Merge branch 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (70 commits)
KVM: Adjust smp_call_function_mask() callers to new requirements
KVM: MMU: Fix potential race setting upper shadow ptes on nonpae hosts
KVM: x86 emulator: emulate clflush
KVM: MMU: improve invalid shadow root page handling
KVM: MMU: nuke shadowed pgtable pages and ptes on memslot destruction
KVM: Prefix some x86 low level function with kvm_, to avoid namespace issues
KVM: check injected pic irq within valid pic irqs
KVM: x86 emulator: Fix HLT instruction
KVM: Apply the kernel sigmask to vcpus blocked due to being uninitialized
KVM: VMX: Add ept_sync_context in flush_tlb
KVM: mmu_shrink: kvm_mmu_zap_page requires slots_lock to be held
x86: KVM guest: make kvm_smp_prepare_boot_cpu() static
KVM: SVM: fix suspend/resume support
KVM: s390: rename private structures
KVM: s390: Set guest storage limit and offset to sane values
KVM: Fix memory leak on guest exit
KVM: s390: dont allocate dirty bitmap
KVM: move slots_lock acquision down to vapic_exit
KVM: VMX: Fake emulate Intel perfctr MSRs
KVM: VMX: Fix a wrong usage of vmcs_config
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits)
iucv: Fix bad merging.
net_sched: Add size table for qdiscs
net_sched: Add accessor function for packet length for qdiscs
net_sched: Add qdisc_enqueue wrapper
highmem: Export totalhigh_pages.
ipv6 mcast: Omit redundant address family checks in ip6_mc_source().
net: Use standard structures for generic socket address structures.
ipv6 netns: Make several "global" sysctl variables namespace aware.
netns: Use net_eq() to compare net-namespaces for optimization.
ipv6: remove unused macros from net/ipv6.h
ipv6: remove unused parameter from ip6_ra_control
tcp: fix kernel panic with listening_get_next
tcp: Remove redundant checks when setting eff_sacks
tcp: options clean up
tcp: Fix MD5 signatures for non-linear skbs
sctp: Update sctp global memory limit allocations.
sctp: remove unnecessary byteshifting, calculate directly in big-endian
sctp: Allow only 1 listening socket with SO_REUSEADDR
sctp: Do not leak memory on multiple listen() calls
sctp: Support ipv6only AF_INET6 sockets.
...
* 'for-linus' of git://www.jni.nu/cris:
[CRISv10] Clean up compressed/misc.c
[CRISv10] Correct whitespace damage.
[CRIS] Correct definition of subdirs for install_headers.
[CRIS] Correct image makefiles to allow using a separate OBJ-directory.
[CRIS] Build fixes for compressed and rescue images for v10 and v32:
It looks at least odd to apply spin_unlock to a mutex.
cris: compile fixes for 2.6.26-rc5
initrd: Fix virtual/physical mix-up in overwrite test
On recent kernels, I get the following error when using an initrd:
| initrd overwritten (0x00b78000 < 0x07668000) - disabling it.
My Amiga 4000 has 12 MiB of RAM at physical address 0x07400000 (virtual
0x00000000).
The initrd is located at the end of RAM: 0x00b78000 - 0x00c00000 (virtual).
The overwrite test compares the (virtual) initrd location to the (physical)
first available memory location, which fails.
This patch converts initrd_start to a page frame number, so it can safely be
compared with min_low_pfn.
Before the introduction of discontiguous memory support on m68k
(12d810c1b8c2b913d48e629e2b5c01d105029839), min_low_pfn was just left
untouched by the m68k-specific code (zero, I guess), and everything worked
fine.
Julia Lawall [Thu, 17 Jul 2008 19:16:34 +0000 (21:16 +0200)]
arch/m68k/mm/sun3mmu.c: Eliminate NULL test and memset after alloc_bootmem
As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory. Thus a NULL test or memset after calls to these
functions is unnecessary.
This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression E;
statement S;
@@
E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)
@@
expression E,E1;
@@
E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
- memset(E,0,E1);
// </smpl>
Julia Lawall [Thu, 17 Jul 2008 19:16:33 +0000 (21:16 +0200)]
arch/m68k/mm/motorola.c: Eliminate NULL test and memset after alloc_bootmem
As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory. Thus a NULL test or memset after calls to these
functions is unnecessary.
This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression E;
statement S;
@@
E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)
@@
expression E,E1;
@@
E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
.. when != E
- memset(E,0,E1);
// </smpl>
m68k/Apollo: remove the unused APOLLO_ELPLUS option
Looking at older kernel sources the APOLLO_ELPLUS option was added
somewhere during kernel 2.1, but even kernel 2.2.0 does not contain
any driver that would be enabled through it...
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Thu, 17 Jul 2008 19:16:31 +0000 (21:16 +0200)]
m68k/Atari: remove the dead ATARI_SCC{,_DMA} options
It seems the driver was removed back in kernel 2.3 but the options were
forgotten.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Thu, 17 Jul 2008 19:16:30 +0000 (21:16 +0200)]
m68k/Mac: remove the unused ADB_KEYBOARD option
When the driver was removed back in 2002 the option was forgotten.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Thu, 17 Jul 2008 19:16:27 +0000 (21:16 +0200)]
m68k/sun3/: possible cleanups
This patch contains the following possible cleanups:
- make the following needlessly global code static:
- config.c: sun3_bootmem_alloc()
- config.c: sun3_sched_init()
- dvma.c: dvma_page()
- idprom.c: struct Sun_Machines[]
- mmu_emu.c: struct ctx_alloc[]
- sun3dvma.c: iommu_use[]
- sun3ints.c: led_pattern[]
- remove the unused sbus.c
Adrian Bunk [Thu, 17 Jul 2008 19:16:26 +0000 (21:16 +0200)]
m68k/q40/config.c: make functions static
This patch makes the following needlessly global functions static:
- q40_reset()
- q40_halt()
- q40_disable_irqs()
- q40_gettimeoffset()
- q40_hwclk()
- q40_get_ss()
- q40_set_clock_mmss()
Adrian Bunk [Thu, 17 Jul 2008 19:16:24 +0000 (21:16 +0200)]
m68k/atari/debug.c: possible cleanups
This patch contains the following possible cleanups:
- make the following needlessly global functions (always) static:
- atari_mfp_console_write()
- atari_scc_console_write()
- atari_midi_console_write()
- atari_init_mfp_port()
- atari_init_scc_port()
- atari_init_midi_port()
- #if 0 the following unused functions:
- atari_mfp_console_wait_key()
- atari_scc_console_wait_key()
- atari_midi_console_wait_key()
- remove the following unused variables:
- atari_MFP_init_done
- atari_SCC_init_done
Adrian Bunk [Thu, 17 Jul 2008 19:16:23 +0000 (21:16 +0200)]
m68k/amiga/: possible cleanups
This patch contains the following possible cleanups:
- amiints.c: add a proper prototype for amiga_init_IRQ() in
include/asm-m68k/amigaints.h
- make the following needlessly global code static:
- config.c: amiga_model
- config.c: amiga_psfreq
- config.c: amiga_serial_console_write()
- #if 0 the following unused functions:
- config.c: amiga_serial_puts()
- config.c: amiga_serial_console_wait_key()
- config.c: amiga_serial_gets()
- remove the following unused variable:
- config.c: amiga_masterclock
atafb: Register Atari-specific video modes with sysfs
Register the Atari-specific video modes with sysfs, so you can see them in
/sys/class/graphics/fb0/modes and change the video mode by writing to
/sys/class/graphics/fb0/mode.
amifb: Register Amiga-specific video modes with sysfs
Register the Amiga-specific video modes with sysfs, so you can see them in
/sys/class/graphics/fb0/modes and change the video mode by writing to
/sys/class/graphics/fb0/mode.
Robert P. J. Day [Thu, 17 Jul 2008 19:16:16 +0000 (21:16 +0200)]
ZORRO: Replace deprecated __initcall with equivalent device_initcall.
ZORRO: Replace deprecated __initcall with equivalent device_initcall.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
> This is a no-no for those archs that still use -traditional.
> > I dunno if this is a problem for you at the moment and the
> > right fix is anyway to nuke -traditional.
> >
> > Sam
Allow no CPU/platform type for allnoconfig
- Provide a dummy value for FPSTATESIZE if no CPU type was selected
- Provide a dummy value for NR_IRQS if no platform type was selected
- Warn the user if no CPU or platform type was selected
Note: you still cannot build an allnoconfig kernel, as CONFIG_SWAP=n doesn't
build and we cannot easily fix that
(http://groups.google.com/group/linux.kernel/browse_thread/thread/d430c78b07e1827b)
Merge branch 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6
* 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6:
configfs: Allow ->make_item() and ->make_group() to return detailed errors.
Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."
Thomas Gleixner [Fri, 18 Jul 2008 00:07:02 +0000 (02:07 +0200)]
APCI: revert another duplicated patch
commit d1857056904d5f313f11184fcfa624652ff9620a ("ACPI: don't walk
tables if ACPI was disabled") is another superfluous duplicate commit
caused by git -> quilt -> git conversion.
Revert it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Due to rebasing the ACPI tree via quilt the same patch got applied again
via commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca ("dock: bay: Don't
call acpi_walk_namespace() when ACPI is disabled.")
Revert it, as it is obviously bogus.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The tty pointer has been moved into a tty_port field, so we need to use
->info->port.tty instead of just ->info->tty. Fixes these build errors:
David Brownell <david-b@pacbell.net> wrote:
> drivers/serial/atmel_serial.c: In function 'atmel_rx_from_ring':
> drivers/serial/atmel_serial.c:665: error: 'struct uart_info' has no member named 'tty'
> drivers/serial/atmel_serial.c: In function 'atmel_rx_from_dma':
> drivers/serial/atmel_serial.c:672: error: 'struct uart_info' has no member named 'tty'
> drivers/serial/atmel_serial.c: In function 'atmel_startup':
> drivers/serial/atmel_serial.c:797: error: 'struct uart_info' has no member named 'tty'
> make[2]: *** [drivers/serial/atmel_serial.o] Error 1
Alan Cox [Wed, 16 Jul 2008 20:55:37 +0000 (21:55 +0100)]
riscom8: remove bogus checks
Chris Malley posted a patch removing a NULL check in the riscom8 driver.
Further analysis shows that even more of the tests are irrelevant so we
can delete lots of stuff
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix compile errors in SGI console drivers (linux-next tree)
The below is the patch to replace blindly all possible places,
including Jack's fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
(Reviewed and checked rather than blindly added) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Rothwell [Wed, 16 Jul 2008 20:54:22 +0000 (21:54 +0100)]
ttydev: fix pamc_zilog for tty pointer move
Today's linux-next build (powerpc allyesconfig) failed like this:
drivers/serial/pmac_zilog.c: In function 'pmz_receive_chars':
drivers/serial/pmac_zilog.c:245: error: 'struct uart_info' has no member named 'tty'
drivers/serial/pmac_zilog.c:250: error: 'struct uart_info' has no member named 'tty'
I applied the patch below (which builds but may, or may not, be correct).
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Rothwell [Wed, 16 Jul 2008 20:54:11 +0000 (21:54 +0100)]
ttydev: fix pamc_zilog for tty pointer move
Today's linux-next build (sparc64 defconfig) failed like this:
drivers/serial/sunhv.c: In function `receive_chars':
drivers/serial/sunhv.c:188: error: structure has no member named `tty'
drivers/serial/sunsu.c: In function `receive_chars':
drivers/serial/sunsu.c:314: error: structure has no member named `tty'
drivers/serial/sunsab.c: In function `receive_chars':
drivers/serial/sunsab.c:121: error: structure has no member named `tty'
I applied the following patch (which, again, may not be correct).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Wed, 16 Jul 2008 20:53:50 +0000 (21:53 +0100)]
serial: use tty_port
Switch the serial_core based drivers to use the new tty_port structure.
We can't quite use all of it yet because of the dynamically allocated
extras in the serial_core layer.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Wed, 16 Jul 2008 20:53:41 +0000 (21:53 +0100)]
tty: Introduce a tty_port common structure
Every tty driver has its own concept of a port structure and because
they all differ we cannot extract commonality. Begin fixing this by
creating a structure drivers can elect to use so that over time we can
push fields into this and create commonality and then introduce common
methods.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Wed, 16 Jul 2008 20:53:31 +0000 (21:53 +0100)]
drivers/serial/: remove CVS keywords
This patch removes CVS keywords that weren't updated for a long time in
comments, printk's and MODULE_DESCRIPTION's (no printk's or
MODULE_DESCRIPTION's are completely removed).
While doing this I also found and fixed a missing \n in a printk
in m32r_sio.c
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Wed, 16 Jul 2008 20:53:12 +0000 (21:53 +0100)]
tty: Ldisc revamp
Move the line disciplines towards a conventional ->ops arrangement. For
the moment the actual 'tty_ldisc' struct in the tty is kept as part of
the tty struct but this can then be changed if it turns out that when it
all settles down we want to refcount ldiscs separately to the tty.
Pull the ldisc code out of /proc and put it with our ldisc code.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Subject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_ops
Serial drivers using DMA (like the atmel_serial driver) tend to get very
confused when the xmit buffer is flushed and nobody told them. They
also tend to spew a lot of garbage since the DMA engine keeps running
after the buffer is flushed and possibly refilled with unrelated data.
This patch adds a new flush_buffer operation to the uart_ops struct,
along with a call to it from uart_flush_buffer() right after the xmit
buffer has been cleared. The driver can implement this in order to
syncronize its internal DMA state with the xmit buffer when the buffer
is flushed.
...
CC arch/mips/sgi-ip22/ip28-berr.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c: In function 'ip28_be_interrupt':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:415: error: subscripted value is neither array nor pointer
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:415: error: subscripted value is neither array nor pointer
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:415: warning: type defaults to 'int' in declaration of 'type name'
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:424: error: subscripted value is neither array nor pointer
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:424: error: subscripted value is neither array nor pointer
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:424: warning: type defaults to 'int' in declaration of 'type name'
make[2]: *** [arch/mips/sgi-ip22/ip28-berr.o] Error 1
<-- snip -->
Using ARRAY_SIZE in these places in arch/mips/sgi-ip22/ip28-berr.c was
bogus, and therefore gets reverted by this patch.
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Fix build if only RBTX4927 or RBTX4938 was selected.
* Move gpio helpers to generic part.
* Select SOC_TX4938 for RBTX4927/37 board.
* Fix parent of rbtx4938_fpga_resource.
Instead of one SGI_HAS_HAL2 for IP22 and one for IP28, IP28 got two of
them... Let's give IP22 some ALSA sound, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>[MIPS] IP22, IP28: Fix merge bug
Instead of one SGI_HAS_HAL2 for IP22 and one for IP28, IP28 got two of
them... Let's give IP22 some ALSA sound, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
[MIPS] Tinker with constraints in <asm/atomic.h> to fix build error.
[...]
CC init/main.o
include/asm/bitops.h: In function `start_kernel':
include/asm/bitops.h:76: warning: asm operand 2 probably doesn't match
constraints
include/asm/bitops.h:76: warning: asm operand 2 probably doesn't match
constraints
include/asm/bitops.h:76: warning: asm operand 2 probably doesn't match
constraints
include/asm/bitops.h:76: error: impossible constraint in `asm'
include/asm/bitops.h:76: error: impossible constraint in `asm'
include/asm/bitops.h:76: error: impossible constraint in `asm'
make[1]: *** [init/main.o] Error 1
[...]
The build error is caused by the ages old gcc bug where gcc at the time of
analyzing the constraints is unable to figure out that an "i" constraint
actually can be satisfied and thus will abort unless an "r" is added to
the constraint. For the actual code generation gcc will only ever use the
"i" constraint.
Dmitri Vorobiev [Tue, 15 Jul 2008 16:57:31 +0000 (19:57 +0300)]
[MIPS] Fix missing prototypes in asm/fpu.h
While building the Malta defconfig, sparse spat the following
warnings:
>>>>>>>>>>>>>>>>>>
arch/mips/math-emu/kernel_linkage.c:31:6: warning: symbol
'fpu_emulator_init_fpu' was not declared. Should it be static?
arch/mips/math-emu/kernel_linkage.c:54:5: warning: symbol
'fpu_emulator_save_context' was not declared. Should it be
static?
arch/mips/math-emu/kernel_linkage.c:68:5: warning: symbol
'fpu_emulator_restore_context' was not declared. Should it be
static?
>>>>>>>>>>>>>>>>>>
This patch fixes these errors by adding the proper prototypes
to the include/asm-mips/fpu.h header, and actually using this
header in the sparse-spotted source file.
Build-tested with Malta defconfig.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2c
Currently, saa7134 is dependent of ir-kbd-i2c, since it uses a symbol that is
defined there. However, as this symbol is used only on saa7134, there's no
sense on keeping it defined there (or on ir-commons).
So, let's move it to saa7134 and remove one symbol for being exported.
projects / linux-2.6 / log