From 03501dab035ab7da5e1373f5e130cfd6346d3f21 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 26 Oct 2005 17:11:18 +1000 Subject: [PATCH] powerpc: Pull common bits of setup_{32,64}.c into setup-common.c This creates a new arch/powerpc/kernel/setup-common.c with various bits that setup_32.c and setup_64.c had in common - functions like machine_shutdown/restart/power_off, show_cpuinfo, set_preferred_console etc. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/ppc_ksyms.c | 2 - arch/powerpc/kernel/setup-common.c | 412 +++++++++++++++++++++++++++++ arch/powerpc/kernel/setup_32.c | 249 +---------------- 4 files changed, 417 insertions(+), 248 deletions(-) create mode 100644 arch/powerpc/kernel/setup-common.c diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index eaedb7e633..30101762f7 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -32,7 +32,7 @@ extra-$(CONFIG_PPC_FPU) += fpu.o extra-y += vmlinux.lds obj-y += process.o init_task.o time.o \ - prom.o systbl.o traps.o + prom.o systbl.o traps.o setup-common.o obj-$(CONFIG_PPC32) += entry_32.o idle_6xx.o setup_32.o misc_32.o obj-$(CONFIG_PPC64) += setup_64.o misc_64.o obj-$(CONFIG_PPC_OF) += prom_init.o diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 254bf9c0b5..5f3a12bb89 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include @@ -231,7 +230,6 @@ EXPORT_SYMBOL(screen_info); #endif #ifdef CONFIG_PPC32 -EXPORT_SYMBOL(pm_power_off); EXPORT_SYMBOL(__delay); EXPORT_SYMBOL(timer_interrupt); EXPORT_SYMBOL(irq_desc); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c new file mode 100644 index 0000000000..d4f0a4c3b5 --- /dev/null +++ b/arch/powerpc/kernel/setup-common.c @@ -0,0 +1,412 @@ +/* + * Common boot and setup code for both 32-bit and 64-bit. + * Extracted from arch/powerpc/kernel/setup_64.c. + * + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* + * This still seems to be needed... -- paulus + */ +struct screen_info screen_info = { + .orig_x = 0, + .orig_y = 25, + .orig_video_cols = 80, + .orig_video_lines = 25, + .orig_video_isVGA = 1, + .orig_video_points = 16 +}; + +#ifdef __DO_IRQ_CANON +/* XXX should go elsewhere eventually */ +int ppc_do_canonicalize_irqs; +EXPORT_SYMBOL(ppc_do_canonicalize_irqs); +#endif + +/* also used by kexec */ +void machine_shutdown(void) +{ + if (ppc_md.nvram_sync) + ppc_md.nvram_sync(); +} + +void machine_restart(char *cmd) +{ + machine_shutdown(); + ppc_md.restart(cmd); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; +} + +void machine_power_off(void) +{ + machine_shutdown(); + ppc_md.power_off(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; +} +/* Used by the G5 thermal driver */ +EXPORT_SYMBOL_GPL(machine_power_off); + +void (*pm_power_off)(void) = machine_power_off; +EXPORT_SYMBOL_GPL(pm_power_off); + +void machine_halt(void) +{ + machine_shutdown(); + ppc_md.halt(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; +} + + +#ifdef CONFIG_TAU +extern u32 cpu_temp(unsigned long cpu); +extern u32 cpu_temp_both(unsigned long cpu); +#endif /* CONFIG_TAU */ + +#ifdef CONFIG_SMP +DEFINE_PER_CPU(unsigned int, pvr); +#endif + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + unsigned long cpu_id = (unsigned long)v - 1; + unsigned int pvr; + unsigned short maj; + unsigned short min; + + if (cpu_id == NR_CPUS) { +#if defined(CONFIG_SMP) && defined(CONFIG_PPC32) + unsigned long bogosum = 0; + int i; + for (i = 0; i < NR_CPUS; ++i) + if (cpu_online(i)) + bogosum += loops_per_jiffy; + seq_printf(m, "total bogomips\t: %lu.%02lu\n", + bogosum/(500000/HZ), bogosum/(5000/HZ) % 100); +#endif /* CONFIG_SMP && CONFIG_PPC32 */ + seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq); + + if (ppc_md.show_cpuinfo != NULL) + ppc_md.show_cpuinfo(m); + + return 0; + } + + /* We only show online cpus: disable preempt (overzealous, I + * knew) to prevent cpu going down. */ + preempt_disable(); + if (!cpu_online(cpu_id)) { + preempt_enable(); + return 0; + } + +#ifdef CONFIG_SMP +#ifdef CONFIG_PPC64 /* XXX for now */ + pvr = per_cpu(pvr, cpu_id); +#else + pvr = cpu_data[cpu_id].pvr; +#endif +#else + pvr = mfspr(SPRN_PVR); +#endif + maj = (pvr >> 8) & 0xFF; + min = pvr & 0xFF; + + seq_printf(m, "processor\t: %lu\n", cpu_id); + seq_printf(m, "cpu\t\t: "); + + if (cur_cpu_spec->pvr_mask) + seq_printf(m, "%s", cur_cpu_spec->cpu_name); + else + seq_printf(m, "unknown (%08x)", pvr); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + seq_printf(m, ", altivec supported"); +#endif /* CONFIG_ALTIVEC */ + + seq_printf(m, "\n"); + +#ifdef CONFIG_TAU + if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) { +#ifdef CONFIG_TAU_AVERAGE + /* more straightforward, but potentially misleading */ + seq_printf(m, "temperature \t: %u C (uncalibrated)\n", + cpu_temp(i)); +#else + /* show the actual temp sensor range */ + u32 temp; + temp = cpu_temp_both(i); + seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n", + temp & 0xff, temp >> 16); +#endif + } +#endif /* CONFIG_TAU */ + + /* + * Assume here that all clock rates are the same in a + * smp system. -- Cort + */ + if (ppc_proc_freq) + seq_printf(m, "clock\t\t: %lu.%06luMHz\n", + ppc_proc_freq / 1000000, ppc_proc_freq % 1000000); + + if (ppc_md.show_percpuinfo != NULL) + ppc_md.show_percpuinfo(m, cpu_id); + + /* If we are a Freescale core do a simple check so + * we dont have to keep adding cases in the future */ + if (PVR_VER(pvr) & 0x8000) { + maj = PVR_MAJ(pvr); + min = PVR_MIN(pvr); + } else { + switch (PVR_VER(pvr)) { + case 0x0020: /* 403 family */ + maj = PVR_MAJ(pvr) + 1; + min = PVR_MIN(pvr); + break; + case 0x1008: /* 740P/750P ?? */ + maj = ((pvr >> 8) & 0xFF) - 1; + min = pvr & 0xFF; + break; + default: + maj = (pvr >> 8) & 0xFF; + min = pvr & 0xFF; + break; + } + } + + seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n", + maj, min, PVR_VER(pvr), PVR_REV(pvr)); + +#ifdef CONFIG_PPC32 + seq_printf(m, "bogomips\t: %lu.%02lu\n", + loops_per_jiffy / (500000/HZ), + (loops_per_jiffy / (5000/HZ)) % 100); +#endif + +#ifdef CONFIG_SMP + seq_printf(m, "\n"); +#endif + + preempt_enable(); + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + unsigned long i = *pos; + + return i <= NR_CPUS ? (void *)(i + 1) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +struct seq_operations cpuinfo_op = { + .start =c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; + +#ifdef CONFIG_PPC_MULTIPLATFORM +static int __init set_preferred_console(void) +{ + struct device_node *prom_stdout = NULL; + char *name; + u32 *spd; + int offset = 0; + + DBG(" -> set_preferred_console()\n"); + + /* The user has requested a console so this is already set up. */ + if (strstr(saved_command_line, "console=")) { + DBG(" console was specified !\n"); + return -EBUSY; + } + + if (!of_chosen) { + DBG(" of_chosen is NULL !\n"); + return -ENODEV; + } + /* We are getting a weird phandle from OF ... */ + /* ... So use the full path instead */ + name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) { + DBG(" no linux,stdout-path !\n"); + return -ENODEV; + } + prom_stdout = of_find_node_by_path(name); + if (!prom_stdout) { + DBG(" can't find stdout package %s !\n", name); + return -ENODEV; + } + DBG("stdout is %s\n", prom_stdout->full_name); + + name = (char *)get_property(prom_stdout, "name", NULL); + if (!name) { + DBG(" stdout package has no name !\n"); + goto not_found; + } + spd = (u32 *)get_property(prom_stdout, "current-speed", NULL); + + if (0) + ; +#ifdef CONFIG_SERIAL_8250_CONSOLE + else if (strcmp(name, "serial") == 0) { + int i; + u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); + if (i > 8) { + switch (reg[1]) { + case 0x3f8: + offset = 0; + break; + case 0x2f8: + offset = 1; + break; + case 0x898: + offset = 2; + break; + case 0x890: + offset = 3; + break; + default: + /* We dont recognise the serial port */ + goto not_found; + } + } + } +#endif /* CONFIG_SERIAL_8250_CONSOLE */ +#ifdef CONFIG_PPC_PSERIES + else if (strcmp(name, "vty") == 0) { + u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL); + char *compat = (char *)get_property(prom_stdout, "compatible", NULL); + + if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) { + /* Host Virtual Serial Interface */ + int offset; + switch (reg[0]) { + case 0x30000000: + offset = 0; + break; + case 0x30000001: + offset = 1; + break; + default: + goto not_found; + } + of_node_put(prom_stdout); + DBG("Found hvsi console at offset %d\n", offset); + return add_preferred_console("hvsi", offset, NULL); + } else { + /* pSeries LPAR virtual console */ + of_node_put(prom_stdout); + DBG("Found hvc console\n"); + return add_preferred_console("hvc", 0, NULL); + } + } +#endif /* CONFIG_PPC_PSERIES */ +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + else if (strcmp(name, "ch-a") == 0) + offset = 0; + else if (strcmp(name, "ch-b") == 0) + offset = 1; +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + else + goto not_found; + of_node_put(prom_stdout); + + DBG("Found serial console at ttyS%d\n", offset); + + if (spd) { + static char __initdata opt[16]; + sprintf(opt, "%d", *spd); + return add_preferred_console("ttyS", offset, opt); + } else + return add_preferred_console("ttyS", offset, NULL); + + not_found: + DBG("No preferred console found !\n"); + of_node_put(prom_stdout); + return -ENODEV; +} +console_initcall(set_preferred_console); +#endif /* CONFIG_PPC_MULTIPLATFORM */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index c6a67c6585..295d5c77f0 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -41,6 +41,8 @@ #include #include +#define DBG(fmt...) + #if defined CONFIG_KGDB #include #endif @@ -108,168 +110,6 @@ struct screen_info screen_info = { }; #endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */ -void machine_restart(char *cmd) -{ -#ifdef CONFIG_NVRAM - nvram_sync(); -#endif - ppc_md.restart(cmd); -} - -void machine_power_off(void) -{ -#ifdef CONFIG_NVRAM - nvram_sync(); -#endif - ppc_md.power_off(); -} - -void machine_halt(void) -{ -#ifdef CONFIG_NVRAM - nvram_sync(); -#endif - ppc_md.halt(); -} - -void (*pm_power_off)(void) = machine_power_off; - -#ifdef CONFIG_TAU -extern u32 cpu_temp(unsigned long cpu); -extern u32 cpu_temp_both(unsigned long cpu); -#endif /* CONFIG_TAU */ - -int show_cpuinfo(struct seq_file *m, void *v) -{ - int i = (int) v - 1; - unsigned int pvr; - unsigned short maj, min; - unsigned long lpj; - - if (i >= NR_CPUS) { - /* Show summary information */ -#ifdef CONFIG_SMP - unsigned long bogosum = 0; - for (i = 0; i < NR_CPUS; ++i) - if (cpu_online(i)) - bogosum += cpu_data[i].loops_per_jiffy; - seq_printf(m, "total bogomips\t: %lu.%02lu\n", - bogosum/(500000/HZ), bogosum/(5000/HZ) % 100); -#endif /* CONFIG_SMP */ - - if (ppc_md.show_cpuinfo != NULL) - ppc_md.show_cpuinfo(m); - return 0; - } - -#ifdef CONFIG_SMP - if (!cpu_online(i)) - return 0; - pvr = cpu_data[i].pvr; - lpj = cpu_data[i].loops_per_jiffy; -#else - pvr = mfspr(SPRN_PVR); - lpj = loops_per_jiffy; -#endif - - seq_printf(m, "processor\t: %d\n", i); - seq_printf(m, "cpu\t\t: "); - - if (cur_cpu_spec->pvr_mask) - seq_printf(m, "%s", cur_cpu_spec->cpu_name); - else - seq_printf(m, "unknown (%08x)", pvr); -#ifdef CONFIG_ALTIVEC - if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC) - seq_printf(m, ", altivec supported"); -#endif - seq_printf(m, "\n"); - -#ifdef CONFIG_TAU - if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) { -#ifdef CONFIG_TAU_AVERAGE - /* more straightforward, but potentially misleading */ - seq_printf(m, "temperature \t: %u C (uncalibrated)\n", - cpu_temp(i)); -#else - /* show the actual temp sensor range */ - u32 temp; - temp = cpu_temp_both(i); - seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n", - temp & 0xff, temp >> 16); -#endif - } -#endif /* CONFIG_TAU */ - - if (ppc_md.show_percpuinfo != NULL) - ppc_md.show_percpuinfo(m, i); - - /* If we are a Freescale core do a simple check so - * we dont have to keep adding cases in the future */ - if (PVR_VER(pvr) & 0x8000) { - maj = PVR_MAJ(pvr); - min = PVR_MIN(pvr); - } else { - switch (PVR_VER(pvr)) { - case 0x0020: /* 403 family */ - maj = PVR_MAJ(pvr) + 1; - min = PVR_MIN(pvr); - break; - case 0x1008: /* 740P/750P ?? */ - maj = ((pvr >> 8) & 0xFF) - 1; - min = pvr & 0xFF; - break; - default: - maj = (pvr >> 8) & 0xFF; - min = pvr & 0xFF; - break; - } - } - - /* - * Assume here that all clock rates are the same in a - * smp system. -- Cort - */ - seq_printf(m, "clock\t\t: %lu.%06luMHz\n", ppc_proc_freq / 1000000, - ppc_proc_freq % 1000000); - - seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n", - maj, min, PVR_VER(pvr), PVR_REV(pvr)); - - seq_printf(m, "bogomips\t: %lu.%02lu\n", - lpj / (500000/HZ), (lpj / (5000/HZ)) % 100); - -#ifdef CONFIG_SMP - seq_printf(m, "\n"); -#endif - - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - int i = *pos; - - return i <= NR_CPUS? (void *) (i + 1): NULL; -} - -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} - -static void c_stop(struct seq_file *m, void *v) -{ -} - -struct seq_operations cpuinfo_op = { - .start =c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; - /* * We're called here very early in the boot. We determine the machine * type and call the appropriate low-level setup functions. @@ -297,30 +137,6 @@ unsigned long __init early_init(unsigned long dt_ptr) return KERNELBASE + offset; } -#ifdef CONFIG_PPC_OF -void __init -intuit_machine_type(void) -{ - char *model; - struct device_node *root; - - /* ask the OF info if we're a chrp or pmac */ - root = find_path_device("/"); - if (root != 0) { - /* assume pmac unless proven to be chrp -- Cort */ - _machine = _MACH_Pmac; - model = get_property(root, "device_type", NULL); - if (model && !strncmp("chrp", model, 4)) - _machine = _MACH_chrp; - else { - model = get_property(root, "model", NULL); - if (model && !strncmp(model, "IBM", 3)) - _machine = _MACH_chrp; - } - } -} -#endif - #ifdef CONFIG_PPC_MULTIPLATFORM /* * The PPC_MULTIPLATFORM version of platform_init... @@ -362,64 +178,7 @@ void __init platform_init(void) #endif } } - -#ifdef CONFIG_SERIAL_CORE_CONSOLE -extern char *of_stdout_device; - -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout; - char *name; - int offset = 0; - - if (of_stdout_device == NULL) - return -ENODEV; - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) - return -EBUSY; - - prom_stdout = find_path_device(of_stdout_device); - if (!prom_stdout) - return -ENODEV; - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) - return -ENODEV; - - if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - return -ENODEV; - } - } - } else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; - else - return -ENODEV; - return add_preferred_console("ttyS", offset, NULL); -} -console_initcall(set_preferred_console); -#endif /* CONFIG_SERIAL_CORE_CONSOLE */ -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* * Find out what kind of machine we're on and save any data we need @@ -545,7 +304,7 @@ void __init setup_arch(char **cmdline_p) init_boot_display(); #endif -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PMAC /* This could be called "early setup arch", it must be done * now because xmon need it */ -- 2.39.5