From 068d9f6eb9369a00eb45be91c07653cfef65f4a0 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Wed, 31 Jan 2007 18:01:45 +0100 Subject: [PATCH] [AVR32] Add nwait and tdf parameters to SMC configuration Complete the SMC configuration code by adding nwait and tdf parameter. After this change, we support the same parameters as the hardware. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/hsmc.c | 23 +++++++++++++++++++++++ include/asm-avr32/arch-at32ap/smc.h | 22 ++++++++++++++++++++++ 2 files changed, 45 insertions(+) diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c index 7691721928..5e22a75063 100644 --- a/arch/avr32/mach-at32ap/hsmc.c +++ b/arch/avr32/mach-at32ap/hsmc.c @@ -75,12 +75,35 @@ int smc_set_configuration(int cs, const struct smc_config *config) return -EINVAL; } + switch (config->nwait_mode) { + case 0: + mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED); + break; + case 1: + mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED); + break; + case 2: + mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN); + break; + case 3: + mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY); + break; + default: + return -EINVAL; + } + + if (config->tdf_cycles) { + mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles); + } + if (config->nrd_controlled) mode |= HSMC_BIT(READ_MODE); if (config->nwe_controlled) mode |= HSMC_BIT(WRITE_MODE); if (config->byte_write) mode |= HSMC_BIT(BAT); + if (config->tdf_mode) + mode |= HSMC_BIT(TDF_MODE); pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n", cs, setup, pulse, cycle, mode); diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h index 3732b32830..07152b7fd9 100644 --- a/include/asm-avr32/arch-at32ap/smc.h +++ b/include/asm-avr32/arch-at32ap/smc.h @@ -47,11 +47,33 @@ struct smc_config { */ unsigned int nwe_controlled:1; + /* + * 0: NWAIT is disabled + * 1: Reserved + * 2: NWAIT is frozen mode + * 3: NWAIT in ready mode + */ + unsigned int nwait_mode:2; + /* * 0: Byte select access type * 1: Byte write access type */ unsigned int byte_write:1; + + /* + * Number of clock cycles before data is released after + * the rising edge of the read controlling signal + * + * Total cycles from SMC is tdf_cycles + 1 + */ + unsigned int tdf_cycles:4; + + /* + * 0: TDF optimization disabled + * 1: TDF optimization enabled + */ + unsigned int tdf_mode:1; }; extern int smc_set_configuration(int cs, const struct smc_config *config); -- 2.39.5