From 0e302a704420afe40808fbd4ba149624c4350f31 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 21 Jun 2007 11:32:38 -0500 Subject: [PATCH] [POWERPC] 52xx: Remove support for PCI bus_offset The hose->bus_offset is only used for PCI config cycles and the 52xx PCI config code doesn't actually ever set bus_offset to a non-zero value. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/52xx/mpc52xx_pci.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index 51164c851c..57ca2feb07 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -117,13 +117,13 @@ mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, out_be32(hose->cfg_addr, (1 << 31) | - ((bus->number - hose->bus_offset) << 16) | + (bus->number << 16) | (devfn << 8) | (offset & 0xfc)); mb(); #if defined(CONFIG_PPC_MPC5200_BUGFIX) - if (bus->number != hose->bus_offset) { + if (bus->number) { /* workaround for the bug 435 of the MPC5200 (L25R); * Don't do 32 bits config access during type-1 cycles */ switch (len) { @@ -174,13 +174,13 @@ mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, out_be32(hose->cfg_addr, (1 << 31) | - ((bus->number - hose->bus_offset) << 16) | + (bus->number << 16) | (devfn << 8) | (offset & 0xfc)); mb(); #if defined(CONFIG_PPC_MPC5200_BUGFIX) - if (bus->number != hose->bus_offset) { + if (bus->number) { /* workaround for the bug 435 of the MPC5200 (L25R); * Don't do 32 bits config access during type-1 cycles */ switch (len) { @@ -394,7 +394,6 @@ mpc52xx_add_bridge(struct device_node *node) hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - hose->bus_offset = 0; hose->ops = &mpc52xx_pci_ops; pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1); -- 2.39.5