[PATCH] Mark struct super_operations const

This patch is inspired by Arjan's "Patch series to mark struct
file_operations and struct inode_operations const".

Compile tested with gcc & sparse.

Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct inode_operations const 3

Many struct inode_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct inode_operations const 2

Many struct inode_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct inode_operations const 1

Many struct inode_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct file_operations const 9

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct file_operations const 8

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct file_operations const 7

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct file_operations const 6

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct file_operations const 5

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct file_operations const 4

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

[akpm@sdl.org: dvb fix]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct file_operations const 3

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct file_operations const 2

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

[akpm@osdl.org: sparc64 fix]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mark struct file_operations const 1

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ps3: ps3av/fb defconfig updates

PS3: defconfig updates for ps3av and ps3fb

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ps3: cleanup ps3fb before clearing HPTE

PS3: Cleanup the frame buffer device before clearing the HPTE mapping

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ps3: disable display flipping during mode changes

If ps3fb is available, we have to disable display flipping while changing the
audio or video mode.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ps3: Virtual Frame Buffer Driver

Add the PS3 Virtual Frame Buffer Driver.

As the actual graphics hardware cannot be accessed directly by Linux, ps3fb
uses a virtual frame buffer in main memory.  The actual screen image is copied
to graphics memory by the GPU on every vertical blank, by making a hypervisor
call.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ps3: Preallocate bootmem memory for ps3fb

Preallocate bootmem memory for the PS3 frame buffer device, which needs a
large block of physically-contiguous memory. The size of this memory block is
configurable:
  - The config option CONFIG_FB_PS3_DEFAULT_SIZE_M allows to specify the
    default amount of memory (in MiB) allocated to the virtual frame buffer.
  - The early boot parameter `ps3fb=xxx' allows to override the default value.
    It will be rounded up to a multiple of 1 MiB, if needed.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fb_videomode_to_var: reset virtual screen parameters

fb_videomode_to_var(): reset the virtual screen parameters when converting
from an fb_videomode to an fb_var_screeninfo.

Without this the old virtual screen parameters are kept.  Hence you cannot
switch to a video mode with a lower resolution on frame buffer devices that
don't support virtual screens and panning, as values are not supposed to be
rounded down when they don't fit.

I also reordered the assignments to match the order of the individual members.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fbdev modedb: make more pointer parameters const

fbdev modedb: make more input and output pointer parameters const

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fbdev modedb: allow refresh rates for named video modes

fbdev modedb: Take into account the specified refresh rates for video modes
specified by name, so e.g.  all of `720p', `720p@60', and `720p@50' work.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ps3: AV Settings Driver

Add the PS3 AV Settings Driver.

The AV Settings driver is used to control Audio and Video settings.  It
communicates with the policy manager through the virtual uart.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ps3: add shutdown to virtual uart port driver framework

PS3: Add a shutdown method to the PS3's virtual uart port driver framework

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] change nvidiafb_remove to __devexit

Change nvidiafb_remove to __devexit to fix MODPOST warnings:

WARNING: drivers/video/nvidia/nvidiafb.o - Section mismatch: reference to
.exit.text:nvidiafb_remove from .data.rel.local after 'nvidiafb_driver' (at
offset 0x28)

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-By: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Video: fb, kzalloc changes

Use kzalloc instead of kmalloc + memset(0).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Video: fb, add true ref_count atomicity

Some of fb drivers uses atomic_t in bad manner, since there are still some
race-prone gaps.  Use mutexes to protect open/close code sections with
ref_count testing and finally use simple uint.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Denis Oliver Kropp <dok@directfb.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] remove the broken FB_S3TRIO driver

The FB_S3TRIO driver:
- has been marked as BROKEN for more than two years and
- is still marked as BROKEN.

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: James Simmons <jsimmons@infradead.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] matroxfb: Use kzalloc

Use kzalloc instead of kmalloc+memset, twice.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Acked-By: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] drivers/video/sis: Convert to generic boolean

Convert:
FALSE   -> false
TRUE    -> true
BOOLEAN -> bool

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Cc: Thomas Hellstrom <thomas@tungstengraphics.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] pm3fb: kill pci_find_device usage

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Correct apparent typo CONFIG_ATY_CT in ATY video

Replace the apparent typo CONFIG_ATY_CT with CONFIG_FB_ATY_CT.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Ville Syrjala <syrjala@sci.fi>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Recognize video=gx1fb:... option

Juergen Beisert reported that the following option doesn't work for him

video=gx1fb:1024x768-16@60

though sisfb was able to parse similar option correctly.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] proper prototype for tosh_smm()

Add a proper prototype for tosh_smm() to include/linux/toshiba.h

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] cyber2010 framebuffer on ARM Netwinder fix

The Netwinder machines with Cyber2010 crash badly when starting Xserver.
The workaround is to disable pci burst option for this revision of video
chip.

[akpm@osdl.org: cleanup]
Signed-off-by: Woody Suwalski <woodys@xandros.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] remove bogus con_is_present() prototypes

Although gcc seems to accept "extern" prototypes after it has seen the
"static inline" function, that's not really correct.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tgafb: Fix the PCI ID table

The end marker is missing from the driver's PCI ID table.  This set of
changes adds the marker, switches to using PCI_DEVICE() and records the
table for the use in a module.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tgafb: sync-on-green support fixes

This sets up the deep register of the TGA ASIC as well as the blank pedestal
of the Bt463 RAMDAC correctly for the sync-on-green mode.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tgafb: module support fixes

This is a set of clean-ups for the module support in the driver -- __devinit
and __devexit classifiers are now specified correctly, initialization
functions are marked static and a few unnecessary #ifdefs are removed.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tgafb: fix the mode register setting

There is no need to set the GE bit (Win32 compatibility) in the mode register;
it shall get cleared with the next subsequent update to the register anyway.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tgafb: support the DirectColor visual

 The 32-plane variations of the TGA use the Bt463 RAMDAC and are therefore
DirectColor rather than TrueColor adapters.  This is a set of changes to
implement the necessary bits to support this model.  A couple of fixes to fix
accesses to the RAMDAC are included as a side-effect.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tgafb: fix copying overlapping areas

The direction of copying in the copyarea functions is selected incorrectly,
resulting in corruption.  This is a fix.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tgafb: switch to framebuffer_alloc()

This is a set of changes to update the driver to the framebuffer_alloc() API.
Included, there is also a fix to a memory leak due to the colour map
allocation not being freed upon driver's removal.  Aside from the fix there
are no functional changes.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] remove broken video drivers

Remove some video drivers that:

- had already been marked as BROKEN in 2.6.0 three years ago and
- are still marked as BROKEN.

These are the following drivers:
- FB_CYBER
- FB_VIRGE
- FB_RETINAZ3
- FB_SUN3

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive any of these drivers, the code is
still present in the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-By: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fbdev driver for S3 Trio/Virge

Add a driver for S3 Trio / S3 Virge.  Driver is tested with most versions
of S3 Trio and with S3 Virge/DX, on i386.

(akpm: We kind-of have support for this hardware already, but...

virgefb.c
  - amiga/zorro specific,
  - broken (according to Kconfig),
  - uses obsolete/nonexistent interface (struct display_switch)
  - recent Adrian Bunk's patch removes this driver

S3triofb.c
  - ppc/openfirmware specific
  - minimal functionality
  - broken (according to Kconfig),
  - uses obsolete/nonexistent interface (struct display_switch)
)

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] KVM: Host suspend/resume support

Add the necessary callbacks to suspend and resume a host running kvm.  This is
just a repeat of the cpu hotplug/unplug work.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] KVM: cpu hotplug support

On hotplug, we execute the hardware extension enable sequence.  On unplug, we
decache any vcpus that last ran on the exiting cpu, and execute the hardware
extension disable sequence.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] KVM: VMX: add vcpu_clear()

Like the inline code it replaces, this function decaches the vmcs from the cpu
it last executed on.  in addition:

 - vcpu_clear() works if the last cpu is also the cpu we're running on
 - it is faster on larger smps by virtue of using smp_call_function_single()

Includes fix from Ingo Molnar.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] KVM: Add a global list of all virtual machines

This will allow us to iterate over all vcpus and see which cpus they are
running on.

[akpm@osdl.org: use standard (ugly) initialisers]
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU

The following patchset allows a host with running virtual machines to be
suspended and, on at least a subset of the machines tested, resumed.  Note
that this is orthogonal to suspending and resuming an individual guest to a
file.

A side effect of implementing suspend/resume is that cpu hotplug is now
supported.  This should please the owners of big iron.

This patch:

KVM wants the cpu hotplug notifications, both for cpu hotplug itself, but more
commonly for host suspend/resume.

In order to avoid extensive #ifdefs, provide stubs when CONFIG_CPU_HOTPLUG is
not defined.

In all, we have four cases:

- UP: register and unregister stubbed out
- SMP+hotplug: full register and unregister
- SMP, no hotplug, core: register as __init, unregister stubbed
      (cpus are brought up during core initialization)
- SMP, no hotplug, module: register and unregister stubbed out
      (cpus cannot be brought up during module lifetime)

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: fix vcpu freeing bug

vcpu_load() can return NULL and it sometimes does in failure paths (for
example when the userspace ABI version is too old) - causing a preemption
count underflow in the ->vcpu_free() later on.  So check for NULL.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: Fix mismatch between 32-bit and 64-bit abi

Unfortunately requiring a version bump.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: VMX: Reload ds and es even in 64-bit mode

Or 32-bit userspace will get confused.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: Two-way apic tpr synchronization

We report the value of cr8 to userspace on an exit.  Also let userspace change
cr8 when we re-enter the guest.  The lets 64-bit guest code maintain the tpr
correctly.

Thanks for Yaniv Kamay for the idea.

Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: SVM: Hack initial cpu csbase to be consistent with intel

This allows us to run the mmu testsuite on amd.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: Fix mmu going crazy of guest sets cr0.wp == 0

The kvm mmu relies on cr0.wp being set even if the guest does not set it.  The
vmx code correctly forces cr0.wp at all times, the svm code does not, so it
can't boot solaris without this patch.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: vmx: handle triple faults by returning EXIT_REASON_SHUTDOWN to userspace

Just like svm.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: Fix gva_to_gpa()

gva_to_gpa() needs to be updated to the new walk_addr() calling convention,
otherwise it may oops under some circumstances.

Use the opportunity to remove all the code duplication in gva_to_gpa(), which
essentially repeats the calculations in walk_addr().

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: Fix asm constraint for lldt instruction

lldt does not accept immediate operands, which "g" allows.

Signed-off-by: S.Caglar Onur <caglar@pardus.org.tr>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kvm: optimize inline assembly

Forms like "0(%rsp)" generate an instruction with an unnecessary one byte
displacement under certain circumstances.  replace with the equivalent
"(%rsp)".

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ufs2 write: block allocation update

Patch adds ability to work with 64bit metadata, this made by replacing work
with 32bit pointers by inline functions.

Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ufs2 write: inodes write

This patch adds into write inode path function to write UFS2 inode, and
modifys allocate inode path to allocate and init additional inode chunks.

Also some cleanups:
- remove not used parameters in some functions
- remove i_gen field from ufs_inode_info structure,
there is i_generation in inode structure with same purposes.

Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ufs2 write: mount as rw

These series of patches add UFS2 write-support.  UFS2 - is default file system
for recent versions of FreeBSD.

The main differences from UFS1 from write support point of view
are:
1)Not all inodes are allocated during formatation of disk.
2)All meta-data(pointer to data blocks) are 64bit(in UFS1 they
are 32bit).

So patch series consist of
1)make possible mount UFS2 in read-write mode
2)code to write ufs2 inodes and code to initialize inodes chunks.
3)work with 64bit meta-data

I made simple testing like create/deleting/writing/reading/truncating, also I
ran fsx-linux and untar and build kernel on UFS1 and UFS2, after that FreeBSD
fsck do not find any errors in fs.

This patch makes possible to mount ufs2 "rw", and updates UFS2 documentation:
remove note about bug(it fixed by reallocate blocks on the fly patch) and add
me in the list of people who want receive bug reports.

Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ia64: 2048-byte command line

Current implementation allows the kernel to receive up to 255 characters from
the bootloader.  While the boot protocol allows greater buffers to be sent.

In current environment, the command-line is used in order to specify many
values, including suspend/resume, module arguments, splash, initramfs and
more.

255 characters are not enough anymore.

After edd issue was fixed, and dynammic kernel command-line patch was
accepted, we can extend the COMMAND_LINE_SIZE without runtime memory
requirements.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] x86_64: 2048-byte command line

Current implementation allows the kernel to receive up to 255 characters from
the bootloader.  While the boot protocol allows greater buffers to be sent.

In current environment, the command-line is used in order to specify many
values, including suspend/resume, module arguments, splash, initramfs and
more.

255 characters are not enough anymore.

After edd issue was fixed, and dynammic kernel command-line patch was
accepted, we can extend the COMMAND_LINE_SIZE without runtime memory
requirements.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386: 2048-byte command line

Current implementation allows the kernel to receive up to 255 characters from
the bootloader.  While the boot protocol allows greater buffers to be sent.

In current environment, the command-line is used in order to specify many
values, including suspend/resume, module arguments, splash, initramfs and
more.

255 characters are not enough anymore.

After edd issue was fixed, and dynammic kernel command-line patch was
accepted, we can extend the COMMAND_LINE_SIZE without runtime memory
requirements.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: fixups

Remove in-source externs, linux/init.h is included in all cases.
This is a fixups for "Dynamic kernel command-line" patch.

It also includes some uml __init fixups so that we can __initdata also its
command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: xtensa

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: x86_64

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: v850

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: um

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: sparc64

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: sparc

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: sh64

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: sh

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: s390

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: ppc

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: powerpc

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: parisc

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: mips

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: m68knommu

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: m68k

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: m32r

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: ia64

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

[akpm@osdl.org: move some declarations to the right place]
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: i386

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: h8300

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: frv

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: cris

1. Rename saved_command_line into boot_command_line.
2. Set cris_command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: avr32

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: arm26

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: arm

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: alpha

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Dynamic kernel command-line: common

Current implementation stores a static command-line buffer allocated to
COMMAND_LINE_SIZE size.  Most architectures stores two copies of this buffer,
one for future reference and one for parameter parsing.

Current kernel command-line size for most architecture is much too small for
module parameters, video settings, initramfs paramters and much more.  The
problem is that setting COMMAND_LINE_SIZE to a grater value, allocates static
buffers.

In order to allow a greater command-line size, these buffers should be
dynamically allocated or marked as init disposable buffers, so unused memory
can be released.

This patch renames the static saved_command_line variable into
boot_command_line adding __initdata attribute, so that it can be disposed
after initialization.  This rename is required so applications that use
saved_command_line will not be affected by this change.

It reintroduces saved_command_line as dynamically allocated buffer to match
the data in boot_command_line.

It also mark secondary command-line buffer as __initdata, and copies it to
dynamically allocated static_command_line buffer components may hold reference
to it after initialization.

This patch is for linux-2.6.20-rc4-mm1 and is divided to target each
architecture.  I could not check this in any architecture so please forgive me
if I got it wrong.

The per-architecture modification is very simple, use boot_command_line in
place of saved_command_line.  The common code is the change into dynamic
command-line.

This patch:

1. Rename saved_command_line into boot_command_line, mark as init
   disposable.

2. Add dynamic allocated saved_command_line.

3. Add dynamic allocated static_command_line.

4. During startup copy: boot_command_line into saved_command_line.  arch
   command_line into static_command_line.

5. Parse static_command_line and not arch command_line, so arch
   command_line may be freed.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sched: avoid div in rebalance_tick

Avoid expensive integer divide 3 times per CPU per tick.

A userspace test of this loop went from 26ns, down to 19ns on a G5; and
from 123ns down to 28ns on a P3.

(Also avoid a variable bit shift, as suggested by Alan. The effect
of this wasn't noticable on the CPUs I tested with).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] eCryptfs: add flush_dcache_page() calls

Call flush_dcache_page() after modifying a pagecache by hand.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] eCryptfs: open-code flag checking and manipulation

Open-code flag checking and manipulation.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Trevor Highland <tshighla@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] eCryptfs: convert kmap() to kmap_atomic()

Replace kmap() with kmap_atomic().  Reduce the amount of time that mappings
are held.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Trevor Highland <tshighla@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] eCryptfs: convert f_op->write() to vfs_write()

sys_write() takes a local copy of f_pos and writes that back
into the struct file. It does this so that two concurrent write()
callers don't make a mess of f_pos, and of the file contents.

ecryptfs should be calling vfs_write().  That way we also get the fsnotify
notifications, which ecryptfs presently appears to have subverted.

Convert direct calls to f_op->write() into calls to vfs_write().

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] eCryptfs: Encrypted passthrough

Provide an option to provide a view of the encrypted files such that the
metadata is always in the header of the files, regardless of whether the
metadata is actually in the header or in the extended attribute.  This mode of
operation is useful for applications like incremental backup utilities that do
not preserve the extended attributes when directly accessing the lower files.

With this option enabled, the files under the eCryptfs mount point will be
read-only.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] eCryptfs: Generalize metadata read/write

Generalize the metadata reading and writing mechanisms, with two targets for
now: metadata in file header and metadata in the user.ecryptfs xattr of the
lower file.

[akpm@osdl.org: printk warning fix]
[bunk@stusta.de: make some needlessly global code static]
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] eCryptfs: xattr flags and mount options

This patch set introduces the ability to store cryptographic metadata into an
lower file extended attribute rather than the lower file header region.

This patch set implements two new mount options:

ecryptfs_xattr_metadata
 - When set, newly created files will have their cryptographic
   metadata stored in the extended attribute region of the file rather
   than the header.

   When storing the data in the file header, there is a minimum of 8KB
   reserved for the header information for each file, making each file at
   least 12KB in size.  This can take up a lot of extra disk space if the user
   creates a lot of small files.  By storing the data in the extended
   attribute, each file will only occupy at least of 4KB of space.

   As the eCryptfs metadata set becomes larger with new features such as
   multi-key associations, most popular filesystems will not be able to store
   all of the information in the xattr region in some cases due to space
   constraints.  However, the majority of users will only ever associate one
   key per file, so most users will be okay with storing their data in the
   xattr region.

   This option should be used with caution.  I want to emphasize that the
   xattr must be maintained under all circumstances, or the file will be
   rendered permanently unrecoverable.  The last thing I want is for a user to
   forget to set an xattr flag in a backup utility, only to later discover
   that their backups are worthless.

ecryptfs_encrypted_view
 - When set, this option causes eCryptfs to present applications a
   view of encrypted files as if the cryptographic metadata were
   stored in the file header, whether the metadata is actually stored
   in the header or in the extended attributes.

   No matter what eCryptfs winds up doing in the lower filesystem, I want
   to preserve a baseline format compatibility for the encrypted files.  As of
   right now, the metadata may be in the file header or in an xattr.  There is
   no reason why the metadata could not be put in a separate file in future
   versions.

   Without the compatibility mode, backup utilities would have to know to
   back up the metadata file along with the files.  The semantics of eCryptfs
   have always been that the lower files are self-contained units of encrypted
   data, and the only additional information required to decrypt any given
   eCryptfs file is the key.  That is what has always been emphasized about
   eCryptfs lower files, and that is what users expect.  Providing the
   encrypted view option will provide a way to userspace applications wherein
   they can always get to the same old familiar eCryptfs encrypted files,
   regardless of what eCryptfs winds up doing with the metadata behind the
   scenes.

This patch:

Add extended attribute support to version bit vector, flags to indicate when
xattr or encrypted view modes are enabled, and support for the new mount
options.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>