From 11113f84c72bd832dc4e76122e613b0e623e2346 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:02:57 +0400 Subject: [PATCH] x86: complete move ACPI from mpparse.c Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 304 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/mpparse.c | 299 +---------------------------------- 2 files changed, 305 insertions(+), 298 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6f20fa92bb..b2ad09c4c6 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -846,6 +846,310 @@ static int __init acpi_parse_madt_lapic_entries(void) #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_IO_APIC +#define MP_ISA_BUS 0 + +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) +extern int es7000_plat; +#endif + +static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_base) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +static u8 __init uniq_ioapic_id(u8 id) +{ +#ifdef CONFIG_X86_32 + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else + return id; +#else + int i; + DECLARE_BITMAP(used, 256); + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mpc_apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +#endif +} + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].mpc_type = MP_IOAPIC; + mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mpc_apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); +#ifdef CONFIG_X86_32 + mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); +#else + mp_ioapics[idx].mpc_apicver = 0; +#endif + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].gsi_base = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, + mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); + + nr_ioapics++; +} + +void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + int ioapic = -1; + int pin = -1; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mpc_irqflag = (trigger << 2) | polarity; + mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ + mp_irqs[mp_irq_entries].mpc_dstapic = + mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ + + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); + +} + +void __init mp_config_acpi_legacy_irqs(void) +{ + int i = 0; + int ioapic = -1; + +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) + /* + * Fabricate the legacy ISA bus (bus #31). + */ + mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; +#endif + set_bit(MP_ISA_BUS, mp_bus_not_pci); + Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); + +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) + /* + * Older generations of ES7000 have no legacy identity mappings + */ + if (es7000_plat == 1) + return; +#endif + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + + mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; +#ifdef CONFIG_X86_IO_APIC + mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; +#endif + /* + * Use the default configuration for the IRQs 0-15. Unless + * overridden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mpc_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mpc_srcbus == MP_ISA_BUS + && irq->mpc_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if ((irq->mpc_dstapic == + mp_irqs[mp_irq_entries].mpc_dstapic) && + (irq->mpc_dstirq == i)) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mpc_srcbusirq = i; /* Identity mapped */ + mp_irqs[mp_irq_entries].mpc_dstirq = i; + + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); + } +} + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic; + int ioapic_pin; +#ifdef CONFIG_X86_32 +#define MAX_GSI_NUM 4096 +#define IRQ_COMPRESSION_START 64 + + static int pci_irq = IRQ_COMPRESSION_START; + /* + * Mapping between Global System Interrupts, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; +#else + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; +#endif + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + +#ifdef CONFIG_X86_32 + if (ioapic_renumber_irq) + gsi = ioapic_renumber_irq(ioapic, gsi); +#endif + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + if (ioapic_pin > MP_MAX_IOAPIC_PIN) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { + Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); +#ifdef CONFIG_X86_32 + return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); +#else + return gsi; +#endif + } + + set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); +#ifdef CONFIG_X86_32 + /* + * For GSI >= 64, use IRQ compression + */ + if ((gsi >= IRQ_COMPRESSION_START) + && (triggering == ACPI_LEVEL_SENSITIVE)) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + gsi = pci_irq++; + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_gbl_FADT.sci_interrupt) + gsi = pci_irq++; + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } +#endif + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} + /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index ff1342325e..d05b70c329 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -1,5 +1,5 @@ /* -2 * Intel Multiprocessor Specification 1.1 and 1.4 + * Intel Multiprocessor Specification 1.1 and 1.4 * compliant MP-table parsing routines. * * (c) 1995 Alan Cox, Building #3 @@ -788,300 +788,3 @@ void __init find_smp_config(void) { __find_smp_config(1); } - -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -#ifdef CONFIG_X86_IO_APIC - -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) -extern int es7000_plat; -#endif - -#define MP_ISA_BUS 0 - -static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -static u8 __init uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); -#ifdef CONFIG_X86_32 - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); -#else - mp_ioapics[idx].mpc_apicver = 0; -#endif - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - -void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ - - MP_intsrc_info(&intsrc); -} - -void __init mp_config_acpi_legacy_irqs(void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; - -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) - /* - * Fabricate the legacy ISA bus (bus #31). - */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; -#endif - set_bit(MP_ISA_BUS, mp_bus_not_pci); - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); - -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; -#endif - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; -#ifdef CONFIG_X86_IO_APIC - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; -#endif - /* - * Use the default configuration for the IRQs 0-15. Unless - * overridden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS - && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - MP_intsrc_info(&intsrc); - } -} - -int mp_register_gsi(u32 gsi, int triggering, int polarity) -{ - int ioapic; - int ioapic_pin; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 - - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; -#endif - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - -#ifdef CONFIG_X86_32 - if (ioapic_renumber_irq) - gsi = ioapic_renumber_irq(ioapic, gsi); -#endif - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - if (ioapic_pin > MP_MAX_IOAPIC_PIN) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; - } - if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else - return gsi; -#endif - } - - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); -#ifdef CONFIG_X86_32 - /* - * For GSI >= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} - -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ -- 2.39.5