From 7391ff35b241dbcba471e05059b5c05fdc8196db Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 20 Jul 2007 13:49:29 -0500 Subject: [PATCH] [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB For the Freescale PCIe PHBs Not all firmwares setup the virtual P2P bridge registers properly. Make sure they get setup based on what the struct pci_controller got from the device tree. Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index dcd0ca86bd..f88a9aecdf 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -118,11 +118,24 @@ static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev) return; } + /* Clear out any of the virtual P2P bridge registers */ + pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0); + pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, 0); + pci_write_config_byte(dev, PCI_IO_BASE, 0x10); + pci_write_config_byte(dev, PCI_IO_LIMIT, 0); + pci_write_config_word(dev, PCI_MEMORY_BASE, 0x10); + pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0); + pci_write_config_word(dev, PCI_PREF_BASE_UPPER32, 0x0); + pci_write_config_word(dev, PCI_PREF_LIMIT_UPPER32, 0x0); + pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10); + pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0); + if (hose->io_resource.flags) { res = &dev->resource[res_idx++]; res->start = hose->io_resource.start; res->end = hose->io_resource.end; res->flags = hose->io_resource.flags; + update_bridge_resource(dev, res); } for (i = 0; i < 3; i++) { @@ -130,6 +143,7 @@ static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev) res->start = hose->mem_resources[i].start; res->end = hose->mem_resources[i].end; res->flags = hose->mem_resources[i].flags; + update_bridge_resource(dev, res); } } -- 2.39.2