Kevin Coffman [Tue, 29 Apr 2008 08:01:22 +0000 (01:01 -0700)]
keys: check starting keyring as part of search
Check the starting keyring as part of the search to (a) see if that is what
we're searching for, and (b) to check it is still valid for searching.
The scenario: User in process A does things that cause things to be created in
its process session keyring. The user then does an su to another user and
starts a new process, B. The two processes now share the same process session
keyring.
Process B does an NFS access which results in an upcall to gssd. When gssd
attempts to instantiate the context key (to be linked into the process session
keyring), it is denied access even though it has an authorization key.
The order of calls is:
keyctl_instantiate_key()
lookup_user_key() (the default: case)
search_process_keyrings(current)
search_process_keyrings(rka->context) (recursive call)
keyring_search_aux()
keyring_search_aux() verifies the keys and keyrings underneath the top-level
keyring it is given, but that top-level keyring is neither fully validated nor
checked to see if it is the thing being searched for.
This patch changes keyring_search_aux() to:
1) do more validation on the top keyring it is given and
2) check whether that top-level keyring is the thing being searched for
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Paul Moore <paul.moore@hp.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Kevin Coffman <kwc@citi.umich.edu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Tue, 29 Apr 2008 08:01:19 +0000 (01:01 -0700)]
keys: increase the payload size when instantiating a key
Increase the size of a payload that can be used to instantiate a key in
add_key() and keyctl_instantiate_key(). This permits huge CIFS SPNEGO blobs
to be passed around. The limit is raised to 1MB. If kmalloc() can't allocate
a buffer of sufficient size, vmalloc() will be tried instead.
Signed-off-by: David Howells <dhowells@redhat.com> Cc: Paul Moore <paul.moore@hp.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Kevin Coffman <kwc@citi.umich.edu> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WANG Cong [Tue, 29 Apr 2008 08:01:18 +0000 (01:01 -0700)]
elf: fix shadowed variables in fs/binfmt_elf.c
Fix these sparse warings:
fs/binfmt_elf.c:1749:29: warning: symbol 'tmp' shadows an earlier one
fs/binfmt_elf.c:1734:28: originally declared here
fs/binfmt_elf.c:2009:26: warning: symbol 'vma' shadows an earlier one
fs/binfmt_elf.c:1892:24: originally declared here
[akpm@linux-foundation.org: chose better variable name] Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robert P. J. Day [Tue, 29 Apr 2008 08:01:14 +0000 (01:01 -0700)]
ipmi: make comment match actual preprocessor check
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lots of style fixes for the miscellaneous IPMI files. No functional
changes. Basically fixes everything reported by checkpatch and fixes the
comment style.
Lots of style fixes for the IPMI system interface driver. No functional
changes. Basically fixes everything reported by checkpatch and fixes the
comment style.
Convert the #defines for statistics into an enum in the IPMI system interface
and remove the unused timeout_restart statistic. And comment what these
statistics mean.
Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "run_to_completion" mode was somewhat broken. Locks need to be avoided in
run_to_completion mode, and it shouldn't be used by normal users, just
internally for panic situations.
This patch removes locks in run_to_completion mode and removes the user call
for setting the mode. The only user was the poweroff code, but it was easily
converted to use the polling interface.
CLONE_NEWIPC|CLONE_SYSVSEM interaction isn't handled properly. This can cause
a kernel memory corruption. CLONE_NEWIPC must detach from the existing undo
lists.
Fix, part 3: refuse clone(CLONE_SYSVSEM|CLONE_NEWIPC).
With unshare, specifying CLONE_SYSVSEM means unshare the sysvsem. So it seems
reasonable that CLONE_NEWIPC without CLONE_SYSVSEM would just imply
CLONE_SYSVSEM.
However with clone, specifying CLONE_SYSVSEM means *share* the sysvsem. So
calling clone(CLONE_SYSVSEM|CLONE_NEWIPC) is explicitly asking for something
we can't allow. So return -EINVAL in that case.
[akpm@linux-foundation.org: cleanups] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Pierre Peiffer <peifferp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc: sysvsem: force unshare(CLONE_SYSVSEM) when CLONE_NEWIPC
sys_unshare(CLONE_NEWIPC) doesn't handle the undo lists properly, this can
cause a kernel memory corruption. CLONE_NEWIPC must detach from the existing
undo lists.
Fix, part 2: perform an implicit CLONE_SYSVSEM in CLONE_NEWIPC. CLONE_NEWIPC
creates a new IPC namespace, the task cannot access the existing semaphore
arrays after the unshare syscall. Thus the task can/must detach from the
existing undo list entries, too.
This fixes the kernel corruption, because it makes it impossible that
undo records from two different namespaces are in sysvsem.undo_list.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Pierre Peiffer <peifferp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sys_unshare(CLONE_NEWIPC) doesn't handle the undo lists properly, this can
cause a kernel memory corruption. CLONE_NEWIPC must detach from the existing
undo lists.
Fix, part 1: add support for sys_unshare(CLONE_SYSVSEM)
The original reason to not support it was the potential (inevitable?)
confusion due to the fact that sys_unshare(CLONE_SYSVSEM) has the
inverse meaning of clone(CLONE_SYSVSEM).
Our two most reasonable options then appear to be (1) fully support
CLONE_SYSVSEM, or (2) continue to refuse explicit CLONE_SYSVSEM,
but always do it anyway on unshare(CLONE_SYSVSEM). This patch does
(1).
Changelog:
Apr 16: SEH: switch to Manfred's alternative patch which
removes the unshare_semundo() function which
always refused CLONE_SYSVSEM.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Pierre Peiffer <peifferp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pierre Peiffer [Tue, 29 Apr 2008 08:00:54 +0000 (01:00 -0700)]
IPC: consolidate all xxxctl_down() functions
semctl_down(), msgctl_down() and shmctl_down() are used to handle the same set
of commands for each kind of IPC. They all start to do the same job (they
retrieve the ipc and do some permission checks) before handling the commands
on their own.
This patch proposes to consolidate this by moving these same pieces of code
into one common function called ipcctl_pre_down().
It simplifies a little these xxxctl_down() functions and increases a little
the maintainability.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pierre Peiffer [Tue, 29 Apr 2008 08:00:51 +0000 (01:00 -0700)]
IPC: introduce ipc_update_perm()
The IPC_SET command performs the same permission setting for all IPCs. This
patch introduces a common ipc_update_perm() function to update these
permissions and makes use of it for all IPCs.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pierre Peiffer [Tue, 29 Apr 2008 08:00:50 +0000 (01:00 -0700)]
IPC: get rid of the use *_setbuf structure.
All IPCs make use of an intermetiate *_setbuf structure to handle the IPC_SET
command. This is not really needed and, moreover, it complicates a little bit
the code.
This patch gets rid of the use of it and uses directly the semid64_ds/
msgid64_ds/shmid64_ds structure.
In addition of removing one struture declaration, it also simplifies and
improves a little bit the common 64-bits path.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pierre Peiffer [Tue, 29 Apr 2008 08:00:49 +0000 (01:00 -0700)]
IPC/semaphores: move the rwmutex handling inside semctl_down
semctl_down is called with the rwmutex (the one which protects the list of
ipcs) taken in write mode.
This patch moves this rwmutex taken in write-mode inside semctl_down.
This has the advantages of reducing a little bit the window during which this
rwmutex is taken, clarifying sys_semctl, and finally of having a coherent
behaviour with [shm|msg]ctl_down
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pierre Peiffer [Tue, 29 Apr 2008 08:00:48 +0000 (01:00 -0700)]
IPC/message queues: introduce msgctl_down
Currently, sys_msgctl is not easy to read.
This patch tries to improve that by introducing the msgctl_down function to
handle all commands requiring the rwmutex to be taken in write mode (ie
IPC_SET and IPC_RMID for now). It is the equivalent function of semctl_down
for message queues.
This greatly changes the readability of sys_msgctl and also harmonizes the way
these commands are handled among all IPCs.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pierre Peiffer [Tue, 29 Apr 2008 08:00:47 +0000 (01:00 -0700)]
IPC/shared memory: introduce shmctl_down
Currently, the way the different commands are handled in sys_shmctl introduces
some duplicated code.
This patch introduces the shmctl_down function to handle all the commands
requiring the rwmutex to be taken in write mode (ie IPC_SET and IPC_RMID for
now). It is the equivalent function of semctl_down for shared memory.
This removes some duplicated code for handling these both commands and
harmonizes the way they are handled among all IPCs.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc: re-enable msgmni automatic recomputing msgmni if set to negative
The enhancement as asked for by Yasunori: if msgmni is set to a negative
value, register it back into the ipcns notifier chain.
A new interface has been added to the notification mechanism:
notifier_chain_cond_register() registers a notifier block only if not already
registered. With that new interface we avoid taking care of the states
changes in procfs.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc: recompute msgmni on ipc namespace creation/removal
Introduce a notification mechanism that aims at recomputing msgmni each time
an ipc namespace is created or removed.
The ipc namespace notifier chain already defined for memory hotplug management
is used for that purpose too.
Each time a new ipc namespace is allocated or an existing ipc namespace is
removed, the ipcns notifier chain is notified. The callback routine for each
registered ipc namespace is then activated in order to recompute msgmni for
that namespace.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc: invoke the ipcns notifier chain as a work item
Make the memory hotplug chain's mutex held for a shorter time: when memory is
offlined or onlined a work item is added to the global workqueue. When the
work item is run, it notifies the ipcns notifier chain with the
IPCNS_MEMCHANGED event.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce the registration of a callback routine that recomputes msg_ctlmni
upon memory add / remove.
A single notifier block is registered in the hotplug memory chain for all the
ipc namespaces.
Since the ipc namespaces are not linked together, they have their own
notification chain: one notifier_block is defined per ipc namespace.
Each time an ipc namespace is created (removed) it registers (unregisters) its
notifier block in (from) the ipcns chain. The callback routine registered in
the memory chain invokes the ipcns notifier chain with the IPCNS_LOWMEM event.
Each callback routine registered in the ipcns namespace, in turn, recomputes
msgmni for the owning namespace.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc: define the slab_memory_callback priority as a constant
This is a trivial patch that defines the priority of slab_memory_callback in
the callback chain as a constant. This is to prepare for next patch in the
series.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since all the namespaces see the same amount of memory (the total one) this
patch introduces a new variable that counts the ipc namespaces and divides
msg_ctlmni by this counter.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On large systems we'd like to allow a larger number of message queues. In
some cases up to 32K. However simply setting MSGMNI to a larger value may
cause problems for smaller systems.
The first patch of this series introduces a default maximum number of message
queue ids that scales with the amount of lowmem.
Since msgmni is per namespace and there is no amount of memory dedicated to
each namespace so far, the second patch of this series scales msgmni to the
number of ipc namespaces too.
Since msgmni depends on the amount of memory, it becomes necessary to
recompute it upon memory add/remove. In the 4th patch, memory hotplug
management is added: a notifier block is registered into the memory hotplug
notifier chain for the ipc subsystem. Since the ipc namespaces are not linked
together, they have their own notification chain: one notifier_block is
defined per ipc namespace. Each time an ipc namespace is created (removed) it
registers (unregisters) its notifier block in (from) the ipcns chain. The
callback routine registered in the memory chain invokes the ipcns notifier
chain with the IPCNS_MEMCHANGE event. Each callback routine registered in the
ipcns namespace, in turn, recomputes msgmni for the owning namespace.
The 5th patch makes it possible to keep the memory hotplug notifier chain's
lock for a lesser amount of time: instead of directly notifying the ipcns
notifier chain upon memory add/remove, a work item is added to the global
workqueue. When activated, this work item is the one who notifies the ipcns
notifier chain.
Since msgmni depends on the number of ipc namespaces, it becomes necessary to
recompute it upon ipc namespace creation / removal. The 6th patch uses the
ipc namespace notifier chain for that purpose: that chain is notified each
time an ipc namespace is created or removed. This makes it possible to
recompute msgmni for all the namespaces each time one of them is created or
removed.
When msgmni is explicitely set from userspace, we should avoid recomputing it
upon memory add/remove or ipcns creation/removal. This is what the 7th patch
does: it simply unregisters the ipcns callback routine as soon as msgmni has
been changed from procfs or sysctl().
Even if msgmni is set by hand, it should be possible to make it back
automatically recomputed upon memory add/remove or ipcns creation/removal.
This what is achieved in patch 8: if set to a negative value, msgmni is added
back to the ipcns notifier chain, making it automatically recomputed again.
This patch:
Compute msg_ctlmni to make it scale with the amount of lowmem. msg_ctlmni is
now set to make the message queues occupy 1/32 of the available lowmem.
Some cleaning has also been done for the MSGPOOL constant: the msgctl man page
says it's not used, but it also defines it as a size in bytes (the code
expresses it in Kbytes).
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pierre Peiffer [Tue, 29 Apr 2008 08:00:35 +0000 (01:00 -0700)]
IPC: use ipc_buildid() directly from ipc_addid()
By continuing to consolidate a little the IPC code, each id can be built
directly in ipc_addid() instead of having it built from each callers of
ipc_addid()
And I also remove shm_addid() in order to have, as much as possible, the
same code for shm/sem/msg.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arthur Kepner [Tue, 29 Apr 2008 08:00:34 +0000 (01:00 -0700)]
IB: expand ib_umem_get() prototype
Add a new parameter, dmasync, to the ib_umem_get() prototype. Use dmasync = 1
when mapping user-allocated CQs with ib_umem_get().
Signed-off-by: Arthur Kepner <akepner@sgi.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jes Sorensen <jes@sgi.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arthur Kepner [Tue, 29 Apr 2008 08:00:32 +0000 (01:00 -0700)]
dma/ia64: update ia64 machvecs, swiotlb.c
Change all ia64 machvecs to use the new dma_*map*_attrs() interfaces.
Implement the old dma_*map_*() interfaces in terms of the corresponding new
interfaces. For ia64/sn, make use of one dma attribute,
DMA_ATTR_WRITE_BARRIER. Introduce swiotlb_*map*_attrs() functions.
Signed-off-by: Arthur Kepner <akepner@sgi.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jes Sorensen <jes@sgi.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arthur Kepner [Tue, 29 Apr 2008 08:00:31 +0000 (01:00 -0700)]
dma: document dma_*map*_attrs() interfaces
Document the new dma_*map*_attrs() functions.
[markn@au1.ibm.com: fix up for dma-add-dma_map_attrs-interfaces and update docs] Signed-off-by: Arthur Kepner <akepner@sgi.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jes Sorensen <jes@sgi.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arthur Kepner [Tue, 29 Apr 2008 08:00:30 +0000 (01:00 -0700)]
dma: add dma_*map*_attrs() interfaces
Introduce new interfaces, dma_*map*_attrs(), for passing architecture-specific
attributes when memory is mapped and unmapped for DMA. Give the interfaces
default implementations which ignore attributes. Also introduce the
dma_{set|get}_attr() interfaces for setting and retrieving individual
attributes. Define one attribute, DMA_ATTR_WRITE_BARRIER, in anticipation of
its use by ia64/sn. Select whether architectures implement arch-specific
versions of the dma_*map*_attrs() interfaces via HAVE_DMA_ATTRS in Kconfig.
[markn@au1.ibm.com: dma_{set,get}_attr() have to be static inline] Signed-off-by: Arthur Kepner <akepner@sgi.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jes Sorensen <jes@sgi.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cpu_hotplug_begin() must be always called under cpu_add_remove_lock, this
means that only one process can be cpu_hotplug.active_writer. So we don't
need the cpu_hotplug.writer_queue, we can wake up the ->active_writer
directly.
workqueues: shrink cpu_populated_map when CPU dies
When cpu_populated_map was introduced, it was supposed that cwq->thread can
survive after CPU_DEAD, that is why we never shrink cpu_populated_map.
This is not very nice, we can safely remove the already dead CPU from the map.
The only required change is that destroy_workqueue() must hold the hotplug
lock until it destroys all cwq->thread's, to protect the cpu_populated_map.
We could make the local copy of cpu mask and drop the lock, but
sizeof(cpumask_t) may be very large.
Also, fix the comment near queue_work(). Unless _cpu_down() happens we do
guarantee the cpu-affinity of the work_struct, and we have users which rely on
this.
Paul Menage [Tue, 29 Apr 2008 08:00:26 +0000 (01:00 -0700)]
Cpuset hardwall flag: add a mem_hardwall flag to cpusets
This flag provides the hardwalling properties of mem_exclusive, without
enforcing the exclusivity. Either mem_hardwall or mem_exclusive is sufficient
to prevent GFP_KERNEL allocations from passing outside the cpuset's assigned
nodes.
Signed-off-by: Paul Menage <menage@google.com> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Tue, 29 Apr 2008 08:00:26 +0000 (01:00 -0700)]
Cpuset hardwall flag: switch cpusets to use the bulk cgroup_add_files() API
Currently the cpusets mem_exclusive flag is overloaded to mean both
"no-overlapping" and "no GFP_KERNEL allocations outside this cpuset".
These patches add a new mem_hardwall flag with just the allocation restriction
part of the mem_exclusive semantics, without breaking backwards-compatibility
for those who continue to use just mem_exclusive. Additionally, the cgroup
control file registration for cpusets is cleaned up to reduce boilerplate.
This patch:
This change tidies up the cpusets control file definitions, and reduces the
amount of boilerplate required to add/change control files in the future.
Signed-off-by: Paul Menage <menage@google.com> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On ia64, this kmalloc() requires order-4 pages. But this is not necessary to
be physically contiguous. For big mem_cgroup, vmalloc is better. For small
ones, kmalloc is used.
[akpm@linux-foundation.org: simplification] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Emelyanov [Tue, 29 Apr 2008 08:00:21 +0000 (01:00 -0700)]
memcgroup: implement failcounter reset
This is a very common requirement from people using the resource accounting
facilities (not only memcgroup but also OpenVZ beancounters). They want to
put the cgroup in an initial state without re-creating it.
For example after re-configuring a group people want to observe how this new
configuration fits the group needs without saving the previous failcnt value.
Merge two resets into one mem_cgroup_reset() function to demonstrate how
multiplexing work.
Besides, I have plans to move the files, that correspond to res_counter to the
res_counter.c file and somehow "import" them into controller. I don't know
how to make it gracefully yet, but merging resets of max_usage and failcnt in
one function will be there for sure.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memcgroup: move memory controller allocations to their own slabs
Move the memory controller data structure page_cgroup to its own slab cache.
It saves space on the system, allocations are not necessarily pushed to order
of 2 and should provide performance benefits. Users who disable the memory
controller can also double check that the memory controller is not allocating
page_cgroup's.
NOTE: Hugh Dickins brought up the issue of whether we want to mark page_cgroup
as __GFP_MOVABLE or __GFP_RECLAIMABLE. I don't think there is an easy answer
at the moment. page_cgroup's are associated with user pages, they can be
reclaimed once the user page has been reclaimed, so it might make sense to
mark them as __GFP_RECLAIMABLE. For now, I am leaving the marking to default
values that the slab allocator uses.
Pavel Emelyanov [Tue, 29 Apr 2008 08:00:18 +0000 (01:00 -0700)]
memcgroups: add a document describing the resource counter abstraction
The resource counter is supposed to facilitate the resource accounting of
arbitrary resource (and it already does this for memory controller).
However, it is about to be used in other resources controllers (swap, kernel
memory, networking, etc), so provide a doc describing how to work with it.
This will eliminate all the possible future duplications in the appropriate
controllers' docs.
Fixed errors pointed out by Randy.
[akpm@linux-foundation.org: fix documentation tpyo] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the mem_cgroup member from mm_struct and instead adds an owner.
This approach was suggested by Paul Menage. The advantage of this approach
is that, once the mm->owner is known, using the subsystem id, the cgroup
can be determined. It also allows several control groups that are
virtually grouped by mm_struct, to exist independent of the memory
controller i.e., without adding mem_cgroup's for each controller, to
mm_struct.
A new config option CONFIG_MM_OWNER is added and the memory resource
controller selects this config option.
This patch also adds cgroup callbacks to notify subsystems when mm->owner
changes. The mm_cgroup_changed callback is called with the task_lock() of
the new task held and is called just prior to changing the mm->owner.
I am indebted to Paul Menage for the several reviews of this patchset and
helping me make it lighter and simpler.
This patch was tested on a powerpc box, it was compiled with both the
MM_OWNER config turned on and off.
After the thread group leader exits, it's moved to init_css_state by
cgroup_exit(), thus all future charges from runnings threads would be
redirected to the init_css_set's subsystem.
Introduce a read_seq() helper in cftype, which uses seq_file to print out
lists. Use it in the devices cgroup. Also split devices.allow into two
files, so now devices.deny and devices.allow are the ones to use to manipulate
the whitelist, while devices.list outputs the cgroup's current whitelist.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Acked-by: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Tue, 29 Apr 2008 08:00:13 +0000 (01:00 -0700)]
cgroups: simplify init_subsys()
We are at system boot and there is only 1 cgroup group (i,e, init_css_set), so
we don't need to run through the css_set linked list. Neither do we need to
run through the task list, since no processes have been created yet.
Also referring to a comment in cgroup.h:
struct css_set
{
...
/*
* Set of subsystem states, one for each subsystem. This array
* is immutable after creation apart from the init_css_set
* during subsystem registration (at boot time).
*/
struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
}
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Reviewed-by: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Tue, 29 Apr 2008 08:00:11 +0000 (01:00 -0700)]
cgroups: use a hash table for css_set finding
When we attach a process to a different cgroup, the css_set linked-list will
be run through to find a suitable existing css_set to use. This patch
implements a hash table for better performance.
The following benchmarks have been tested:
For N in 1, 5, 10, 50, 100, 500, 1000, create N cgroups with one sleeping
task in each, and then move an additional task through each cgroup in
turn.
Implement a cgroup to track and enforce open and mknod restrictions on device
files. A device cgroup associates a device access whitelist with each cgroup.
A whitelist entry has 4 fields. 'type' is a (all), c (char), or b (block).
'all' means it applies to all types and all major and minor numbers. Major
and minor are either an integer or * for all. Access is a composition of r
(read), w (write), and m (mknod).
The root device cgroup starts with rwm to 'all'. A child devcg gets a copy of
the parent. Admins can then remove devices from the whitelist or add new
entries. A child cgroup can never receive a device access which is denied its
parent. However when a device access is removed from a parent it will not
also be removed from the child(ren).
An entry is added using devices.allow, and removed using
devices.deny. For instance
echo 'c 1:3 mr' > /cgroups/1/devices.allow
allows cgroup 1 to read and mknod the device usually known as
/dev/null. Doing
echo a > /cgroups/1/devices.deny
will remove the default 'a *:* mrw' entry.
CAP_SYS_ADMIN is needed to change permissions or move another task to a new
cgroup. A cgroup may not be granted more permissions than the cgroup's parent
has. Any task can move itself between cgroups. This won't be sufficient, but
we can decide the best way to adequately restrict movement later.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix may-be-used-uninitialized warning] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Acked-by: James Morris <jmorris@namei.org> Looks-good-to: Pavel Emelyanov <xemul@openvz.org> Cc: Daniel Hokka Zakrisson <daniel@hozac.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These patches add cgroups read_s64 and write_s64 control file methods (the
signed equivalent of read_u64/write_u64) and use them to implement the
cpu.rt_runtime_us control file in the CFS cgroup subsystem.
This patch:
These are the signed equivalents of the read_u64/write_u64 methods
Signed-off-by: Paul Menage <menage@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Tue, 29 Apr 2008 08:00:04 +0000 (01:00 -0700)]
CGroup API files: move "releasable" to cgroup_debug subsystem
The "releasable" control file provided by the cgroup framework exports the
state of a per-cgroup flag that's related to the notify-on-release feature.
This isn't really generally useful, unless you're trying to debug this
particular feature of cgroups.
This patch moves the "releasable" file to the cgroup_debug subsystem.
Signed-off-by: Paul Menage <menage@google.com> Cc: "Li Zefan" <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "YAMAMOTO Takashi" <yamamoto@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Tue, 29 Apr 2008 07:59:56 +0000 (00:59 -0700)]
CGroup API files: rename read/write_uint methods to read_write_u64
Several people have justifiably complained that the "_uint" suffix is
inappropriate for functions that handle u64 values, so this patch just renames
all these functions and their users to have the suffic _u64.
[peterz@infradead.org: build fix] Signed-off-by: Paul Menage <menage@google.com> Cc: "Li Zefan" <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "YAMAMOTO Takashi" <yamamoto@valinux.co.jp> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Jackson [Tue, 29 Apr 2008 07:59:55 +0000 (00:59 -0700)]
cgroup: fix sparse warning of shadow symbol in cgroup.c
Fix a code warning: symbol 'p' shadows an earlier one
This is a reincarnation of Harvey Harrison's patch:
cpuset: sparse warnings in cpuset.c
Independently, Cliff Wickman moved the affected code,
from kernel/cpuset.c to kernel/cgroup.c, in his patch:
cpusets: update_cpumask revision
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: Cliff Wickman <cpw@sgi.com> Acked-by: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Tue, 29 Apr 2008 07:59:54 +0000 (00:59 -0700)]
make cgroup_enable_task_cg_lists() static
Make the needlessly global cgroup_enable_task_cg_lists() static.
Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andres Salomon [Tue, 29 Apr 2008 07:59:53 +0000 (00:59 -0700)]
x86: olpc: add One Laptop Per Child architecture support
This adds support for OLPC XO hardware. Open Firmware on XOs don't contain
the VSA, so it is necessary to emulate the PCI BARs in the kernel. This also
adds functionality for running EC commands, and a CONFIG_OLPC.
A number of OLPC drivers depend upon CONFIG_OLPC.
olpc_ec_timeout is a hack to work around Embedded Controller bugs.
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: geode_has_vsa build fix]
[akpm@linux-foundation.org: olpc_register_battery_callback doesn't exist] Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 29 Apr 2008 07:59:52 +0000 (00:59 -0700)]
eCryptfs: make key module subsystem respect namespaces
Make eCryptfs key module subsystem respect namespaces.
Since I will be removing the netlink interface in a future patch, I just made
changes to the netlink.c code so that it will not break the build. With my
recent patches, the kernel module currently defaults to the device handle
interface rather than the netlink interface.
[akpm@linux-foundation.org: export free_user_ns()] Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 29 Apr 2008 07:59:51 +0000 (00:59 -0700)]
eCryptfs: integrate eCryptfs device handle into the module.
Update the versioning information. Make the message types generic. Add an
outgoing message queue to the daemon struct. Make the functions to parse
and write the packet lengths available to the rest of the module. Add
functions to create and destroy the daemon structs. Clean up some of the
comments and make the code a little more consistent with itself.
[akpm@linux-foundation.org: printk fixes] Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Tue, 29 Apr 2008 07:59:50 +0000 (00:59 -0700)]
eCryptfs: introduce device handle for userspace daemon communications
A regular device file was my real preference from the get-go, but I went with
netlink at the time because I thought it would be less complex for managing
send queues (i.e., just do a unicast and move on). It turns out that we do
not really get that much complexity reduction with netlink, and netlink is
more heavyweight than a device handle.
In addition, the netlink interface to eCryptfs has been broken since 2.6.24.
I am assuming this is a bug in how eCryptfs uses netlink, since the other
in-kernel users of netlink do not seem to be having any problems. I have had
one report of a user successfully using eCryptfs with netlink on 2.6.24, but
for my own systems, when starting the userspace daemon, the initial helo
message sent to the eCryptfs kernel module results in an oops right off the
bat. I spent some time looking at it, but I have not yet found the cause.
The netlink interface breaking gave me the motivation to just finish my patch
to migrate to a regular device handle. If I cannot find out soon why the
netlink interface in eCryptfs broke, I am likely to just send a patch to
disable it in 2.6.24 and 2.6.25. I would like the device handle to be the
preferred means of communicating with the userspace daemon from 2.6.26 on
forward.
This patch:
Functions to facilitate reading and writing to the eCryptfs miscellaneous
device handle. This will replace the netlink interface as the preferred
mechanism for communicating with the userspace eCryptfs daemon.
Each user has his own daemon, which registers itself by opening the eCryptfs
device handle. Only one daemon per euid may be registered at any given time.
The eCryptfs module sends a message to a daemon by adding its message to the
daemon's outgoing message queue. The daemon reads the device handle to get
the oldest message off the queue.
Incoming messages from the userspace daemon are immediately handled. If the
message is a response, then the corresponding process that is blocked waiting
for the response is awakened.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Engelhardt [Tue, 29 Apr 2008 07:59:46 +0000 (00:59 -0700)]
vt: fix background color on line feed
A command that causes a line feed while a background color is active,
such as
perl -e 'print "x" x 60, "\e[44m", "x" x 40, "\e[0m\n"'
and
perl -e 'print "x" x 40, "\e[44m\n", "x" x 40, "\e[0m\n"'
causes the line that was started as a result of the line feed to be completely
filled with the currently active background color instead of the default
color.
When scrolling, part of the current screen is memcpy'd/memmove'd to the new
region, and the new line(s) that will appear as a result are cleared using
memset. However, the lines are cleared with vc->vc_video_erase_char, causing
them to be colored with the currently active background color. This is
different from X11 terminal emulators which always paint the new lines with
the default background color (e.g. `xterm -bg black`).
The clear operation (\e[1J and \e[2J) also use vc_video_erase_char, so a new
vc->vc_scrl_erase_char is introduced with contains the erase character used
for scrolling, which is built from vc->vc_def_color instead of vc->vc_color.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Petazzoni [Tue, 29 Apr 2008 07:59:43 +0000 (00:59 -0700)]
directly use kmalloc() and kfree() in init/initramfs.c
Instead of using the malloc() and free() wrappers needed by the
lib/inflate.c code for allocations, simply use kmalloc() and kfree() in the
initramfs code. This is needed for a further lib/inflate.c-related cleanup
patch that will remove the malloc() and free() functions.
Take that opportunity to remove the useless kmalloc() return value
cast.
Based on work done by Matt Mackall.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Young [Tue, 29 Apr 2008 07:59:43 +0000 (00:59 -0700)]
isolate ratelimit from printk.c for other use
Due to the rcupreempt.h WARN_ON trigged, I got 2G syslog file. For some
serious complaining of kernel, we need repeat the warnings, so here I isolate
the ratelimit part of printk.c to a standalone file.
Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6 / log