From 0475169c13e177e1af5a02f5e9f30fda13dc0b86 Mon Sep 17 00:00:00 2001 From: Andrew Paprocki Date: Wed, 6 Aug 2008 22:41:06 +0200 Subject: [PATCH] hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07 The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07. Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The patch enables 16-bit fan readings on all revisions >= 0x07 just like the it8716 and it8718 chips. Signed-off-by: Andrew Paprocki Signed-off-by: Jean Delvare --- Documentation/hwmon/it87 | 9 +++++---- drivers/hwmon/it87.c | 32 ++++++++++++++++++++++---------- 2 files changed, 27 insertions(+), 14 deletions(-) diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index f4ce1fdbef..d931525f3f 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -11,7 +11,9 @@ Supported chips: Prefix: 'it8712' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website - http://www.ite.com.tw/ + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf * IT8716F/IT8726F Prefix: 'it8716' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -90,14 +92,13 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. The IT8716F, IT8718F and later IT8712F revisions have support for -2 additional fans. They are supported by the driver for the IT8716F and -IT8718F but not for the IT8712F +2 additional fans. The additional fans are supported by the driver. The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This is better (no more fan clock divider mess) but not compatible with the older chips and revisions. For now, the driver only uses the 16-bit mode on the -IT8716F and IT8718F. +late IT8712F, IT8716F and IT8718F. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index e12c132ff8..2a365681f9 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -151,9 +151,9 @@ static int fix_pwm_polarity; /* The IT8718F has the VID value in a different register, in Super-I/O configuration space. */ #define IT87_REG_VID 0x0a -/* Warning: register 0x0b is used for something completely different in - new chips/revisions. I suspect only 16-bit tachometer mode will work - for these. */ +/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b + for fan divisors. Later IT8712F revisions must use 16-bit tachometer + mode. */ #define IT87_REG_FAN_DIV 0x0b #define IT87_REG_FAN_16BIT 0x0c @@ -234,6 +234,7 @@ static const unsigned int pwm_freq[8] = { struct it87_sio_data { enum chips type; /* Values read from Super-I/O config space */ + u8 revision; u8 vid_value; }; @@ -242,6 +243,7 @@ struct it87_sio_data { struct it87_data { struct device *hwmon_dev; enum chips type; + u8 revision; unsigned short addr; const char *name; @@ -268,6 +270,14 @@ struct it87_data { u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ }; +static inline int has_16bit_fans(const struct it87_data *data) +{ + /* IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. + This is the first revision with 16bit tachometer support. */ + return (data->type == it8712 && data->revision >= 0x07) + || data->type == it8716 + || data->type == it8718; +} static int it87_probe(struct platform_device *pdev); static int __devexit it87_remove(struct platform_device *pdev); @@ -991,8 +1001,9 @@ static int __init it87_find(unsigned short *address, } err = 0; + sio_data->revision = superio_inb(DEVREV) & 0x0f; pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", - chip_type, *address, superio_inb(DEVREV) & 0x0f); + chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ if (chip_type != IT8705F_DEVID) { @@ -1045,6 +1056,7 @@ static int __devinit it87_probe(struct platform_device *pdev) data->addr = res->start; data->type = sio_data->type; + data->revision = sio_data->revision; data->name = names[sio_data->type]; /* Now, we do the remaining detection. */ @@ -1069,7 +1081,7 @@ static int __devinit it87_probe(struct platform_device *pdev) goto ERROR2; /* Do not create fan files for disabled fans */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { /* 16-bit tachometers */ if (data->has_fan & (1 << 0)) { if ((err = device_create_file(dev, @@ -1350,7 +1362,7 @@ static void __devinit it87_init_device(struct platform_device *pdev) data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; /* Set tachometers to 16-bit mode if needed */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { tmp = it87_read_value(data, IT87_REG_FAN_16BIT); if (~tmp & 0x07 & data->has_fan) { dev_dbg(&pdev->dev, @@ -1426,7 +1438,7 @@ static struct it87_data *it87_update_device(struct device *dev) data->fan[i] = it87_read_value(data, IT87_REG_FAN[i]); /* Add high byte if in 16-bit mode */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { data->fan[i] |= it87_read_value(data, IT87_REG_FANX[i]) << 8; data->fan_min[i] |= it87_read_value(data, @@ -1443,8 +1455,7 @@ static struct it87_data *it87_update_device(struct device *dev) } /* Newer chips don't have clock dividers */ - if ((data->has_fan & 0x07) && data->type != it8716 - && data->type != it8718) { + if ((data->has_fan & 0x07) && !has_16bit_fans(data)) { i = it87_read_value(data, IT87_REG_FAN_DIV); data->fan_div[0] = i & 0x07; data->fan_div[1] = (i >> 3) & 0x07; @@ -1460,7 +1471,8 @@ static struct it87_data *it87_update_device(struct device *dev) data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL); data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); - /* The 8705 does not have VID capability */ + /* The 8705 does not have VID capability. + The 8718 does not use IT87_REG_VID for the same purpose. */ if (data->type == it8712 || data->type == it8716) { data->vid = it87_read_value(data, IT87_REG_VID); /* The older IT8712F revisions had only 5 VID pins, -- 2.39.2