bfin_write_PORT_FER(val) bfin_write_PORTF_FER(val) +#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val) +#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val) +#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val) +#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val) +#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val) +#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val) +#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val) +#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val) +#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val) +#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val) +#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val) +#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val) +#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val) +#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR() +#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val) +#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE() +#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val) +#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH() +#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val) +#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val) + +#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val) +#define FIO_FLAG_D PORTFIO +#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val) +#define FIO_FLAG_C PORTFIO_CLEAR +#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val) +#define FIO_FLAG_S PORTFIO_SET +#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val) +#define FIO_FLAG_T PORTFIO_TOGGLE +#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val) +#define FIO_MASKA_D PORTFIO_MASKA +#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val) +#define FIO_MASKA_C PORTFIO_MASKA_CLEAR +#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val) +#define FIO_MASKA_S PORTFIO_MASKA_SET +#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val) +#define FIO_MASKA_T PORTFIO_MASKA_TOGGLE +#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val) +#define FIO_MASKB_D PORTFIO_MASKB +#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val) +#define FIO_MASKB_C PORTFIO_MASKB_CLEAR +#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val) +#define FIO_MASKB_S PORTFIO_MASKB_SET +#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val) +#define FIO_MASKB_T PORTFIO_MASKB_TOGGLE +#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val) +#define FIO_DIR PORTFIO_DIR +#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR() +#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val) +#define FIO_POLAR PORTFIO_POLAR +#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE() +#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val) +#define FIO_EDGE PORTFIO_EDGE +#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH() +#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val) +#define FIO_BOTH PORTFIO_BOTH +#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val) +#define FIO_INEN PORTFIO_INEN +#endif + +/* FIO USE PORT G*/ +#ifdef CONFIG_BF537_PORT_G +#define bfin_read_PORT_FER() bfin_read_PORTG_FER() +#define bfin_write_PORT_FER(val) bfin_write_PORTG_FER(val) +#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val) +#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val) +#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val) +#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val) +#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val) +#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val) +#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val) +#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val) +#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val) +#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val) +#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val) +#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val) +#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val) +#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR() +#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val) +#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE() +#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val) +#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH() +#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val) +#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val) + +#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val) +#define FIO_FLAG_D PORTGIO +#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val) +#define FIO_FLAG_C PORTGIO_CLEAR +#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val) +#define FIO_FLAG_S PORTGIO_SET +#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val) +#define FIO_FLAG_T PORTGIO_TOGGLE +#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val) +#define FIO_MASKA_D PORTGIO_MASKA +#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val) +#define FIO_MASKA_C PORTGIO_MASKA_CLEAR +#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val) +#define FIO_MASKA_S PORTGIO_MASKA_SET +#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val) +#define FIO_MASKA_T PORTGIO_MASKA_TOGGLE +#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val) +#define FIO_MASKB_D PORTGIO_MASKB +#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val) +#define FIO_MASKB_C PORTGIO_MASKB_CLEAR +#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val) +#define FIO_MASKB_S PORTGIO_MASKB_SET +#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val) +#define FIO_MASKB_T PORTGIO_MASKB_TOGGLE +#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val) +#define FIO_DIR PORTGIO_DIR +#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR() +#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val) +#define FIO_POLAR PORTGIO_POLAR +#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE() +#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val) +#define FIO_EDGE PORTGIO_EDGE +#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH() +#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val) +#define FIO_BOTH PORTGIO_BOTH +#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val) +#define FIO_INEN PORTGIO_INEN + +#endif + +/* FIO USE PORT H*/ +#ifdef CONFIG_BF537_PORT_H +#define bfin_read_PORT_FER() bfin_read_PORTH_FER() +#define bfin_write_PORT_FER(val) bfin_write_PORTH_FER(val) +#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val) +#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val) +#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val) +#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val) +#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val) +#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val) +#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val) +#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val) +#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val) +#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val) +#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val) +#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val) +#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val) +#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR() +#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val) +#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE() +#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val) +#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH() +#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val) +#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val) + +#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val) +#define FIO_FLAG_D PORTHIO +#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val) +#define FIO_FLAG_C PORTHIO_CLEAR +#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val) +#define FIO_FLAG_S PORTHIO_SET +#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val) +#define FIO_FLAG_T PORTHIO_TOGGLE +#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val) +#define FIO_MASKA_D PORTHIO_MASKA +#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val) +#define FIO_MASKA_C PORTHIO_MASKA_CLEAR +#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val) +#define FIO_MASKA_S PORTHIO_MASKA_SET +#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val) +#define FIO_MASKA_T PORTHIO_MASKA_TOGGLE +#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val) +#define FIO_MASKB_D PORTHIO_MASKB +#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val) +#define FIO_MASKB_C PORTHIO_MASKB_CLEAR +#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val) +#define FIO_MASKB_S PORTHIO_MASKB_SET +#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val) +#define FIO_MASKB_T PORTHIO_MASKB_TOGGLE +#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val) +#define FIO_DIR PORTHIO_DIR +#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR() +#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val) +#define FIO_POLAR PORTHIO_POLAR +#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE() +#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val) +#define FIO_EDGE PORTHIO_EDGE +#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH() +#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val) +#define FIO_BOTH PORTHIO_BOTH +#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val) +#define FIO_INEN PORTHIO_INEN + +#endif + +/* PLL_DIV Masks */ +#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ + +#endif diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/include/asm-blackfin/mach-bf537/cdefBF534.h new file mode 100644 index 0000000000..7b658c175f --- /dev/null +++ b/include/asm-blackfin/mach-bf537/cdefBF534.h @@ -0,0 +1,1823 @@ +/* + * File: include/asm-blackfin/mach-bf537/cdefbf534.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF534_H +#define _CDEF_BF534_H + +/* Include all Core registers and bit definitions */ +#include "defBF534.h" + +/* Include core specific register pointer definitions */ +#include + +#include + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + bfin_write16(VR_CTL, val); + __builtin_bfin_ssync(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + local_irq_save(flags); + asm("IDLE;"); + local_irq_restore(flags); + bfin_write32(SIC_IWR, iwr); +} +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST,val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val) +#define pSIC_RVECT ((void * volatile *)SIC_RVECT) +#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT,val) +#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) +#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK,val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1,val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2,val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3,val) +#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR) +#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR,val) +#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR) +#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR,val) + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL,val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT,val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT,val) + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT,val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL,val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT,val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT,val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM,val) +#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) +#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST,val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val) + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR,val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR,val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL,val) +#define bfin_read_UART0_IER() bfin_read16(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER,val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH,val) +#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) +#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR,val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR,val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR,val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR,val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR,val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR,val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL,val) + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val) + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val) + +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val) + +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val) + +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG,val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER,val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD,val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH,val) + +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG,val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER,val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD,val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH,val) + +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG,val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER,val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD,val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH,val) + +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG,val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER,val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD,val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH,val) + +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG,val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER,val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD,val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH,val) + +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE,val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE,val) +#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS,val) + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO,val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR,val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET,val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE,val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA,val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR,val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET,val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE,val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB,val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR,val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET,val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE,val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR,val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR,val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE,val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH,val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN,val) + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val) + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val) + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val) +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL,val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val) + +/* DMA Traffic Control Registers */ +#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER) +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) +#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) + +/* DMA Controller */ +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR,val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR,val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT,val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT,val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY,val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY,val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR,val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR,val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT,val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT,val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS,val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP,val) + +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG,val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR,val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT,val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT,val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY,val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY,val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR,val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR,val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT,val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT,val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS,val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP,val) + +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG,val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR,val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT,val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT,val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY,val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY,val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR,val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR,val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT,val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT,val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS,val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP,val) + +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG,val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR,val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR,val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT,val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT,val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY,val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY,val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR,val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR,val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT,val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT,val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS,val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP,val) + +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG,val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR,val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR,val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT,val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT,val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY,val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY,val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR,val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR,val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT,val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT,val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS,val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP,val) + +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG,val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR,val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR,val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT,val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT,val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY,val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY,val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR,val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR,val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT,val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT,val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS,val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP,val) + +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG,val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR,val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR,val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT,val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT,val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY,val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY,val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR,val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR,val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT,val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT,val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS,val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP,val) + +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG,val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR,val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR,val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT,val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT,val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY,val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY,val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR,val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR,val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT,val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT,val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS,val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP,val) + +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG,val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR,val) +#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR,val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT,val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT,val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY,val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY,val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR,val) +#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR,val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT,val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT,val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS,val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP,val) + +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG,val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR,val) +#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR,val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT,val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT,val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY,val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY,val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR,val) +#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR,val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT,val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT,val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS,val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP,val) + +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG,val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR,val) +#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR,val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT,val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT,val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY,val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY,val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR,val) +#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR,val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT,val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT,val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS,val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP,val) + +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG,val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR,val) +#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR,val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT,val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT,val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY,val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY,val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR,val) +#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR,val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT,val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT,val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS,val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG,val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR,val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT,val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT,val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY,val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY,val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR,val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS,val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG,val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR,val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT,val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT,val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY,val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY,val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR,val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS,val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG,val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR,val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT,val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT,val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY,val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY,val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR,val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS,val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG,val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR,val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT,val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT,val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY,val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY,val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR,val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS,val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val) + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL,val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS,val) +#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY,val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT,val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) +#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV,val) +#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) +#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL,val) +#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) +#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL,val) +#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) +#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT,val) +#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) +#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR,val) +#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) +#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL,val) +#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) +#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT,val) +#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) +#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR,val) +#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) +#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT,val) +#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) +#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK,val) +#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) +#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL,val) +#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) +#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT,val) +#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) +#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8,val) +#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) +#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16,val) +#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) +#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8,val) +#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) +#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16,val) + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define bfin_read_PORTGIO() bfin_read16(PORTGIO) +#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO,val) +#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) +#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR,val) +#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) +#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET,val) +#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) +#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE,val) +#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) +#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA,val) +#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) +#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR,val) +#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) +#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET,val) +#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) +#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE,val) +#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) +#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB,val) +#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) +#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR,val) +#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) +#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET,val) +#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) +#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE,val) +#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) +#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR,val) +#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) +#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR,val) +#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) +#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE,val) +#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) +#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH,val) +#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) +#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN,val) + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define bfin_read_PORTHIO() bfin_read16(PORTHIO) +#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO,val) +#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) +#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR,val) +#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) +#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET,val) +#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) +#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE,val) +#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) +#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA,val) +#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) +#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR,val) +#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) +#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET,val) +#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) +#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE,val) +#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) +#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB,val) +#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) +#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR,val) +#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) +#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET,val) +#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) +#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE,val) +#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) +#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR,val) +#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) +#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR,val) +#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) +#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE,val) +#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) +#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH,val) +#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) +#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN,val) + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR,val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR,val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL,val) +#define bfin_read_UART1_IER() bfin_read16(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER,val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH,val) +#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) +#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR,val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR,val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR,val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR,val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR,val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR,val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL,val) + +/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ +/* For Mailboxes 0-15 */ +#define bfin_read_CAN_MC1() bfin_read16(CAN_MC1) +#define bfin_write_CAN_MC1(val) bfin_write16(CAN_MC1,val) +#define bfin_read_CAN_MD1() bfin_read16(CAN_MD1) +#define bfin_write_CAN_MD1(val) bfin_write16(CAN_MD1,val) +#define bfin_read_CAN_TRS1() bfin_read16(CAN_TRS1) +#define bfin_write_CAN_TRS1(val) bfin_write16(CAN_TRS1,val) +#define bfin_read_CAN_TRR1() bfin_read16(CAN_TRR1) +#define bfin_write_CAN_TRR1(val) bfin_write16(CAN_TRR1,val) +#define bfin_read_CAN_TA1() bfin_read16(CAN_TA1) +#define bfin_write_CAN_TA1(val) bfin_write16(CAN_TA1,val) +#define bfin_read_CAN_AA1() bfin_read16(CAN_AA1) +#define bfin_write_CAN_AA1(val) bfin_write16(CAN_AA1,val) +#define bfin_read_CAN_RMP1() bfin_read16(CAN_RMP1) +#define bfin_write_CAN_RMP1(val) bfin_write16(CAN_RMP1,val) +#define bfin_read_CAN_RML1() bfin_read16(CAN_RML1) +#define bfin_write_CAN_RML1(val) bfin_write16(CAN_RML1,val) +#define bfin_read_CAN_MBTIF1() bfin_read16(CAN_MBTIF1) +#define bfin_write_CAN_MBTIF1(val) bfin_write16(CAN_MBTIF1,val) +#define bfin_read_CAN_MBRIF1() bfin_read16(CAN_MBRIF1) +#define bfin_write_CAN_MBRIF1(val) bfin_write16(CAN_MBRIF1,val) +#define bfin_read_CAN_MBIM1() bfin_read16(CAN_MBIM1) +#define bfin_write_CAN_MBIM1(val) bfin_write16(CAN_MBIM1,val) +#define bfin_read_CAN_RFH1() bfin_read16(CAN_RFH1) +#define bfin_write_CAN_RFH1(val) bfin_write16(CAN_RFH1,val) +#define bfin_read_CAN_OPSS1() bfin_read16(CAN_OPSS1) +#define bfin_write_CAN_OPSS1(val) bfin_write16(CAN_OPSS1,val) + +/* For Mailboxes 16-31 */ +#define bfin_read_CAN_MC2() bfin_read16(CAN_MC2) +#define bfin_write_CAN_MC2(val) bfin_write16(CAN_MC2,val) +#define bfin_read_CAN_MD2() bfin_read16(CAN_MD2) +#define bfin_write_CAN_MD2(val) bfin_write16(CAN_MD2,val) +#define bfin_read_CAN_TRS2() bfin_read16(CAN_TRS2) +#define bfin_write_CAN_TRS2(val) bfin_write16(CAN_TRS2,val) +#define bfin_read_CAN_TRR2() bfin_read16(CAN_TRR2) +#define bfin_write_CAN_TRR2(val) bfin_write16(CAN_TRR2,val) +#define bfin_read_CAN_TA2() bfin_read16(CAN_TA2) +#define bfin_write_CAN_TA2(val) bfin_write16(CAN_TA2,val) +#define bfin_read_CAN_AA2() bfin_read16(CAN_AA2) +#define bfin_write_CAN_AA2(val) bfin_write16(CAN_AA2,val) +#define bfin_read_CAN_RMP2() bfin_read16(CAN_RMP2) +#define bfin_write_CAN_RMP2(val) bfin_write16(CAN_RMP2,val) +#define bfin_read_CAN_RML2() bfin_read16(CAN_RML2) +#define bfin_write_CAN_RML2(val) bfin_write16(CAN_RML2,val) +#define bfin_read_CAN_MBTIF2() bfin_read16(CAN_MBTIF2) +#define bfin_write_CAN_MBTIF2(val) bfin_write16(CAN_MBTIF2,val) +#define bfin_read_CAN_MBRIF2() bfin_read16(CAN_MBRIF2) +#define bfin_write_CAN_MBRIF2(val) bfin_write16(CAN_MBRIF2,val) +#define bfin_read_CAN_MBIM2() bfin_read16(CAN_MBIM2) +#define bfin_write_CAN_MBIM2(val) bfin_write16(CAN_MBIM2,val) +#define bfin_read_CAN_RFH2() bfin_read16(CAN_RFH2) +#define bfin_write_CAN_RFH2(val) bfin_write16(CAN_RFH2,val) +#define bfin_read_CAN_OPSS2() bfin_read16(CAN_OPSS2) +#define bfin_write_CAN_OPSS2(val) bfin_write16(CAN_OPSS2,val) + +#define bfin_read_CAN_CLOCK() bfin_read16(CAN_CLOCK) +#define bfin_write_CAN_CLOCK(val) bfin_write16(CAN_CLOCK,val) +#define bfin_read_CAN_TIMING() bfin_read16(CAN_TIMING) +#define bfin_write_CAN_TIMING(val) bfin_write16(CAN_TIMING,val) +#define bfin_read_CAN_DEBUG() bfin_read16(CAN_DEBUG) +#define bfin_write_CAN_DEBUG(val) bfin_write16(CAN_DEBUG,val) +#define bfin_read_CAN_STATUS() bfin_read16(CAN_STATUS) +#define bfin_write_CAN_STATUS(val) bfin_write16(CAN_STATUS,val) +#define bfin_read_CAN_CEC() bfin_read16(CAN_CEC) +#define bfin_write_CAN_CEC(val) bfin_write16(CAN_CEC,val) +#define bfin_read_CAN_GIS() bfin_read16(CAN_GIS) +#define bfin_write_CAN_GIS(val) bfin_write16(CAN_GIS,val) +#define bfin_read_CAN_GIM() bfin_read16(CAN_GIM) +#define bfin_write_CAN_GIM(val) bfin_write16(CAN_GIM,val) +#define bfin_read_CAN_GIF() bfin_read16(CAN_GIF) +#define bfin_write_CAN_GIF(val) bfin_write16(CAN_GIF,val) +#define bfin_read_CAN_CONTROL() bfin_read16(CAN_CONTROL) +#define bfin_write_CAN_CONTROL(val) bfin_write16(CAN_CONTROL,val) +#define bfin_read_CAN_INTR() bfin_read16(CAN_INTR) +#define bfin_write_CAN_INTR(val) bfin_write16(CAN_INTR,val) +#define bfin_read_CAN_SFCMVER() bfin_read16(CAN_SFCMVER) +#define bfin_write_CAN_SFCMVER(val) bfin_write16(CAN_SFCMVER,val) +#define bfin_read_CAN_MBTD() bfin_read16(CAN_MBTD) +#define bfin_write_CAN_MBTD(val) bfin_write16(CAN_MBTD,val) +#define bfin_read_CAN_EWR() bfin_read16(CAN_EWR) +#define bfin_write_CAN_EWR(val) bfin_write16(CAN_EWR,val) +#define bfin_read_CAN_ESR() bfin_read16(CAN_ESR) +#define bfin_write_CAN_ESR(val) bfin_write16(CAN_ESR,val) +#define bfin_read_CAN_UCREG() bfin_read16(CAN_UCREG) +#define bfin_write_CAN_UCREG(val) bfin_write16(CAN_UCREG,val) +#define bfin_read_CAN_UCCNT() bfin_read16(CAN_UCCNT) +#define bfin_write_CAN_UCCNT(val) bfin_write16(CAN_UCCNT,val) +#define bfin_read_CAN_UCRC() bfin_read16(CAN_UCRC) +#define bfin_write_CAN_UCRC(val) bfin_write16(CAN_UCRC,val) +#define bfin_read_CAN_UCCNF() bfin_read16(CAN_UCCNF) +#define bfin_write_CAN_UCCNF(val) bfin_write16(CAN_UCCNF,val) +#define bfin_read_CAN_SFCMVER2() bfin_read16(CAN_SFCMVER2) +#define bfin_write_CAN_SFCMVER2(val) bfin_write16(CAN_SFCMVER2,val) + +/* Mailbox Acceptance Masks */ +#define bfin_read_CAN_AM00L() bfin_read16(CAN_AM00L) +#define bfin_write_CAN_AM00L(val) bfin_write16(CAN_AM00L,val) +#define bfin_read_CAN_AM00H() bfin_read16(CAN_AM00H) +#define bfin_write_CAN_AM00H(val) bfin_write16(CAN_AM00H,val) +#define bfin_read_CAN_AM01L() bfin_read16(CAN_AM01L) +#define bfin_write_CAN_AM01L(val) bfin_write16(CAN_AM01L,val) +#define bfin_read_CAN_AM01H() bfin_read16(CAN_AM01H) +#define bfin_write_CAN_AM01H(val) bfin_write16(CAN_AM01H,val) +#define bfin_read_CAN_AM02L() bfin_read16(CAN_AM02L) +#define bfin_write_CAN_AM02L(val) bfin_write16(CAN_AM02L,val) +#define bfin_read_CAN_AM02H() bfin_read16(CAN_AM02H) +#define bfin_write_CAN_AM02H(val) bfin_write16(CAN_AM02H,val) +#define bfin_read_CAN_AM03L() bfin_read16(CAN_AM03L) +#define bfin_write_CAN_AM03L(val) bfin_write16(CAN_AM03L,val) +#define bfin_read_CAN_AM03H() bfin_read16(CAN_AM03H) +#define bfin_write_CAN_AM03H(val) bfin_write16(CAN_AM03H,val) +#define bfin_read_CAN_AM04L() bfin_read16(CAN_AM04L) +#define bfin_write_CAN_AM04L(val) bfin_write16(CAN_AM04L,val) +#define bfin_read_CAN_AM04H() bfin_read16(CAN_AM04H) +#define bfin_write_CAN_AM04H(val) bfin_write16(CAN_AM04H,val) +#define bfin_read_CAN_AM05L() bfin_read16(CAN_AM05L) +#define bfin_write_CAN_AM05L(val) bfin_write16(CAN_AM05L,val) +#define bfin_read_CAN_AM05H() bfin_read16(CAN_AM05H) +#define bfin_write_CAN_AM05H(val) bfin_write16(CAN_AM05H,val) +#define bfin_read_CAN_AM06L() bfin_read16(CAN_AM06L) +#define bfin_write_CAN_AM06L(val) bfin_write16(CAN_AM06L,val) +#define bfin_read_CAN_AM06H() bfin_read16(CAN_AM06H) +#define bfin_write_CAN_AM06H(val) bfin_write16(CAN_AM06H,val) +#define bfin_read_CAN_AM07L() bfin_read16(CAN_AM07L) +#define bfin_write_CAN_AM07L(val) bfin_write16(CAN_AM07L,val) +#define bfin_read_CAN_AM07H() bfin_read16(CAN_AM07H) +#define bfin_write_CAN_AM07H(val) bfin_write16(CAN_AM07H,val) +#define bfin_read_CAN_AM08L() bfin_read16(CAN_AM08L) +#define bfin_write_CAN_AM08L(val) bfin_write16(CAN_AM08L,val) +#define bfin_read_CAN_AM08H() bfin_read16(CAN_AM08H) +#define bfin_write_CAN_AM08H(val) bfin_write16(CAN_AM08H,val) +#define bfin_read_CAN_AM09L() bfin_read16(CAN_AM09L) +#define bfin_write_CAN_AM09L(val) bfin_write16(CAN_AM09L,val) +#define bfin_read_CAN_AM09H() bfin_read16(CAN_AM09H) +#define bfin_write_CAN_AM09H(val) bfin_write16(CAN_AM09H,val) +#define bfin_read_CAN_AM10L() bfin_read16(CAN_AM10L) +#define bfin_write_CAN_AM10L(val) bfin_write16(CAN_AM10L,val) +#define bfin_read_CAN_AM10H() bfin_read16(CAN_AM10H) +#define bfin_write_CAN_AM10H(val) bfin_write16(CAN_AM10H,val) +#define bfin_read_CAN_AM11L() bfin_read16(CAN_AM11L) +#define bfin_write_CAN_AM11L(val) bfin_write16(CAN_AM11L,val) +#define bfin_read_CAN_AM11H() bfin_read16(CAN_AM11H) +#define bfin_write_CAN_AM11H(val) bfin_write16(CAN_AM11H,val) +#define bfin_read_CAN_AM12L() bfin_read16(CAN_AM12L) +#define bfin_write_CAN_AM12L(val) bfin_write16(CAN_AM12L,val) +#define bfin_read_CAN_AM12H() bfin_read16(CAN_AM12H) +#define bfin_write_CAN_AM12H(val) bfin_write16(CAN_AM12H,val) +#define bfin_read_CAN_AM13L() bfin_read16(CAN_AM13L) +#define bfin_write_CAN_AM13L(val) bfin_write16(CAN_AM13L,val) +#define bfin_read_CAN_AM13H() bfin_read16(CAN_AM13H) +#define bfin_write_CAN_AM13H(val) bfin_write16(CAN_AM13H,val) +#define bfin_read_CAN_AM14L() bfin_read16(CAN_AM14L) +#define bfin_write_CAN_AM14L(val) bfin_write16(CAN_AM14L,val) +#define bfin_read_CAN_AM14H() bfin_read16(CAN_AM14H) +#define bfin_write_CAN_AM14H(val) bfin_write16(CAN_AM14H,val) +#define bfin_read_CAN_AM15L() bfin_read16(CAN_AM15L) +#define bfin_write_CAN_AM15L(val) bfin_write16(CAN_AM15L,val) +#define bfin_read_CAN_AM15H() bfin_read16(CAN_AM15H) +#define bfin_write_CAN_AM15H(val) bfin_write16(CAN_AM15H,val) + +#define bfin_read_CAN_AM16L() bfin_read16(CAN_AM16L) +#define bfin_write_CAN_AM16L(val) bfin_write16(CAN_AM16L,val) +#define bfin_read_CAN_AM16H() bfin_read16(CAN_AM16H) +#define bfin_write_CAN_AM16H(val) bfin_write16(CAN_AM16H,val) +#define bfin_read_CAN_AM17L() bfin_read16(CAN_AM17L) +#define bfin_write_CAN_AM17L(val) bfin_write16(CAN_AM17L,val) +#define bfin_read_CAN_AM17H() bfin_read16(CAN_AM17H) +#define bfin_write_CAN_AM17H(val) bfin_write16(CAN_AM17H,val) +#define bfin_read_CAN_AM18L() bfin_read16(CAN_AM18L) +#define bfin_write_CAN_AM18L(val) bfin_write16(CAN_AM18L,val) +#define bfin_read_CAN_AM18H() bfin_read16(CAN_AM18H) +#define bfin_write_CAN_AM18H(val) bfin_write16(CAN_AM18H,val) +#define bfin_read_CAN_AM19L() bfin_read16(CAN_AM19L) +#define bfin_write_CAN_AM19L(val) bfin_write16(CAN_AM19L,val) +#define bfin_read_CAN_AM19H() bfin_read16(CAN_AM19H) +#define bfin_write_CAN_AM19H(val) bfin_write16(CAN_AM19H,val) +#define bfin_read_CAN_AM20L() bfin_read16(CAN_AM20L) +#define bfin_write_CAN_AM20L(val) bfin_write16(CAN_AM20L,val) +#define bfin_read_CAN_AM20H() bfin_read16(CAN_AM20H) +#define bfin_write_CAN_AM20H(val) bfin_write16(CAN_AM20H,val) +#define bfin_read_CAN_AM21L() bfin_read16(CAN_AM21L) +#define bfin_write_CAN_AM21L(val) bfin_write16(CAN_AM21L,val) +#define bfin_read_CAN_AM21H() bfin_read16(CAN_AM21H) +#define bfin_write_CAN_AM21H(val) bfin_write16(CAN_AM21H,val) +#define bfin_read_CAN_AM22L() bfin_read16(CAN_AM22L) +#define bfin_write_CAN_AM22L(val) bfin_write16(CAN_AM22L,val) +#define bfin_read_CAN_AM22H() bfin_read16(CAN_AM22H) +#define bfin_write_CAN_AM22H(val) bfin_write16(CAN_AM22H,val) +#define bfin_read_CAN_AM23L() bfin_read16(CAN_AM23L) +#define bfin_write_CAN_AM23L(val) bfin_write16(CAN_AM23L,val) +#define bfin_read_CAN_AM23H() bfin_read16(CAN_AM23H) +#define bfin_write_CAN_AM23H(val) bfin_write16(CAN_AM23H,val) +#define bfin_read_CAN_AM24L() bfin_read16(CAN_AM24L) +#define bfin_write_CAN_AM24L(val) bfin_write16(CAN_AM24L,val) +#define bfin_read_CAN_AM24H() bfin_read16(CAN_AM24H) +#define bfin_write_CAN_AM24H(val) bfin_write16(CAN_AM24H,val) +#define bfin_read_CAN_AM25L() bfin_read16(CAN_AM25L) +#define bfin_write_CAN_AM25L(val) bfin_write16(CAN_AM25L,val) +#define bfin_read_CAN_AM25H() bfin_read16(CAN_AM25H) +#define bfin_write_CAN_AM25H(val) bfin_write16(CAN_AM25H,val) +#define bfin_read_CAN_AM26L() bfin_read16(CAN_AM26L) +#define bfin_write_CAN_AM26L(val) bfin_write16(CAN_AM26L,val) +#define bfin_read_CAN_AM26H() bfin_read16(CAN_AM26H) +#define bfin_write_CAN_AM26H(val) bfin_write16(CAN_AM26H,val) +#define bfin_read_CAN_AM27L() bfin_read16(CAN_AM27L) +#define bfin_write_CAN_AM27L(val) bfin_write16(CAN_AM27L,val) +#define bfin_read_CAN_AM27H() bfin_read16(CAN_AM27H) +#define bfin_write_CAN_AM27H(val) bfin_write16(CAN_AM27H,val) +#define bfin_read_CAN_AM28L() bfin_read16(CAN_AM28L) +#define bfin_write_CAN_AM28L(val) bfin_write16(CAN_AM28L,val) +#define bfin_read_CAN_AM28H() bfin_read16(CAN_AM28H) +#define bfin_write_CAN_AM28H(val) bfin_write16(CAN_AM28H,val) +#define bfin_read_CAN_AM29L() bfin_read16(CAN_AM29L) +#define bfin_write_CAN_AM29L(val) bfin_write16(CAN_AM29L,val) +#define bfin_read_CAN_AM29H() bfin_read16(CAN_AM29H) +#define bfin_write_CAN_AM29H(val) bfin_write16(CAN_AM29H,val) +#define bfin_read_CAN_AM30L() bfin_read16(CAN_AM30L) +#define bfin_write_CAN_AM30L(val) bfin_write16(CAN_AM30L,val) +#define bfin_read_CAN_AM30H() bfin_read16(CAN_AM30H) +#define bfin_write_CAN_AM30H(val) bfin_write16(CAN_AM30H,val) +#define bfin_read_CAN_AM31L() bfin_read16(CAN_AM31L) +#define bfin_write_CAN_AM31L(val) bfin_write16(CAN_AM31L,val) +#define bfin_read_CAN_AM31H() bfin_read16(CAN_AM31H) +#define bfin_write_CAN_AM31H(val) bfin_write16(CAN_AM31H,val) + +/* CAN Acceptance Mask Area Macros */ +#define bfin_read_CAN_AM_L(x)() bfin_read16(CAN_AM_L(x)) +#define bfin_write_CAN_AM_L(x)(val) bfin_write16(CAN_AM_L(x),val) +#define bfin_read_CAN_AM_H(x)() bfin_read16(CAN_AM_H(x)) +#define bfin_write_CAN_AM_H(x)(val) bfin_write16(CAN_AM_H(x),val) + +/* Mailbox Registers */ +#define bfin_read_CAN_MB00_ID1() bfin_read16(CAN_MB00_ID1) +#define bfin_write_CAN_MB00_ID1(val) bfin_write16(CAN_MB00_ID1,val) +#define bfin_read_CAN_MB00_ID0() bfin_read16(CAN_MB00_ID0) +#define bfin_write_CAN_MB00_ID0(val) bfin_write16(CAN_MB00_ID0,val) +#define bfin_read_CAN_MB00_TIMESTAMP() bfin_read16(CAN_MB00_TIMESTAMP) +#define bfin_write_CAN_MB00_TIMESTAMP(val) bfin_write16(CAN_MB00_TIMESTAMP,val) +#define bfin_read_CAN_MB00_LENGTH() bfin_read16(CAN_MB00_LENGTH) +#define bfin_write_CAN_MB00_LENGTH(val) bfin_write16(CAN_MB00_LENGTH,val) +#define bfin_read_CAN_MB00_DATA3() bfin_read16(CAN_MB00_DATA3) +#define bfin_write_CAN_MB00_DATA3(val) bfin_write16(CAN_MB00_DATA3,val) +#define bfin_read_CAN_MB00_DATA2() bfin_read16(CAN_MB00_DATA2) +#define bfin_write_CAN_MB00_DATA2(val) bfin_write16(CAN_MB00_DATA2,val) +#define bfin_read_CAN_MB00_DATA1() bfin_read16(CAN_MB00_DATA1) +#define bfin_write_CAN_MB00_DATA1(val) bfin_write16(CAN_MB00_DATA1,val) +#define bfin_read_CAN_MB00_DATA0() bfin_read16(CAN_MB00_DATA0) +#define bfin_write_CAN_MB00_DATA0(val) bfin_write16(CAN_MB00_DATA0,val) + +#define bfin_read_CAN_MB01_ID1() bfin_read16(CAN_MB01_ID1) +#define bfin_write_CAN_MB01_ID1(val) bfin_write16(CAN_MB01_ID1,val) +#define bfin_read_CAN_MB01_ID0() bfin_read16(CAN_MB01_ID0) +#define bfin_write_CAN_MB01_ID0(val) bfin_write16(CAN_MB01_ID0,val) +#define bfin_read_CAN_MB01_TIMESTAMP() bfin_read16(CAN_MB01_TIMESTAMP) +#define bfin_write_CAN_MB01_TIMESTAMP(val) bfin_write16(CAN_MB01_TIMESTAMP,val) +#define bfin_read_CAN_MB01_LENGTH() bfin_read16(CAN_MB01_LENGTH) +#define bfin_write_CAN_MB01_LENGTH(val) bfin_write16(CAN_MB01_LENGTH,val) +#define bfin_read_CAN_MB01_DATA3() bfin_read16(CAN_MB01_DATA3) +#define bfin_write_CAN_MB01_DATA3(val) bfin_write16(CAN_MB01_DATA3,val) +#define bfin_read_CAN_MB01_DATA2() bfin_read16(CAN_MB01_DATA2) +#define bfin_write_CAN_MB01_DATA2(val) bfin_write16(CAN_MB01_DATA2,val) +#define bfin_read_CAN_MB01_DATA1() bfin_read16(CAN_MB01_DATA1) +#define bfin_write_CAN_MB01_DATA1(val) bfin_write16(CAN_MB01_DATA1,val) +#define bfin_read_CAN_MB01_DATA0() bfin_read16(CAN_MB01_DATA0) +#define bfin_write_CAN_MB01_DATA0(val) bfin_write16(CAN_MB01_DATA0,val) + +#define bfin_read_CAN_MB02_ID1() bfin_read16(CAN_MB02_ID1) +#define bfin_write_CAN_MB02_ID1(val) bfin_write16(CAN_MB02_ID1,val) +#define bfin_read_CAN_MB02_ID0() bfin_read16(CAN_MB02_ID0) +#define bfin_write_CAN_MB02_ID0(val) bfin_write16(CAN_MB02_ID0,val) +#define bfin_read_CAN_MB02_TIMESTAMP() bfin_read16(CAN_MB02_TIMESTAMP) +#define bfin_write_CAN_MB02_TIMESTAMP(val) bfin_write16(CAN_MB02_TIMESTAMP,val) +#define bfin_read_CAN_MB02_LENGTH() bfin_read16(CAN_MB02_LENGTH) +#define bfin_write_CAN_MB02_LENGTH(val) bfin_write16(CAN_MB02_LENGTH,val) +#define bfin_read_CAN_MB02_DATA3() bfin_read16(CAN_MB02_DATA3) +#define bfin_write_CAN_MB02_DATA3(val) bfin_write16(CAN_MB02_DATA3,val) +#define bfin_read_CAN_MB02_DATA2() bfin_read16(CAN_MB02_DATA2) +#define bfin_write_CAN_MB02_DATA2(val) bfin_write16(CAN_MB02_DATA2,val) +#define bfin_read_CAN_MB02_DATA1() bfin_read16(CAN_MB02_DATA1) +#define bfin_write_CAN_MB02_DATA1(val) bfin_write16(CAN_MB02_DATA1,val) +#define bfin_read_CAN_MB02_DATA0() bfin_read16(CAN_MB02_DATA0) +#define bfin_write_CAN_MB02_DATA0(val) bfin_write16(CAN_MB02_DATA0,val) + +#define bfin_read_CAN_MB03_ID1() bfin_read16(CAN_MB03_ID1) +#define bfin_write_CAN_MB03_ID1(val) bfin_write16(CAN_MB03_ID1,val) +#define bfin_read_CAN_MB03_ID0() bfin_read16(CAN_MB03_ID0) +#define bfin_write_CAN_MB03_ID0(val) bfin_write16(CAN_MB03_ID0,val) +#define bfin_read_CAN_MB03_TIMESTAMP() bfin_read16(CAN_MB03_TIMESTAMP) +#define bfin_write_CAN_MB03_TIMESTAMP(val) bfin_write16(CAN_MB03_TIMESTAMP,val) +#define bfin_read_CAN_MB03_LENGTH() bfin_read16(CAN_MB03_LENGTH) +#define bfin_write_CAN_MB03_LENGTH(val) bfin_write16(CAN_MB03_LENGTH,val) +#define bfin_read_CAN_MB03_DATA3() bfin_read16(CAN_MB03_DATA3) +#define bfin_write_CAN_MB03_DATA3(val) bfin_write16(CAN_MB03_DATA3,val) +#define bfin_read_CAN_MB03_DATA2() bfin_read16(CAN_MB03_DATA2) +#define bfin_write_CAN_MB03_DATA2(val) bfin_write16(CAN_MB03_DATA2,val) +#define bfin_read_CAN_MB03_DATA1() bfin_read16(CAN_MB03_DATA1) +#define bfin_write_CAN_MB03_DATA1(val) bfin_write16(CAN_MB03_DATA1,val) +#define bfin_read_CAN_MB03_DATA0() bfin_read16(CAN_MB03_DATA0) +#define bfin_write_CAN_MB03_DATA0(val) bfin_write16(CAN_MB03_DATA0,val) + +#define bfin_read_CAN_MB04_ID1() bfin_read16(CAN_MB04_ID1) +#define bfin_write_CAN_MB04_ID1(val) bfin_write16(CAN_MB04_ID1,val) +#define bfin_read_CAN_MB04_ID0() bfin_read16(CAN_MB04_ID0) +#define bfin_write_CAN_MB04_ID0(val) bfin_write16(CAN_MB04_ID0,val) +#define bfin_read_CAN_MB04_TIMESTAMP() bfin_read16(CAN_MB04_TIMESTAMP) +#define bfin_write_CAN_MB04_TIMESTAMP(val) bfin_write16(CAN_MB04_TIMESTAMP,val) +#define bfin_read_CAN_MB04_LENGTH() bfin_read16(CAN_MB04_LENGTH) +#define bfin_write_CAN_MB04_LENGTH(val) bfin_write16(CAN_MB04_LENGTH,val) +#define bfin_read_CAN_MB04_DATA3() bfin_read16(CAN_MB04_DATA3) +#define bfin_write_CAN_MB04_DATA3(val) bfin_write16(CAN_MB04_DATA3,val) +#define bfin_read_CAN_MB04_DATA2() bfin_read16(CAN_MB04_DATA2) +#define bfin_write_CAN_MB04_DATA2(val) bfin_write16(CAN_MB04_DATA2,val) +#define bfin_read_CAN_MB04_DATA1() bfin_read16(CAN_MB04_DATA1) +#define bfin_write_CAN_MB04_DATA1(val) bfin_write16(CAN_MB04_DATA1,val) +#define bfin_read_CAN_MB04_DATA0() bfin_read16(CAN_MB04_DATA0) +#define bfin_write_CAN_MB04_DATA0(val) bfin_write16(CAN_MB04_DATA0,val) + +#define bfin_read_CAN_MB05_ID1() bfin_read16(CAN_MB05_ID1) +#define bfin_write_CAN_MB05_ID1(val) bfin_write16(CAN_MB05_ID1,val) +#define bfin_read_CAN_MB05_ID0() bfin_read16(CAN_MB05_ID0) +#define bfin_write_CAN_MB05_ID0(val) bfin_write16(CAN_MB05_ID0,val) +#define bfin_read_CAN_MB05_TIMESTAMP() bfin_read16(CAN_MB05_TIMESTAMP) +#define bfin_write_CAN_MB05_TIMESTAMP(val) bfin_write16(CAN_MB05_TIMESTAMP,val) +#define bfin_read_CAN_MB05_LENGTH() bfin_read16(CAN_MB05_LENGTH) +#define bfin_write_CAN_MB05_LENGTH(val) bfin_write16(CAN_MB05_LENGTH,val) +#define bfin_read_CAN_MB05_DATA3() bfin_read16(CAN_MB05_DATA3) +#define bfin_write_CAN_MB05_DATA3(val) bfin_write16(CAN_MB05_DATA3,val) +#define bfin_read_CAN_MB05_DATA2() bfin_read16(CAN_MB05_DATA2) +#define bfin_write_CAN_MB05_DATA2(val) bfin_write16(CAN_MB05_DATA2,val) +#define bfin_read_CAN_MB05_DATA1() bfin_read16(CAN_MB05_DATA1) +#define bfin_write_CAN_MB05_DATA1(val) bfin_write16(CAN_MB05_DATA1,val) +#define bfin_read_CAN_MB05_DATA0() bfin_read16(CAN_MB05_DATA0) +#define bfin_write_CAN_MB05_DATA0(val) bfin_write16(CAN_MB05_DATA0,val) + +#define bfin_read_CAN_MB06_ID1() bfin_read16(CAN_MB06_ID1) +#define bfin_write_CAN_MB06_ID1(val) bfin_write16(CAN_MB06_ID1,val) +#define bfin_read_CAN_MB06_ID0() bfin_read16(CAN_MB06_ID0) +#define bfin_write_CAN_MB06_ID0(val) bfin_write16(CAN_MB06_ID0,val) +#define bfin_read_CAN_MB06_TIMESTAMP() bfin_read16(CAN_MB06_TIMESTAMP) +#define bfin_write_CAN_MB06_TIMESTAMP(val) bfin_write16(CAN_MB06_TIMESTAMP,val) +#define bfin_read_CAN_MB06_LENGTH() bfin_read16(CAN_MB06_LENGTH) +#define bfin_write_CAN_MB06_LENGTH(val) bfin_write16(CAN_MB06_LENGTH,val) +#define bfin_read_CAN_MB06_DATA3() bfin_read16(CAN_MB06_DATA3) +#define bfin_write_CAN_MB06_DATA3(val) bfin_write16(CAN_MB06_DATA3,val) +#define bfin_read_CAN_MB06_DATA2() bfin_read16(CAN_MB06_DATA2) +#define bfin_write_CAN_MB06_DATA2(val) bfin_write16(CAN_MB06_DATA2,val) +#define bfin_read_CAN_MB06_DATA1() bfin_read16(CAN_MB06_DATA1) +#define bfin_write_CAN_MB06_DATA1(val) bfin_write16(CAN_MB06_DATA1,val) +#define bfin_read_CAN_MB06_DATA0() bfin_read16(CAN_MB06_DATA0) +#define bfin_write_CAN_MB06_DATA0(val) bfin_write16(CAN_MB06_DATA0,val) + +#define bfin_read_CAN_MB07_ID1() bfin_read16(CAN_MB07_ID1) +#define bfin_write_CAN_MB07_ID1(val) bfin_write16(CAN_MB07_ID1,val) +#define bfin_read_CAN_MB07_ID0() bfin_read16(CAN_MB07_ID0) +#define bfin_write_CAN_MB07_ID0(val) bfin_write16(CAN_MB07_ID0,val) +#define bfin_read_CAN_MB07_TIMESTAMP() bfin_read16(CAN_MB07_TIMESTAMP) +#define bfin_write_CAN_MB07_TIMESTAMP(val) bfin_write16(CAN_MB07_TIMESTAMP,val) +#define bfin_read_CAN_MB07_LENGTH() bfin_read16(CAN_MB07_LENGTH) +#define bfin_write_CAN_MB07_LENGTH(val) bfin_write16(CAN_MB07_LENGTH,val) +#define bfin_read_CAN_MB07_DATA3() bfin_read16(CAN_MB07_DATA3) +#define bfin_write_CAN_MB07_DATA3(val) bfin_write16(CAN_MB07_DATA3,val) +#define bfin_read_CAN_MB07_DATA2() bfin_read16(CAN_MB07_DATA2) +#define bfin_write_CAN_MB07_DATA2(val) bfin_write16(CAN_MB07_DATA2,val) +#define bfin_read_CAN_MB07_DATA1() bfin_read16(CAN_MB07_DATA1) +#define bfin_write_CAN_MB07_DATA1(val) bfin_write16(CAN_MB07_DATA1,val) +#define bfin_read_CAN_MB07_DATA0() bfin_read16(CAN_MB07_DATA0) +#define bfin_write_CAN_MB07_DATA0(val) bfin_write16(CAN_MB07_DATA0,val) + +#define bfin_read_CAN_MB08_ID1() bfin_read16(CAN_MB08_ID1) +#define bfin_write_CAN_MB08_ID1(val) bfin_write16(CAN_MB08_ID1,val) +#define bfin_read_CAN_MB08_ID0() bfin_read16(CAN_MB08_ID0) +#define bfin_write_CAN_MB08_ID0(val) bfin_write16(CAN_MB08_ID0,val) +#define bfin_read_CAN_MB08_TIMESTAMP() bfin_read16(CAN_MB08_TIMESTAMP) +#define bfin_write_CAN_MB08_TIMESTAMP(val) bfin_write16(CAN_MB08_TIMESTAMP,val) +#define bfin_read_CAN_MB08_LENGTH() bfin_read16(CAN_MB08_LENGTH) +#define bfin_write_CAN_MB08_LENGTH(val) bfin_write16(CAN_MB08_LENGTH,val) +#define bfin_read_CAN_MB08_DATA3() bfin_read16(CAN_MB08_DATA3) +#define bfin_write_CAN_MB08_DATA3(val) bfin_write16(CAN_MB08_DATA3,val) +#define bfin_read_CAN_MB08_DATA2() bfin_read16(CAN_MB08_DATA2) +#define bfin_write_CAN_MB08_DATA2(val) bfin_write16(CAN_MB08_DATA2,val) +#define bfin_read_CAN_MB08_DATA1() bfin_read16(CAN_MB08_DATA1) +#define bfin_write_CAN_MB08_DATA1(val) bfin_write16(CAN_MB08_DATA1,val) +#define bfin_read_CAN_MB08_DATA0() bfin_read16(CAN_MB08_DATA0) +#define bfin_write_CAN_MB08_DATA0(val) bfin_write16(CAN_MB08_DATA0,val) + +#define bfin_read_CAN_MB09_ID1() bfin_read16(CAN_MB09_ID1) +#define bfin_write_CAN_MB09_ID1(val) bfin_write16(CAN_MB09_ID1,val) +#define bfin_read_CAN_MB09_ID0() bfin_read16(CAN_MB09_ID0) +#define bfin_write_CAN_MB09_ID0(val) bfin_write16(CAN_MB09_ID0,val) +#define bfin_read_CAN_MB09_TIMESTAMP() bfin_read16(CAN_MB09_TIMESTAMP) +#define bfin_write_CAN_MB09_TIMESTAMP(val) bfin_write16(CAN_MB09_TIMESTAMP,val) +#define bfin_read_CAN_MB09_LENGTH() bfin_read16(CAN_MB09_LENGTH) +#define bfin_write_CAN_MB09_LENGTH(val) bfin_write16(CAN_MB09_LENGTH,val) +#define bfin_read_CAN_MB09_DATA3() bfin_read16(CAN_MB09_DATA3) +#define bfin_write_CAN_MB09_DATA3(val) bfin_write16(CAN_MB09_DATA3,val) +#define bfin_read_CAN_MB09_DATA2() bfin_read16(CAN_MB09_DATA2) +#define bfin_write_CAN_MB09_DATA2(val) bfin_write16(CAN_MB09_DATA2,val) +#define bfin_read_CAN_MB09_DATA1() bfin_read16(CAN_MB09_DATA1) +#define bfin_write_CAN_MB09_DATA1(val) bfin_write16(CAN_MB09_DATA1,val) +#define bfin_read_CAN_MB09_DATA0() bfin_read16(CAN_MB09_DATA0) +#define bfin_write_CAN_MB09_DATA0(val) bfin_write16(CAN_MB09_DATA0,val) + +#define bfin_read_CAN_MB10_ID1() bfin_read16(CAN_MB10_ID1) +#define bfin_write_CAN_MB10_ID1(val) bfin_write16(CAN_MB10_ID1,val) +#define bfin_read_CAN_MB10_ID0() bfin_read16(CAN_MB10_ID0) +#define bfin_write_CAN_MB10_ID0(val) bfin_write16(CAN_MB10_ID0,val) +#define bfin_read_CAN_MB10_TIMESTAMP() bfin_read16(CAN_MB10_TIMESTAMP) +#define bfin_write_CAN_MB10_TIMESTAMP(val) bfin_write16(CAN_MB10_TIMESTAMP,val) +#define bfin_read_CAN_MB10_LENGTH() bfin_read16(CAN_MB10_LENGTH) +#define bfin_write_CAN_MB10_LENGTH(val) bfin_write16(CAN_MB10_LENGTH,val) +#define bfin_read_CAN_MB10_DATA3() bfin_read16(CAN_MB10_DATA3) +#define bfin_write_CAN_MB10_DATA3(val) bfin_write16(CAN_MB10_DATA3,val) +#define bfin_read_CAN_MB10_DATA2() bfin_read16(CAN_MB10_DATA2) +#define bfin_write_CAN_MB10_DATA2(val) bfin_write16(CAN_MB10_DATA2,val) +#define bfin_read_CAN_MB10_DATA1() bfin_read16(CAN_MB10_DATA1) +#define bfin_write_CAN_MB10_DATA1(val) bfin_write16(CAN_MB10_DATA1,val) +#define bfin_read_CAN_MB10_DATA0() bfin_read16(CAN_MB10_DATA0) +#define bfin_write_CAN_MB10_DATA0(val) bfin_write16(CAN_MB10_DATA0,val) + +#define bfin_read_CAN_MB11_ID1() bfin_read16(CAN_MB11_ID1) +#define bfin_write_CAN_MB11_ID1(val) bfin_write16(CAN_MB11_ID1,val) +#define bfin_read_CAN_MB11_ID0() bfin_read16(CAN_MB11_ID0) +#define bfin_write_CAN_MB11_ID0(val) bfin_write16(CAN_MB11_ID0,val) +#define bfin_read_CAN_MB11_TIMESTAMP() bfin_read16(CAN_MB11_TIMESTAMP) +#define bfin_write_CAN_MB11_TIMESTAMP(val) bfin_write16(CAN_MB11_TIMESTAMP,val) +#define bfin_read_CAN_MB11_LENGTH() bfin_read16(CAN_MB11_LENGTH) +#define bfin_write_CAN_MB11_LENGTH(val) bfin_write16(CAN_MB11_LENGTH,val) +#define bfin_read_CAN_MB11_DATA3() bfin_read16(CAN_MB11_DATA3) +#define bfin_write_CAN_MB11_DATA3(val) bfin_write16(CAN_MB11_DATA3,val) +#define bfin_read_CAN_MB11_DATA2() bfin_read16(CAN_MB11_DATA2) +#define bfin_write_CAN_MB11_DATA2(val) bfin_write16(CAN_MB11_DATA2,val) +#define bfin_read_CAN_MB11_DATA1() bfin_read16(CAN_MB11_DATA1) +#define bfin_write_CAN_MB11_DATA1(val) bfin_write16(CAN_MB11_DATA1,val) +#define bfin_read_CAN_MB11_DATA0() bfin_read16(CAN_MB11_DATA0) +#define bfin_write_CAN_MB11_DATA0(val) bfin_write16(CAN_MB11_DATA0,val) + +#define bfin_read_CAN_MB12_ID1() bfin_read16(CAN_MB12_ID1) +#define bfin_write_CAN_MB12_ID1(val) bfin_write16(CAN_MB12_ID1,val) +#define bfin_read_CAN_MB12_ID0() bfin_read16(CAN_MB12_ID0) +#define bfin_write_CAN_MB12_ID0(val) bfin_write16(CAN_MB12_ID0,val) +#define bfin_read_CAN_MB12_TIMESTAMP() bfin_read16(CAN_MB12_TIMESTAMP) +#define bfin_write_CAN_MB12_TIMESTAMP(val) bfin_write16(CAN_MB12_TIMESTAMP,val) +#define bfin_read_CAN_MB12_LENGTH() bfin_read16(CAN_MB12_LENGTH) +#define bfin_write_CAN_MB12_LENGTH(val) bfin_write16(CAN_MB12_LENGTH,val) +#define bfin_read_CAN_MB12_DATA3() bfin_read16(CAN_MB12_DATA3) +#define bfin_write_CAN_MB12_DATA3(val) bfin_write16(CAN_MB12_DATA3,val) +#define bfin_read_CAN_MB12_DATA2() bfin_read16(CAN_MB12_DATA2) +#define bfin_write_CAN_MB12_DATA2(val) bfin_write16(CAN_MB12_DATA2,val) +#define bfin_read_CAN_MB12_DATA1() bfin_read16(CAN_MB12_DATA1) +#define bfin_write_CAN_MB12_DATA1(val) bfin_write16(CAN_MB12_DATA1,val) +#define bfin_read_CAN_MB12_DATA0() bfin_read16(CAN_MB12_DATA0) +#define bfin_write_CAN_MB12_DATA0(val) bfin_write16(CAN_MB12_DATA0,val) + +#define bfin_read_CAN_MB13_ID1() bfin_read16(CAN_MB13_ID1) +#define bfin_write_CAN_MB13_ID1(val) bfin_write16(CAN_MB13_ID1,val) +#define bfin_read_CAN_MB13_ID0() bfin_read16(CAN_MB13_ID0) +#define bfin_write_CAN_MB13_ID0(val) bfin_write16(CAN_MB13_ID0,val) +#define bfin_read_CAN_MB13_TIMESTAMP() bfin_read16(CAN_MB13_TIMESTAMP) +#define bfin_write_CAN_MB13_TIMESTAMP(val) bfin_write16(CAN_MB13_TIMESTAMP,val) +#define bfin_read_CAN_MB13_LENGTH() bfin_read16(CAN_MB13_LENGTH) +#define bfin_write_CAN_MB13_LENGTH(val) bfin_write16(CAN_MB13_LENGTH,val) +#define bfin_read_CAN_MB13_DATA3() bfin_read16(CAN_MB13_DATA3) +#define bfin_write_CAN_MB13_DATA3(val) bfin_write16(CAN_MB13_DATA3,val) +#define bfin_read_CAN_MB13_DATA2() bfin_read16(CAN_MB13_DATA2) +#define bfin_write_CAN_MB13_DATA2(val) bfin_write16(CAN_MB13_DATA2,val) +#define bfin_read_CAN_MB13_DATA1() bfin_read16(CAN_MB13_DATA1) +#define bfin_write_CAN_MB13_DATA1(val) bfin_write16(CAN_MB13_DATA1,val) +#define bfin_read_CAN_MB13_DATA0() bfin_read16(CAN_MB13_DATA0) +#define bfin_write_CAN_MB13_DATA0(val) bfin_write16(CAN_MB13_DATA0,val) + +#define bfin_read_CAN_MB14_ID1() bfin_read16(CAN_MB14_ID1) +#define bfin_write_CAN_MB14_ID1(val) bfin_write16(CAN_MB14_ID1,val) +#define bfin_read_CAN_MB14_ID0() bfin_read16(CAN_MB14_ID0) +#define bfin_write_CAN_MB14_ID0(val) bfin_write16(CAN_MB14_ID0,val) +#define bfin_read_CAN_MB14_TIMESTAMP() bfin_read16(CAN_MB14_TIMESTAMP) +#define bfin_write_CAN_MB14_TIMESTAMP(val) bfin_write16(CAN_MB14_TIMESTAMP,val) +#define bfin_read_CAN_MB14_LENGTH() bfin_read16(CAN_MB14_LENGTH) +#define bfin_write_CAN_MB14_LENGTH(val) bfin_write16(CAN_MB14_LENGTH,val) +#define bfin_read_CAN_MB14_DATA3() bfin_read16(CAN_MB14_DATA3) +#define bfin_write_CAN_MB14_DATA3(val) bfin_write16(CAN_MB14_DATA3,val) +#define bfin_read_CAN_MB14_DATA2() bfin_read16(CAN_MB14_DATA2) +#define bfin_write_CAN_MB14_DATA2(val) bfin_write16(CAN_MB14_DATA2,val) +#define bfin_read_CAN_MB14_DATA1() bfin_read16(CAN_MB14_DATA1) +#define bfin_write_CAN_MB14_DATA1(val) bfin_write16(CAN_MB14_DATA1,val) +#define bfin_read_CAN_MB14_DATA0() bfin_read16(CAN_MB14_DATA0) +#define bfin_write_CAN_MB14_DATA0(val) bfin_write16(CAN_MB14_DATA0,val) + +#define bfin_read_CAN_MB15_ID1() bfin_read16(CAN_MB15_ID1) +#define bfin_write_CAN_MB15_ID1(val) bfin_write16(CAN_MB15_ID1,val) +#define bfin_read_CAN_MB15_ID0() bfin_read16(CAN_MB15_ID0) +#define bfin_write_CAN_MB15_ID0(val) bfin_write16(CAN_MB15_ID0,val) +#define bfin_read_CAN_MB15_TIMESTAMP() bfin_read16(CAN_MB15_TIMESTAMP) +#define bfin_write_CAN_MB15_TIMESTAMP(val) bfin_write16(CAN_MB15_TIMESTAMP,val) +#define bfin_read_CAN_MB15_LENGTH() bfin_read16(CAN_MB15_LENGTH) +#define bfin_write_CAN_MB15_LENGTH(val) bfin_write16(CAN_MB15_LENGTH,val) +#define bfin_read_CAN_MB15_DATA3() bfin_read16(CAN_MB15_DATA3) +#define bfin_write_CAN_MB15_DATA3(val) bfin_write16(CAN_MB15_DATA3,val) +#define bfin_read_CAN_MB15_DATA2() bfin_read16(CAN_MB15_DATA2) +#define bfin_write_CAN_MB15_DATA2(val) bfin_write16(CAN_MB15_DATA2,val) +#define bfin_read_CAN_MB15_DATA1() bfin_read16(CAN_MB15_DATA1) +#define bfin_write_CAN_MB15_DATA1(val) bfin_write16(CAN_MB15_DATA1,val) +#define bfin_read_CAN_MB15_DATA0() bfin_read16(CAN_MB15_DATA0) +#define bfin_write_CAN_MB15_DATA0(val) bfin_write16(CAN_MB15_DATA0,val) + +#define bfin_read_CAN_MB16_ID1() bfin_read16(CAN_MB16_ID1) +#define bfin_write_CAN_MB16_ID1(val) bfin_write16(CAN_MB16_ID1,val) +#define bfin_read_CAN_MB16_ID0() bfin_read16(CAN_MB16_ID0) +#define bfin_write_CAN_MB16_ID0(val) bfin_write16(CAN_MB16_ID0,val) +#define bfin_read_CAN_MB16_TIMESTAMP() bfin_read16(CAN_MB16_TIMESTAMP) +#define bfin_write_CAN_MB16_TIMESTAMP(val) bfin_write16(CAN_MB16_TIMESTAMP,val) +#define bfin_read_CAN_MB16_LENGTH() bfin_read16(CAN_MB16_LENGTH) +#define bfin_write_CAN_MB16_LENGTH(val) bfin_write16(CAN_MB16_LENGTH,val) +#define bfin_read_CAN_MB16_DATA3() bfin_read16(CAN_MB16_DATA3) +#define bfin_write_CAN_MB16_DATA3(val) bfin_write16(CAN_MB16_DATA3,val) +#define bfin_read_CAN_MB16_DATA2() bfin_read16(CAN_MB16_DATA2) +#define bfin_write_CAN_MB16_DATA2(val) bfin_write16(CAN_MB16_DATA2,val) +#define bfin_read_CAN_MB16_DATA1() bfin_read16(CAN_MB16_DATA1) +#define bfin_write_CAN_MB16_DATA1(val) bfin_write16(CAN_MB16_DATA1,val) +#define bfin_read_CAN_MB16_DATA0() bfin_read16(CAN_MB16_DATA0) +#define bfin_write_CAN_MB16_DATA0(val) bfin_write16(CAN_MB16_DATA0,val) + +#define bfin_read_CAN_MB17_ID1() bfin_read16(CAN_MB17_ID1) +#define bfin_write_CAN_MB17_ID1(val) bfin_write16(CAN_MB17_ID1,val) +#define bfin_read_CAN_MB17_ID0() bfin_read16(CAN_MB17_ID0) +#define bfin_write_CAN_MB17_ID0(val) bfin_write16(CAN_MB17_ID0,val) +#define bfin_read_CAN_MB17_TIMESTAMP() bfin_read16(CAN_MB17_TIMESTAMP) +#define bfin_write_CAN_MB17_TIMESTAMP(val) bfin_write16(CAN_MB17_TIMESTAMP,val) +#define bfin_read_CAN_MB17_LENGTH() bfin_read16(CAN_MB17_LENGTH) +#define bfin_write_CAN_MB17_LENGTH(val) bfin_write16(CAN_MB17_LENGTH,val) +#define bfin_read_CAN_MB17_DATA3() bfin_read16(CAN_MB17_DATA3) +#define bfin_write_CAN_MB17_DATA3(val) bfin_write16(CAN_MB17_DATA3,val) +#define bfin_read_CAN_MB17_DATA2() bfin_read16(CAN_MB17_DATA2) +#define bfin_write_CAN_MB17_DATA2(val) bfin_write16(CAN_MB17_DATA2,val) +#define bfin_read_CAN_MB17_DATA1() bfin_read16(CAN_MB17_DATA1) +#define bfin_write_CAN_MB17_DATA1(val) bfin_write16(CAN_MB17_DATA1,val) +#define bfin_read_CAN_MB17_DATA0() bfin_read16(CAN_MB17_DATA0) +#define bfin_write_CAN_MB17_DATA0(val) bfin_write16(CAN_MB17_DATA0,val) + +#define bfin_read_CAN_MB18_ID1() bfin_read16(CAN_MB18_ID1) +#define bfin_write_CAN_MB18_ID1(val) bfin_write16(CAN_MB18_ID1,val) +#define bfin_read_CAN_MB18_ID0() bfin_read16(CAN_MB18_ID0) +#define bfin_write_CAN_MB18_ID0(val) bfin_write16(CAN_MB18_ID0,val) +#define bfin_read_CAN_MB18_TIMESTAMP() bfin_read16(CAN_MB18_TIMESTAMP) +#define bfin_write_CAN_MB18_TIMESTAMP(val) bfin_write16(CAN_MB18_TIMESTAMP,val) +#define bfin_read_CAN_MB18_LENGTH() bfin_read16(CAN_MB18_LENGTH) +#define bfin_write_CAN_MB18_LENGTH(val) bfin_write16(CAN_MB18_LENGTH,val) +#define bfin_read_CAN_MB18_DATA3() bfin_read16(CAN_MB18_DATA3) +#define bfin_write_CAN_MB18_DATA3(val) bfin_write16(CAN_MB18_DATA3,val) +#define bfin_read_CAN_MB18_DATA2() bfin_read16(CAN_MB18_DATA2) +#define bfin_write_CAN_MB18_DATA2(val) bfin_write16(CAN_MB18_DATA2,val) +#define bfin_read_CAN_MB18_DATA1() bfin_read16(CAN_MB18_DATA1) +#define bfin_write_CAN_MB18_DATA1(val) bfin_write16(CAN_MB18_DATA1,val) +#define bfin_read_CAN_MB18_DATA0() bfin_read16(CAN_MB18_DATA0) +#define bfin_write_CAN_MB18_DATA0(val) bfin_write16(CAN_MB18_DATA0,val) + +#define bfin_read_CAN_MB19_ID1() bfin_read16(CAN_MB19_ID1) +#define bfin_write_CAN_MB19_ID1(val) bfin_write16(CAN_MB19_ID1,val) +#define bfin_read_CAN_MB19_ID0() bfin_read16(CAN_MB19_ID0) +#define bfin_write_CAN_MB19_ID0(val) bfin_write16(CAN_MB19_ID0,val) +#define bfin_read_CAN_MB19_TIMESTAMP() bfin_read16(CAN_MB19_TIMESTAMP) +#define bfin_write_CAN_MB19_TIMESTAMP(val) bfin_write16(CAN_MB19_TIMESTAMP,val) +#define bfin_read_CAN_MB19_LENGTH() bfin_read16(CAN_MB19_LENGTH) +#define bfin_write_CAN_MB19_LENGTH(val) bfin_write16(CAN_MB19_LENGTH,val) +#define bfin_read_CAN_MB19_DATA3() bfin_read16(CAN_MB19_DATA3) +#define bfin_write_CAN_MB19_DATA3(val) bfin_write16(CAN_MB19_DATA3,val) +#define bfin_read_CAN_MB19_DATA2() bfin_read16(CAN_MB19_DATA2) +#define bfin_write_CAN_MB19_DATA2(val) bfin_write16(CAN_MB19_DATA2,val) +#define bfin_read_CAN_MB19_DATA1() bfin_read16(CAN_MB19_DATA1) +#define bfin_write_CAN_MB19_DATA1(val) bfin_write16(CAN_MB19_DATA1,val) +#define bfin_read_CAN_MB19_DATA0() bfin_read16(CAN_MB19_DATA0) +#define bfin_write_CAN_MB19_DATA0(val) bfin_write16(CAN_MB19_DATA0,val) + +#define bfin_read_CAN_MB20_ID1() bfin_read16(CAN_MB20_ID1) +#define bfin_write_CAN_MB20_ID1(val) bfin_write16(CAN_MB20_ID1,val) +#define bfin_read_CAN_MB20_ID0() bfin_read16(CAN_MB20_ID0) +#define bfin_write_CAN_MB20_ID0(val) bfin_write16(CAN_MB20_ID0,val) +#define bfin_read_CAN_MB20_TIMESTAMP() bfin_read16(CAN_MB20_TIMESTAMP) +#define bfin_write_CAN_MB20_TIMESTAMP(val) bfin_write16(CAN_MB20_TIMESTAMP,val) +#define bfin_read_CAN_MB20_LENGTH() bfin_read16(CAN_MB20_LENGTH) +#define bfin_write_CAN_MB20_LENGTH(val) bfin_write16(CAN_MB20_LENGTH,val) +#define bfin_read_CAN_MB20_DATA3() bfin_read16(CAN_MB20_DATA3) +#define bfin_write_CAN_MB20_DATA3(val) bfin_write16(CAN_MB20_DATA3,val) +#define bfin_read_CAN_MB20_DATA2() bfin_read16(CAN_MB20_DATA2) +#define bfin_write_CAN_MB20_DATA2(val) bfin_write16(CAN_MB20_DATA2,val) +#define bfin_read_CAN_MB20_DATA1() bfin_read16(CAN_MB20_DATA1) +#define bfin_write_CAN_MB20_DATA1(val) bfin_write16(CAN_MB20_DATA1,val) +#define bfin_read_CAN_MB20_DATA0() bfin_read16(CAN_MB20_DATA0) +#define bfin_write_CAN_MB20_DATA0(val) bfin_write16(CAN_MB20_DATA0,val) + +#define bfin_read_CAN_MB21_ID1() bfin_read16(CAN_MB21_ID1) +#define bfin_write_CAN_MB21_ID1(val) bfin_write16(CAN_MB21_ID1,val) +#define bfin_read_CAN_MB21_ID0() bfin_read16(CAN_MB21_ID0) +#define bfin_write_CAN_MB21_ID0(val) bfin_write16(CAN_MB21_ID0,val) +#define bfin_read_CAN_MB21_TIMESTAMP() bfin_read16(CAN_MB21_TIMESTAMP) +#define bfin_write_CAN_MB21_TIMESTAMP(val) bfin_write16(CAN_MB21_TIMESTAMP,val) +#define bfin_read_CAN_MB21_LENGTH() bfin_read16(CAN_MB21_LENGTH) +#define bfin_write_CAN_MB21_LENGTH(val) bfin_write16(CAN_MB21_LENGTH,val) +#define bfin_read_CAN_MB21_DATA3() bfin_read16(CAN_MB21_DATA3) +#define bfin_write_CAN_MB21_DATA3(val) bfin_write16(CAN_MB21_DATA3,val) +#define bfin_read_CAN_MB21_DATA2() bfin_read16(CAN_MB21_DATA2) +#define bfin_write_CAN_MB21_DATA2(val) bfin_write16(CAN_MB21_DATA2,val) +#define bfin_read_CAN_MB21_DATA1() bfin_read16(CAN_MB21_DATA1) +#define bfin_write_CAN_MB21_DATA1(val) bfin_write16(CAN_MB21_DATA1,val) +#define bfin_read_CAN_MB21_DATA0() bfin_read16(CAN_MB21_DATA0) +#define bfin_write_CAN_MB21_DATA0(val) bfin_write16(CAN_MB21_DATA0,val) + +#define bfin_read_CAN_MB22_ID1() bfin_read16(CAN_MB22_ID1) +#define bfin_write_CAN_MB22_ID1(val) bfin_write16(CAN_MB22_ID1,val) +#define bfin_read_CAN_MB22_ID0() bfin_read16(CAN_MB22_ID0) +#define bfin_write_CAN_MB22_ID0(val) bfin_write16(CAN_MB22_ID0,val) +#define bfin_read_CAN_MB22_TIMESTAMP() bfin_read16(CAN_MB22_TIMESTAMP) +#define bfin_write_CAN_MB22_TIMESTAMP(val) bfin_write16(CAN_MB22_TIMESTAMP,val) +#define bfin_read_CAN_MB22_LENGTH() bfin_read16(CAN_MB22_LENGTH) +#define bfin_write_CAN_MB22_LENGTH(val) bfin_write16(CAN_MB22_LENGTH,val) +#define bfin_read_CAN_MB22_DATA3() bfin_read16(CAN_MB22_DATA3) +#define bfin_write_CAN_MB22_DATA3(val) bfin_write16(CAN_MB22_DATA3,val) +#define bfin_read_CAN_MB22_DATA2() bfin_read16(CAN_MB22_DATA2) +#define bfin_write_CAN_MB22_DATA2(val) bfin_write16(CAN_MB22_DATA2,val) +#define bfin_read_CAN_MB22_DATA1() bfin_read16(CAN_MB22_DATA1) +#define bfin_write_CAN_MB22_DATA1(val) bfin_write16(CAN_MB22_DATA1,val) +#define bfin_read_CAN_MB22_DATA0() bfin_read16(CAN_MB22_DATA0) +#define bfin_write_CAN_MB22_DATA0(val) bfin_write16(CAN_MB22_DATA0,val) + +#define bfin_read_CAN_MB23_ID1() bfin_read16(CAN_MB23_ID1) +#define bfin_write_CAN_MB23_ID1(val) bfin_write16(CAN_MB23_ID1,val) +#define bfin_read_CAN_MB23_ID0() bfin_read16(CAN_MB23_ID0) +#define bfin_write_CAN_MB23_ID0(val) bfin_write16(CAN_MB23_ID0,val) +#define bfin_read_CAN_MB23_TIMESTAMP() bfin_read16(CAN_MB23_TIMESTAMP) +#define bfin_write_CAN_MB23_TIMESTAMP(val) bfin_write16(CAN_MB23_TIMESTAMP,val) +#define bfin_read_CAN_MB23_LENGTH() bfin_read16(CAN_MB23_LENGTH) +#define bfin_write_CAN_MB23_LENGTH(val) bfin_write16(CAN_MB23_LENGTH,val) +#define bfin_read_CAN_MB23_DATA3() bfin_read16(CAN_MB23_DATA3) +#define bfin_write_CAN_MB23_DATA3(val) bfin_write16(CAN_MB23_DATA3,val) +#define bfin_read_CAN_MB23_DATA2() bfin_read16(CAN_MB23_DATA2) +#define bfin_write_CAN_MB23_DATA2(val) bfin_write16(CAN_MB23_DATA2,val) +#define bfin_read_CAN_MB23_DATA1() bfin_read16(CAN_MB23_DATA1) +#define bfin_write_CAN_MB23_DATA1(val) bfin_write16(CAN_MB23_DATA1,val) +#define bfin_read_CAN_MB23_DATA0() bfin_read16(CAN_MB23_DATA0) +#define bfin_write_CAN_MB23_DATA0(val) bfin_write16(CAN_MB23_DATA0,val) + +#define bfin_read_CAN_MB24_ID1() bfin_read16(CAN_MB24_ID1) +#define bfin_write_CAN_MB24_ID1(val) bfin_write16(CAN_MB24_ID1,val) +#define bfin_read_CAN_MB24_ID0() bfin_read16(CAN_MB24_ID0) +#define bfin_write_CAN_MB24_ID0(val) bfin_write16(CAN_MB24_ID0,val) +#define bfin_read_CAN_MB24_TIMESTAMP() bfin_read16(CAN_MB24_TIMESTAMP) +#define bfin_write_CAN_MB24_TIMESTAMP(val) bfin_write16(CAN_MB24_TIMESTAMP,val) +#define bfin_read_CAN_MB24_LENGTH() bfin_read16(CAN_MB24_LENGTH) +#define bfin_write_CAN_MB24_LENGTH(val) bfin_write16(CAN_MB24_LENGTH,val) +#define bfin_read_CAN_MB24_DATA3() bfin_read16(CAN_MB24_DATA3) +#define bfin_write_CAN_MB24_DATA3(val) bfin_write16(CAN_MB24_DATA3,val) +#define bfin_read_CAN_MB24_DATA2() bfin_read16(CAN_MB24_DATA2) +#define bfin_write_CAN_MB24_DATA2(val) bfin_write16(CAN_MB24_DATA2,val) +#define bfin_read_CAN_MB24_DATA1() bfin_read16(CAN_MB24_DATA1) +#define bfin_write_CAN_MB24_DATA1(val) bfin_write16(CAN_MB24_DATA1,val) +#define bfin_read_CAN_MB24_DATA0() bfin_read16(CAN_MB24_DATA0) +#define bfin_write_CAN_MB24_DATA0(val) bfin_write16(CAN_MB24_DATA0,val) + +#define bfin_read_CAN_MB25_ID1() bfin_read16(CAN_MB25_ID1) +#define bfin_write_CAN_MB25_ID1(val) bfin_write16(CAN_MB25_ID1,val) +#define bfin_read_CAN_MB25_ID0() bfin_read16(CAN_MB25_ID0) +#define bfin_write_CAN_MB25_ID0(val) bfin_write16(CAN_MB25_ID0,val) +#define bfin_read_CAN_MB25_TIMESTAMP() bfin_read16(CAN_MB25_TIMESTAMP) +#define bfin_write_CAN_MB25_TIMESTAMP(val) bfin_write16(CAN_MB25_TIMESTAMP,val) +#define bfin_read_CAN_MB25_LENGTH() bfin_read16(CAN_MB25_LENGTH) +#define bfin_write_CAN_MB25_LENGTH(val) bfin_write16(CAN_MB25_LENGTH,val) +#define bfin_read_CAN_MB25_DATA3() bfin_read16(CAN_MB25_DATA3) +#define bfin_write_CAN_MB25_DATA3(val) bfin_write16(CAN_MB25_DATA3,val) +#define bfin_read_CAN_MB25_DATA2() bfin_read16(CAN_MB25_DATA2) +#define bfin_write_CAN_MB25_DATA2(val) bfin_write16(CAN_MB25_DATA2,val) +#define bfin_read_CAN_MB25_DATA1() bfin_read16(CAN_MB25_DATA1) +#define bfin_write_CAN_MB25_DATA1(val) bfin_write16(CAN_MB25_DATA1,val) +#define bfin_read_CAN_MB25_DATA0() bfin_read16(CAN_MB25_DATA0) +#define bfin_write_CAN_MB25_DATA0(val) bfin_write16(CAN_MB25_DATA0,val) + +#define bfin_read_CAN_MB26_ID1() bfin_read16(CAN_MB26_ID1) +#define bfin_write_CAN_MB26_ID1(val) bfin_write16(CAN_MB26_ID1,val) +#define bfin_read_CAN_MB26_ID0() bfin_read16(CAN_MB26_ID0) +#define bfin_write_CAN_MB26_ID0(val) bfin_write16(CAN_MB26_ID0,val) +#define bfin_read_CAN_MB26_TIMESTAMP() bfin_read16(CAN_MB26_TIMESTAMP) +#define bfin_write_CAN_MB26_TIMESTAMP(val) bfin_write16(CAN_MB26_TIMESTAMP,val) +#define bfin_read_CAN_MB26_LENGTH() bfin_read16(CAN_MB26_LENGTH) +#define bfin_write_CAN_MB26_LENGTH(val) bfin_write16(CAN_MB26_LENGTH,val) +#define bfin_read_CAN_MB26_DATA3() bfin_read16(CAN_MB26_DATA3) +#define bfin_write_CAN_MB26_DATA3(val) bfin_write16(CAN_MB26_DATA3,val) +#define bfin_read_CAN_MB26_DATA2() bfin_read16(CAN_MB26_DATA2) +#define bfin_write_CAN_MB26_DATA2(val) bfin_write16(CAN_MB26_DATA2,val) +#define bfin_read_CAN_MB26_DATA1() bfin_read16(CAN_MB26_DATA1) +#define bfin_write_CAN_MB26_DATA1(val) bfin_write16(CAN_MB26_DATA1,val) +#define bfin_read_CAN_MB26_DATA0() bfin_read16(CAN_MB26_DATA0) +#define bfin_write_CAN_MB26_DATA0(val) bfin_write16(CAN_MB26_DATA0,val) + +#define bfin_read_CAN_MB27_ID1() bfin_read16(CAN_MB27_ID1) +#define bfin_write_CAN_MB27_ID1(val) bfin_write16(CAN_MB27_ID1,val) +#define bfin_read_CAN_MB27_ID0() bfin_read16(CAN_MB27_ID0) +#define bfin_write_CAN_MB27_ID0(val) bfin_write16(CAN_MB27_ID0,val) +#define bfin_read_CAN_MB27_TIMESTAMP() bfin_read16(CAN_MB27_TIMESTAMP) +#define bfin_write_CAN_MB27_TIMESTAMP(val) bfin_write16(CAN_MB27_TIMESTAMP,val) +#define bfin_read_CAN_MB27_LENGTH() bfin_read16(CAN_MB27_LENGTH) +#define bfin_write_CAN_MB27_LENGTH(val) bfin_write16(CAN_MB27_LENGTH,val) +#define bfin_read_CAN_MB27_DATA3() bfin_read16(CAN_MB27_DATA3) +#define bfin_write_CAN_MB27_DATA3(val) bfin_write16(CAN_MB27_DATA3,val) +#define bfin_read_CAN_MB27_DATA2() bfin_read16(CAN_MB27_DATA2) +#define bfin_write_CAN_MB27_DATA2(val) bfin_write16(CAN_MB27_DATA2,val) +#define bfin_read_CAN_MB27_DATA1() bfin_read16(CAN_MB27_DATA1) +#define bfin_write_CAN_MB27_DATA1(val) bfin_write16(CAN_MB27_DATA1,val) +#define bfin_read_CAN_MB27_DATA0() bfin_read16(CAN_MB27_DATA0) +#define bfin_write_CAN_MB27_DATA0(val) bfin_write16(CAN_MB27_DATA0,val) + +#define bfin_read_CAN_MB28_ID1() bfin_read16(CAN_MB28_ID1) +#define bfin_write_CAN_MB28_ID1(val) bfin_write16(CAN_MB28_ID1,val) +#define bfin_read_CAN_MB28_ID0() bfin_read16(CAN_MB28_ID0) +#define bfin_write_CAN_MB28_ID0(val) bfin_write16(CAN_MB28_ID0,val) +#define bfin_read_CAN_MB28_TIMESTAMP() bfin_read16(CAN_MB28_TIMESTAMP) +#define bfin_write_CAN_MB28_TIMESTAMP(val) bfin_write16(CAN_MB28_TIMESTAMP,val) +#define bfin_read_CAN_MB28_LENGTH() bfin_read16(CAN_MB28_LENGTH) +#define bfin_write_CAN_MB28_LENGTH(val) bfin_write16(CAN_MB28_LENGTH,val) +#define bfin_read_CAN_MB28_DATA3() bfin_read16(CAN_MB28_DATA3) +#define bfin_write_CAN_MB28_DATA3(val) bfin_write16(CAN_MB28_DATA3,val) +#define bfin_read_CAN_MB28_DATA2() bfin_read16(CAN_MB28_DATA2) +#define bfin_write_CAN_MB28_DATA2(val) bfin_write16(CAN_MB28_DATA2,val) +#define bfin_read_CAN_MB28_DATA1() bfin_read16(CAN_MB28_DATA1) +#define bfin_write_CAN_MB28_DATA1(val) bfin_write16(CAN_MB28_DATA1,val) +#define bfin_read_CAN_MB28_DATA0() bfin_read16(CAN_MB28_DATA0) +#define bfin_write_CAN_MB28_DATA0(val) bfin_write16(CAN_MB28_DATA0,val) + +#define bfin_read_CAN_MB29_ID1() bfin_read16(CAN_MB29_ID1) +#define bfin_write_CAN_MB29_ID1(val) bfin_write16(CAN_MB29_ID1,val) +#define bfin_read_CAN_MB29_ID0() bfin_read16(CAN_MB29_ID0) +#define bfin_write_CAN_MB29_ID0(val) bfin_write16(CAN_MB29_ID0,val) +#define bfin_read_CAN_MB29_TIMESTAMP() bfin_read16(CAN_MB29_TIMESTAMP) +#define bfin_write_CAN_MB29_TIMESTAMP(val) bfin_write16(CAN_MB29_TIMESTAMP,val) +#define bfin_read_CAN_MB29_LENGTH() bfin_read16(CAN_MB29_LENGTH) +#define bfin_write_CAN_MB29_LENGTH(val) bfin_write16(CAN_MB29_LENGTH,val) +#define bfin_read_CAN_MB29_DATA3() bfin_read16(CAN_MB29_DATA3) +#define bfin_write_CAN_MB29_DATA3(val) bfin_write16(CAN_MB29_DATA3,val) +#define bfin_read_CAN_MB29_DATA2() bfin_read16(CAN_MB29_DATA2) +#define bfin_write_CAN_MB29_DATA2(val) bfin_write16(CAN_MB29_DATA2,val) +#define bfin_read_CAN_MB29_DATA1() bfin_read16(CAN_MB29_DATA1) +#define bfin_write_CAN_MB29_DATA1(val) bfin_write16(CAN_MB29_DATA1,val) +#define bfin_read_CAN_MB29_DATA0() bfin_read16(CAN_MB29_DATA0) +#define bfin_write_CAN_MB29_DATA0(val) bfin_write16(CAN_MB29_DATA0,val) + +#define bfin_read_CAN_MB30_ID1() bfin_read16(CAN_MB30_ID1) +#define bfin_write_CAN_MB30_ID1(val) bfin_write16(CAN_MB30_ID1,val) +#define bfin_read_CAN_MB30_ID0() bfin_read16(CAN_MB30_ID0) +#define bfin_write_CAN_MB30_ID0(val) bfin_write16(CAN_MB30_ID0,val) +#define bfin_read_CAN_MB30_TIMESTAMP() bfin_read16(CAN_MB30_TIMESTAMP) +#define bfin_write_CAN_MB30_TIMESTAMP(val) bfin_write16(CAN_MB30_TIMESTAMP,val) +#define bfin_read_CAN_MB30_LENGTH() bfin_read16(CAN_MB30_LENGTH) +#define bfin_write_CAN_MB30_LENGTH(val) bfin_write16(CAN_MB30_LENGTH,val) +#define bfin_read_CAN_MB30_DATA3() bfin_read16(CAN_MB30_DATA3) +#define bfin_write_CAN_MB30_DATA3(val) bfin_write16(CAN_MB30_DATA3,val) +#define bfin_read_CAN_MB30_DATA2() bfin_read16(CAN_MB30_DATA2) +#define bfin_write_CAN_MB30_DATA2(val) bfin_write16(CAN_MB30_DATA2,val) +#define bfin_read_CAN_MB30_DATA1() bfin_read16(CAN_MB30_DATA1) +#define bfin_write_CAN_MB30_DATA1(val) bfin_write16(CAN_MB30_DATA1,val) +#define bfin_read_CAN_MB30_DATA0() bfin_read16(CAN_MB30_DATA0) +#define bfin_write_CAN_MB30_DATA0(val) bfin_write16(CAN_MB30_DATA0,val) + +#define bfin_read_CAN_MB31_ID1() bfin_read16(CAN_MB31_ID1) +#define bfin_write_CAN_MB31_ID1(val) bfin_write16(CAN_MB31_ID1,val) +#define bfin_read_CAN_MB31_ID0() bfin_read16(CAN_MB31_ID0) +#define bfin_write_CAN_MB31_ID0(val) bfin_write16(CAN_MB31_ID0,val) +#define bfin_read_CAN_MB31_TIMESTAMP() bfin_read16(CAN_MB31_TIMESTAMP) +#define bfin_write_CAN_MB31_TIMESTAMP(val) bfin_write16(CAN_MB31_TIMESTAMP,val) +#define bfin_read_CAN_MB31_LENGTH() bfin_read16(CAN_MB31_LENGTH) +#define bfin_write_CAN_MB31_LENGTH(val) bfin_write16(CAN_MB31_LENGTH,val) +#define bfin_read_CAN_MB31_DATA3() bfin_read16(CAN_MB31_DATA3) +#define bfin_write_CAN_MB31_DATA3(val) bfin_write16(CAN_MB31_DATA3,val) +#define bfin_read_CAN_MB31_DATA2() bfin_read16(CAN_MB31_DATA2) +#define bfin_write_CAN_MB31_DATA2(val) bfin_write16(CAN_MB31_DATA2,val) +#define bfin_read_CAN_MB31_DATA1() bfin_read16(CAN_MB31_DATA1) +#define bfin_write_CAN_MB31_DATA1(val) bfin_write16(CAN_MB31_DATA1,val) +#define bfin_read_CAN_MB31_DATA0() bfin_read16(CAN_MB31_DATA0) +#define bfin_write_CAN_MB31_DATA0(val) bfin_write16(CAN_MB31_DATA0,val) + +/* CAN Mailbox Area Macros */ +#define bfin_read_CAN_MB_ID1(x)() bfin_read16(CAN_MB_ID1(x)) +#define bfin_write_CAN_MB_ID1(x)(val) bfin_write16(CAN_MB_ID1(x),val) +#define bfin_read_CAN_MB_ID0(x)() bfin_read16(CAN_MB_ID0(x)) +#define bfin_write_CAN_MB_ID0(x)(val) bfin_write16(CAN_MB_ID0(x),val) +#define bfin_read_CAN_MB_TIMESTAMP(x)() bfin_read16(CAN_MB_TIMESTAMP(x)) +#define bfin_write_CAN_MB_TIMESTAMP(x)(val) bfin_write16(CAN_MB_TIMESTAMP(x),val) +#define bfin_read_CAN_MB_LENGTH(x)() bfin_read16(CAN_MB_LENGTH(x)) +#define bfin_write_CAN_MB_LENGTH(x)(val) bfin_write16(CAN_MB_LENGTH(x),val) +#define bfin_read_CAN_MB_DATA3(x)() bfin_read16(CAN_MB_DATA3(x)) +#define bfin_write_CAN_MB_DATA3(x)(val) bfin_write16(CAN_MB_DATA3(x),val) +#define bfin_read_CAN_MB_DATA2(x)() bfin_read16(CAN_MB_DATA2(x)) +#define bfin_write_CAN_MB_DATA2(x)(val) bfin_write16(CAN_MB_DATA2(x),val) +#define bfin_read_CAN_MB_DATA1(x)() bfin_read16(CAN_MB_DATA1(x)) +#define bfin_write_CAN_MB_DATA1(x)(val) bfin_write16(CAN_MB_DATA1(x),val) +#define bfin_read_CAN_MB_DATA0(x)() bfin_read16(CAN_MB_DATA0(x)) +#define bfin_write_CAN_MB_DATA0(x)(val) bfin_write16(CAN_MB_DATA0(x),val) + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER,val) +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER,val) +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER,val) +#define bfin_read_PORT_MUX() bfin_read16(BFIN_PORT_MUX) +#define bfin_write_PORT_MUX(val) bfin_write16(BFIN_PORT_MUX,val) + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL,val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT,val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT,val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT,val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW,val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT,val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT,val) + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL,val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT,val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT,val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT,val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW,val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT,val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT,val) + +#endif /* _CDEF_BF534_H */ diff --git a/include/asm-blackfin/mach-bf537/cdefBF537.h b/include/asm-blackfin/mach-bf537/cdefBF537.h new file mode 100644 index 0000000000..932a1b6b5d --- /dev/null +++ b/include/asm-blackfin/mach-bf537/cdefBF537.h @@ -0,0 +1,209 @@ +/* + * File: include/asm-blackfin/mach-bf537/cdefBF537.h + * Based on: + * Author: + * + * Created: + * Description: + * System MMR Register Map + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF537_H +#define _CDEF_BF537_H + +/* Include MMRs Common to BF534 */ +#include "cdefBF534.h" + +/* Include all Core registers and bit definitions */ +#include "defBF537.h" + +/* Include Macro "Defines" For EMAC (Unique to BF536/BF537 */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ +#define pEMAC_OPMODE ((volatile unsigned long *)EMAC_OPMODE) +#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) +#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE,val) +#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) +#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO,val) +#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI) +#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI,val) +#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO) +#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO,val) +#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI) +#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI,val) +#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD) +#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD,val) +#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT) +#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT,val) +#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC) +#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC,val) +#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1) +#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1,val) +#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2) +#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2,val) +#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL) +#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL,val) +#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0) +#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0,val) +#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1) +#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1,val) +#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2) +#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2,val) +#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3) +#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3,val) +#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD) +#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD,val) +#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF) +#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF,val) +#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0) +#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0,val) +#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) +#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1,val) + +#define pEMAC_SYSCTL ((volatile unsigned long *)EMAC_SYSCTL) +#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) +#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL,val) +#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) +#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT,val) +#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT) +#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT,val) +#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY) +#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY,val) +#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE) +#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE,val) +#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT) +#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT,val) +#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY) +#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY,val) +#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE) +#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE,val) + +#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL) +#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL,val) +#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS) +#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS,val) +#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE) +#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE,val) +#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS) +#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS,val) +#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE) +#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE,val) + +#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK) +#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK,val) +#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS) +#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS,val) +#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN) +#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN,val) +#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET) +#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET,val) +#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF) +#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF,val) +#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST) +#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST,val) +#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI) +#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI,val) +#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD) +#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD,val) +#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI) +#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI,val) +#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO) +#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO,val) +#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG) +#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG,val) +#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL) +#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL,val) +#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE) +#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE,val) +#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE) +#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE,val) +#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM) +#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM,val) +#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT) +#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT,val) +#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED) +#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED,val) +#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT) +#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT,val) +#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) +#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64,val) +#define pEMAC_RXC_LT128 ((volatile unsigned long *)EMAC_RXC_LT128) +#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) +#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128,val) +#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) +#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256,val) +#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512) +#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512,val) +#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024) +#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024,val) +#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024) +#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024,val) + +#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK) +#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK,val) +#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL) +#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL,val) +#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL) +#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL,val) +#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET) +#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET,val) +#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER) +#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER,val) +#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL) +#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL,val) +#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL) +#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL,val) +#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND) +#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND,val) +#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR) +#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR,val) +#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST) +#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST,val) +#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI) +#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI,val) +#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD) +#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD,val) +#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR) +#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR,val) +#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL) +#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL,val) +#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM) +#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM,val) +#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT) +#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT,val) +#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64) +#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64,val) +#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128) +#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128,val) +#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256) +#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256,val) +#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512) +#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512,val) +#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024) +#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024,val) +#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024) +#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024,val) +#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) +#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT,val) + +#endif /* _CDEF_BF537_H */ diff --git a/include/asm-blackfin/mach-bf537/defBF534.h b/include/asm-blackfin/mach-bf537/defBF534.h new file mode 100644 index 0000000000..e605e97090 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/defBF534.h @@ -0,0 +1,2501 @@ +/* + * File: include/asm-blackfin/mach-bf537/cdefBF537.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF534_H +#define _DEF_BF534_H + +/* Include all Core registers and bit definitions */ +#include + +/************************************************************************************ +** System MMR Register Map +*************************************************************************************/ +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ +#define CHIPID 0xFFC00014 /* Chip ID Register */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration Register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Traffic Control Registers */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ + +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ + +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ + +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ + +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ + +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ + +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ + +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ + +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ + +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ + +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ + +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ + +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ + +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ + +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ + +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ + +/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ +/* For Mailboxes 0-15 */ +#define CAN_MC1 0xFFC02A00 /* Mailbox config reg 1 */ +#define CAN_MD1 0xFFC02A04 /* Mailbox direction reg 1 */ +#define CAN_TRS1 0xFFC02A08 /* Transmit Request Set reg 1 */ +#define CAN_TRR1 0xFFC02A0C /* Transmit Request Reset reg 1 */ +#define CAN_TA1 0xFFC02A10 /* Transmit Acknowledge reg 1 */ +#define CAN_AA1 0xFFC02A14 /* Transmit Abort Acknowledge reg 1 */ +#define CAN_RMP1 0xFFC02A18 /* Receive Message Pending reg 1 */ +#define CAN_RML1 0xFFC02A1C /* Receive Message Lost reg 1 */ +#define CAN_MBTIF1 0xFFC02A20 /* Mailbox Transmit Interrupt Flag reg 1 */ +#define CAN_MBRIF1 0xFFC02A24 /* Mailbox Receive Interrupt Flag reg 1 */ +#define CAN_MBIM1 0xFFC02A28 /* Mailbox Interrupt Mask reg 1 */ +#define CAN_RFH1 0xFFC02A2C /* Remote Frame Handling reg 1 */ +#define CAN_OPSS1 0xFFC02A30 /* Overwrite Protection Single Shot Xmit reg 1 */ + +/* For Mailboxes 16-31 */ +#define CAN_MC2 0xFFC02A40 /* Mailbox config reg 2 */ +#define CAN_MD2 0xFFC02A44 /* Mailbox direction reg 2 */ +#define CAN_TRS2 0xFFC02A48 /* Transmit Request Set reg 2 */ +#define CAN_TRR2 0xFFC02A4C /* Transmit Request Reset reg 2 */ +#define CAN_TA2 0xFFC02A50 /* Transmit Acknowledge reg 2 */ +#define CAN_AA2 0xFFC02A54 /* Transmit Abort Acknowledge reg 2 */ +#define CAN_RMP2 0xFFC02A58 /* Receive Message Pending reg 2 */ +#define CAN_RML2 0xFFC02A5C /* Receive Message Lost reg 2 */ +#define CAN_MBTIF2 0xFFC02A60 /* Mailbox Transmit Interrupt Flag reg 2 */ +#define CAN_MBRIF2 0xFFC02A64 /* Mailbox Receive Interrupt Flag reg 2 */ +#define CAN_MBIM2 0xFFC02A68 /* Mailbox Interrupt Mask reg 2 */ +#define CAN_RFH2 0xFFC02A6C /* Remote Frame Handling reg 2 */ +#define CAN_OPSS2 0xFFC02A70 /* Overwrite Protection Single Shot Xmit reg 2 */ + +/* CAN Configuration, Control, and Status Registers */ +#define CAN_CLOCK 0xFFC02A80 /* Bit Timing Configuration register 0 */ +#define CAN_TIMING 0xFFC02A84 /* Bit Timing Configuration register 1 */ +#define CAN_DEBUG 0xFFC02A88 /* Debug Register */ +#define CAN_STATUS 0xFFC02A8C /* Global Status Register */ +#define CAN_CEC 0xFFC02A90 /* Error Counter Register */ +#define CAN_GIS 0xFFC02A94 /* Global Interrupt Status Register */ +#define CAN_GIM 0xFFC02A98 /* Global Interrupt Mask Register */ +#define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */ +#define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */ +#define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */ +#define CAN_SFCMVER 0xFFC02AA8 /* Version Code Register */ +#define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */ +#define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */ +#define CAN_ESR 0xFFC02AB4 /* Error Status Register */ +#define CAN_UCREG 0xFFC02AC0 /* Universal Counter Register/Capture Register */ +#define CAN_UCCNT 0xFFC02AC4 /* Universal Counter */ +#define CAN_UCRC 0xFFC02AC8 /* Universal Counter Force Reload Register */ +#define CAN_UCCNF 0xFFC02ACC /* Universal Counter Configuration Register */ + +/* Mailbox Acceptance Masks */ +#define CAN_AM00L 0xFFC02B00 /* Mailbox 0 Low Acceptance Mask */ +#define CAN_AM00H 0xFFC02B04 /* Mailbox 0 High Acceptance Mask */ +#define CAN_AM01L 0xFFC02B08 /* Mailbox 1 Low Acceptance Mask */ +#define CAN_AM01H 0xFFC02B0C /* Mailbox 1 High Acceptance Mask */ +#define CAN_AM02L 0xFFC02B10 /* Mailbox 2 Low Acceptance Mask */ +#define CAN_AM02H 0xFFC02B14 /* Mailbox 2 High Acceptance Mask */ +#define CAN_AM03L 0xFFC02B18 /* Mailbox 3 Low Acceptance Mask */ +#define CAN_AM03H 0xFFC02B1C /* Mailbox 3 High Acceptance Mask */ +#define CAN_AM04L 0xFFC02B20 /* Mailbox 4 Low Acceptance Mask */ +#define CAN_AM04H 0xFFC02B24 /* Mailbox 4 High Acceptance Mask */ +#define CAN_AM05L 0xFFC02B28 /* Mailbox 5 Low Acceptance Mask */ +#define CAN_AM05H 0xFFC02B2C /* Mailbox 5 High Acceptance Mask */ +#define CAN_AM06L 0xFFC02B30 /* Mailbox 6 Low Acceptance Mask */ +#define CAN_AM06H 0xFFC02B34 /* Mailbox 6 High Acceptance Mask */ +#define CAN_AM07L 0xFFC02B38 /* Mailbox 7 Low Acceptance Mask */ +#define CAN_AM07H 0xFFC02B3C /* Mailbox 7 High Acceptance Mask */ +#define CAN_AM08L 0xFFC02B40 /* Mailbox 8 Low Acceptance Mask */ +#define CAN_AM08H 0xFFC02B44 /* Mailbox 8 High Acceptance Mask */ +#define CAN_AM09L 0xFFC02B48 /* Mailbox 9 Low Acceptance Mask */ +#define CAN_AM09H 0xFFC02B4C /* Mailbox 9 High Acceptance Mask */ +#define CAN_AM10L 0xFFC02B50 /* Mailbox 10 Low Acceptance Mask */ +#define CAN_AM10H 0xFFC02B54 /* Mailbox 10 High Acceptance Mask */ +#define CAN_AM11L 0xFFC02B58 /* Mailbox 11 Low Acceptance Mask */ +#define CAN_AM11H 0xFFC02B5C /* Mailbox 11 High Acceptance Mask */ +#define CAN_AM12L 0xFFC02B60 /* Mailbox 12 Low Acceptance Mask */ +#define CAN_AM12H 0xFFC02B64 /* Mailbox 12 High Acceptance Mask */ +#define CAN_AM13L 0xFFC02B68 /* Mailbox 13 Low Acceptance Mask */ +#define CAN_AM13H 0xFFC02B6C /* Mailbox 13 High Acceptance Mask */ +#define CAN_AM14L 0xFFC02B70 /* Mailbox 14 Low Acceptance Mask */ +#define CAN_AM14H 0xFFC02B74 /* Mailbox 14 High Acceptance Mask */ +#define CAN_AM15L 0xFFC02B78 /* Mailbox 15 Low Acceptance Mask */ +#define CAN_AM15H 0xFFC02B7C /* Mailbox 15 High Acceptance Mask */ + +#define CAN_AM16L 0xFFC02B80 /* Mailbox 16 Low Acceptance Mask */ +#define CAN_AM16H 0xFFC02B84 /* Mailbox 16 High Acceptance Mask */ +#define CAN_AM17L 0xFFC02B88 /* Mailbox 17 Low Acceptance Mask */ +#define CAN_AM17H 0xFFC02B8C /* Mailbox 17 High Acceptance Mask */ +#define CAN_AM18L 0xFFC02B90 /* Mailbox 18 Low Acceptance Mask */ +#define CAN_AM18H 0xFFC02B94 /* Mailbox 18 High Acceptance Mask */ +#define CAN_AM19L 0xFFC02B98 /* Mailbox 19 Low Acceptance Mask */ +#define CAN_AM19H 0xFFC02B9C /* Mailbox 19 High Acceptance Mask */ +#define CAN_AM20L 0xFFC02BA0 /* Mailbox 20 Low Acceptance Mask */ +#define CAN_AM20H 0xFFC02BA4 /* Mailbox 20 High Acceptance Mask */ +#define CAN_AM21L 0xFFC02BA8 /* Mailbox 21 Low Acceptance Mask */ +#define CAN_AM21H 0xFFC02BAC /* Mailbox 21 High Acceptance Mask */ +#define CAN_AM22L 0xFFC02BB0 /* Mailbox 22 Low Acceptance Mask */ +#define CAN_AM22H 0xFFC02BB4 /* Mailbox 22 High Acceptance Mask */ +#define CAN_AM23L 0xFFC02BB8 /* Mailbox 23 Low Acceptance Mask */ +#define CAN_AM23H 0xFFC02BBC /* Mailbox 23 High Acceptance Mask */ +#define CAN_AM24L 0xFFC02BC0 /* Mailbox 24 Low Acceptance Mask */ +#define CAN_AM24H 0xFFC02BC4 /* Mailbox 24 High Acceptance Mask */ +#define CAN_AM25L 0xFFC02BC8 /* Mailbox 25 Low Acceptance Mask */ +#define CAN_AM25H 0xFFC02BCC /* Mailbox 25 High Acceptance Mask */ +#define CAN_AM26L 0xFFC02BD0 /* Mailbox 26 Low Acceptance Mask */ +#define CAN_AM26H 0xFFC02BD4 /* Mailbox 26 High Acceptance Mask */ +#define CAN_AM27L 0xFFC02BD8 /* Mailbox 27 Low Acceptance Mask */ +#define CAN_AM27H 0xFFC02BDC /* Mailbox 27 High Acceptance Mask */ +#define CAN_AM28L 0xFFC02BE0 /* Mailbox 28 Low Acceptance Mask */ +#define CAN_AM28H 0xFFC02BE4 /* Mailbox 28 High Acceptance Mask */ +#define CAN_AM29L 0xFFC02BE8 /* Mailbox 29 Low Acceptance Mask */ +#define CAN_AM29H 0xFFC02BEC /* Mailbox 29 High Acceptance Mask */ +#define CAN_AM30L 0xFFC02BF0 /* Mailbox 30 Low Acceptance Mask */ +#define CAN_AM30H 0xFFC02BF4 /* Mailbox 30 High Acceptance Mask */ +#define CAN_AM31L 0xFFC02BF8 /* Mailbox 31 Low Acceptance Mask */ +#define CAN_AM31H 0xFFC02BFC /* Mailbox 31 High Acceptance Mask */ + +/* CAN Acceptance Mask Macros */ +#define CAN_AM_L(x) (CAN_AM00L+((x)*0x8)) +#define CAN_AM_H(x) (CAN_AM00H+((x)*0x8)) + +/* Mailbox Registers */ +#define CAN_MB00_DATA0 0xFFC02C00 /* Mailbox 0 Data Word 0 [15:0] Register */ +#define CAN_MB00_DATA1 0xFFC02C04 /* Mailbox 0 Data Word 1 [31:16] Register */ +#define CAN_MB00_DATA2 0xFFC02C08 /* Mailbox 0 Data Word 2 [47:32] Register */ +#define CAN_MB00_DATA3 0xFFC02C0C /* Mailbox 0 Data Word 3 [63:48] Register */ +#define CAN_MB00_LENGTH 0xFFC02C10 /* Mailbox 0 Data Length Code Register */ +#define CAN_MB00_TIMESTAMP 0xFFC02C14 /* Mailbox 0 Time Stamp Value Register */ +#define CAN_MB00_ID0 0xFFC02C18 /* Mailbox 0 Identifier Low Register */ +#define CAN_MB00_ID1 0xFFC02C1C /* Mailbox 0 Identifier High Register */ + +#define CAN_MB01_DATA0 0xFFC02C20 /* Mailbox 1 Data Word 0 [15:0] Register */ +#define CAN_MB01_DATA1 0xFFC02C24 /* Mailbox 1 Data Word 1 [31:16] Register */ +#define CAN_MB01_DATA2 0xFFC02C28 /* Mailbox 1 Data Word 2 [47:32] Register */ +#define CAN_MB01_DATA3 0xFFC02C2C /* Mailbox 1 Data Word 3 [63:48] Register */ +#define CAN_MB01_LENGTH 0xFFC02C30 /* Mailbox 1 Data Length Code Register */ +#define CAN_MB01_TIMESTAMP 0xFFC02C34 /* Mailbox 1 Time Stamp Value Register */ +#define CAN_MB01_ID0 0xFFC02C38 /* Mailbox 1 Identifier Low Register */ +#define CAN_MB01_ID1 0xFFC02C3C /* Mailbox 1 Identifier High Register */ + +#define CAN_MB02_DATA0 0xFFC02C40 /* Mailbox 2 Data Word 0 [15:0] Register */ +#define CAN_MB02_DATA1 0xFFC02C44 /* Mailbox 2 Data Word 1 [31:16] Register */ +#define CAN_MB02_DATA2 0xFFC02C48 /* Mailbox 2 Data Word 2 [47:32] Register */ +#define CAN_MB02_DATA3 0xFFC02C4C /* Mailbox 2 Data Word 3 [63:48] Register */ +#define CAN_MB02_LENGTH 0xFFC02C50 /* Mailbox 2 Data Length Code Register */ +#define CAN_MB02_TIMESTAMP 0xFFC02C54 /* Mailbox 2 Time Stamp Value Register */ +#define CAN_MB02_ID0 0xFFC02C58 /* Mailbox 2 Identifier Low Register */ +#define CAN_MB02_ID1 0xFFC02C5C /* Mailbox 2 Identifier High Register */ + +#define CAN_MB03_DATA0 0xFFC02C60 /* Mailbox 3 Data Word 0 [15:0] Register */ +#define CAN_MB03_DATA1 0xFFC02C64 /* Mailbox 3 Data Word 1 [31:16] Register */ +#define CAN_MB03_DATA2 0xFFC02C68 /* Mailbox 3 Data Word 2 [47:32] Register */ +#define CAN_MB03_DATA3 0xFFC02C6C /* Mailbox 3 Data Word 3 [63:48] Register */ +#define CAN_MB03_LENGTH 0xFFC02C70 /* Mailbox 3 Data Length Code Register */ +#define CAN_MB03_TIMESTAMP 0xFFC02C74 /* Mailbox 3 Time Stamp Value Register */ +#define CAN_MB03_ID0 0xFFC02C78 /* Mailbox 3 Identifier Low Register */ +#define CAN_MB03_ID1 0xFFC02C7C /* Mailbox 3 Identifier High Register */ + +#define CAN_MB04_DATA0 0xFFC02C80 /* Mailbox 4 Data Word 0 [15:0] Register */ +#define CAN_MB04_DATA1 0xFFC02C84 /* Mailbox 4 Data Word 1 [31:16] Register */ +#define CAN_MB04_DATA2 0xFFC02C88 /* Mailbox 4 Data Word 2 [47:32] Register */ +#define CAN_MB04_DATA3 0xFFC02C8C /* Mailbox 4 Data Word 3 [63:48] Register */ +#define CAN_MB04_LENGTH 0xFFC02C90 /* Mailbox 4 Data Length Code Register */ +#define CAN_MB04_TIMESTAMP 0xFFC02C94 /* Mailbox 4 Time Stamp Value Register */ +#define CAN_MB04_ID0 0xFFC02C98 /* Mailbox 4 Identifier Low Register */ +#define CAN_MB04_ID1 0xFFC02C9C /* Mailbox 4 Identifier High Register */ + +#define CAN_MB05_DATA0 0xFFC02CA0 /* Mailbox 5 Data Word 0 [15:0] Register */ +#define CAN_MB05_DATA1 0xFFC02CA4 /* Mailbox 5 Data Word 1 [31:16] Register */ +#define CAN_MB05_DATA2 0xFFC02CA8 /* Mailbox 5 Data Word 2 [47:32] Register */ +#define CAN_MB05_DATA3 0xFFC02CAC /* Mailbox 5 Data Word 3 [63:48] Register */ +#define CAN_MB05_LENGTH 0xFFC02CB0 /* Mailbox 5 Data Length Code Register */ +#define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* Mailbox 5 Time Stamp Value Register */ +#define CAN_MB05_ID0 0xFFC02CB8 /* Mailbox 5 Identifier Low Register */ +#define CAN_MB05_ID1 0xFFC02CBC /* Mailbox 5 Identifier High Register */ + +#define CAN_MB06_DATA0 0xFFC02CC0 /* Mailbox 6 Data Word 0 [15:0] Register */ +#define CAN_MB06_DATA1 0xFFC02CC4 /* Mailbox 6 Data Word 1 [31:16] Register */ +#define CAN_MB06_DATA2 0xFFC02CC8 /* Mailbox 6 Data Word 2 [47:32] Register */ +#define CAN_MB06_DATA3 0xFFC02CCC /* Mailbox 6 Data Word 3 [63:48] Register */ +#define CAN_MB06_LENGTH 0xFFC02CD0 /* Mailbox 6 Data Length Code Register */ +#define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* Mailbox 6 Time Stamp Value Register */ +#define CAN_MB06_ID0 0xFFC02CD8 /* Mailbox 6 Identifier Low Register */ +#define CAN_MB06_ID1 0xFFC02CDC /* Mailbox 6 Identifier High Register */ + +#define CAN_MB07_DATA0 0xFFC02CE0 /* Mailbox 7 Data Word 0 [15:0] Register */ +#define CAN_MB07_DATA1 0xFFC02CE4 /* Mailbox 7 Data Word 1 [31:16] Register */ +#define CAN_MB07_DATA2 0xFFC02CE8 /* Mailbox 7 Data Word 2 [47:32] Register */ +#define CAN_MB07_DATA3 0xFFC02CEC /* Mailbox 7 Data Word 3 [63:48] Register */ +#define CAN_MB07_LENGTH 0xFFC02CF0 /* Mailbox 7 Data Length Code Register */ +#define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* Mailbox 7 Time Stamp Value Register */ +#define CAN_MB07_ID0 0xFFC02CF8 /* Mailbox 7 Identifier Low Register */ +#define CAN_MB07_ID1 0xFFC02CFC /* Mailbox 7 Identifier High Register */ + +#define CAN_MB08_DATA0 0xFFC02D00 /* Mailbox 8 Data Word 0 [15:0] Register */ +#define CAN_MB08_DATA1 0xFFC02D04 /* Mailbox 8 Data Word 1 [31:16] Register */ +#define CAN_MB08_DATA2 0xFFC02D08 /* Mailbox 8 Data Word 2 [47:32] Register */ +#define CAN_MB08_DATA3 0xFFC02D0C /* Mailbox 8 Data Word 3 [63:48] Register */ +#define CAN_MB08_LENGTH 0xFFC02D10 /* Mailbox 8 Data Length Code Register */ +#define CAN_MB08_TIMESTAMP 0xFFC02D14 /* Mailbox 8 Time Stamp Value Register */ +#define CAN_MB08_ID0 0xFFC02D18 /* Mailbox 8 Identifier Low Register */ +#define CAN_MB08_ID1 0xFFC02D1C /* Mailbox 8 Identifier High Register */ + +#define CAN_MB09_DATA0 0xFFC02D20 /* Mailbox 9 Data Word 0 [15:0] Register */ +#define CAN_MB09_DATA1 0xFFC02D24 /* Mailbox 9 Data Word 1 [31:16] Register */ +#define CAN_MB09_DATA2 0xFFC02D28 /* Mailbox 9 Data Word 2 [47:32] Register */ +#define CAN_MB09_DATA3 0xFFC02D2C /* Mailbox 9 Data Word 3 [63:48] Register */ +#define CAN_MB09_LENGTH 0xFFC02D30 /* Mailbox 9 Data Length Code Register */ +#define CAN_MB09_TIMESTAMP 0xFFC02D34 /* Mailbox 9 Time Stamp Value Register */ +#define CAN_MB09_ID0 0xFFC02D38 /* Mailbox 9 Identifier Low Register */ +#define CAN_MB09_ID1 0xFFC02D3C /* Mailbox 9 Identifier High Register */ + +#define CAN_MB10_DATA0 0xFFC02D40 /* Mailbox 10 Data Word 0 [15:0] Register */ +#define CAN_MB10_DATA1 0xFFC02D44 /* Mailbox 10 Data Word 1 [31:16] Register */ +#define CAN_MB10_DATA2 0xFFC02D48 /* Mailbox 10 Data Word 2 [47:32] Register */ +#define CAN_MB10_DATA3 0xFFC02D4C /* Mailbox 10 Data Word 3 [63:48] Register */ +#define CAN_MB10_LENGTH 0xFFC02D50 /* Mailbox 10 Data Length Code Register */ +#define CAN_MB10_TIMESTAMP 0xFFC02D54 /* Mailbox 10 Time Stamp Value Register */ +#define CAN_MB10_ID0 0xFFC02D58 /* Mailbox 10 Identifier Low Register */ +#define CAN_MB10_ID1 0xFFC02D5C /* Mailbox 10 Identifier High Register */ + +#define CAN_MB11_DATA0 0xFFC02D60 /* Mailbox 11 Data Word 0 [15:0] Register */ +#define CAN_MB11_DATA1 0xFFC02D64 /* Mailbox 11 Data Word 1 [31:16] Register */ +#define CAN_MB11_DATA2 0xFFC02D68 /* Mailbox 11 Data Word 2 [47:32] Register */ +#define CAN_MB11_DATA3 0xFFC02D6C /* Mailbox 11 Data Word 3 [63:48] Register */ +#define CAN_MB11_LENGTH 0xFFC02D70 /* Mailbox 11 Data Length Code Register */ +#define CAN_MB11_TIMESTAMP 0xFFC02D74 /* Mailbox 11 Time Stamp Value Register */ +#define CAN_MB11_ID0 0xFFC02D78 /* Mailbox 11 Identifier Low Register */ +#define CAN_MB11_ID1 0xFFC02D7C /* Mailbox 11 Identifier High Register */ + +#define CAN_MB12_DATA0 0xFFC02D80 /* Mailbox 12 Data Word 0 [15:0] Register */ +#define CAN_MB12_DATA1 0xFFC02D84 /* Mailbox 12 Data Word 1 [31:16] Register */ +#define CAN_MB12_DATA2 0xFFC02D88 /* Mailbox 12 Data Word 2 [47:32] Register */ +#define CAN_MB12_DATA3 0xFFC02D8C /* Mailbox 12 Data Word 3 [63:48] Register */ +#define CAN_MB12_LENGTH 0xFFC02D90 /* Mailbox 12 Data Length Code Register */ +#define CAN_MB12_TIMESTAMP 0xFFC02D94 /* Mailbox 12 Time Stamp Value Register */ +#define CAN_MB12_ID0 0xFFC02D98 /* Mailbox 12 Identifier Low Register */ +#define CAN_MB12_ID1 0xFFC02D9C /* Mailbox 12 Identifier High Register */ + +#define CAN_MB13_DATA0 0xFFC02DA0 /* Mailbox 13 Data Word 0 [15:0] Register */ +#define CAN_MB13_DATA1 0xFFC02DA4 /* Mailbox 13 Data Word 1 [31:16] Register */ +#define CAN_MB13_DATA2 0xFFC02DA8 /* Mailbox 13 Data Word 2 [47:32] Register */ +#define CAN_MB13_DATA3 0xFFC02DAC /* Mailbox 13 Data Word 3 [63:48] Register */ +#define CAN_MB13_LENGTH 0xFFC02DB0 /* Mailbox 13 Data Length Code Register */ +#define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* Mailbox 13 Time Stamp Value Register */ +#define CAN_MB13_ID0 0xFFC02DB8 /* Mailbox 13 Identifier Low Register */ +#define CAN_MB13_ID1 0xFFC02DBC /* Mailbox 13 Identifier High Register */ + +#define CAN_MB14_DATA0 0xFFC02DC0 /* Mailbox 14 Data Word 0 [15:0] Register */ +#define CAN_MB14_DATA1 0xFFC02DC4 /* Mailbox 14 Data Word 1 [31:16] Register */ +#define CAN_MB14_DATA2 0xFFC02DC8 /* Mailbox 14 Data Word 2 [47:32] Register */ +#define CAN_MB14_DATA3 0xFFC02DCC /* Mailbox 14 Data Word 3 [63:48] Register */ +#define CAN_MB14_LENGTH 0xFFC02DD0 /* Mailbox 14 Data Length Code Register */ +#define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* Mailbox 14 Time Stamp Value Register */ +#define CAN_MB14_ID0 0xFFC02DD8 /* Mailbox 14 Identifier Low Register */ +#define CAN_MB14_ID1 0xFFC02DDC /* Mailbox 14 Identifier High Register */ + +#define CAN_MB15_DATA0 0xFFC02DE0 /* Mailbox 15 Data Word 0 [15:0] Register */ +#define CAN_MB15_DATA1 0xFFC02DE4 /* Mailbox 15 Data Word 1 [31:16] Register */ +#define CAN_MB15_DATA2 0xFFC02DE8 /* Mailbox 15 Data Word 2 [47:32] Register */ +#define CAN_MB15_DATA3 0xFFC02DEC /* Mailbox 15 Data Word 3 [63:48] Register */ +#define CAN_MB15_LENGTH 0xFFC02DF0 /* Mailbox 15 Data Length Code Register */ +#define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* Mailbox 15 Time Stamp Value Register */ +#define CAN_MB15_ID0 0xFFC02DF8 /* Mailbox 15 Identifier Low Register */ +#define CAN_MB15_ID1 0xFFC02DFC /* Mailbox 15 Identifier High Register */ + +#define CAN_MB16_DATA0 0xFFC02E00 /* Mailbox 16 Data Word 0 [15:0] Register */ +#define CAN_MB16_DATA1 0xFFC02E04 /* Mailbox 16 Data Word 1 [31:16] Register */ +#define CAN_MB16_DATA2 0xFFC02E08 /* Mailbox 16 Data Word 2 [47:32] Register */ +#define CAN_MB16_DATA3 0xFFC02E0C /* Mailbox 16 Data Word 3 [63:48] Register */ +#define CAN_MB16_LENGTH 0xFFC02E10 /* Mailbox 16 Data Length Code Register */ +#define CAN_MB16_TIMESTAMP 0xFFC02E14 /* Mailbox 16 Time Stamp Value Register */ +#define CAN_MB16_ID0 0xFFC02E18 /* Mailbox 16 Identifier Low Register */ +#define CAN_MB16_ID1 0xFFC02E1C /* Mailbox 16 Identifier High Register */ + +#define CAN_MB17_DATA0 0xFFC02E20 /* Mailbox 17 Data Word 0 [15:0] Register */ +#define CAN_MB17_DATA1 0xFFC02E24 /* Mailbox 17 Data Word 1 [31:16] Register */ +#define CAN_MB17_DATA2 0xFFC02E28 /* Mailbox 17 Data Word 2 [47:32] Register */ +#define CAN_MB17_DATA3 0xFFC02E2C /* Mailbox 17 Data Word 3 [63:48] Register */ +#define CAN_MB17_LENGTH 0xFFC02E30 /* Mailbox 17 Data Length Code Register */ +#define CAN_MB17_TIMESTAMP 0xFFC02E34 /* Mailbox 17 Time Stamp Value Register */ +#define CAN_MB17_ID0 0xFFC02E38 /* Mailbox 17 Identifier Low Register */ +#define CAN_MB17_ID1 0xFFC02E3C /* Mailbox 17 Identifier High Register */ + +#define CAN_MB18_DATA0 0xFFC02E40 /* Mailbox 18 Data Word 0 [15:0] Register */ +#define CAN_MB18_DATA1 0xFFC02E44 /* Mailbox 18 Data Word 1 [31:16] Register */ +#define CAN_MB18_DATA2 0xFFC02E48 /* Mailbox 18 Data Word 2 [47:32] Register */ +#define CAN_MB18_DATA3 0xFFC02E4C /* Mailbox 18 Data Word 3 [63:48] Register */ +#define CAN_MB18_LENGTH 0xFFC02E50 /* Mailbox 18 Data Length Code Register */ +#define CAN_MB18_TIMESTAMP 0xFFC02E54 /* Mailbox 18 Time Stamp Value Register */ +#define CAN_MB18_ID0 0xFFC02E58 /* Mailbox 18 Identifier Low Register */ +#define CAN_MB18_ID1 0xFFC02E5C /* Mailbox 18 Identifier High Register */ + +#define CAN_MB19_DATA0 0xFFC02E60 /* Mailbox 19 Data Word 0 [15:0] Register */ +#define CAN_MB19_DATA1 0xFFC02E64 /* Mailbox 19 Data Word 1 [31:16] Register */ +#define CAN_MB19_DATA2 0xFFC02E68 /* Mailbox 19 Data Word 2 [47:32] Register */ +#define CAN_MB19_DATA3 0xFFC02E6C /* Mailbox 19 Data Word 3 [63:48] Register */ +#define CAN_MB19_LENGTH 0xFFC02E70 /* Mailbox 19 Data Length Code Register */ +#define CAN_MB19_TIMESTAMP 0xFFC02E74 /* Mailbox 19 Time Stamp Value Register */ +#define CAN_MB19_ID0 0xFFC02E78 /* Mailbox 19 Identifier Low Register */ +#define CAN_MB19_ID1 0xFFC02E7C /* Mailbox 19 Identifier High Register */ + +#define CAN_MB20_DATA0 0xFFC02E80 /* Mailbox 20 Data Word 0 [15:0] Register */ +#define CAN_MB20_DATA1 0xFFC02E84 /* Mailbox 20 Data Word 1 [31:16] Register */ +#define CAN_MB20_DATA2 0xFFC02E88 /* Mailbox 20 Data Word 2 [47:32] Register */ +#define CAN_MB20_DATA3 0xFFC02E8C /* Mailbox 20 Data Word 3 [63:48] Register */ +#define CAN_MB20_LENGTH 0xFFC02E90 /* Mailbox 20 Data Length Code Register */ +#define CAN_MB20_TIMESTAMP 0xFFC02E94 /* Mailbox 20 Time Stamp Value Register */ +#define CAN_MB20_ID0 0xFFC02E98 /* Mailbox 20 Identifier Low Register */ +#define CAN_MB20_ID1 0xFFC02E9C /* Mailbox 20 Identifier High Register */ + +#define CAN_MB21_DATA0 0xFFC02EA0 /* Mailbox 21 Data Word 0 [15:0] Register */ +#define CAN_MB21_DATA1 0xFFC02EA4 /* Mailbox 21 Data Word 1 [31:16] Register */ +#define CAN_MB21_DATA2 0xFFC02EA8 /* Mailbox 21 Data Word 2 [47:32] Register */ +#define CAN_MB21_DATA3 0xFFC02EAC /* Mailbox 21 Data Word 3 [63:48] Register */ +#define CAN_MB21_LENGTH 0xFFC02EB0 /* Mailbox 21 Data Length Code Register */ +#define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* Mailbox 21 Time Stamp Value Register */ +#define CAN_MB21_ID0 0xFFC02EB8 /* Mailbox 21 Identifier Low Register */ +#define CAN_MB21_ID1 0xFFC02EBC /* Mailbox 21 Identifier High Register */ + +#define CAN_MB22_DATA0 0xFFC02EC0 /* Mailbox 22 Data Word 0 [15:0] Register */ +#define CAN_MB22_DATA1 0xFFC02EC4 /* Mailbox 22 Data Word 1 [31:16] Register */ +#define CAN_MB22_DATA2 0xFFC02EC8 /* Mailbox 22 Data Word 2 [47:32] Register */ +#define CAN_MB22_DATA3 0xFFC02ECC /* Mailbox 22 Data Word 3 [63:48] Register */ +#define CAN_MB22_LENGTH 0xFFC02ED0 /* Mailbox 22 Data Length Code Register */ +#define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* Mailbox 22 Time Stamp Value Register */ +#define CAN_MB22_ID0 0xFFC02ED8 /* Mailbox 22 Identifier Low Register */ +#define CAN_MB22_ID1 0xFFC02EDC /* Mailbox 22 Identifier High Register */ + +#define CAN_MB23_DATA0 0xFFC02EE0 /* Mailbox 23 Data Word 0 [15:0] Register */ +#define CAN_MB23_DATA1 0xFFC02EE4 /* Mailbox 23 Data Word 1 [31:16] Register */ +#define CAN_MB23_DATA2 0xFFC02EE8 /* Mailbox 23 Data Word 2 [47:32] Register */ +#define CAN_MB23_DATA3 0xFFC02EEC /* Mailbox 23 Data Word 3 [63:48] Register */ +#define CAN_MB23_LENGTH 0xFFC02EF0 /* Mailbox 23 Data Length Code Register */ +#define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* Mailbox 23 Time Stamp Value Register */ +#define CAN_MB23_ID0 0xFFC02EF8 /* Mailbox 23 Identifier Low Register */ +#define CAN_MB23_ID1 0xFFC02EFC /* Mailbox 23 Identifier High Register */ + +#define CAN_MB24_DATA0 0xFFC02F00 /* Mailbox 24 Data Word 0 [15:0] Register */ +#define CAN_MB24_DATA1 0xFFC02F04 /* Mailbox 24 Data Word 1 [31:16] Register */ +#define CAN_MB24_DATA2 0xFFC02F08 /* Mailbox 24 Data Word 2 [47:32] Register */ +#define CAN_MB24_DATA3 0xFFC02F0C /* Mailbox 24 Data Word 3 [63:48] Register */ +#define CAN_MB24_LENGTH 0xFFC02F10 /* Mailbox 24 Data Length Code Register */ +#define CAN_MB24_TIMESTAMP 0xFFC02F14 /* Mailbox 24 Time Stamp Value Register */ +#define CAN_MB24_ID0 0xFFC02F18 /* Mailbox 24 Identifier Low Register */ +#define CAN_MB24_ID1 0xFFC02F1C /* Mailbox 24 Identifier High Register */ + +#define CAN_MB25_DATA0 0xFFC02F20 /* Mailbox 25 Data Word 0 [15:0] Register */ +#define CAN_MB25_DATA1 0xFFC02F24 /* Mailbox 25 Data Word 1 [31:16] Register */ +#define CAN_MB25_DATA2 0xFFC02F28 /* Mailbox 25 Data Word 2 [47:32] Register */ +#define CAN_MB25_DATA3 0xFFC02F2C /* Mailbox 25 Data Word 3 [63:48] Register */ +#define CAN_MB25_LENGTH 0xFFC02F30 /* Mailbox 25 Data Length Code Register */ +#define CAN_MB25_TIMESTAMP 0xFFC02F34 /* Mailbox 25 Time Stamp Value Register */ +#define CAN_MB25_ID0 0xFFC02F38 /* Mailbox 25 Identifier Low Register */ +#define CAN_MB25_ID1 0xFFC02F3C /* Mailbox 25 Identifier High Register */ + +#define CAN_MB26_DATA0 0xFFC02F40 /* Mailbox 26 Data Word 0 [15:0] Register */ +#define CAN_MB26_DATA1 0xFFC02F44 /* Mailbox 26 Data Word 1 [31:16] Register */ +#define CAN_MB26_DATA2 0xFFC02F48 /* Mailbox 26 Data Word 2 [47:32] Register */ +#define CAN_MB26_DATA3 0xFFC02F4C /* Mailbox 26 Data Word 3 [63:48] Register */ +#define CAN_MB26_LENGTH 0xFFC02F50 /* Mailbox 26 Data Length Code Register */ +#define CAN_MB26_TIMESTAMP 0xFFC02F54 /* Mailbox 26 Time Stamp Value Register */ +#define CAN_MB26_ID0 0xFFC02F58 /* Mailbox 26 Identifier Low Register */ +#define CAN_MB26_ID1 0xFFC02F5C /* Mailbox 26 Identifier High Register */ + +#define CAN_MB27_DATA0 0xFFC02F60 /* Mailbox 27 Data Word 0 [15:0] Register */ +#define CAN_MB27_DATA1 0xFFC02F64 /* Mailbox 27 Data Word 1 [31:16] Register */ +#define CAN_MB27_DATA2 0xFFC02F68 /* Mailbox 27 Data Word 2 [47:32] Register */ +#define CAN_MB27_DATA3 0xFFC02F6C /* Mailbox 27 Data Word 3 [63:48] Register */ +#define CAN_MB27_LENGTH 0xFFC02F70 /* Mailbox 27 Data Length Code Register */ +#define CAN_MB27_TIMESTAMP 0xFFC02F74 /* Mailbox 27 Time Stamp Value Register */ +#define CAN_MB27_ID0 0xFFC02F78 /* Mailbox 27 Identifier Low Register */ +#define CAN_MB27_ID1 0xFFC02F7C /* Mailbox 27 Identifier High Register */ + +#define CAN_MB28_DATA0 0xFFC02F80 /* Mailbox 28 Data Word 0 [15:0] Register */ +#define CAN_MB28_DATA1 0xFFC02F84 /* Mailbox 28 Data Word 1 [31:16] Register */ +#define CAN_MB28_DATA2 0xFFC02F88 /* Mailbox 28 Data Word 2 [47:32] Register */ +#define CAN_MB28_DATA3 0xFFC02F8C /* Mailbox 28 Data Word 3 [63:48] Register */ +#define CAN_MB28_LENGTH 0xFFC02F90 /* Mailbox 28 Data Length Code Register */ +#define CAN_MB28_TIMESTAMP 0xFFC02F94 /* Mailbox 28 Time Stamp Value Register */ +#define CAN_MB28_ID0 0xFFC02F98 /* Mailbox 28 Identifier Low Register */ +#define CAN_MB28_ID1 0xFFC02F9C /* Mailbox 28 Identifier High Register */ + +#define CAN_MB29_DATA0 0xFFC02FA0 /* Mailbox 29 Data Word 0 [15:0] Register */ +#define CAN_MB29_DATA1 0xFFC02FA4 /* Mailbox 29 Data Word 1 [31:16] Register */ +#define CAN_MB29_DATA2 0xFFC02FA8 /* Mailbox 29 Data Word 2 [47:32] Register */ +#define CAN_MB29_DATA3 0xFFC02FAC /* Mailbox 29 Data Word 3 [63:48] Register */ +#define CAN_MB29_LENGTH 0xFFC02FB0 /* Mailbox 29 Data Length Code Register */ +#define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* Mailbox 29 Time Stamp Value Register */ +#define CAN_MB29_ID0 0xFFC02FB8 /* Mailbox 29 Identifier Low Register */ +#define CAN_MB29_ID1 0xFFC02FBC /* Mailbox 29 Identifier High Register */ + +#define CAN_MB30_DATA0 0xFFC02FC0 /* Mailbox 30 Data Word 0 [15:0] Register */ +#define CAN_MB30_DATA1 0xFFC02FC4 /* Mailbox 30 Data Word 1 [31:16] Register */ +#define CAN_MB30_DATA2 0xFFC02FC8 /* Mailbox 30 Data Word 2 [47:32] Register */ +#define CAN_MB30_DATA3 0xFFC02FCC /* Mailbox 30 Data Word 3 [63:48] Register */ +#define CAN_MB30_LENGTH 0xFFC02FD0 /* Mailbox 30 Data Length Code Register */ +#define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* Mailbox 30 Time Stamp Value Register */ +#define CAN_MB30_ID0 0xFFC02FD8 /* Mailbox 30 Identifier Low Register */ +#define CAN_MB30_ID1 0xFFC02FDC /* Mailbox 30 Identifier High Register */ + +#define CAN_MB31_DATA0 0xFFC02FE0 /* Mailbox 31 Data Word 0 [15:0] Register */ +#define CAN_MB31_DATA1 0xFFC02FE4 /* Mailbox 31 Data Word 1 [31:16] Register */ +#define CAN_MB31_DATA2 0xFFC02FE8 /* Mailbox 31 Data Word 2 [47:32] Register */ +#define CAN_MB31_DATA3 0xFFC02FEC /* Mailbox 31 Data Word 3 [63:48] Register */ +#define CAN_MB31_LENGTH 0xFFC02FF0 /* Mailbox 31 Data Length Code Register */ +#define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* Mailbox 31 Time Stamp Value Register */ +#define CAN_MB31_ID0 0xFFC02FF8 /* Mailbox 31 Identifier Low Register */ +#define CAN_MB31_ID1 0xFFC02FFC /* Mailbox 31 Identifier High Register */ + +/* CAN Mailbox Area Macros */ +#define CAN_MB_ID1(x) (CAN_MB00_ID1+((x)*0x20)) +#define CAN_MB_ID0(x) (CAN_MB00_ID0+((x)*0x20)) +#define CAN_MB_TIMESTAMP(x) (CAN_MB00_TIMESTAMP+((x)*0x20)) +#define CAN_MB_LENGTH(x) (CAN_MB00_LENGTH+((x)*0x20)) +#define CAN_MB_DATA3(x) (CAN_MB00_DATA3+((x)*0x20)) +#define CAN_MB_DATA2(x) (CAN_MB00_DATA2+((x)*0x20)) +#define CAN_MB_DATA1(x) (CAN_MB00_DATA1+((x)*0x20)) +#define CAN_MB_DATA0(x) (CAN_MB00_DATA0+((x)*0x20)) + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ + +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ +/* +** ********************* PLL AND RESET MASKS ****************************************/ +/* PLL_CTL Masks */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define PHYWE 0x0200 /* Enable PHY Wakeup From Hibernate */ +#define CANWE 0x0400 /* Enable CAN Wakeup From Hibernate */ +#define PHYCLKOE 0x4000 /* PHY Clock Output Enable */ +#define CKELOW 0x8000 /* Enable Drive CKE Low During Reset */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ + +/* SIC_IAR0 Macros */ +#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Macros */ +#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Macros */ +#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IAR3 Macros */ +#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ +#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ +#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ +#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ +#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ +#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ +#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ +#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ + +/* *************** WATCHDOG TIMER MASKS *******************************************/ +/* WDOG_CTL Masks */ +#define WDOG_RESET 0x0000 /* Generate Reset Event */ +#define WDOG_NMI 0x0002 /* Generate Non-Maskable Interrupt (NMI) Event */ +#define WDOG_GPI 0x0004 /* Generate General Purpose (GP) Interrupt */ +#define WDOG_NONE 0x0006 /* Disable Watchdog Timer Interrupts */ +#define TMR_EN 0x0FF0 /* Watchdog Counter Enable */ +#define TMR_DIS 0x0AD0 /* Watchdog Counter Disable */ +#define TRO 0x8000 /* Watchdog Expired */ + +/* ************** UART CONTROLLER MASKS *************************/ +/* UARTx_LCR Masks */ +#define WLS(x) ((((x)&0x3)-5) & 0x03) /* Word Length Select */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +/* UARTx_MCR Mask */ +#define LOOP 0x10 /* Loopback Mode Enable */ + +/* UARTx_LSR Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ + +/* UARTx_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ + +/* UARTx_IIR Masks */ +#define NINT 0x01 /* Pending Interrupt */ +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 + +/* UARTx_GCTL Masks */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ +/* SPI_CTL Masks */ +#define TIMOD 0x0003 /* Transfer Initiate Mode */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ +#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ +#define PSSE 0x0010 /* Slave-Select Input Enable */ +#define EMISO 0x0020 /* Enable MISO As Output */ +#define SPI_SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define LSBF 0x0200 /* LSB First */ +#define CPHA 0x0400 /* Clock Phase */ +#define CPOL 0x0800 /* Clock Polarity */ +#define MSTR 0x1000 /* Master/Slave* */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define SPE 0x4000 /* SPI Enable */ + +/* SPI_FLG Masks */ +#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ +#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ +#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ +#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ +#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ +#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ +#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ +#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ + +/* SPI_STAT Masks */ +#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ +#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ +#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ +#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ +#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ +#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ +#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ + +/* **************** GENERAL PURPOSE TIMER MASKS **********************/ +/* TIMER_ENABLE Masks */ +#define TIMEN0 0x0001 /* Enable Timer 0 */ +#define TIMEN1 0x0002 /* Enable Timer 1 */ +#define TIMEN2 0x0004 /* Enable Timer 2 */ +#define TIMEN3 0x0008 /* Enable Timer 3 */ +#define TIMEN4 0x0010 /* Enable Timer 4 */ +#define TIMEN5 0x0020 /* Enable Timer 5 */ +#define TIMEN6 0x0040 /* Enable Timer 6 */ +#define TIMEN7 0x0080 /* Enable Timer 7 */ + +/* TIMER_DISABLE Masks */ +#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ +#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ +#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ +#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ +#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ +#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ +#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ +#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ + +/* TIMER_STATUS Masks */ +#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ +#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ +#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ +#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ +#define TOVL_ERR0 0x00000010 /* Timer 0 Counter Overflow */ +#define TOVL_ERR1 0x00000020 /* Timer 1 Counter Overflow */ +#define TOVL_ERR2 0x00000040 /* Timer 2 Counter Overflow */ +#define TOVL_ERR3 0x00000080 /* Timer 3 Counter Overflow */ +#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ +#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ +#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ +#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ +#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ +#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ +#define TOVL_ERR4 0x00100000 /* Timer 4 Counter Overflow */ +#define TOVL_ERR5 0x00200000 /* Timer 5 Counter Overflow */ +#define TOVL_ERR6 0x00400000 /* Timer 6 Counter Overflow */ +#define TOVL_ERR7 0x00800000 /* Timer 7 Counter Overflow */ +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ + +/* TIMERx_CONFIG Masks */ +#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ +#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ +#define EXT_CLK 0x0003 /* External Clock Mode */ +#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ +#define PERIOD_CNT 0x0008 /* Period Count */ +#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ +#define TIN_SEL 0x0020 /* Timer Input Select */ +#define OUT_DIS 0x0040 /* Output Pad Disable */ +#define CLK_SEL 0x0080 /* Timer Clock Select */ +#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ +#define EMU_RUN 0x0200 /* Emulation Behavior Select */ +#define ERR_TYP 0xC000 /* Error Type */ + +/* ****************** GPIO PORTS F, G, H MASKS ***********************/ +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +/* Port F Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* Port G Masks */ +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* Port H Masks */ +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 +#define PH8 0x0100 +#define PH9 0x0200 +#define PH10 0x0400 +#define PH11 0x0800 +#define PH12 0x1000 +#define PH13 0x2000 +#define PH14 0x4000 +#define PH15 0x8000 + +/* ******************* SERIAL PORT MASKS **************************************/ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* Transmit Enable */ +#define ITCLK 0x0002 /* Internal Transmit Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* Transmit Bit Order */ +#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ +#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ +#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ +#define TCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks and Macro */ +#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* Receive Enable */ +#define IRCLK 0x0002 /* Internal Receive Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* Receive Bit Order */ +#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ +#define RFSR 0x0400 /* Receive Frame Sync Required Select */ +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define LARFS 0x2000 /* Late Receive Frame Sync Select */ +#define RCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ +#define RUVF 0x0002 /* Sticky Receive Underflow Status */ +#define ROVF 0x0004 /* Sticky Receive Overflow Status */ +#define TXF 0x0008 /* Transmit FIFO Full Status */ +#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ +#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ +#define TXHRE 0x0040 /* Transmit Hold Register Empty */ + +/* SPORTx_MCMC1 Macros */ +#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ + +/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/* SPORTx_MCMC2 Masks */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ + +/* EBIU_AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ +#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ +#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ +#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ +#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ +#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ +#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ + +#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ +#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ +#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ +#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ +#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ +#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ +#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ + +/* EBIU_AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ +#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ +#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ +#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ +#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ +#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ +#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ + +#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ +#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ +#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ +#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ +#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ +#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ +#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ + +/* ********************** SDRAM CONTROLLER MASKS **********************************************/ +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SDRAM Signals */ +#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ +#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ +#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ +#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ +#define EBUFE 0x02000000 /* Enable External Buffering Timing */ +#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ +#define EMREN 0x10000000 /* Extended Mode Register Enable */ +#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ +#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x0001 /* Enable SDRAM External Bank */ +#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ +#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ +#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ +#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ +#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ +#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ +#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ +#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x0001 /* SDRAM Controller Idle */ +#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ +#define SDPUA 0x0004 /* SDRAM Power-Up Active */ +#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ +#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ +#define BGSTAT 0x0020 /* Bus Grant Status */ + +/* ************************** DMA CONTROLLER MASKS ********************************/ +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x0900 /* Next Descriptor Size */ + +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ +#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ +#define PMAP_PPI 0x0000 /* PPI Port DMA */ +#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ +#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ +#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ +#define PMAP_SPI 0x7000 /* SPI Port DMA */ +#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ +#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ +#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ +#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + +/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ +/* PPI_CONTROL Masks */ +#define PORT_EN 0x0001 /* PPI Port Enable */ +#define PORT_DIR 0x0002 /* PPI Port Direction */ +#define XFR_TYPE 0x000C /* PPI Transfer Type */ +#define PORT_CFG 0x0030 /* PPI Port Configuration */ +#define FLD_SEL 0x0040 /* PPI Active Field Select */ +#define PACK_EN 0x0080 /* PPI Packing Mode */ +#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x3800 /* PPI Data Length */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x0400 /* Field Indicator */ +#define FT_ERR 0x0800 /* Frame Track Error */ +#define OVR 0x1000 /* FIFO Overflow Error */ +#define UNDR 0x2000 /* FIFO Underrun Error */ +#define ERR_DET 0x4000 /* Error Detected Indicator */ +#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ + +/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTRL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Adrress Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTRL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + +/* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/ +/* CAN_CONTROL Masks */ +#define SRS 0x0001 /* Software Reset */ +#define DNM 0x0002 /* Device Net Mode */ +#define ABO 0x0004 /* Auto-Bus On Enable */ +#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */ +#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */ +#define SMR 0x0020 /* Sleep Mode Request */ +#define CSR 0x0040 /* CAN Suspend Mode Request */ +#define CCR 0x0080 /* CAN Configuration Mode Request */ + +/* CAN_STATUS Masks */ +#define WT 0x0001 /* TX Warning Flag */ +#define WR 0x0002 /* RX Warning Flag */ +#define EP 0x0004 /* Error Passive Mode */ +#define EBO 0x0008 /* Error Bus Off Mode */ +#define SMA 0x0020 /* Sleep Mode Acknowledge */ +#define CSA 0x0040 /* Suspend Mode Acknowledge */ +#define CCA 0x0080 /* Configuration Mode Acknowledge */ +#define MBPTR 0x1F00 /* Mailbox Pointer */ +#define TRM 0x4000 /* Transmit Mode */ +#define REC 0x8000 /* Receive Mode */ + +/* CAN_CLOCK Masks */ +#define BRP 0x03FF /* Bit-Rate Pre-Scaler */ + +/* CAN_TIMING Masks */ +#define TSEG1 0x000F /* Time Segment 1 */ +#define TSEG2 0x0070 /* Time Segment 2 */ +#define SAM 0x0080 /* Sampling */ +#define SJW 0x0300 /* Synchronization Jump Width */ + +/* CAN_DEBUG Masks */ +#define DEC 0x0001 /* Disable CAN Error Counters */ +#define DRI 0x0002 /* Disable CAN RX Input */ +#define DTO 0x0004 /* Disable CAN TX Output */ +#define DIL 0x0008 /* Disable CAN Internal Loop */ +#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */ +#define MRB 0x0020 /* Mode Read Back Enable */ +#define CDE 0x8000 /* CAN Debug Enable */ + +/* CAN_CEC Masks */ +#define RXECNT 0x00FF /* Receive Error Counter */ +#define TXECNT 0xFF00 /* Transmit Error Counter */ + +/* CAN_INTR Masks */ +#define MBRIF 0x0001 /* Mailbox Receive Interrupt */ +#define MBTIF 0x0002 /* Mailbox Transmit Interrupt */ +#define GIRQ 0x0004 /* Global Interrupt */ +#define SMACK 0x0008 /* Sleep Mode Acknowledge */ +#define CANTX 0x0040 /* CAN TX Bus Value */ +#define CANRX 0x0080 /* CAN RX Bus Value */ + +/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */ +#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define IDE 0x2000 /* Identifier Extension */ +#define RTR 0x4000 /* Remote Frame Transmission Request */ +#define AME 0x8000 /* Acceptance Mask Enable */ + +/* CAN_MBxx_TIMESTAMP Masks */ +#define TSV 0xFFFF /* Timestamp */ + +/* CAN_MBxx_LENGTH Masks */ +#define DLC 0x000F /* Data Length Code */ + +/* CAN_AMxxH and CAN_AMxxL Masks */ +#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */ +#define FMD 0x4000 /* Full Mask Data Field Enable */ +#define FDF 0x8000 /* Filter On Data Field Enable */ + +/* CAN_MC1 Masks */ +#define MC0 0x0001 /* Enable Mailbox 0 */ +#define MC1 0x0002 /* Enable Mailbox 1 */ +#define MC2 0x0004 /* Enable Mailbox 2 */ +#define MC3 0x0008 /* Enable Mailbox 3 */ +#define MC4 0x0010 /* Enable Mailbox 4 */ +#define MC5 0x0020 /* Enable Mailbox 5 */ +#define MC6 0x0040 /* Enable Mailbox 6 */ +#define MC7 0x0080 /* Enable Mailbox 7 */ +#define MC8 0x0100 /* Enable Mailbox 8 */ +#define MC9 0x0200 /* Enable Mailbox 9 */ +#define MC10 0x0400 /* Enable Mailbox 10 */ +#define MC11 0x0800 /* Enable Mailbox 11 */ +#define MC12 0x1000 /* Enable Mailbox 12 */ +#define MC13 0x2000 /* Enable Mailbox 13 */ +#define MC14 0x4000 /* Enable Mailbox 14 */ +#define MC15 0x8000 /* Enable Mailbox 15 */ + +/* CAN_MC2 Masks */ +#define MC16 0x0001 /* Enable Mailbox 16 */ +#define MC17 0x0002 /* Enable Mailbox 17 */ +#define MC18 0x0004 /* Enable Mailbox 18 */ +#define MC19 0x0008 /* Enable Mailbox 19 */ +#define MC20 0x0010 /* Enable Mailbox 20 */ +#define MC21 0x0020 /* Enable Mailbox 21 */ +#define MC22 0x0040 /* Enable Mailbox 22 */ +#define MC23 0x0080 /* Enable Mailbox 23 */ +#define MC24 0x0100 /* Enable Mailbox 24 */ +#define MC25 0x0200 /* Enable Mailbox 25 */ +#define MC26 0x0400 /* Enable Mailbox 26 */ +#define MC27 0x0800 /* Enable Mailbox 27 */ +#define MC28 0x1000 /* Enable Mailbox 28 */ +#define MC29 0x2000 /* Enable Mailbox 29 */ +#define MC30 0x4000 /* Enable Mailbox 30 */ +#define MC31 0x8000 /* Enable Mailbox 31 */ + +/* CAN_MD1 Masks */ +#define MD0 0x0001 /* Enable Mailbox 0 For Receive */ +#define MD1 0x0002 /* Enable Mailbox 1 For Receive */ +#define MD2 0x0004 /* Enable Mailbox 2 For Receive */ +#define MD3 0x0008 /* Enable Mailbox 3 For Receive */ +#define MD4 0x0010 /* Enable Mailbox 4 For Receive */ +#define MD5 0x0020 /* Enable Mailbox 5 For Receive */ +#define MD6 0x0040 /* Enable Mailbox 6 For Receive */ +#define MD7 0x0080 /* Enable Mailbox 7 For Receive */ +#define MD8 0x0100 /* Enable Mailbox 8 For Receive */ +#define MD9 0x0200 /* Enable Mailbox 9 For Receive */ +#define MD10 0x0400 /* Enable Mailbox 10 For Receive */ +#define MD11 0x0800 /* Enable Mailbox 11 For Receive */ +#define MD12 0x1000 /* Enable Mailbox 12 For Receive */ +#define MD13 0x2000 /* Enable Mailbox 13 For Receive */ +#define MD14 0x4000 /* Enable Mailbox 14 For Receive */ +#define MD15 0x8000 /* Enable Mailbox 15 For Receive */ + +/* CAN_MD2 Masks */ +#define MD16 0x0001 /* Enable Mailbox 16 For Receive */ +#define MD17 0x0002 /* Enable Mailbox 17 For Receive */ +#define MD18 0x0004 /* Enable Mailbox 18 For Receive */ +#define MD19 0x0008 /* Enable Mailbox 19 For Receive */ +#define MD20 0x0010 /* Enable Mailbox 20 For Receive */ +#define MD21 0x0020 /* Enable Mailbox 21 For Receive */ +#define MD22 0x0040 /* Enable Mailbox 22 For Receive */ +#define MD23 0x0080 /* Enable Mailbox 23 For Receive */ +#define MD24 0x0100 /* Enable Mailbox 24 For Receive */ +#define MD25 0x0200 /* Enable Mailbox 25 For Receive */ +#define MD26 0x0400 /* Enable Mailbox 26 For Receive */ +#define MD27 0x0800 /* Enable Mailbox 27 For Receive */ +#define MD28 0x1000 /* Enable Mailbox 28 For Receive */ +#define MD29 0x2000 /* Enable Mailbox 29 For Receive */ +#define MD30 0x4000 /* Enable Mailbox 30 For Receive */ +#define MD31 0x8000 /* Enable Mailbox 31 For Receive */ + +/* CAN_RMP1 Masks */ +#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */ +#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */ +#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */ +#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */ +#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */ +#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */ +#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */ +#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */ +#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */ +#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */ +#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */ +#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */ +#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */ +#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */ +#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */ +#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */ + +/* CAN_RMP2 Masks */ +#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */ +#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */ +#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */ +#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */ +#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */ +#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */ +#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */ +#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */ +#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */ +#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */ +#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */ +#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */ +#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */ +#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */ +#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */ +#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */ + +/* CAN_RML1 Masks */ +#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */ +#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */ +#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */ +#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */ +#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */ +#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */ +#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */ +#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */ +#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */ +#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */ +#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */ +#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */ +#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */ +#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */ +#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */ +#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */ + +/* CAN_RML2 Masks */ +#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */ +#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */ +#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */ +#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */ +#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */ +#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */ +#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */ +#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */ +#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */ +#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */ +#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */ +#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */ +#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */ +#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */ +#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */ +#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */ + +/* CAN_OPSS1 Masks */ +#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */ +#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */ +#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */ +#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */ +#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */ +#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */ +#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */ +#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */ +#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */ +#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */ +#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */ +#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */ +#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */ +#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */ +#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */ +#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */ + +/* CAN_OPSS2 Masks */ +#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */ +#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */ +#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */ +#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */ +#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */ +#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */ +#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */ +#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */ +#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */ +#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */ +#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */ +#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */ +#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */ +#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */ +#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */ +#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */ + +/* CAN_TRR1 Masks */ +#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */ +#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */ +#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */ +#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */ +#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */ +#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */ +#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */ +#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */ +#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */ +#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */ +#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */ +#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */ +#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */ +#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */ +#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */ +#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */ + +/* CAN_TRR2 Masks */ +#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */ +#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */ +#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */ +#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */ +#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */ +#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */ +#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */ +#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */ +#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */ +#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */ +#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */ +#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */ +#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */ +#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */ +#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */ +#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */ + +/* CAN_TRS1 Masks */ +#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */ +#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */ +#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */ +#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */ +#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */ +#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */ +#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */ +#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */ +#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */ +#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */ +#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */ +#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */ +#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */ +#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */ +#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */ +#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */ + +/* CAN_TRS2 Masks */ +#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */ +#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */ +#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */ +#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */ +#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */ +#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */ +#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */ +#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */ +#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */ +#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */ +#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */ +#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */ +#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */ +#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */ +#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */ +#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */ + +/* CAN_AA1 Masks */ +#define AA0 0x0001 /* Aborted Message In Mailbox 0 */ +#define AA1 0x0002 /* Aborted Message In Mailbox 1 */ +#define AA2 0x0004 /* Aborted Message In Mailbox 2 */ +#define AA3 0x0008 /* Aborted Message In Mailbox 3 */ +#define AA4 0x0010 /* Aborted Message In Mailbox 4 */ +#define AA5 0x0020 /* Aborted Message In Mailbox 5 */ +#define AA6 0x0040 /* Aborted Message In Mailbox 6 */ +#define AA7 0x0080 /* Aborted Message In Mailbox 7 */ +#define AA8 0x0100 /* Aborted Message In Mailbox 8 */ +#define AA9 0x0200 /* Aborted Message In Mailbox 9 */ +#define AA10 0x0400 /* Aborted Message In Mailbox 10 */ +#define AA11 0x0800 /* Aborted Message In Mailbox 11 */ +#define AA12 0x1000 /* Aborted Message In Mailbox 12 */ +#define AA13 0x2000 /* Aborted Message In Mailbox 13 */ +#define AA14 0x4000 /* Aborted Message In Mailbox 14 */ +#define AA15 0x8000 /* Aborted Message In Mailbox 15 */ + +/* CAN_AA2 Masks */ +#define AA16 0x0001 /* Aborted Message In Mailbox 16 */ +#define AA17 0x0002 /* Aborted Message In Mailbox 17 */ +#define AA18 0x0004 /* Aborted Message In Mailbox 18 */ +#define AA19 0x0008 /* Aborted Message In Mailbox 19 */ +#define AA20 0x0010 /* Aborted Message In Mailbox 20 */ +#define AA21 0x0020 /* Aborted Message In Mailbox 21 */ +#define AA22 0x0040 /* Aborted Message In Mailbox 22 */ +#define AA23 0x0080 /* Aborted Message In Mailbox 23 */ +#define AA24 0x0100 /* Aborted Message In Mailbox 24 */ +#define AA25 0x0200 /* Aborted Message In Mailbox 25 */ +#define AA26 0x0400 /* Aborted Message In Mailbox 26 */ +#define AA27 0x0800 /* Aborted Message In Mailbox 27 */ +#define AA28 0x1000 /* Aborted Message In Mailbox 28 */ +#define AA29 0x2000 /* Aborted Message In Mailbox 29 */ +#define AA30 0x4000 /* Aborted Message In Mailbox 30 */ +#define AA31 0x8000 /* Aborted Message In Mailbox 31 */ + +/* CAN_TA1 Masks */ +#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */ +#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */ +#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */ +#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */ +#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */ +#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */ +#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */ +#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */ +#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */ +#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */ +#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */ +#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */ +#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */ +#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */ +#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */ +#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */ + +/* CAN_TA2 Masks */ +#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */ +#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */ +#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */ +#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */ +#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */ +#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */ +#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */ +#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */ +#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */ +#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */ +#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */ +#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */ +#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */ +#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */ +#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */ +#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */ + +/* CAN_MBTD Masks */ +#define TDPTR 0x001F /* Mailbox To Temporarily Disable */ +#define TDA 0x0040 /* Temporary Disable Acknowledge */ +#define TDR 0x0080 /* Temporary Disable Request */ + +/* CAN_RFH1 Masks */ +#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */ +#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */ +#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */ +#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */ +#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */ +#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */ +#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */ +#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */ +#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */ +#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */ +#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */ +#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */ +#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */ +#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */ +#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */ +#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */ + +/* CAN_RFH2 Masks */ +#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */ +#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */ +#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */ +#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */ +#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */ +#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */ +#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */ +#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */ +#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */ +#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */ +#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */ +#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */ +#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */ +#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */ +#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */ +#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */ + +/* CAN_MBTIF1 Masks */ +#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */ +#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */ +#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */ +#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */ +#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */ +#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */ +#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */ +#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */ +#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */ +#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */ +#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */ +#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */ +#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */ +#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */ +#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */ +#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */ + +/* CAN_MBTIF2 Masks */ +#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */ +#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */ +#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */ +#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */ +#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */ +#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */ +#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */ +#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */ +#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */ +#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */ +#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */ +#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */ +#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */ +#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */ +#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */ +#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */ + +/* CAN_MBRIF1 Masks */ +#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */ +#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */ +#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */ +#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */ +#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */ +#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */ +#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */ +#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */ +#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */ +#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */ +#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */ +#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */ +#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */ +#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */ +#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */ +#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */ + +/* CAN_MBRIF2 Masks */ +#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */ +#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */ +#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */ +#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */ +#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */ +#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */ +#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */ +#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */ +#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */ +#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */ +#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */ +#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */ +#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */ +#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */ +#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */ +#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */ + +/* CAN_MBIM1 Masks */ +#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */ +#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */ +#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */ +#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */ +#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */ +#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */ +#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */ +#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */ +#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */ +#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */ +#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */ +#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */ +#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */ +#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */ +#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */ +#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */ + +/* CAN_MBIM2 Masks */ +#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */ +#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */ +#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */ +#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */ +#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */ +#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */ +#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */ +#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */ +#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */ +#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */ +#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */ +#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */ +#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */ +#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */ +#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */ +#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */ + +/* CAN_GIM Masks */ +#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */ +#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */ +#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ +#define BOIM 0x0008 /* Enable Bus Off Interrupt */ +#define WUIM 0x0010 /* Enable Wake-Up Interrupt */ +#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */ +#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */ +#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ +#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */ +#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */ +#define ADIM 0x0400 /* Enable Access Denied Interrupt */ + +/* CAN_GIS Masks */ +#define EWTIS 0x0001 /* TX Error Count IRQ Status */ +#define EWRIS 0x0002 /* RX Error Count IRQ Status */ +#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ +#define BOIS 0x0008 /* Bus Off IRQ Status */ +#define WUIS 0x0010 /* Wake-Up IRQ Status */ +#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */ +#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */ +#define RMLIS 0x0080 /* RX Message Lost IRQ Status */ +#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */ +#define EXTIS 0x0200 /* External Trigger Output IRQ Status */ +#define ADIS 0x0400 /* Access Denied IRQ Status */ + +/* CAN_GIF Masks */ +#define EWTIF 0x0001 /* TX Error Count IRQ Flag */ +#define EWRIF 0x0002 /* RX Error Count IRQ Flag */ +#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */ +#define BOIF 0x0008 /* Bus Off IRQ Flag */ +#define WUIF 0x0010 /* Wake-Up IRQ Flag */ +#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */ +#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */ +#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */ +#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */ +#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */ +#define ADIF 0x0400 /* Access Denied IRQ Flag */ + +/* CAN_UCCNF Masks */ +#define UCCNF 0x000F /* Universal Counter Mode */ +#define UC_STAMP 0x0001 /* Timestamp Mode */ +#define UC_WDOG 0x0002 /* Watchdog Mode */ +#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */ +#define UC_ERROR 0x0006 /* CAN Error Frame Count */ +#define UC_OVER 0x0007 /* CAN Overload Frame Count */ +#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */ +#define UC_AA 0x0009 /* TX Abort Count */ +#define UC_TA 0x000A /* TX Successful Count */ +#define UC_REJECT 0x000B /* RX Message Rejected Count */ +#define UC_RML 0x000C /* RX Message Lost Count */ +#define UC_RX 0x000D /* Total Successful RX Messages Count */ +#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */ +#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */ +#define UCRC 0x0020 /* Universal Counter Reload/Clear */ +#define UCCT 0x0040 /* Universal Counter CAN Trigger */ +#define UCE 0x0080 /* Universal Counter Enable */ + +/* CAN_ESR Masks */ +#define ACKE 0x0004 /* Acknowledge Error */ +#define SER 0x0008 /* Stuff Error */ +#define CRCE 0x0010 /* CRC Error */ +#define SA0 0x0020 /* Stuck At Dominant Error */ +#define BEF 0x0040 /* Bit Error Flag */ +#define FER 0x0080 /* Form Error Flag */ + +/* CAN_EWR Masks */ +#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */ +#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */ + +/* ******************* PIN CONTROL REGISTER MASKS ************************/ +/* PORT_MUX Masks */ +#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ +#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ +#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ + +#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ +#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ +#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ +#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ + +#define PFDE 0x0008 /* Port F DMA Request Enable */ +#define PGDE_UART 0x0000 /* Enable UART0 RX/TX */ +#define PGDE_DMA 0x0008 /* Enable DMAR1:0 */ + +#define PFTE 0x0010 /* Port F Timer Enable */ +#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ +#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ + +#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ +#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ +#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ + +#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ +#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ +#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ + +#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ +#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ +#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ + +#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ +#define PFFE_TIMER 0x0000 /* Enable TMR2 */ +#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ + +#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ +#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ +#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ + +#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ +#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ +#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ + +#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ +#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ +#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ + +/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/ +/* HDMAx_CTL Masks */ +#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ +#define REP 0x0002 /* HDMA Request Polarity */ +#define UTE 0x0004 /* Urgency Threshold Enable */ +#define OIE 0x0010 /* Overflow Interrupt Enable */ +#define BDIE 0x0020 /* Block Done Interrupt Enable */ +#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ +#define DRQ 0x0300 /* HDMA Request Type */ +#define DRQ_NONE 0x0000 /* No Request */ +#define DRQ_SINGLE 0x0100 /* Channels Request Single */ +#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ +#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ +#define RBC 0x1000 /* Reload BCNT With IBCNT */ +#define PS 0x2000 /* HDMA Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +#endif /* _DEF_BF534_H */ diff --git a/include/asm-blackfin/mach-bf537/defBF537.h b/include/asm-blackfin/mach-bf537/defBF537.h new file mode 100644 index 0000000000..26f9c02eb7 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/defBF537.h @@ -0,0 +1,404 @@ +/* + * file: include/asm-blackfin/mach-bf537/defbf537.h + * based on: + * author: + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _DEF_BF537_H +#define _DEF_BF537_H + +/*include all Core registers and bit definitions*/ +#include "defBF537.h" + +/*include core specific register pointer definitions*/ +#include + +/************************************************************************************ +** Define EMAC Section Unique to BF536/BF537 +*************************************************************************************/ + +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 <= x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 <= x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 <= x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 <= x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ +/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ +/* EMAC_OPMODE Masks */ +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +#endif /* _DEF_BF537_H */ diff --git a/include/asm-blackfin/mach-bf537/dma.h b/include/asm-blackfin/mach-bf537/dma.h new file mode 100644 index 0000000000..7a96404087 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/dma.h @@ -0,0 +1,55 @@ +/* + * file: include/asm-blackfin/mach-bf537/dma.h + * based on: + * author: + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_BLACKFIN_DMA_CHANNEL 16 + +#define CH_PPI 0 +#define CH_EMAC_RX 1 +#define CH_EMAC_TX 2 +#define CH_SPORT0_RX 3 +#define CH_SPORT0_TX 4 +#define CH_SPORT1_RX 5 +#define CH_SPORT1_TX 6 +#define CH_SPI 7 +#define CH_UART0_RX 8 +#define CH_UART0_TX 9 +#define CH_UART1_RX 10 +#define CH_UART1_TX 11 + +#define CH_MEM_STREAM0_DEST 12 /* TX */ +#define CH_MEM_STREAM0_SRC 13 /* RX */ +#define CH_MEM_STREAM1_DEST 14 /* TX */ +#define CH_MEM_STREAM1_SRC 15 /* RX */ + +#endif diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h new file mode 100644 index 0000000000..8af2a832ef --- /dev/null +++ b/include/asm-blackfin/mach-bf537/irq.h @@ -0,0 +1,219 @@ +/* + * file: include/asm-blackfin/mach-bf537/irq.h + * based on: + * author: + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _BF537_IRQ_H_ +#define _BF537_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name +Core Emulation ** + Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + +..... + + Software Interrupt 1 IVG14 31 + Software Interrupt 2 -- + (lowest priority) IVG15 32 * + */ + +#define SYS_IRQS 41 +#define NR_PERI_INTS 32 + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /*Emulation */ +#define IRQ_RST 1 /*reset */ +#define IRQ_NMI 2 /*Non Maskable */ +#define IRQ_EVX 3 /*Exception */ +#define IRQ_UNUSED 4 /*- unused interrupt*/ +#define IRQ_HWERR 5 /*Hardware Error */ +#define IRQ_CORETMR 6 /*Core timer */ + +#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */ +#define IRQ_DMA_ERROR 8 /*DMA Error (general) */ +#define IRQ_GENERIC_ERROR 9 /*GENERIC Error Interrupt */ +#define IRQ_RTC 10 /*RTC Interrupt */ +#define IRQ_PPI 11 /*DMA0 Interrupt (PPI) */ +#define IRQ_SPORT0_RX 12 /*DMA3 Interrupt (SPORT0 RX) */ +#define IRQ_SPORT0_TX 13 /*DMA4 Interrupt (SPORT0 TX) */ +#define IRQ_SPORT1_RX 14 /*DMA5 Interrupt (SPORT1 RX) */ +#define IRQ_SPORT1_TX 15 /*DMA6 Interrupt (SPORT1 TX) */ +#define IRQ_TWI 16 /*TWI Interrupt */ +#define IRQ_SPI 17 /*DMA7 Interrupt (SPI) */ +#define IRQ_UART0_RX 18 /*DMA8 Interrupt (UART0 RX) */ +#define IRQ_UART0_TX 19 /*DMA9 Interrupt (UART0 TX) */ +#define IRQ_UART1_RX 20 /*DMA10 Interrupt (UART1 RX) */ +#define IRQ_UART1_TX 21 /*DMA11 Interrupt (UART1 TX) */ +#define IRQ_CAN_RX 22 /*CAN Receive Interrupt */ +#define IRQ_CAN_TX 23 /*CAN Transmit Interrupt */ +#define IRQ_MAC_RX 24 /*DMA1 (Ethernet RX) Interrupt */ +#define IRQ_MAC_TX 25 /*DMA2 (Ethernet TX) Interrupt */ +#define IRQ_TMR0 26 /*Timer 0 */ +#define IRQ_TMR1 27 /*Timer 1 */ +#define IRQ_TMR2 28 /*Timer 2 */ +#define IRQ_TMR3 29 /*Timer 3 */ +#define IRQ_TMR4 30 /*Timer 4 */ +#define IRQ_TMR5 31 /*Timer 5 */ +#define IRQ_TMR6 32 /*Timer 6 */ +#define IRQ_TMR7 33 /*Timer 7 */ +#define IRQ_PROG_INTA 34 /* PF Ports F&G (PF15:0) Interrupt A */ +#define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */ +#define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */ +#define IRQ_MEM_DMA1 37 /*(Memory DMA Stream 1) */ +#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */ +#define IRQ_WATCH 38 /*Watch Dog Timer */ +#define IRQ_SW_INT1 40 /*Software Int 1 */ +#define IRQ_SW_INT2 41 /*Software Int 2 (reserved for SYSCALL) */ + +#define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */ +#define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */ +#define IRQ_MAC_ERROR 44 /*PPI Error Interrupt */ +#define IRQ_SPORT0_ERROR 45 /*SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR 46 /*SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR 47 /*SPI Error Interrupt */ +#define IRQ_UART0_ERROR 48 /*UART Error Interrupt */ +#define IRQ_UART1_ERROR 49 /*UART Error Interrupt */ + +#define IRQ_PF0 50 +#define IRQ_PF1 51 +#define IRQ_PF2 52 +#define IRQ_PF3 53 +#define IRQ_PF4 54 +#define IRQ_PF5 55 +#define IRQ_PF6 56 +#define IRQ_PF7 57 +#define IRQ_PF8 58 +#define IRQ_PF9 59 +#define IRQ_PF10 60 +#define IRQ_PF11 61 +#define IRQ_PF12 62 +#define IRQ_PF13 63 +#define IRQ_PF14 64 +#define IRQ_PF15 65 + +#define IRQ_PG0 66 +#define IRQ_PG1 67 +#define IRQ_PG2 68 +#define IRQ_PG3 69 +#define IRQ_PG4 70 +#define IRQ_PG5 71 +#define IRQ_PG6 72 +#define IRQ_PG7 73 +#define IRQ_PG8 74 +#define IRQ_PG9 75 +#define IRQ_PG10 76 +#define IRQ_PG11 77 +#define IRQ_PG12 78 +#define IRQ_PG13 79 +#define IRQ_PG14 80 +#define IRQ_PG15 81 + +#define IRQ_PH0 82 +#define IRQ_PH1 83 +#define IRQ_PH2 84 +#define IRQ_PH3 85 +#define IRQ_PH4 86 +#define IRQ_PH5 87 +#define IRQ_PH6 88 +#define IRQ_PH7 89 +#define IRQ_PH8 90 +#define IRQ_PH9 91 +#define IRQ_PH10 92 +#define IRQ_PH11 93 +#define IRQ_PH12 94 +#define IRQ_PH13 95 +#define IRQ_PH14 96 +#define IRQ_PH15 97 + +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO +#define NR_IRQS (IRQ_PH15+1) +#else +#define NR_IRQS (IRQ_UART1_ERROR+1) +#endif + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS*/ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA_ERROR_POS 4 +#define IRQ_ERROR_POS 8 +#define IRQ_RTC_POS 12 +#define IRQ_PPI_POS 16 +#define IRQ_SPORT0_RX_POS 20 +#define IRQ_SPORT0_TX_POS 24 +#define IRQ_SPORT1_RX_POS 28 + +/* IAR1 BIT FIELDS*/ +#define IRQ_SPORT1_TX_POS 0 +#define IRQ_TWI_POS 4 +#define IRQ_SPI_POS 8 +#define IRQ_UART0_RX_POS 12 +#define IRQ_UART0_TX_POS 16 +#define IRQ_UART1_RX_POS 20 +#define IRQ_UART1_TX_POS 24 +#define IRQ_CAN_RX_POS 28 + +/* IAR2 BIT FIELDS*/ +#define IRQ_CAN_TX_POS 0 +#define IRQ_MAC_RX_POS 4 +#define IRQ_MAC_TX_POS 8 +#define IRQ_TMR0_POS 12 +#define IRQ_TMR1_POS 16 +#define IRQ_TMR2_POS 20 +#define IRQ_TMR3_POS 24 +#define IRQ_TMR4_POS 28 + +/* IAR3 BIT FIELDS*/ +#define IRQ_TMR5_POS 0 +#define IRQ_TMR6_POS 4 +#define IRQ_TMR7_POS 8 +#define IRQ_PROG_INTA_POS 12 +#define IRQ_PORTG_INTB_POS 16 +#define IRQ_MEM_DMA0_POS 20 +#define IRQ_MEM_DMA1_POS 24 +#define IRQ_WATCH_POS 28 + +#endif /* _BF537_IRQ_H_ */ diff --git a/include/asm-blackfin/mach-bf537/mem_init.h b/include/asm-blackfin/mach-bf537/mem_init.h new file mode 100644 index 0000000000..9ad979d416 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/mem_init.h @@ -0,0 +1,330 @@ +/* + * File: include/asm-blackfin/mach-bf537/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_1 +#define SDRAM_tRAS_num 1 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC16M8A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M8A2_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) + /*SDRAM INFORMATION: Modify this for your board */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_SIZE == 128) +#define SDRAM_SIZE EBSZ_128 +#endif +#if (CONFIG_MEM_SIZE == 64) +#define SDRAM_SIZE EBSZ_64 +#endif +#if (CONFIG_MEM_SIZE == 32) +#define SDRAM_SIZE EBSZ_32 +#endif +#if (CONFIG_MEM_SIZE == 16) +#define SDRAM_SIZE EBSZ_16 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 11) +#define SDRAM_WIDTH EBCAW_11 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 10) +#define SDRAM_WIDTH EBCAW_10 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 9) +#define SDRAM_WIDTH EBCAW_9 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 8) +#define SDRAM_WIDTH EBCAW_8 +#endif + +#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EBE) + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h new file mode 100644 index 0000000000..2a808c1202 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/mem_map.h @@ -0,0 +1,175 @@ +/* + * file: include/asm-blackfin/mach-bf537/mem_map.h + * based on: + * author: + * + * created: + * description: + * Memory MAP Common header file for blackfin BF537/6/4 of processors. + * rev: + * + * modified: + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MEM_MAP_537_H_ +#define _MEM_MAP_537_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 + +/* Level 1 Memory */ + +/* Memory Map for ADSP-BF537 processors */ + +#ifdef CONFIG_BLKFIN_CACHE +#define BLKFIN_ICACHESIZE (16*1024) +#else +#define BLKFIN_ICACHESIZE (0*1024) +#endif + + +#ifdef CONFIG_BF537 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0xC000 + +#ifdef CONFIG_BLKFIN_DCACHE + +#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (16*1024) +#define BLKFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BLKFIN_DCACHESIZE (32*1024) +#define BLKFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (0*1024) +#define BLKFIN_DSUPBANKS 0 +#endif /*CONFIG_BLKFIN_DCACHE*/ + +#endif /*CONFIG_BF537*/ + +/* Memory Map for ADSP-BF536 processors */ + +#ifdef CONFIG_BF536 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF804000 +#define L1_DATA_B_START 0xFF904000 + +#define L1_CODE_LENGTH 0xC000 + + +#ifdef CONFIG_BLKFIN_DCACHE + +#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH 0x4000 +#define BLKFIN_DCACHESIZE (16*1024) +#define BLKFIN_DSUPBANKS 1 + +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x4000 - 0x4000) +#define L1_DATA_B_LENGTH (0x4000 - 0x4000) +#define BLKFIN_DCACHESIZE (32*1024) +#define BLKFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x4000 +#define L1_DATA_B_LENGTH 0x4000 +#define BLKFIN_DCACHESIZE (0*1024) +#define BLKFIN_DSUPBANKS 0 +#endif /*CONFIG_BLKFIN_DCACHE*/ + +#endif + +/* Memory Map for ADSP-BF534 processors */ + +#ifdef CONFIG_BF534 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0xC000 + +#ifdef CONFIG_BLKFIN_DCACHE + +#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (16*1024) +#define BLKFIN_DSUPBANKS 1 + +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BLKFIN_DCACHESIZE (32*1024) +#define BLKFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (0*1024) +#define BLKFIN_DSUPBANKS 0 +#endif /*CONFIG_BLKFIN_DCACHE*/ + +#endif + +/* Scratch Pad Memory */ + +#if defined(CONFIG_BF537) || defined(CONFIG_BF536) || defined(CONFIG_BF534) +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 +#endif + +#endif /* _MEM_MAP_537_H_ */ diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h new file mode 100644 index 0000000000..f5b32d6651 --- /dev/null +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -0,0 +1,184 @@ + +/* + * File: include/asm-blackfin/mach-bf561/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.4 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4)) +#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4 +#endif + +/* Issues that are common to 0.5 and 0.3 silicon */ +#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not + updated at the same time. */ +#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned + memory locations */ +#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR + registers */ +#define ANOMALY_05000127 /* Signbits instruction not functional under certain + conditions */ +#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits */ +#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz + and higher devices */ +#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */ +#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */ +#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not + functional */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the + shadow of a conditional branch */ +#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop + may cause bad instruction fetches */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + external SPORT TX and RX clocks */ +#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */ +#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to increase */ +#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000274 /* Data cache write back to external synchronous memory + may be lost */ +#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */ +#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC + registers are interrupted */ + +#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */ + +#if (defined(CONFIG_BF_REV_0_5)) +#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT + mode with external clock */ +#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to + using IMDMA */ +#endif + +#if (defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input) + Mode with 0 Frame Syncs */ +#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through + cache data writes */ +#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */ +#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ +#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an + accumulator saturation */ +#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General + Purpose TX or RX modes */ +#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration + registers */ +#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with + External Frame Syncs */ +#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits + (not a meaningful mode) */ +#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer + Placement in Memory */ +#define ANOMALY_05000189 /* False Protection Exception */ +#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs + when polarity setting is changed */ +#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data + corruption */ +#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding + memory read */ +#define ANOMALY_05000199 /* DMA current address shows wrong value during carry + fix */ +#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during + inactive channels in certain conditions */ +#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG + situation */ +#define ANOMALY_05000204 /* Incorrect data read with write-through cache and + allocate cache lines on reads only mode */ +#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA + stopping */ +#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ +#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain + instructions */ +#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ +#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable + state */ +#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and + Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ +#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect + data */ +#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate + Differences in certain Conditions */ +#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ +#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in + multichannel mode */ +#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to + hardware reset */ +#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of + Control causes failures */ +#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) mode in certain conditions */ +#define ANOMALY_05000251 /* Exception not generated for MMR accesses in + reserved region */ +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12 + of the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB + exception */ +#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second + to last instruction in hardware loop */ +#define ANOMALY_05000276 /* Timing requirements change for External Frame + Sync PPI Modes with non-zero PPI_DELAY */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed + in a particular stage */ +#define ANOMALY_05000287 /* A read will receive incorrect data under certain + conditions */ +#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ +#endif + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h new file mode 100644 index 0000000000..96a5d3a47e --- /dev/null +++ b/include/asm-blackfin/mach-bf561/bf561.h @@ -0,0 +1,408 @@ +/* + * File: include/asm-blackfin/mach-bf561/bf561.h + * Based on: + * Author: + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF561_H__ +#define __MACH_BF561_H__ + +#define SUPPORTED_REVID 0x3 + +#define OFFSET_(x) ((x) & 0x0000FFFF) +#define L1_ISRAM 0xFFA00000 +#define L1_ISRAM_END 0xFFA04000 +#define DATA_BANKA_SRAM 0xFF800000 +#define DATA_BANKA_SRAM_END 0xFF804000 +#define DATA_BANKB_SRAM 0xFF900000 +#define DATA_BANKB_SRAM_END 0xFF904000 +#define L1_DSRAMA 0xFF800000 +#define L1_DSRAMA_END 0xFF804000 +#define L1_DSRAMB 0xFF900000 +#define L1_DSRAMB_END 0xFF904000 +#define L2_SRAM 0xFEB00000 +#define L2_SRAM_END 0xFEB20000 +#define AMB_FLASH 0x20000000 +#define AMB_FLASH_END 0x21000000 +#define AMB_FLASH_LENGTH 0x01000000 +#define L1_ISRAM_LENGTH 0x4000 +#define L1_DSRAMA_LENGTH 0x4000 +#define L1_DSRAMB_LENGTH 0x4000 +#define L2_SRAM_LENGTH 0x20000 + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/*************************** + * Blackfin Cache setup + */ + + +#define BLKFIN_ISUBBANKS 4 +#define BLKFIN_IWAYS 4 +#define BLKFIN_ILINES 32 + +#define BLKFIN_DSUBBANKS 4 +#define BLKFIN_DWAYS 2 +#define BLKFIN_DLINES 64 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/* IAR0 BIT FIELDS */ +#define PLL_WAKEUP_BIT 0xFFFFFFFF +#define DMA1_ERROR_BIT 0xFFFFFF0F +#define DMA2_ERROR_BIT 0xFFFFF0FF +#define IMDMA_ERROR_BIT 0xFFFF0FFF +#define PPI1_ERROR_BIT 0xFFF0FFFF +#define PPI2_ERROR_BIT 0xFF0FFFFF +#define SPORT0_ERROR_BIT 0xF0FFFFFF +#define SPORT1_ERROR_BIT 0x0FFFFFFF +/* IAR1 BIT FIELDS */ +#define SPI_ERROR_BIT 0xFFFFFFFF +#define UART_ERROR_BIT 0xFFFFFF0F +#define RESERVED_ERROR_BIT 0xFFFFF0FF +#define DMA1_0_BIT 0xFFFF0FFF +#define DMA1_1_BIT 0xFFF0FFFF +#define DMA1_2_BIT 0xFF0FFFFF +#define DMA1_3_BIT 0xF0FFFFFF +#define DMA1_4_BIT 0x0FFFFFFF +/* IAR2 BIT FIELDS */ +#define DMA1_5_BIT 0xFFFFFFFF +#define DMA1_6_BIT 0xFFFFFF0F +#define DMA1_7_BIT 0xFFFFF0FF +#define DMA1_8_BIT 0xFFFF0FFF +#define DMA1_9_BIT 0xFFF0FFFF +#define DMA1_10_BIT 0xFF0FFFFF +#define DMA1_11_BIT 0xF0FFFFFF +#define DMA2_0_BIT 0x0FFFFFFF +/* IAR3 BIT FIELDS */ +#define DMA2_1_BIT 0xFFFFFFFF +#define DMA2_2_BIT 0xFFFFFF0F +#define DMA2_3_BIT 0xFFFFF0FF +#define DMA2_4_BIT 0xFFFF0FFF +#define DMA2_5_BIT 0xFFF0FFFF +#define DMA2_6_BIT 0xFF0FFFFF +#define DMA2_7_BIT 0xF0FFFFFF +#define DMA2_8_BIT 0x0FFFFFFF +/* IAR4 BIT FIELDS */ +#define DMA2_9_BIT 0xFFFFFFFF +#define DMA2_10_BIT 0xFFFFFF0F +#define DMA2_11_BIT 0xFFFFF0FF +#define TIMER0_BIT 0xFFFF0FFF +#define TIMER1_BIT 0xFFF0FFFF +#define TIMER2_BIT 0xFF0FFFFF +#define TIMER3_BIT 0xF0FFFFFF +#define TIMER4_BIT 0x0FFFFFFF +/* IAR5 BIT FIELDS */ +#define TIMER5_BIT 0xFFFFFFFF +#define TIMER6_BIT 0xFFFFFF0F +#define TIMER7_BIT 0xFFFFF0FF +#define TIMER8_BIT 0xFFFF0FFF +#define TIMER9_BIT 0xFFF0FFFF +#define TIMER10_BIT 0xFF0FFFFF +#define TIMER11_BIT 0xF0FFFFFF +#define PROG0_INTA_BIT 0x0FFFFFFF +/* IAR6 BIT FIELDS */ +#define PROG0_INTB_BIT 0xFFFFFFFF +#define PROG1_INTA_BIT 0xFFFFFF0F +#define PROG1_INTB_BIT 0xFFFFF0FF +#define PROG2_INTA_BIT 0xFFFF0FFF +#define PROG2_INTB_BIT 0xFFF0FFFF +#define DMA1_WRRD0_BIT 0xFF0FFFFF +#define DMA1_WRRD1_BIT 0xF0FFFFFF +#define DMA2_WRRD0_BIT 0x0FFFFFFF +/* IAR7 BIT FIELDS */ +#define DMA2_WRRD1_BIT 0xFFFFFFFF +#define IMDMA_WRRD0_BIT 0xFFFFFF0F +#define IMDMA_WRRD1_BIT 0xFFFFF0FF +#define WATCH_BIT 0xFFFF0FFF +#define RESERVED_1_BIT 0xFFF0FFFF +#define RESERVED_2_BIT 0xFF0FFFFF +#define SUPPLE_0_BIT 0xF0FFFFFF +#define SUPPLE_1_BIT 0x0FFFFFFF + +/* Miscellaneous Values */ + +/****************************** EBIU Settings ********************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#if defined(CONFIG_C_AMBEN_ALL) +#define V_AMBEN AMBEN_ALL +#elif defined(CONFIG_C_AMBEN) +#define V_AMBEN 0x0 +#elif defined(CONFIG_C_AMBEN_B0) +#define V_AMBEN AMBEN_B0 +#elif defined(CONFIG_C_AMBEN_B0_B1) +#define V_AMBEN AMBEN_B0_B1 +#elif defined(CONFIG_C_AMBEN_B0_B1_B2) +#define V_AMBEN AMBEN_B0_B1_B2 +#endif + +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif + +#ifdef CONFIG_C_B0PEN +#define V_B0PEN 0x10 +#else +#define V_B0PEN 0x00 +#endif + +#ifdef CONFIG_C_B1PEN +#define V_B1PEN 0x20 +#else +#define V_B1PEN 0x00 +#endif + +#ifdef CONFIG_C_B2PEN +#define V_B2PEN 0x40 +#else +#define V_B2PEN 0x00 +#endif + +#ifdef CONFIG_C_B3PEN +#define V_B3PEN 0x80 +#else +#define V_B3PEN 0x00 +#endif + +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002) + +#define MAX_VC 600000000 +#define MIN_VC 50000000 + +/******************************* PLL Settings ********************************/ +#ifdef CONFIG_BFIN_KERNEL_CLOCK +#if (CONFIG_VCO_MULT < 0) +#error "VCO Multiplier is less than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT == 0) +#error "VCO Multiplier should be greater than 0. Please select a different value" +#endif + +#ifndef CONFIG_CLKIN_HALF +#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +#else +#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +#endif + +#ifndef CONFIG_PLL_BYPASS +#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (CONFIG_SCLK_DIV < 1) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_SCLK_DIV > 15) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_CCLK_DIV != 1) +#if (CONFIG_CCLK_DIV != 2) +#if (CONFIG_CCLK_DIV != 4) +#if (CONFIG_CCLK_DIV != 8) +#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" +#endif +#endif +#endif +#endif + +#if (CONFIG_VCO_HZ > MAX_VC) +#error "VCO selected is more than maximum value. Please change the VCO multipler" +#endif + +#if (CONFIG_SCLK_HZ > 133000000) +#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ < 27000000) +#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) +#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) +#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) +#error "Please select sclk less than cclk" +#endif +#endif +#endif + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) +#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK +#endif + +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#ifdef CONFIG_BF561 +#define CPU "BF561" +#define CPUID 0x027bb000 +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#if (CONFIG_MEM_SIZE % 4) +#error "SDRAM memory size must be a multiple of 4MB!" +#endif +#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) +#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) +#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158_WORKAROUND 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#else /*Write Through */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#endif + + +#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) +#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) +#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY) + +#define L2_MEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY) + +#define SIZE_1K 0x00000400 /* 1K */ +#define SIZE_4K 0x00001000 /* 4K */ +#define SIZE_1M 0x00100000 /* 1M */ +#define SIZE_4M 0x00400000 /* 4M */ + +#define MAX_CPLBS (16 * 2) + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* 1 for L2 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 64 for ASYNC Memory +*/ + + +#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 + 64) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* 1 for L2 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ + +#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2) + +#if 0 /* comment by mhfan */ +/* Event Vector Table Address */ +#define EVT_EMULATION_ADDR 0xffe02000 +#define EVT_RESET_ADDR 0xffe02004 +#define EVT_NMI_ADDR 0xffe02008 +#define EVT_EXCEPTION_ADDR 0xffe0200c +#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 +#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 +#define EVT_TIMER_ADDR 0xffe02018 +#define EVT_IVG7_ADDR 0xffe0201c +#define EVT_IVG8_ADDR 0xffe02020 +#define EVT_IVG9_ADDR 0xffe02024 +#define EVT_IVG10_ADDR 0xffe02028 +#define EVT_IVG11_ADDR 0xffe0202c +#define EVT_IVG12_ADDR 0xffe02030 +#define EVT_IVG13_ADDR 0xffe02034 +#define EVT_IVG14_ADDR 0xffe02038 +#define EVT_IVG15_ADDR 0xffe0203c +#define EVT_OVERRIDE_ADDR 0xffe02100 +#endif /* comment by mhfan */ + +#endif /* __MACH_BF561_H__ */ diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h new file mode 100644 index 0000000000..23bf76aa34 --- /dev/null +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -0,0 +1,108 @@ +#include +#include + +#define NR_PORTS 1 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) + +#ifdef CONFIG_BFIN_UART0_CTSRTS +# define CONFIG_SERIAL_BFIN_CTSRTS +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif +#endif + +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#else + struct work_struct cts_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int cts_pin; + int rts_pin; +#endif +}; + +struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { + 0xFFC00400, + IRQ_UART_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART_TX, + CH_UART_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif +}; + + +int nr_ports = NR_PORTS; +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, NULL); + gpio_direction_input(uart->cts_pin); + } + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, NULL); + gpio_direction_input(uart->rts_pin); + } +#endif +} diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h new file mode 100644 index 0000000000..2537c845e8 --- /dev/null +++ b/include/asm-blackfin/mach-bf561/blackfin.h @@ -0,0 +1,52 @@ +/* + * File: include/asm-blackfin/mach-bf561/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF561_FAMILY + +#include "bf561.h" +#include "mem_map.h" +#include "defBF561.h" +#include "anomaly.h" + +#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +#include "cdefBF561.h" +#endif + +#define bfin_read_FIO_FLAG_D() bfin_read_FIO0_FLAG_D() +#define bfin_write_FIO_FLAG_D(val) bfin_write_FIO0_FLAG_D(val) +#define bfin_read_FIO_DIR() bfin_read_FIO0_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_FIO0_DIR(val) +#define bfin_read_FIO_INEN() bfin_read_FIO0_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val) + +#endif /* _MACH_BLACKFIN_H_ */ diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h new file mode 100644 index 0000000000..5dc0ed8354 --- /dev/null +++ b/include/asm-blackfin/mach-bf561/cdefBF561.h @@ -0,0 +1,1543 @@ +/* + * File: include/asm-blackfin/mach-bf561/cdefBF561.h + * Based on: + * Author: + * + * Created: + * Description: C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF561_H +#define _CDEF_BF561_H + +/* +#if !defined(__ADSPBF561__) +#warning cdefBF561.h should only be included for BF561 chip. +#endif +*/ +/* include all Core registers and bit definitions */ +#include "defBF561.h" + +/*include core specific register pointer definitions*/ +#include + +#include + +/*********************************************************************************** */ +/* System MMR Register Map */ +/*********************************************************************************** */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + bfin_write16(VR_CTL, val); + __builtin_bfin_ssync(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SICA_IWR0); + /* Only allow PPL Wakeup) */ + bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + local_irq_save(flags); + asm("IDLE;"); + local_irq_restore(flags); + bfin_write32(SICA_IWR0, iwr); +} +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) + +/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ +#define bfin_read_SICA_SWRST() bfin_read16(SICA_SWRST) +#define bfin_write_SICA_SWRST(val) bfin_write16(SICA_SWRST,val) +#define bfin_read_SICA_SYSCR() bfin_read16(SICA_SYSCR) +#define bfin_write_SICA_SYSCR(val) bfin_write16(SICA_SYSCR,val) +#define bfin_read_SICA_RVECT() bfin_read16(SICA_RVECT) +#define bfin_write_SICA_RVECT(val) bfin_write16(SICA_RVECT,val) +#define bfin_read_SICA_IMASK() bfin_read32(SICA_IMASK) +#define bfin_write_SICA_IMASK(val) bfin_write32(SICA_IMASK,val) +#define bfin_read_SICA_IMASK0() bfin_read32(SICA_IMASK0) +#define bfin_write_SICA_IMASK0(val) bfin_write32(SICA_IMASK0,val) +#define bfin_read_SICA_IMASK1() bfin_read32(SICA_IMASK1) +#define bfin_write_SICA_IMASK1(val) bfin_write32(SICA_IMASK1,val) +#define bfin_read_SICA_IAR0() bfin_read32(SICA_IAR0) +#define bfin_write_SICA_IAR0(val) bfin_write32(SICA_IAR0,val) +#define bfin_read_SICA_IAR1() bfin_read32(SICA_IAR1) +#define bfin_write_SICA_IAR1(val) bfin_write32(SICA_IAR1,val) +#define bfin_read_SICA_IAR2() bfin_read32(SICA_IAR2) +#define bfin_write_SICA_IAR2(val) bfin_write32(SICA_IAR2,val) +#define bfin_read_SICA_IAR3() bfin_read32(SICA_IAR3) +#define bfin_write_SICA_IAR3(val) bfin_write32(SICA_IAR3,val) +#define bfin_read_SICA_IAR4() bfin_read32(SICA_IAR4) +#define bfin_write_SICA_IAR4(val) bfin_write32(SICA_IAR4,val) +#define bfin_read_SICA_IAR5() bfin_read32(SICA_IAR5) +#define bfin_write_SICA_IAR5(val) bfin_write32(SICA_IAR5,val) +#define bfin_read_SICA_IAR6() bfin_read32(SICA_IAR6) +#define bfin_write_SICA_IAR6(val) bfin_write32(SICA_IAR6,val) +#define bfin_read_SICA_IAR7() bfin_read32(SICA_IAR7) +#define bfin_write_SICA_IAR7(val) bfin_write32(SICA_IAR7,val) +#define bfin_read_SICA_ISR0() bfin_read32(SICA_ISR0) +#define bfin_write_SICA_ISR0(val) bfin_write32(SICA_ISR0,val) +#define bfin_read_SICA_ISR1() bfin_read32(SICA_ISR1) +#define bfin_write_SICA_ISR1(val) bfin_write32(SICA_ISR1,val) +#define bfin_read_SICA_IWR0() bfin_read32(SICA_IWR0) +#define bfin_write_SICA_IWR0(val) bfin_write32(SICA_IWR0,val) +#define bfin_read_SICA_IWR1() bfin_read32(SICA_IWR1) +#define bfin_write_SICA_IWR1(val) bfin_write32(SICA_IWR1,val) + +/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */ +#define bfin_read_SICB_SWRST() bfin_read16(SICB_SWRST) +#define bfin_write_SICB_SWRST(val) bfin_write16(SICB_SWRST,val) +#define bfin_read_SICB_SYSCR() bfin_read16(SICB_SYSCR) +#define bfin_write_SICB_SYSCR(val) bfin_write16(SICB_SYSCR,val) +#define bfin_read_SICB_RVECT() bfin_read16(SICB_RVECT) +#define bfin_write_SICB_RVECT(val) bfin_write16(SICB_RVECT,val) +#define bfin_read_SICB_IMASK0() bfin_read32(SICB_IMASK0) +#define bfin_write_SICB_IMASK0(val) bfin_write32(SICB_IMASK0,val) +#define bfin_read_SICB_IMASK1() bfin_read32(SICB_IMASK1) +#define bfin_write_SICB_IMASK1(val) bfin_write32(SICB_IMASK1,val) +#define bfin_read_SICB_IAR0() bfin_read32(SICB_IAR0) +#define bfin_write_SICB_IAR0(val) bfin_write32(SICB_IAR0,val) +#define bfin_read_SICB_IAR1() bfin_read32(SICB_IAR1) +#define bfin_write_SICB_IAR1(val) bfin_write32(SICB_IAR1,val) +#define bfin_read_SICB_IAR2() bfin_read32(SICB_IAR2) +#define bfin_write_SICB_IAR2(val) bfin_write32(SICB_IAR2,val) +#define bfin_read_SICB_IAR3() bfin_read32(SICB_IAR3) +#define bfin_write_SICB_IAR3(val) bfin_write32(SICB_IAR3,val) +#define bfin_read_SICB_IAR4() bfin_read32(SICB_IAR4) +#define bfin_write_SICB_IAR4(val) bfin_write32(SICB_IAR4,val) +#define bfin_read_SICB_IAR5() bfin_read32(SICB_IAR5) +#define bfin_write_SICB_IAR5(val) bfin_write32(SICB_IAR5,val) +#define bfin_read_SICB_IAR6() bfin_read32(SICB_IAR6) +#define bfin_write_SICB_IAR6(val) bfin_write32(SICB_IAR6,val) +#define bfin_read_SICB_IAR7() bfin_read32(SICB_IAR7) +#define bfin_write_SICB_IAR7(val) bfin_write32(SICB_IAR7,val) +#define bfin_read_SICB_ISR0() bfin_read32(SICB_ISR0) +#define bfin_write_SICB_ISR0(val) bfin_write32(SICB_ISR0,val) +#define bfin_read_SICB_ISR1() bfin_read32(SICB_ISR1) +#define bfin_write_SICB_ISR1(val) bfin_write32(SICB_ISR1,val) +#define bfin_read_SICB_IWR0() bfin_read32(SICB_IWR0) +#define bfin_write_SICB_IWR0(val) bfin_write32(SICB_IWR0,val) +#define bfin_read_SICB_IWR1() bfin_read32(SICB_IWR1) +#define bfin_write_SICB_IWR1(val) bfin_write32(SICB_IWR1,val) +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define bfin_read_WDOGA_CTL() bfin_read16(WDOGA_CTL) +#define bfin_write_WDOGA_CTL(val) bfin_write16(WDOGA_CTL,val) +#define bfin_read_WDOGA_CNT() bfin_read32(WDOGA_CNT) +#define bfin_write_WDOGA_CNT(val) bfin_write32(WDOGA_CNT,val) +#define bfin_read_WDOGA_STAT() bfin_read32(WDOGA_STAT) +#define bfin_write_WDOGA_STAT(val) bfin_write32(WDOGA_STAT,val) + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define bfin_read_WDOGB_CTL() bfin_read16(WDOGB_CTL) +#define bfin_write_WDOGB_CTL(val) bfin_write16(WDOGB_CTL,val) +#define bfin_read_WDOGB_CNT() bfin_read32(WDOGB_CNT) +#define bfin_write_WDOGB_CNT(val) bfin_write32(WDOGB_CNT,val) +#define bfin_read_WDOGB_STAT() bfin_read32(WDOGB_STAT) +#define bfin_write_WDOGB_STAT(val) bfin_write32(WDOGB_STAT,val) + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define bfin_read_UART_THR() bfin_read16(UART_THR) +#define bfin_write_UART_THR(val) bfin_write16(UART_THR,val) +#define bfin_read_UART_RBR() bfin_read16(UART_RBR) +#define bfin_write_UART_RBR(val) bfin_write16(UART_RBR,val) +#define bfin_read_UART_DLL() bfin_read16(UART_DLL) +#define bfin_write_UART_DLL(val) bfin_write16(UART_DLL,val) +#define bfin_read_UART_IER() bfin_read16(UART_IER) +#define bfin_write_UART_IER(val) bfin_write16(UART_IER,val) +#define bfin_read_UART_DLH() bfin_read16(UART_DLH) +#define bfin_write_UART_DLH(val) bfin_write16(UART_DLH,val) +#define bfin_read_UART_IIR() bfin_read16(UART_IIR) +#define bfin_write_UART_IIR(val) bfin_write16(UART_IIR,val) +#define bfin_read_UART_LCR() bfin_read16(UART_LCR) +#define bfin_write_UART_LCR(val) bfin_write16(UART_LCR,val) +#define bfin_read_UART_MCR() bfin_read16(UART_MCR) +#define bfin_write_UART_MCR(val) bfin_write16(UART_MCR,val) +#define bfin_read_UART_LSR() bfin_read16(UART_LSR) +#define bfin_write_UART_LSR(val) bfin_write16(UART_LSR,val) +#define bfin_read_UART_MSR() bfin_read16(UART_MSR) +#define bfin_write_UART_MSR(val) bfin_write16(UART_MSR,val) +#define bfin_read_UART_SCR() bfin_read16(UART_SCR) +#define bfin_write_UART_SCR(val) bfin_write16(UART_SCR,val) +#define bfin_read_UART_GCTL() bfin_read16(UART_GCTL) +#define bfin_write_UART_GCTL(val) bfin_write16(UART_GCTL,val) + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val) + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val) +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val) +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val) +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG,val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER,val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD,val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH,val) +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG,val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER,val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD,val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH,val) +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG,val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER,val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD,val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH,val) +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG,val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER,val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD,val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH,val) +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG,val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER,val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD,val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH,val) + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define bfin_read_TMRS8_ENABLE() bfin_read16(TMRS8_ENABLE) +#define bfin_write_TMRS8_ENABLE(val) bfin_write16(TMRS8_ENABLE,val) +#define bfin_read_TMRS8_DISABLE() bfin_read16(TMRS8_DISABLE) +#define bfin_write_TMRS8_DISABLE(val) bfin_write16(TMRS8_DISABLE,val) +#define bfin_read_TMRS8_STATUS() bfin_read32(TMRS8_STATUS) +#define bfin_write_TMRS8_STATUS(val) bfin_write32(TMRS8_STATUS,val) +#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) +#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG,val) +#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) +#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER,val) +#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) +#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD,val) +#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) +#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH,val) +#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) +#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG,val) +#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) +#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER,val) +#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) +#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD,val) +#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) +#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH,val) +#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) +#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG,val) +#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) +#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER,val) +#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) +#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD,val) +#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) +#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH,val) +#define bfin_read_TIMER11_CONFIG() bfin_read16(TIMER11_CONFIG) +#define bfin_write_TIMER11_CONFIG(val) bfin_write16(TIMER11_CONFIG,val) +#define bfin_read_TIMER11_COUNTER() bfin_read32(TIMER11_COUNTER) +#define bfin_write_TIMER11_COUNTER(val) bfin_write32(TIMER11_COUNTER,val) +#define bfin_read_TIMER11_PERIOD() bfin_read32(TIMER11_PERIOD) +#define bfin_write_TIMER11_PERIOD(val) bfin_write32(TIMER11_PERIOD,val) +#define bfin_read_TIMER11_WIDTH() bfin_read32(TIMER11_WIDTH) +#define bfin_write_TIMER11_WIDTH(val) bfin_write32(TIMER11_WIDTH,val) +#define bfin_read_TMRS4_ENABLE() bfin_read16(TMRS4_ENABLE) +#define bfin_write_TMRS4_ENABLE(val) bfin_write16(TMRS4_ENABLE,val) +#define bfin_read_TMRS4_DISABLE() bfin_read16(TMRS4_DISABLE) +#define bfin_write_TMRS4_DISABLE(val) bfin_write16(TMRS4_DISABLE,val) +#define bfin_read_TMRS4_STATUS() bfin_read32(TMRS4_STATUS) +#define bfin_write_TMRS4_STATUS(val) bfin_write32(TMRS4_STATUS,val) + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define bfin_read_FIO0_FLAG_D() bfin_read16(FIO0_FLAG_D) +#define bfin_write_FIO0_FLAG_D(val) bfin_write16(FIO0_FLAG_D,val) +#define bfin_read_FIO0_FLAG_C() bfin_read16(FIO0_FLAG_C) +#define bfin_write_FIO0_FLAG_C(val) bfin_write16(FIO0_FLAG_C,val) +#define bfin_read_FIO0_FLAG_S() bfin_read16(FIO0_FLAG_S) +#define bfin_write_FIO0_FLAG_S(val) bfin_write16(FIO0_FLAG_S,val) +#define bfin_read_FIO0_FLAG_T() bfin_read16(FIO0_FLAG_T) +#define bfin_write_FIO0_FLAG_T(val) bfin_write16(FIO0_FLAG_T,val) +#define bfin_read_FIO0_MASKA_D() bfin_read16(FIO0_MASKA_D) +#define bfin_write_FIO0_MASKA_D(val) bfin_write16(FIO0_MASKA_D,val) +#define bfin_read_FIO0_MASKA_C() bfin_read16(FIO0_MASKA_C) +#define bfin_write_FIO0_MASKA_C(val) bfin_write16(FIO0_MASKA_C,val) +#define bfin_read_FIO0_MASKA_S() bfin_read16(FIO0_MASKA_S) +#define bfin_write_FIO0_MASKA_S(val) bfin_write16(FIO0_MASKA_S,val) +#define bfin_read_FIO0_MASKA_T() bfin_read16(FIO0_MASKA_T) +#define bfin_write_FIO0_MASKA_T(val) bfin_write16(FIO0_MASKA_T,val) +#define bfin_read_FIO0_MASKB_D() bfin_read16(FIO0_MASKB_D) +#define bfin_write_FIO0_MASKB_D(val) bfin_write16(FIO0_MASKB_D,val) +#define bfin_read_FIO0_MASKB_C() bfin_read16(FIO0_MASKB_C) +#define bfin_write_FIO0_MASKB_C(val) bfin_write16(FIO0_MASKB_C,val) +#define bfin_read_FIO0_MASKB_S() bfin_read16(FIO0_MASKB_S) +#define bfin_write_FIO0_MASKB_S(val) bfin_write16(FIO0_MASKB_S,val) +#define bfin_read_FIO0_MASKB_T() bfin_read16(FIO0_MASKB_T) +#define bfin_write_FIO0_MASKB_T(val) bfin_write16(FIO0_MASKB_T,val) +#define bfin_read_FIO0_DIR() bfin_read16(FIO0_DIR) +#define bfin_write_FIO0_DIR(val) bfin_write16(FIO0_DIR,val) +#define bfin_read_FIO0_POLAR() bfin_read16(FIO0_POLAR) +#define bfin_write_FIO0_POLAR(val) bfin_write16(FIO0_POLAR,val) +#define bfin_read_FIO0_EDGE() bfin_read16(FIO0_EDGE) +#define bfin_write_FIO0_EDGE(val) bfin_write16(FIO0_EDGE,val) +#define bfin_read_FIO0_BOTH() bfin_read16(FIO0_BOTH) +#define bfin_write_FIO0_BOTH(val) bfin_write16(FIO0_BOTH,val) +#define bfin_read_FIO0_INEN() bfin_read16(FIO0_INEN) +#define bfin_write_FIO0_INEN(val) bfin_write16(FIO0_INEN,val) +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define bfin_read_FIO1_FLAG_D() bfin_read16(FIO1_FLAG_D) +#define bfin_write_FIO1_FLAG_D(val) bfin_write16(FIO1_FLAG_D,val) +#define bfin_read_FIO1_FLAG_C() bfin_read16(FIO1_FLAG_C) +#define bfin_write_FIO1_FLAG_C(val) bfin_write16(FIO1_FLAG_C,val) +#define bfin_read_FIO1_FLAG_S() bfin_read16(FIO1_FLAG_S) +#define bfin_write_FIO1_FLAG_S(val) bfin_write16(FIO1_FLAG_S,val) +#define bfin_read_FIO1_FLAG_T() bfin_read16(FIO1_FLAG_T) +#define bfin_write_FIO1_FLAG_T(val) bfin_write16(FIO1_FLAG_T,val) +#define bfin_read_FIO1_MASKA_D() bfin_read16(FIO1_MASKA_D) +#define bfin_write_FIO1_MASKA_D(val) bfin_write16(FIO1_MASKA_D,val) +#define bfin_read_FIO1_MASKA_C() bfin_read16(FIO1_MASKA_C) +#define bfin_write_FIO1_MASKA_C(val) bfin_write16(FIO1_MASKA_C,val) +#define bfin_read_FIO1_MASKA_S() bfin_read16(FIO1_MASKA_S) +#define bfin_write_FIO1_MASKA_S(val) bfin_write16(FIO1_MASKA_S,val) +#define bfin_read_FIO1_MASKA_T() bfin_read16(FIO1_MASKA_T) +#define bfin_write_FIO1_MASKA_T(val) bfin_write16(FIO1_MASKA_T,val) +#define bfin_read_FIO1_MASKB_D() bfin_read16(FIO1_MASKB_D) +#define bfin_write_FIO1_MASKB_D(val) bfin_write16(FIO1_MASKB_D,val) +#define bfin_read_FIO1_MASKB_C() bfin_read16(FIO1_MASKB_C) +#define bfin_write_FIO1_MASKB_C(val) bfin_write16(FIO1_MASKB_C,val) +#define bfin_read_FIO1_MASKB_S() bfin_read16(FIO1_MASKB_S) +#define bfin_write_FIO1_MASKB_S(val) bfin_write16(FIO1_MASKB_S,val) +#define bfin_read_FIO1_MASKB_T() bfin_read16(FIO1_MASKB_T) +#define bfin_write_FIO1_MASKB_T(val) bfin_write16(FIO1_MASKB_T,val) +#define bfin_read_FIO1_DIR() bfin_read16(FIO1_DIR) +#define bfin_write_FIO1_DIR(val) bfin_write16(FIO1_DIR,val) +#define bfin_read_FIO1_POLAR() bfin_read16(FIO1_POLAR) +#define bfin_write_FIO1_POLAR(val) bfin_write16(FIO1_POLAR,val) +#define bfin_read_FIO1_EDGE() bfin_read16(FIO1_EDGE) +#define bfin_write_FIO1_EDGE(val) bfin_write16(FIO1_EDGE,val) +#define bfin_read_FIO1_BOTH() bfin_read16(FIO1_BOTH) +#define bfin_write_FIO1_BOTH(val) bfin_write16(FIO1_BOTH,val) +#define bfin_read_FIO1_INEN() bfin_read16(FIO1_INEN) +#define bfin_write_FIO1_INEN(val) bfin_write16(FIO1_INEN,val) +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define bfin_read_FIO2_FLAG_D() bfin_read16(FIO2_FLAG_D) +#define bfin_write_FIO2_FLAG_D(val) bfin_write16(FIO2_FLAG_D,val) +#define bfin_read_FIO2_FLAG_C() bfin_read16(FIO2_FLAG_C) +#define bfin_write_FIO2_FLAG_C(val) bfin_write16(FIO2_FLAG_C,val) +#define bfin_read_FIO2_FLAG_S() bfin_read16(FIO2_FLAG_S) +#define bfin_write_FIO2_FLAG_S(val) bfin_write16(FIO2_FLAG_S,val) +#define bfin_read_FIO2_FLAG_T() bfin_read16(FIO2_FLAG_T) +#define bfin_write_FIO2_FLAG_T(val) bfin_write16(FIO2_FLAG_T,val) +#define bfin_read_FIO2_MASKA_D() bfin_read16(FIO2_MASKA_D) +#define bfin_write_FIO2_MASKA_D(val) bfin_write16(FIO2_MASKA_D,val) +#define bfin_read_FIO2_MASKA_C() bfin_read16(FIO2_MASKA_C) +#define bfin_write_FIO2_MASKA_C(val) bfin_write16(FIO2_MASKA_C,val) +#define bfin_read_FIO2_MASKA_S() bfin_read16(FIO2_MASKA_S) +#define bfin_write_FIO2_MASKA_S(val) bfin_write16(FIO2_MASKA_S,val) +#define bfin_read_FIO2_MASKA_T() bfin_read16(FIO2_MASKA_T) +#define bfin_write_FIO2_MASKA_T(val) bfin_write16(FIO2_MASKA_T,val) +#define bfin_read_FIO2_MASKB_D() bfin_read16(FIO2_MASKB_D) +#define bfin_write_FIO2_MASKB_D(val) bfin_write16(FIO2_MASKB_D,val) +#define bfin_read_FIO2_MASKB_C() bfin_read16(FIO2_MASKB_C) +#define bfin_write_FIO2_MASKB_C(val) bfin_write16(FIO2_MASKB_C,val) +#define bfin_read_FIO2_MASKB_S() bfin_read16(FIO2_MASKB_S) +#define bfin_write_FIO2_MASKB_S(val) bfin_write16(FIO2_MASKB_S,val) +#define bfin_read_FIO2_MASKB_T() bfin_read16(FIO2_MASKB_T) +#define bfin_write_FIO2_MASKB_T(val) bfin_write16(FIO2_MASKB_T,val) +#define bfin_read_FIO2_DIR() bfin_read16(FIO2_DIR) +#define bfin_write_FIO2_DIR(val) bfin_write16(FIO2_DIR,val) +#define bfin_read_FIO2_POLAR() bfin_read16(FIO2_POLAR) +#define bfin_write_FIO2_POLAR(val) bfin_write16(FIO2_POLAR,val) +#define bfin_read_FIO2_EDGE() bfin_read16(FIO2_EDGE) +#define bfin_write_FIO2_EDGE(val) bfin_write16(FIO2_EDGE,val) +#define bfin_read_FIO2_BOTH() bfin_read16(FIO2_BOTH) +#define bfin_write_FIO2_BOTH(val) bfin_write16(FIO2_BOTH,val) +#define bfin_read_FIO2_INEN() bfin_read16(FIO2_INEN) +#define bfin_write_FIO2_INEN(val) bfin_write16(FIO2_INEN,val) +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val) +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val) +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val) +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val) +#define bfin_read_EBIU_SDBCTL() bfin_read32(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write32(EBIU_SDBCTL,val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val) +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define bfin_read_PPI0_CONTROL() bfin_read16(PPI0_CONTROL) +#define bfin_write_PPI0_CONTROL(val) bfin_write16(PPI0_CONTROL,val) +#define bfin_read_PPI0_STATUS() bfin_read16(PPI0_STATUS) +#define bfin_write_PPI0_STATUS(val) bfin_write16(PPI0_STATUS,val) +#define bfin_read_PPI0_COUNT() bfin_read16(PPI0_COUNT) +#define bfin_write_PPI0_COUNT(val) bfin_write16(PPI0_COUNT,val) +#define bfin_read_PPI0_DELAY() bfin_read16(PPI0_DELAY) +#define bfin_write_PPI0_DELAY(val) bfin_write16(PPI0_DELAY,val) +#define bfin_read_PPI0_FRAME() bfin_read16(PPI0_FRAME) +#define bfin_write_PPI0_FRAME(val) bfin_write16(PPI0_FRAME,val) +/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */ +#define bfin_read_PPI1_CONTROL() bfin_read16(PPI1_CONTROL) +#define bfin_write_PPI1_CONTROL(val) bfin_write16(PPI1_CONTROL,val) +#define bfin_read_PPI1_STATUS() bfin_read16(PPI1_STATUS) +#define bfin_write_PPI1_STATUS(val) bfin_write16(PPI1_STATUS,val) +#define bfin_read_PPI1_COUNT() bfin_read16(PPI1_COUNT) +#define bfin_write_PPI1_COUNT(val) bfin_write16(PPI1_COUNT,val) +#define bfin_read_PPI1_DELAY() bfin_read16(PPI1_DELAY) +#define bfin_write_PPI1_DELAY(val) bfin_write16(PPI1_DELAY,val) +#define bfin_read_PPI1_FRAME() bfin_read16(PPI1_FRAME) +#define bfin_write_PPI1_FRAME(val) bfin_write16(PPI1_FRAME,val) +/*DMA traffic control registers */ +#define bfin_read_DMA1_TC_PER() bfin_read16(DMA1_TC_PER) +#define bfin_write_DMA1_TC_PER(val) bfin_write16(DMA1_TC_PER,val) +#define bfin_read_DMA1_TC_CNT() bfin_read16(DMA1_TC_CNT) +#define bfin_write_DMA1_TC_CNT(val) bfin_write16(DMA1_TC_CNT,val) +#define bfin_read_DMA2_TC_PER() bfin_read16(DMA2_TC_PER) +#define bfin_write_DMA2_TC_PER(val) bfin_write16(DMA2_TC_PER,val) +#define bfin_read_DMA2_TC_CNT() bfin_read16(DMA2_TC_CNT) +#define bfin_write_DMA2_TC_CNT(val) bfin_write16(DMA2_TC_CNT,val) +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define bfin_read_DMA1_0_CONFIG() bfin_read16(DMA1_0_CONFIG) +#define bfin_write_DMA1_0_CONFIG(val) bfin_write16(DMA1_0_CONFIG,val) +#define bfin_read_DMA1_0_NEXT_DESC_PTR() bfin_read32(DMA1_0_NEXT_DESC_PTR) +#define bfin_write_DMA1_0_NEXT_DESC_PTR(val) bfin_write32(DMA1_0_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_0_START_ADDR() bfin_read32(DMA1_0_START_ADDR) +#define bfin_write_DMA1_0_START_ADDR(val) bfin_write32(DMA1_0_START_ADDR,val) +#define bfin_read_DMA1_0_X_COUNT() bfin_read16(DMA1_0_X_COUNT) +#define bfin_write_DMA1_0_X_COUNT(val) bfin_write16(DMA1_0_X_COUNT,val) +#define bfin_read_DMA1_0_Y_COUNT() bfin_read16(DMA1_0_Y_COUNT) +#define bfin_write_DMA1_0_Y_COUNT(val) bfin_write16(DMA1_0_Y_COUNT,val) +#define bfin_read_DMA1_0_X_MODIFY() bfin_read16(DMA1_0_X_MODIFY) +#define bfin_write_DMA1_0_X_MODIFY(val) bfin_write16(DMA1_0_X_MODIFY,val) +#define bfin_read_DMA1_0_Y_MODIFY() bfin_read16(DMA1_0_Y_MODIFY) +#define bfin_write_DMA1_0_Y_MODIFY(val) bfin_write16(DMA1_0_Y_MODIFY,val) +#define bfin_read_DMA1_0_CURR_DESC_PTR() bfin_read32(DMA1_0_CURR_DESC_PTR) +#define bfin_write_DMA1_0_CURR_DESC_PTR(val) bfin_write32(DMA1_0_CURR_DESC_PTR,val) +#define bfin_read_DMA1_0_CURR_ADDR() bfin_read32(DMA1_0_CURR_ADDR) +#define bfin_write_DMA1_0_CURR_ADDR(val) bfin_write32(DMA1_0_CURR_ADDR,val) +#define bfin_read_DMA1_0_CURR_X_COUNT() bfin_read16(DMA1_0_CURR_X_COUNT) +#define bfin_write_DMA1_0_CURR_X_COUNT(val) bfin_write16(DMA1_0_CURR_X_COUNT,val) +#define bfin_read_DMA1_0_CURR_Y_COUNT() bfin_read16(DMA1_0_CURR_Y_COUNT) +#define bfin_write_DMA1_0_CURR_Y_COUNT(val) bfin_write16(DMA1_0_CURR_Y_COUNT,val) +#define bfin_read_DMA1_0_IRQ_STATUS() bfin_read16(DMA1_0_IRQ_STATUS) +#define bfin_write_DMA1_0_IRQ_STATUS(val) bfin_write16(DMA1_0_IRQ_STATUS,val) +#define bfin_read_DMA1_0_PERIPHERAL_MAP() bfin_read16(DMA1_0_PERIPHERAL_MAP) +#define bfin_write_DMA1_0_PERIPHERAL_MAP(val) bfin_write16(DMA1_0_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_1_CONFIG() bfin_read16(DMA1_1_CONFIG) +#define bfin_write_DMA1_1_CONFIG(val) bfin_write16(DMA1_1_CONFIG,val) +#define bfin_read_DMA1_1_NEXT_DESC_PTR() bfin_read32(DMA1_1_NEXT_DESC_PTR) +#define bfin_write_DMA1_1_NEXT_DESC_PTR(val) bfin_write32(DMA1_1_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_1_START_ADDR() bfin_read32(DMA1_1_START_ADDR) +#define bfin_write_DMA1_1_START_ADDR(val) bfin_write32(DMA1_1_START_ADDR,val) +#define bfin_read_DMA1_1_X_COUNT() bfin_read16(DMA1_1_X_COUNT) +#define bfin_write_DMA1_1_X_COUNT(val) bfin_write16(DMA1_1_X_COUNT,val) +#define bfin_read_DMA1_1_Y_COUNT() bfin_read16(DMA1_1_Y_COUNT) +#define bfin_write_DMA1_1_Y_COUNT(val) bfin_write16(DMA1_1_Y_COUNT,val) +#define bfin_read_DMA1_1_X_MODIFY() bfin_read16(DMA1_1_X_MODIFY) +#define bfin_write_DMA1_1_X_MODIFY(val) bfin_write16(DMA1_1_X_MODIFY,val) +#define bfin_read_DMA1_1_Y_MODIFY() bfin_read16(DMA1_1_Y_MODIFY) +#define bfin_write_DMA1_1_Y_MODIFY(val) bfin_write16(DMA1_1_Y_MODIFY,val) +#define bfin_read_DMA1_1_CURR_DESC_PTR() bfin_read32(DMA1_1_CURR_DESC_PTR) +#define bfin_write_DMA1_1_CURR_DESC_PTR(val) bfin_write32(DMA1_1_CURR_DESC_PTR,val) +#define bfin_read_DMA1_1_CURR_ADDR() bfin_read32(DMA1_1_CURR_ADDR) +#define bfin_write_DMA1_1_CURR_ADDR(val) bfin_write32(DMA1_1_CURR_ADDR,val) +#define bfin_read_DMA1_1_CURR_X_COUNT() bfin_read16(DMA1_1_CURR_X_COUNT) +#define bfin_write_DMA1_1_CURR_X_COUNT(val) bfin_write16(DMA1_1_CURR_X_COUNT,val) +#define bfin_read_DMA1_1_CURR_Y_COUNT() bfin_read16(DMA1_1_CURR_Y_COUNT) +#define bfin_write_DMA1_1_CURR_Y_COUNT(val) bfin_write16(DMA1_1_CURR_Y_COUNT,val) +#define bfin_read_DMA1_1_IRQ_STATUS() bfin_read16(DMA1_1_IRQ_STATUS) +#define bfin_write_DMA1_1_IRQ_STATUS(val) bfin_write16(DMA1_1_IRQ_STATUS,val) +#define bfin_read_DMA1_1_PERIPHERAL_MAP() bfin_read16(DMA1_1_PERIPHERAL_MAP) +#define bfin_write_DMA1_1_PERIPHERAL_MAP(val) bfin_write16(DMA1_1_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_2_CONFIG() bfin_read16(DMA1_2_CONFIG) +#define bfin_write_DMA1_2_CONFIG(val) bfin_write16(DMA1_2_CONFIG,val) +#define bfin_read_DMA1_2_NEXT_DESC_PTR() bfin_read32(DMA1_2_NEXT_DESC_PTR) +#define bfin_write_DMA1_2_NEXT_DESC_PTR(val) bfin_write32(DMA1_2_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_2_START_ADDR() bfin_read32(DMA1_2_START_ADDR) +#define bfin_write_DMA1_2_START_ADDR(val) bfin_write32(DMA1_2_START_ADDR,val) +#define bfin_read_DMA1_2_X_COUNT() bfin_read16(DMA1_2_X_COUNT) +#define bfin_write_DMA1_2_X_COUNT(val) bfin_write16(DMA1_2_X_COUNT,val) +#define bfin_read_DMA1_2_Y_COUNT() bfin_read16(DMA1_2_Y_COUNT) +#define bfin_write_DMA1_2_Y_COUNT(val) bfin_write16(DMA1_2_Y_COUNT,val) +#define bfin_read_DMA1_2_X_MODIFY() bfin_read16(DMA1_2_X_MODIFY) +#define bfin_write_DMA1_2_X_MODIFY(val) bfin_write16(DMA1_2_X_MODIFY,val) +#define bfin_read_DMA1_2_Y_MODIFY() bfin_read16(DMA1_2_Y_MODIFY) +#define bfin_write_DMA1_2_Y_MODIFY(val) bfin_write16(DMA1_2_Y_MODIFY,val) +#define bfin_read_DMA1_2_CURR_DESC_PTR() bfin_read32(DMA1_2_CURR_DESC_PTR) +#define bfin_write_DMA1_2_CURR_DESC_PTR(val) bfin_write32(DMA1_2_CURR_DESC_PTR,val) +#define bfin_read_DMA1_2_CURR_ADDR() bfin_read32(DMA1_2_CURR_ADDR) +#define bfin_write_DMA1_2_CURR_ADDR(val) bfin_write32(DMA1_2_CURR_ADDR,val) +#define bfin_read_DMA1_2_CURR_X_COUNT() bfin_read16(DMA1_2_CURR_X_COUNT) +#define bfin_write_DMA1_2_CURR_X_COUNT(val) bfin_write16(DMA1_2_CURR_X_COUNT,val) +#define bfin_read_DMA1_2_CURR_Y_COUNT() bfin_read16(DMA1_2_CURR_Y_COUNT) +#define bfin_write_DMA1_2_CURR_Y_COUNT(val) bfin_write16(DMA1_2_CURR_Y_COUNT,val) +#define bfin_read_DMA1_2_IRQ_STATUS() bfin_read16(DMA1_2_IRQ_STATUS) +#define bfin_write_DMA1_2_IRQ_STATUS(val) bfin_write16(DMA1_2_IRQ_STATUS,val) +#define bfin_read_DMA1_2_PERIPHERAL_MAP() bfin_read16(DMA1_2_PERIPHERAL_MAP) +#define bfin_write_DMA1_2_PERIPHERAL_MAP(val) bfin_write16(DMA1_2_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_3_CONFIG() bfin_read16(DMA1_3_CONFIG) +#define bfin_write_DMA1_3_CONFIG(val) bfin_write16(DMA1_3_CONFIG,val) +#define bfin_read_DMA1_3_NEXT_DESC_PTR() bfin_read32(DMA1_3_NEXT_DESC_PTR) +#define bfin_write_DMA1_3_NEXT_DESC_PTR(val) bfin_write32(DMA1_3_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_3_START_ADDR() bfin_read32(DMA1_3_START_ADDR) +#define bfin_write_DMA1_3_START_ADDR(val) bfin_write32(DMA1_3_START_ADDR,val) +#define bfin_read_DMA1_3_X_COUNT() bfin_read16(DMA1_3_X_COUNT) +#define bfin_write_DMA1_3_X_COUNT(val) bfin_write16(DMA1_3_X_COUNT,val) +#define bfin_read_DMA1_3_Y_COUNT() bfin_read16(DMA1_3_Y_COUNT) +#define bfin_write_DMA1_3_Y_COUNT(val) bfin_write16(DMA1_3_Y_COUNT,val) +#define bfin_read_DMA1_3_X_MODIFY() bfin_read16(DMA1_3_X_MODIFY) +#define bfin_write_DMA1_3_X_MODIFY(val) bfin_write16(DMA1_3_X_MODIFY,val) +#define bfin_read_DMA1_3_Y_MODIFY() bfin_read16(DMA1_3_Y_MODIFY) +#define bfin_write_DMA1_3_Y_MODIFY(val) bfin_write16(DMA1_3_Y_MODIFY,val) +#define bfin_read_DMA1_3_CURR_DESC_PTR() bfin_read32(DMA1_3_CURR_DESC_PTR) +#define bfin_write_DMA1_3_CURR_DESC_PTR(val) bfin_write32(DMA1_3_CURR_DESC_PTR,val) +#define bfin_read_DMA1_3_CURR_ADDR() bfin_read32(DMA1_3_CURR_ADDR) +#define bfin_write_DMA1_3_CURR_ADDR(val) bfin_write32(DMA1_3_CURR_ADDR,val) +#define bfin_read_DMA1_3_CURR_X_COUNT() bfin_read16(DMA1_3_CURR_X_COUNT) +#define bfin_write_DMA1_3_CURR_X_COUNT(val) bfin_write16(DMA1_3_CURR_X_COUNT,val) +#define bfin_read_DMA1_3_CURR_Y_COUNT() bfin_read16(DMA1_3_CURR_Y_COUNT) +#define bfin_write_DMA1_3_CURR_Y_COUNT(val) bfin_write16(DMA1_3_CURR_Y_COUNT,val) +#define bfin_read_DMA1_3_IRQ_STATUS() bfin_read16(DMA1_3_IRQ_STATUS) +#define bfin_write_DMA1_3_IRQ_STATUS(val) bfin_write16(DMA1_3_IRQ_STATUS,val) +#define bfin_read_DMA1_3_PERIPHERAL_MAP() bfin_read16(DMA1_3_PERIPHERAL_MAP) +#define bfin_write_DMA1_3_PERIPHERAL_MAP(val) bfin_write16(DMA1_3_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_4_CONFIG() bfin_read16(DMA1_4_CONFIG) +#define bfin_write_DMA1_4_CONFIG(val) bfin_write16(DMA1_4_CONFIG,val) +#define bfin_read_DMA1_4_NEXT_DESC_PTR() bfin_read32(DMA1_4_NEXT_DESC_PTR) +#define bfin_write_DMA1_4_NEXT_DESC_PTR(val) bfin_write32(DMA1_4_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_4_START_ADDR() bfin_read32(DMA1_4_START_ADDR) +#define bfin_write_DMA1_4_START_ADDR(val) bfin_write32(DMA1_4_START_ADDR,val) +#define bfin_read_DMA1_4_X_COUNT() bfin_read16(DMA1_4_X_COUNT) +#define bfin_write_DMA1_4_X_COUNT(val) bfin_write16(DMA1_4_X_COUNT,val) +#define bfin_read_DMA1_4_Y_COUNT() bfin_read16(DMA1_4_Y_COUNT) +#define bfin_write_DMA1_4_Y_COUNT(val) bfin_write16(DMA1_4_Y_COUNT,val) +#define bfin_read_DMA1_4_X_MODIFY() bfin_read16(DMA1_4_X_MODIFY) +#define bfin_write_DMA1_4_X_MODIFY(val) bfin_write16(DMA1_4_X_MODIFY,val) +#define bfin_read_DMA1_4_Y_MODIFY() bfin_read16(DMA1_4_Y_MODIFY) +#define bfin_write_DMA1_4_Y_MODIFY(val) bfin_write16(DMA1_4_Y_MODIFY,val) +#define bfin_read_DMA1_4_CURR_DESC_PTR() bfin_read32(DMA1_4_CURR_DESC_PTR) +#define bfin_write_DMA1_4_CURR_DESC_PTR(val) bfin_write32(DMA1_4_CURR_DESC_PTR,val) +#define bfin_read_DMA1_4_CURR_ADDR() bfin_read32(DMA1_4_CURR_ADDR) +#define bfin_write_DMA1_4_CURR_ADDR(val) bfin_write32(DMA1_4_CURR_ADDR,val) +#define bfin_read_DMA1_4_CURR_X_COUNT() bfin_read16(DMA1_4_CURR_X_COUNT) +#define bfin_write_DMA1_4_CURR_X_COUNT(val) bfin_write16(DMA1_4_CURR_X_COUNT,val) +#define bfin_read_DMA1_4_CURR_Y_COUNT() bfin_read16(DMA1_4_CURR_Y_COUNT) +#define bfin_write_DMA1_4_CURR_Y_COUNT(val) bfin_write16(DMA1_4_CURR_Y_COUNT,val) +#define bfin_read_DMA1_4_IRQ_STATUS() bfin_read16(DMA1_4_IRQ_STATUS) +#define bfin_write_DMA1_4_IRQ_STATUS(val) bfin_write16(DMA1_4_IRQ_STATUS,val) +#define bfin_read_DMA1_4_PERIPHERAL_MAP() bfin_read16(DMA1_4_PERIPHERAL_MAP) +#define bfin_write_DMA1_4_PERIPHERAL_MAP(val) bfin_write16(DMA1_4_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_5_CONFIG() bfin_read16(DMA1_5_CONFIG) +#define bfin_write_DMA1_5_CONFIG(val) bfin_write16(DMA1_5_CONFIG,val) +#define bfin_read_DMA1_5_NEXT_DESC_PTR() bfin_read32(DMA1_5_NEXT_DESC_PTR) +#define bfin_write_DMA1_5_NEXT_DESC_PTR(val) bfin_write32(DMA1_5_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_5_START_ADDR() bfin_read32(DMA1_5_START_ADDR) +#define bfin_write_DMA1_5_START_ADDR(val) bfin_write32(DMA1_5_START_ADDR,val) +#define bfin_read_DMA1_5_X_COUNT() bfin_read16(DMA1_5_X_COUNT) +#define bfin_write_DMA1_5_X_COUNT(val) bfin_write16(DMA1_5_X_COUNT,val) +#define bfin_read_DMA1_5_Y_COUNT() bfin_read16(DMA1_5_Y_COUNT) +#define bfin_write_DMA1_5_Y_COUNT(val) bfin_write16(DMA1_5_Y_COUNT,val) +#define bfin_read_DMA1_5_X_MODIFY() bfin_read16(DMA1_5_X_MODIFY) +#define bfin_write_DMA1_5_X_MODIFY(val) bfin_write16(DMA1_5_X_MODIFY,val) +#define bfin_read_DMA1_5_Y_MODIFY() bfin_read16(DMA1_5_Y_MODIFY) +#define bfin_write_DMA1_5_Y_MODIFY(val) bfin_write16(DMA1_5_Y_MODIFY,val) +#define bfin_read_DMA1_5_CURR_DESC_PTR() bfin_read32(DMA1_5_CURR_DESC_PTR) +#define bfin_write_DMA1_5_CURR_DESC_PTR(val) bfin_write32(DMA1_5_CURR_DESC_PTR,val) +#define bfin_read_DMA1_5_CURR_ADDR() bfin_read32(DMA1_5_CURR_ADDR) +#define bfin_write_DMA1_5_CURR_ADDR(val) bfin_write32(DMA1_5_CURR_ADDR,val) +#define bfin_read_DMA1_5_CURR_X_COUNT() bfin_read16(DMA1_5_CURR_X_COUNT) +#define bfin_write_DMA1_5_CURR_X_COUNT(val) bfin_write16(DMA1_5_CURR_X_COUNT,val) +#define bfin_read_DMA1_5_CURR_Y_COUNT() bfin_read16(DMA1_5_CURR_Y_COUNT) +#define bfin_write_DMA1_5_CURR_Y_COUNT(val) bfin_write16(DMA1_5_CURR_Y_COUNT,val) +#define bfin_read_DMA1_5_IRQ_STATUS() bfin_read16(DMA1_5_IRQ_STATUS) +#define bfin_write_DMA1_5_IRQ_STATUS(val) bfin_write16(DMA1_5_IRQ_STATUS,val) +#define bfin_read_DMA1_5_PERIPHERAL_MAP() bfin_read16(DMA1_5_PERIPHERAL_MAP) +#define bfin_write_DMA1_5_PERIPHERAL_MAP(val) bfin_write16(DMA1_5_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_6_CONFIG() bfin_read16(DMA1_6_CONFIG) +#define bfin_write_DMA1_6_CONFIG(val) bfin_write16(DMA1_6_CONFIG,val) +#define bfin_read_DMA1_6_NEXT_DESC_PTR() bfin_read32(DMA1_6_NEXT_DESC_PTR) +#define bfin_write_DMA1_6_NEXT_DESC_PTR(val) bfin_write32(DMA1_6_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_6_START_ADDR() bfin_read32(DMA1_6_START_ADDR) +#define bfin_write_DMA1_6_START_ADDR(val) bfin_write32(DMA1_6_START_ADDR,val) +#define bfin_read_DMA1_6_X_COUNT() bfin_read16(DMA1_6_X_COUNT) +#define bfin_write_DMA1_6_X_COUNT(val) bfin_write16(DMA1_6_X_COUNT,val) +#define bfin_read_DMA1_6_Y_COUNT() bfin_read16(DMA1_6_Y_COUNT) +#define bfin_write_DMA1_6_Y_COUNT(val) bfin_write16(DMA1_6_Y_COUNT,val) +#define bfin_read_DMA1_6_X_MODIFY() bfin_read16(DMA1_6_X_MODIFY) +#define bfin_write_DMA1_6_X_MODIFY(val) bfin_write16(DMA1_6_X_MODIFY,val) +#define bfin_read_DMA1_6_Y_MODIFY() bfin_read16(DMA1_6_Y_MODIFY) +#define bfin_write_DMA1_6_Y_MODIFY(val) bfin_write16(DMA1_6_Y_MODIFY,val) +#define bfin_read_DMA1_6_CURR_DESC_PTR() bfin_read32(DMA1_6_CURR_DESC_PTR) +#define bfin_write_DMA1_6_CURR_DESC_PTR(val) bfin_write32(DMA1_6_CURR_DESC_PTR,val) +#define bfin_read_DMA1_6_CURR_ADDR() bfin_read32(DMA1_6_CURR_ADDR) +#define bfin_write_DMA1_6_CURR_ADDR(val) bfin_write32(DMA1_6_CURR_ADDR,val) +#define bfin_read_DMA1_6_CURR_X_COUNT() bfin_read16(DMA1_6_CURR_X_COUNT) +#define bfin_write_DMA1_6_CURR_X_COUNT(val) bfin_write16(DMA1_6_CURR_X_COUNT,val) +#define bfin_read_DMA1_6_CURR_Y_COUNT() bfin_read16(DMA1_6_CURR_Y_COUNT) +#define bfin_write_DMA1_6_CURR_Y_COUNT(val) bfin_write16(DMA1_6_CURR_Y_COUNT,val) +#define bfin_read_DMA1_6_IRQ_STATUS() bfin_read16(DMA1_6_IRQ_STATUS) +#define bfin_write_DMA1_6_IRQ_STATUS(val) bfin_write16(DMA1_6_IRQ_STATUS,val) +#define bfin_read_DMA1_6_PERIPHERAL_MAP() bfin_read16(DMA1_6_PERIPHERAL_MAP) +#define bfin_write_DMA1_6_PERIPHERAL_MAP(val) bfin_write16(DMA1_6_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_7_CONFIG() bfin_read16(DMA1_7_CONFIG) +#define bfin_write_DMA1_7_CONFIG(val) bfin_write16(DMA1_7_CONFIG,val) +#define bfin_read_DMA1_7_NEXT_DESC_PTR() bfin_read32(DMA1_7_NEXT_DESC_PTR) +#define bfin_write_DMA1_7_NEXT_DESC_PTR(val) bfin_write32(DMA1_7_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_7_START_ADDR() bfin_read32(DMA1_7_START_ADDR) +#define bfin_write_DMA1_7_START_ADDR(val) bfin_write32(DMA1_7_START_ADDR,val) +#define bfin_read_DMA1_7_X_COUNT() bfin_read16(DMA1_7_X_COUNT) +#define bfin_write_DMA1_7_X_COUNT(val) bfin_write16(DMA1_7_X_COUNT,val) +#define bfin_read_DMA1_7_Y_COUNT() bfin_read16(DMA1_7_Y_COUNT) +#define bfin_write_DMA1_7_Y_COUNT(val) bfin_write16(DMA1_7_Y_COUNT,val) +#define bfin_read_DMA1_7_X_MODIFY() bfin_read16(DMA1_7_X_MODIFY) +#define bfin_write_DMA1_7_X_MODIFY(val) bfin_write16(DMA1_7_X_MODIFY,val) +#define bfin_read_DMA1_7_Y_MODIFY() bfin_read16(DMA1_7_Y_MODIFY) +#define bfin_write_DMA1_7_Y_MODIFY(val) bfin_write16(DMA1_7_Y_MODIFY,val) +#define bfin_read_DMA1_7_CURR_DESC_PTR() bfin_read32(DMA1_7_CURR_DESC_PTR) +#define bfin_write_DMA1_7_CURR_DESC_PTR(val) bfin_write32(DMA1_7_CURR_DESC_PTR,val) +#define bfin_read_DMA1_7_CURR_ADDR() bfin_read32(DMA1_7_CURR_ADDR) +#define bfin_write_DMA1_7_CURR_ADDR(val) bfin_write32(DMA1_7_CURR_ADDR,val) +#define bfin_read_DMA1_7_CURR_X_COUNT() bfin_read16(DMA1_7_CURR_X_COUNT) +#define bfin_write_DMA1_7_CURR_X_COUNT(val) bfin_write16(DMA1_7_CURR_X_COUNT,val) +#define bfin_read_DMA1_7_CURR_Y_COUNT() bfin_read16(DMA1_7_CURR_Y_COUNT) +#define bfin_write_DMA1_7_CURR_Y_COUNT(val) bfin_write16(DMA1_7_CURR_Y_COUNT,val) +#define bfin_read_DMA1_7_IRQ_STATUS() bfin_read16(DMA1_7_IRQ_STATUS) +#define bfin_write_DMA1_7_IRQ_STATUS(val) bfin_write16(DMA1_7_IRQ_STATUS,val) +#define bfin_read_DMA1_7_PERIPHERAL_MAP() bfin_read16(DMA1_7_PERIPHERAL_MAP) +#define bfin_write_DMA1_7_PERIPHERAL_MAP(val) bfin_write16(DMA1_7_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_8_CONFIG() bfin_read16(DMA1_8_CONFIG) +#define bfin_write_DMA1_8_CONFIG(val) bfin_write16(DMA1_8_CONFIG,val) +#define bfin_read_DMA1_8_NEXT_DESC_PTR() bfin_read32(DMA1_8_NEXT_DESC_PTR) +#define bfin_write_DMA1_8_NEXT_DESC_PTR(val) bfin_write32(DMA1_8_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_8_START_ADDR() bfin_read32(DMA1_8_START_ADDR) +#define bfin_write_DMA1_8_START_ADDR(val) bfin_write32(DMA1_8_START_ADDR,val) +#define bfin_read_DMA1_8_X_COUNT() bfin_read16(DMA1_8_X_COUNT) +#define bfin_write_DMA1_8_X_COUNT(val) bfin_write16(DMA1_8_X_COUNT,val) +#define bfin_read_DMA1_8_Y_COUNT() bfin_read16(DMA1_8_Y_COUNT) +#define bfin_write_DMA1_8_Y_COUNT(val) bfin_write16(DMA1_8_Y_COUNT,val) +#define bfin_read_DMA1_8_X_MODIFY() bfin_read16(DMA1_8_X_MODIFY) +#define bfin_write_DMA1_8_X_MODIFY(val) bfin_write16(DMA1_8_X_MODIFY,val) +#define bfin_read_DMA1_8_Y_MODIFY() bfin_read16(DMA1_8_Y_MODIFY) +#define bfin_write_DMA1_8_Y_MODIFY(val) bfin_write16(DMA1_8_Y_MODIFY,val) +#define bfin_read_DMA1_8_CURR_DESC_PTR() bfin_read32(DMA1_8_CURR_DESC_PTR) +#define bfin_write_DMA1_8_CURR_DESC_PTR(val) bfin_write32(DMA1_8_CURR_DESC_PTR,val) +#define bfin_read_DMA1_8_CURR_ADDR() bfin_read32(DMA1_8_CURR_ADDR) +#define bfin_write_DMA1_8_CURR_ADDR(val) bfin_write32(DMA1_8_CURR_ADDR,val) +#define bfin_read_DMA1_8_CURR_X_COUNT() bfin_read16(DMA1_8_CURR_X_COUNT) +#define bfin_write_DMA1_8_CURR_X_COUNT(val) bfin_write16(DMA1_8_CURR_X_COUNT,val) +#define bfin_read_DMA1_8_CURR_Y_COUNT() bfin_read16(DMA1_8_CURR_Y_COUNT) +#define bfin_write_DMA1_8_CURR_Y_COUNT(val) bfin_write16(DMA1_8_CURR_Y_COUNT,val) +#define bfin_read_DMA1_8_IRQ_STATUS() bfin_read16(DMA1_8_IRQ_STATUS) +#define bfin_write_DMA1_8_IRQ_STATUS(val) bfin_write16(DMA1_8_IRQ_STATUS,val) +#define bfin_read_DMA1_8_PERIPHERAL_MAP() bfin_read16(DMA1_8_PERIPHERAL_MAP) +#define bfin_write_DMA1_8_PERIPHERAL_MAP(val) bfin_write16(DMA1_8_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_9_CONFIG() bfin_read16(DMA1_9_CONFIG) +#define bfin_write_DMA1_9_CONFIG(val) bfin_write16(DMA1_9_CONFIG,val) +#define bfin_read_DMA1_9_NEXT_DESC_PTR() bfin_read32(DMA1_9_NEXT_DESC_PTR) +#define bfin_write_DMA1_9_NEXT_DESC_PTR(val) bfin_write32(DMA1_9_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_9_START_ADDR() bfin_read32(DMA1_9_START_ADDR) +#define bfin_write_DMA1_9_START_ADDR(val) bfin_write32(DMA1_9_START_ADDR,val) +#define bfin_read_DMA1_9_X_COUNT() bfin_read16(DMA1_9_X_COUNT) +#define bfin_write_DMA1_9_X_COUNT(val) bfin_write16(DMA1_9_X_COUNT,val) +#define bfin_read_DMA1_9_Y_COUNT() bfin_read16(DMA1_9_Y_COUNT) +#define bfin_write_DMA1_9_Y_COUNT(val) bfin_write16(DMA1_9_Y_COUNT,val) +#define bfin_read_DMA1_9_X_MODIFY() bfin_read16(DMA1_9_X_MODIFY) +#define bfin_write_DMA1_9_X_MODIFY(val) bfin_write16(DMA1_9_X_MODIFY,val) +#define bfin_read_DMA1_9_Y_MODIFY() bfin_read16(DMA1_9_Y_MODIFY) +#define bfin_write_DMA1_9_Y_MODIFY(val) bfin_write16(DMA1_9_Y_MODIFY,val) +#define bfin_read_DMA1_9_CURR_DESC_PTR() bfin_read32(DMA1_9_CURR_DESC_PTR) +#define bfin_write_DMA1_9_CURR_DESC_PTR(val) bfin_write32(DMA1_9_CURR_DESC_PTR,val) +#define bfin_read_DMA1_9_CURR_ADDR() bfin_read32(DMA1_9_CURR_ADDR) +#define bfin_write_DMA1_9_CURR_ADDR(val) bfin_write32(DMA1_9_CURR_ADDR,val) +#define bfin_read_DMA1_9_CURR_X_COUNT() bfin_read16(DMA1_9_CURR_X_COUNT) +#define bfin_write_DMA1_9_CURR_X_COUNT(val) bfin_write16(DMA1_9_CURR_X_COUNT,val) +#define bfin_read_DMA1_9_CURR_Y_COUNT() bfin_read16(DMA1_9_CURR_Y_COUNT) +#define bfin_write_DMA1_9_CURR_Y_COUNT(val) bfin_write16(DMA1_9_CURR_Y_COUNT,val) +#define bfin_read_DMA1_9_IRQ_STATUS() bfin_read16(DMA1_9_IRQ_STATUS) +#define bfin_write_DMA1_9_IRQ_STATUS(val) bfin_write16(DMA1_9_IRQ_STATUS,val) +#define bfin_read_DMA1_9_PERIPHERAL_MAP() bfin_read16(DMA1_9_PERIPHERAL_MAP) +#define bfin_write_DMA1_9_PERIPHERAL_MAP(val) bfin_write16(DMA1_9_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_10_CONFIG() bfin_read16(DMA1_10_CONFIG) +#define bfin_write_DMA1_10_CONFIG(val) bfin_write16(DMA1_10_CONFIG,val) +#define bfin_read_DMA1_10_NEXT_DESC_PTR() bfin_read32(DMA1_10_NEXT_DESC_PTR) +#define bfin_write_DMA1_10_NEXT_DESC_PTR(val) bfin_write32(DMA1_10_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_10_START_ADDR() bfin_read32(DMA1_10_START_ADDR) +#define bfin_write_DMA1_10_START_ADDR(val) bfin_write32(DMA1_10_START_ADDR,val) +#define bfin_read_DMA1_10_X_COUNT() bfin_read16(DMA1_10_X_COUNT) +#define bfin_write_DMA1_10_X_COUNT(val) bfin_write16(DMA1_10_X_COUNT,val) +#define bfin_read_DMA1_10_Y_COUNT() bfin_read16(DMA1_10_Y_COUNT) +#define bfin_write_DMA1_10_Y_COUNT(val) bfin_write16(DMA1_10_Y_COUNT,val) +#define bfin_read_DMA1_10_X_MODIFY() bfin_read16(DMA1_10_X_MODIFY) +#define bfin_write_DMA1_10_X_MODIFY(val) bfin_write16(DMA1_10_X_MODIFY,val) +#define bfin_read_DMA1_10_Y_MODIFY() bfin_read16(DMA1_10_Y_MODIFY) +#define bfin_write_DMA1_10_Y_MODIFY(val) bfin_write16(DMA1_10_Y_MODIFY,val) +#define bfin_read_DMA1_10_CURR_DESC_PTR() bfin_read32(DMA1_10_CURR_DESC_PTR) +#define bfin_write_DMA1_10_CURR_DESC_PTR(val) bfin_write32(DMA1_10_CURR_DESC_PTR,val) +#define bfin_read_DMA1_10_CURR_ADDR() bfin_read32(DMA1_10_CURR_ADDR) +#define bfin_write_DMA1_10_CURR_ADDR(val) bfin_write32(DMA1_10_CURR_ADDR,val) +#define bfin_read_DMA1_10_CURR_X_COUNT() bfin_read16(DMA1_10_CURR_X_COUNT) +#define bfin_write_DMA1_10_CURR_X_COUNT(val) bfin_write16(DMA1_10_CURR_X_COUNT,val) +#define bfin_read_DMA1_10_CURR_Y_COUNT() bfin_read16(DMA1_10_CURR_Y_COUNT) +#define bfin_write_DMA1_10_CURR_Y_COUNT(val) bfin_write16(DMA1_10_CURR_Y_COUNT,val) +#define bfin_read_DMA1_10_IRQ_STATUS() bfin_read16(DMA1_10_IRQ_STATUS) +#define bfin_write_DMA1_10_IRQ_STATUS(val) bfin_write16(DMA1_10_IRQ_STATUS,val) +#define bfin_read_DMA1_10_PERIPHERAL_MAP() bfin_read16(DMA1_10_PERIPHERAL_MAP) +#define bfin_write_DMA1_10_PERIPHERAL_MAP(val) bfin_write16(DMA1_10_PERIPHERAL_MAP,val) +#define bfin_read_DMA1_11_CONFIG() bfin_read16(DMA1_11_CONFIG) +#define bfin_write_DMA1_11_CONFIG(val) bfin_write16(DMA1_11_CONFIG,val) +#define bfin_read_DMA1_11_NEXT_DESC_PTR() bfin_read32(DMA1_11_NEXT_DESC_PTR) +#define bfin_write_DMA1_11_NEXT_DESC_PTR(val) bfin_write32(DMA1_11_NEXT_DESC_PTR,val) +#define bfin_read_DMA1_11_START_ADDR() bfin_read32(DMA1_11_START_ADDR) +#define bfin_write_DMA1_11_START_ADDR(val) bfin_write32(DMA1_11_START_ADDR,val) +#define bfin_read_DMA1_11_X_COUNT() bfin_read16(DMA1_11_X_COUNT) +#define bfin_write_DMA1_11_X_COUNT(val) bfin_write16(DMA1_11_X_COUNT,val) +#define bfin_read_DMA1_11_Y_COUNT() bfin_read16(DMA1_11_Y_COUNT) +#define bfin_write_DMA1_11_Y_COUNT(val) bfin_write16(DMA1_11_Y_COUNT,val) +#define bfin_read_DMA1_11_X_MODIFY() bfin_read16(DMA1_11_X_MODIFY) +#define bfin_write_DMA1_11_X_MODIFY(val) bfin_write16(DMA1_11_X_MODIFY,val) +#define bfin_read_DMA1_11_Y_MODIFY() bfin_read16(DMA1_11_Y_MODIFY) +#define bfin_write_DMA1_11_Y_MODIFY(val) bfin_write16(DMA1_11_Y_MODIFY,val) +#define bfin_read_DMA1_11_CURR_DESC_PTR() bfin_read32(DMA1_11_CURR_DESC_PTR) +#define bfin_write_DMA1_11_CURR_DESC_PTR(val) bfin_write32(DMA1_11_CURR_DESC_PTR,val) +#define bfin_read_DMA1_11_CURR_ADDR() bfin_read32(DMA1_11_CURR_ADDR) +#define bfin_write_DMA1_11_CURR_ADDR(val) bfin_write32(DMA1_11_CURR_ADDR,val) +#define bfin_read_DMA1_11_CURR_X_COUNT() bfin_read16(DMA1_11_CURR_X_COUNT) +#define bfin_write_DMA1_11_CURR_X_COUNT(val) bfin_write16(DMA1_11_CURR_X_COUNT,val) +#define bfin_read_DMA1_11_CURR_Y_COUNT() bfin_read16(DMA1_11_CURR_Y_COUNT) +#define bfin_write_DMA1_11_CURR_Y_COUNT(val) bfin_write16(DMA1_11_CURR_Y_COUNT,val) +#define bfin_read_DMA1_11_IRQ_STATUS() bfin_read16(DMA1_11_IRQ_STATUS) +#define bfin_write_DMA1_11_IRQ_STATUS(val) bfin_write16(DMA1_11_IRQ_STATUS,val) +#define bfin_read_DMA1_11_PERIPHERAL_MAP() bfin_read16(DMA1_11_PERIPHERAL_MAP) +#define bfin_write_DMA1_11_PERIPHERAL_MAP(val) bfin_write16(DMA1_11_PERIPHERAL_MAP,val) +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define bfin_read_MDMA1_D0_CONFIG() bfin_read16(MDMA1_D0_CONFIG) +#define bfin_write_MDMA1_D0_CONFIG(val) bfin_write16(MDMA1_D0_CONFIG,val) +#define bfin_read_MDMA1_D0_NEXT_DESC_PTR() bfin_read32(MDMA1_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA1_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA1_D0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA1_D0_START_ADDR() bfin_read32(MDMA1_D0_START_ADDR) +#define bfin_write_MDMA1_D0_START_ADDR(val) bfin_write32(MDMA1_D0_START_ADDR,val) +#define bfin_read_MDMA1_D0_X_COUNT() bfin_read16(MDMA1_D0_X_COUNT) +#define bfin_write_MDMA1_D0_X_COUNT(val) bfin_write16(MDMA1_D0_X_COUNT,val) +#define bfin_read_MDMA1_D0_Y_COUNT() bfin_read16(MDMA1_D0_Y_COUNT) +#define bfin_write_MDMA1_D0_Y_COUNT(val) bfin_write16(MDMA1_D0_Y_COUNT,val) +#define bfin_read_MDMA1_D0_X_MODIFY() bfin_read16(MDMA1_D0_X_MODIFY) +#define bfin_write_MDMA1_D0_X_MODIFY(val) bfin_write16(MDMA1_D0_X_MODIFY,val) +#define bfin_read_MDMA1_D0_Y_MODIFY() bfin_read16(MDMA1_D0_Y_MODIFY) +#define bfin_write_MDMA1_D0_Y_MODIFY(val) bfin_write16(MDMA1_D0_Y_MODIFY,val) +#define bfin_read_MDMA1_D0_CURR_DESC_PTR() bfin_read32(MDMA1_D0_CURR_DESC_PTR) +#define bfin_write_MDMA1_D0_CURR_DESC_PTR(val) bfin_write32(MDMA1_D0_CURR_DESC_PTR,val) +#define bfin_read_MDMA1_D0_CURR_ADDR() bfin_read32(MDMA1_D0_CURR_ADDR) +#define bfin_write_MDMA1_D0_CURR_ADDR(val) bfin_write32(MDMA1_D0_CURR_ADDR,val) +#define bfin_read_MDMA1_D0_CURR_X_COUNT() bfin_read16(MDMA1_D0_CURR_X_COUNT) +#define bfin_write_MDMA1_D0_CURR_X_COUNT(val) bfin_write16(MDMA1_D0_CURR_X_COUNT,val) +#define bfin_read_MDMA1_D0_CURR_Y_COUNT() bfin_read16(MDMA1_D0_CURR_Y_COUNT) +#define bfin_write_MDMA1_D0_CURR_Y_COUNT(val) bfin_write16(MDMA1_D0_CURR_Y_COUNT,val) +#define bfin_read_MDMA1_D0_IRQ_STATUS() bfin_read16(MDMA1_D0_IRQ_STATUS) +#define bfin_write_MDMA1_D0_IRQ_STATUS(val) bfin_write16(MDMA1_D0_IRQ_STATUS,val) +#define bfin_read_MDMA1_D0_PERIPHERAL_MAP() bfin_read16(MDMA1_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA1_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D0_PERIPHERAL_MAP,val) +#define bfin_read_MDMA1_S0_CONFIG() bfin_read16(MDMA1_S0_CONFIG) +#define bfin_write_MDMA1_S0_CONFIG(val) bfin_write16(MDMA1_S0_CONFIG,val) +#define bfin_read_MDMA1_S0_NEXT_DESC_PTR() bfin_read32(MDMA1_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA1_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA1_S0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA1_S0_START_ADDR() bfin_read32(MDMA1_S0_START_ADDR) +#define bfin_write_MDMA1_S0_START_ADDR(val) bfin_write32(MDMA1_S0_START_ADDR,val) +#define bfin_read_MDMA1_S0_X_COUNT() bfin_read16(MDMA1_S0_X_COUNT) +#define bfin_write_MDMA1_S0_X_COUNT(val) bfin_write16(MDMA1_S0_X_COUNT,val) +#define bfin_read_MDMA1_S0_Y_COUNT() bfin_read16(MDMA1_S0_Y_COUNT) +#define bfin_write_MDMA1_S0_Y_COUNT(val) bfin_write16(MDMA1_S0_Y_COUNT,val) +#define bfin_read_MDMA1_S0_X_MODIFY() bfin_read16(MDMA1_S0_X_MODIFY) +#define bfin_write_MDMA1_S0_X_MODIFY(val) bfin_write16(MDMA1_S0_X_MODIFY,val) +#define bfin_read_MDMA1_S0_Y_MODIFY() bfin_read16(MDMA1_S0_Y_MODIFY) +#define bfin_write_MDMA1_S0_Y_MODIFY(val) bfin_write16(MDMA1_S0_Y_MODIFY,val) +#define bfin_read_MDMA1_S0_CURR_DESC_PTR() bfin_read32(MDMA1_S0_CURR_DESC_PTR) +#define bfin_write_MDMA1_S0_CURR_DESC_PTR(val) bfin_write32(MDMA1_S0_CURR_DESC_PTR,val) +#define bfin_read_MDMA1_S0_CURR_ADDR() bfin_read32(MDMA1_S0_CURR_ADDR) +#define bfin_write_MDMA1_S0_CURR_ADDR(val) bfin_write32(MDMA1_S0_CURR_ADDR,val) +#define bfin_read_MDMA1_S0_CURR_X_COUNT() bfin_read16(MDMA1_S0_CURR_X_COUNT) +#define bfin_write_MDMA1_S0_CURR_X_COUNT(val) bfin_write16(MDMA1_S0_CURR_X_COUNT,val) +#define bfin_read_MDMA1_S0_CURR_Y_COUNT() bfin_read16(MDMA1_S0_CURR_Y_COUNT) +#define bfin_write_MDMA1_S0_CURR_Y_COUNT(val) bfin_write16(MDMA1_S0_CURR_Y_COUNT,val) +#define bfin_read_MDMA1_S0_IRQ_STATUS() bfin_read16(MDMA1_S0_IRQ_STATUS) +#define bfin_write_MDMA1_S0_IRQ_STATUS(val) bfin_write16(MDMA1_S0_IRQ_STATUS,val) +#define bfin_read_MDMA1_S0_PERIPHERAL_MAP() bfin_read16(MDMA1_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA1_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S0_PERIPHERAL_MAP,val) +#define bfin_read_MDMA1_D1_CONFIG() bfin_read16(MDMA1_D1_CONFIG) +#define bfin_write_MDMA1_D1_CONFIG(val) bfin_write16(MDMA1_D1_CONFIG,val) +#define bfin_read_MDMA1_D1_NEXT_DESC_PTR() bfin_read32(MDMA1_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA1_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_D1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA1_D1_START_ADDR() bfin_read32(MDMA1_D1_START_ADDR) +#define bfin_write_MDMA1_D1_START_ADDR(val) bfin_write32(MDMA1_D1_START_ADDR,val) +#define bfin_read_MDMA1_D1_X_COUNT() bfin_read16(MDMA1_D1_X_COUNT) +#define bfin_write_MDMA1_D1_X_COUNT(val) bfin_write16(MDMA1_D1_X_COUNT,val) +#define bfin_read_MDMA1_D1_Y_COUNT() bfin_read16(MDMA1_D1_Y_COUNT) +#define bfin_write_MDMA1_D1_Y_COUNT(val) bfin_write16(MDMA1_D1_Y_COUNT,val) +#define bfin_read_MDMA1_D1_X_MODIFY() bfin_read16(MDMA1_D1_X_MODIFY) +#define bfin_write_MDMA1_D1_X_MODIFY(val) bfin_write16(MDMA1_D1_X_MODIFY,val) +#define bfin_read_MDMA1_D1_Y_MODIFY() bfin_read16(MDMA1_D1_Y_MODIFY) +#define bfin_write_MDMA1_D1_Y_MODIFY(val) bfin_write16(MDMA1_D1_Y_MODIFY,val) +#define bfin_read_MDMA1_D1_CURR_DESC_PTR() bfin_read32(MDMA1_D1_CURR_DESC_PTR) +#define bfin_write_MDMA1_D1_CURR_DESC_PTR(val) bfin_write32(MDMA1_D1_CURR_DESC_PTR,val) +#define bfin_read_MDMA1_D1_CURR_ADDR() bfin_read32(MDMA1_D1_CURR_ADDR) +#define bfin_write_MDMA1_D1_CURR_ADDR(val) bfin_write32(MDMA1_D1_CURR_ADDR,val) +#define bfin_read_MDMA1_D1_CURR_X_COUNT() bfin_read16(MDMA1_D1_CURR_X_COUNT) +#define bfin_write_MDMA1_D1_CURR_X_COUNT(val) bfin_write16(MDMA1_D1_CURR_X_COUNT,val) +#define bfin_read_MDMA1_D1_CURR_Y_COUNT() bfin_read16(MDMA1_D1_CURR_Y_COUNT) +#define bfin_write_MDMA1_D1_CURR_Y_COUNT(val) bfin_write16(MDMA1_D1_CURR_Y_COUNT,val) +#define bfin_read_MDMA1_D1_IRQ_STATUS() bfin_read16(MDMA1_D1_IRQ_STATUS) +#define bfin_write_MDMA1_D1_IRQ_STATUS(val) bfin_write16(MDMA1_D1_IRQ_STATUS,val) +#define bfin_read_MDMA1_D1_PERIPHERAL_MAP() bfin_read16(MDMA1_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA1_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D1_PERIPHERAL_MAP,val) +#define bfin_read_MDMA1_S1_CONFIG() bfin_read16(MDMA1_S1_CONFIG) +#define bfin_write_MDMA1_S1_CONFIG(val) bfin_write16(MDMA1_S1_CONFIG,val) +#define bfin_read_MDMA1_S1_NEXT_DESC_PTR() bfin_read32(MDMA1_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA1_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_S1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA1_S1_START_ADDR() bfin_read32(MDMA1_S1_START_ADDR) +#define bfin_write_MDMA1_S1_START_ADDR(val) bfin_write32(MDMA1_S1_START_ADDR,val) +#define bfin_read_MDMA1_S1_X_COUNT() bfin_read16(MDMA1_S1_X_COUNT) +#define bfin_write_MDMA1_S1_X_COUNT(val) bfin_write16(MDMA1_S1_X_COUNT,val) +#define bfin_read_MDMA1_S1_Y_COUNT() bfin_read16(MDMA1_S1_Y_COUNT) +#define bfin_write_MDMA1_S1_Y_COUNT(val) bfin_write16(MDMA1_S1_Y_COUNT,val) +#define bfin_read_MDMA1_S1_X_MODIFY() bfin_read16(MDMA1_S1_X_MODIFY) +#define bfin_write_MDMA1_S1_X_MODIFY(val) bfin_write16(MDMA1_S1_X_MODIFY,val) +#define bfin_read_MDMA1_S1_Y_MODIFY() bfin_read16(MDMA1_S1_Y_MODIFY) +#define bfin_write_MDMA1_S1_Y_MODIFY(val) bfin_write16(MDMA1_S1_Y_MODIFY,val) +#define bfin_read_MDMA1_S1_CURR_DESC_PTR() bfin_read32(MDMA1_S1_CURR_DESC_PTR) +#define bfin_write_MDMA1_S1_CURR_DESC_PTR(val) bfin_write32(MDMA1_S1_CURR_DESC_PTR,val) +#define bfin_read_MDMA1_S1_CURR_ADDR() bfin_read32(MDMA1_S1_CURR_ADDR) +#define bfin_write_MDMA1_S1_CURR_ADDR(val) bfin_write32(MDMA1_S1_CURR_ADDR,val) +#define bfin_read_MDMA1_S1_CURR_X_COUNT() bfin_read16(MDMA1_S1_CURR_X_COUNT) +#define bfin_write_MDMA1_S1_CURR_X_COUNT(val) bfin_write16(MDMA1_S1_CURR_X_COUNT,val) +#define bfin_read_MDMA1_S1_CURR_Y_COUNT() bfin_read16(MDMA1_S1_CURR_Y_COUNT) +#define bfin_write_MDMA1_S1_CURR_Y_COUNT(val) bfin_write16(MDMA1_S1_CURR_Y_COUNT,val) +#define bfin_read_MDMA1_S1_IRQ_STATUS() bfin_read16(MDMA1_S1_IRQ_STATUS) +#define bfin_write_MDMA1_S1_IRQ_STATUS(val) bfin_write16(MDMA1_S1_IRQ_STATUS,val) +#define bfin_read_MDMA1_S1_PERIPHERAL_MAP() bfin_read16(MDMA1_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA1_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S1_PERIPHERAL_MAP,val) +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define bfin_read_DMA2_0_CONFIG() bfin_read16(DMA2_0_CONFIG) +#define bfin_write_DMA2_0_CONFIG(val) bfin_write16(DMA2_0_CONFIG,val) +#define bfin_read_DMA2_0_NEXT_DESC_PTR() bfin_read32(DMA2_0_NEXT_DESC_PTR) +#define bfin_write_DMA2_0_NEXT_DESC_PTR(val) bfin_write32(DMA2_0_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_0_START_ADDR() bfin_read32(DMA2_0_START_ADDR) +#define bfin_write_DMA2_0_START_ADDR(val) bfin_write32(DMA2_0_START_ADDR,val) +#define bfin_read_DMA2_0_X_COUNT() bfin_read16(DMA2_0_X_COUNT) +#define bfin_write_DMA2_0_X_COUNT(val) bfin_write16(DMA2_0_X_COUNT,val) +#define bfin_read_DMA2_0_Y_COUNT() bfin_read16(DMA2_0_Y_COUNT) +#define bfin_write_DMA2_0_Y_COUNT(val) bfin_write16(DMA2_0_Y_COUNT,val) +#define bfin_read_DMA2_0_X_MODIFY() bfin_read16(DMA2_0_X_MODIFY) +#define bfin_write_DMA2_0_X_MODIFY(val) bfin_write16(DMA2_0_X_MODIFY,val) +#define bfin_read_DMA2_0_Y_MODIFY() bfin_read16(DMA2_0_Y_MODIFY) +#define bfin_write_DMA2_0_Y_MODIFY(val) bfin_write16(DMA2_0_Y_MODIFY,val) +#define bfin_read_DMA2_0_CURR_DESC_PTR() bfin_read32(DMA2_0_CURR_DESC_PTR) +#define bfin_write_DMA2_0_CURR_DESC_PTR(val) bfin_write32(DMA2_0_CURR_DESC_PTR,val) +#define bfin_read_DMA2_0_CURR_ADDR() bfin_read32(DMA2_0_CURR_ADDR) +#define bfin_write_DMA2_0_CURR_ADDR(val) bfin_write32(DMA2_0_CURR_ADDR,val) +#define bfin_read_DMA2_0_CURR_X_COUNT() bfin_read16(DMA2_0_CURR_X_COUNT) +#define bfin_write_DMA2_0_CURR_X_COUNT(val) bfin_write16(DMA2_0_CURR_X_COUNT,val) +#define bfin_read_DMA2_0_CURR_Y_COUNT() bfin_read16(DMA2_0_CURR_Y_COUNT) +#define bfin_write_DMA2_0_CURR_Y_COUNT(val) bfin_write16(DMA2_0_CURR_Y_COUNT,val) +#define bfin_read_DMA2_0_IRQ_STATUS() bfin_read16(DMA2_0_IRQ_STATUS) +#define bfin_write_DMA2_0_IRQ_STATUS(val) bfin_write16(DMA2_0_IRQ_STATUS,val) +#define bfin_read_DMA2_0_PERIPHERAL_MAP() bfin_read16(DMA2_0_PERIPHERAL_MAP) +#define bfin_write_DMA2_0_PERIPHERAL_MAP(val) bfin_write16(DMA2_0_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_1_CONFIG() bfin_read16(DMA2_1_CONFIG) +#define bfin_write_DMA2_1_CONFIG(val) bfin_write16(DMA2_1_CONFIG,val) +#define bfin_read_DMA2_1_NEXT_DESC_PTR() bfin_read32(DMA2_1_NEXT_DESC_PTR) +#define bfin_write_DMA2_1_NEXT_DESC_PTR(val) bfin_write32(DMA2_1_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_1_START_ADDR() bfin_read32(DMA2_1_START_ADDR) +#define bfin_write_DMA2_1_START_ADDR(val) bfin_write32(DMA2_1_START_ADDR,val) +#define bfin_read_DMA2_1_X_COUNT() bfin_read16(DMA2_1_X_COUNT) +#define bfin_write_DMA2_1_X_COUNT(val) bfin_write16(DMA2_1_X_COUNT,val) +#define bfin_read_DMA2_1_Y_COUNT() bfin_read16(DMA2_1_Y_COUNT) +#define bfin_write_DMA2_1_Y_COUNT(val) bfin_write16(DMA2_1_Y_COUNT,val) +#define bfin_read_DMA2_1_X_MODIFY() bfin_read16(DMA2_1_X_MODIFY) +#define bfin_write_DMA2_1_X_MODIFY(val) bfin_write16(DMA2_1_X_MODIFY,val) +#define bfin_read_DMA2_1_Y_MODIFY() bfin_read16(DMA2_1_Y_MODIFY) +#define bfin_write_DMA2_1_Y_MODIFY(val) bfin_write16(DMA2_1_Y_MODIFY,val) +#define bfin_read_DMA2_1_CURR_DESC_PTR() bfin_read32(DMA2_1_CURR_DESC_PTR) +#define bfin_write_DMA2_1_CURR_DESC_PTR(val) bfin_write32(DMA2_1_CURR_DESC_PTR,val) +#define bfin_read_DMA2_1_CURR_ADDR() bfin_read32(DMA2_1_CURR_ADDR) +#define bfin_write_DMA2_1_CURR_ADDR(val) bfin_write32(DMA2_1_CURR_ADDR,val) +#define bfin_read_DMA2_1_CURR_X_COUNT() bfin_read16(DMA2_1_CURR_X_COUNT) +#define bfin_write_DMA2_1_CURR_X_COUNT(val) bfin_write16(DMA2_1_CURR_X_COUNT,val) +#define bfin_read_DMA2_1_CURR_Y_COUNT() bfin_read16(DMA2_1_CURR_Y_COUNT) +#define bfin_write_DMA2_1_CURR_Y_COUNT(val) bfin_write16(DMA2_1_CURR_Y_COUNT,val) +#define bfin_read_DMA2_1_IRQ_STATUS() bfin_read16(DMA2_1_IRQ_STATUS) +#define bfin_write_DMA2_1_IRQ_STATUS(val) bfin_write16(DMA2_1_IRQ_STATUS,val) +#define bfin_read_DMA2_1_PERIPHERAL_MAP() bfin_read16(DMA2_1_PERIPHERAL_MAP) +#define bfin_write_DMA2_1_PERIPHERAL_MAP(val) bfin_write16(DMA2_1_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_2_CONFIG() bfin_read16(DMA2_2_CONFIG) +#define bfin_write_DMA2_2_CONFIG(val) bfin_write16(DMA2_2_CONFIG,val) +#define bfin_read_DMA2_2_NEXT_DESC_PTR() bfin_read32(DMA2_2_NEXT_DESC_PTR) +#define bfin_write_DMA2_2_NEXT_DESC_PTR(val) bfin_write32(DMA2_2_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_2_START_ADDR() bfin_read32(DMA2_2_START_ADDR) +#define bfin_write_DMA2_2_START_ADDR(val) bfin_write32(DMA2_2_START_ADDR,val) +#define bfin_read_DMA2_2_X_COUNT() bfin_read16(DMA2_2_X_COUNT) +#define bfin_write_DMA2_2_X_COUNT(val) bfin_write16(DMA2_2_X_COUNT,val) +#define bfin_read_DMA2_2_Y_COUNT() bfin_read16(DMA2_2_Y_COUNT) +#define bfin_write_DMA2_2_Y_COUNT(val) bfin_write16(DMA2_2_Y_COUNT,val) +#define bfin_read_DMA2_2_X_MODIFY() bfin_read16(DMA2_2_X_MODIFY) +#define bfin_write_DMA2_2_X_MODIFY(val) bfin_write16(DMA2_2_X_MODIFY,val) +#define bfin_read_DMA2_2_Y_MODIFY() bfin_read16(DMA2_2_Y_MODIFY) +#define bfin_write_DMA2_2_Y_MODIFY(val) bfin_write16(DMA2_2_Y_MODIFY,val) +#define bfin_read_DMA2_2_CURR_DESC_PTR() bfin_read32(DMA2_2_CURR_DESC_PTR) +#define bfin_write_DMA2_2_CURR_DESC_PTR(val) bfin_write32(DMA2_2_CURR_DESC_PTR,val) +#define bfin_read_DMA2_2_CURR_ADDR() bfin_read32(DMA2_2_CURR_ADDR) +#define bfin_write_DMA2_2_CURR_ADDR(val) bfin_write32(DMA2_2_CURR_ADDR,val) +#define bfin_read_DMA2_2_CURR_X_COUNT() bfin_read16(DMA2_2_CURR_X_COUNT) +#define bfin_write_DMA2_2_CURR_X_COUNT(val) bfin_write16(DMA2_2_CURR_X_COUNT,val) +#define bfin_read_DMA2_2_CURR_Y_COUNT() bfin_read16(DMA2_2_CURR_Y_COUNT) +#define bfin_write_DMA2_2_CURR_Y_COUNT(val) bfin_write16(DMA2_2_CURR_Y_COUNT,val) +#define bfin_read_DMA2_2_IRQ_STATUS() bfin_read16(DMA2_2_IRQ_STATUS) +#define bfin_write_DMA2_2_IRQ_STATUS(val) bfin_write16(DMA2_2_IRQ_STATUS,val) +#define bfin_read_DMA2_2_PERIPHERAL_MAP() bfin_read16(DMA2_2_PERIPHERAL_MAP) +#define bfin_write_DMA2_2_PERIPHERAL_MAP(val) bfin_write16(DMA2_2_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_3_CONFIG() bfin_read16(DMA2_3_CONFIG) +#define bfin_write_DMA2_3_CONFIG(val) bfin_write16(DMA2_3_CONFIG,val) +#define bfin_read_DMA2_3_NEXT_DESC_PTR() bfin_read32(DMA2_3_NEXT_DESC_PTR) +#define bfin_write_DMA2_3_NEXT_DESC_PTR(val) bfin_write32(DMA2_3_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_3_START_ADDR() bfin_read32(DMA2_3_START_ADDR) +#define bfin_write_DMA2_3_START_ADDR(val) bfin_write32(DMA2_3_START_ADDR,val) +#define bfin_read_DMA2_3_X_COUNT() bfin_read16(DMA2_3_X_COUNT) +#define bfin_write_DMA2_3_X_COUNT(val) bfin_write16(DMA2_3_X_COUNT,val) +#define bfin_read_DMA2_3_Y_COUNT() bfin_read16(DMA2_3_Y_COUNT) +#define bfin_write_DMA2_3_Y_COUNT(val) bfin_write16(DMA2_3_Y_COUNT,val) +#define bfin_read_DMA2_3_X_MODIFY() bfin_read16(DMA2_3_X_MODIFY) +#define bfin_write_DMA2_3_X_MODIFY(val) bfin_write16(DMA2_3_X_MODIFY,val) +#define bfin_read_DMA2_3_Y_MODIFY() bfin_read16(DMA2_3_Y_MODIFY) +#define bfin_write_DMA2_3_Y_MODIFY(val) bfin_write16(DMA2_3_Y_MODIFY,val) +#define bfin_read_DMA2_3_CURR_DESC_PTR() bfin_read32(DMA2_3_CURR_DESC_PTR) +#define bfin_write_DMA2_3_CURR_DESC_PTR(val) bfin_write32(DMA2_3_CURR_DESC_PTR,val) +#define bfin_read_DMA2_3_CURR_ADDR() bfin_read32(DMA2_3_CURR_ADDR) +#define bfin_write_DMA2_3_CURR_ADDR(val) bfin_write32(DMA2_3_CURR_ADDR,val) +#define bfin_read_DMA2_3_CURR_X_COUNT() bfin_read16(DMA2_3_CURR_X_COUNT) +#define bfin_write_DMA2_3_CURR_X_COUNT(val) bfin_write16(DMA2_3_CURR_X_COUNT,val) +#define bfin_read_DMA2_3_CURR_Y_COUNT() bfin_read16(DMA2_3_CURR_Y_COUNT) +#define bfin_write_DMA2_3_CURR_Y_COUNT(val) bfin_write16(DMA2_3_CURR_Y_COUNT,val) +#define bfin_read_DMA2_3_IRQ_STATUS() bfin_read16(DMA2_3_IRQ_STATUS) +#define bfin_write_DMA2_3_IRQ_STATUS(val) bfin_write16(DMA2_3_IRQ_STATUS,val) +#define bfin_read_DMA2_3_PERIPHERAL_MAP() bfin_read16(DMA2_3_PERIPHERAL_MAP) +#define bfin_write_DMA2_3_PERIPHERAL_MAP(val) bfin_write16(DMA2_3_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_4_CONFIG() bfin_read16(DMA2_4_CONFIG) +#define bfin_write_DMA2_4_CONFIG(val) bfin_write16(DMA2_4_CONFIG,val) +#define bfin_read_DMA2_4_NEXT_DESC_PTR() bfin_read32(DMA2_4_NEXT_DESC_PTR) +#define bfin_write_DMA2_4_NEXT_DESC_PTR(val) bfin_write32(DMA2_4_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_4_START_ADDR() bfin_read32(DMA2_4_START_ADDR) +#define bfin_write_DMA2_4_START_ADDR(val) bfin_write32(DMA2_4_START_ADDR,val) +#define bfin_read_DMA2_4_X_COUNT() bfin_read16(DMA2_4_X_COUNT) +#define bfin_write_DMA2_4_X_COUNT(val) bfin_write16(DMA2_4_X_COUNT,val) +#define bfin_read_DMA2_4_Y_COUNT() bfin_read16(DMA2_4_Y_COUNT) +#define bfin_write_DMA2_4_Y_COUNT(val) bfin_write16(DMA2_4_Y_COUNT,val) +#define bfin_read_DMA2_4_X_MODIFY() bfin_read16(DMA2_4_X_MODIFY) +#define bfin_write_DMA2_4_X_MODIFY(val) bfin_write16(DMA2_4_X_MODIFY,val) +#define bfin_read_DMA2_4_Y_MODIFY() bfin_read16(DMA2_4_Y_MODIFY) +#define bfin_write_DMA2_4_Y_MODIFY(val) bfin_write16(DMA2_4_Y_MODIFY,val) +#define bfin_read_DMA2_4_CURR_DESC_PTR() bfin_read32(DMA2_4_CURR_DESC_PTR) +#define bfin_write_DMA2_4_CURR_DESC_PTR(val) bfin_write32(DMA2_4_CURR_DESC_PTR,val) +#define bfin_read_DMA2_4_CURR_ADDR() bfin_read32(DMA2_4_CURR_ADDR) +#define bfin_write_DMA2_4_CURR_ADDR(val) bfin_write32(DMA2_4_CURR_ADDR,val) +#define bfin_read_DMA2_4_CURR_X_COUNT() bfin_read16(DMA2_4_CURR_X_COUNT) +#define bfin_write_DMA2_4_CURR_X_COUNT(val) bfin_write16(DMA2_4_CURR_X_COUNT,val) +#define bfin_read_DMA2_4_CURR_Y_COUNT() bfin_read16(DMA2_4_CURR_Y_COUNT) +#define bfin_write_DMA2_4_CURR_Y_COUNT(val) bfin_write16(DMA2_4_CURR_Y_COUNT,val) +#define bfin_read_DMA2_4_IRQ_STATUS() bfin_read16(DMA2_4_IRQ_STATUS) +#define bfin_write_DMA2_4_IRQ_STATUS(val) bfin_write16(DMA2_4_IRQ_STATUS,val) +#define bfin_read_DMA2_4_PERIPHERAL_MAP() bfin_read16(DMA2_4_PERIPHERAL_MAP) +#define bfin_write_DMA2_4_PERIPHERAL_MAP(val) bfin_write16(DMA2_4_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_5_CONFIG() bfin_read16(DMA2_5_CONFIG) +#define bfin_write_DMA2_5_CONFIG(val) bfin_write16(DMA2_5_CONFIG,val) +#define bfin_read_DMA2_5_NEXT_DESC_PTR() bfin_read32(DMA2_5_NEXT_DESC_PTR) +#define bfin_write_DMA2_5_NEXT_DESC_PTR(val) bfin_write32(DMA2_5_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_5_START_ADDR() bfin_read32(DMA2_5_START_ADDR) +#define bfin_write_DMA2_5_START_ADDR(val) bfin_write32(DMA2_5_START_ADDR,val) +#define bfin_read_DMA2_5_X_COUNT() bfin_read16(DMA2_5_X_COUNT) +#define bfin_write_DMA2_5_X_COUNT(val) bfin_write16(DMA2_5_X_COUNT,val) +#define bfin_read_DMA2_5_Y_COUNT() bfin_read16(DMA2_5_Y_COUNT) +#define bfin_write_DMA2_5_Y_COUNT(val) bfin_write16(DMA2_5_Y_COUNT,val) +#define bfin_read_DMA2_5_X_MODIFY() bfin_read16(DMA2_5_X_MODIFY) +#define bfin_write_DMA2_5_X_MODIFY(val) bfin_write16(DMA2_5_X_MODIFY,val) +#define bfin_read_DMA2_5_Y_MODIFY() bfin_read16(DMA2_5_Y_MODIFY) +#define bfin_write_DMA2_5_Y_MODIFY(val) bfin_write16(DMA2_5_Y_MODIFY,val) +#define bfin_read_DMA2_5_CURR_DESC_PTR() bfin_read32(DMA2_5_CURR_DESC_PTR) +#define bfin_write_DMA2_5_CURR_DESC_PTR(val) bfin_write32(DMA2_5_CURR_DESC_PTR,val) +#define bfin_read_DMA2_5_CURR_ADDR() bfin_read32(DMA2_5_CURR_ADDR) +#define bfin_write_DMA2_5_CURR_ADDR(val) bfin_write32(DMA2_5_CURR_ADDR,val) +#define bfin_read_DMA2_5_CURR_X_COUNT() bfin_read16(DMA2_5_CURR_X_COUNT) +#define bfin_write_DMA2_5_CURR_X_COUNT(val) bfin_write16(DMA2_5_CURR_X_COUNT,val) +#define bfin_read_DMA2_5_CURR_Y_COUNT() bfin_read16(DMA2_5_CURR_Y_COUNT) +#define bfin_write_DMA2_5_CURR_Y_COUNT(val) bfin_write16(DMA2_5_CURR_Y_COUNT,val) +#define bfin_read_DMA2_5_IRQ_STATUS() bfin_read16(DMA2_5_IRQ_STATUS) +#define bfin_write_DMA2_5_IRQ_STATUS(val) bfin_write16(DMA2_5_IRQ_STATUS,val) +#define bfin_read_DMA2_5_PERIPHERAL_MAP() bfin_read16(DMA2_5_PERIPHERAL_MAP) +#define bfin_write_DMA2_5_PERIPHERAL_MAP(val) bfin_write16(DMA2_5_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_6_CONFIG() bfin_read16(DMA2_6_CONFIG) +#define bfin_write_DMA2_6_CONFIG(val) bfin_write16(DMA2_6_CONFIG,val) +#define bfin_read_DMA2_6_NEXT_DESC_PTR() bfin_read32(DMA2_6_NEXT_DESC_PTR) +#define bfin_write_DMA2_6_NEXT_DESC_PTR(val) bfin_write32(DMA2_6_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_6_START_ADDR() bfin_read32(DMA2_6_START_ADDR) +#define bfin_write_DMA2_6_START_ADDR(val) bfin_write32(DMA2_6_START_ADDR,val) +#define bfin_read_DMA2_6_X_COUNT() bfin_read16(DMA2_6_X_COUNT) +#define bfin_write_DMA2_6_X_COUNT(val) bfin_write16(DMA2_6_X_COUNT,val) +#define bfin_read_DMA2_6_Y_COUNT() bfin_read16(DMA2_6_Y_COUNT) +#define bfin_write_DMA2_6_Y_COUNT(val) bfin_write16(DMA2_6_Y_COUNT,val) +#define bfin_read_DMA2_6_X_MODIFY() bfin_read16(DMA2_6_X_MODIFY) +#define bfin_write_DMA2_6_X_MODIFY(val) bfin_write16(DMA2_6_X_MODIFY,val) +#define bfin_read_DMA2_6_Y_MODIFY() bfin_read16(DMA2_6_Y_MODIFY) +#define bfin_write_DMA2_6_Y_MODIFY(val) bfin_write16(DMA2_6_Y_MODIFY,val) +#define bfin_read_DMA2_6_CURR_DESC_PTR() bfin_read32(DMA2_6_CURR_DESC_PTR) +#define bfin_write_DMA2_6_CURR_DESC_PTR(val) bfin_write32(DMA2_6_CURR_DESC_PTR,val) +#define bfin_read_DMA2_6_CURR_ADDR() bfin_read32(DMA2_6_CURR_ADDR) +#define bfin_write_DMA2_6_CURR_ADDR(val) bfin_write32(DMA2_6_CURR_ADDR,val) +#define bfin_read_DMA2_6_CURR_X_COUNT() bfin_read16(DMA2_6_CURR_X_COUNT) +#define bfin_write_DMA2_6_CURR_X_COUNT(val) bfin_write16(DMA2_6_CURR_X_COUNT,val) +#define bfin_read_DMA2_6_CURR_Y_COUNT() bfin_read16(DMA2_6_CURR_Y_COUNT) +#define bfin_write_DMA2_6_CURR_Y_COUNT(val) bfin_write16(DMA2_6_CURR_Y_COUNT,val) +#define bfin_read_DMA2_6_IRQ_STATUS() bfin_read16(DMA2_6_IRQ_STATUS) +#define bfin_write_DMA2_6_IRQ_STATUS(val) bfin_write16(DMA2_6_IRQ_STATUS,val) +#define bfin_read_DMA2_6_PERIPHERAL_MAP() bfin_read16(DMA2_6_PERIPHERAL_MAP) +#define bfin_write_DMA2_6_PERIPHERAL_MAP(val) bfin_write16(DMA2_6_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_7_CONFIG() bfin_read16(DMA2_7_CONFIG) +#define bfin_write_DMA2_7_CONFIG(val) bfin_write16(DMA2_7_CONFIG,val) +#define bfin_read_DMA2_7_NEXT_DESC_PTR() bfin_read32(DMA2_7_NEXT_DESC_PTR) +#define bfin_write_DMA2_7_NEXT_DESC_PTR(val) bfin_write32(DMA2_7_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_7_START_ADDR() bfin_read32(DMA2_7_START_ADDR) +#define bfin_write_DMA2_7_START_ADDR(val) bfin_write32(DMA2_7_START_ADDR,val) +#define bfin_read_DMA2_7_X_COUNT() bfin_read16(DMA2_7_X_COUNT) +#define bfin_write_DMA2_7_X_COUNT(val) bfin_write16(DMA2_7_X_COUNT,val) +#define bfin_read_DMA2_7_Y_COUNT() bfin_read16(DMA2_7_Y_COUNT) +#define bfin_write_DMA2_7_Y_COUNT(val) bfin_write16(DMA2_7_Y_COUNT,val) +#define bfin_read_DMA2_7_X_MODIFY() bfin_read16(DMA2_7_X_MODIFY) +#define bfin_write_DMA2_7_X_MODIFY(val) bfin_write16(DMA2_7_X_MODIFY,val) +#define bfin_read_DMA2_7_Y_MODIFY() bfin_read16(DMA2_7_Y_MODIFY) +#define bfin_write_DMA2_7_Y_MODIFY(val) bfin_write16(DMA2_7_Y_MODIFY,val) +#define bfin_read_DMA2_7_CURR_DESC_PTR() bfin_read32(DMA2_7_CURR_DESC_PTR) +#define bfin_write_DMA2_7_CURR_DESC_PTR(val) bfin_write32(DMA2_7_CURR_DESC_PTR,val) +#define bfin_read_DMA2_7_CURR_ADDR() bfin_read32(DMA2_7_CURR_ADDR) +#define bfin_write_DMA2_7_CURR_ADDR(val) bfin_write32(DMA2_7_CURR_ADDR,val) +#define bfin_read_DMA2_7_CURR_X_COUNT() bfin_read16(DMA2_7_CURR_X_COUNT) +#define bfin_write_DMA2_7_CURR_X_COUNT(val) bfin_write16(DMA2_7_CURR_X_COUNT,val) +#define bfin_read_DMA2_7_CURR_Y_COUNT() bfin_read16(DMA2_7_CURR_Y_COUNT) +#define bfin_write_DMA2_7_CURR_Y_COUNT(val) bfin_write16(DMA2_7_CURR_Y_COUNT,val) +#define bfin_read_DMA2_7_IRQ_STATUS() bfin_read16(DMA2_7_IRQ_STATUS) +#define bfin_write_DMA2_7_IRQ_STATUS(val) bfin_write16(DMA2_7_IRQ_STATUS,val) +#define bfin_read_DMA2_7_PERIPHERAL_MAP() bfin_read16(DMA2_7_PERIPHERAL_MAP) +#define bfin_write_DMA2_7_PERIPHERAL_MAP(val) bfin_write16(DMA2_7_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_8_CONFIG() bfin_read16(DMA2_8_CONFIG) +#define bfin_write_DMA2_8_CONFIG(val) bfin_write16(DMA2_8_CONFIG,val) +#define bfin_read_DMA2_8_NEXT_DESC_PTR() bfin_read32(DMA2_8_NEXT_DESC_PTR) +#define bfin_write_DMA2_8_NEXT_DESC_PTR(val) bfin_write32(DMA2_8_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_8_START_ADDR() bfin_read32(DMA2_8_START_ADDR) +#define bfin_write_DMA2_8_START_ADDR(val) bfin_write32(DMA2_8_START_ADDR,val) +#define bfin_read_DMA2_8_X_COUNT() bfin_read16(DMA2_8_X_COUNT) +#define bfin_write_DMA2_8_X_COUNT(val) bfin_write16(DMA2_8_X_COUNT,val) +#define bfin_read_DMA2_8_Y_COUNT() bfin_read16(DMA2_8_Y_COUNT) +#define bfin_write_DMA2_8_Y_COUNT(val) bfin_write16(DMA2_8_Y_COUNT,val) +#define bfin_read_DMA2_8_X_MODIFY() bfin_read16(DMA2_8_X_MODIFY) +#define bfin_write_DMA2_8_X_MODIFY(val) bfin_write16(DMA2_8_X_MODIFY,val) +#define bfin_read_DMA2_8_Y_MODIFY() bfin_read16(DMA2_8_Y_MODIFY) +#define bfin_write_DMA2_8_Y_MODIFY(val) bfin_write16(DMA2_8_Y_MODIFY,val) +#define bfin_read_DMA2_8_CURR_DESC_PTR() bfin_read32(DMA2_8_CURR_DESC_PTR) +#define bfin_write_DMA2_8_CURR_DESC_PTR(val) bfin_write32(DMA2_8_CURR_DESC_PTR,val) +#define bfin_read_DMA2_8_CURR_ADDR() bfin_read32(DMA2_8_CURR_ADDR) +#define bfin_write_DMA2_8_CURR_ADDR(val) bfin_write32(DMA2_8_CURR_ADDR,val) +#define bfin_read_DMA2_8_CURR_X_COUNT() bfin_read16(DMA2_8_CURR_X_COUNT) +#define bfin_write_DMA2_8_CURR_X_COUNT(val) bfin_write16(DMA2_8_CURR_X_COUNT,val) +#define bfin_read_DMA2_8_CURR_Y_COUNT() bfin_read16(DMA2_8_CURR_Y_COUNT) +#define bfin_write_DMA2_8_CURR_Y_COUNT(val) bfin_write16(DMA2_8_CURR_Y_COUNT,val) +#define bfin_read_DMA2_8_IRQ_STATUS() bfin_read16(DMA2_8_IRQ_STATUS) +#define bfin_write_DMA2_8_IRQ_STATUS(val) bfin_write16(DMA2_8_IRQ_STATUS,val) +#define bfin_read_DMA2_8_PERIPHERAL_MAP() bfin_read16(DMA2_8_PERIPHERAL_MAP) +#define bfin_write_DMA2_8_PERIPHERAL_MAP(val) bfin_write16(DMA2_8_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_9_CONFIG() bfin_read16(DMA2_9_CONFIG) +#define bfin_write_DMA2_9_CONFIG(val) bfin_write16(DMA2_9_CONFIG,val) +#define bfin_read_DMA2_9_NEXT_DESC_PTR() bfin_read32(DMA2_9_NEXT_DESC_PTR) +#define bfin_write_DMA2_9_NEXT_DESC_PTR(val) bfin_write32(DMA2_9_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_9_START_ADDR() bfin_read32(DMA2_9_START_ADDR) +#define bfin_write_DMA2_9_START_ADDR(val) bfin_write32(DMA2_9_START_ADDR,val) +#define bfin_read_DMA2_9_X_COUNT() bfin_read16(DMA2_9_X_COUNT) +#define bfin_write_DMA2_9_X_COUNT(val) bfin_write16(DMA2_9_X_COUNT,val) +#define bfin_read_DMA2_9_Y_COUNT() bfin_read16(DMA2_9_Y_COUNT) +#define bfin_write_DMA2_9_Y_COUNT(val) bfin_write16(DMA2_9_Y_COUNT,val) +#define bfin_read_DMA2_9_X_MODIFY() bfin_read16(DMA2_9_X_MODIFY) +#define bfin_write_DMA2_9_X_MODIFY(val) bfin_write16(DMA2_9_X_MODIFY,val) +#define bfin_read_DMA2_9_Y_MODIFY() bfin_read16(DMA2_9_Y_MODIFY) +#define bfin_write_DMA2_9_Y_MODIFY(val) bfin_write16(DMA2_9_Y_MODIFY,val) +#define bfin_read_DMA2_9_CURR_DESC_PTR() bfin_read32(DMA2_9_CURR_DESC_PTR) +#define bfin_write_DMA2_9_CURR_DESC_PTR(val) bfin_write32(DMA2_9_CURR_DESC_PTR,val) +#define bfin_read_DMA2_9_CURR_ADDR() bfin_read32(DMA2_9_CURR_ADDR) +#define bfin_write_DMA2_9_CURR_ADDR(val) bfin_write32(DMA2_9_CURR_ADDR,val) +#define bfin_read_DMA2_9_CURR_X_COUNT() bfin_read16(DMA2_9_CURR_X_COUNT) +#define bfin_write_DMA2_9_CURR_X_COUNT(val) bfin_write16(DMA2_9_CURR_X_COUNT,val) +#define bfin_read_DMA2_9_CURR_Y_COUNT() bfin_read16(DMA2_9_CURR_Y_COUNT) +#define bfin_write_DMA2_9_CURR_Y_COUNT(val) bfin_write16(DMA2_9_CURR_Y_COUNT,val) +#define bfin_read_DMA2_9_IRQ_STATUS() bfin_read16(DMA2_9_IRQ_STATUS) +#define bfin_write_DMA2_9_IRQ_STATUS(val) bfin_write16(DMA2_9_IRQ_STATUS,val) +#define bfin_read_DMA2_9_PERIPHERAL_MAP() bfin_read16(DMA2_9_PERIPHERAL_MAP) +#define bfin_write_DMA2_9_PERIPHERAL_MAP(val) bfin_write16(DMA2_9_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_10_CONFIG() bfin_read16(DMA2_10_CONFIG) +#define bfin_write_DMA2_10_CONFIG(val) bfin_write16(DMA2_10_CONFIG,val) +#define bfin_read_DMA2_10_NEXT_DESC_PTR() bfin_read32(DMA2_10_NEXT_DESC_PTR) +#define bfin_write_DMA2_10_NEXT_DESC_PTR(val) bfin_write32(DMA2_10_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_10_START_ADDR() bfin_read32(DMA2_10_START_ADDR) +#define bfin_write_DMA2_10_START_ADDR(val) bfin_write32(DMA2_10_START_ADDR,val) +#define bfin_read_DMA2_10_X_COUNT() bfin_read16(DMA2_10_X_COUNT) +#define bfin_write_DMA2_10_X_COUNT(val) bfin_write16(DMA2_10_X_COUNT,val) +#define bfin_read_DMA2_10_Y_COUNT() bfin_read16(DMA2_10_Y_COUNT) +#define bfin_write_DMA2_10_Y_COUNT(val) bfin_write16(DMA2_10_Y_COUNT,val) +#define bfin_read_DMA2_10_X_MODIFY() bfin_read16(DMA2_10_X_MODIFY) +#define bfin_write_DMA2_10_X_MODIFY(val) bfin_write16(DMA2_10_X_MODIFY,val) +#define bfin_read_DMA2_10_Y_MODIFY() bfin_read16(DMA2_10_Y_MODIFY) +#define bfin_write_DMA2_10_Y_MODIFY(val) bfin_write16(DMA2_10_Y_MODIFY,val) +#define bfin_read_DMA2_10_CURR_DESC_PTR() bfin_read32(DMA2_10_CURR_DESC_PTR) +#define bfin_write_DMA2_10_CURR_DESC_PTR(val) bfin_write32(DMA2_10_CURR_DESC_PTR,val) +#define bfin_read_DMA2_10_CURR_ADDR() bfin_read32(DMA2_10_CURR_ADDR) +#define bfin_write_DMA2_10_CURR_ADDR(val) bfin_write32(DMA2_10_CURR_ADDR,val) +#define bfin_read_DMA2_10_CURR_X_COUNT() bfin_read16(DMA2_10_CURR_X_COUNT) +#define bfin_write_DMA2_10_CURR_X_COUNT(val) bfin_write16(DMA2_10_CURR_X_COUNT,val) +#define bfin_read_DMA2_10_CURR_Y_COUNT() bfin_read16(DMA2_10_CURR_Y_COUNT) +#define bfin_write_DMA2_10_CURR_Y_COUNT(val) bfin_write16(DMA2_10_CURR_Y_COUNT,val) +#define bfin_read_DMA2_10_IRQ_STATUS() bfin_read16(DMA2_10_IRQ_STATUS) +#define bfin_write_DMA2_10_IRQ_STATUS(val) bfin_write16(DMA2_10_IRQ_STATUS,val) +#define bfin_read_DMA2_10_PERIPHERAL_MAP() bfin_read16(DMA2_10_PERIPHERAL_MAP) +#define bfin_write_DMA2_10_PERIPHERAL_MAP(val) bfin_write16(DMA2_10_PERIPHERAL_MAP,val) +#define bfin_read_DMA2_11_CONFIG() bfin_read16(DMA2_11_CONFIG) +#define bfin_write_DMA2_11_CONFIG(val) bfin_write16(DMA2_11_CONFIG,val) +#define bfin_read_DMA2_11_NEXT_DESC_PTR() bfin_read32(DMA2_11_NEXT_DESC_PTR) +#define bfin_write_DMA2_11_NEXT_DESC_PTR(val) bfin_write32(DMA2_11_NEXT_DESC_PTR,val) +#define bfin_read_DMA2_11_START_ADDR() bfin_read32(DMA2_11_START_ADDR) +#define bfin_write_DMA2_11_START_ADDR(val) bfin_write32(DMA2_11_START_ADDR,val) +#define bfin_read_DMA2_11_X_COUNT() bfin_read16(DMA2_11_X_COUNT) +#define bfin_write_DMA2_11_X_COUNT(val) bfin_write16(DMA2_11_X_COUNT,val) +#define bfin_read_DMA2_11_Y_COUNT() bfin_read16(DMA2_11_Y_COUNT) +#define bfin_write_DMA2_11_Y_COUNT(val) bfin_write16(DMA2_11_Y_COUNT,val) +#define bfin_read_DMA2_11_X_MODIFY() bfin_read16(DMA2_11_X_MODIFY) +#define bfin_write_DMA2_11_X_MODIFY(val) bfin_write16(DMA2_11_X_MODIFY,val) +#define bfin_read_DMA2_11_Y_MODIFY() bfin_read16(DMA2_11_Y_MODIFY) +#define bfin_write_DMA2_11_Y_MODIFY(val) bfin_write16(DMA2_11_Y_MODIFY,val) +#define bfin_read_DMA2_11_CURR_DESC_PTR() bfin_read32(DMA2_11_CURR_DESC_PTR) +#define bfin_write_DMA2_11_CURR_DESC_PTR(val) bfin_write32(DMA2_11_CURR_DESC_PTR,val) +#define bfin_read_DMA2_11_CURR_ADDR() bfin_read32(DMA2_11_CURR_ADDR) +#define bfin_write_DMA2_11_CURR_ADDR(val) bfin_write32(DMA2_11_CURR_ADDR,val) +#define bfin_read_DMA2_11_CURR_X_COUNT() bfin_read16(DMA2_11_CURR_X_COUNT) +#define bfin_write_DMA2_11_CURR_X_COUNT(val) bfin_write16(DMA2_11_CURR_X_COUNT,val) +#define bfin_read_DMA2_11_CURR_Y_COUNT() bfin_read16(DMA2_11_CURR_Y_COUNT) +#define bfin_write_DMA2_11_CURR_Y_COUNT(val) bfin_write16(DMA2_11_CURR_Y_COUNT,val) +#define bfin_read_DMA2_11_IRQ_STATUS() bfin_read16(DMA2_11_IRQ_STATUS) +#define bfin_write_DMA2_11_IRQ_STATUS(val) bfin_write16(DMA2_11_IRQ_STATUS,val) +#define bfin_read_DMA2_11_PERIPHERAL_MAP() bfin_read16(DMA2_11_PERIPHERAL_MAP) +#define bfin_write_DMA2_11_PERIPHERAL_MAP(val) bfin_write16(DMA2_11_PERIPHERAL_MAP,val) +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define bfin_read_MDMA2_D0_CONFIG() bfin_read16(MDMA2_D0_CONFIG) +#define bfin_write_MDMA2_D0_CONFIG(val) bfin_write16(MDMA2_D0_CONFIG,val) +#define bfin_read_MDMA2_D0_NEXT_DESC_PTR() bfin_read32(MDMA2_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA2_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA2_D0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA2_D0_START_ADDR() bfin_read32(MDMA2_D0_START_ADDR) +#define bfin_write_MDMA2_D0_START_ADDR(val) bfin_write32(MDMA2_D0_START_ADDR,val) +#define bfin_read_MDMA2_D0_X_COUNT() bfin_read16(MDMA2_D0_X_COUNT) +#define bfin_write_MDMA2_D0_X_COUNT(val) bfin_write16(MDMA2_D0_X_COUNT,val) +#define bfin_read_MDMA2_D0_Y_COUNT() bfin_read16(MDMA2_D0_Y_COUNT) +#define bfin_write_MDMA2_D0_Y_COUNT(val) bfin_write16(MDMA2_D0_Y_COUNT,val) +#define bfin_read_MDMA2_D0_X_MODIFY() bfin_read16(MDMA2_D0_X_MODIFY) +#define bfin_write_MDMA2_D0_X_MODIFY(val) bfin_write16(MDMA2_D0_X_MODIFY,val) +#define bfin_read_MDMA2_D0_Y_MODIFY() bfin_read16(MDMA2_D0_Y_MODIFY) +#define bfin_write_MDMA2_D0_Y_MODIFY(val) bfin_write16(MDMA2_D0_Y_MODIFY,val) +#define bfin_read_MDMA2_D0_CURR_DESC_PTR() bfin_read32(MDMA2_D0_CURR_DESC_PTR) +#define bfin_write_MDMA2_D0_CURR_DESC_PTR(val) bfin_write32(MDMA2_D0_CURR_DESC_PTR,val) +#define bfin_read_MDMA2_D0_CURR_ADDR() bfin_read32(MDMA2_D0_CURR_ADDR) +#define bfin_write_MDMA2_D0_CURR_ADDR(val) bfin_write32(MDMA2_D0_CURR_ADDR,val) +#define bfin_read_MDMA2_D0_CURR_X_COUNT() bfin_read16(MDMA2_D0_CURR_X_COUNT) +#define bfin_write_MDMA2_D0_CURR_X_COUNT(val) bfin_write16(MDMA2_D0_CURR_X_COUNT,val) +#define bfin_read_MDMA2_D0_CURR_Y_COUNT() bfin_read16(MDMA2_D0_CURR_Y_COUNT) +#define bfin_write_MDMA2_D0_CURR_Y_COUNT(val) bfin_write16(MDMA2_D0_CURR_Y_COUNT,val) +#define bfin_read_MDMA2_D0_IRQ_STATUS() bfin_read16(MDMA2_D0_IRQ_STATUS) +#define bfin_write_MDMA2_D0_IRQ_STATUS(val) bfin_write16(MDMA2_D0_IRQ_STATUS,val) +#define bfin_read_MDMA2_D0_PERIPHERAL_MAP() bfin_read16(MDMA2_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA2_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA2_D0_PERIPHERAL_MAP,val) +#define bfin_read_MDMA2_S0_CONFIG() bfin_read16(MDMA2_S0_CONFIG) +#define bfin_write_MDMA2_S0_CONFIG(val) bfin_write16(MDMA2_S0_CONFIG,val) +#define bfin_read_MDMA2_S0_NEXT_DESC_PTR() bfin_read32(MDMA2_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA2_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA2_S0_NEXT_DESC_PTR,val) +#define bfin_read_MDMA2_S0_START_ADDR() bfin_read32(MDMA2_S0_START_ADDR) +#define bfin_write_MDMA2_S0_START_ADDR(val) bfin_write32(MDMA2_S0_START_ADDR,val) +#define bfin_read_MDMA2_S0_X_COUNT() bfin_read16(MDMA2_S0_X_COUNT) +#define bfin_write_MDMA2_S0_X_COUNT(val) bfin_write16(MDMA2_S0_X_COUNT,val) +#define bfin_read_MDMA2_S0_Y_COUNT() bfin_read16(MDMA2_S0_Y_COUNT) +#define bfin_write_MDMA2_S0_Y_COUNT(val) bfin_write16(MDMA2_S0_Y_COUNT,val) +#define bfin_read_MDMA2_S0_X_MODIFY() bfin_read16(MDMA2_S0_X_MODIFY) +#define bfin_write_MDMA2_S0_X_MODIFY(val) bfin_write16(MDMA2_S0_X_MODIFY,val) +#define bfin_read_MDMA2_S0_Y_MODIFY() bfin_read16(MDMA2_S0_Y_MODIFY) +#define bfin_write_MDMA2_S0_Y_MODIFY(val) bfin_write16(MDMA2_S0_Y_MODIFY,val) +#define bfin_read_MDMA2_S0_CURR_DESC_PTR() bfin_read32(MDMA2_S0_CURR_DESC_PTR) +#define bfin_write_MDMA2_S0_CURR_DESC_PTR(val) bfin_write32(MDMA2_S0_CURR_DESC_PTR,val) +#define bfin_read_MDMA2_S0_CURR_ADDR() bfin_read32(MDMA2_S0_CURR_ADDR) +#define bfin_write_MDMA2_S0_CURR_ADDR(val) bfin_write32(MDMA2_S0_CURR_ADDR,val) +#define bfin_read_MDMA2_S0_CURR_X_COUNT() bfin_read16(MDMA2_S0_CURR_X_COUNT) +#define bfin_write_MDMA2_S0_CURR_X_COUNT(val) bfin_write16(MDMA2_S0_CURR_X_COUNT,val) +#define bfin_read_MDMA2_S0_CURR_Y_COUNT() bfin_read16(MDMA2_S0_CURR_Y_COUNT) +#define bfin_write_MDMA2_S0_CURR_Y_COUNT(val) bfin_write16(MDMA2_S0_CURR_Y_COUNT,val) +#define bfin_read_MDMA2_S0_IRQ_STATUS() bfin_read16(MDMA2_S0_IRQ_STATUS) +#define bfin_write_MDMA2_S0_IRQ_STATUS(val) bfin_write16(MDMA2_S0_IRQ_STATUS,val) +#define bfin_read_MDMA2_S0_PERIPHERAL_MAP() bfin_read16(MDMA2_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA2_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA2_S0_PERIPHERAL_MAP,val) +#define bfin_read_MDMA2_D1_CONFIG() bfin_read16(MDMA2_D1_CONFIG) +#define bfin_write_MDMA2_D1_CONFIG(val) bfin_write16(MDMA2_D1_CONFIG,val) +#define bfin_read_MDMA2_D1_NEXT_DESC_PTR() bfin_read32(MDMA2_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA2_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA2_D1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA2_D1_START_ADDR() bfin_read32(MDMA2_D1_START_ADDR) +#define bfin_write_MDMA2_D1_START_ADDR(val) bfin_write32(MDMA2_D1_START_ADDR,val) +#define bfin_read_MDMA2_D1_X_COUNT() bfin_read16(MDMA2_D1_X_COUNT) +#define bfin_write_MDMA2_D1_X_COUNT(val) bfin_write16(MDMA2_D1_X_COUNT,val) +#define bfin_read_MDMA2_D1_Y_COUNT() bfin_read16(MDMA2_D1_Y_COUNT) +#define bfin_write_MDMA2_D1_Y_COUNT(val) bfin_write16(MDMA2_D1_Y_COUNT,val) +#define bfin_read_MDMA2_D1_X_MODIFY() bfin_read16(MDMA2_D1_X_MODIFY) +#define bfin_write_MDMA2_D1_X_MODIFY(val) bfin_write16(MDMA2_D1_X_MODIFY,val) +#define bfin_read_MDMA2_D1_Y_MODIFY() bfin_read16(MDMA2_D1_Y_MODIFY) +#define bfin_write_MDMA2_D1_Y_MODIFY(val) bfin_write16(MDMA2_D1_Y_MODIFY,val) +#define bfin_read_MDMA2_D1_CURR_DESC_PTR() bfin_read32(MDMA2_D1_CURR_DESC_PTR) +#define bfin_write_MDMA2_D1_CURR_DESC_PTR(val) bfin_write32(MDMA2_D1_CURR_DESC_PTR,val) +#define bfin_read_MDMA2_D1_CURR_ADDR() bfin_read32(MDMA2_D1_CURR_ADDR) +#define bfin_write_MDMA2_D1_CURR_ADDR(val) bfin_write32(MDMA2_D1_CURR_ADDR,val) +#define bfin_read_MDMA2_D1_CURR_X_COUNT() bfin_read16(MDMA2_D1_CURR_X_COUNT) +#define bfin_write_MDMA2_D1_CURR_X_COUNT(val) bfin_write16(MDMA2_D1_CURR_X_COUNT,val) +#define bfin_read_MDMA2_D1_CURR_Y_COUNT() bfin_read16(MDMA2_D1_CURR_Y_COUNT) +#define bfin_write_MDMA2_D1_CURR_Y_COUNT(val) bfin_write16(MDMA2_D1_CURR_Y_COUNT,val) +#define bfin_read_MDMA2_D1_IRQ_STATUS() bfin_read16(MDMA2_D1_IRQ_STATUS) +#define bfin_write_MDMA2_D1_IRQ_STATUS(val) bfin_write16(MDMA2_D1_IRQ_STATUS,val) +#define bfin_read_MDMA2_D1_PERIPHERAL_MAP() bfin_read16(MDMA2_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA2_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA2_D1_PERIPHERAL_MAP,val) +#define bfin_read_MDMA2_S1_CONFIG() bfin_read16(MDMA2_S1_CONFIG) +#define bfin_write_MDMA2_S1_CONFIG(val) bfin_write16(MDMA2_S1_CONFIG,val) +#define bfin_read_MDMA2_S1_NEXT_DESC_PTR() bfin_read32(MDMA2_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA2_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA2_S1_NEXT_DESC_PTR,val) +#define bfin_read_MDMA2_S1_START_ADDR() bfin_read32(MDMA2_S1_START_ADDR) +#define bfin_write_MDMA2_S1_START_ADDR(val) bfin_write32(MDMA2_S1_START_ADDR,val) +#define bfin_read_MDMA2_S1_X_COUNT() bfin_read16(MDMA2_S1_X_COUNT) +#define bfin_write_MDMA2_S1_X_COUNT(val) bfin_write16(MDMA2_S1_X_COUNT,val) +#define bfin_read_MDMA2_S1_Y_COUNT() bfin_read16(MDMA2_S1_Y_COUNT) +#define bfin_write_MDMA2_S1_Y_COUNT(val) bfin_write16(MDMA2_S1_Y_COUNT,val) +#define bfin_read_MDMA2_S1_X_MODIFY() bfin_read16(MDMA2_S1_X_MODIFY) +#define bfin_write_MDMA2_S1_X_MODIFY(val) bfin_write16(MDMA2_S1_X_MODIFY,val) +#define bfin_read_MDMA2_S1_Y_MODIFY() bfin_read16(MDMA2_S1_Y_MODIFY) +#define bfin_write_MDMA2_S1_Y_MODIFY(val) bfin_write16(MDMA2_S1_Y_MODIFY,val) +#define bfin_read_MDMA2_S1_CURR_DESC_PTR() bfin_read32(MDMA2_S1_CURR_DESC_PTR) +#define bfin_write_MDMA2_S1_CURR_DESC_PTR(val) bfin_write32(MDMA2_S1_CURR_DESC_PTR,val) +#define bfin_read_MDMA2_S1_CURR_ADDR() bfin_read32(MDMA2_S1_CURR_ADDR) +#define bfin_write_MDMA2_S1_CURR_ADDR(val) bfin_write32(MDMA2_S1_CURR_ADDR,val) +#define bfin_read_MDMA2_S1_CURR_X_COUNT() bfin_read16(MDMA2_S1_CURR_X_COUNT) +#define bfin_write_MDMA2_S1_CURR_X_COUNT(val) bfin_write16(MDMA2_S1_CURR_X_COUNT,val) +#define bfin_read_MDMA2_S1_CURR_Y_COUNT() bfin_read16(MDMA2_S1_CURR_Y_COUNT) +#define bfin_write_MDMA2_S1_CURR_Y_COUNT(val) bfin_write16(MDMA2_S1_CURR_Y_COUNT,val) +#define bfin_read_MDMA2_S1_IRQ_STATUS() bfin_read16(MDMA2_S1_IRQ_STATUS) +#define bfin_write_MDMA2_S1_IRQ_STATUS(val) bfin_write16(MDMA2_S1_IRQ_STATUS,val) +#define bfin_read_MDMA2_S1_PERIPHERAL_MAP() bfin_read16(MDMA2_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA2_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA2_S1_PERIPHERAL_MAP,val) +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define bfin_read_IMDMA_D0_CONFIG() bfin_read16(IMDMA_D0_CONFIG) +#define bfin_write_IMDMA_D0_CONFIG(val) bfin_write16(IMDMA_D0_CONFIG,val) +#define bfin_read_IMDMA_D0_NEXT_DESC_PTR() bfin_read32(IMDMA_D0_NEXT_DESC_PTR) +#define bfin_write_IMDMA_D0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D0_NEXT_DESC_PTR,val) +#define bfin_read_IMDMA_D0_START_ADDR() bfin_read32(IMDMA_D0_START_ADDR) +#define bfin_write_IMDMA_D0_START_ADDR(val) bfin_write32(IMDMA_D0_START_ADDR,val) +#define bfin_read_IMDMA_D0_X_COUNT() bfin_read16(IMDMA_D0_X_COUNT) +#define bfin_write_IMDMA_D0_X_COUNT(val) bfin_write16(IMDMA_D0_X_COUNT,val) +#define bfin_read_IMDMA_D0_Y_COUNT() bfin_read16(IMDMA_D0_Y_COUNT) +#define bfin_write_IMDMA_D0_Y_COUNT(val) bfin_write16(IMDMA_D0_Y_COUNT,val) +#define bfin_read_IMDMA_D0_X_MODIFY() bfin_read16(IMDMA_D0_X_MODIFY) +#define bfin_write_IMDMA_D0_X_MODIFY(val) bfin_write16(IMDMA_D0_X_MODIFY,val) +#define bfin_read_IMDMA_D0_Y_MODIFY() bfin_read16(IMDMA_D0_Y_MODIFY) +#define bfin_write_IMDMA_D0_Y_MODIFY(val) bfin_write16(IMDMA_D0_Y_MODIFY,val) +#define bfin_read_IMDMA_D0_CURR_DESC_PTR() bfin_read32(IMDMA_D0_CURR_DESC_PTR) +#define bfin_write_IMDMA_D0_CURR_DESC_PTR(val) bfin_write32(IMDMA_D0_CURR_DESC_PTR,val) +#define bfin_read_IMDMA_D0_CURR_ADDR() bfin_read32(IMDMA_D0_CURR_ADDR) +#define bfin_write_IMDMA_D0_CURR_ADDR(val) bfin_write32(IMDMA_D0_CURR_ADDR,val) +#define bfin_read_IMDMA_D0_CURR_X_COUNT() bfin_read16(IMDMA_D0_CURR_X_COUNT) +#define bfin_write_IMDMA_D0_CURR_X_COUNT(val) bfin_write16(IMDMA_D0_CURR_X_COUNT,val) +#define bfin_read_IMDMA_D0_CURR_Y_COUNT() bfin_read16(IMDMA_D0_CURR_Y_COUNT) +#define bfin_write_IMDMA_D0_CURR_Y_COUNT(val) bfin_write16(IMDMA_D0_CURR_Y_COUNT,val) +#define bfin_read_IMDMA_D0_IRQ_STATUS() bfin_read16(IMDMA_D0_IRQ_STATUS) +#define bfin_write_IMDMA_D0_IRQ_STATUS(val) bfin_write16(IMDMA_D0_IRQ_STATUS,val) +#define bfin_read_IMDMA_S0_CONFIG() bfin_read16(IMDMA_S0_CONFIG) +#define bfin_write_IMDMA_S0_CONFIG(val) bfin_write16(IMDMA_S0_CONFIG,val) +#define bfin_read_IMDMA_S0_NEXT_DESC_PTR() bfin_read32(IMDMA_S0_NEXT_DESC_PTR) +#define bfin_write_IMDMA_S0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S0_NEXT_DESC_PTR,val) +#define bfin_read_IMDMA_S0_START_ADDR() bfin_read32(IMDMA_S0_START_ADDR) +#define bfin_write_IMDMA_S0_START_ADDR(val) bfin_write32(IMDMA_S0_START_ADDR,val) +#define bfin_read_IMDMA_S0_X_COUNT() bfin_read16(IMDMA_S0_X_COUNT) +#define bfin_write_IMDMA_S0_X_COUNT(val) bfin_write16(IMDMA_S0_X_COUNT,val) +#define bfin_read_IMDMA_S0_Y_COUNT() bfin_read16(IMDMA_S0_Y_COUNT) +#define bfin_write_IMDMA_S0_Y_COUNT(val) bfin_write16(IMDMA_S0_Y_COUNT,val) +#define bfin_read_IMDMA_S0_X_MODIFY() bfin_read16(IMDMA_S0_X_MODIFY) +#define bfin_write_IMDMA_S0_X_MODIFY(val) bfin_write16(IMDMA_S0_X_MODIFY,val) +#define bfin_read_IMDMA_S0_Y_MODIFY() bfin_read16(IMDMA_S0_Y_MODIFY) +#define bfin_write_IMDMA_S0_Y_MODIFY(val) bfin_write16(IMDMA_S0_Y_MODIFY,val) +#define bfin_read_IMDMA_S0_CURR_DESC_PTR() bfin_read32(IMDMA_S0_CURR_DESC_PTR) +#define bfin_write_IMDMA_S0_CURR_DESC_PTR(val) bfin_write32(IMDMA_S0_CURR_DESC_PTR,val) +#define bfin_read_IMDMA_S0_CURR_ADDR() bfin_read32(IMDMA_S0_CURR_ADDR) +#define bfin_write_IMDMA_S0_CURR_ADDR(val) bfin_write32(IMDMA_S0_CURR_ADDR,val) +#define bfin_read_IMDMA_S0_CURR_X_COUNT() bfin_read16(IMDMA_S0_CURR_X_COUNT) +#define bfin_write_IMDMA_S0_CURR_X_COUNT(val) bfin_write16(IMDMA_S0_CURR_X_COUNT,val) +#define bfin_read_IMDMA_S0_CURR_Y_COUNT() bfin_read16(IMDMA_S0_CURR_Y_COUNT) +#define bfin_write_IMDMA_S0_CURR_Y_COUNT(val) bfin_write16(IMDMA_S0_CURR_Y_COUNT,val) +#define bfin_read_IMDMA_S0_IRQ_STATUS() bfin_read16(IMDMA_S0_IRQ_STATUS) +#define bfin_write_IMDMA_S0_IRQ_STATUS(val) bfin_write16(IMDMA_S0_IRQ_STATUS,val) +#define bfin_read_IMDMA_D1_CONFIG() bfin_read16(IMDMA_D1_CONFIG) +#define bfin_write_IMDMA_D1_CONFIG(val) bfin_write16(IMDMA_D1_CONFIG,val) +#define bfin_read_IMDMA_D1_NEXT_DESC_PTR() bfin_read32(IMDMA_D1_NEXT_DESC_PTR) +#define bfin_write_IMDMA_D1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D1_NEXT_DESC_PTR,val) +#define bfin_read_IMDMA_D1_START_ADDR() bfin_read32(IMDMA_D1_START_ADDR) +#define bfin_write_IMDMA_D1_START_ADDR(val) bfin_write32(IMDMA_D1_START_ADDR,val) +#define bfin_read_IMDMA_D1_X_COUNT() bfin_read16(IMDMA_D1_X_COUNT) +#define bfin_write_IMDMA_D1_X_COUNT(val) bfin_write16(IMDMA_D1_X_COUNT,val) +#define bfin_read_IMDMA_D1_Y_COUNT() bfin_read16(IMDMA_D1_Y_COUNT) +#define bfin_write_IMDMA_D1_Y_COUNT(val) bfin_write16(IMDMA_D1_Y_COUNT,val) +#define bfin_read_IMDMA_D1_X_MODIFY() bfin_read16(IMDMA_D1_X_MODIFY) +#define bfin_write_IMDMA_D1_X_MODIFY(val) bfin_write16(IMDMA_D1_X_MODIFY,val) +#define bfin_read_IMDMA_D1_Y_MODIFY() bfin_read16(IMDMA_D1_Y_MODIFY) +#define bfin_write_IMDMA_D1_Y_MODIFY(val) bfin_write16(IMDMA_D1_Y_MODIFY,val) +#define bfin_read_IMDMA_D1_CURR_DESC_PTR() bfin_read32(IMDMA_D1_CURR_DESC_PTR) +#define bfin_write_IMDMA_D1_CURR_DESC_PTR(val) bfin_write32(IMDMA_D1_CURR_DESC_PTR,val) +#define bfin_read_IMDMA_D1_CURR_ADDR() bfin_read32(IMDMA_D1_CURR_ADDR) +#define bfin_write_IMDMA_D1_CURR_ADDR(val) bfin_write32(IMDMA_D1_CURR_ADDR,val) +#define bfin_read_IMDMA_D1_CURR_X_COUNT() bfin_read16(IMDMA_D1_CURR_X_COUNT) +#define bfin_write_IMDMA_D1_CURR_X_COUNT(val) bfin_write16(IMDMA_D1_CURR_X_COUNT,val) +#define bfin_read_IMDMA_D1_CURR_Y_COUNT() bfin_read16(IMDMA_D1_CURR_Y_COUNT) +#define bfin_write_IMDMA_D1_CURR_Y_COUNT(val) bfin_write16(IMDMA_D1_CURR_Y_COUNT,val) +#define bfin_read_IMDMA_D1_IRQ_STATUS() bfin_read16(IMDMA_D1_IRQ_STATUS) +#define bfin_write_IMDMA_D1_IRQ_STATUS(val) bfin_write16(IMDMA_D1_IRQ_STATUS,val) +#define bfin_read_IMDMA_S1_CONFIG() bfin_read16(IMDMA_S1_CONFIG) +#define bfin_write_IMDMA_S1_CONFIG(val) bfin_write16(IMDMA_S1_CONFIG,val) +#define bfin_read_IMDMA_S1_NEXT_DESC_PTR() bfin_read32(IMDMA_S1_NEXT_DESC_PTR) +#define bfin_write_IMDMA_S1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S1_NEXT_DESC_PTR,val) +#define bfin_read_IMDMA_S1_START_ADDR() bfin_read32(IMDMA_S1_START_ADDR) +#define bfin_write_IMDMA_S1_START_ADDR(val) bfin_write32(IMDMA_S1_START_ADDR,val) +#define bfin_read_IMDMA_S1_X_COUNT() bfin_read16(IMDMA_S1_X_COUNT) +#define bfin_write_IMDMA_S1_X_COUNT(val) bfin_write16(IMDMA_S1_X_COUNT,val) +#define bfin_read_IMDMA_S1_Y_COUNT() bfin_read16(IMDMA_S1_Y_COUNT) +#define bfin_write_IMDMA_S1_Y_COUNT(val) bfin_write16(IMDMA_S1_Y_COUNT,val) +#define bfin_read_IMDMA_S1_X_MODIFY() bfin_read16(IMDMA_S1_X_MODIFY) +#define bfin_write_IMDMA_S1_X_MODIFY(val) bfin_write16(IMDMA_S1_X_MODIFY,val) +#define bfin_read_IMDMA_S1_Y_MODIFY() bfin_read16(IMDMA_S1_Y_MODIFY) +#define bfin_write_IMDMA_S1_Y_MODIFY(val) bfin_write16(IMDMA_S1_Y_MODIFY,val) +#define bfin_read_IMDMA_S1_CURR_DESC_PTR() bfin_read32(IMDMA_S1_CURR_DESC_PTR) +#define bfin_write_IMDMA_S1_CURR_DESC_PTR(val) bfin_write32(IMDMA_S1_CURR_DESC_PTR,val) +#define bfin_read_IMDMA_S1_CURR_ADDR() bfin_read32(IMDMA_S1_CURR_ADDR) +#define bfin_write_IMDMA_S1_CURR_ADDR(val) bfin_write32(IMDMA_S1_CURR_ADDR,val) +#define bfin_read_IMDMA_S1_CURR_X_COUNT() bfin_read16(IMDMA_S1_CURR_X_COUNT) +#define bfin_write_IMDMA_S1_CURR_X_COUNT(val) bfin_write16(IMDMA_S1_CURR_X_COUNT,val) +#define bfin_read_IMDMA_S1_CURR_Y_COUNT() bfin_read16(IMDMA_S1_CURR_Y_COUNT) +#define bfin_write_IMDMA_S1_CURR_Y_COUNT(val) bfin_write16(IMDMA_S1_CURR_Y_COUNT,val) +#define bfin_read_IMDMA_S1_IRQ_STATUS() bfin_read16(IMDMA_S1_IRQ_STATUS) +#define bfin_write_IMDMA_S1_IRQ_STATUS(val) bfin_write16(IMDMA_S1_IRQ_STATUS,val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read_MDMA1_S0_CONFIG() +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write_MDMA1_S0_CONFIG(val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read_MDMA1_S0_IRQ_STATUS() +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write_MDMA1_S0_IRQ_STATUS(val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read_MDMA1_S0_X_MODIFY() +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write_MDMA1_S0_X_MODIFY(val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read_MDMA1_S0_Y_MODIFY() +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write_MDMA1_S0_Y_MODIFY(val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read_MDMA1_S0_X_COUNT() +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write_MDMA1_S0_X_COUNT(val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read_MDMA1_S0_Y_COUNT() +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write_MDMA1_S0_Y_COUNT(val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read_MDMA1_S0_START_ADDR() +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write_MDMA1_S0_START_ADDR(val) +#define bfin_read_MDMA_D0_CONFIG() bfin_read_MDMA1_D0_CONFIG() +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write_MDMA1_D0_CONFIG(val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read_MDMA1_D0_IRQ_STATUS() +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write_MDMA1_D0_IRQ_STATUS(val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read_MDMA1_D0_X_MODIFY() +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write_MDMA1_D0_X_MODIFY(val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read_MDMA1_D0_Y_MODIFY() +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write_MDMA1_D0_Y_MODIFY(val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read_MDMA1_D0_X_COUNT() +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write_MDMA1_D0_X_COUNT(val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read_MDMA1_D0_Y_COUNT() +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write_MDMA1_D0_Y_COUNT(val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read_MDMA1_D0_START_ADDR() +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA1_D0_START_ADDR(val) + +#endif /* _CDEF_BF561_H */ diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h new file mode 100644 index 0000000000..a6de4c69ba --- /dev/null +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -0,0 +1,1717 @@ + +/* + * File: include/asm-blackfin/mach-bf561/defBF561.h + * Based on: + * Author: + * + * Created: + * Description: + * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF561_H +#define _DEF_BF561_H +/* +#if !defined(__ADSPBF561__) +#warning defBF561.h should only be included for BF561 chip. +#endif +*/ +/* include all Core registers and bit definitions */ +#include + +/*********************************************************************************** */ +/* System MMR Register Map */ +/*********************************************************************************** */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ + +#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID Register */ + +/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ +#define SICA_SWRST 0xFFC00100 /* Software Reset register */ +#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define SICA_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SICA_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 - hack to fix old tests */ +#define SICA_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */ +#define SICA_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */ +#define SICA_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ +#define SICA_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ +#define SICA_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ +#define SICA_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */ +#define SICA_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */ +#define SICA_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */ +#define SICA_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */ +#define SICA_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */ +#define SICA_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */ +#define SICA_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */ +#define SICA_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICA_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */ +#define SICB_SWRST 0xFFC01100 /* reserved */ +#define SICB_SYSCR 0xFFC01104 /* reserved */ +#define SICB_RVECT 0xFFC01108 /* SIC Reset Vector Address Register */ +#define SICB_IMASK0 0xFFC0110C /* SIC Interrupt Mask register 0 */ +#define SICB_IMASK1 0xFFC01110 /* SIC Interrupt Mask register 1 */ +#define SICB_IAR0 0xFFC01124 /* SIC Interrupt Assignment Register 0 */ +#define SICB_IAR1 0xFFC01128 /* SIC Interrupt Assignment Register 1 */ +#define SICB_IAR2 0xFFC0112C /* SIC Interrupt Assignment Register 2 */ +#define SICB_IAR3 0xFFC01130 /* SIC Interrupt Assignment Register 3 */ +#define SICB_IAR4 0xFFC01134 /* SIC Interrupt Assignment Register 4 */ +#define SICB_IAR5 0xFFC01138 /* SIC Interrupt Assignment Register 5 */ +#define SICB_IAR6 0xFFC0113C /* SIC Interrupt Assignment Register 6 */ +#define SICB_IAR7 0xFFC01140 /* SIC Interrupt Assignment Register 7 */ +#define SICB_ISR0 0xFFC01114 /* SIC Interrupt Status register 0 */ +#define SICB_ISR1 0xFFC01118 /* SIC Interrupt Status register 1 */ +#define SICB_IWR0 0xFFC0111C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICB_IWR1 0xFFC01120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define WDOGA_CTL 0xFFC00200 /* Watchdog Control register */ +#define WDOGA_CNT 0xFFC00204 /* Watchdog Count register */ +#define WDOGA_STAT 0xFFC00208 /* Watchdog Status register */ + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define WDOGB_CTL 0xFFC01200 /* Watchdog Control register */ +#define WDOGB_CNT 0xFFC01204 /* Watchdog Count register */ +#define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART_THR 0xFFC00400 /* Transmit Holding register */ +#define UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART_LCR 0xFFC0040C /* Line Control Register */ +#define UART_MCR 0xFFC00410 /* Modem Control Register */ +#define UART_LSR 0xFFC00414 /* Line Status Register */ +#define UART_MSR 0xFFC00418 /* Modem Status Register */ +#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer0 Configuration register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer0 Counter register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer0 Period register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer0 Width register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer1 Configuration register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer1 Counter register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer1 Period register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer1 Width register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer2 Configuration register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer2 Counter register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer2 Period register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer2 Width register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer3 Configuration register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer3 Counter register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer3 Period register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer3 Width register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer4 Configuration register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer4 Counter register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer4 Period register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer4 Width register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer5 Configuration register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer5 Counter register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer5 Period register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer5 Width register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer6 Configuration register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer6 Counter register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer6 Period register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer6 Width register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer7 Configuration register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer7 Counter register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer7 Period register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer7 Width register */ + +#define TMRS8_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TMRS8_DISABLE 0xFFC00684 /* Timer Disable register */ +#define TMRS8_STATUS 0xFFC00688 /* Timer Status register */ + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define TIMER8_CONFIG 0xFFC01600 /* Timer8 Configuration register */ +#define TIMER8_COUNTER 0xFFC01604 /* Timer8 Counter register */ +#define TIMER8_PERIOD 0xFFC01608 /* Timer8 Period register */ +#define TIMER8_WIDTH 0xFFC0160C /* Timer8 Width register */ + +#define TIMER9_CONFIG 0xFFC01610 /* Timer9 Configuration register */ +#define TIMER9_COUNTER 0xFFC01614 /* Timer9 Counter register */ +#define TIMER9_PERIOD 0xFFC01618 /* Timer9 Period register */ +#define TIMER9_WIDTH 0xFFC0161C /* Timer9 Width register */ + +#define TIMER10_CONFIG 0xFFC01620 /* Timer10 Configuration register */ +#define TIMER10_COUNTER 0xFFC01624 /* Timer10 Counter register */ +#define TIMER10_PERIOD 0xFFC01628 /* Timer10 Period register */ +#define TIMER10_WIDTH 0xFFC0162C /* Timer10 Width register */ + +#define TIMER11_CONFIG 0xFFC01630 /* Timer11 Configuration register */ +#define TIMER11_COUNTER 0xFFC01634 /* Timer11 Counter register */ +#define TIMER11_PERIOD 0xFFC01638 /* Timer11 Period register */ +#define TIMER11_WIDTH 0xFFC0163C /* Timer11 Width register */ + +#define TMRS4_ENABLE 0xFFC01640 /* Timer Enable Register */ +#define TMRS4_DISABLE 0xFFC01644 /* Timer Disable register */ +#define TMRS4_STATUS 0xFFC01648 /* Timer Status register */ + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define FIO0_FLAG_D 0xFFC00700 /* Flag Data register */ +#define FIO0_FLAG_C 0xFFC00704 /* Flag Clear register */ +#define FIO0_FLAG_S 0xFFC00708 /* Flag Set register */ +#define FIO0_FLAG_T 0xFFC0070C /* Flag Toggle register */ +#define FIO0_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */ +#define FIO0_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */ +#define FIO0_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */ +#define FIO0_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */ +#define FIO0_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */ +#define FIO0_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */ +#define FIO0_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */ +#define FIO0_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */ +#define FIO0_DIR 0xFFC00730 /* Flag Direction register */ +#define FIO0_POLAR 0xFFC00734 /* Flag Polarity register */ +#define FIO0_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */ +#define FIO0_BOTH 0xFFC0073C /* Flag Set on Both Edges register */ +#define FIO0_INEN 0xFFC00740 /* Flag Input Enable register */ + +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define FIO1_FLAG_D 0xFFC01500 /* Flag Data register (mask used to directly */ +#define FIO1_FLAG_C 0xFFC01504 /* Flag Clear register */ +#define FIO1_FLAG_S 0xFFC01508 /* Flag Set register */ +#define FIO1_FLAG_T 0xFFC0150C /* Flag Toggle register (mask used to */ +#define FIO1_MASKA_D 0xFFC01510 /* Flag Mask Interrupt A Data register */ +#define FIO1_MASKA_C 0xFFC01514 /* Flag Mask Interrupt A Clear register */ +#define FIO1_MASKA_S 0xFFC01518 /* Flag Mask Interrupt A Set register */ +#define FIO1_MASKA_T 0xFFC0151C /* Flag Mask Interrupt A Toggle register */ +#define FIO1_MASKB_D 0xFFC01520 /* Flag Mask Interrupt B Data register */ +#define FIO1_MASKB_C 0xFFC01524 /* Flag Mask Interrupt B Clear register */ +#define FIO1_MASKB_S 0xFFC01528 /* Flag Mask Interrupt B Set register */ +#define FIO1_MASKB_T 0xFFC0152C /* Flag Mask Interrupt B Toggle register */ +#define FIO1_DIR 0xFFC01530 /* Flag Direction register */ +#define FIO1_POLAR 0xFFC01534 /* Flag Polarity register */ +#define FIO1_EDGE 0xFFC01538 /* Flag Interrupt Sensitivity register */ +#define FIO1_BOTH 0xFFC0153C /* Flag Set on Both Edges register */ +#define FIO1_INEN 0xFFC01540 /* Flag Input Enable register */ + +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define FIO2_FLAG_D 0xFFC01700 /* Flag Data register (mask used to directly */ +#define FIO2_FLAG_C 0xFFC01704 /* Flag Clear register */ +#define FIO2_FLAG_S 0xFFC01708 /* Flag Set register */ +#define FIO2_FLAG_T 0xFFC0170C /* Flag Toggle register (mask used to */ +#define FIO2_MASKA_D 0xFFC01710 /* Flag Mask Interrupt A Data register */ +#define FIO2_MASKA_C 0xFFC01714 /* Flag Mask Interrupt A Clear register */ +#define FIO2_MASKA_S 0xFFC01718 /* Flag Mask Interrupt A Set register */ +#define FIO2_MASKA_T 0xFFC0171C /* Flag Mask Interrupt A Toggle register */ +#define FIO2_MASKB_D 0xFFC01720 /* Flag Mask Interrupt B Data register */ +#define FIO2_MASKB_C 0xFFC01724 /* Flag Mask Interrupt B Clear register */ +#define FIO2_MASKB_S 0xFFC01728 /* Flag Mask Interrupt B Set register */ +#define FIO2_MASKB_T 0xFFC0172C /* Flag Mask Interrupt B Toggle register */ +#define FIO2_DIR 0xFFC01730 /* Flag Direction register */ +#define FIO2_POLAR 0xFFC01734 /* Flag Polarity register */ +#define FIO2_EDGE 0xFFC01738 /* Flag Interrupt Sensitivity register */ +#define FIO2_BOTH 0xFFC0173C /* Flag Set on Both Edges register */ +#define FIO2_INEN 0xFFC01740 /* Flag Input Enable register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define PPI0_CONTROL 0xFFC01000 /* PPI0 Control register */ +#define PPI0_STATUS 0xFFC01004 /* PPI0 Status register */ +#define PPI0_COUNT 0xFFC01008 /* PPI0 Transfer Count register */ +#define PPI0_DELAY 0xFFC0100C /* PPI0 Delay Count register */ +#define PPI0_FRAME 0xFFC01010 /* PPI0 Frame Length register */ + +/*Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */ +#define PPI1_CONTROL 0xFFC01300 /* PPI1 Control register */ +#define PPI1_STATUS 0xFFC01304 /* PPI1 Status register */ +#define PPI1_COUNT 0xFFC01308 /* PPI1 Transfer Count register */ +#define PPI1_DELAY 0xFFC0130C /* PPI1 Delay Count register */ +#define PPI1_FRAME 0xFFC01310 /* PPI1 Frame Length register */ + +/*DMA traffic control registers */ +#define DMA1_TC_PER 0xFFC01B0C /* Traffic control periods */ +#define DMA1_TC_CNT 0xFFC01B10 /* Traffic control current counts */ +#define DMA2_TC_PER 0xFFC00B0C /* Traffic control periods */ +#define DMA2_TC_CNT 0xFFC00B10 /* Traffic control current counts */ + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define DMA1_0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */ +#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */ +#define DMA1_0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */ +#define DMA1_0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */ +#define DMA1_0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */ +#define DMA1_0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */ +#define DMA1_0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */ +#define DMA1_0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */ +#define DMA1_0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */ +#define DMA1_0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */ +#define DMA1_0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */ +#define DMA1_0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt/Status Register */ +#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */ + +#define DMA1_1_CONFIG 0xFFC01C48 /* DMA1 Channel 1 Configuration register */ +#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40 /* DMA1 Channel 1 Next Descripter Ptr Reg */ +#define DMA1_1_START_ADDR 0xFFC01C44 /* DMA1 Channel 1 Start Address */ +#define DMA1_1_X_COUNT 0xFFC01C50 /* DMA1 Channel 1 Inner Loop Count */ +#define DMA1_1_Y_COUNT 0xFFC01C58 /* DMA1 Channel 1 Outer Loop Count */ +#define DMA1_1_X_MODIFY 0xFFC01C54 /* DMA1 Channel 1 Inner Loop Addr Increment */ +#define DMA1_1_Y_MODIFY 0xFFC01C5C /* DMA1 Channel 1 Outer Loop Addr Increment */ +#define DMA1_1_CURR_DESC_PTR 0xFFC01C60 /* DMA1 Channel 1 Current Descriptor Pointer */ +#define DMA1_1_CURR_ADDR 0xFFC01C64 /* DMA1 Channel 1 Current Address Pointer */ +#define DMA1_1_CURR_X_COUNT 0xFFC01C70 /* DMA1 Channel 1 Current Inner Loop Count */ +#define DMA1_1_CURR_Y_COUNT 0xFFC01C78 /* DMA1 Channel 1 Current Outer Loop Count */ +#define DMA1_1_IRQ_STATUS 0xFFC01C68 /* DMA1 Channel 1 Interrupt/Status Register */ +#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C /* DMA1 Channel 1 Peripheral Map Register */ + +#define DMA1_2_CONFIG 0xFFC01C88 /* DMA1 Channel 2 Configuration register */ +#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80 /* DMA1 Channel 2 Next Descripter Ptr Reg */ +#define DMA1_2_START_ADDR 0xFFC01C84 /* DMA1 Channel 2 Start Address */ +#define DMA1_2_X_COUNT 0xFFC01C90 /* DMA1 Channel 2 Inner Loop Count */ +#define DMA1_2_Y_COUNT 0xFFC01C98 /* DMA1 Channel 2 Outer Loop Count */ +#define DMA1_2_X_MODIFY 0xFFC01C94 /* DMA1 Channel 2 Inner Loop Addr Increment */ +#define DMA1_2_Y_MODIFY 0xFFC01C9C /* DMA1 Channel 2 Outer Loop Addr Increment */ +#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0 /* DMA1 Channel 2 Current Descriptor Pointer */ +#define DMA1_2_CURR_ADDR 0xFFC01CA4 /* DMA1 Channel 2 Current Address Pointer */ +#define DMA1_2_CURR_X_COUNT 0xFFC01CB0 /* DMA1 Channel 2 Current Inner Loop Count */ +#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8 /* DMA1 Channel 2 Current Outer Loop Count */ +#define DMA1_2_IRQ_STATUS 0xFFC01CA8 /* DMA1 Channel 2 Interrupt/Status Register */ +#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC /* DMA1 Channel 2 Peripheral Map Register */ + +#define DMA1_3_CONFIG 0xFFC01CC8 /* DMA1 Channel 3 Configuration register */ +#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0 /* DMA1 Channel 3 Next Descripter Ptr Reg */ +#define DMA1_3_START_ADDR 0xFFC01CC4 /* DMA1 Channel 3 Start Address */ +#define DMA1_3_X_COUNT 0xFFC01CD0 /* DMA1 Channel 3 Inner Loop Count */ +#define DMA1_3_Y_COUNT 0xFFC01CD8 /* DMA1 Channel 3 Outer Loop Count */ +#define DMA1_3_X_MODIFY 0xFFC01CD4 /* DMA1 Channel 3 Inner Loop Addr Increment */ +#define DMA1_3_Y_MODIFY 0xFFC01CDC /* DMA1 Channel 3 Outer Loop Addr Increment */ +#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0 /* DMA1 Channel 3 Current Descriptor Pointer */ +#define DMA1_3_CURR_ADDR 0xFFC01CE4 /* DMA1 Channel 3 Current Address Pointer */ +#define DMA1_3_CURR_X_COUNT 0xFFC01CF0 /* DMA1 Channel 3 Current Inner Loop Count */ +#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8 /* DMA1 Channel 3 Current Outer Loop Count */ +#define DMA1_3_IRQ_STATUS 0xFFC01CE8 /* DMA1 Channel 3 Interrupt/Status Register */ +#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC /* DMA1 Channel 3 Peripheral Map Register */ + +#define DMA1_4_CONFIG 0xFFC01D08 /* DMA1 Channel 4 Configuration register */ +#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00 /* DMA1 Channel 4 Next Descripter Ptr Reg */ +#define DMA1_4_START_ADDR 0xFFC01D04 /* DMA1 Channel 4 Start Address */ +#define DMA1_4_X_COUNT 0xFFC01D10 /* DMA1 Channel 4 Inner Loop Count */ +#define DMA1_4_Y_COUNT 0xFFC01D18 /* DMA1 Channel 4 Outer Loop Count */ +#define DMA1_4_X_MODIFY 0xFFC01D14 /* DMA1 Channel 4 Inner Loop Addr Increment */ +#define DMA1_4_Y_MODIFY 0xFFC01D1C /* DMA1 Channel 4 Outer Loop Addr Increment */ +#define DMA1_4_CURR_DESC_PTR 0xFFC01D20 /* DMA1 Channel 4 Current Descriptor Pointer */ +#define DMA1_4_CURR_ADDR 0xFFC01D24 /* DMA1 Channel 4 Current Address Pointer */ +#define DMA1_4_CURR_X_COUNT 0xFFC01D30 /* DMA1 Channel 4 Current Inner Loop Count */ +#define DMA1_4_CURR_Y_COUNT 0xFFC01D38 /* DMA1 Channel 4 Current Outer Loop Count */ +#define DMA1_4_IRQ_STATUS 0xFFC01D28 /* DMA1 Channel 4 Interrupt/Status Register */ +#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C /* DMA1 Channel 4 Peripheral Map Register */ + +#define DMA1_5_CONFIG 0xFFC01D48 /* DMA1 Channel 5 Configuration register */ +#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40 /* DMA1 Channel 5 Next Descripter Ptr Reg */ +#define DMA1_5_START_ADDR 0xFFC01D44 /* DMA1 Channel 5 Start Address */ +#define DMA1_5_X_COUNT 0xFFC01D50 /* DMA1 Channel 5 Inner Loop Count */ +#define DMA1_5_Y_COUNT 0xFFC01D58 /* DMA1 Channel 5 Outer Loop Count */ +#define DMA1_5_X_MODIFY 0xFFC01D54 /* DMA1 Channel 5 Inner Loop Addr Increment */ +#define DMA1_5_Y_MODIFY 0xFFC01D5C /* DMA1 Channel 5 Outer Loop Addr Increment */ +#define DMA1_5_CURR_DESC_PTR 0xFFC01D60 /* DMA1 Channel 5 Current Descriptor Pointer */ +#define DMA1_5_CURR_ADDR 0xFFC01D64 /* DMA1 Channel 5 Current Address Pointer */ +#define DMA1_5_CURR_X_COUNT 0xFFC01D70 /* DMA1 Channel 5 Current Inner Loop Count */ +#define DMA1_5_CURR_Y_COUNT 0xFFC01D78 /* DMA1 Channel 5 Current Outer Loop Count */ +#define DMA1_5_IRQ_STATUS 0xFFC01D68 /* DMA1 Channel 5 Interrupt/Status Register */ +#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C /* DMA1 Channel 5 Peripheral Map Register */ + +#define DMA1_6_CONFIG 0xFFC01D88 /* DMA1 Channel 6 Configuration register */ +#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80 /* DMA1 Channel 6 Next Descripter Ptr Reg */ +#define DMA1_6_START_ADDR 0xFFC01D84 /* DMA1 Channel 6 Start Address */ +#define DMA1_6_X_COUNT 0xFFC01D90 /* DMA1 Channel 6 Inner Loop Count */ +#define DMA1_6_Y_COUNT 0xFFC01D98 /* DMA1 Channel 6 Outer Loop Count */ +#define DMA1_6_X_MODIFY 0xFFC01D94 /* DMA1 Channel 6 Inner Loop Addr Increment */ +#define DMA1_6_Y_MODIFY 0xFFC01D9C /* DMA1 Channel 6 Outer Loop Addr Increment */ +#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0 /* DMA1 Channel 6 Current Descriptor Pointer */ +#define DMA1_6_CURR_ADDR 0xFFC01DA4 /* DMA1 Channel 6 Current Address Pointer */ +#define DMA1_6_CURR_X_COUNT 0xFFC01DB0 /* DMA1 Channel 6 Current Inner Loop Count */ +#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8 /* DMA1 Channel 6 Current Outer Loop Count */ +#define DMA1_6_IRQ_STATUS 0xFFC01DA8 /* DMA1 Channel 6 Interrupt/Status Register */ +#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC /* DMA1 Channel 6 Peripheral Map Register */ + +#define DMA1_7_CONFIG 0xFFC01DC8 /* DMA1 Channel 7 Configuration register */ +#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0 /* DMA1 Channel 7 Next Descripter Ptr Reg */ +#define DMA1_7_START_ADDR 0xFFC01DC4 /* DMA1 Channel 7 Start Address */ +#define DMA1_7_X_COUNT 0xFFC01DD0 /* DMA1 Channel 7 Inner Loop Count */ +#define DMA1_7_Y_COUNT 0xFFC01DD8 /* DMA1 Channel 7 Outer Loop Count */ +#define DMA1_7_X_MODIFY 0xFFC01DD4 /* DMA1 Channel 7 Inner Loop Addr Increment */ +#define DMA1_7_Y_MODIFY 0xFFC01DDC /* DMA1 Channel 7 Outer Loop Addr Increment */ +#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0 /* DMA1 Channel 7 Current Descriptor Pointer */ +#define DMA1_7_CURR_ADDR 0xFFC01DE4 /* DMA1 Channel 7 Current Address Pointer */ +#define DMA1_7_CURR_X_COUNT 0xFFC01DF0 /* DMA1 Channel 7 Current Inner Loop Count */ +#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8 /* DMA1 Channel 7 Current Outer Loop Count */ +#define DMA1_7_IRQ_STATUS 0xFFC01DE8 /* DMA1 Channel 7 Interrupt/Status Register */ +#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC /* DMA1 Channel 7 Peripheral Map Register */ + +#define DMA1_8_CONFIG 0xFFC01E08 /* DMA1 Channel 8 Configuration register */ +#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00 /* DMA1 Channel 8 Next Descripter Ptr Reg */ +#define DMA1_8_START_ADDR 0xFFC01E04 /* DMA1 Channel 8 Start Address */ +#define DMA1_8_X_COUNT 0xFFC01E10 /* DMA1 Channel 8 Inner Loop Count */ +#define DMA1_8_Y_COUNT 0xFFC01E18 /* DMA1 Channel 8 Outer Loop Count */ +#define DMA1_8_X_MODIFY 0xFFC01E14 /* DMA1 Channel 8 Inner Loop Addr Increment */ +#define DMA1_8_Y_MODIFY 0xFFC01E1C /* DMA1 Channel 8 Outer Loop Addr Increment */ +#define DMA1_8_CURR_DESC_PTR 0xFFC01E20 /* DMA1 Channel 8 Current Descriptor Pointer */ +#define DMA1_8_CURR_ADDR 0xFFC01E24 /* DMA1 Channel 8 Current Address Pointer */ +#define DMA1_8_CURR_X_COUNT 0xFFC01E30 /* DMA1 Channel 8 Current Inner Loop Count */ +#define DMA1_8_CURR_Y_COUNT 0xFFC01E38 /* DMA1 Channel 8 Current Outer Loop Count */ +#define DMA1_8_IRQ_STATUS 0xFFC01E28 /* DMA1 Channel 8 Interrupt/Status Register */ +#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C /* DMA1 Channel 8 Peripheral Map Register */ + +#define DMA1_9_CONFIG 0xFFC01E48 /* DMA1 Channel 9 Configuration register */ +#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40 /* DMA1 Channel 9 Next Descripter Ptr Reg */ +#define DMA1_9_START_ADDR 0xFFC01E44 /* DMA1 Channel 9 Start Address */ +#define DMA1_9_X_COUNT 0xFFC01E50 /* DMA1 Channel 9 Inner Loop Count */ +#define DMA1_9_Y_COUNT 0xFFC01E58 /* DMA1 Channel 9 Outer Loop Count */ +#define DMA1_9_X_MODIFY 0xFFC01E54 /* DMA1 Channel 9 Inner Loop Addr Increment */ +#define DMA1_9_Y_MODIFY 0xFFC01E5C /* DMA1 Channel 9 Outer Loop Addr Increment */ +#define DMA1_9_CURR_DESC_PTR 0xFFC01E60 /* DMA1 Channel 9 Current Descriptor Pointer */ +#define DMA1_9_CURR_ADDR 0xFFC01E64 /* DMA1 Channel 9 Current Address Pointer */ +#define DMA1_9_CURR_X_COUNT 0xFFC01E70 /* DMA1 Channel 9 Current Inner Loop Count */ +#define DMA1_9_CURR_Y_COUNT 0xFFC01E78 /* DMA1 Channel 9 Current Outer Loop Count */ +#define DMA1_9_IRQ_STATUS 0xFFC01E68 /* DMA1 Channel 9 Interrupt/Status Register */ +#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C /* DMA1 Channel 9 Peripheral Map Register */ + +#define DMA1_10_CONFIG 0xFFC01E88 /* DMA1 Channel 10 Configuration register */ +#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80 /* DMA1 Channel 10 Next Descripter Ptr Reg */ +#define DMA1_10_START_ADDR 0xFFC01E84 /* DMA1 Channel 10 Start Address */ +#define DMA1_10_X_COUNT 0xFFC01E90 /* DMA1 Channel 10 Inner Loop Count */ +#define DMA1_10_Y_COUNT 0xFFC01E98 /* DMA1 Channel 10 Outer Loop Count */ +#define DMA1_10_X_MODIFY 0xFFC01E94 /* DMA1 Channel 10 Inner Loop Addr Increment */ +#define DMA1_10_Y_MODIFY 0xFFC01E9C /* DMA1 Channel 10 Outer Loop Addr Increment */ +#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0 /* DMA1 Channel 10 Current Descriptor Pointer */ +#define DMA1_10_CURR_ADDR 0xFFC01EA4 /* DMA1 Channel 10 Current Address Pointer */ +#define DMA1_10_CURR_X_COUNT 0xFFC01EB0 /* DMA1 Channel 10 Current Inner Loop Count */ +#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8 /* DMA1 Channel 10 Current Outer Loop Count */ +#define DMA1_10_IRQ_STATUS 0xFFC01EA8 /* DMA1 Channel 10 Interrupt/Status Register */ +#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC /* DMA1 Channel 10 Peripheral Map Register */ + +#define DMA1_11_CONFIG 0xFFC01EC8 /* DMA1 Channel 11 Configuration register */ +#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0 /* DMA1 Channel 11 Next Descripter Ptr Reg */ +#define DMA1_11_START_ADDR 0xFFC01EC4 /* DMA1 Channel 11 Start Address */ +#define DMA1_11_X_COUNT 0xFFC01ED0 /* DMA1 Channel 11 Inner Loop Count */ +#define DMA1_11_Y_COUNT 0xFFC01ED8 /* DMA1 Channel 11 Outer Loop Count */ +#define DMA1_11_X_MODIFY 0xFFC01ED4 /* DMA1 Channel 11 Inner Loop Addr Increment */ +#define DMA1_11_Y_MODIFY 0xFFC01EDC /* DMA1 Channel 11 Outer Loop Addr Increment */ +#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0 /* DMA1 Channel 11 Current Descriptor Pointer */ +#define DMA1_11_CURR_ADDR 0xFFC01EE4 /* DMA1 Channel 11 Current Address Pointer */ +#define DMA1_11_CURR_X_COUNT 0xFFC01EF0 /* DMA1 Channel 11 Current Inner Loop Count */ +#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8 /* DMA1 Channel 11 Current Outer Loop Count */ +#define DMA1_11_IRQ_STATUS 0xFFC01EE8 /* DMA1 Channel 11 Interrupt/Status Register */ +#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */ + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define MDMA1_D0_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */ +#define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D0_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */ +#define MDMA1_D0_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */ +#define MDMA1_D0_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */ +#define MDMA1_D0_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA1_D0_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA1_D0_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */ +#define MDMA1_D0_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */ +#define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */ +#define MDMA1_D0_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */ +#define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */ + +#define MDMA1_S0_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */ +#define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA1_S0_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */ +#define MDMA1_S0_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */ +#define MDMA1_S0_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */ +#define MDMA1_S0_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ +#define MDMA1_S0_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ +#define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA1_S0_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */ +#define MDMA1_S0_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */ +#define MDMA1_S0_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */ +#define MDMA1_S0_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */ +#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */ + +#define MDMA1_D1_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */ +#define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D1_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */ +#define MDMA1_D1_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */ +#define MDMA1_D1_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */ +#define MDMA1_D1_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA1_D1_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ +#define MDMA1_D1_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */ +#define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */ +#define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */ +#define MDMA1_D1_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */ +#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */ + +#define MDMA1_S1_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */ +#define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA1_S1_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */ +#define MDMA1_S1_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */ +#define MDMA1_S1_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */ +#define MDMA1_S1_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ +#define MDMA1_S1_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA1_S1_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */ +#define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */ +#define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */ +#define MDMA1_S1_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */ +#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */ + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ +#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */ +#define DMA2_0_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */ +#define DMA2_0_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */ +#define DMA2_0_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */ +#define DMA2_0_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */ +#define DMA2_0_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */ +#define DMA2_0_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */ +#define DMA2_0_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */ +#define DMA2_0_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */ +#define DMA2_0_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */ +#define DMA2_0_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt/Status Register */ +#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */ + +#define DMA2_1_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */ +#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */ +#define DMA2_1_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */ +#define DMA2_1_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */ +#define DMA2_1_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */ +#define DMA2_1_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */ +#define DMA2_1_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */ +#define DMA2_1_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */ +#define DMA2_1_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */ +#define DMA2_1_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */ +#define DMA2_1_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */ +#define DMA2_1_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt/Status Register */ +#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */ + +#define DMA2_2_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */ +#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */ +#define DMA2_2_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */ +#define DMA2_2_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */ +#define DMA2_2_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */ +#define DMA2_2_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */ +#define DMA2_2_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */ +#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */ +#define DMA2_2_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */ +#define DMA2_2_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */ +#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */ +#define DMA2_2_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt/Status Register */ +#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */ + +#define DMA2_3_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */ +#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */ +#define DMA2_3_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */ +#define DMA2_3_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */ +#define DMA2_3_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */ +#define DMA2_3_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */ +#define DMA2_3_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */ +#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */ +#define DMA2_3_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */ +#define DMA2_3_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */ +#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */ +#define DMA2_3_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt/Status Register */ +#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */ + +#define DMA2_4_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */ +#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */ +#define DMA2_4_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */ +#define DMA2_4_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */ +#define DMA2_4_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */ +#define DMA2_4_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */ +#define DMA2_4_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */ +#define DMA2_4_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */ +#define DMA2_4_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */ +#define DMA2_4_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */ +#define DMA2_4_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */ +#define DMA2_4_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt/Status Register */ +#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */ + +#define DMA2_5_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */ +#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */ +#define DMA2_5_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */ +#define DMA2_5_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */ +#define DMA2_5_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */ +#define DMA2_5_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */ +#define DMA2_5_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */ +#define DMA2_5_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */ +#define DMA2_5_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */ +#define DMA2_5_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */ +#define DMA2_5_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */ +#define DMA2_5_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt/Status Register */ +#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */ + +#define DMA2_6_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */ +#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */ +#define DMA2_6_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */ +#define DMA2_6_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */ +#define DMA2_6_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */ +#define DMA2_6_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */ +#define DMA2_6_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */ +#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */ +#define DMA2_6_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */ +#define DMA2_6_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */ +#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */ +#define DMA2_6_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt/Status Register */ +#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */ + +#define DMA2_7_CONFIG 0xFFC00DC8 /* DMA2 Channel 7 Configuration register */ +#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA2 Channel 7 Next Descripter Ptr Reg */ +#define DMA2_7_START_ADDR 0xFFC00DC4 /* DMA2 Channel 7 Start Address */ +#define DMA2_7_X_COUNT 0xFFC00DD0 /* DMA2 Channel 7 Inner Loop Count */ +#define DMA2_7_Y_COUNT 0xFFC00DD8 /* DMA2 Channel 7 Outer Loop Count */ +#define DMA2_7_X_MODIFY 0xFFC00DD4 /* DMA2 Channel 7 Inner Loop Addr Increment */ +#define DMA2_7_Y_MODIFY 0xFFC00DDC /* DMA2 Channel 7 Outer Loop Addr Increment */ +#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0 /* DMA2 Channel 7 Current Descriptor Pointer */ +#define DMA2_7_CURR_ADDR 0xFFC00DE4 /* DMA2 Channel 7 Current Address Pointer */ +#define DMA2_7_CURR_X_COUNT 0xFFC00DF0 /* DMA2 Channel 7 Current Inner Loop Count */ +#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8 /* DMA2 Channel 7 Current Outer Loop Count */ +#define DMA2_7_IRQ_STATUS 0xFFC00DE8 /* DMA2 Channel 7 Interrupt/Status Register */ +#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC /* DMA2 Channel 7 Peripheral Map Register */ + +#define DMA2_8_CONFIG 0xFFC00E08 /* DMA2 Channel 8 Configuration register */ +#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00 /* DMA2 Channel 8 Next Descripter Ptr Reg */ +#define DMA2_8_START_ADDR 0xFFC00E04 /* DMA2 Channel 8 Start Address */ +#define DMA2_8_X_COUNT 0xFFC00E10 /* DMA2 Channel 8 Inner Loop Count */ +#define DMA2_8_Y_COUNT 0xFFC00E18 /* DMA2 Channel 8 Outer Loop Count */ +#define DMA2_8_X_MODIFY 0xFFC00E14 /* DMA2 Channel 8 Inner Loop Addr Increment */ +#define DMA2_8_Y_MODIFY 0xFFC00E1C /* DMA2 Channel 8 Outer Loop Addr Increment */ +#define DMA2_8_CURR_DESC_PTR 0xFFC00E20 /* DMA2 Channel 8 Current Descriptor Pointer */ +#define DMA2_8_CURR_ADDR 0xFFC00E24 /* DMA2 Channel 8 Current Address Pointer */ +#define DMA2_8_CURR_X_COUNT 0xFFC00E30 /* DMA2 Channel 8 Current Inner Loop Count */ +#define DMA2_8_CURR_Y_COUNT 0xFFC00E38 /* DMA2 Channel 8 Current Outer Loop Count */ +#define DMA2_8_IRQ_STATUS 0xFFC00E28 /* DMA2 Channel 8 Interrupt/Status Register */ +#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C /* DMA2 Channel 8 Peripheral Map Register */ + +#define DMA2_9_CONFIG 0xFFC00E48 /* DMA2 Channel 9 Configuration register */ +#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40 /* DMA2 Channel 9 Next Descripter Ptr Reg */ +#define DMA2_9_START_ADDR 0xFFC00E44 /* DMA2 Channel 9 Start Address */ +#define DMA2_9_X_COUNT 0xFFC00E50 /* DMA2 Channel 9 Inner Loop Count */ +#define DMA2_9_Y_COUNT 0xFFC00E58 /* DMA2 Channel 9 Outer Loop Count */ +#define DMA2_9_X_MODIFY 0xFFC00E54 /* DMA2 Channel 9 Inner Loop Addr Increment */ +#define DMA2_9_Y_MODIFY 0xFFC00E5C /* DMA2 Channel 9 Outer Loop Addr Increment */ +#define DMA2_9_CURR_DESC_PTR 0xFFC00E60 /* DMA2 Channel 9 Current Descriptor Pointer */ +#define DMA2_9_CURR_ADDR 0xFFC00E64 /* DMA2 Channel 9 Current Address Pointer */ +#define DMA2_9_CURR_X_COUNT 0xFFC00E70 /* DMA2 Channel 9 Current Inner Loop Count */ +#define DMA2_9_CURR_Y_COUNT 0xFFC00E78 /* DMA2 Channel 9 Current Outer Loop Count */ +#define DMA2_9_IRQ_STATUS 0xFFC00E68 /* DMA2 Channel 9 Interrupt/Status Register */ +#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C /* DMA2 Channel 9 Peripheral Map Register */ + +#define DMA2_10_CONFIG 0xFFC00E88 /* DMA2 Channel 10 Configuration register */ +#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80 /* DMA2 Channel 10 Next Descripter Ptr Reg */ +#define DMA2_10_START_ADDR 0xFFC00E84 /* DMA2 Channel 10 Start Address */ +#define DMA2_10_X_COUNT 0xFFC00E90 /* DMA2 Channel 10 Inner Loop Count */ +#define DMA2_10_Y_COUNT 0xFFC00E98 /* DMA2 Channel 10 Outer Loop Count */ +#define DMA2_10_X_MODIFY 0xFFC00E94 /* DMA2 Channel 10 Inner Loop Addr Increment */ +#define DMA2_10_Y_MODIFY 0xFFC00E9C /* DMA2 Channel 10 Outer Loop Addr Increment */ +#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0 /* DMA2 Channel 10 Current Descriptor Pointer */ +#define DMA2_10_CURR_ADDR 0xFFC00EA4 /* DMA2 Channel 10 Current Address Pointer */ +#define DMA2_10_CURR_X_COUNT 0xFFC00EB0 /* DMA2 Channel 10 Current Inner Loop Count */ +#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8 /* DMA2 Channel 10 Current Outer Loop Count */ +#define DMA2_10_IRQ_STATUS 0xFFC00EA8 /* DMA2 Channel 10 Interrupt/Status Register */ +#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC /* DMA2 Channel 10 Peripheral Map Register */ + +#define DMA2_11_CONFIG 0xFFC00EC8 /* DMA2 Channel 11 Configuration register */ +#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA2 Channel 11 Next Descripter Ptr Reg */ +#define DMA2_11_START_ADDR 0xFFC00EC4 /* DMA2 Channel 11 Start Address */ +#define DMA2_11_X_COUNT 0xFFC00ED0 /* DMA2 Channel 11 Inner Loop Count */ +#define DMA2_11_Y_COUNT 0xFFC00ED8 /* DMA2 Channel 11 Outer Loop Count */ +#define DMA2_11_X_MODIFY 0xFFC00ED4 /* DMA2 Channel 11 Inner Loop Addr Increment */ +#define DMA2_11_Y_MODIFY 0xFFC00EDC /* DMA2 Channel 11 Outer Loop Addr Increment */ +#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0 /* DMA2 Channel 11 Current Descriptor Pointer */ +#define DMA2_11_CURR_ADDR 0xFFC00EE4 /* DMA2 Channel 11 Current Address Pointer */ +#define DMA2_11_CURR_X_COUNT 0xFFC00EF0 /* DMA2 Channel 11 Current Inner Loop Count */ +#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8 /* DMA2 Channel 11 Current Outer Loop Count */ +#define DMA2_11_IRQ_STATUS 0xFFC00EE8 /* DMA2 Channel 11 Interrupt/Status Register */ +#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */ + +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define MDMA2_D0_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */ +#define MDMA2_D0_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D0_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */ +#define MDMA2_D0_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */ +#define MDMA2_D0_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */ +#define MDMA2_D0_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA2_D0_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA2_D0_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA2_D0_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */ +#define MDMA2_D0_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */ +#define MDMA2_D0_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */ +#define MDMA2_D0_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */ +#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */ + +#define MDMA2_S0_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */ +#define MDMA2_S0_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA2_S0_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */ +#define MDMA2_S0_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */ +#define MDMA2_S0_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */ +#define MDMA2_S0_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */ +#define MDMA2_S0_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */ +#define MDMA2_S0_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA2_S0_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */ +#define MDMA2_S0_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */ +#define MDMA2_S0_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */ +#define MDMA2_S0_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */ +#define MDMA2_S0_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */ + +#define MDMA2_D1_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */ +#define MDMA2_D1_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D1_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */ +#define MDMA2_D1_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */ +#define MDMA2_D1_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */ +#define MDMA2_D1_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA2_D1_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA2_D1_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */ +#define MDMA2_D1_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */ +#define MDMA2_D1_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */ +#define MDMA2_D1_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */ +#define MDMA2_D1_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */ +#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */ + +#define MDMA2_S1_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */ +#define MDMA2_S1_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA2_S1_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */ +#define MDMA2_S1_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */ +#define MDMA2_S1_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */ +#define MDMA2_S1_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */ +#define MDMA2_S1_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA2_S1_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA2_S1_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */ +#define MDMA2_S1_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */ +#define MDMA2_S1_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */ +#define MDMA2_S1_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */ +#define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */ + +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define IMDMA_D0_CONFIG 0xFFC01808 /*IMDMA Stream 0 Destination Configuration */ +#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D0_START_ADDR 0xFFC01804 /*IMDMA Stream 0 Destination Start Address */ +#define IMDMA_D0_X_COUNT 0xFFC01810 /*IMDMA Stream 0 Destination Inner-Loop Count */ +#define IMDMA_D0_Y_COUNT 0xFFC01818 /*IMDMA Stream 0 Destination Outer-Loop Count */ +#define IMDMA_D0_X_MODIFY 0xFFC01814 /*IMDMA Stream 0 Dest Inner-Loop Address-Increment */ +#define IMDMA_D0_Y_MODIFY 0xFFC0181C /*IMDMA Stream 0 Dest Outer-Loop Address-Increment */ +#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 /*IMDMA Stream 0 Destination Current Descriptor Ptr */ +#define IMDMA_D0_CURR_ADDR 0xFFC01824 /*IMDMA Stream 0 Destination Current Address */ +#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 /*IMDMA Stream 0 Destination Current Inner-Loop Count */ +#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 /*IMDMA Stream 0 Destination Current Outer-Loop Count */ +#define IMDMA_D0_IRQ_STATUS 0xFFC01828 /*IMDMA Stream 0 Destination Interrupt/Status */ + +#define IMDMA_S0_CONFIG 0xFFC01848 /*IMDMA Stream 0 Source Configuration */ +#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 /*IMDMA Stream 0 Source Next Descriptor Ptr Reg */ +#define IMDMA_S0_START_ADDR 0xFFC01844 /*IMDMA Stream 0 Source Start Address */ +#define IMDMA_S0_X_COUNT 0xFFC01850 /*IMDMA Stream 0 Source Inner-Loop Count */ +#define IMDMA_S0_Y_COUNT 0xFFC01858 /*IMDMA Stream 0 Source Outer-Loop Count */ +#define IMDMA_S0_X_MODIFY 0xFFC01854 /*IMDMA Stream 0 Source Inner-Loop Address-Increment */ +#define IMDMA_S0_Y_MODIFY 0xFFC0185C /*IMDMA Stream 0 Source Outer-Loop Address-Increment */ +#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860 /*IMDMA Stream 0 Source Current Descriptor Ptr reg */ +#define IMDMA_S0_CURR_ADDR 0xFFC01864 /*IMDMA Stream 0 Source Current Address */ +#define IMDMA_S0_CURR_X_COUNT 0xFFC01870 /*IMDMA Stream 0 Source Current Inner-Loop Count */ +#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878 /*IMDMA Stream 0 Source Current Outer-Loop Count */ +#define IMDMA_S0_IRQ_STATUS 0xFFC01868 /*IMDMA Stream 0 Source Interrupt/Status */ + +#define IMDMA_D1_CONFIG 0xFFC01888 /*IMDMA Stream 1 Destination Configuration */ +#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 /*IMDMA Stream 1 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D1_START_ADDR 0xFFC01884 /*IMDMA Stream 1 Destination Start Address */ +#define IMDMA_D1_X_COUNT 0xFFC01890 /*IMDMA Stream 1 Destination Inner-Loop Count */ +#define IMDMA_D1_Y_COUNT 0xFFC01898 /*IMDMA Stream 1 Destination Outer-Loop Count */ +#define IMDMA_D1_X_MODIFY 0xFFC01894 /*IMDMA Stream 1 Dest Inner-Loop Address-Increment */ +#define IMDMA_D1_Y_MODIFY 0xFFC0189C /*IMDMA Stream 1 Dest Outer-Loop Address-Increment */ +#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 /*IMDMA Stream 1 Destination Current Descriptor Ptr */ +#define IMDMA_D1_CURR_ADDR 0xFFC018A4 /*IMDMA Stream 1 Destination Current Address */ +#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 /*IMDMA Stream 1 Destination Current Inner-Loop Count */ +#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 /*IMDMA Stream 1 Destination Current Outer-Loop Count */ +#define IMDMA_D1_IRQ_STATUS 0xFFC018A8 /*IMDMA Stream 1 Destination Interrupt/Status */ + +#define IMDMA_S1_CONFIG 0xFFC018C8 /*IMDMA Stream 1 Source Configuration */ +#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 /*IMDMA Stream 1 Source Next Descriptor Ptr Reg */ +#define IMDMA_S1_START_ADDR 0xFFC018C4 /*IMDMA Stream 1 Source Start Address */ +#define IMDMA_S1_X_COUNT 0xFFC018D0 /*IMDMA Stream 1 Source Inner-Loop Count */ +#define IMDMA_S1_Y_COUNT 0xFFC018D8 /*IMDMA Stream 1 Source Outer-Loop Count */ +#define IMDMA_S1_X_MODIFY 0xFFC018D4 /*IMDMA Stream 1 Source Inner-Loop Address-Increment */ +#define IMDMA_S1_Y_MODIFY 0xFFC018DC /*IMDMA Stream 1 Source Outer-Loop Address-Increment */ +#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0 /*IMDMA Stream 1 Source Current Descriptor Ptr reg */ +#define IMDMA_S1_CURR_ADDR 0xFFC018E4 /*IMDMA Stream 1 Source Current Address */ +#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0 /*IMDMA Stream 1 Source Current Inner-Loop Count */ +#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8 /*IMDMA Stream 1 Source Current Outer-Loop Count */ +#define IMDMA_S1_IRQ_STATUS 0xFFC018E8 /*IMDMA Stream 1 Source Interrupt/Status */ + +/*********************************************************************************** */ +/* System MMR Register Bits */ +/******************************************************************************* */ + +/* ********************* PLL AND RESET MASKS ************************ */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ +#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x00000008 /* Core clock off */ +#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ +#define BYPASS 0x00000100 /* Bypass the PLL */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* PLL_DIV Masks */ +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* SWRST Mask */ +#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ +#define SWRST_DBL_FAULT_B 0x00000800 /* SWRST Core B Double Fault */ +#define SWRST_DBL_FAULT_A 0x00001000 /* SWRST Core A Double Fault */ +#define SWRST_WDT_B 0x00002000 /* SWRST Watchdog B */ +#define SWRST_WDT_A 0x00004000 /* SWRST Watchdog A */ +#define SWRST_OCCURRED 0x00008000 /* SWRST Status */ + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ + +/* SICu_IARv Masks */ +/* u = A or B */ +/* v = 0 to 7 */ +/* w = 0 or 1 */ + +/* Per_number = 0 to 63 */ +/* IVG_number = 7 to 15 */ +#define Peripheral_IVG(Per_number, IVG_number) \ + ((IVG_number) - 7) << (((Per_number) % 8) * 4) /* Peripheral #Per_number assigned IVG #IVG_number */ + /* Usage: r0.l = lo(Peripheral_IVG(62, 10)); */ + /* r0.h = hi(Peripheral_IVG(62, 10)); */ + +/* SICx_IMASKw Masks */ +/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +/* x = pos 0 to 31, for 32-63 use value-32 */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ + +/* ********* WATCHDOG TIMER MASKS ********************8 */ + +/* Watchdog Timer WDOG_CTL Register */ +#define ICTL(x) ((x<<1) & 0x0006) +#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ +#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ +#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ +#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ + +#define TMR_EN 0x0000 +#define TMR_DIS 0x0AD0 +#define TRO 0x8000 + +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + +/* ***************************** UART CONTROLLER MASKS ********************** */ + +/* UART_LCR Register */ + +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* ********** SERIAL PORT MASKS ********************** */ + +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#define SLEN 0x001F /*TX Word Length */ +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN 0x001F /*RX Word Length */ +#define RXSE 0x0100 /*RX Secondary Enable */ +#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /*Right-First Data Order */ + +/*SPORTx_STAT Masks */ +#define RXNE 0x0001 /*RX FIFO Not Empty Status */ +#define RUVF 0x0002 /*RX Underflow Status */ +#define ROVF 0x0004 /*RX Overflow Status */ +#define TXF 0x0008 /*TX FIFO Full Status */ +#define TUVF 0x0010 /*TX Underflow Status */ +#define TOVF 0x0020 /*TX Overflow Status */ +#define TXHRE 0x0040 /*TX Hold Register Empty */ + +/*SPORTx_MCMC1 Masks */ +#define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ +#define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ + +/*SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ +#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /*Multichannel Frame Delay */ + +/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* ********** DMA CONTROLLER MASKS *********************8 */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define DMAFLOW 0x00007000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */ + +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */ + +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +/* ************* GENERAL PURPOSE TIMER MASKS ******************** */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 +#define TIMEN3 0x0008 +#define TIMEN4 0x0010 +#define TIMEN5 0x0020 +#define TIMEN6 0x0040 +#define TIMEN7 0x0080 +#define TIMEN8 0x0001 +#define TIMEN9 0x0002 +#define TIMEN10 0x0004 +#define TIMEN11 0x0008 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 +#define TIMEN3_P 0x03 +#define TIMEN4_P 0x04 +#define TIMEN5_P 0x05 +#define TIMEN6_P 0x06 +#define TIMEN7_P 0x07 +#define TIMEN8_P 0x00 +#define TIMEN9_P 0x01 +#define TIMEN10_P 0x02 +#define TIMEN11_P 0x03 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 +#define TIMDIS3 0x0008 +#define TIMDIS4 0x0010 +#define TIMDIS5 0x0020 +#define TIMDIS6 0x0040 +#define TIMDIS7 0x0080 +#define TIMDIS8 0x0001 +#define TIMDIS9 0x0002 +#define TIMDIS10 0x0004 +#define TIMDIS11 0x0008 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 +#define TIMDIS3_P 0x03 +#define TIMDIS4_P 0x04 +#define TIMDIS5_P 0x05 +#define TIMDIS6_P 0x06 +#define TIMDIS7_P 0x07 +#define TIMDIS8_P 0x00 +#define TIMDIS9_P 0x01 +#define TIMDIS10_P 0x02 +#define TIMDIS11_P 0x03 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x00000001 +#define TIMIL1 0x00000002 +#define TIMIL2 0x00000004 +#define TIMIL3 0x00000008 +#define TIMIL4 0x00010000 +#define TIMIL5 0x00020000 +#define TIMIL6 0x00040000 +#define TIMIL7 0x00080000 +#define TIMIL8 0x0001 +#define TIMIL9 0x0002 +#define TIMIL10 0x0004 +#define TIMIL11 0x0008 +#define TOVL_ERR0 0x00000010 +#define TOVL_ERR1 0x00000020 +#define TOVL_ERR2 0x00000040 +#define TOVL_ERR3 0x00000080 +#define TOVL_ERR4 0x00100000 +#define TOVL_ERR5 0x00200000 +#define TOVL_ERR6 0x00400000 +#define TOVL_ERR7 0x00800000 +#define TOVL_ERR8 0x0010 +#define TOVL_ERR9 0x0020 +#define TOVL_ERR10 0x0040 +#define TOVL_ERR11 0x0080 +#define TRUN0 0x00001000 +#define TRUN1 0x00002000 +#define TRUN2 0x00004000 +#define TRUN3 0x00008000 +#define TRUN4 0x10000000 +#define TRUN5 0x20000000 +#define TRUN6 0x40000000 +#define TRUN7 0x80000000 +#define TRUN8 0x1000 +#define TRUN9 0x2000 +#define TRUN10 0x4000 +#define TRUN11 0x8000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TIMIL3_P 0x03 +#define TIMIL4_P 0x10 +#define TIMIL5_P 0x11 +#define TIMIL6_P 0x12 +#define TIMIL7_P 0x13 +#define TIMIL8_P 0x00 +#define TIMIL9_P 0x01 +#define TIMIL10_P 0x02 +#define TIMIL11_P 0x03 +#define TOVL_ERR0_P 0x04 +#define TOVL_ERR1_P 0x05 +#define TOVL_ERR2_P 0x06 +#define TOVL_ERR3_P 0x07 +#define TOVL_ERR4_P 0x14 +#define TOVL_ERR5_P 0x15 +#define TOVL_ERR6_P 0x16 +#define TOVL_ERR7_P 0x17 +#define TOVL_ERR8_P 0x04 +#define TOVL_ERR9_P 0x05 +#define TOVL_ERR10_P 0x06 +#define TOVL_ERR11_P 0x07 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E +#define TRUN3_P 0x0F +#define TRUN4_P 0x1C +#define TRUN5_P 0x1D +#define TRUN6_P 0x1E +#define TRUN7_P 0x1F +#define TRUN8_P 0x0C +#define TRUN9_P 0x0D +#define TRUN10_P 0x0E +#define TRUN11_P 0x0F + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ +#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ + +/* AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ +#define B0_PEN 0x0010 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN 0x0020 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN 0x0040 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN 0x0080 /* Enable 16-bit packing Bank 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ +#define B0_PEN_P 0x004 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN_P 0x005 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN_P 0x006 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN_P 0x007 /* Enable 16-bit packing Bank 3 */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* ********************** SDRAM CONTROLLER MASKS *************************** */ + +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /*Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EB0_E 0x00000001 /* Enable SDRAM external bank 0 */ +#define EB0_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB0_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EB0_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EB0_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EB0_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB0_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +#define EB1_E 0x00000100 /* Enable SDRAM external bank 1 */ +#define EB1__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB1__SZ_32 0x00000200 /* SDRAM external bank size = 32MB */ +#define EB1__SZ_64 0x00000400 /* SDRAM external bank size = 64MB */ +#define EB1__SZ_128 0x00000600 /* SDRAM external bank size = 128MB */ +#define EB1__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB1__CAW_9 0x00001000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_10 0x00002000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_11 0x00003000 /* SDRAM external bank column address width = 9 bits */ + +#define EB2__E 0x00010000 /* Enable SDRAM external bank 2 */ +#define EB2__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB2__SZ_32 0x00020000 /* SDRAM external bank size = 32MB */ +#define EB2__SZ_64 0x00040000 /* SDRAM external bank size = 64MB */ +#define EB2__SZ_128 0x00060000 /* SDRAM external bank size = 128MB */ +#define EB2__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB2__CAW_9 0x00100000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_10 0x00200000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_11 0x00300000 /* SDRAM external bank column address width = 9 bits */ + +#define EB3__E 0x01000000 /* Enable SDRAM external bank 3 */ +#define EB3__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB3__SZ_32 0x02000000 /* SDRAM external bank size = 32MB */ +#define EB3__SZ_64 0x04000000 /* SDRAM external bank size = 64MB */ +#define EB3__SZ_128 0x06000000 /* SDRAM external bank size = 128MB */ +#define EB3__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB3__CAW_9 0x10000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_10 0x20000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_11 0x30000000 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + +/*VR_CTL Masks*/ +#define WAKE 0x100 +#define VLEV_6 0x60 +#define VLEV_7 0x70 +#define VLEV_8 0x80 +#define VLEV_9 0x90 +#define VLEV_10 0xA0 +#define VLEV_11 0xB0 +#define VLEV_12 0xC0 +#define VLEV_13 0xD0 +#define VLEV_14 0xE0 +#define VLEV_15 0xF0 +#define FREQ_3 0x03 + +#endif /* _DEF_BF561_H */ diff --git a/include/asm-blackfin/mach-bf561/dma.h b/include/asm-blackfin/mach-bf561/dma.h new file mode 100644 index 0000000000..21d982003e --- /dev/null +++ b/include/asm-blackfin/mach-bf561/dma.h @@ -0,0 +1,35 @@ +/***************************************************************************** +* +* BF-533/2/1 Specific Declarations +* +****************************************************************************/ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define MAX_BLACKFIN_DMA_CHANNEL 36 + +#define CH_PPI0 0 +#define CH_PPI (CH_PPI0) +#define CH_PPI1 1 +#define CH_SPORT0_RX 12 +#define CH_SPORT0_TX 13 +#define CH_SPORT1_RX 14 +#define CH_SPORT1_TX 15 +#define CH_SPI 16 +#define CH_UART_RX 17 +#define CH_UART_TX 18 +#define CH_MEM_STREAM0_DEST 24 /* TX */ +#define CH_MEM_STREAM0_SRC 25 /* RX */ +#define CH_MEM_STREAM1_DEST 26 /* TX */ +#define CH_MEM_STREAM1_SRC 27 /* RX */ +#define CH_MEM_STREAM2_DEST 28 +#define CH_MEM_STREAM2_SRC 29 +#define CH_MEM_STREAM3_SRC 30 +#define CH_MEM_STREAM3_DEST 31 +#define CH_IMEM_STREAM0_DEST 32 +#define CH_IMEM_STREAM0_SRC 33 +#define CH_IMEM_STREAM1_SRC 34 +#define CH_IMEM_STREAM1_DEST 35 + +#endif diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h new file mode 100644 index 0000000000..a753ce720d --- /dev/null +++ b/include/asm-blackfin/mach-bf561/irq.h @@ -0,0 +1,450 @@ + +/* + * File: include/asm-blackfin/mach-bf561/irq.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BF561_IRQ_H_ +#define _BF561_IRQ_H_ + +/*********************************************************************** + * Interrupt source definitions: + Event Source Core Event Name IRQ No + (highest priority) + Emulation Events EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + + PLL Wakeup Interrupt IVG7 7 + DMA1 Error (generic) IVG7 8 + DMA2 Error (generic) IVG7 9 + IMDMA Error (generic) IVG7 10 + PPI1 Error Interrupt IVG7 11 + PPI2 Error Interrupt IVG7 12 + SPORT0 Error Interrupt IVG7 13 + SPORT1 Error Interrupt IVG7 14 + SPI Error Interrupt IVG7 15 + UART Error Interrupt IVG7 16 + Reserved Interrupt IVG7 17 + + DMA1 0 Interrupt(PPI1) IVG8 18 + DMA1 1 Interrupt(PPI2) IVG8 19 + DMA1 2 Interrupt IVG8 20 + DMA1 3 Interrupt IVG8 21 + DMA1 4 Interrupt IVG8 22 + DMA1 5 Interrupt IVG8 23 + DMA1 6 Interrupt IVG8 24 + DMA1 7 Interrupt IVG8 25 + DMA1 8 Interrupt IVG8 26 + DMA1 9 Interrupt IVG8 27 + DMA1 10 Interrupt IVG8 28 + DMA1 11 Interrupt IVG8 29 + + DMA2 0 (SPORT0 RX) IVG9 30 + DMA2 1 (SPORT0 TX) IVG9 31 + DMA2 2 (SPORT1 RX) IVG9 32 + DMA2 3 (SPORT2 TX) IVG9 33 + DMA2 4 (SPI) IVG9 34 + DMA2 5 (UART RX) IVG9 35 + DMA2 6 (UART TX) IVG9 36 + DMA2 7 Interrupt IVG9 37 + DMA2 8 Interrupt IVG9 38 + DMA2 9 Interrupt IVG9 39 + DMA2 10 Interrupt IVG9 40 + DMA2 11 Interrupt IVG9 41 + + TIMER 0 Interrupt IVG10 42 + TIMER 1 Interrupt IVG10 43 + TIMER 2 Interrupt IVG10 44 + TIMER 3 Interrupt IVG10 45 + TIMER 4 Interrupt IVG10 46 + TIMER 5 Interrupt IVG10 47 + TIMER 6 Interrupt IVG10 48 + TIMER 7 Interrupt IVG10 49 + TIMER 8 Interrupt IVG10 50 + TIMER 9 Interrupt IVG10 51 + TIMER 10 Interrupt IVG10 52 + TIMER 11 Interrupt IVG10 53 + + Programmable Flags0 A (8) IVG11 54 + Programmable Flags0 B (8) IVG11 55 + Programmable Flags1 A (8) IVG11 56 + Programmable Flags1 B (8) IVG11 57 + Programmable Flags2 A (8) IVG11 58 + Programmable Flags2 B (8) IVG11 59 + + MDMA1 0 write/read INT IVG8 60 + MDMA1 1 write/read INT IVG8 61 + + MDMA2 0 write/read INT IVG9 62 + MDMA2 1 write/read INT IVG9 63 + + IMDMA 0 write/read INT IVG12 64 + IMDMA 1 write/read INT IVG12 65 + + Watch Dog Timer IVG13 66 + + Reserved interrupt IVG7 67 + Reserved interrupt IVG7 68 + Supplemental interrupt 0 IVG7 69 + supplemental interrupt 1 IVG7 70 + + Software Interrupt 1 IVG14 71 + Software Interrupt 2 IVG15 72 * + (lowest priority) + **********************************************************************/ + +#define SYS_IRQS 72 +#define NR_PERI_INTS 64 + +/* + * The ABSTRACT IRQ definitions + * the first seven of the following are fixed, + * the rest you change if you need to. + */ +/* IVG 0-6*/ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* Reset */ +#define IRQ_NMI 2 /* Non Maskable Interrupt */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* Reserved interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define IVG_BASE 7 +/* IVG 7 */ +#define IRQ_PLL_WAKEUP (IVG_BASE + 0) /* PLL Wakeup Interrupt */ +#define IRQ_DMA1_ERROR (IVG_BASE + 1) /* DMA1 Error (general) */ +#define IRQ_DMA_ERROR IRQ_DMA1_ERROR /* DMA1 Error (general) */ +#define IRQ_DMA2_ERROR (IVG_BASE + 2) /* DMA2 Error (general) */ +#define IRQ_IMDMA_ERROR (IVG_BASE + 3) /* IMDMA Error Interrupt */ +#define IRQ_PPI1_ERROR (IVG_BASE + 4) /* PPI1 Error Interrupt */ +#define IRQ_PPI_ERROR IRQ_PPI1_ERROR /* PPI1 Error Interrupt */ +#define IRQ_PPI2_ERROR (IVG_BASE + 5) /* PPI2 Error Interrupt */ +#define IRQ_SPORT0_ERROR (IVG_BASE + 6) /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR (IVG_BASE + 7) /* SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR (IVG_BASE + 8) /* SPI Error Interrupt */ +#define IRQ_UART_ERROR (IVG_BASE + 9) /* UART Error Interrupt */ +#define IRQ_RESERVED_ERROR (IVG_BASE + 10) /* Reversed Interrupt */ +/* IVG 8 */ +#define IRQ_DMA1_0 (IVG_BASE + 11) /* DMA1 0 Interrupt(PPI1) */ +#define IRQ_PPI IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */ +#define IRQ_PPI0 IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */ +#define IRQ_DMA1_1 (IVG_BASE + 12) /* DMA1 1 Interrupt(PPI2) */ +#define IRQ_PPI1 IRQ_DMA1_1 /* DMA1 1 Interrupt(PPI2) */ +#define IRQ_DMA1_2 (IVG_BASE + 13) /* DMA1 2 Interrupt */ +#define IRQ_DMA1_3 (IVG_BASE + 14) /* DMA1 3 Interrupt */ +#define IRQ_DMA1_4 (IVG_BASE + 15) /* DMA1 4 Interrupt */ +#define IRQ_DMA1_5 (IVG_BASE + 16) /* DMA1 5 Interrupt */ +#define IRQ_DMA1_6 (IVG_BASE + 17) /* DMA1 6 Interrupt */ +#define IRQ_DMA1_7 (IVG_BASE + 18) /* DMA1 7 Interrupt */ +#define IRQ_DMA1_8 (IVG_BASE + 19) /* DMA1 8 Interrupt */ +#define IRQ_DMA1_9 (IVG_BASE + 20) /* DMA1 9 Interrupt */ +#define IRQ_DMA1_10 (IVG_BASE + 21) /* DMA1 10 Interrupt */ +#define IRQ_DMA1_11 (IVG_BASE + 22) /* DMA1 11 Interrupt */ +/* IVG 9 */ +#define IRQ_DMA2_0 (IVG_BASE + 23) /* DMA2 0 (SPORT0 RX) */ +#define IRQ_SPORT0_RX IRQ_DMA2_0 /* DMA2 0 (SPORT0 RX) */ +#define IRQ_DMA2_1 (IVG_BASE + 24) /* DMA2 1 (SPORT0 TX) */ +#define IRQ_SPORT0_TX IRQ_DMA2_1 /* DMA2 1 (SPORT0 TX) */ +#define IRQ_DMA2_2 (IVG_BASE + 25) /* DMA2 2 (SPORT1 RX) */ +#define IRQ_SPORT1_RX IRQ_DMA2_2 /* DMA2 2 (SPORT1 RX) */ +#define IRQ_DMA2_3 (IVG_BASE + 26) /* DMA2 3 (SPORT2 TX) */ +#define IRQ_SPORT1_TX IRQ_DMA2_3 /* DMA2 3 (SPORT2 TX) */ +#define IRQ_DMA2_4 (IVG_BASE + 27) /* DMA2 4 (SPI) */ +#define IRQ_SPI IRQ_DMA2_4 /* DMA2 4 (SPI) */ +#define IRQ_DMA2_5 (IVG_BASE + 28) /* DMA2 5 (UART RX) */ +#define IRQ_UART_RX IRQ_DMA2_5 /* DMA2 5 (UART RX) */ +#define IRQ_DMA2_6 (IVG_BASE + 29) /* DMA2 6 (UART TX) */ +#define IRQ_UART_TX IRQ_DMA2_6 /* DMA2 6 (UART TX) */ +#define IRQ_DMA2_7 (IVG_BASE + 30) /* DMA2 7 Interrupt */ +#define IRQ_DMA2_8 (IVG_BASE + 31) /* DMA2 8 Interrupt */ +#define IRQ_DMA2_9 (IVG_BASE + 32) /* DMA2 9 Interrupt */ +#define IRQ_DMA2_10 (IVG_BASE + 33) /* DMA2 10 Interrupt */ +#define IRQ_DMA2_11 (IVG_BASE + 34) /* DMA2 11 Interrupt */ +/* IVG 10 */ +#define IRQ_TIMER0 (IVG_BASE + 35) /* TIMER 0 Interrupt */ +#define IRQ_TIMER1 (IVG_BASE + 36) /* TIMER 1 Interrupt */ +#define IRQ_TIMER2 (IVG_BASE + 37) /* TIMER 2 Interrupt */ +#define IRQ_TIMER3 (IVG_BASE + 38) /* TIMER 3 Interrupt */ +#define IRQ_TIMER4 (IVG_BASE + 39) /* TIMER 4 Interrupt */ +#define IRQ_TIMER5 (IVG_BASE + 40) /* TIMER 5 Interrupt */ +#define IRQ_TIMER6 (IVG_BASE + 41) /* TIMER 6 Interrupt */ +#define IRQ_TIMER7 (IVG_BASE + 42) /* TIMER 7 Interrupt */ +#define IRQ_TIMER8 (IVG_BASE + 43) /* TIMER 8 Interrupt */ +#define IRQ_TIMER9 (IVG_BASE + 44) /* TIMER 9 Interrupt */ +#define IRQ_TIMER10 (IVG_BASE + 45) /* TIMER 10 Interrupt */ +#define IRQ_TIMER11 (IVG_BASE + 46) /* TIMER 11 Interrupt */ +/* IVG 11 */ +#define IRQ_PROG0_INTA (IVG_BASE + 47) /* Programmable Flags0 A (8) */ +#define IRQ_PROG_INTA IRQ_PROG0_INTA /* Programmable Flags0 A (8) */ +#define IRQ_PROG0_INTB (IVG_BASE + 48) /* Programmable Flags0 B (8) */ +#define IRQ_PROG_INTB IRQ_PROG0_INTB /* Programmable Flags0 B (8) */ +#define IRQ_PROG1_INTA (IVG_BASE + 49) /* Programmable Flags1 A (8) */ +#define IRQ_PROG1_INTB (IVG_BASE + 50) /* Programmable Flags1 B (8) */ +#define IRQ_PROG2_INTA (IVG_BASE + 51) /* Programmable Flags2 A (8) */ +#define IRQ_PROG2_INTB (IVG_BASE + 52) /* Programmable Flags2 B (8) */ +/* IVG 8 */ +#define IRQ_DMA1_WRRD0 (IVG_BASE + 53) /* MDMA1 0 write/read INT */ +#define IRQ_DMA_WRRD0 IRQ_DMA1_WRRD0 /* MDMA1 0 write/read INT */ +#define IRQ_MEM_DMA0 IRQ_DMA1_WRRD0 +#define IRQ_DMA1_WRRD1 (IVG_BASE + 54) /* MDMA1 1 write/read INT */ +#define IRQ_DMA_WRRD1 IRQ_DMA1_WRRD1 /* MDMA1 1 write/read INT */ +#define IRQ_MEM_DMA1 IRQ_DMA1_WRRD1 +/* IVG 9 */ +#define IRQ_DMA2_WRRD0 (IVG_BASE + 55) /* MDMA2 0 write/read INT */ +#define IRQ_MEM_DMA2 IRQ_DMA2_WRRD0 +#define IRQ_DMA2_WRRD1 (IVG_BASE + 56) /* MDMA2 1 write/read INT */ +#define IRQ_MEM_DMA3 IRQ_DMA2_WRRD1 +/* IVG 12 */ +#define IRQ_IMDMA_WRRD0 (IVG_BASE + 57) /* IMDMA 0 write/read INT */ +#define IRQ_IMEM_DMA0 IRQ_IMDMA_WRRD0 +#define IRQ_IMDMA_WRRD1 (IVG_BASE + 58) /* IMDMA 1 write/read INT */ +#define IRQ_IMEM_DMA1 IRQ_IMDMA_WRRD1 +/* IVG 13 */ +#define IRQ_WATCH (IVG_BASE + 59) /* Watch Dog Timer */ +/* IVG 7 */ +#define IRQ_RESERVED_1 (IVG_BASE + 60) /* Reserved interrupt */ +#define IRQ_RESERVED_2 (IVG_BASE + 61) /* Reserved interrupt */ +#define IRQ_SUPPLE_0 (IVG_BASE + 62) /* Supplemental interrupt 0 */ +#define IRQ_SUPPLE_1 (IVG_BASE + 63) /* supplemental interrupt 1 */ +#define IRQ_SW_INT1 71 /* Software Interrupt 1 */ +#define IRQ_SW_INT2 72 /* Software Interrupt 2 */ + /* reserved for SYSCALL */ +#define IRQ_PF0 73 +#define IRQ_PF1 74 +#define IRQ_PF2 75 +#define IRQ_PF3 76 +#define IRQ_PF4 77 +#define IRQ_PF5 78 +#define IRQ_PF6 79 +#define IRQ_PF7 80 +#define IRQ_PF8 81 +#define IRQ_PF9 82 +#define IRQ_PF10 83 +#define IRQ_PF11 84 +#define IRQ_PF12 85 +#define IRQ_PF13 86 +#define IRQ_PF14 87 +#define IRQ_PF15 88 +#define IRQ_PF16 89 +#define IRQ_PF17 90 +#define IRQ_PF18 91 +#define IRQ_PF19 92 +#define IRQ_PF20 93 +#define IRQ_PF21 94 +#define IRQ_PF22 95 +#define IRQ_PF23 96 +#define IRQ_PF24 97 +#define IRQ_PF25 98 +#define IRQ_PF26 99 +#define IRQ_PF27 100 +#define IRQ_PF28 101 +#define IRQ_PF29 102 +#define IRQ_PF30 103 +#define IRQ_PF31 104 +#define IRQ_PF32 105 +#define IRQ_PF33 106 +#define IRQ_PF34 107 +#define IRQ_PF35 108 +#define IRQ_PF36 109 +#define IRQ_PF37 110 +#define IRQ_PF38 111 +#define IRQ_PF39 112 +#define IRQ_PF40 113 +#define IRQ_PF41 114 +#define IRQ_PF42 115 +#define IRQ_PF43 116 +#define IRQ_PF44 117 +#define IRQ_PF45 118 +#define IRQ_PF46 119 +#define IRQ_PF47 120 + +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO +#define NR_IRQS (IRQ_PF47 + 1) +#else +#define NR_IRQS SYS_IRQS +#endif + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* + * DEFAULT PRIORITIES: + */ + +#define CONFIG_DEF_PLL_WAKEUP 7 +#define CONFIG_DEF_DMA1_ERROR 7 +#define CONFIG_DEF_DMA2_ERROR 7 +#define CONFIG_DEF_IMDMA_ERROR 7 +#define CONFIG_DEF_PPI1_ERROR 7 +#define CONFIG_DEF_PPI2_ERROR 7 +#define CONFIG_DEF_SPORT0_ERROR 7 +#define CONFIG_DEF_SPORT1_ERROR 7 +#define CONFIG_DEF_SPI_ERROR 7 +#define CONFIG_DEF_UART_ERROR 7 +#define CONFIG_DEF_RESERVED_ERROR 7 +#define CONFIG_DEF_DMA1_0 8 +#define CONFIG_DEF_DMA1_1 8 +#define CONFIG_DEF_DMA1_2 8 +#define CONFIG_DEF_DMA1_3 8 +#define CONFIG_DEF_DMA1_4 8 +#define CONFIG_DEF_DMA1_5 8 +#define CONFIG_DEF_DMA1_6 8 +#define CONFIG_DEF_DMA1_7 8 +#define CONFIG_DEF_DMA1_8 8 +#define CONFIG_DEF_DMA1_9 8 +#define CONFIG_DEF_DMA1_10 8 +#define CONFIG_DEF_DMA1_11 8 +#define CONFIG_DEF_DMA2_0 9 +#define CONFIG_DEF_DMA2_1 9 +#define CONFIG_DEF_DMA2_2 9 +#define CONFIG_DEF_DMA2_3 9 +#define CONFIG_DEF_DMA2_4 9 +#define CONFIG_DEF_DMA2_5 9 +#define CONFIG_DEF_DMA2_6 9 +#define CONFIG_DEF_DMA2_7 9 +#define CONFIG_DEF_DMA2_8 9 +#define CONFIG_DEF_DMA2_9 9 +#define CONFIG_DEF_DMA2_10 9 +#define CONFIG_DEF_DMA2_11 9 +#define CONFIG_DEF_TIMER0 10 +#define CONFIG_DEF_TIMER1 10 +#define CONFIG_DEF_TIMER2 10 +#define CONFIG_DEF_TIMER3 10 +#define CONFIG_DEF_TIMER4 10 +#define CONFIG_DEF_TIMER5 10 +#define CONFIG_DEF_TIMER6 10 +#define CONFIG_DEF_TIMER7 10 +#define CONFIG_DEF_TIMER8 10 +#define CONFIG_DEF_TIMER9 10 +#define CONFIG_DEF_TIMER10 10 +#define CONFIG_DEF_TIMER11 10 +#define CONFIG_DEF_PROG0_INTA 11 +#define CONFIG_DEF_PROG0_INTB 11 +#define CONFIG_DEF_PROG1_INTA 11 +#define CONFIG_DEF_PROG1_INTB 11 +#define CONFIG_DEF_PROG2_INTA 11 +#define CONFIG_DEF_PROG2_INTB 11 +#define CONFIG_DEF_DMA1_WRRD0 8 +#define CONFIG_DEF_DMA1_WRRD1 8 +#define CONFIG_DEF_DMA2_WRRD0 9 +#define CONFIG_DEF_DMA2_WRRD1 9 +#define CONFIG_DEF_IMDMA_WRRD0 12 +#define CONFIG_DEF_IMDMA_WRRD1 12 +#define CONFIG_DEF_WATCH 13 +#define CONFIG_DEF_RESERVED_1 7 +#define CONFIG_DEF_RESERVED_2 7 +#define CONFIG_DEF_SUPPLE_0 7 +#define CONFIG_DEF_SUPPLE_1 7 + +/* IAR0 BIT FIELDS */ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA1_ERROR_POS 4 +#define IRQ_DMA2_ERROR_POS 8 +#define IRQ_IMDMA_ERROR_POS 12 +#define IRQ_PPI0_ERROR_POS 16 +#define IRQ_PPI1_ERROR_POS 20 +#define IRQ_SPORT0_ERROR_POS 24 +#define IRQ_SPORT1_ERROR_POS 28 +/* IAR1 BIT FIELDS */ +#define IRQ_SPI_ERROR_POS 0 +#define IRQ_UART_ERROR_POS 4 +#define IRQ_RESERVED_ERROR_POS 8 +#define IRQ_DMA1_0_POS 12 +#define IRQ_DMA1_1_POS 16 +#define IRQ_DMA1_2_POS 20 +#define IRQ_DMA1_3_POS 24 +#define IRQ_DMA1_4_POS 28 +/* IAR2 BIT FIELDS */ +#define IRQ_DMA1_5_POS 0 +#define IRQ_DMA1_6_POS 4 +#define IRQ_DMA1_7_POS 8 +#define IRQ_DMA1_8_POS 12 +#define IRQ_DMA1_9_POS 16 +#define IRQ_DMA1_10_POS 20 +#define IRQ_DMA1_11_POS 24 +#define IRQ_DMA2_0_POS 28 +/* IAR3 BIT FIELDS */ +#define IRQ_DMA2_1_POS 0 +#define IRQ_DMA2_2_POS 4 +#define IRQ_DMA2_3_POS 8 +#define IRQ_DMA2_4_POS 12 +#define IRQ_DMA2_5_POS 16 +#define IRQ_DMA2_6_POS 20 +#define IRQ_DMA2_7_POS 24 +#define IRQ_DMA2_8_POS 28 +/* IAR4 BIT FIELDS */ +#define IRQ_DMA2_9_POS 0 +#define IRQ_DMA2_10_POS 4 +#define IRQ_DMA2_11_POS 8 +#define IRQ_TIMER0_POS 12 +#define IRQ_TIMER1_POS 16 +#define IRQ_TIMER2_POS 20 +#define IRQ_TIMER3_POS 24 +#define IRQ_TIMER4_POS 28 +/* IAR5 BIT FIELDS */ +#define IRQ_TIMER5_POS 0 +#define IRQ_TIMER6_POS 4 +#define IRQ_TIMER7_POS 8 +#define IRQ_TIMER8_POS 12 +#define IRQ_TIMER9_POS 16 +#define IRQ_TIMER10_POS 20 +#define IRQ_TIMER11_POS 24 +#define IRQ_PROG0_INTA_POS 28 +/* IAR6 BIT FIELDS */ +#define IRQ_PROG0_INTB_POS 0 +#define IRQ_PROG1_INTA_POS 4 +#define IRQ_PROG1_INTB_POS 8 +#define IRQ_PROG2_INTA_POS 12 +#define IRQ_PROG2_INTB_POS 16 +#define IRQ_DMA1_WRRD0_POS 20 +#define IRQ_DMA1_WRRD1_POS 24 +#define IRQ_DMA2_WRRD0_POS 28 +/* IAR7 BIT FIELDS */ +#define IRQ_DMA2_WRRD1_POS 0 +#define IRQ_IMDMA_WRRD0_POS 4 +#define IRQ_IMDMA_WRRD1_POS 8 +#define IRQ_WDTIMER_POS 12 +#define IRQ_RESERVED_1_POS 16 +#define IRQ_RESERVED_2_POS 20 +#define IRQ_SUPPLE_0_POS 24 +#define IRQ_SUPPLE_1_POS 28 + +#endif /* _BF561_IRQ_H_ */ diff --git a/include/asm-blackfin/mach-bf561/mem_init.h b/include/asm-blackfin/mach-bf561/mem_init.h new file mode 100644 index 0000000000..439a5895b3 --- /dev/null +++ b/include/asm-blackfin/mach-bf561/mem_init.h @@ -0,0 +1,322 @@ +/* + * File: include/asm-blackfin/mach-bf561/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC8M32B2B5_7) +#if (CONFIG_SCLK_HZ > 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_7 +#define SDRAM_tRAS_num 7 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_6 +#define SDRAM_tRAS_num 6 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_5 +#define SDRAM_tRAS_num 5 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 4 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) +#define SDRAM_tRP TRP_2 +#define SDRAM_tRP_num 2 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_2 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_4 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_3 +#define SDRAM_tRAS_num 3 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_2 +#define SDRAM_tRAS_num 2 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#if (CONFIG_SCLK_HZ <= 29850746) +#define SDRAM_tRP TRP_1 +#define SDRAM_tRP_num 1 +#define SDRAM_tRAS TRAS_1 +#define SDRAM_tRAS_num 1 +#define SDRAM_tRCD TRCD_1 +#define SDRAM_tWR TWR_2 +#endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC8M32B2B5_7) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) + /*SDRAM INFORMATION: Modify this for your board */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_SIZE == 128) +#define SDRAM_SIZE EB0_SZ_128 +#endif +#if (CONFIG_MEM_SIZE == 64) +#define SDRAM_SIZE EB0_SZ_64 +#endif +#if ( CONFIG_MEM_SIZE == 32) +#define SDRAM_SIZE EB0_SZ_32 +#endif +#if (CONFIG_MEM_SIZE == 16) +#define SDRAM_SIZE EB0_SZ_16 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 11) +#define SDRAM_WIDTH EB0_CAW_11 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 10) +#define SDRAM_WIDTH EB0_CAW_10 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 9) +#define SDRAM_WIDTH EB0_CAW_9 +#endif +#if (CONFIG_MEM_ADD_WIDTH == 8) +#define SDRAM_WIDTH EB0_CAW_8 +#endif + +#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EB0_E) + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/include/asm-blackfin/mach-bf561/mem_map.h new file mode 100644 index 0000000000..ebac9a8d83 --- /dev/null +++ b/include/asm-blackfin/mach-bf561/mem_map.h @@ -0,0 +1,75 @@ +/* + * Memory MAP + * Common header file for blackfin BF561 of processors. + */ + +#ifndef _MEM_MAP_561_H_ +#define _MEM_MAP_561_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK2_BASE 0x28000000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK1_BASE 0x24000000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x04000000 /* 64M */ + +/* Level 1 Memory */ + +#ifdef CONFIG_BLKFIN_CACHE +#define BLKFIN_ICACHESIZE (16*1024) +#else +#define BLKFIN_ICACHESIZE (0*1024) +#endif + +/* Memory Map for ADSP-BF561 processors */ + +#ifdef CONFIG_BF561 +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0x4000 + +#ifdef CONFIG_BLKFIN_DCACHE + +#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (16*1024) +#define BLKFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BLKFIN_DCACHESIZE (32*1024) +#define BLKFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (0*1024) +#define BLKFIN_DSUPBANKS 0 +#endif /*CONFIG_BLKFIN_DCACHE*/ +#endif + +/* Level 2 Memory */ +#define L2_START 0xFEB00000 +#define L2_LENGTH 0x20000 + +/* Scratch Pad Memory */ + +#if defined(CONFIG_BF561) +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 +#endif + +#endif /* _MEM_MAP_533_H_ */ diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h new file mode 100644 index 0000000000..22aa5e6379 --- /dev/null +++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h @@ -0,0 +1,471 @@ + /* + * File: include/asm-blackfin/mach-common/cdef_LPBlackfin.h + * Based on: + * Author: unknown + * COPYRIGHT 2005 Analog Devices + * Created: ? + * Description: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_LPBLACKFIN_H +#define _CDEF_LPBLACKFIN_H + +/*#if !defined(__ADSPLPBLACKFIN__) +#warning cdef_LPBlackfin.h should only be included for 532 compatible chips. +#endif +*/ +#include + +/*Cache & SRAM Memory*/ +#define pSRAM_BASE_ADDRESS ((volatile void **)SRAM_BASE_ADDRESS) +#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS) +#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val) +#define pDMEM_CONTROL ((volatile unsigned long *)DMEM_CONTROL) +#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL) +#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val) +#define pDCPLB_STATUS ((volatile unsigned long *)DCPLB_STATUS) +#define bfin_read_DCPLB_STATUS() bfin_read32(DCPLB_STATUS) +#define bfin_write_DCPLB_STATUS(val) bfin_write32(DCPLB_STATUS,val) +#define pDCPLB_FAULT_ADDR ((volatile void **)DCPLB_FAULT_ADDR) +#define bfin_read_DCPLB_FAULT_ADDR() bfin_read32(DCPLB_FAULT_ADDR) +#define bfin_write_DCPLB_FAULT_ADDR(val) bfin_write32(DCPLB_FAULT_ADDR,val) +/* +#define MMR_TIMEOUT 0xFFE00010 +*/ +#define pDCPLB_ADDR0 ((volatile void **)DCPLB_ADDR0) +#define bfin_read_DCPLB_ADDR0() bfin_read32(DCPLB_ADDR0) +#define bfin_write_DCPLB_ADDR0(val) bfin_write32(DCPLB_ADDR0,val) +#define pDCPLB_ADDR1 ((volatile void **)DCPLB_ADDR1) +#define bfin_read_DCPLB_ADDR1() bfin_read32(DCPLB_ADDR1) +#define bfin_write_DCPLB_ADDR1(val) bfin_write32(DCPLB_ADDR1,val) +#define pDCPLB_ADDR2 ((volatile void **)DCPLB_ADDR2) +#define bfin_read_DCPLB_ADDR2() bfin_read32(DCPLB_ADDR2) +#define bfin_write_DCPLB_ADDR2(val) bfin_write32(DCPLB_ADDR2,val) +#define pDCPLB_ADDR3 ((volatile void **)DCPLB_ADDR3) +#define bfin_read_DCPLB_ADDR3() bfin_read32(DCPLB_ADDR3) +#define bfin_write_DCPLB_ADDR3(val) bfin_write32(DCPLB_ADDR3,val) +#define pDCPLB_ADDR4 ((volatile void **)DCPLB_ADDR4) +#define bfin_read_DCPLB_ADDR4() bfin_read32(DCPLB_ADDR4) +#define bfin_write_DCPLB_ADDR4(val) bfin_write32(DCPLB_ADDR4,val) +#define pDCPLB_ADDR5 ((volatile void **)DCPLB_ADDR5) +#define bfin_read_DCPLB_ADDR5() bfin_read32(DCPLB_ADDR5) +#define bfin_write_DCPLB_ADDR5(val) bfin_write32(DCPLB_ADDR5,val) +#define pDCPLB_ADDR6 ((volatile void **)DCPLB_ADDR6) +#define bfin_read_DCPLB_ADDR6() bfin_read32(DCPLB_ADDR6) +#define bfin_write_DCPLB_ADDR6(val) bfin_write32(DCPLB_ADDR6,val) +#define pDCPLB_ADDR7 ((volatile void **)DCPLB_ADDR7) +#define bfin_read_DCPLB_ADDR7() bfin_read32(DCPLB_ADDR7) +#define bfin_write_DCPLB_ADDR7(val) bfin_write32(DCPLB_ADDR7,val) +#define pDCPLB_ADDR8 ((volatile void **)DCPLB_ADDR8) +#define bfin_read_DCPLB_ADDR8() bfin_read32(DCPLB_ADDR8) +#define bfin_write_DCPLB_ADDR8(val) bfin_write32(DCPLB_ADDR8,val) +#define pDCPLB_ADDR9 ((volatile void **)DCPLB_ADDR9) +#define bfin_read_DCPLB_ADDR9() bfin_read32(DCPLB_ADDR9) +#define bfin_write_DCPLB_ADDR9(val) bfin_write32(DCPLB_ADDR9,val) +#define pDCPLB_ADDR10 ((volatile void **)DCPLB_ADDR10) +#define bfin_read_DCPLB_ADDR10() bfin_read32(DCPLB_ADDR10) +#define bfin_write_DCPLB_ADDR10(val) bfin_write32(DCPLB_ADDR10,val) +#define pDCPLB_ADDR11 ((volatile void **)DCPLB_ADDR11) +#define bfin_read_DCPLB_ADDR11() bfin_read32(DCPLB_ADDR11) +#define bfin_write_DCPLB_ADDR11(val) bfin_write32(DCPLB_ADDR11,val) +#define pDCPLB_ADDR12 ((volatile void **)DCPLB_ADDR12) +#define bfin_read_DCPLB_ADDR12() bfin_read32(DCPLB_ADDR12) +#define bfin_write_DCPLB_ADDR12(val) bfin_write32(DCPLB_ADDR12,val) +#define pDCPLB_ADDR13 ((volatile void **)DCPLB_ADDR13) +#define bfin_read_DCPLB_ADDR13() bfin_read32(DCPLB_ADDR13) +#define bfin_write_DCPLB_ADDR13(val) bfin_write32(DCPLB_ADDR13,val) +#define pDCPLB_ADDR14 ((volatile void **)DCPLB_ADDR14) +#define bfin_read_DCPLB_ADDR14() bfin_read32(DCPLB_ADDR14) +#define bfin_write_DCPLB_ADDR14(val) bfin_write32(DCPLB_ADDR14,val) +#define pDCPLB_ADDR15 ((volatile void **)DCPLB_ADDR15) +#define bfin_read_DCPLB_ADDR15() bfin_read32(DCPLB_ADDR15) +#define bfin_write_DCPLB_ADDR15(val) bfin_write32(DCPLB_ADDR15,val) +#define pDCPLB_DATA0 ((volatile unsigned long *)DCPLB_DATA0) +#define bfin_read_DCPLB_DATA0() bfin_read32(DCPLB_DATA0) +#define bfin_write_DCPLB_DATA0(val) bfin_write32(DCPLB_DATA0,val) +#define pDCPLB_DATA1 ((volatile unsigned long *)DCPLB_DATA1) +#define bfin_read_DCPLB_DATA1() bfin_read32(DCPLB_DATA1) +#define bfin_write_DCPLB_DATA1(val) bfin_write32(DCPLB_DATA1,val) +#define pDCPLB_DATA2 ((volatile unsigned long *)DCPLB_DATA2) +#define bfin_read_DCPLB_DATA2() bfin_read32(DCPLB_DATA2) +#define bfin_write_DCPLB_DATA2(val) bfin_write32(DCPLB_DATA2,val) +#define pDCPLB_DATA3 ((volatile unsigned long *)DCPLB_DATA3) +#define bfin_read_DCPLB_DATA3() bfin_read32(DCPLB_DATA3) +#define bfin_write_DCPLB_DATA3(val) bfin_write32(DCPLB_DATA3,val) +#define pDCPLB_DATA4 ((volatile unsigned long *)DCPLB_DATA4) +#define bfin_read_DCPLB_DATA4() bfin_read32(DCPLB_DATA4) +#define bfin_write_DCPLB_DATA4(val) bfin_write32(DCPLB_DATA4,val) +#define pDCPLB_DATA5 ((volatile unsigned long *)DCPLB_DATA5) +#define bfin_read_DCPLB_DATA5() bfin_read32(DCPLB_DATA5) +#define bfin_write_DCPLB_DATA5(val) bfin_write32(DCPLB_DATA5,val) +#define pDCPLB_DATA6 ((volatile unsigned long *)DCPLB_DATA6) +#define bfin_read_DCPLB_DATA6() bfin_read32(DCPLB_DATA6) +#define bfin_write_DCPLB_DATA6(val) bfin_write32(DCPLB_DATA6,val) +#define pDCPLB_DATA7 ((volatile unsigned long *)DCPLB_DATA7) +#define bfin_read_DCPLB_DATA7() bfin_read32(DCPLB_DATA7) +#define bfin_write_DCPLB_DATA7(val) bfin_write32(DCPLB_DATA7,val) +#define pDCPLB_DATA8 ((volatile unsigned long *)DCPLB_DATA8) +#define bfin_read_DCPLB_DATA8() bfin_read32(DCPLB_DATA8) +#define bfin_write_DCPLB_DATA8(val) bfin_write32(DCPLB_DATA8,val) +#define pDCPLB_DATA9 ((volatile unsigned long *)DCPLB_DATA9) +#define bfin_read_DCPLB_DATA9() bfin_read32(DCPLB_DATA9) +#define bfin_write_DCPLB_DATA9(val) bfin_write32(DCPLB_DATA9,val) +#define pDCPLB_DATA10 ((volatile unsigned long *)DCPLB_DATA10) +#define bfin_read_DCPLB_DATA10() bfin_read32(DCPLB_DATA10) +#define bfin_write_DCPLB_DATA10(val) bfin_write32(DCPLB_DATA10,val) +#define pDCPLB_DATA11 ((volatile unsigned long *)DCPLB_DATA11) +#define bfin_read_DCPLB_DATA11() bfin_read32(DCPLB_DATA11) +#define bfin_write_DCPLB_DATA11(val) bfin_write32(DCPLB_DATA11,val) +#define pDCPLB_DATA12 ((volatile unsigned long *)DCPLB_DATA12) +#define bfin_read_DCPLB_DATA12() bfin_read32(DCPLB_DATA12) +#define bfin_write_DCPLB_DATA12(val) bfin_write32(DCPLB_DATA12,val) +#define pDCPLB_DATA13 ((volatile unsigned long *)DCPLB_DATA13) +#define bfin_read_DCPLB_DATA13() bfin_read32(DCPLB_DATA13) +#define bfin_write_DCPLB_DATA13(val) bfin_write32(DCPLB_DATA13,val) +#define pDCPLB_DATA14 ((volatile unsigned long *)DCPLB_DATA14) +#define bfin_read_DCPLB_DATA14() bfin_read32(DCPLB_DATA14) +#define bfin_write_DCPLB_DATA14(val) bfin_write32(DCPLB_DATA14,val) +#define pDCPLB_DATA15 ((volatile unsigned long *)DCPLB_DATA15) +#define bfin_read_DCPLB_DATA15() bfin_read32(DCPLB_DATA15) +#define bfin_write_DCPLB_DATA15(val) bfin_write32(DCPLB_DATA15,val) +#define pDTEST_COMMAND ((volatile unsigned long *)DTEST_COMMAND) +#define bfin_read_DTEST_COMMAND() bfin_read32(DTEST_COMMAND) +#define bfin_write_DTEST_COMMAND(val) bfin_write32(DTEST_COMMAND,val) +/* +#define DTEST_INDEX 0xFFE00304 +*/ +#define pDTEST_DATA0 ((volatile unsigned long *)DTEST_DATA0) +#define bfin_read_DTEST_DATA0() bfin_read32(DTEST_DATA0) +#define bfin_write_DTEST_DATA0(val) bfin_write32(DTEST_DATA0,val) +#define pDTEST_DATA1 ((volatile unsigned long *)DTEST_DATA1) +#define bfin_read_DTEST_DATA1() bfin_read32(DTEST_DATA1) +#define bfin_write_DTEST_DATA1(val) bfin_write32(DTEST_DATA1,val) +/* +#define DTEST_DATA2 0xFFE00408 +#define DTEST_DATA3 0xFFE0040C +*/ +#define pIMEM_CONTROL ((volatile unsigned long *)IMEM_CONTROL) +#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL) +#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val) +#define pICPLB_STATUS ((volatile unsigned long *)ICPLB_STATUS) +#define bfin_read_ICPLB_STATUS() bfin_read32(ICPLB_STATUS) +#define bfin_write_ICPLB_STATUS(val) bfin_write32(ICPLB_STATUS,val) +#define pICPLB_FAULT_ADDR ((volatile void **)ICPLB_FAULT_ADDR) +#define bfin_read_ICPLB_FAULT_ADDR() bfin_read32(ICPLB_FAULT_ADDR) +#define bfin_write_ICPLB_FAULT_ADDR(val) bfin_write32(ICPLB_FAULT_ADDR,val) +#define pICPLB_ADDR0 ((volatile void **)ICPLB_ADDR0) +#define bfin_read_ICPLB_ADDR0() bfin_read32(ICPLB_ADDR0) +#define bfin_write_ICPLB_ADDR0(val) bfin_write32(ICPLB_ADDR0,val) +#define pICPLB_ADDR1 ((volatile void **)ICPLB_ADDR1) +#define bfin_read_ICPLB_ADDR1() bfin_read32(ICPLB_ADDR1) +#define bfin_write_ICPLB_ADDR1(val) bfin_write32(ICPLB_ADDR1,val) +#define pICPLB_ADDR2 ((volatile void **)ICPLB_ADDR2) +#define bfin_read_ICPLB_ADDR2() bfin_read32(ICPLB_ADDR2) +#define bfin_write_ICPLB_ADDR2(val) bfin_write32(ICPLB_ADDR2,val) +#define pICPLB_ADDR3 ((volatile void **)ICPLB_ADDR3) +#define bfin_read_ICPLB_ADDR3() bfin_read32(ICPLB_ADDR3) +#define bfin_write_ICPLB_ADDR3(val) bfin_write32(ICPLB_ADDR3,val) +#define pICPLB_ADDR4 ((volatile void **)ICPLB_ADDR4) +#define bfin_read_ICPLB_ADDR4() bfin_read32(ICPLB_ADDR4) +#define bfin_write_ICPLB_ADDR4(val) bfin_write32(ICPLB_ADDR4,val) +#define pICPLB_ADDR5 ((volatile void **)ICPLB_ADDR5) +#define bfin_read_ICPLB_ADDR5() bfin_read32(ICPLB_ADDR5) +#define bfin_write_ICPLB_ADDR5(val) bfin_write32(ICPLB_ADDR5,val) +#define pICPLB_ADDR6 ((volatile void **)ICPLB_ADDR6) +#define bfin_read_ICPLB_ADDR6() bfin_read32(ICPLB_ADDR6) +#define bfin_write_ICPLB_ADDR6(val) bfin_write32(ICPLB_ADDR6,val) +#define pICPLB_ADDR7 ((volatile void **)ICPLB_ADDR7) +#define bfin_read_ICPLB_ADDR7() bfin_read32(ICPLB_ADDR7) +#define bfin_write_ICPLB_ADDR7(val) bfin_write32(ICPLB_ADDR7,val) +#define pICPLB_ADDR8 ((volatile void **)ICPLB_ADDR8) +#define bfin_read_ICPLB_ADDR8() bfin_read32(ICPLB_ADDR8) +#define bfin_write_ICPLB_ADDR8(val) bfin_write32(ICPLB_ADDR8,val) +#define pICPLB_ADDR9 ((volatile void **)ICPLB_ADDR9) +#define bfin_read_ICPLB_ADDR9() bfin_read32(ICPLB_ADDR9) +#define bfin_write_ICPLB_ADDR9(val) bfin_write32(ICPLB_ADDR9,val) +#define pICPLB_ADDR10 ((volatile void **)ICPLB_ADDR10) +#define bfin_read_ICPLB_ADDR10() bfin_read32(ICPLB_ADDR10) +#define bfin_write_ICPLB_ADDR10(val) bfin_write32(ICPLB_ADDR10,val) +#define pICPLB_ADDR11 ((volatile void **)ICPLB_ADDR11) +#define bfin_read_ICPLB_ADDR11() bfin_read32(ICPLB_ADDR11) +#define bfin_write_ICPLB_ADDR11(val) bfin_write32(ICPLB_ADDR11,val) +#define pICPLB_ADDR12 ((volatile void **)ICPLB_ADDR12) +#define bfin_read_ICPLB_ADDR12() bfin_read32(ICPLB_ADDR12) +#define bfin_write_ICPLB_ADDR12(val) bfin_write32(ICPLB_ADDR12,val) +#define pICPLB_ADDR13 ((volatile void **)ICPLB_ADDR13) +#define bfin_read_ICPLB_ADDR13() bfin_read32(ICPLB_ADDR13) +#define bfin_write_ICPLB_ADDR13(val) bfin_write32(ICPLB_ADDR13,val) +#define pICPLB_ADDR14 ((volatile void **)ICPLB_ADDR14) +#define bfin_read_ICPLB_ADDR14() bfin_read32(ICPLB_ADDR14) +#define bfin_write_ICPLB_ADDR14(val) bfin_write32(ICPLB_ADDR14,val) +#define pICPLB_ADDR15 ((volatile void **)ICPLB_ADDR15) +#define bfin_read_ICPLB_ADDR15() bfin_read32(ICPLB_ADDR15) +#define bfin_write_ICPLB_ADDR15(val) bfin_write32(ICPLB_ADDR15,val) +#define pICPLB_DATA0 ((volatile unsigned long *)ICPLB_DATA0) +#define bfin_read_ICPLB_DATA0() bfin_read32(ICPLB_DATA0) +#define bfin_write_ICPLB_DATA0(val) bfin_write32(ICPLB_DATA0,val) +#define pICPLB_DATA1 ((volatile unsigned long *)ICPLB_DATA1) +#define bfin_read_ICPLB_DATA1() bfin_read32(ICPLB_DATA1) +#define bfin_write_ICPLB_DATA1(val) bfin_write32(ICPLB_DATA1,val) +#define pICPLB_DATA2 ((volatile unsigned long *)ICPLB_DATA2) +#define bfin_read_ICPLB_DATA2() bfin_read32(ICPLB_DATA2) +#define bfin_write_ICPLB_DATA2(val) bfin_write32(ICPLB_DATA2,val) +#define pICPLB_DATA3 ((volatile unsigned long *)ICPLB_DATA3) +#define bfin_read_ICPLB_DATA3() bfin_read32(ICPLB_DATA3) +#define bfin_write_ICPLB_DATA3(val) bfin_write32(ICPLB_DATA3,val) +#define pICPLB_DATA4 ((volatile unsigned long *)ICPLB_DATA4) +#define bfin_read_ICPLB_DATA4() bfin_read32(ICPLB_DATA4) +#define bfin_write_ICPLB_DATA4(val) bfin_write32(ICPLB_DATA4,val) +#define pICPLB_DATA5 ((volatile unsigned long *)ICPLB_DATA5) +#define bfin_read_ICPLB_DATA5() bfin_read32(ICPLB_DATA5) +#define bfin_write_ICPLB_DATA5(val) bfin_write32(ICPLB_DATA5,val) +#define pICPLB_DATA6 ((volatile unsigned long *)ICPLB_DATA6) +#define bfin_read_ICPLB_DATA6() bfin_read32(ICPLB_DATA6) +#define bfin_write_ICPLB_DATA6(val) bfin_write32(ICPLB_DATA6,val) +#define pICPLB_DATA7 ((volatile unsigned long *)ICPLB_DATA7) +#define bfin_read_ICPLB_DATA7() bfin_read32(ICPLB_DATA7) +#define bfin_write_ICPLB_DATA7(val) bfin_write32(ICPLB_DATA7,val) +#define pICPLB_DATA8 ((volatile unsigned long *)ICPLB_DATA8) +#define bfin_read_ICPLB_DATA8() bfin_read32(ICPLB_DATA8) +#define bfin_write_ICPLB_DATA8(val) bfin_write32(ICPLB_DATA8,val) +#define pICPLB_DATA9 ((volatile unsigned long *)ICPLB_DATA9) +#define bfin_read_ICPLB_DATA9() bfin_read32(ICPLB_DATA9) +#define bfin_write_ICPLB_DATA9(val) bfin_write32(ICPLB_DATA9,val) +#define pICPLB_DATA10 ((volatile unsigned long *)ICPLB_DATA10) +#define bfin_read_ICPLB_DATA10() bfin_read32(ICPLB_DATA10) +#define bfin_write_ICPLB_DATA10(val) bfin_write32(ICPLB_DATA10,val) +#define pICPLB_DATA11 ((volatile unsigned long *)ICPLB_DATA11) +#define bfin_read_ICPLB_DATA11() bfin_read32(ICPLB_DATA11) +#define bfin_write_ICPLB_DATA11(val) bfin_write32(ICPLB_DATA11,val) +#define pICPLB_DATA12 ((volatile unsigned long *)ICPLB_DATA12) +#define bfin_read_ICPLB_DATA12() bfin_read32(ICPLB_DATA12) +#define bfin_write_ICPLB_DATA12(val) bfin_write32(ICPLB_DATA12,val) +#define pICPLB_DATA13 ((volatile unsigned long *)ICPLB_DATA13) +#define bfin_read_ICPLB_DATA13() bfin_read32(ICPLB_DATA13) +#define bfin_write_ICPLB_DATA13(val) bfin_write32(ICPLB_DATA13,val) +#define pICPLB_DATA14 ((volatile unsigned long *)ICPLB_DATA14) +#define bfin_read_ICPLB_DATA14() bfin_read32(ICPLB_DATA14) +#define bfin_write_ICPLB_DATA14(val) bfin_write32(ICPLB_DATA14,val) +#define pICPLB_DATA15 ((volatile unsigned long *)ICPLB_DATA15) +#define bfin_read_ICPLB_DATA15() bfin_read32(ICPLB_DATA15) +#define bfin_write_ICPLB_DATA15(val) bfin_write32(ICPLB_DATA15,val) +#define pITEST_COMMAND ((volatile unsigned long *)ITEST_COMMAND) +#define bfin_read_ITEST_COMMAND() bfin_read32(ITEST_COMMAND) +#define bfin_write_ITEST_COMMAND(val) bfin_write32(ITEST_COMMAND,val) +#if 0 +#define ITEST_INDEX 0xFFE01304 /* Instruction Test Index Register */ +#endif +#define pITEST_DATA0 ((volatile unsigned long *)ITEST_DATA0) +#define bfin_read_ITEST_DATA0() bfin_read32(ITEST_DATA0) +#define bfin_write_ITEST_DATA0(val) bfin_write32(ITEST_DATA0,val) +#define pITEST_DATA1 ((volatile unsigned long *)ITEST_DATA1) +#define bfin_read_ITEST_DATA1() bfin_read32(ITEST_DATA1) +#define bfin_write_ITEST_DATA1(val) bfin_write32(ITEST_DATA1,val) + +/* Event/Interrupt Registers*/ + +#define pEVT0 ((volatile void **)EVT0) +#define bfin_read_EVT0() bfin_read32(EVT0) +#define bfin_write_EVT0(val) bfin_write32(EVT0,val) +#define pEVT1 ((volatile void **)EVT1) +#define bfin_read_EVT1() bfin_read32(EVT1) +#define bfin_write_EVT1(val) bfin_write32(EVT1,val) +#define pEVT2 ((volatile void **)EVT2) +#define bfin_read_EVT2() bfin_read32(EVT2) +#define bfin_write_EVT2(val) bfin_write32(EVT2,val) +#define pEVT3 ((volatile void **)EVT3) +#define bfin_read_EVT3() bfin_read32(EVT3) +#define bfin_write_EVT3(val) bfin_write32(EVT3,val) +#define pEVT4 ((volatile void **)EVT4) +#define bfin_read_EVT4() bfin_read32(EVT4) +#define bfin_write_EVT4(val) bfin_write32(EVT4,val) +#define pEVT5 ((volatile void **)EVT5) +#define bfin_read_EVT5() bfin_read32(EVT5) +#define bfin_write_EVT5(val) bfin_write32(EVT5,val) +#define pEVT6 ((volatile void **)EVT6) +#define bfin_read_EVT6() bfin_read32(EVT6) +#define bfin_write_EVT6(val) bfin_write32(EVT6,val) +#define pEVT7 ((volatile void **)EVT7) +#define bfin_read_EVT7() bfin_read32(EVT7) +#define bfin_write_EVT7(val) bfin_write32(EVT7,val) +#define pEVT8 ((volatile void **)EVT8) +#define bfin_read_EVT8() bfin_read32(EVT8) +#define bfin_write_EVT8(val) bfin_write32(EVT8,val) +#define pEVT9 ((volatile void **)EVT9) +#define bfin_read_EVT9() bfin_read32(EVT9) +#define bfin_write_EVT9(val) bfin_write32(EVT9,val) +#define pEVT10 ((volatile void **)EVT10) +#define bfin_read_EVT10() bfin_read32(EVT10) +#define bfin_write_EVT10(val) bfin_write32(EVT10,val) +#define pEVT11 ((volatile void **)EVT11) +#define bfin_read_EVT11() bfin_read32(EVT11) +#define bfin_write_EVT11(val) bfin_write32(EVT11,val) +#define pEVT12 ((volatile void **)EVT12) +#define bfin_read_EVT12() bfin_read32(EVT12) +#define bfin_write_EVT12(val) bfin_write32(EVT12,val) +#define pEVT13 ((volatile void **)EVT13) +#define bfin_read_EVT13() bfin_read32(EVT13) +#define bfin_write_EVT13(val) bfin_write32(EVT13,val) +#define pEVT14 ((volatile void **)EVT14) +#define bfin_read_EVT14() bfin_read32(EVT14) +#define bfin_write_EVT14(val) bfin_write32(EVT14,val) +#define pEVT15 ((volatile void **)EVT15) +#define bfin_read_EVT15() bfin_read32(EVT15) +#define bfin_write_EVT15(val) bfin_write32(EVT15,val) +#define pIMASK ((volatile unsigned long *)IMASK) +#define bfin_read_IMASK() bfin_read32(IMASK) +#define bfin_write_IMASK(val) bfin_write32(IMASK,val) +#define pIPEND ((volatile unsigned long *)IPEND) +#define bfin_read_IPEND() bfin_read32(IPEND) +#define bfin_write_IPEND(val) bfin_write32(IPEND,val) +#define pILAT ((volatile unsigned long *)ILAT) +#define bfin_read_ILAT() bfin_read32(ILAT) +#define bfin_write_ILAT(val) bfin_write32(ILAT,val) + +/*Core Timer Registers*/ +#define pTCNTL ((volatile unsigned long *)TCNTL) +#define bfin_read_TCNTL() bfin_read32(TCNTL) +#define bfin_write_TCNTL(val) bfin_write32(TCNTL,val) +#define pTPERIOD ((volatile unsigned long *)TPERIOD) +#define bfin_read_TPERIOD() bfin_read32(TPERIOD) +#define bfin_write_TPERIOD(val) bfin_write32(TPERIOD,val) +#define pTSCALE ((volatile unsigned long *)TSCALE) +#define bfin_read_TSCALE() bfin_read32(TSCALE) +#define bfin_write_TSCALE(val) bfin_write32(TSCALE,val) +#define pTCOUNT ((volatile unsigned long *)TCOUNT) +#define bfin_read_TCOUNT() bfin_read32(TCOUNT) +#define bfin_write_TCOUNT(val) bfin_write32(TCOUNT,val) + +/*Debug/MP/Emulation Registers*/ +#define pDSPID ((volatile unsigned long *)DSPID) +#define bfin_read_DSPID() bfin_read32(DSPID) +#define bfin_write_DSPID(val) bfin_write32(DSPID,val) +#define pDBGCTL ((volatile unsigned long *)DBGCTL) +#define bfin_read_DBGCTL() bfin_read32(DBGCTL) +#define bfin_write_DBGCTL(val) bfin_write32(DBGCTL,val) +#define pDBGSTAT ((volatile unsigned long *)DBGSTAT) +#define bfin_read_DBGSTAT() bfin_read32(DBGSTAT) +#define bfin_write_DBGSTAT(val) bfin_write32(DBGSTAT,val) +#define pEMUDAT ((volatile unsigned long *)EMUDAT) +#define bfin_read_EMUDAT() bfin_read32(EMUDAT) +#define bfin_write_EMUDAT(val) bfin_write32(EMUDAT,val) + +/*Trace Buffer Registers*/ +#define pTBUFCTL ((volatile unsigned long *)TBUFCTL) +#define bfin_read_TBUFCTL() bfin_read32(TBUFCTL) +#define bfin_write_TBUFCTL(val) bfin_write32(TBUFCTL,val) +#define pTBUFSTAT ((volatile unsigned long *)TBUFSTAT) +#define bfin_read_TBUFSTAT() bfin_read32(TBUFSTAT) +#define bfin_write_TBUFSTAT(val) bfin_write32(TBUFSTAT,val) +#define pTBUF ((volatile void **)TBUF) +#define bfin_read_TBUF() bfin_read32(TBUF) +#define bfin_write_TBUF(val) bfin_write32(TBUF,val) + +/*Watch Point Control Registers*/ +#define pWPIACTL ((volatile unsigned long *)WPIACTL) +#define bfin_read_WPIACTL() bfin_read32(WPIACTL) +#define bfin_write_WPIACTL(val) bfin_write32(WPIACTL,val) +#define pWPIA0 ((volatile void **)WPIA0) +#define bfin_read_WPIA0() bfin_read32(WPIA0) +#define bfin_write_WPIA0(val) bfin_write32(WPIA0,val) +#define pWPIA1 ((volatile void **)WPIA1) +#define bfin_read_WPIA1() bfin_read32(WPIA1) +#define bfin_write_WPIA1(val) bfin_write32(WPIA1,val) +#define pWPIA2 ((volatile void **)WPIA2) +#define bfin_read_WPIA2() bfin_read32(WPIA2) +#define bfin_write_WPIA2(val) bfin_write32(WPIA2,val) +#define pWPIA3 ((volatile void **)WPIA3) +#define bfin_read_WPIA3() bfin_read32(WPIA3) +#define bfin_write_WPIA3(val) bfin_write32(WPIA3,val) +#define pWPIA4 ((volatile void **)WPIA4) +#define bfin_read_WPIA4() bfin_read32(WPIA4) +#define bfin_write_WPIA4(val) bfin_write32(WPIA4,val) +#define pWPIA5 ((volatile void **)WPIA5) +#define bfin_read_WPIA5() bfin_read32(WPIA5) +#define bfin_write_WPIA5(val) bfin_write32(WPIA5,val) +#define pWPIACNT0 ((volatile unsigned long *)WPIACNT0) +#define bfin_read_WPIACNT0() bfin_read32(WPIACNT0) +#define bfin_write_WPIACNT0(val) bfin_write32(WPIACNT0,val) +#define pWPIACNT1 ((volatile unsigned long *)WPIACNT1) +#define bfin_read_WPIACNT1() bfin_read32(WPIACNT1) +#define bfin_write_WPIACNT1(val) bfin_write32(WPIACNT1,val) +#define pWPIACNT2 ((volatile unsigned long *)WPIACNT2) +#define bfin_read_WPIACNT2() bfin_read32(WPIACNT2) +#define bfin_write_WPIACNT2(val) bfin_write32(WPIACNT2,val) +#define pWPIACNT3 ((volatile unsigned long *)WPIACNT3) +#define bfin_read_WPIACNT3() bfin_read32(WPIACNT3) +#define bfin_write_WPIACNT3(val) bfin_write32(WPIACNT3,val) +#define pWPIACNT4 ((volatile unsigned long *)WPIACNT4) +#define bfin_read_WPIACNT4() bfin_read32(WPIACNT4) +#define bfin_write_WPIACNT4(val) bfin_write32(WPIACNT4,val) +#define pWPIACNT5 ((volatile unsigned long *)WPIACNT5) +#define bfin_read_WPIACNT5() bfin_read32(WPIACNT5) +#define bfin_write_WPIACNT5(val) bfin_write32(WPIACNT5,val) +#define pWPDACTL ((volatile unsigned long *)WPDACTL) +#define bfin_read_WPDACTL() bfin_read32(WPDACTL) +#define bfin_write_WPDACTL(val) bfin_write32(WPDACTL,val) +#define pWPDA0 ((volatile void **)WPDA0) +#define bfin_read_WPDA0() bfin_read32(WPDA0) +#define bfin_write_WPDA0(val) bfin_write32(WPDA0,val) +#define pWPDA1 ((volatile void **)WPDA1) +#define bfin_read_WPDA1() bfin_read32(WPDA1) +#define bfin_write_WPDA1(val) bfin_write32(WPDA1,val) +#define pWPDACNT0 ((volatile unsigned long *)WPDACNT0) +#define bfin_read_WPDACNT0() bfin_read32(WPDACNT0) +#define bfin_write_WPDACNT0(val) bfin_write32(WPDACNT0,val) +#define pWPDACNT1 ((volatile unsigned long *)WPDACNT1) +#define bfin_read_WPDACNT1() bfin_read32(WPDACNT1) +#define bfin_write_WPDACNT1(val) bfin_write32(WPDACNT1,val) +#define pWPSTAT ((volatile unsigned long *)WPSTAT) +#define bfin_read_WPSTAT() bfin_read32(WPSTAT) +#define bfin_write_WPSTAT(val) bfin_write32(WPSTAT,val) + +/*Performance Monitor Registers*/ +#define pPFCTL ((volatile unsigned long *)PFCTL) +#define bfin_read_PFCTL() bfin_read32(PFCTL) +#define bfin_write_PFCTL(val) bfin_write32(PFCTL,val) +#define pPFCNTR0 ((volatile unsigned long *)PFCNTR0) +#define bfin_read_PFCNTR0() bfin_read32(PFCNTR0) +#define bfin_write_PFCNTR0(val) bfin_write32(PFCNTR0,val) +#define pPFCNTR1 ((volatile unsigned long *)PFCNTR1) +#define bfin_read_PFCNTR1() bfin_read32(PFCNTR1) +#define bfin_write_PFCNTR1(val) bfin_write32(PFCNTR1,val) + +/* +#define IPRIO 0xFFE02110 +*/ + +#if defined(CONFIG_BFIN_ALIVE_LED) +#define pCONFIG_BFIN_ALIVE_LED_DPORT \ + (volatile unsigned short *)CONFIG_BFIN_ALIVE_LED_DPORT +#define pCONFIG_BFIN_ALIVE_LED_PORT \ + (volatile unsigned short *)CONFIG_BFIN_ALIVE_LED_PORT +#endif + +#if defined(CONFIG_BFIN_IDLE_LED) +#define pCONFIG_BFIN_IDLE_LED_DPORT \ + (volatile unsigned short *)CONFIG_BFIN_IDLE_LED_DPORT +#define pCONFIG_BFIN_IDLE_LED_PORT \ + (volatile unsigned short *)CONFIG_BFIN_IDLE_LED_PORT +#endif + +#endif /* _CDEF_LPBLACKFIN_H */ diff --git a/include/asm-blackfin/mach-common/context.S b/include/asm-blackfin/mach-common/context.S new file mode 100644 index 0000000000..fd0ebe1862 --- /dev/null +++ b/include/asm-blackfin/mach-common/context.S @@ -0,0 +1,350 @@ +/* + * File: arch/blackfin/kernel/context.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Code to save processor context. + * We even save the register which are preserved by a function call + * - r4, r5, r6, r7, p3, p4, p5 + */ +.macro save_context_with_interrupts + [--sp] = SYSCFG; + + [--sp] = P0; /*orig_p0*/ + [--sp] = R0; /*orig_r0*/ + + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = r0; /* Skip IPEND as well. */ + /* Switch to other method of keeping interrupts disabled. */ +#ifdef CONFIG_DEBUG_HWERR + r0 = 0x3f; + sti r0; +#else + cli r0; +#endif + [--sp] = RETI; /*orig_pc*/ + /* Clear all L registers. */ + r0 = 0 (x); + l0 = r0; + l1 = r0; + l2 = r0; + l3 = r0; +.endm + +.macro save_context_syscall + [--sp] = SYSCFG; + + [--sp] = P0; /*orig_p0*/ + [--sp] = R0; /*orig_r0*/ + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = r0; /* Skip IPEND as well. */ + [--sp] = RETI; /*orig_pc*/ + /* Clear all L registers. */ + r0 = 0 (x); + l0 = r0; + l1 = r0; + l2 = r0; + l3 = r0; +.endm + +.macro save_context_no_interrupts + [--sp] = SYSCFG; + [--sp] = P0; /* orig_p0 */ + [--sp] = R0; /* orig_r0 */ + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + +#ifdef CONFIG_KGDB + fp = 0(Z); + r1 = sp; + r1 += 60; + r1 += 60; + r1 += 60; + [--sp] = r1; +#else + [--sp] = r0; /* Skip reserved */ +#endif + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; +#ifdef CONFIG_KGDB + r1.l = lo(IPEND); + r1.h = hi(IPEND); + [--sp] = r1; +#else + [--sp] = r0; /* Skip IPEND as well. */ +#endif + [--sp] = r0; /*orig_pc*/ + /* Clear all L registers. */ + r0 = 0 (x); + l0 = r0; + l1 = r0; + l2 = r0; + l3 = r0; +.endm + +.macro restore_context_no_interrupts + sp += 4; /* Skip orig_pc */ + sp += 4; /* Skip IPEND */ + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + r0 = [sp++]; + RETI = r0; /* Restore RETI indirectly when in exception */ + RETS = [sp++]; + + sp += 4; /* Skip Reserved */ + + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + sp += 4; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + sp += 8; /* Skip orig_r0/orig_p0 */ + SYSCFG = [sp++]; +.endm + +.macro restore_context_with_interrupts + sp += 4; /* Skip orig_pc */ + sp += 4; /* Skip IPEND */ + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + RETI = [sp++]; + RETS = [sp++]; + + p0.h = _irq_flags; + p0.l = _irq_flags; + r0 = [p0]; + sti r0; + + sp += 4; /* Skip Reserved */ + + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + sp += 4; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + sp += 8; /* Skip orig_r0/orig_p0 */ + csync; + SYSCFG = [sp++]; + csync; +.endm + diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h new file mode 100644 index 0000000000..76103526ae --- /dev/null +++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h @@ -0,0 +1,691 @@ + /* + * File: include/asm-blackfin/mach-common/def_LPBlackfin.h + * Based on: + * Author: unknown + * COPYRIGHT 2005 Analog Devices + * Created: ? + * Description: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532/33 */ + +#ifndef _DEF_LPBLACKFIN_H +#define _DEF_LPBLACKFIN_H + +#include + +/*#if !defined(__ADSPLPBLACKFIN__) +#warning def_LPBlackfin.h should only be included for 532 compatible chips. +#endif +*/ + +#define MK_BMSK_(x) (1<31 */ +#define TEST_WAY0 0x00000000 /* Access Way0 */ +#define TEST_WAY1 0x04000000 /* Access Way1 */ +/* ITEST_COMMAND only */ +#define TEST_WAY2 0x08000000 /* Access Way2 */ +#define TEST_WAY3 0x0C000000 /* Access Way3 */ +/* DTEST_COMMAND only */ +#define TEST_BNKSELA 0x00000000 /* Access SuperBank A */ +#define TEST_BNKSELB 0x00800000 /* Access SuperBank B */ + +#endif /* _DEF_LPBLACKFIN_H */ diff --git a/include/asm-blackfin/macros.h b/include/asm-blackfin/macros.h new file mode 100644 index 0000000000..c0c04a2f2d --- /dev/null +++ b/include/asm-blackfin/macros.h @@ -0,0 +1,95 @@ +/************************************************************************ + * + * macros.h + * + * (c) Copyright 2001-2003 Analog Devices, Inc. All rights reserved. + * + ************************************************************************/ + +/* Defines various assembly macros. */ + +#ifndef _MACROS_H +#define _MACROS_H + +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + +/* + * Set the corresponding bits in a System Register (SR); + * All bits set in "mask" will be set in the system register + * specified by "sys_reg" bitset_SR(sys_reg, mask), where + * sys_reg is the system register and mask are the bits to be set. + */ +#define bitset_SR(sys_reg, mask)\ + [--SP] = (R7:6);\ + r7 = sys_reg;\ + r6.l = (mask) & 0xffff;\ + r6.h = (mask) >> 16;\ + r7 = r7 | r6;\ + sys_reg = r7;\ + csync;\ + (R7:6) = [SP++] + +/* + * Clear the corresponding bits in a System Register (SR); + * All bits set in "mask" will be cleared in the SR + * specified by "sys_reg" bitclr_SR(sys_reg, mask), where + * sys_reg is the SR and mask are the bits to be cleared. + */ +#define bitclr_SR(sys_reg, mask)\ + [--SP] = (R7:6);\ + r7 = sys_reg;\ + r7 =~ r7;\ + r6.l = (mask) & 0xffff;\ + r6.h = (mask) >> 16;\ + r7 = r7 | r6;\ + r7 =~ r7;\ + sys_reg = r7;\ + csync;\ + (R7:6) = [SP++] + +/* + * Set the corresponding bits in a Memory Mapped Register (MMR); + * All bits set in "mask" will be set in the MMR specified by "mmr_reg" + * bitset_MMR(mmr_reg, mask), where mmr_reg is the MMR and mask are + * the bits to be set. + */ +#define bitset_MMR(mmr_reg, mask)\ + [--SP] = (R7:6);\ + [--SP] = P5;\ + p5.l = mmr_reg & 0xffff;\ + p5.h = mmr_reg >> 16;\ + r7 = [p5];\ + r6.l = (mask) & 0xffff;\ + r6.h = (mask) >> 16;\ + r7 = r7 | r6;\ + [p5] = r7;\ + csync;\ + p5 = [SP++];\ + (R7:6) = [SP++] + +/* + * Clear the corresponding bits in a Memory Mapped Register (MMR); + * All bits set in "mask" will be cleared in the MMR specified by "mmr_reg" + * bitclr_MMRreg(mmr_reg, mask), where sys_reg is the MMR and mask are + * the bits to be cleared. + */ +#define bitclr_MMR(mmr_reg, mask)\ + [--SP] = (R7:6);\ + [--SP] = P5;\ + p5.l = mmr_reg & 0xffff;\ + p5.h = mmr_reg >> 16;\ + r7 = [p5];\ + r7 =~ r7;\ + r6.l = (mask) & 0xffff;\ + r6.h = (mask) >> 16;\ + r7 = r7 | r6;\ + r7 =~ r7;\ + [p5] = r7;\ + csync;\ + p5 = [SP++];\ + (R7:6) = [SP++] + +#endif /* _MACROS_H */ diff --git a/include/asm-blackfin/mem_map.h b/include/asm-blackfin/mem_map.h new file mode 100644 index 0000000000..42d1f37f6d --- /dev/null +++ b/include/asm-blackfin/mem_map.h @@ -0,0 +1,12 @@ +/* + * mem_map.h + * Common header file for blackfin family of processors. + * + */ + +#ifndef _MEM_MAP_H_ +#define _MEM_MAP_H_ + +#include + +#endif /* _MEM_MAP_H_ */ diff --git a/include/asm-blackfin/mman.h b/include/asm-blackfin/mman.h new file mode 100644 index 0000000000..4d504f908c --- /dev/null +++ b/include/asm-blackfin/mman.h @@ -0,0 +1,45 @@ +#ifndef __BFIN_MMAN_H__ +#define __BFIN_MMAN_H__ + +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_SEM 0x8 /* page may be used for atomic ops */ +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_TYPE 0x0f /* Mask for type of mapping */ +#define MAP_FIXED 0x10 /* Interpret addr exactly */ +#define MAP_ANONYMOUS 0x20 /* don't use a file */ + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ +#define MAP_UNINITIALIZE 0x4000000 /* For anonymous mmap, memory could + be uninitialized. */ + +#define MS_ASYNC 1 /* sync memory asynchronously */ +#define MS_INVALIDATE 2 /* invalidate the caches */ +#define MS_SYNC 4 /* synchronous memory sync */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0x0 /* default page-in behavior */ +#define MADV_RANDOM 0x1 /* page-in minimum required */ +#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ +#define MADV_WILLNEED 0x3 /* pre-fault pages */ +#define MADV_DONTNEED 0x4 /* discard these pages */ + +/* compatibility flags */ +#define MAP_ANON MAP_ANONYMOUS +#define MAP_FILE 0 + +#endif /* __BFIN_MMAN_H__ */ diff --git a/include/asm-blackfin/mmu.h b/include/asm-blackfin/mmu.h new file mode 100644 index 0000000000..11d52f1167 --- /dev/null +++ b/include/asm-blackfin/mmu.h @@ -0,0 +1,30 @@ +#ifndef __MMU_H +#define __MMU_H + +/* Copyright (C) 2002, David McCullough */ + +struct sram_list_struct { + struct sram_list_struct *next; + void *addr; + size_t length; +}; + +typedef struct { + struct vm_list_struct *vmlist; + unsigned long end_brk; + unsigned long stack_start; + + /* Points to the location in SDRAM where the L1 stack is normally + saved, or NULL if the stack is always in SDRAM. */ + void *l1_stack_save; + + struct sram_list_struct *sram_list; + +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif + +} mm_context_t; + +#endif diff --git a/include/asm-blackfin/mmu_context.h b/include/asm-blackfin/mmu_context.h new file mode 100644 index 0000000000..c5c71a6aaf --- /dev/null +++ b/include/asm-blackfin/mmu_context.h @@ -0,0 +1,129 @@ +/* + * File: include/asm-blackfin/mmu_context.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __BLACKFIN_MMU_CONTEXT_H__ +#define __BLACKFIN_MMU_CONTEXT_H__ + +#include +#include +#include + +extern void *current_l1_stack_save; +extern int nr_l1stack_tasks; +extern void *l1_stack_base; +extern unsigned long l1_stack_len; + +extern int l1sram_free(const void*); +extern void *l1sram_alloc_max(void*); + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* Called when creating a new context during fork() or execve(). */ +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + return 0; +} + +static inline void free_l1stack(void) +{ + nr_l1stack_tasks--; + if (nr_l1stack_tasks == 0) + l1sram_free(l1_stack_base); +} +static inline void destroy_context(struct mm_struct *mm) +{ + struct sram_list_struct *tmp; + + if (current_l1_stack_save == mm->context.l1_stack_save) + current_l1_stack_save = 0; + if (mm->context.l1_stack_save) + free_l1stack(); + + while ((tmp = mm->context.sram_list)) { + mm->context.sram_list = tmp->next; + sram_free(tmp->addr); + kfree(tmp); + } +} + +static inline unsigned long +alloc_l1stack(unsigned long length, unsigned long *stack_base) +{ + if (nr_l1stack_tasks == 0) { + l1_stack_base = l1sram_alloc_max(&l1_stack_len); + if (!l1_stack_base) + return 0; + } + + if (l1_stack_len < length) { + if (nr_l1stack_tasks == 0) + l1sram_free(l1_stack_base); + return 0; + } + *stack_base = (unsigned long)l1_stack_base; + nr_l1stack_tasks++; + return l1_stack_len; +} + +static inline int +activate_l1stack(struct mm_struct *mm, unsigned long sp_base) +{ + if (current_l1_stack_save) + memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len); + mm->context.l1_stack_save = current_l1_stack_save = (void*)sp_base; + memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len); + return 1; +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +static inline void activate_mm(struct mm_struct *prev_mm, + struct mm_struct *next_mm) +{ + if (!next_mm->context.l1_stack_save) + return; + if (next_mm->context.l1_stack_save == current_l1_stack_save) + return; + if (current_l1_stack_save) { + memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len); + } + current_l1_stack_save = next_mm->context.l1_stack_save; + memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len); +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + activate_mm(prev, next); +} + +#endif diff --git a/include/asm-blackfin/module.h b/include/asm-blackfin/module.h new file mode 100644 index 0000000000..3c7ce16442 --- /dev/null +++ b/include/asm-blackfin/module.h @@ -0,0 +1,19 @@ +#ifndef _ASM_BFIN_MODULE_H +#define _ASM_BFIN_MODULE_H + +#define MODULE_SYMBOL_PREFIX "_" + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr +#define FLG_CODE_IN_L1 0x10 +#define FLG_DATA_IN_L1 0x20 + +struct mod_arch_specific { + Elf_Shdr *text_l1; + Elf_Shdr *data_a_l1; + Elf_Shdr *bss_a_l1; + Elf_Shdr *data_b_l1; + Elf_Shdr *bss_b_l1; +}; +#endif /* _ASM_BFIN_MODULE_H */ diff --git a/include/asm-blackfin/msgbuf.h b/include/asm-blackfin/msgbuf.h new file mode 100644 index 0000000000..6fcbe8cd80 --- /dev/null +++ b/include/asm-blackfin/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _BFIN_MSGBUF_H +#define _BFIN_MSGBUF_H + +/* + * The msqid64_ds structure for bfin architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _BFIN_MSGBUF_H */ diff --git a/include/asm-blackfin/mutex.h b/include/asm-blackfin/mutex.h new file mode 100644 index 0000000000..458c1f7fbc --- /dev/null +++ b/include/asm-blackfin/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/include/asm-blackfin/namei.h b/include/asm-blackfin/namei.h new file mode 100644 index 0000000000..8b89a2d65c --- /dev/null +++ b/include/asm-blackfin/namei.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm/namei.h + * + * Included from linux/fs/namei.c + * + * Changes made by Lineo Inc. May 2001 + */ + +#ifndef __BFIN_NAMEI_H +#define __BFIN_NAMEI_H + +/* This dummy routine maybe changed to something useful + * for /usr/gnemul/ emulation stuff. + * Look at asm-sparc/namei.h for details. + */ + +#define __emul_prefix() NULL + +#endif diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h new file mode 100644 index 0000000000..ffad947f1b --- /dev/null +++ b/include/asm-blackfin/page.h @@ -0,0 +1,89 @@ +#ifndef _BLACKFIN_PAGE_H +#define _BLACKFIN_PAGE_H + +/* PAGE_SHIFT determines the page size */ + +#define PAGE_SHIFT 12 +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifdef __KERNEL__ + +#include + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr,pg) clear_page(page) +#define copy_user_page(to, from, vaddr,pg) copy_page(to, from) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { + unsigned long pte; +} pte_t; +typedef struct { + unsigned long pmd[16]; +} pmd_t; +typedef struct { + unsigned long pgd; +} pgd_t; +typedef struct { + unsigned long pgprot; +} pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((&x)->pmd[0]) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif /* !__ASSEMBLY__ */ + +#include +#include + +#define PAGE_OFFSET (PAGE_OFFSET_RAW) + +#ifndef __ASSEMBLY__ + +#define __pa(vaddr) virt_to_phys((void *)(vaddr)) +#define __va(paddr) phys_to_virt((unsigned long)(paddr)) + +#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) + +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) +#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) +#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) +#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) + +#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) +#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) +#define pfn_valid(pfn) ((pfn) < max_mapnr) + +#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ + ((void *)(kaddr) < (void *)memory_end)) + +#include + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* _BLACKFIN_PAGE_H */ diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h new file mode 100644 index 0000000000..3b671d5fd7 --- /dev/null +++ b/include/asm-blackfin/page_offset.h @@ -0,0 +1,6 @@ + +/* This handles the memory map.. */ + +#ifdef CONFIG_BFIN +#define PAGE_OFFSET_RAW 0x00000000 +#endif diff --git a/include/asm-blackfin/param.h b/include/asm-blackfin/param.h new file mode 100644 index 0000000000..41564a6347 --- /dev/null +++ b/include/asm-blackfin/param.h @@ -0,0 +1,22 @@ +#ifndef _BLACKFIN_PARAM_H +#define _BLACKFIN_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ +#define USER_HZ 100 +#define CLOCKS_PER_SEC (USER_HZ) +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _BLACKFIN_PARAM_H */ diff --git a/include/asm-blackfin/pci.h b/include/asm-blackfin/pci.h new file mode 100644 index 0000000000..61277358c8 --- /dev/null +++ b/include/asm-blackfin/pci.h @@ -0,0 +1,148 @@ +/* Changed from asm-m68k version, Lineo Inc. May 2001 */ + +#ifndef _ASM_BFIN_PCI_H +#define _ASM_BFIN_PCI_H + +#include + +/* + * + * Written by Wout Klaren. + */ + +/* Added by Chang Junxiao */ +#define PCIBIOS_MIN_IO 0x00001000 +#define PCIBIOS_MIN_MEM 0x10000000 + +#define PCI_DMA_BUS_IS_PHYS (1) +struct pci_ops; + +/* + * Structure with hardware dependent information and functions of the + * PCI bus. + */ +struct pci_bus_info { + + /* + * Resources of the PCI bus. + */ + struct resource mem_space; + struct resource io_space; + + /* + * System dependent functions. + */ + struct pci_ops *bfin_pci_ops; + void (*fixup) (int pci_modify); + void (*conf_device) (unsigned char bus, unsigned char device_fn); +}; + +#define pcibios_assign_all_busses() 0 +static inline void pcibios_set_master(struct pci_dev *dev) +{ + + /* No special bus mastering setup handling */ +} +static inline void pcibios_penalize_isa_irq(int irq) +{ + + /* We don't do dynamic PCI IRQ allocation */ +} +static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, + size_t size, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* return virt_to_bus(ptr); */ + return (dma_addr_t) ptr; +} + +/* Unmap a single streaming mode DMA translation. The dma_addr and size + * must match what was provided for in a previous pci_map_single call. All + * other usages are undefined. + * + * After this call, reads by the cpu to the buffer are guarenteed to see + * whatever the device wrote there. + */ +static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, + size_t size, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* Nothing to do */ +} + +/* Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scather-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, + int nents, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + return nents; +} + +/* Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, + int nents, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* Nothing to do */ +} + +/* Make physical memory consistent for a single + * streaming mode DMA translation after a transfer. + * + * If you perform a pci_map_single() but wish to interrogate the + * buffer using the cpu, yet do not wish to teardown the PCI dma + * mapping, you must call this function before doing so. At the + * next point you give the PCI dma address back to the card, the + * device again owns the buffer. + */ +static inline void pci_dma_sync_single(struct pci_dev *hwdev, + dma_addr_t dma_handle, size_t size, + int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* Nothing to do */ +} + +/* Make physical memory consistent for a set of streaming + * mode DMA translations after a transfer. + * + * The same as pci_dma_sync_single but for a scatter-gather list, + * same rules and usage. + */ +static inline void pci_dma_sync_sg(struct pci_dev *hwdev, + struct scatterlist *sg, int nelems, + int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + /* Nothing to do */ +} + +#endif /* _ASM_BFIN_PCI_H */ diff --git a/include/asm-blackfin/percpu.h b/include/asm-blackfin/percpu.h new file mode 100644 index 0000000000..78dd61f6b3 --- /dev/null +++ b/include/asm-blackfin/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_BLACKFIN_PERCPU__ +#define __ARCH_BLACKFIN_PERCPU__ + +#include + +#endif /* __ARCH_BLACKFIN_PERCPU__ */ diff --git a/include/asm-blackfin/pgalloc.h b/include/asm-blackfin/pgalloc.h new file mode 100644 index 0000000000..c686e0542f --- /dev/null +++ b/include/asm-blackfin/pgalloc.h @@ -0,0 +1,8 @@ +#ifndef _BLACKFIN_PGALLOC_H +#define _BLACKFIN_PGALLOC_H + +#include + +#define check_pgt_cache() do { } while (0) + +#endif /* _BLACKFIN_PGALLOC_H */ diff --git a/include/asm-blackfin/pgtable.h b/include/asm-blackfin/pgtable.h new file mode 100644 index 0000000000..5a8f9e431c --- /dev/null +++ b/include/asm-blackfin/pgtable.h @@ -0,0 +1,96 @@ +#ifndef _BLACKFIN_PGTABLE_H +#define _BLACKFIN_PGTABLE_H + +#include + +#include +#include + +typedef pte_t *pte_addr_t; +/* +* Trivial page table functions. +*/ +#define pgd_present(pgd) (1) +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) + +#define pmd_offset(a, b) ((void *)0) +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x)) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) + +#define kern_addr_valid(addr) (1) + +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ + +extern void paging_init(void); + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +static inline int pte_file(pte_t pte) +{ + return 0; +} + +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) + +/* + * Page assess control based on Blackfin CPLB management + */ +#define _PAGE_RD (CPLB_USER_RD) +#define _PAGE_WR (CPLB_USER_WR) +#define _PAGE_USER (CPLB_USER_RD | CPLB_USER_WR) +#define _PAGE_ACCESSED CPLB_ALL_ACCESS +#define _PAGE_DIRTY (CPLB_DIRTY) + +#define PTE_BIT_FUNC(fn, op) \ + static inline pte_t pte_##fn(pte_t _pte) { _pte.pte op; return _pte; } + +PTE_BIT_FUNC(rdprotect, &= ~_PAGE_RD); +PTE_BIT_FUNC(mkread, |= _PAGE_RD); +PTE_BIT_FUNC(wrprotect, &= ~_PAGE_WR); +PTE_BIT_FUNC(mkwrite, |= _PAGE_WR); +PTE_BIT_FUNC(exprotect, &= ~_PAGE_USER); +PTE_BIT_FUNC(mkexec, |= _PAGE_USER); +PTE_BIT_FUNC(mkclean, &= ~_PAGE_DIRTY); +PTE_BIT_FUNC(mkdirty, |= _PAGE_DIRTY); +PTE_BIT_FUNC(mkold, &= ~_PAGE_ACCESSED); +PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED); + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(0)) + +extern unsigned int kobjsize(const void *objp); + +#define swapper_pg_dir ((pgd_t *) 0) +/* + * No page table caches to initialise. + */ +#define pgtable_cache_init() do { } while (0) +#define io_remap_pfn_range remap_pfn_range + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +#include + +#endif /* _BLACKFIN_PGTABLE_H */ diff --git a/include/asm-blackfin/poll.h b/include/asm-blackfin/poll.h new file mode 100644 index 0000000000..94cc2636e0 --- /dev/null +++ b/include/asm-blackfin/poll.h @@ -0,0 +1,24 @@ +#ifndef __BFIN_POLL_H +#define __BFIN_POLL_H + +#define POLLIN 1 +#define POLLPRI 2 +#define POLLOUT 4 +#define POLLERR 8 +#define POLLHUP 16 +#define POLLNVAL 32 +#define POLLRDNORM 64 +#define POLLWRNORM POLLOUT +#define POLLRDBAND 128 +#define POLLWRBAND 256 +#define POLLMSG 0x0400 +#define POLLREMOVE 0x1000 +#define POLLRDHUP 0x2000 + +struct pollfd { + int fd; + short events; + short revents; +}; + +#endif /* __BFIN_POLL_H */ diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h new file mode 100644 index 0000000000..c3fa50fa50 --- /dev/null +++ b/include/asm-blackfin/posix_types.h @@ -0,0 +1,65 @@ +#ifndef __ARCH_BFIN_POSIX_TYPES_H +#define __ARCH_BFIN_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned int __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char *__kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h new file mode 100644 index 0000000000..997465c93e --- /dev/null +++ b/include/asm-blackfin/processor.h @@ -0,0 +1,130 @@ +#ifndef __ASM_BFIN_PROCESSOR_H +#define __ASM_BFIN_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include +#include +#include + +static inline unsigned long rdusp(void) +{ + unsigned long usp; + + __asm__ __volatile__("%0 = usp;\n\t":"=da"(usp)); + return usp; +} + +static inline void wrusp(unsigned long usp) +{ + __asm__ __volatile__("usp = %0;\n\t"::"da"(usp)); +} + +/* + * User space process size: 1st byte beyond user address space. + */ +extern unsigned long memory_end; +#define TASK_SIZE (memory_end) + +#define TASK_UNMAPPED_BASE 0 + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short seqstat; /* saved status register */ + unsigned long esp0; /* points to SR of stack frame pt_regs */ + unsigned long pc; /* instruction pointer */ + void * debuggerinfo; +}; + +#define INIT_THREAD { \ + sizeof(init_stack) + (unsigned long) init_stack, 0, \ + PS_S, 0, 0 \ +} + +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); \ + (_regs)->pc = (_pc); \ + if (current->mm) \ + (_regs)->p5 = current->mm->start_data; \ + current->thread_info->l1_task_info.stack_start \ + = (void *)current->mm->context.stack_start; \ + current->thread_info->l1_task_info.lowest_sp = (void *)(_usp); \ + memcpy(L1_SCRATCH_TASK_INFO, ¤t->thread_info->l1_task_info, \ + sizeof(*L1_SCRATCH_TASK_INFO)); \ + wrusp(_usp); \ +} while(0) + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +#define prepare_to_copy(tsk) do { } while (0) + +extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags); + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + MAP_NR((tsk)->thread.esp0) < max_mapnr) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) + +#define cpu_relax() barrier() + +/* Get the Silicon Revision of the chip */ +static inline uint32_t bfin_revid(void) +{ + /* stored in the upper 4 bits */ + return bfin_read_CHIPID() >> 28; +} + +static inline uint32_t bfin_compiled_revid(void) +{ +#if defined(CONFIG_BF_REV_0_0) + return 0; +#elif defined(CONFIG_BF_REV_0_1) + return 1; +#elif defined(CONFIG_BF_REV_0_2) + return 2; +#elif defined(CONFIG_BF_REV_0_3) + return 3; +#elif defined(CONFIG_BF_REV_0_4) + return 4; +#elif defined(CONFIG_BF_REV_0_5) + return 5; +#endif +} + +#endif diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h new file mode 100644 index 0000000000..b8346cd3a6 --- /dev/null +++ b/include/asm-blackfin/ptrace.h @@ -0,0 +1,166 @@ +#ifndef _BFIN_PTRACE_H +#define _BFIN_PTRACE_H + +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 7 are data registers R0-R7 + * 8 - 15 are address registers P0-P7 + * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3 + * 32 - 33 A registers A0 & A1 + * 34 - status register + * ----------------------------- + * + * We follows above, except: + * 32-33 --- Low 32-bit of A0&1 + * 34-35 --- High 8-bit of A0&1 + */ + +#ifndef __ASSEMBLY__ + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long orig_pc; + long ipend; + long seqstat; + long rete; + long retn; + long retx; + long pc; /* PC == RETI */ + long rets; + long reserved; /* Used as scratch during system calls */ + long astat; + long lb1; + long lb0; + long lt1; + long lt0; + long lc1; + long lc0; + long a1w; + long a1x; + long a0w; + long a0x; + long b3; + long b2; + long b1; + long b0; + long l3; + long l2; + long l1; + long l0; + long m3; + long m2; + long m1; + long m0; + long i3; + long i2; + long i1; + long i0; + long usp; + long fp; + long p5; + long p4; + long p3; + long p2; + long p1; + long p0; + long r7; + long r6; + long r5; + long r4; + long r3; + long r2; + long r1; + long r0; + long orig_r0; + long orig_p0; + long syscfg; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 /* ptrace signal */ + +#ifdef CONFIG_BINFMT_ELF_FDPIC +#define PTRACE_GETFDPIC 31 +#define PTRACE_GETFDPIC_EXEC 0 +#define PTRACE_GETFDPIC_INTERP 1 +#endif + +#define PS_S (0x0002) + +/* user_mode returns true if only one bit is set in IPEND, other than the + master interrupt enable. */ +#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1))) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs *); + +#endif /* __ASSEMBLY__ */ + +/* + * Offsets used by 'ptrace' system call interface. + */ + +#define PT_R0 204 +#define PT_R1 200 +#define PT_R2 196 +#define PT_R3 192 +#define PT_R4 188 +#define PT_R5 184 +#define PT_R6 180 +#define PT_R7 176 +#define PT_P0 172 +#define PT_P1 168 +#define PT_P2 164 +#define PT_P3 160 +#define PT_P4 156 +#define PT_P5 152 +#define PT_FP 148 +#define PT_USP 144 +#define PT_I0 140 +#define PT_I1 136 +#define PT_I2 132 +#define PT_I3 128 +#define PT_M0 124 +#define PT_M1 120 +#define PT_M2 116 +#define PT_M3 112 +#define PT_L0 108 +#define PT_L1 104 +#define PT_L2 100 +#define PT_L3 96 +#define PT_B0 92 +#define PT_B1 88 +#define PT_B2 84 +#define PT_B3 80 +#define PT_A0X 76 +#define PT_A0W 72 +#define PT_A1X 68 +#define PT_A1W 64 +#define PT_LC0 60 +#define PT_LC1 56 +#define PT_LT0 52 +#define PT_LT1 48 +#define PT_LB0 44 +#define PT_LB1 40 +#define PT_ASTAT 36 +#define PT_RESERVED 32 +#define PT_RETS 28 +#define PT_PC 24 +#define PT_RETX 20 +#define PT_RETN 16 +#define PT_RETE 12 +#define PT_SEQSTAT 8 +#define PT_IPEND 4 + +#define PT_SYSCFG 216 +#define PT_TEXT_ADDR 220 +#define PT_TEXT_END_ADDR 224 +#define PT_DATA_ADDR 228 +#define PT_FDPIC_EXEC 232 +#define PT_FDPIC_INTERP 236 + +#endif /* _BFIN_PTRACE_H */ diff --git a/include/asm-blackfin/resource.h b/include/asm-blackfin/resource.h new file mode 100644 index 0000000000..091355ab34 --- /dev/null +++ b/include/asm-blackfin/resource.h @@ -0,0 +1,6 @@ +#ifndef _BFIN_RESOURCE_H +#define _BFIN_RESOURCE_H + +#include + +#endif /* _BFIN_RESOURCE_H */ diff --git a/include/asm-blackfin/scatterlist.h b/include/asm-blackfin/scatterlist.h new file mode 100644 index 0000000000..60e07b9204 --- /dev/null +++ b/include/asm-blackfin/scatterlist.h @@ -0,0 +1,26 @@ +#ifndef _BLACKFIN_SCATTERLIST_H +#define _BLACKFIN_SCATTERLIST_H + +#include + +struct scatterlist { + struct page *page; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_address(sg) (page_address((sg)->page) + (sg)->offset) +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0xffffffff) + +#endif /* !(_BLACKFIN_SCATTERLIST_H) */ diff --git a/include/asm-blackfin/sections.h b/include/asm-blackfin/sections.h new file mode 100644 index 0000000000..1443c3353a --- /dev/null +++ b/include/asm-blackfin/sections.h @@ -0,0 +1,7 @@ +#ifndef _BLACKFIN_SECTIONS_H +#define _BLACKFIN_SECTIONS_H + +/* nothing to see, move along */ +#include + +#endif diff --git a/include/asm-blackfin/segment.h b/include/asm-blackfin/segment.h new file mode 100644 index 0000000000..02cfd09b5a --- /dev/null +++ b/include/asm-blackfin/segment.h @@ -0,0 +1,7 @@ +#ifndef _BFIN_SEGMENT_H +#define _BFIN_SEGMENT_H + +#define KERNEL_DS (0x5) +#define USER_DS (0x1) + +#endif /* _BFIN_SEGMENT_H */ diff --git a/include/asm-blackfin/semaphore-helper.h b/include/asm-blackfin/semaphore-helper.h new file mode 100644 index 0000000000..9082b0dc3e --- /dev/null +++ b/include/asm-blackfin/semaphore-helper.h @@ -0,0 +1,82 @@ +/* Based on M68K version, Lineo Inc. May 2001 */ + +#ifndef _BFIN_SEMAPHORE_HELPER_H +#define _BFIN_SEMAPHORE_HELPER_H + +/* + * SMP- and interrupt-safe semaphores helper functions. + * + * (C) Copyright 1996 Linus Torvalds + * + */ + +#include + +/* + * These two _must_ execute atomically wrt each other. + */ +static inline void wake_one_more(struct semaphore *sem) +{ + atomic_inc(&sem->waking); +} + +static inline int waking_non_zero(struct semaphore *sem) +{ + int ret; + unsigned long flags = 0; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + ret = 0; + if (atomic_read(&sem->waking) > 0) { + atomic_dec(&sem->waking); + ret = 1; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +/* + * waking_non_zero_interruptible: + * 1 got the lock + * 0 go to sleep + * -EINTR interrupted + */ +static inline int waking_non_zero_interruptible(struct semaphore *sem, + struct task_struct *tsk) +{ + int ret = 0; + unsigned long flags = 0; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + if (atomic_read(&sem->waking) > 0) { + atomic_dec(&sem->waking); + ret = 1; + } else if (signal_pending(tsk)) { + atomic_inc(&sem->count); + ret = -EINTR; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +/* + * waking_non_zero_trylock: + * 1 failed to lock + * 0 got the lock + */ +static inline int waking_non_zero_trylock(struct semaphore *sem) +{ + int ret = 1; + unsigned long flags = 0; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + if (atomic_read(&sem->waking) > 0) { + atomic_dec(&sem->waking); + ret = 0; + } else + atomic_inc(&sem->count); + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +#endif /* _BFIN_SEMAPHORE_HELPER_H */ diff --git a/include/asm-blackfin/semaphore.h b/include/asm-blackfin/semaphore.h new file mode 100644 index 0000000000..94c04d7ab2 --- /dev/null +++ b/include/asm-blackfin/semaphore.h @@ -0,0 +1,106 @@ +#ifndef _BFIN_SEMAPHORE_H +#define _BFIN_SEMAPHORE_H + +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include +#include + +/* + * Interrupt-safe semaphores.. + * + * (C) Copyright 1996 Linus Torvalds + * + * BFIN version by akbar hussain Lineo Inc April 2001 + * + */ + +struct semaphore { + atomic_t count; + int sleepers; + wait_queue_head_t wait; +}; + +#define __SEMAPHORE_INITIALIZER(name, n) \ +{ \ + .count = ATOMIC_INIT(n), \ + .sleepers = 0, \ + .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \ +} + +#define __DECLARE_SEMAPHORE_GENERIC(name,count) \ + struct semaphore name = __SEMAPHORE_INITIALIZER(name,count) + +#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1) +#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0) + +static inline void sema_init(struct semaphore *sem, int val) +{ + *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val); +} + +static inline void init_MUTEX(struct semaphore *sem) +{ + sema_init(sem, 1); +} + +static inline void init_MUTEX_LOCKED(struct semaphore *sem) +{ + sema_init(sem, 0); +} + +asmlinkage void __down(struct semaphore *sem); +asmlinkage int __down_interruptible(struct semaphore *sem); +asmlinkage int __down_trylock(struct semaphore *sem); +asmlinkage void __up(struct semaphore *sem); + +extern spinlock_t semaphore_wake_lock; + +/* + * This is ugly, but we want the default case to fall through. + * "down_failed" is a special asm handler that calls the C + * routine that actually waits. + */ +static inline void down(struct semaphore *sem) +{ + might_sleep(); + if (atomic_dec_return(&sem->count) < 0) + __down(sem); +} + +static inline int down_interruptible(struct semaphore *sem) +{ + int ret = 0; + + might_sleep(); + if (atomic_dec_return(&sem->count) < 0) + ret = __down_interruptible(sem); + return (ret); +} + +static inline int down_trylock(struct semaphore *sem) +{ + int ret = 0; + + if (atomic_dec_return(&sem->count) < 0) + ret = __down_trylock(sem); + return ret; +} + +/* + * Note! This is subtle. We jump to wake people up only if + * the semaphore was negative (== somebody was waiting on it). + * The default case (no contention) will result in NO + * jumps for both down() and up(). + */ +static inline void up(struct semaphore *sem) +{ + if (atomic_inc_return(&sem->count) <= 0) + __up(sem); +} + +#endif /* __ASSEMBLY__ */ +#endif /* _BFIN_SEMAPHORE_H */ diff --git a/include/asm-blackfin/sembuf.h b/include/asm-blackfin/sembuf.h new file mode 100644 index 0000000000..18deb5c7fa --- /dev/null +++ b/include/asm-blackfin/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _BFIN_SEMBUF_H +#define _BFIN_SEMBUF_H + +/* + * The semid64_ds structure for bfin architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _BFIN_SEMBUF_H */ diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h new file mode 100644 index 0000000000..01c8c6cbe6 --- /dev/null +++ b/include/asm-blackfin/setup.h @@ -0,0 +1,17 @@ +/* +** asm/setup.h -- Definition of the Linux/bfin setup information +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Copyright Lineo, Inc 2001 Tony Kou +** +*/ + +#ifndef _BFIN_SETUP_H +#define _BFIN_SETUP_H + +#define COMMAND_LINE_SIZE 512 + +#endif /* _BFIN_SETUP_H */ diff --git a/include/asm-blackfin/shmbuf.h b/include/asm-blackfin/shmbuf.h new file mode 100644 index 0000000000..612436303e --- /dev/null +++ b/include/asm-blackfin/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _BFIN_SHMBUF_H +#define _BFIN_SHMBUF_H + +/* + * The shmid64_ds structure for bfin architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _BFIN_SHMBUF_H */ diff --git a/include/asm-blackfin/shmparam.h b/include/asm-blackfin/shmparam.h new file mode 100644 index 0000000000..3c03906b76 --- /dev/null +++ b/include/asm-blackfin/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _BFIN_SHMPARAM_H +#define _BFIN_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _BFIN_SHMPARAM_H */ diff --git a/include/asm-blackfin/sigcontext.h b/include/asm-blackfin/sigcontext.h new file mode 100644 index 0000000000..ce00b03c27 --- /dev/null +++ b/include/asm-blackfin/sigcontext.h @@ -0,0 +1,55 @@ +#ifndef _ASM_BLACKFIN_SIGCONTEXT_H +#define _ASM_BLACKFIN_SIGCONTEXT_H + +/* Add new entries at the end of the structure only. */ +struct sigcontext { + unsigned long sc_r0; + unsigned long sc_r1; + unsigned long sc_r2; + unsigned long sc_r3; + unsigned long sc_r4; + unsigned long sc_r5; + unsigned long sc_r6; + unsigned long sc_r7; + unsigned long sc_p0; + unsigned long sc_p1; + unsigned long sc_p2; + unsigned long sc_p3; + unsigned long sc_p4; + unsigned long sc_p5; + unsigned long sc_usp; + unsigned long sc_a0w; + unsigned long sc_a1w; + unsigned long sc_a0x; + unsigned long sc_a1x; + unsigned long sc_astat; + unsigned long sc_rets; + unsigned long sc_pc; + unsigned long sc_retx; + unsigned long sc_fp; + unsigned long sc_i0; + unsigned long sc_i1; + unsigned long sc_i2; + unsigned long sc_i3; + unsigned long sc_m0; + unsigned long sc_m1; + unsigned long sc_m2; + unsigned long sc_m3; + unsigned long sc_l0; + unsigned long sc_l1; + unsigned long sc_l2; + unsigned long sc_l3; + unsigned long sc_b0; + unsigned long sc_b1; + unsigned long sc_b2; + unsigned long sc_b3; + unsigned long sc_lc0; + unsigned long sc_lc1; + unsigned long sc_lt0; + unsigned long sc_lt1; + unsigned long sc_lb0; + unsigned long sc_lb1; + unsigned long sc_seqstat; +}; + +#endif diff --git a/include/asm-blackfin/siginfo.h b/include/asm-blackfin/siginfo.h new file mode 100644 index 0000000000..eca4565cea --- /dev/null +++ b/include/asm-blackfin/siginfo.h @@ -0,0 +1,35 @@ +#ifndef _BFIN_SIGINFO_H +#define _BFIN_SIGINFO_H + +#include +#include + +#define UID16_SIGINFO_COMPAT_NEEDED + +#define si_uid16 _sifields._kill._uid + +#define ILL_ILLPARAOP (__SI_FAULT|2) /* illegal opcode combine ********** */ +#define ILL_ILLEXCPT (__SI_FAULT|4) /* unrecoverable exception ********** */ +#define ILL_CPLB_VI (__SI_FAULT|9) /* D/I CPLB protect violation ******** */ +#define ILL_CPLB_MISS (__SI_FAULT|10) /* D/I CPLB miss ******** */ +#define ILL_CPLB_MULHIT (__SI_FAULT|11) /* D/I CPLB multiple hit ******** */ + +/* + * SIGBUS si_codes + */ +#define BUS_OPFETCH (__SI_FAULT|4) /* error from instruction fetch ******** */ + +/* + * SIGTRAP si_codes + */ +#define TRAP_STEP (__SI_FAULT|1) /* single-step breakpoint************* */ +#define TRAP_TRACEFLOW (__SI_FAULT|2) /* trace buffer overflow ************* */ +#define TRAP_WATCHPT (__SI_FAULT|3) /* watchpoint match ************* */ +#define TRAP_ILLTRAP (__SI_FAULT|4) /* illegal trap ************* */ + +/* + * SIGSEGV si_codes + */ +#define SEGV_STACKFLOW (__SI_FAULT|3) /* stack overflow */ + +#endif diff --git a/include/asm-blackfin/signal.h b/include/asm-blackfin/signal.h new file mode 100644 index 0000000000..0250429b73 --- /dev/null +++ b/include/asm-blackfin/signal.h @@ -0,0 +1,160 @@ +#ifndef _BLACKFIN_SIGNAL_H +#define _BLACKFIN_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer) (void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer) (void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction) (int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer) (void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +#include +#undef __HAVE_ARCH_SIG_BITOPS + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _BLACKFIN_SIGNAL_H */ diff --git a/include/asm-blackfin/socket.h b/include/asm-blackfin/socket.h new file mode 100644 index 0000000000..5213c96521 --- /dev/null +++ b/include/asm-blackfin/socket.h @@ -0,0 +1,53 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS +#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-blackfin/sockios.h b/include/asm-blackfin/sockios.h new file mode 100644 index 0000000000..426b89bfaa --- /dev/null +++ b/include/asm-blackfin/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_BFIN_SOCKIOS__ +#define __ARCH_BFIN_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* __ARCH_BFIN_SOCKIOS__ */ diff --git a/include/asm-blackfin/spinlock.h b/include/asm-blackfin/spinlock.h new file mode 100644 index 0000000000..64e908a506 --- /dev/null +++ b/include/asm-blackfin/spinlock.h @@ -0,0 +1,6 @@ +#ifndef __BFIN_SPINLOCK_H +#define __BFIN_SPINLOCK_H + +#error blackfin architecture does not support SMP spin lock yet + +#endif diff --git a/include/asm-blackfin/stat.h b/include/asm-blackfin/stat.h new file mode 100644 index 0000000000..d2b6f11ec2 --- /dev/null +++ b/include/asm-blackfin/stat.h @@ -0,0 +1,63 @@ +#ifndef _BFIN_STAT_H +#define _BFIN_STAT_H + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad1[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad2[4]; + + long long st_size; + unsigned long st_blksize; + + long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif /* _BFIN_STAT_H */ diff --git a/include/asm-blackfin/statfs.h b/include/asm-blackfin/statfs.h new file mode 100644 index 0000000000..350672091b --- /dev/null +++ b/include/asm-blackfin/statfs.h @@ -0,0 +1,6 @@ +#ifndef _BFIN_STATFS_H +#define _BFIN_STATFS_H + +#include + +#endif /* _BFIN_STATFS_H */ diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h new file mode 100644 index 0000000000..6f1eb7d6d3 --- /dev/null +++ b/include/asm-blackfin/string.h @@ -0,0 +1,104 @@ +#ifndef _BLACKFIN_STRING_H_ +#define _BLACKFIN_STRING_H_ + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#define __HAVE_ARCH_STRCPY +extern inline char *strcpy(char *dest, const char *src) +{ + char *xdest = dest; + char temp = 0; + + __asm__ __volatile__ + ("1:\t%2 = B [%1++] (Z);\n\t" + "B [%0++] = %2;\n\t" + "CC = %2;\n\t" + "if cc jump 1b (bp);\n" + : "+&a" (dest), "+&a" (src), "=&d" (temp) + ::"memory", "CC"); + return xdest; +} + +#define __HAVE_ARCH_STRNCPY +extern inline char *strncpy(char *dest, const char *src, size_t n) +{ + char *xdest = dest; + char temp = 0; + + if (n == 0) + return xdest; + + __asm__ __volatile__ + ("1:\t%3 = B [%1++] (Z);\n\t" + "B [%0++] = %3;\n\t" + "CC = %3;\n\t" + "if ! cc jump 2f;\n\t" + "%2 += -1;\n\t" + "CC = %2 == 0;\n\t" + "if ! cc jump 1b (bp);\n" + "2:\n" + : "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp) + ::"memory", "CC"); + return xdest; +} + +#define __HAVE_ARCH_STRCMP +extern inline int strcmp(const char *cs, const char *ct) +{ + char __res1, __res2; + + __asm__ + ("1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */ + "%3 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %2 == %3;\n\t" /* compare a byte */ + "if ! cc jump 2f;\n\t" /* not equal, break out */ + "CC = %2;\n\t" /* at end of cs? */ + "if cc jump 1b (bp);\n\t" /* no, keep going */ + "jump.s 3f;\n" /* strings are equal */ + "2:\t%2 = %2 - %3;\n" /* *cs - *ct */ + "3:\n" + : "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2) + : : "CC"); + + return __res1; +} + +#define __HAVE_ARCH_STRNCMP +extern inline int strncmp(const char *cs, const char *ct, size_t count) +{ + char __res1, __res2; + + if (!count) + return 0; + __asm__ + ("1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */ + "%4 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %3 == %4;\n\t" /* compare a byte */ + "if ! cc jump 3f;\n\t" /* not equal, break out */ + "CC = %3;\n\t" /* at end of cs? */ + "if ! cc jump 4f;\n\t" /* yes, all done */ + "%2 += -1;\n\t" /* no, adjust count */ + "CC = %2 == 0;\n\t" + "if ! cc jump 1b;\n" /* more to do, keep going */ + "2:\t%3 = 0;\n\t" /* strings are equal */ + "jump.s 4f;\n" + "3:\t%3 = %3 - %4;\n" /* *cs - *ct */ + "4:" + : "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2) + : : "CC"); + return __res1; +} + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *s, int c, size_t count); +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *d, const void *s, size_t count); +#define __HAVE_ARCH_MEMCMP +extern int memcmp(const void *, const void *, __kernel_size_t); +#define __HAVE_ARCH_MEMCHR +extern void *memchr(const void *s, int c, size_t n); +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *dest, const void *src, size_t count); + +#endif /*__KERNEL__*/ +#endif /* _BLACKFIN_STRING_H_ */ diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h new file mode 100644 index 0000000000..758bac7c1e --- /dev/null +++ b/include/asm-blackfin/system.h @@ -0,0 +1,250 @@ +/* + * File: include/asm/system.h + * Based on: + * Author: Tony Kou (tonyko@lineo.ca) + * Copyright (c) 2002 Arcturus Networks Inc. + * (www.arcturusnetworks.com) + * Copyright (c) 2003 Metrowerks (www.metrowerks.com) + * Copyright (c) 2004 Analog Device Inc. + * Created: 25Jan2001 - Tony Kou + * Description: system.h include file + * + * Modified: 22Sep2006 - Robin Getz + * - move include blackfin.h down, so I can get access to + * irq functions in other include files. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _BLACKFIN_SYSTEM_H +#define _BLACKFIN_SYSTEM_H + +#include +#include + +/* + * Interrupt configuring macros. + */ + +extern unsigned long irq_flags; + +#define local_irq_enable() do { \ + __asm__ __volatile__ ( \ + "sti %0;" \ + ::"d"(irq_flags)); \ +} while (0) + +#define local_irq_disable() do { \ + int _tmp_dummy; \ + __asm__ __volatile__ ( \ + "cli %0;" \ + :"=d" (_tmp_dummy):); \ +} while (0) + +#if defined(ANOMALY_05000244) && defined (CONFIG_BLKFIN_CACHE) +#define idle_with_irq_disabled() do { \ + __asm__ __volatile__ ( \ + "nop; nop;\n" \ + ".align 8;\n" \ + "sti %0; idle;\n" \ + ::"d" (irq_flags)); \ +} while (0) +#else +#define idle_with_irq_disabled() do { \ + __asm__ __volatile__ ( \ + ".align 8;\n" \ + "sti %0; idle;\n" \ + ::"d" (irq_flags)); \ +} while (0) +#endif + +#ifdef CONFIG_DEBUG_HWERR +#define __save_and_cli(x) do { \ + __asm__ __volatile__ ( \ + "cli %0;\n\tsti %1;" \ + :"=&d"(x): "d" (0x3F)); \ +} while (0) +#else +#define __save_and_cli(x) do { \ + __asm__ __volatile__ ( \ + "cli %0;" \ + :"=&d"(x):); \ +} while (0) +#endif + +#define local_save_flags(x) asm volatile ("cli %0;" \ + "sti %0;" \ + :"=d"(x):); + +#ifdef CONFIG_DEBUG_HWERR +#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0) +#else +#define irqs_enabled_from_flags(x) ((x) != 0x1f) +#endif + +#define local_irq_restore(x) do { \ + if (irqs_enabled_from_flags(x)) \ + local_irq_enable (); \ +} while (0) + +/* For spinlocks etc */ +#define local_irq_save(x) __save_and_cli(x) + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + !irqs_enabled_from_flags(flags); \ +}) + +/* + * Force strict CPU ordering. + */ +#define nop() asm volatile ("nop;\n\t"::) +#define mb() asm volatile ("" : : :"memory") +#define rmb() asm volatile ("" : : :"memory") +#define wmb() asm volatile ("" : : :"memory") +#define set_rmb(var, value) do { (void) xchg(&var, value); } while (0) +#define set_mb(var, value) set_rmb(var, value) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +#define read_barrier_depends() do { } while(0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +#define tas(ptr) ((void)xchg((ptr),1)) + +struct __xchg_dummy { + unsigned long a[100]; +}; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, + int size) +{ + unsigned long tmp = 0; + unsigned long flags = 0; + + local_irq_save(flags); + + switch (size) { + case 1: + __asm__ __volatile__ + ("%0 = b%2 (z);\n\t" + "b%2 = %1;\n\t" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("%0 = w%2 (z);\n\t" + "w%2 = %1;\n\t" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("%0 = %2;\n\t" + "%2 = %1;\n\t" + : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + } + local_irq_restore(flags); + return tmp; +} + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long tmp = 0; + unsigned long flags = 0; + + local_irq_save(flags); + + switch (size) { + case 1: + __asm__ __volatile__ + ("%0 = b%3 (z);\n\t" + "CC = %1 == %0;\n\t" + "IF !CC JUMP 1f;\n\t" + "b%3 = %2;\n\t" + "1:\n\t" + : "=&d" (tmp) : "d" (old), "d" (new), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("%0 = w%3 (z);\n\t" + "CC = %1 == %0;\n\t" + "IF !CC JUMP 1f;\n\t" + "w%3 = %2;\n\t" + "1:\n\t" + : "=&d" (tmp) : "d" (old), "d" (new), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("%0 = %3;\n\t" + "CC = %1 == %0;\n\t" + "IF !CC JUMP 1f;\n\t" + "%3 = %2;\n\t" + "1:\n\t" + : "=&d" (tmp) : "d" (old), "d" (new), "m" (*__xg(ptr)) : "memory"); + break; + } + local_irq_restore(flags); + return tmp; +} + +#define cmpxchg(ptr,o,n)\ + ((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\ + (unsigned long)(n),sizeof(*(ptr)))) + +#define prepare_to_switch() do { } while(0) + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. + */ + +#include + +asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next); + +#define switch_to(prev,next,last) \ +do { \ + memcpy (&prev->thread_info->l1_task_info, L1_SCRATCH_TASK_INFO, \ + sizeof *L1_SCRATCH_TASK_INFO); \ + memcpy (L1_SCRATCH_TASK_INFO, &next->thread_info->l1_task_info, \ + sizeof *L1_SCRATCH_TASK_INFO); \ + (last) = resume (prev, next); \ +} while (0) + +#endif /* _BLACKFIN_SYSTEM_H */ diff --git a/include/asm-blackfin/termbits.h b/include/asm-blackfin/termbits.h new file mode 100644 index 0000000000..2fd9dabdba --- /dev/null +++ b/include/asm-blackfin/termbits.h @@ -0,0 +1,184 @@ +#ifndef __ARCH_BFIN_TERMBITS_H__ +#define __ARCH_BFIN_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ARCH_BFIN_TERMBITS_H__ */ diff --git a/include/asm-blackfin/termios.h b/include/asm-blackfin/termios.h new file mode 100644 index 0000000000..5c41478a51 --- /dev/null +++ b/include/asm-blackfin/termios.h @@ -0,0 +1,106 @@ +#ifndef __BFIN_TERMIOS_H__ +#define __BFIN_TERMIOS_H__ + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +/* line disciplines */ +#define N_TTY 0 +#define N_SLIP 1 +#define N_MOUSE 2 +#define N_PPP 3 +#define N_STRIP 4 +#define N_AX25 5 +#define N_X25 6 /* X.25 async */ +#define N_6PACK 7 +#define N_MASC 8 /* Reserved for Mobitex module */ +#define N_R3964 9 /* Reserved for Simatic R3964 module */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ +#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */ +#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */ +#define N_HDLC 13 /* synchronous HDLC */ +#define N_SYNC_PPP 14 /* synchronous PPP */ +#define N_HCI 15 /* Bluetooth HCI UART */ + +#ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* __BFIN_TERMIOS_H__ */ diff --git a/include/asm-blackfin/thread_info.h b/include/asm-blackfin/thread_info.h new file mode 100644 index 0000000000..fa8f08cf28 --- /dev/null +++ b/include/asm-blackfin/thread_info.h @@ -0,0 +1,143 @@ +/* + * File: include/asm-blackfin/thread_info.h + * Based on: include/asm-m68knommu/thread_info.h + * Author: LG Soft India + * Copyright (C) 2004-2005 Analog Devices Inc. + * Created: Tue Sep 21 2004 + * Description: Blackfin low-level thread information + * Modified: + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#include +#include +#include +#include + +#ifdef __KERNEL__ + +/* Thread Align Mask to reach to the top of the stack + * for any process + */ +#define ALIGN_PAGE_MASK 0xffffe000 + +#ifndef __ASSEMBLY__ + +typedef unsigned long mm_segment_t; + +/* + * low level task data. + * If you change this, change the TI_* offsets below to match. + */ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + int cpu; /* cpu we're on */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + mm_segment_t addr_limit; /* address limit */ + struct restart_block restart_block; + struct l1_scratch_task_info l1_task_info; +}; + +/* + * macros/functions for gaining access to the thread information structure + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* + * Size of kernel stack for each process. This must be a power of 2... + */ +#define THREAD_SIZE 8192 /* 2 pages */ + +/* How to get the thread information struct from C */ + +static inline struct thread_info *current_thread_info(void) + __attribute__ ((__const__)); + +/* Given a task stack pointer, you can find it's task structure + * just by masking it to the 8K boundary. + */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + __asm__("%0 = sp;": "=&d"(ti): + ); + return (struct thread_info *)((long)ti & ~8191UL); +} + +/* thread information allocation */ +#define alloc_thread_info(tsk) ((struct thread_info *) \ + __get_free_pages(GFP_KERNEL, 1)) +#define free_thread_info(ti) free_pages((unsigned long) (ti), 1) +#endif /* __ASSEMBLY__ */ + +/* + * Offsets in thread_info structure, used in assembly code + */ +#define TI_TASK 0 +#define TI_EXECDOMAIN 4 +#define TI_FLAGS 8 +#define TI_CPU 12 +#define TI_PREEMPT 16 + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_MEMDIE 5 +#define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */ +#define TIF_FREEZE 7 /* is freezing for suspend */ + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<mm) + +#include + +#endif /* _BLACKFIN_TLB_H */ diff --git a/include/asm-blackfin/tlbflush.h b/include/asm-blackfin/tlbflush.h new file mode 100644 index 0000000000..10a07ba1e0 --- /dev/null +++ b/include/asm-blackfin/tlbflush.h @@ -0,0 +1,62 @@ +#ifndef _BLACKFIN_TLBFLUSH_H +#define _BLACKFIN_TLBFLUSH_H + +/* + * Copyright (C) 2000 Lineo, David McCullough + * Copyright (C) 2000-2002, Greg Ungerer + */ + +#include + +/* + * flush all user-space atc entries. + */ +static inline void __flush_tlb(void) +{ + BUG(); +} + +static inline void __flush_tlb_one(unsigned long addr) +{ + BUG(); +} + +#define flush_tlb() __flush_tlb() + +/* + * flush all atc entries (both kernel and user-space entries). + */ +static inline void flush_tlb_all(void) +{ + BUG(); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + BUG(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long addr) +{ + BUG(); +} + +static inline void flush_tlb_range(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + BUG(); +} + +static inline void flush_tlb_kernel_page(unsigned long addr) +{ + BUG(); +} + +static inline void flush_tlb_pgtables(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + BUG(); +} + +#endif diff --git a/include/asm-blackfin/topology.h b/include/asm-blackfin/topology.h new file mode 100644 index 0000000000..acee239878 --- /dev/null +++ b/include/asm-blackfin/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_BLACKFIN_TOPOLOGY_H +#define _ASM_BLACKFIN_TOPOLOGY_H + +#include + +#endif /* _ASM_BLACKFIN_TOPOLOGY_H */ diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h new file mode 100644 index 0000000000..fe365b1b7c --- /dev/null +++ b/include/asm-blackfin/traps.h @@ -0,0 +1,75 @@ +/* + * linux/include/asm/traps.h + * + * Copyright (C) 1993 Hamish Macdonald + * + * Lineo, Inc Jul 2001 Tony Kou + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _BFIN_TRAPS_H +#define _BFIN_TRAPS_H + +#define VEC_SYS (0) +#define VEC_EXCPT01 (1) +#define VEC_EXCPT02 (2) +#define VEC_EXCPT03 (3) +#define VEC_EXCPT04 (4) +#define VEC_EXCPT05 (5) +#define VEC_EXCPT06 (6) +#define VEC_EXCPT07 (7) +#define VEC_EXCPT08 (8) +#define VEC_EXCPT09 (9) +#define VEC_EXCPT10 (10) +#define VEC_EXCPT11 (11) +#define VEC_EXCPT12 (12) +#define VEC_EXCPT13 (13) +#define VEC_EXCPT14 (14) +#define VEC_EXCPT15 (15) +#define VEC_STEP (16) +#define VEC_OVFLOW (17) +#define VEC_UNDEF_I (33) +#define VEC_ILGAL_I (34) +#define VEC_CPLB_VL (35) +#define VEC_MISALI_D (36) +#define VEC_UNCOV (37) +#define VEC_CPLB_M (38) +#define VEC_CPLB_MHIT (39) +#define VEC_WATCH (40) +#define VEC_ISTRU_VL (41) /*ADSP-BF535 only (MH) */ +#define VEC_MISALI_I (42) +#define VEC_CPLB_I_VL (43) +#define VEC_CPLB_I_M (44) +#define VEC_CPLB_I_MHIT (45) +#define VEC_ILL_RES (46) /* including unvalid supervisor mode insn */ + +#ifndef __ASSEMBLY__ + +#define HWC_x2 "System MMR Error\nAn error occurred due to an invalid access to an System MMR location\nPossible reason: a 32-bit register is accessed with a 16-bit instruction,\nor a 16-bit register is accessed with a 32-bit instruction.\n" +#define HWC_x3 "External Memory Addressing Error\n" +#define HWC_x12 "Performance Monitor Overflow\n" +#define HWC_x18 "RAISE 5 instruction\n Software issued a RAISE 5 instruction to invoke the Hardware\n" +#define HWC_default "Reserved\n" + +#define EXC_0x03 "Application stack overflow\n - Please increase the stack size of the application using elf2flt -s option,\n and/or reduce the stack use of the application.\n" +#define EXC_0x10 "Single step\n - When the processor is in single step mode, every instruction\n generates an exception. Primarily used for debugging.\n" +#define EXC_0x11 "Exception caused by a trace buffer full condition\n - The processor takes this exception when the trace\n buffer overflows (only when enabled by the Trace Unit Control register).\n" +#define EXC_0x21 "Undefined instruction\n - May be used to emulate instructions that are not defined for\n a particular processor implementation.\n" +#define EXC_0x22 "Illegal instruction combination\n - See section for multi-issue rules in the ADSP-BF53x Blackfin\n Processor Instruction Set Reference.\n" +#define EXC_0x23 "Data access CPLB protection violation\n - Attempted read or write to Supervisor resource,\n or illegal data memory access. \n" +#define EXC_0x24 "Data access misaligned address violation\n - Attempted misaligned data memory or data cache access.\n" +#define EXC_0x25 "Unrecoverable event\n - For example, an exception generated while processing a previous exception.\n" +#define EXC_0x26 "Data access CPLB miss\n - Used by the MMU to signal a CPLB miss on a data access.\n" +#define EXC_0x27 "Data access multiple CPLB hits\n - More than one CPLB entry matches data fetch address.\n" +#define EXC_0x28 "Program Sequencer Exception caused by an emulation watchpoint match\n - There is a watchpoint match, and one of the EMUSW\n bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n" +#define EXC_0x2A "Instruction fetch misaligned address violation\n - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch exception,\n the return address provided in RETX is the destination address which is misaligned, rather than the address of the offending instruction.\n" +#define EXC_0x2B "CPLB protection violation\n - Illegal instruction fetch access (memory protection violation).\n" +#define EXC_0x2C "Instruction fetch CPLB miss\n - CPLB miss on an instruction fetch.\n" +#define EXC_0x2D "Instruction fetch multiple CPLB hits\n - More than one CPLB entry matches instruction fetch address.\n" +#define EXC_0x2E "Illegal use of supervisor resource\n - Attempted to use a Supervisor register or instruction from User mode.\n Supervisor resources are registers and instructions that are reserved\n for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n only instructions.\n" + +#endif /* __ASSEMBLY__ */ +#endif /* _BFIN_TRAPS_H */ diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h new file mode 100644 index 0000000000..36f8dc8c52 --- /dev/null +++ b/include/asm-blackfin/types.h @@ -0,0 +1,66 @@ +#ifndef _BFIN_TYPES_H +#define _BFIN_TYPES_H + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +/* HK0617 -- Changes to unsigned long temporarily */ +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +#endif /* __ASSEMBLY__ */ +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; +typedef u64 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _BFIN_TYPES_H */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h new file mode 100644 index 0000000000..bfcb6794c6 --- /dev/null +++ b/include/asm-blackfin/uaccess.h @@ -0,0 +1,271 @@ +/* Changes made by Lineo Inc. May 2001 + * + * Based on: include/asm-m68knommu/uaccess.h + */ + +#ifndef __BLACKFIN_UACCESS_H +#define __BLACKFIN_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include +#include + +#include +#ifndef CONFIG_NO_ACCESS_CHECK +# include +#endif + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) + +static inline void set_fs(mm_segment_t fs) +{ + current_thread_info()->addr_limit = fs; +} + +#define segment_eq(a,b) ((a) == (b)) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) + +static inline int is_in_rom(unsigned long addr) +{ + /* + * What we are really trying to do is determine if addr is + * in an allocated kernel memory region. If not then assume + * we cannot free it or otherwise de-allocate it. Ideally + * we could restrict this to really being in a ROM or flash, + * but that would need to be done on a board by board basis, + * not globally. + */ + if ((addr < _ramstart) || (addr >= _ramend)) + return (1); + + /* Default case, not in ROM */ + return (0); +} + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + */ + +#ifdef CONFIG_NO_ACCESS_CHECK +static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; } +#else +#ifdef CONFIG_ACCESS_OK_L1 +extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text)); +#else +extern int _access_ok(unsigned long addr, unsigned long size); +#endif +#endif + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry { + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ + +#define put_user(x,p) \ + ({ \ + int _err = 0; \ + typeof(*(p)) _x = (x); \ + typeof(*(p)) *_p = (p); \ + if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\ + _err = -EFAULT; \ + } \ + else { \ + switch (sizeof (*(_p))) { \ + case 1: \ + __put_user_asm(_x, _p, B); \ + break; \ + case 2: \ + __put_user_asm(_x, _p, W); \ + break; \ + case 4: \ + __put_user_asm(_x, _p, ); \ + break; \ + case 8: { \ + long _xl, _xh; \ + _xl = ((long *)&_x)[0]; \ + _xh = ((long *)&_x)[1]; \ + __put_user_asm(_xl, ((long *)_p)+0, ); \ + __put_user_asm(_xh, ((long *)_p)+1, ); \ + } break; \ + default: \ + _err = __put_user_bad(); \ + break; \ + } \ + } \ + _err; \ + }) + +#define __put_user(x,p) put_user(x,p) +static inline int bad_user_access_length(void) +{ + panic("bad_user_access_length"); + return -1; +} + +#define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\ + __FILE__, __LINE__, __FUNCTION__),\ + bad_user_access_length(), (-EFAULT)) + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#define __ptr(x) ((unsigned long *)(x)) + +#define __put_user_asm(x,p,bhw) \ + __asm__ (#bhw"[%1] = %0;\n\t" \ + : /* no outputs */ \ + :"d" (x),"a" (__ptr(p)) : "memory") + +#define get_user(x,p) \ + ({ \ + int _err = 0; \ + typeof(*(p)) *_p = (p); \ + if (!access_ok(VERIFY_READ, _p, sizeof(*(_p)))) { \ + _err = -EFAULT; \ + } \ + else { \ + switch (sizeof(*(_p))) { \ + case 1: \ + __get_user_asm(x, _p, B,(Z)); \ + break; \ + case 2: \ + __get_user_asm(x, _p, W,(Z)); \ + break; \ + case 4: \ + __get_user_asm(x, _p, , ); \ + break; \ + case 8: { \ + unsigned long _xl, _xh; \ + __get_user_asm(_xl, ((unsigned long *)_p)+0, , ); \ + __get_user_asm(_xh, ((unsigned long *)_p)+1, , ); \ + ((unsigned long *)&x)[0] = _xl; \ + ((unsigned long *)&x)[1] = _xh; \ + } break; \ + default: \ + x = 0; \ + printk(KERN_INFO "get_user_bad: %s:%d %s\n", \ + __FILE__, __LINE__, __FUNCTION__); \ + _err = __get_user_bad(); \ + break; \ + } \ + } \ + _err; \ + }) + +#define __get_user(x,p) get_user(x,p) + +#define __get_user_bad() (bad_user_access_length(), (-EFAULT)) + +#define __get_user_asm(x,p,bhw,option) \ + { \ + unsigned long _tmp; \ + __asm__ ("%0 =" #bhw "[%1]"#option";\n\t" \ + : "=d" (_tmp) \ + : "a" (__ptr(p))); \ + (x) = (__typeof__(*(p))) _tmp; \ + } + +#define __copy_from_user(to, from, n) copy_from_user(to, from, n) +#define __copy_to_user(to, from, n) copy_to_user(to, from, n) +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n))\ + return retval; }) + +#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\ + return retval; }) + +static inline long copy_from_user(void *to, + const void __user * from, unsigned long n) +{ + if (access_ok(VERIFY_READ, from, n)) + memcpy(to, from, n); + else + return n; + return 0; +} + +static inline long copy_to_user(void *to, + const void __user * from, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + memcpy(to, from, n); + else + return n; + return 0; +} + +/* + * Copy a null terminated string from userspace. + */ + +static inline long strncpy_from_user(char *dst, + const char *src, long count) +{ + char *tmp; + if (!access_ok(VERIFY_READ, src, 1)) + return -EFAULT; + strncpy(dst, src, count); + for (tmp = dst; *tmp && count > 0; tmp++, count--) ; + return (tmp - dst); +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 on exception, a value greater than N if too long + */ +static inline long strnlen_user(const char *src, long n) +{ + return (strlen(src) + 1); +} + +#define strlen_user(str) strnlen_user(str, 32767) + +/* + * Zero Userspace + */ + +static inline unsigned long __clear_user(void *to, unsigned long n) +{ + memset(to, 0, n); + return 0; +} + +#define clear_user(to, n) __clear_user(to, n) + +#endif /* _BLACKFIN_UACCESS_H */ diff --git a/include/asm-blackfin/ucontext.h b/include/asm-blackfin/ucontext.h new file mode 100644 index 0000000000..4a4e3856be --- /dev/null +++ b/include/asm-blackfin/ucontext.h @@ -0,0 +1,17 @@ +/** Changes made by Tony Kou Lineo Inc. May 2001 + * + * Based on: include/m68knommu/ucontext.h + */ + +#ifndef _BLACKFIN_UCONTEXT_H +#define _BLACKFIN_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; /* the others are necessary */ + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _BLACKFIN_UCONTEXT_H */ diff --git a/include/asm-blackfin/unaligned.h b/include/asm-blackfin/unaligned.h new file mode 100644 index 0000000000..10081dc241 --- /dev/null +++ b/include/asm-blackfin/unaligned.h @@ -0,0 +1,6 @@ +#ifndef __BFIN_UNALIGNED_H +#define __BFIN_UNALIGNED_H + +#include + +#endif /* __BFIN_UNALIGNED_H */ diff --git a/include/asm-blackfin/unistd.h b/include/asm-blackfin/unistd.h new file mode 100644 index 0000000000..4df8790a67 --- /dev/null +++ b/include/asm-blackfin/unistd.h @@ -0,0 +1,382 @@ +#ifndef __ASM_BFIN_UNISTD_H +#define __ASM_BFIN_UNISTD_H +/* + * This file contains the system call numbers. + */ +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 + /* 7 __NR_waitpid obsolete */ +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 + /* 17 __NR_break obsolete */ + /* 18 __NR_oldstat obsolete */ +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 + /* 22 __NR_umount obsolete */ +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 + /* 28 __NR_oldfstat obsolete */ +#define __NR_pause 29 + /* 30 __NR_utime obsolete */ + /* 31 __NR_stty obsolete */ + /* 32 __NR_gtty obsolete */ +#define __NR_access 33 +#define __NR_nice 34 + /* 35 __NR_ftime obsolete */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 + /* 44 __NR_prof obsolete */ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 + /* 48 __NR_signal obsolete */ +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 + /* 53 __NR_lock obsolete */ +#define __NR_ioctl 54 +#define __NR_fcntl 55 + /* 56 __NR_mpx obsolete */ +#define __NR_setpgid 57 + /* 58 __NR_ulimit obsolete */ + /* 59 __NR_oldolduname obsolete */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 + /* 67 __NR_sigaction obsolete */ +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 + /* 72 __NR_sigsuspend obsolete */ + /* 73 __NR_sigpending obsolete */ +#define __NR_sethostname 74 +#define __NR_setrlimit 75 + /* 76 __NR_old_getrlimit obsolete */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 + /* 82 __NR_select obsolete */ +#define __NR_symlink 83 + /* 84 __NR_oldlstat obsolete */ +#define __NR_readlink 85 + /* 86 __NR_uselib obsolete */ + /* 87 __NR_swapon obsolete */ +#define __NR_reboot 88 + /* 89 __NR_readdir obsolete */ + /* 90 __NR_mmap obsolete */ +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 + /* 98 __NR_profil obsolete */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 + /* 101 __NR_ioperm */ + /* 102 __NR_socketcall obsolete */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 + /* 109 __NR_olduname obsolete */ + /* 110 __NR_iopl obsolete */ +#define __NR_vhangup 111 + /* 112 __NR_idle obsolete */ + /* 113 __NR_vm86old */ +#define __NR_wait4 114 + /* 115 __NR_swapoff obsolete */ +#define __NR_sysinfo 116 + /* 117 __NR_ipc oboslete */ +#define __NR_fsync 118 + /* 119 __NR_sigreturn obsolete */ +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 + /* 123 __NR_modify_ldt obsolete */ +#define __NR_adjtimex 124 +#define __NR_mprotect 125 + /* 126 __NR_sigprocmask obsolete */ + /* 127 __NR_create_module obsolete */ +#define __NR_init_module 128 +#define __NR_delete_module 129 + /* 130 __NR_get_kernel_syms obsolete */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 + /* 135 was sysfs */ +#define __NR_personality 136 + /* 137 __NR_afs_syscall */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 + /* 142 __NR__newselect obsolete */ +#define __NR_flock 143 + /* 144 __NR_msync obsolete */ +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 + /* 150 __NR_mlock */ + /* 151 __NR_munlock */ + /* 152 __NR_mlockall */ + /* 153 __NR_munlockall */ +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 + /* 163 __NR_mremap */ +#define __NR_setresuid 164 +#define __NR_getresuid 165 + /* 166 __NR_vm86 */ + /* 167 __NR_query_module */ + /* 168 __NR_poll */ + /* 169 __NR_nfsservctl */ +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread 180 +#define __NR_pwrite 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 + /* 188 __NR_getpmsg */ + /* 189 __NR_putpmsg */ +#define __NR_vfork 190 +#define __NR_getrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 + /* 218 __NR_mincore */ + /* 219 __NR_madvise */ +#define __NR_getdents64 220 +#define __NR_fcntl64 221 + /* 222 reserved for TUX */ + /* 223 reserved for TUX */ +#define __NR_gettid 224 + /* 225 __NR_readahead */ +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 + /* 243 __NR_set_thread_area */ + /* 244 __NR_get_thread_area */ +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 + /* 250 __NR_alloc_hugepages */ + /* 251 __NR_free_hugepages */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_bfin_spinlock 254 + +#define __NR_epoll_create 255 +#define __NR_epoll_ctl 256 +#define __NR_epoll_wait 257 + /* 258 __NR_remap_file_pages */ +#define __NR_set_tid_address 259 +#define __NR_timer_create 260 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 269 +#define __NR_fstatfs64 270 +#define __NR_tgkill 271 +#define __NR_utimes 272 +#define __NR_fadvise64_64 273 + /* 274 __NR_vserver */ + /* 275 __NR_mbind */ + /* 276 __NR_get_mempolicy */ + /* 277 __NR_set_mempolicy */ +#define __NR_mq_open 278 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) + /* 284 __NR_sys_kexec_load */ +#define __NR_waitid 285 +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 + /* 294 __NR_migrate_pages */ +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 + +/* Blackfin private syscalls */ +#define __NR_sram_alloc 311 +#define __NR_sram_free 312 +#define __NR_dma_memcpy 313 + +/* socket syscalls */ +#define __NR_accept 314 +#define __NR_bind 315 +#define __NR_connect 316 +#define __NR_getpeername 317 +#define __NR_getsockname 318 +#define __NR_getsockopt 319 +#define __NR_listen 320 +#define __NR_recv 321 +#define __NR_recvfrom 322 +#define __NR_recvmsg 323 +#define __NR_send 324 +#define __NR_sendmsg 325 +#define __NR_sendto 326 +#define __NR_setsockopt 327 +#define __NR_shutdown 328 +#define __NR_socket 329 +#define __NR_socketpair 330 + +/* sysv ipc syscalls */ +#define __NR_semctl 331 +#define __NR_semget 332 +#define __NR_semop 333 +#define __NR_msgctl 334 +#define __NR_msgget 335 +#define __NR_msgrcv 336 +#define __NR_msgsnd 337 +#define __NR_shmat 338 +#define __NR_shmctl 339 +#define __NR_shmdt 340 +#define __NR_shmget 341 + +#define __NR_syscall 342 +#define NR_syscalls __NR_syscall + +#ifdef __KERNEL__ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND +#endif + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t_" #x "\n\t.set\t_" #x ",_sys_ni_syscall"); + +#endif /* __ASM_BFIN_UNISTD_H */ diff --git a/include/asm-blackfin/user.h b/include/asm-blackfin/user.h new file mode 100644 index 0000000000..abc34629bd --- /dev/null +++ b/include/asm-blackfin/user.h @@ -0,0 +1,89 @@ +#ifndef _BFIN_USER_H +#define _BFIN_USER_H + +/* Changes by Tony Kou Lineo, Inc. July, 2001 + * + * Based include/asm-m68knommu/user.h + * + */ + +/* Core file format: The core file is written in such a way that gdb + can understand it and provide useful information to the user (under + linux we use the 'trad-core' bfd). There are quite a number of + obstacles to being able to view the contents of the floating point + registers, and until these are solved you will not be able to view the + contents of them. Actually, you can read in the core file and look at + the contents of the user struct to find out what the floating point + registers contain. + The actual file contents are as follows: + UPAGE: 1 page consisting of a user struct that tells gdb what is present + in the file. Directly after this is a copy of the task_struct, which + is currently not used by gdb, but it may come in useful at some point. + All of the registers are stored as part of the upage. The upage should + always be only one page. + DATA: The data area is stored. We use current->end_text to + current->brk to pick up all of the user variables, plus any memory + that may have been malloced. No attempt is made to determine if a page + is demand-zero or if a page is totally unused, we just cover the entire + range. All of the addresses are rounded in such a way that an integral + number of pages is written. + STACK: We need the stack information in order to get a meaningful + backtrace. We need to write the data from (esp) to + current->start_stack, so we round each of these off in order to be able + to write an integer number of pages. + The minimum core file size is 3 pages, or 12288 bytes. +*/ +struct user_bfinfp_struct { +}; + +/* This is the old layout of "struct pt_regs" as of Linux 1.x, and + is still the layout used by user (the new pt_regs doesn't have + all registers). */ +struct user_regs_struct { + long r0, r1, r2, r3, r4, r5, r6, r7; + long p0, p1, p2, p3, p4, p5, usp, fp; + long i0, i1, i2, i3; + long l0, l1, l2, l3; + long b0, b1, b2, b3; + long m0, m1, m2, m3; + long a0w, a1w; + long a0x, a1x; + unsigned long rets; + unsigned long astat; + unsigned long pc; + unsigned long orig_p0; +}; + +/* When the kernel dumps core, it starts by dumping the user struct - + this will be used by gdb to figure out where the data and stack segments + are within the file, and what virtual addresses to use. */ + +struct user { +/* We start with the registers, to mimic the way that "memory" is returned + from the ptrace(3,...) function. */ + + struct user_regs_struct regs; /* Where the registers are actually stored */ + +/* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + int reserved; /* No longer used */ + struct user_regs_struct *u_ar0; + /* Used by gdb to help find the values for */ + /* the registers. */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ +}; +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif diff --git a/include/linux/elf-em.h b/include/linux/elf-em.h index 666e0a5f00..0311bad838 100644 --- a/include/linux/elf-em.h +++ b/include/linux/elf-em.h @@ -30,6 +30,7 @@ #define EM_V850 87 /* NEC v850 */ #define EM_M32R 88 /* Renesas M32R */ #define EM_H8_300 46 /* Renesas H8/300,300H,H8S */ +#define EM_BLACKFIN 106 /* ADI Blackfin Processor */ #define EM_FRV 0x5441 /* Fujitsu FR-V */ #define EM_AVR32 0x18ad /* Atmel AVR32 */ diff --git a/include/linux/spi/ad7877.h b/include/linux/spi/ad7877.h new file mode 100644 index 0000000000..cdbed816f2 --- /dev/null +++ b/include/linux/spi/ad7877.h @@ -0,0 +1,24 @@ +/* linux/spi/ad7877.h */ + +/* Touchscreen characteristics vary between boards and models. The + * platform_data for the device's "struct device" holds this information. + * + * It's OK if the min/max values are zero. + */ +struct ad7877_platform_data { + u16 model; /* 7877 */ + u16 vref_delay_usecs; /* 0 for external vref; etc */ + u16 x_plate_ohms; + u16 y_plate_ohms; + + u16 x_min, x_max; + u16 y_min, y_max; + u16 pressure_min, pressure_max; + + u8 stopacq_polarity; /* 1 = Active HIGH, 0 = Active LOW */ + u8 first_conversion_delay; /* 0 = 0.5us, 1 = 128us, 2 = 1ms, 3 = 8ms */ + u8 acquisition_time; /* 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */ + u8 averaging; /* 0 = 1, 1 = 4, 2 = 8, 3 = 16 */ + u8 pen_down_acc_interval; /* 0 = covert once, 1 = every 0.5 ms, + 2 = ever 1 ms, 3 = every 8 ms,*/ +}; diff --git a/include/linux/usb_sl811.h b/include/linux/usb_sl811.h new file mode 100644 index 0000000000..4f2d012d73 --- /dev/null +++ b/include/linux/usb_sl811.h @@ -0,0 +1,26 @@ + +/* + * board initialization should put one of these into dev->platform_data + * and place the sl811hs onto platform_bus named "sl811-hcd". + */ + +struct sl811_platform_data { + unsigned can_wakeup:1; + + /* given port_power, msec/2 after power on till power good */ + u8 potpg; + + /* mA/2 power supplied on this port (max = default = 250) */ + u8 power; + + /* sl811 relies on an external source of VBUS current */ + void (*port_power)(struct device *dev, int is_on); + + /* pulse sl811 nRST (probably with a GPIO) */ + void (*reset)(struct device *dev); + + // some boards need something like these: + // int (*check_overcurrent)(struct device *dev); + // void (*clock_enable)(struct device *dev, int is_on); +}; + diff --git a/init/Kconfig b/init/Kconfig index 7ce9520529..ebe04f56d8 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -356,7 +356,7 @@ menuconfig EMBEDDED config UID16 bool "Enable 16-bit UID system calls" if EMBEDDED - depends on ARM || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION) + depends on ARM || BFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION) default y help This enables the legacy 16-bit UID syscall wrappers. diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index bdbf3fe14d..9a287796da 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -320,7 +320,7 @@ config DEBUG_HIGHMEM config DEBUG_BUGVERBOSE bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED depends on BUG - depends on ARM || ARM26 || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG + depends on ARM || ARM26 || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BFIN default !EMBEDDED help Say Y here to make BUG() panics output the file name and line number @@ -360,7 +360,7 @@ config DEBUG_LIST config FRAME_POINTER bool "Compile the kernel with frame pointers" - depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH) + depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BFIN) default y if DEBUG_INFO && UML help If you say Y here the resulting kernel image will be slightly larger diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c index b0381823e4..511023b430 100644 --- a/scripts/genksyms/genksyms.c +++ b/scripts/genksyms/genksyms.c @@ -516,7 +516,8 @@ int main(int argc, char **argv) genksyms_usage(); return 1; } - if ((strcmp(arch, "v850") == 0) || (strcmp(arch, "h8300") == 0)) + if ((strcmp(arch, "v850") == 0) || (strcmp(arch, "h8300") == 0) + || (strcmp(arch, "blackfin") == 0)) mod_prefix = "_"; { extern int yydebug; diff --git a/scripts/mod/mk_elfconfig.c b/scripts/mod/mk_elfconfig.c index 725d61c0fb..db3881f14c 100644 --- a/scripts/mod/mk_elfconfig.c +++ b/scripts/mod/mk_elfconfig.c @@ -55,7 +55,8 @@ main(int argc, char **argv) else exit(1); - if ((strcmp(argv[1], "v850") == 0) || (strcmp(argv[1], "h8300") == 0)) + if ((strcmp(argv[1], "v850") == 0) || (strcmp(argv[1], "h8300") == 0) + || (strcmp(argv[1], "blackfin") == 0)) printf("#define MODULE_SYMBOL_PREFIX \"_\"\n"); else printf("#define MODULE_SYMBOL_PREFIX \"\"\n"); -- 2.39.5