From 09ce3512dcad0ad1d07eee0dc5ebb6d037c39c16 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Fri, 31 Mar 2006 02:30:48 -0800 Subject: [PATCH] [PATCH] 3c59x: fix networking for 10base2 NICs The "3c59x: use mii_check_media" patch introduced a netif_carrier_off in vortex_up. 10base2 stoped working because of this. This is removed. Tx/Rx reset is back in vortex_up because the 3c900B-Combo stops working after changing from half duplex to full duplex when Tx/Rx reset is done with vortex_timer. Also brought back some mii stuff to be sure that it does not break something else. Thanks to Pete Clements for reporting and testing. Signed-off-by: Steffen Klassert Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/3c59x.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 5112907985..274b0138d4 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -788,7 +788,7 @@ struct vortex_private { int options; /* User-settable misc. driver options. */ unsigned int media_override:4, /* Passed-in media type. */ default_media:4, /* Read from the EEPROM/Wn3_Config. */ - full_duplex:1, force_fd:1, autoselect:1, + full_duplex:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */ full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */ flow_ctrl:1, /* Use 802.3x flow control (PAUSE only) */ @@ -1633,12 +1633,6 @@ vortex_set_duplex(struct net_device *dev) ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0), ioaddr + Wn3_MAC_Ctrl); - - issue_and_wait(dev, TxReset); - /* - * Don't reset the PHY - that upsets autonegotiation during DHCP operations. - */ - issue_and_wait(dev, RxReset|0x04); } static void vortex_check_media(struct net_device *dev, unsigned int init) @@ -1663,7 +1657,7 @@ vortex_up(struct net_device *dev) struct vortex_private *vp = netdev_priv(dev); void __iomem *ioaddr = vp->ioaddr; unsigned int config; - int i; + int i, mii_reg1, mii_reg5; if (VORTEX_PCI(vp)) { pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */ @@ -1723,14 +1717,23 @@ vortex_up(struct net_device *dev) printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config); iowrite32(config, ioaddr + Wn3_Config); - netif_carrier_off(dev); if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { EL3WINDOW(4); + mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR); + mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA); + vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0); + vortex_check_media(dev, 1); } else vortex_set_duplex(dev); + issue_and_wait(dev, TxReset); + /* + * Don't reset the PHY - that upsets autonegotiation during DHCP operations. + */ + issue_and_wait(dev, RxReset|0x04); + iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD); -- 2.39.5