From 0b0ef2ea00c581d613e15eadc3215d52a6a55946 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 28 Jul 2007 14:20:16 +0100 Subject: [PATCH] [MIPS] Remove Momentum Ocelot support. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 18 - arch/mips/Makefile | 11 - arch/mips/configs/atlas_defconfig | 2 - arch/mips/configs/bigsur_defconfig | 2 - arch/mips/configs/capcella_defconfig | 2 - arch/mips/configs/cobalt_defconfig | 1 - arch/mips/configs/db1000_defconfig | 2 - arch/mips/configs/db1100_defconfig | 2 - arch/mips/configs/db1200_defconfig | 2 - arch/mips/configs/db1500_defconfig | 2 - arch/mips/configs/db1550_defconfig | 2 - arch/mips/configs/ddb5477_defconfig | 2 - arch/mips/configs/decstation_defconfig | 2 - arch/mips/configs/e55_defconfig | 2 - arch/mips/configs/emma2rh_defconfig | 2 - arch/mips/configs/excite_defconfig | 2 - arch/mips/configs/fulong_defconfig | 1 - arch/mips/configs/ip22_defconfig | 2 - arch/mips/configs/ip27_defconfig | 2 - arch/mips/configs/ip32_defconfig | 2 - arch/mips/configs/jazz_defconfig | 2 - arch/mips/configs/jmr3927_defconfig | 2 - arch/mips/configs/malta_defconfig | 2 - arch/mips/configs/mipssim_defconfig | 2 - arch/mips/configs/mpc30x_defconfig | 2 - arch/mips/configs/msp71xx_defconfig | 2 - arch/mips/configs/ocelot_defconfig | 919 ------------------ arch/mips/configs/pb1100_defconfig | 2 - arch/mips/configs/pb1500_defconfig | 2 - arch/mips/configs/pb1550_defconfig | 2 - arch/mips/configs/pnx8550-jbs_defconfig | 2 - arch/mips/configs/pnx8550-stb810_defconfig | 2 - arch/mips/configs/qemu_defconfig | 2 - arch/mips/configs/rbhma4200_defconfig | 1 - arch/mips/configs/rbhma4500_defconfig | 1 - arch/mips/configs/rm200_defconfig | 2 - arch/mips/configs/sb1250-swarm_defconfig | 2 - arch/mips/configs/sead_defconfig | 2 - arch/mips/configs/tb0219_defconfig | 2 - arch/mips/configs/tb0226_defconfig | 2 - arch/mips/configs/tb0287_defconfig | 2 - arch/mips/configs/workpad_defconfig | 2 - arch/mips/configs/wrppmc_defconfig | 2 - arch/mips/configs/yosemite_defconfig | 2 - arch/mips/defconfig | 2 - arch/mips/gt64120/momenco_ocelot/Makefile | 7 - arch/mips/gt64120/momenco_ocelot/dbg_io.c | 121 --- arch/mips/gt64120/momenco_ocelot/irq.c | 95 -- .../gt64120/momenco_ocelot/ocelot-platform.c | 46 - arch/mips/gt64120/momenco_ocelot/ocelot_pld.h | 30 - arch/mips/gt64120/momenco_ocelot/prom.c | 71 -- arch/mips/gt64120/momenco_ocelot/reset.c | 47 - arch/mips/gt64120/momenco_ocelot/setup.c | 365 ------- arch/mips/pci/Makefile | 1 - arch/mips/pci/fixup-ocelot.c | 75 -- arch/mips/pci/pci-ocelot.c | 107 -- drivers/mtd/devices/docprobe.c | 3 - drivers/mtd/nand/diskonchip.c | 3 - include/asm-mips/war.h | 5 +- 59 files changed, 2 insertions(+), 2002 deletions(-) delete mode 100644 arch/mips/configs/ocelot_defconfig delete mode 100644 arch/mips/gt64120/momenco_ocelot/Makefile delete mode 100644 arch/mips/gt64120/momenco_ocelot/dbg_io.c delete mode 100644 arch/mips/gt64120/momenco_ocelot/irq.c delete mode 100644 arch/mips/gt64120/momenco_ocelot/ocelot-platform.c delete mode 100644 arch/mips/gt64120/momenco_ocelot/ocelot_pld.h delete mode 100644 arch/mips/gt64120/momenco_ocelot/prom.c delete mode 100644 arch/mips/gt64120/momenco_ocelot/reset.c delete mode 100644 arch/mips/gt64120/momenco_ocelot/setup.c delete mode 100644 arch/mips/pci/fixup-ocelot.c delete mode 100644 arch/mips/pci/pci-ocelot.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3513e22683..1d9a65e4c5 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -227,24 +227,6 @@ config MIPS_SIM This option enables support for MIPS Technologies MIPSsim software emulator. -config MOMENCO_OCELOT - bool "Momentum Ocelot board" - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select PCI_GT64XXX_PCI0 - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_RM7000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - help - The Ocelot is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer . - config DDB5477 bool "NEC DDB Vrc-5477" select DDB5XXX_COMMON diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 6ac8bdae61..2bd0a86e2f 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -336,17 +336,6 @@ core-$(CONFIG_MIPS_SIM) += arch/mips/mipssim/ cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-mipssim load-$(CONFIG_MIPS_SIM) += 0x80100000 -# -# Momentum Ocelot board -# -# The Ocelot setup.o must be linked early - it does the ioremap() for the -# mips_io_port_base. -# -core-$(CONFIG_MOMENCO_OCELOT) += arch/mips/gt64120/common/ \ - arch/mips/gt64120/momenco_ocelot/ -cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot -load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000 - # # PMC-Sierra MSP SOCs # diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 129e2c961f..28d36961f0 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -32,8 +32,6 @@ CONFIG_MIPS_ATLAS=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index dc3e1bf4e4..98dd3196b7 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 4c7031222e..5ffbd3885c 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index c8c05785a8..410b441c5c 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -18,7 +18,6 @@ CONFIG_MIPS_COBALT=y # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_OCELOT is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index ec60beb888..7c515d7e18 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -33,8 +33,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index f3c25f08bf..9460d6587a 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -33,8 +33,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 6d400befba..dc3985fadb 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -33,8 +33,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 82aea6e088..d569317622 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -33,8 +33,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 82697714a9..2348486cc4 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -33,8 +33,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index a42ab9ae7d..90123c69c1 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index d6e3fffbc8..37d3bc5fdb 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -32,8 +32,6 @@ CONFIG_MACH_DECSTATION=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 78f5004fb7..629737830d 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index b29bff0f56..ec54880a2e 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 69810592aa..801f5ac8b8 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -33,8 +33,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig index 6ab94d8cf0..feacaf0737 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fulong_defconfig @@ -19,7 +19,6 @@ CONFIG_LEMOTE_FULONG=y # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_OCELOT is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 405c9f505a..5d2d29a0e0 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index a9dcbcf563..82131929cd 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index a040459bec..849f9c932b 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index 8a0b4ac528..49487493eb 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -32,8 +32,6 @@ CONFIG_MACH_JAZZ=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 9a25e770ab..1e6d3cb6cd 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 546cb243fd..b17eb6f337 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -32,8 +32,6 @@ CONFIG_MIPS_MALTA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 6abad6f883..2d94569f05 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set CONFIG_MIPS_SIM=y # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 4981ce425d..090eb2fa05 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index adca5f7ba5..7296f0c8b1 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig deleted file mode 100644 index e1db1fb80c..0000000000 --- a/arch/mips/configs/ocelot_defconfig +++ /dev/null @@ -1,919 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:36 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -CONFIG_MOMENCO_OCELOT=y -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_DDB5477 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_CPU_RM7K=y -CONFIG_MIPS_GT64120=y -CONFIG_SWAP_IO_SPACE=y -# CONFIG_SYSCLK_75 is not set -# CONFIG_SYSCLK_83 is not set -CONFIG_SYSCLK_100=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -CONFIG_CPU_RM7000=y -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_RM7000=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_RM7000_CPU_SCACHE=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -# CONFIG_PCI is not set -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=y -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=y -CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_SOFTMAC=y -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=y -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=y - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=y -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=y -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=y -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=y -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_WP512=y -CONFIG_CRYPTO_TGR192=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_LRW=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=y -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_SERPENT=y -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_CAST5=y -CONFIG_CRYPTO_CAST6=y -CONFIG_CRYPTO_TEA=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_KHAZAD=y -CONFIG_CRYPTO_ANUBIS=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CAMELLIA=y - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=y -CONFIG_CRC32=y -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 0028aef0af..cb4ad4f87e 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -33,8 +33,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 8a1d588873..0d2c945ac8 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -33,8 +33,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 5581ad2ca4..2d7df49d19 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -33,8 +33,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 821c1cee56..18996ed7be 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set CONFIG_PNX8550_JBS=y # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 0e8bd92b38..9bbc09e5b8 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set CONFIG_PNX8550_STB810=y diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index 703de002e3..5df7cc3ba0 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index 20a38526d4..3da9903532 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -30,7 +30,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_OCELOT is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 5dbb250f71..badf679e3f 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -20,7 +20,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_OCELOT is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index a5dc5cb97a..091f41d13d 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 98a9140922..21cc7eaae5 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 69c08b24c8..1f01228777 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -32,8 +32,6 @@ CONFIG_MIPS_SEAD=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 5d4fc0e4f7..9b2fe199db 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index 1b92b48de0..3e9f41d98a 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 5b77c7a5d8..94511f9dc8 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index 94a4f94a8b..0fcb6e52c3 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index e38bd9b0ea..f58418c5f1 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y CONFIG_WR_PPMC=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index f342d8c887..850d4e8570 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/defconfig b/arch/mips/defconfig index b3b6e58058..fee0f9f948 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -32,8 +32,6 @@ CONFIG_ZONE_DMA=y # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile deleted file mode 100644 index 1df5fe23c6..0000000000 --- a/arch/mips/gt64120/momenco_ocelot/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for Momentum's Ocelot board. -# - -obj-y += irq.o ocelot-platform.o prom.o reset.o setup.o - -obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c deleted file mode 100644 index 32d6fb4ee6..0000000000 --- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c +++ /dev/null @@ -1,121 +0,0 @@ - -#include /* For the serial port location and base baud */ - -/* --- CONFIG --- */ - -typedef unsigned char uint8; -typedef unsigned int uint32; - -/* --- END OF CONFIG --- */ - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -/* ----------------------------------------------------- */ - -/* === CONFIG === */ - -/* [jsun] we use the second serial port for kdb */ -#define BASE OCELOT_SERIAL1_BASE -#define MAX_BAUD OCELOT_BASE_BAUD - -/* === END OF CONFIG === */ - -#define REG_OFFSET 4 - -/* register offset */ -#define OFS_RCV_BUFFER 0 -#define OFS_TRANS_HOLD 0 -#define OFS_SEND_BUFFER 0 -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint8*)(BASE + y))) -#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z) - -void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up baud rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized = 0; - -uint8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_38400, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -int putDebugChar(uint8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_38400, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); - return 1; -} diff --git a/arch/mips/gt64120/momenco_ocelot/irq.c b/arch/mips/gt64120/momenco_ocelot/irq.c deleted file mode 100644 index 2585d9dbda..0000000000 --- a/arch/mips/gt64120/momenco_ocelot/irq.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2000, 2001, 2003 Ralf Baechle (ralf@gnu.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause(); - - if (pending & STATUSF_IP2) /* int0 hardware line */ - do_IRQ(2); - else if (pending & STATUSF_IP3) /* int1 hardware line */ - do_IRQ(3); - else if (pending & STATUSF_IP4) /* int2 hardware line */ - do_IRQ(4); - else if (pending & STATUSF_IP5) /* int3 hardware line */ - do_IRQ(5); - else if (pending & STATUSF_IP6) /* int4 hardware line */ - do_IRQ(6); - else if (pending & STATUSF_IP7) /* cpu timer */ - do_IRQ(7); - else { - /* - * Now look at the extended interrupts - */ - pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; - - if (pending & STATUSF_IP8) /* int6 hardware line */ - do_IRQ(8); - else if (pending & STATUSF_IP9) /* int7 hardware line */ - do_IRQ(9); - else if (pending & STATUSF_IP10) /* int8 hardware line */ - do_IRQ(10); - else if (pending & STATUSF_IP11) /* int9 hardware line */ - do_IRQ(11); - } -} - -void __init arch_init_irq(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM); - local_irq_disable(); - - mips_cpu_irq_init(); - rm7k_cpu_irq_init(); -} diff --git a/arch/mips/gt64120/momenco_ocelot/ocelot-platform.c b/arch/mips/gt64120/momenco_ocelot/ocelot-platform.c deleted file mode 100644 index 81d9031a5a..0000000000 --- a/arch/mips/gt64120/momenco_ocelot/ocelot-platform.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * A NS16552 DUART with a 20MHz crystal. - * - */ -#include -#include -#include - -#define OCELOT_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) - -static struct plat_serial8250_port uart8250_data[] = { - { - .mapbase = 0xe0001020, - .irq = 4, - .uartclk = 20000000, - .iotype = UPIO_MEM, - .flags = OCELOT_UART_FLAGS, - .regshift = 2, - }, - { }, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = uart8250_data, - }, -}; - -static int __init uart8250_init(void) -{ - return platform_device_register(&uart8250_device); -} - -module_init(uart8250_init); - -MODULE_AUTHOR("Ralf Baechle "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("8250 UART probe driver for the Momenco Ocelot"); diff --git a/arch/mips/gt64120/momenco_ocelot/ocelot_pld.h b/arch/mips/gt64120/momenco_ocelot/ocelot_pld.h deleted file mode 100644 index 11f02c402b..0000000000 --- a/arch/mips/gt64120/momenco_ocelot/ocelot_pld.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Ocelot Board Register Definitions - * - * (C) 2001 Red Hat, Inc. - * - * GPL'd - */ -#ifndef __MOMENCO_OCELOT_PLD_H__ -#define __MOMENCO_OCELOT_PLD_H__ - -#define OCELOT_CS0_ADDR (0xe0020000) - -#define OCELOT_REG_BOARDREV (0) -#define OCELOT_REG_PLD1_ID (1) -#define OCELOT_REG_PLD2_ID (2) -#define OCELOT_REG_RESET_STATUS (3) -#define OCELOT_REG_BOARD_STATUS (4) -#define OCELOT_REG_CPCI_ID (5) -#define OCELOT_REG_I2C_CTRL (8) -#define OCELOT_REG_EEPROM_MODE (9) -#define OCELOT_REG_INTMASK (10) -#define OCELOT_REG_INTSTATUS (11) -#define OCELOT_REG_INTSET (12) -#define OCELOT_REG_INTCLR (13) - -#define OCELOT_PLD_WRITE(x, y) writeb(x, OCELOT_CS0_ADDR + OCELOT_REG_##y) -#define OCELOT_PLD_READ(x) readb(OCELOT_CS0_ADDR + OCELOT_REG_##x) - - -#endif /* __MOMENCO_OCELOT_PLD_H__ */ diff --git a/arch/mips/gt64120/momenco_ocelot/prom.c b/arch/mips/gt64120/momenco_ocelot/prom.c deleted file mode 100644 index c71c85276c..0000000000 --- a/arch/mips/gt64120/momenco_ocelot/prom.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include - -#include -#include -#include - -struct callvectors* debug_vectors; - -extern unsigned long gt64120_base; - -const char *get_system_type(void) -{ - return "Momentum Ocelot"; -} - -/* [jsun@junsun.net] PMON passes arguments in C main() style */ -void __init prom_init(void) -{ - int argc = fw_arg0; - char **arg = (char **) fw_arg1; - char **env = (char **) fw_arg2; - struct callvectors *cv = (struct callvectors *) fw_arg3; - int i; - - /* save the PROM vectors for debugging use */ - debug_vectors = cv; - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, arg[i]); - strcat(arcs_cmdline, " "); - } - - mips_machgroup = MACH_GROUP_MOMENCO; - mips_machtype = MACH_MOMENCO_OCELOT; - - while (*env) { - if (strncmp("gtbase", *env, 6) == 0) { - gt64120_base = simple_strtol(*env + strlen("gtbase="), - NULL, 16); - break; - } - *env++; - } - - debug_vectors->printf("Booting Linux kernel...\n"); - - /* All the boards have at least 64MiB. If there's more, we - detect and register it later */ - add_memory_region(0, 64 << 20, BOOT_MEM_RAM); -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/gt64120/momenco_ocelot/reset.c b/arch/mips/gt64120/momenco_ocelot/reset.c deleted file mode 100644 index 3fd499adf4..0000000000 --- a/arch/mips/gt64120/momenco_ocelot/reset.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 1997, 2001 Ralf Baechle - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - */ -#include -#include -#include -#include -#include -#include -#include -#include - -void momenco_ocelot_restart(char *command) -{ - void *nvram = ioremap_nocache(0x2c807000, 0x1000); - - if (!nvram) { - printk(KERN_NOTICE "ioremap of reset register failed\n"); - return; - } - writeb(0x84, nvram + 0xff7); /* Ask the NVRAM/RTC/watchdog chip to - assert reset in 1/16 second */ - mdelay(10+(1000/16)); - iounmap(nvram); - printk(KERN_NOTICE "Watchdog reset failed\n"); -} - -void momenco_ocelot_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void momenco_ocelot_power_off(void) -{ - momenco_ocelot_halt(); -} diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c deleted file mode 100644 index 98b6fb3809..0000000000 --- a/arch/mips/gt64120/momenco_ocelot/setup.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * setup.c - * - * BRIEF MODULE DESCRIPTION - * Momentum Computer Ocelot (CP7000) - board dependent boot routines - * - * Copyright (C) 1996, 1997, 2001, 06 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2000 RidgeRun, Inc. - * Copyright (C) 2001 Red Hat, Inc. - * Copyright (C) 2002 Momentum Computer - * - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "ocelot_pld.h" - -unsigned long gt64120_base = KSEG1ADDR(GT_DEF_BASE); - -/* These functions are used for rebooting or halting the machine*/ -extern void momenco_ocelot_restart(char *command); -extern void momenco_ocelot_halt(void); -extern void momenco_ocelot_power_off(void); - -extern void momenco_ocelot_irq_setup(void); - -static char reset_reason; - -#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> PAGE_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6)|1) - -static void __init setup_l3cache(unsigned long size); - -/* setup code for a handoff from a version 1 PMON 2000 PROM */ -static void PMON_v1_setup(void) -{ - /* A wired TLB entry for the GT64120A and the serial port. The - GT64120A is going to be hit on every IRQ anyway - there's - absolutely no point in letting it be a random TLB entry, as - it'll just cause needless churning of the TLB. And we use - the other half for the serial port, which is just a PITA - otherwise :) - - Device Physical Virtual - GT64120 Internal Regs 0x24000000 0xe0000000 - UARTs (CS2) 0x2d000000 0xe0001000 - */ - add_wired_entry(ENTRYLO(0x24000000), ENTRYLO(0x2D000000), 0xe0000000, PM_4K); - - /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM - in the CS[012] region. We can't use ioremap() yet. The NVRAM - is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions. - - Ocelot PLD (CS0) 0x2c000000 0xe0020000 - NVRAM 0x2c800000 0xe0030000 - */ - - add_temporary_entry(ENTRYLO(0x2C000000), ENTRYLO(0x2d000000), 0xe0020000, PM_64K); - - /* Relocate the CS3/BootCS region */ - GT_WRITE(GT_CS3BOOTLD_OFS, 0x2f000000 >> 21); - - /* Relocate CS[012] */ - GT_WRITE(GT_CS20LD_OFS, 0x2c000000 >> 21); - - /* Relocate the GT64120A itself... */ - GT_WRITE(GT_ISD_OFS, 0x24000000 >> 21); - mb(); - gt64120_base = 0xe0000000; - - /* ...and the PCI0 view of it. */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000020); - GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000000); - GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000024); - GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000001); -} - -/* setup code for a handoff from a version 2 PMON 2000 PROM */ -void PMON_v2_setup() -{ - /* A wired TLB entry for the GT64120A and the serial port. The - GT64120A is going to be hit on every IRQ anyway - there's - absolutely no point in letting it be a random TLB entry, as - it'll just cause needless churning of the TLB. And we use - the other half for the serial port, which is just a PITA - otherwise :) - - Device Physical Virtual - GT64120 Internal Regs 0xf4000000 0xe0000000 - UARTs (CS2) 0xfd000000 0xe0001000 - */ - add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xfD000000), 0xe0000000, PM_4K); - - /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM - in the CS[012] region. We can't use ioremap() yet. The NVRAM - is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions. - - Ocelot PLD (CS0) 0xfc000000 0xe0020000 - NVRAM 0xfc800000 0xe0030000 - */ - add_temporary_entry(ENTRYLO(0xfC000000), ENTRYLO(0xfd000000), 0xe0020000, PM_64K); - - gt64120_base = 0xe0000000; -} - -void __init plat_mem_setup(void) -{ - void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache); - unsigned int tmpword; - - _machine_restart = momenco_ocelot_restart; - _machine_halt = momenco_ocelot_halt; - pm_power_off = momenco_ocelot_power_off; - - /* - * initrd_start = (unsigned long)ocelot_initrd_start; - * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size; - * initrd_below_start_ok = 1; - */ - - /* do handoff reconfiguration */ - if (gt64120_base == KSEG1ADDR(GT_DEF_BASE)) - PMON_v1_setup(); - else - PMON_v2_setup(); - - /* Turn off the Bit-Error LED */ - OCELOT_PLD_WRITE(0x80, INTCLR); - - /* Relocate all the PCI1 stuff, not that we use it */ - GT_WRITE(GT_PCI1IOLD_OFS, 0x30000000 >> 21); - GT_WRITE(GT_PCI1M0LD_OFS, 0x32000000 >> 21); - GT_WRITE(GT_PCI1M1LD_OFS, 0x34000000 >> 21); - - /* Relocate PCI0 I/O and Mem0 */ - GT_WRITE(GT_PCI0IOLD_OFS, 0x20000000 >> 21); - GT_WRITE(GT_PCI0M0LD_OFS, 0x22000000 >> 21); - - /* Relocate PCI0 Mem1 */ - GT_WRITE(GT_PCI0M1LD_OFS, 0x36000000 >> 21); - - /* For the initial programming, we assume 512MB configuration */ - /* Relocate the CPU's view of the RAM... */ - GT_WRITE(GT_SCS10LD_OFS, 0); - GT_WRITE(GT_SCS10HD_OFS, 0x0fe00000 >> 21); - GT_WRITE(GT_SCS32LD_OFS, 0x10000000 >> 21); - GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21); - - GT_WRITE(GT_SCS1LD_OFS, 0xff); - GT_WRITE(GT_SCS1HD_OFS, 0x00); - GT_WRITE(GT_SCS0LD_OFS, 0); - GT_WRITE(GT_SCS0HD_OFS, 0xff); - GT_WRITE(GT_SCS3LD_OFS, 0xff); - GT_WRITE(GT_SCS3HD_OFS, 0x00); - GT_WRITE(GT_SCS2LD_OFS, 0); - GT_WRITE(GT_SCS2HD_OFS, 0xff); - - /* ...and the PCI0 view of it. */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000010); - GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x00000000); - GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014); - GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x10000000); - GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000); - GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000); - - tmpword = OCELOT_PLD_READ(BOARDREV); - if (tmpword < 26) - printk("Momenco Ocelot: Board Assembly Rev. %c\n", 'A'+tmpword); - else - printk("Momenco Ocelot: Board Assembly Revision #0x%x\n", tmpword); - - tmpword = OCELOT_PLD_READ(PLD1_ID); - printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15); - tmpword = OCELOT_PLD_READ(PLD2_ID); - printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15); - tmpword = OCELOT_PLD_READ(RESET_STATUS); - printk("Reset reason: 0x%x\n", tmpword); - reset_reason = tmpword; - OCELOT_PLD_WRITE(0xff, RESET_STATUS); - - tmpword = OCELOT_PLD_READ(BOARD_STATUS); - printk("Board Status register: 0x%02x\n", tmpword); - printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); - printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); - printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not"); - printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1); - printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3))); - - if (tmpword&12) - l3func((1<<(((tmpword&12) >> 2)+20))); - - switch(tmpword &3) { - case 3: - /* 512MiB */ - /* Decoders are allready set -- just add the - * appropriate region */ - add_memory_region( 0x40<<20, 0xC0<<20, BOOT_MEM_RAM); - add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM); - break; - case 2: - /* 256MiB -- two banks of 128MiB */ - GT_WRITE(GT_SCS10HD_OFS, 0x07e00000 >> 21); - GT_WRITE(GT_SCS32LD_OFS, 0x08000000 >> 21); - GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21); - - GT_WRITE(GT_SCS0HD_OFS, 0x7f); - GT_WRITE(GT_SCS2LD_OFS, 0x80); - GT_WRITE(GT_SCS2HD_OFS, 0xff); - - /* reconfigure the PCI0 interface view of memory */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014); - GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x08000000); - GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000); - GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000); - - add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM); - add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM); - break; - case 1: - /* 128MiB -- 64MiB per bank */ - GT_WRITE(GT_SCS10HD_OFS, 0x03e00000 >> 21); - GT_WRITE(GT_SCS32LD_OFS, 0x04000000 >> 21); - GT_WRITE(GT_SCS32HD_OFS, 0x07e00000 >> 21); - - GT_WRITE(GT_SCS0HD_OFS, 0x3f); - GT_WRITE(GT_SCS2LD_OFS, 0x40); - GT_WRITE(GT_SCS2HD_OFS, 0x7f); - - /* reconfigure the PCI0 interface view of memory */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014); - GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000); - GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x03fff000); - GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x03fff000); - - /* add the appropriate region */ - add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM); - break; - case 0: - /* 64MiB */ - GT_WRITE(GT_SCS10HD_OFS, 0x01e00000 >> 21); - GT_WRITE(GT_SCS32LD_OFS, 0x02000000 >> 21); - GT_WRITE(GT_SCS32HD_OFS, 0x03e00000 >> 21); - - GT_WRITE(GT_SCS0HD_OFS, 0x1f); - GT_WRITE(GT_SCS2LD_OFS, 0x20); - GT_WRITE(GT_SCS2HD_OFS, 0x3f); - - /* reconfigure the PCI0 interface view of memory */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014); - GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000); - GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x01fff000); - GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x01fff000); - - break; - } - - /* Fix up the DiskOnChip mapping */ - GT_WRITE(GT_DEV_B3_OFS, 0xfef73); -} - -extern int rm7k_tcache_enabled; -/* - * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache() - */ -#define Page_Invalidate_T 0x16 -static void __init setup_l3cache(unsigned long size) -{ - int register i; - unsigned long tmp; - - printk("Enabling L3 cache..."); - - /* Enable the L3 cache in the GT64120A's CPU Configuration register */ - tmp = GT_READ(GT_CPU_OFS); - GT_WRITE(GT_CPU_OFS, tmp | (1<<14)); - - /* Enable the L3 cache in the CPU */ - set_c0_config(1<<12 /* CONF_TE */); - - /* Clear the cache */ - write_c0_taglo(0); - write_c0_taghi(0); - - for (i=0; i < size; i+= 4096) { - __asm__ __volatile__ ( - ".set noreorder\n\t" - ".set mips3\n\t" - "cache %1, (%0)\n\t" - ".set mips0\n\t" - ".set reorder" - : - : "r" (KSEG0ADDR(i)), - "i" (Page_Invalidate_T)); - } - - /* Let the RM7000 MM code know that the tertiary cache is enabled */ - rm7k_tcache_enabled = 1; - - printk("Done\n"); -} - - -/* This needs to be one of the first initcalls, because no I/O port access - can work before this */ - -static int io_base_ioremap(void) -{ - void *io_remap_range = ioremap(GT_PCI_IO_BASE, GT_PCI_IO_SIZE); - - if (!io_remap_range) { - panic("Could not ioremap I/O port range"); - } - set_io_port_base(io_remap_range - GT_PCI_IO_BASE); - - return 0; -} - -module_init(io_base_ioremap); diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c58bd3d036..8be9f2b9db 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o obj-$(CONFIG_LEMOTE_FULONG) += fixup-lm2e.o ops-bonito64.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o -obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o diff --git a/arch/mips/pci/fixup-ocelot.c b/arch/mips/pci/fixup-ocelot.c deleted file mode 100644 index 99629bd047..0000000000 --- a/arch/mips/pci/fixup-ocelot.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * arch/mips/gt64120/momenco_ocelot/pci.c - * Board-specific PCI routines for gt64120 controller. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include - - -void __devinit pcibios_fixup_bus(struct pci_bus *bus) -{ - struct pci_bus *current_bus = bus; - struct pci_dev *devices; - struct list_head *devices_link; - u16 cmd; - - list_for_each(devices_link, &(current_bus->devices)) { - - devices = pci_dev_b(devices_link); - if (devices == NULL) - continue; - - if (PCI_SLOT(devices->devfn) == 1) { - /* - * Slot 1 is primary ether port, i82559 - * we double-check against that assumption - */ - if ((devices->vendor != 0x8086) || - (devices->device != 0x1209)) { - panic("pcibios_fixup_bus: found " - "unexpected PCI device in slot 1."); - } - devices->irq = 2; /* irq_nr is 2 for INT0 */ - } else if (PCI_SLOT(devices->devfn) == 2) { - /* - * Slot 2 is secondary ether port, i21143 - * we double-check against that assumption - */ - if ((devices->vendor != 0x1011) || - (devices->device != 0x19)) { - panic("galileo_pcibios_fixup_bus: " - "found unexpected PCI device in slot 2."); - } - devices->irq = 3; /* irq_nr is 3 for INT1 */ - } else if (PCI_SLOT(devices->devfn) == 4) { - /* PMC Slot 1 */ - devices->irq = 8; /* irq_nr is 8 for INT6 */ - } else if (PCI_SLOT(devices->devfn) == 5) { - /* PMC Slot 1 */ - devices->irq = 9; /* irq_nr is 9 for INT7 */ - } else { - /* We don't have assign interrupts for other devices. */ - devices->irq = 0xff; - } - - /* Assign an interrupt number for the device */ - bus->ops->write_byte(devices, PCI_INTERRUPT_LINE, - devices->irq); - - /* enable master */ - bus->ops->read_word(devices, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER; - bus->ops->write_word(devices, PCI_COMMAND, cmd); - } -} diff --git a/arch/mips/pci/pci-ocelot.c b/arch/mips/pci/pci-ocelot.c deleted file mode 100644 index 1421d34535..0000000000 --- a/arch/mips/pci/pci-ocelot.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Galileo Evaluation Boards PCI support. - * - * The general-purpose functions to read/write and configure the GT64120A's - * PCI registers (function names start with pci0 or pci1) are either direct - * copies of functions written by Galileo Technology, or are modifications - * of their functions to work with Linux 2.4 vs Linux 2.2. These functions - * are Copyright - Galileo Technology. - * - * Other functions are derived from other MIPS PCI implementations, or were - * written by RidgeRun, Inc, Copyright (C) 2000 RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static inline unsigned int pci0ReadConfigReg(unsigned int offset) -{ - unsigned int DataForRegCf8; - unsigned int data; - - DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) | - (PCI_FUNC(device->devfn) << 8) | - (offset & ~0x3)) | 0x80000000; - GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8); - GT_READ(GT_PCI0_CFGDATA_OFS, &data); - - return data; -} - -static inline void pci0WriteConfigReg(unsigned int offset, unsigned int data) -{ - unsigned int DataForRegCf8; - - DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) | - (PCI_FUNC(device->devfn) << 8) | - (offset & ~0x3)) | 0x80000000; - GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8); - GT_WRITE(GT_PCI0_CFGDATA_OFS, data); -} - -static struct resource ocelot_mem_resource = { - .start = GT_PCI_MEM_BASE, - .end = GT_PCI_MEM_BASE + GT_PCI_MEM_BASE - 1, -}; - -static struct resource ocelot_io_resource = { - .start = GT_PCI_IO_BASE, - .end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1, -}; - -static struct pci_controller ocelot_pci_controller = { - .pci_ops = gt64xxx_pci0_ops, - .mem_resource = &ocelot_mem_resource, - .io_resource = &ocelot_io_resource, -}; - -static int __init ocelot_pcibios_init(void) -{ - u32 tmp; - - GT_READ(GT_PCI0_CMD_OFS, &tmp); - GT_READ(GT_PCI0_BARE_OFS, &tmp); - - /* - * You have to enable bus mastering to configure any other - * card on the bus. - */ - tmp = pci0ReadConfigReg(PCI_COMMAND); - tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR; - pci0WriteConfigReg(PCI_COMMAND, tmp); - - register_pci_controller(&ocelot_pci_controller); -} - -arch_initcall(ocelot_pcibios_init); diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c index b96ac8e119..54aa759076 100644 --- a/drivers/mtd/devices/docprobe.c +++ b/drivers/mtd/devices/docprobe.c @@ -81,9 +81,6 @@ static unsigned long __initdata doc_locations[] = { #endif /* CONFIG_MTD_DOCPROBE_HIGH */ #elif defined(__PPC__) 0xe4000000, -#elif defined(CONFIG_MOMENCO_OCELOT) - 0x2f000000, - 0xff000000, #elif defined(CONFIG_MOMENCO_OCELOT_G) 0xff000000, ##else diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 17c868034a..e96259f22c 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -56,9 +56,6 @@ static unsigned long __initdata doc_locations[] = { #endif /* CONFIG_MTD_DOCPROBE_HIGH */ #elif defined(__PPC__) 0xe4000000, -#elif defined(CONFIG_MOMENCO_OCELOT) - 0x2f000000, - 0xff000000, #elif defined(CONFIG_MOMENCO_OCELOT_G) 0xff000000, #else diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h index 2883ccc69e..c0715d0a6b 100644 --- a/include/asm-mips/war.h +++ b/include/asm-mips/war.h @@ -182,9 +182,8 @@ * exceptions. */ #if defined(CONFIG_BASLER_EXCITE) || defined(CONFIG_MIPS_ATLAS) || \ - defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MOMENCO_OCELOT) || \ - defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_SGI_IP32) || \ - defined(CONFIG_WR_PPMC) + defined(CONFIG_MIPS_MALTA) || defined(CONFIG_PMC_YOSEMITE) || \ + defined(CONFIG_SGI_IP32) || defined(CONFIG_WR_PPMC) #define ICACHE_REFILLS_WORKAROUND_WAR 1 #endif -- 2.39.5