Yinghai Lu [Tue, 19 Feb 2008 11:21:06 +0000 (03:21 -0800)]
x86: get boot_cpu_id as early for k8_scan_nodes
When acpi=off or there is no SRAT defined, apicid_to_node is got from K8
Northbridge PCI configuration space in k8_scan_nodes() in
arch/x86_64/mm/k8toplogy.c.
The problem is that it assumes bsp apic id is 0 at that point.
For four socket system with Quad core cpus installed, all cpus apic id
is offset by 4, and bsp apic id is 4.
For eight socket system with dual core cpus installed, all cpus apic id
is offset by 2, and bsp apic id is 2.
We need get boot_cpu_id --- bsp apic id, before k8_scan_nodes by called.
So create early_acpi_boot_init and early_get_smp_config for get boot_cpu_id.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
<asm-x86/nops.h> describes certain multibyte instructions as
"generic" nops when in fact they aren't nops at all in 64-bit
mode (missing REX.W causing truncation of a register).
Update the comment to state that K8 or P6 style nops should be
used in 64-bit mode. This matches what the alternatives code does.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jan Beulich [Mon, 10 Mar 2008 13:11:17 +0000 (13:11 +0000)]
x86: prevent unconditional writes to DebugCtl MSR
Otherwise, enabling (or better, subsequent disabling) of single
stepping would cause a kernel oops on CPUs not having this MSR.
The patch could have been added a conditional to the MSR write in
user_disable_single_step(), but centralizing the updates seems safer
and (looking forward) better manageable.
Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix a memcpy that should be a text_poke (in apply_alternatives).
Use kernel_wp_save/kernel_wp_restore in text_poke to support DEBUG_RODATA
correctly and so the CPU HOTPLUG special case can be removed.
Add text_poke_early, for alternatives and paravirt boot-time and module load
time patching.
Changelog:
- Fix text_set and text_poke alignment check (mixed up bitwise and and or)
- Remove text_set
- Export add_nops, so it can be used by others.
- Document text_poke_early.
- Remove clflush, since it breaks some VIA architectures and is not strictly
necessary.
- Add kerneldoc to text_poke and text_poke_early.
- Create a second vmap instead of using the WP bit to support Xen and VMI.
- Move local_irq disable within text_poke and text_poke_early to be able to
be sleepable in these functions.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Andi Kleen <andi@firstfloor.org> CC: pageexec@freemail.hu CC: H. Peter Anvin <hpa@zytor.com> CC: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Mon, 3 Mar 2008 17:13:12 +0000 (14:13 -0300)]
x86: unify setup_trampoline
setup_trampoline() looks very similar between architectures, and this
patch unifies them. The i386 version allocates bootmem memory, while
the x86_64 version uses a fixed address.
In this patch, we initialize the global trampoline_base to the x86_64 version,
and i386 allocation can later override it.
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Mon, 3 Mar 2008 17:12:47 +0000 (14:12 -0300)]
x86: change x86_64 smp_call_function_mask to look alike i386
the two versions (the inner version, and the outer version, that takes
the locks) of smp_call_function_mask are made into one. With the changes,
i386 and x86_64 versions look exactly the same.
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Mon, 3 Mar 2008 17:12:45 +0000 (14:12 -0300)]
x86: create smpcommon.c
This patch creates smpcommon.c with functions that are
equal between architectures. The i386-only init_gdt
is ifdef'd.
Note that smpcommon.o figures twice in the Makefile:
this is because sub-architectures like voyager that does
not use the normal smp_$(BITS) files also have to access them
Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 5 Mar 2008 09:46:38 +0000 (10:46 +0100)]
x86: fix switch_to() clobbers
Liu Pingfan noticed that switch_to() clobbers more registers than its
asm constraints specify.
We get away with this due to luck mostly - schedule()
by its nature only has 'local' state which gets reloaded
automatically. Fix it nevertheless, we could hit this anytime.
it turns out that with the extra constraints gcc manages to make
schedule() even more compact:
text data bss dec hex filename
28626 684 2640 31950 7cce sched.o.before
28613 684 2640 31937 7cc1 sched.o.after
Reported-by: Liu Pingfan <kernelfans@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: reserve end-of-conventional-memory to 1MB, 64-bit, use paravirt_enabled
Jeremy Fitzhardinge pointed out that looking at the boot_params
struct to determine if the system is running in a paravirtual
environment is not reliable for the Xen case, currently. He also
points out that there already exists a function to determine if
the system is running in a paravirtual environment. So let's use
that instead. This gets rid of the preprocessor test too.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: reserve end-of-conventional-memory to 1MB, 32-bit, use paravirt_enabled
Jeremy Fitzhardinge pointed out that looking at the boot_params
struct to determine if the system is running in a paravirtual
environment is not reliable for the Xen case, currently. He also
points out that there already exists a function to determine if
the system is running in a paravirtual environment. So let's use
that instead. This gets rid of the preprocessor test too.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rusty Russell [Tue, 4 Mar 2008 12:07:50 +0000 (23:07 +1100)]
x86: if we cannot calibrate the TSC, we panic.
The current tsc_init() clears the TSC feature bit if the TSC khz
cannot be calculated, causing us to panic in
arch/x86/kernel/cpu/bugs.c check_config(). We should simply mark it
unstable.
Frankly, someone should take an axe to this code. mark_tsc_unstable()
not only marks it unstable, but sets tsc_enabled to 0, which seems
redundant but is actually important here because means it won't be
used by sched_clock() either. Perhaps a tristate enum "UNUSABLE,
UNSTABLE, OK" would be clearer, and separate mark_tsc_unstable() and
mark_tsc_broken() functions?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: reserve end-of-conventional-memory to 1MB, 64-bit
This patch is an add-on to the 64-bit ebda patch. It makes
the functions reserve_ebda_region (renamed from reserve_ebda)
and copy_e820_map equal to the 32-bit versions of the previous
patch.
Changes:
Use u64 and u32 for local variables in copy_e820_map.
The amount of conventional memory and the start of the EBDA are
detected by reading the BIOS data area directly. Paravirtual
environments do not provide this area, so we bail out early
in that case. They will just have to set up a correct memory
map to start with.
Add a safety net for zeroed out BIOS data area.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: reserve_early end-of-conventional-memory to 1MB, 64-bit
Explicitly reserve_early the whole address range from the end of
conventional memory as reported by the bios data area up to the
1Mb mark. Regard the info retrieved from the BIOS data area with
a bit of paranoia, though, because some biosses forget to register
the EBDA correctly.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: reserve end-of-conventional-memory to 1MB on 32-bit
This patch adds explicit detection of the EBDA and reservation
of the rom and adapter address space 0xa0000-0x100000 to the
i386 kernels. Before this patch, the EBDA size was hardcoded
as 4Kb. Also, the reservation of the adapter range was done by
modifying the e820 map which is now not necessary any longer,
and that code is removed from copy_e820_map.
The amount of conventional memory and the start of the EBDA are
detected by reading the BIOS data area directly. Paravirtual
environments do not provide this area, so we bail out early
in that case. They will just have to set up a correct memory
map to start with.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Roman Zippel [Fri, 29 Feb 2008 04:09:02 +0000 (05:09 +0100)]
x86: fix recursive dependencies
The proper dependency check uncovered a few dependency problems,
the subarchitecture used a mixture of selects and depends on SMP
and PCI dependency was messed up.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
projects / linux-2.6 / log