From 0a577ce34f703c885f807e2abc77dff02c7857af Mon Sep 17 00:00:00 2001 From: "V. Ananda Krishnan" Date: Fri, 3 Feb 2006 03:04:30 -0800 Subject: [PATCH] [PATCH] jsm: update for tty buffering revamp Signed-off-by: V. Ananda Krishnan Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 28 ++--- drivers/serial/jsm/jsm_tty.c | 208 +++++++++++------------------------ 2 files changed, 79 insertions(+), 157 deletions(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 0d38f0f2ae..ee4265d7a8 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -892,20 +892,20 @@ config SERIAL_VR41XX_CONSOLE a console on a serial port, say Y. Otherwise, say N. config SERIAL_JSM - tristate "Digi International NEO PCI Support" - depends on PCI && BROKEN - select SERIAL_CORE - help - This is a driver for Digi International's Neo series - of cards which provide multiple serial ports. You would need - something like this to connect more than two modems to your Linux - box, for instance in order to become a dial-in server. This driver - supports PCI boards only. - If you have a card like this, say Y here and read the file - . - - To compile this driver as a module, choose M here: the - module will be called jsm. + tristate "Digi International NEO PCI Support" + depends on PCI + select SERIAL_CORE + help + This is a driver for Digi International's Neo series + of cards which provide multiple serial ports. You would need + something like this to connect more than two modems to your Linux + box, for instance in order to become a dial-in server. This driver + supports PCI boards only. + If you have a card like this, say Y here and read the file + . + + To compile this driver as a module, choose M here: the + module will be called jsm. config SERIAL_SGI_IOC4 tristate "SGI IOC4 controller serial support" diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 6fa0d62d6f..07bf28ca33 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -20,8 +20,10 @@ * * Contact Information: * Scott H Kilau - * Wendy Xiong - * + * Ananda Venkatarman + * Modifications: + * 01/19/06: changed jsm_input routine to use the dynamically allocated + * tty_buffer changes. Contributors: Scott Kilau and Ananda V. ***********************************************************************/ #include #include @@ -497,16 +499,16 @@ void jsm_input(struct jsm_channel *ch) { struct jsm_board *bd; struct tty_struct *tp; + struct tty_ldisc *ld; u32 rmask; u16 head; u16 tail; int data_len; unsigned long lock_flags; - int flip_len; + int flip_len = 0; int len = 0; int n = 0; char *buf = NULL; - char *buf2 = NULL; int s = 0; int i = 0; @@ -574,56 +576,50 @@ void jsm_input(struct jsm_channel *ch) /* * If the rxbuf is empty and we are not throttled, put as much - * as we can directly into the linux TTY flip buffer. - * The jsm_rawreadok case takes advantage of carnal knowledge that - * the char_buf and the flag_buf are next to each other and - * are each of (2 * TTY_FLIPBUF_SIZE) size. + * as we can directly into the linux TTY buffer. * - * NOTE: if(!tty->real_raw), the call to ldisc.receive_buf - *actually still uses the flag buffer, so you can't - *use it for input data */ - if (jsm_rawreadok) { - if (tp->real_raw) - flip_len = MYFLIPLEN; - else - flip_len = 2 * TTY_FLIPBUF_SIZE; - } else - flip_len = TTY_FLIPBUF_SIZE - tp->flip.count; + flip_len = TTY_FLIPBUF_SIZE; len = min(data_len, flip_len); len = min(len, (N_TTY_BUF_SIZE - 1) - tp->read_cnt); + ld = tty_ldisc_ref(tp); - if (len <= 0) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n"); - return; - } + /* + * If the DONT_FLIP flag is on, don't flush our buffer, and act + * like the ld doesn't have any space to put the data right now. + */ + if (test_bit(TTY_DONT_FLIP, &tp->flags)) + len = 0; /* - * If we're bypassing flip buffers on rx, we can blast it - * right into the beginning of the buffer. + * If we were unable to get a reference to the ld, + * don't flush our buffer, and act like the ld doesn't + * have any space to put the data right now. */ - if (jsm_rawreadok) { - if (tp->real_raw) { - if (ch->ch_flags & CH_FLIPBUF_IN_USE) { - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "JSM - FLIPBUF in use. delaying input\n"); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - return; - } - ch->ch_flags |= CH_FLIPBUF_IN_USE; - buf = ch->ch_bd->flipbuf; - buf2 = NULL; - } else { - buf = tp->flip.char_buf; - buf2 = tp->flip.flag_buf; - } + if (!ld) { + len = 0; } else { - buf = tp->flip.char_buf_ptr; - buf2 = tp->flip.flag_buf_ptr; + /* + * If ld doesn't have a pointer to a receive_buf function, + * flush the data, then act like the ld doesn't have any + * space to put the data right now. + */ + if (!ld->receive_buf) { + ch->ch_r_head = ch->ch_r_tail; + len = 0; + } } + if (len <= 0) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n"); + if (ld) + tty_ldisc_deref(ld); + return; + } + + len = tty_buffer_request_room(tp, len); n = len; /* @@ -638,121 +634,47 @@ void jsm_input(struct jsm_channel *ch) if (s <= 0) break; - memcpy(buf, ch->ch_rqueue + tail, s); - - /* buf2 is only set when port isn't raw */ - if (buf2) - memcpy(buf2, ch->ch_equeue + tail, s); - - tail += s; - buf += s; - if (buf2) - buf2 += s; - n -= s; - /* Flip queue if needed */ - tail &= rmask; - } + /* + * If conditions are such that ld needs to see all + * UART errors, we will have to walk each character + * and error byte and send them to the buffer one at + * a time. + */ - /* - * In high performance mode, we don't have to update - * flag_buf or any of the counts or pointers into flip buf. - */ - if (!jsm_rawreadok) { if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { - for (i = 0; i < len; i++) { + for (i = 0; i < s; i++) { /* * Give the Linux ld the flags in the * format it likes. */ - if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI) - tp->flip.flag_buf_ptr[i] = TTY_BREAK; - else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE) - tp->flip.flag_buf_ptr[i] = TTY_PARITY; - else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE) - tp->flip.flag_buf_ptr[i] = TTY_FRAME; + if (*(ch->ch_equeue +tail +i) & UART_LSR_BI) + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_BREAK); + else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE) + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_PARITY); + else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE) + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME); else - tp->flip.flag_buf_ptr[i] = TTY_NORMAL; + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL); } } else { - memset(tp->flip.flag_buf_ptr, 0, len); + tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ; } - - tp->flip.char_buf_ptr += len; - tp->flip.flag_buf_ptr += len; - tp->flip.count += len; - } - else if (!tp->real_raw) { - if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { - for (i = 0; i < len; i++) { - /* - * Give the Linux ld the flags in the - * format it likes. - */ - if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI) - tp->flip.flag_buf_ptr[i] = TTY_BREAK; - else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE) - tp->flip.flag_buf_ptr[i] = TTY_PARITY; - else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE) - tp->flip.flag_buf_ptr[i] = TTY_FRAME; - else - tp->flip.flag_buf_ptr[i] = TTY_NORMAL; - } - } else - memset(tp->flip.flag_buf, 0, len); + tail += s; + n -= s; + /* Flip queue if needed */ + tail &= rmask; } - /* - * If we're doing raw reads, jam it right into the - * line disc bypassing the flip buffers. - */ - if (jsm_rawreadok) { - if (tp->real_raw) { - ch->ch_r_tail = tail & rmask; - ch->ch_e_tail = tail & rmask; - - jsm_check_queue_flow_control(ch); - - /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */ + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + /* Tell the tty layer its okay to "eat" the data now */ + tty_flip_buffer_push(tp); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "jsm_input. %d real_raw len:%d calling receive_buf for board %d\n", - __LINE__, len, ch->ch_bd->boardnum); - tp->ldisc.receive_buf(tp, ch->ch_bd->flipbuf, NULL, len); - - /* Allow use of channel flip buffer again */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - ch->ch_flags &= ~CH_FLIPBUF_IN_USE; - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - } else { - ch->ch_r_tail = tail & rmask; - ch->ch_e_tail = tail & rmask; - - jsm_check_queue_flow_control(ch); - - /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */ - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "jsm_input. %d not real_raw len:%d calling receive_buf for board %d\n", - __LINE__, len, ch->ch_bd->boardnum); - - tp->ldisc.receive_buf(tp, tp->flip.char_buf, tp->flip.flag_buf, len); - } - } else { - ch->ch_r_tail = tail & rmask; - ch->ch_e_tail = tail & rmask; - - jsm_check_queue_flow_control(ch); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "jsm_input. %d not jsm_read raw okay scheduling flip\n", __LINE__); - tty_schedule_flip(tp); - } + if (ld) + tty_ldisc_deref(ld); jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); } -- 2.39.5