Alan Stern [Tue, 22 Apr 2008 14:49:15 +0000 (10:49 -0400)]
USB: UHCI: disable remote wakeup when it's not needed
This patch (as1084b) fixes the way uhci-hcd handles polling and
remote wakeups for its root hubs. When remote wakeup is disabled,
neither interrupts nor polling should be enabled during a root-hub
suspend. Likewise, if interrupts are enabled during suspend then
polling isn't needed.
Furthermore the EGSM (Enter Global Suspend Mode) bit shouldn't be set
in the Command register unless remote wakeup is enabled. Apparently
some controllers will issue a remote-wakeup interrupt whenever EGSM
is on, even if Resume-Detect interrupts are supposedly disabled.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch add the core driver for the c67x00 USB OTG controller. The core
driver is responsible for the platform bus binding and creating either
USB HCD or USB Gadget instances for each of the serial interface engines
on the chip.
This driver does not directly implement the HCD or gadget behaviours; it
just controls access to the chip.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Peter Korsgaard [Sun, 27 Apr 2008 06:59:43 +0000 (08:59 +0200)]
USB: add Cypress c67x00 low level interface code
This patch adds the low level support code for the Cypress c67x00 family of
OTG controllers. The low level code is responsible for register access and
implements the software protocol for communicating with the 16bit
microcontroller inside the c67x00 device.
Communication is done over the HPI interface (16bit SRAM-like parallel bus).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: airprime: unlock mutex instead of trying to lock it again
The following patch fixes a [probable] copy & paste mistake in
airprime.c. Instead of unlocking an acquired mutex, the actual
code tries to lock it again.
Andrew Lunn [Wed, 23 Apr 2008 20:04:30 +0000 (22:04 +0200)]
USB: storage: Update mailling list address
drivers/usb/storage/unusual_devs.h lists the address
linux-usb-devel@lists.sourceforge.net for patches to that file. This
address results in a bounce and a pointer to vger. This patch updates
the address in the header file.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Fri, 25 Apr 2008 23:46:45 +0000 (16:46 -0700)]
USB: Add the USB 2.0 extension descriptor.
This device descriptor was added by the recent USB Link Power Management (LPM)
ECN. It indicates whether the USB device supports LPM.
This descriptor is grouped under a Binary Device Object Store (BOS) descriptor.
Update the BOS comments to indicate any USB device (not just wireless USB
devices) can implement BOS descriptors.
Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: fix cannot work usb storage when using ohci-sm501
When I used ohci-sm501, hcd_alloc_coherent() in map_urb_for_dma() is not
called, because usb_sg_init() always sets URB_NO_TRANSFER_DMA_MAP.
dmesg (CONFIG_USB_STORAGE_DEBUG enabled):
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
usb-storage: Status code -75; transferred 0/36
usb-storage: -- babble
usb-storage: Bulk data transfer result 0x3
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x2
David Lopo [Sat, 19 Apr 2008 01:49:01 +0000 (18:49 -0700)]
usb: gadget zero timer init fix
Initialize timer earlier so if an error occurs allocating USB request
or buffer request (zero_bind) Gadget Zero will not hang trying to
delete an uninitialized timer (zero_unbind).
Signed-off-by: David Lopo <lopo.david@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sat, 19 Apr 2008 01:47:54 +0000 (18:47 -0700)]
usb: gadget zero style fixups (mostly whitespace)
Minor updates to "Gadget Zero".
- Primarily these are whitespace updates to address the fact that since
this was written, Documentation/CodingStyle was changed to disapprove
of parts of the original coding style.
- Update a few comments that weren't quite correct, notably mentioning
the "autoresume" module parameter.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sat, 19 Apr 2008 00:37:49 +0000 (17:37 -0700)]
usb serial gadget: CDC ACM fixes
Based on a patch from <Aurel.Thomi@ruag.com>, this makes the
CDC-ACM support in the serial gadget handle the SET_LINE_CODING
and SET_CONTROL_LINE_STATE requests ... which should improve
interop with at least MS-Windows "usbser.sys" if not some other
ACM host drivers.
It also adds a few REVISIT comments where this code plays a bit
loose with the CDC ACM spec. If this were used to hook up to a
real RS232 or modem link, those places would need a bit of work.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Robert Jarzmik [Fri, 18 Apr 2008 22:56:49 +0000 (15:56 -0700)]
usb: pxa27x_udc driver
Adds pxa27x udc driver to support USB peripherals on pxa27x chips.
The driver is compatible with: Gadget Zero, the File Storage
gadget, and the Ethernet gadget (only in CDC subset mode).
The driver can't properly support multiple interfaces, because
of hardware bugs without possible workaround. That means no
RNDIS support from g_ether, and no CDC ACM support in g_serial.
Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sat, 26 Apr 2008 01:51:10 +0000 (18:51 -0700)]
USB: usbtest displays diagnostics again
Minor cleanup to the "usbtest" driver, mostly to resolve a regression:
all the important diagnostics were at KERN_DEBUG, so that when the
"#define DEBUG" was removed from the top of that file it stopped
providing diagnostics. Fix by using KERN_ERROR. Also:
- Stop using the legacy dbg() calls
- Simplify the internal debug macros
- Correct some test descriptions:
* Test #10 subcase 7 should *always* stall
* Test #10 subcase 8 *may* stall
- Diagnostic about control queue test failures is more informative
- Fix some whitespace "bugs"
And add a warning about the rude interaction between usbfs ioctl()
and khubd during device disconnect ... don't unplug a device under
test, that will wedge.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Sat, 19 Apr 2008 21:42:49 +0000 (14:42 -0700)]
ub: Ignore bad residue
I hoped to continue to ignore this problem or use libusual, but these
days it's simpler to work around than to deal with it. Let's attempt to
use bad residue devices and hope that upper level integrity checks catch
any problems (e.g. please use sha1sum on your backups).
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Sat, 19 Apr 2008 21:32:18 +0000 (14:32 -0700)]
ub: Fix timeouts
The wodim says:
"close track/session scsi sendcmd: cmd timeout after 5.000 (480) s"
This happened because we ignored the supplied timeout and used 5s.
It's not completely correct to apply a timeout meant for the complete
command to any single URB, but we don't have many URBs per command, so
this is simple and works.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver has been written from scratch and supports the ISP1760. ISP1761
might (should) work as well but the OTG isn't supported. Also ISO packets are
not. However, it works on my little PowerPC board.
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Thu, 1 May 2008 18:31:38 +0000 (11:31 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: fw-sbp2: log scsi_target ID at release
ieee1394: fix NULL pointer dereference in sysfs access
Jared Hulbert [Wed, 30 Apr 2008 06:26:49 +0000 (23:26 -0700)]
[MTD][NOR] Add physical address to point() method
Adding the ability to get a physical address from point() in addition
to virtual address. This physical address is required for XIP of
userspace code from flash.
Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Stefan Richter [Thu, 1 May 2008 08:43:04 +0000 (10:43 +0200)]
ieee1394: fix NULL pointer dereference in sysfs access
Regression since "ieee1394: prevent device binding of raw1394,
video1394, dv1394", commit d2ace29fa44589da51fedc06a67b3f05301f3bfd:
$ cat /sys/bus/ieee1394/drivers/raw1394/device_ids
triggers a NULL pointer dereference in fw_show_drv_device_ids.
Reported by Miles Lane.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Miles Lane <miles.lane@gmail.com>
David Woodhouse [Thu, 1 May 2008 17:47:17 +0000 (18:47 +0100)]
[JFFS2] Track parent inode for directories (for NFS export)
To support NFS export, we need to know the parent inode of directories.
Rather than growing the jffs2_inode_cache structure, share space with
the nlink field -- which was always set to 1 for directories anyway.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
With s390 the last arch switched to the generic sys_ptrace yesterday so
we can now kill the ifdef around it to enforce every new port it using
it instead of introducing new weirdo versions.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 1 May 2008 15:28:26 +0000 (08:28 -0700)]
Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
hwmon: (adt7473) minor cleanup / refactoring
hwmon: (asb100) Remove some dead code
hwmon: (lm75) Fix an incorrect comment
hwmon: (w83793) VID and VRM handling cleanups
hwmon: (w83l785ts) Don't ask the user to report failures
hwmon: (smsc47b397) add a new chip id (0x8c)
linux-2.6-mk68/drivers/net/fec.c: In function 'fec_enet_module_init':
linux-2.6-mk68/drivers/net/fec.c:2627: warning: unused variable 'j'
linux-2.6-mk68/drivers/net/fec.c: At top level:
linux-2.6-mk68/drivers/net/fec.c:2136: warning: 'mii_link_interrupt' defined but not used
Renamed the 5272 hash_table registers to match the "grp" hash_table
registers of the other ColdFire parts. They are actually a group hash.
The makes for consistent setup across all ColdFire parts.
m68knommu: ColdFire add support for kernel preemption
As the subject says this patch adds the support for kernel preemption
on m68knommu Coldfire. I thing the same changes could be applied to
68360 & 68328 but since I don't have the HW for testing, I don't touch it.
Wilson Callan [Thu, 1 May 2008 02:16:28 +0000 (12:16 +1000)]
m68knommu: fix signal handling return path
The return from software signal handling pushes code on the stack
that system calls to the kernels cleanup code. This is borrowed
directly from the m68k linux signal handler.
The rt signal case is not quite right for the restricted instruction
set of the ColdFire parts. And neither the normal signal case or rt
signal case properly flushes/pushes the appropriate cache lines.
Rework the return path to just call back through some code fragments
in the kernel proper (with no MMU in the way we can do this). No
cache problems, and less code overall.
Original patch submitted by Wilson Callan <wcallan@savantav.com>
Greg fixed the rt signal return path to use the proper system call
Andrew Morton [Thu, 1 May 2008 11:35:20 +0000 (04:35 -0700)]
drivers/scsi/mvsas.c: fix printk warnings
drivers/scsi/mvsas.c: In function `mvs_update_phyinfo':
drivers/scsi/mvsas.c:2822: warning: long long unsigned int format, u64 arg (arg 5)
drivers/scsi/mvsas.c:2822: warning: long long unsigned int format, u64 arg (arg 6)
We do not know what type the arch uses to implement u64.
Cc: Ke Wei <kewei@marvell.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Thu, 1 May 2008 11:35:20 +0000 (04:35 -0700)]
drivers/scsi/ncr53c8xx.c: fix warning
drivers/scsi/ncr53c8xx.c: In function 'process_waiting_list':
drivers/scsi/ncr53c8xx.c:8225: warning: suggest parentheses around assignment used as truth value
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Jiri Slaby <jirislaby@gmail.com>
drivers/char/synclink_gt.c: In function 'put_char':
drivers/char/synclink_gt.c:919: warning: 'ret' may be used uninitialized in this function
and do some whitespace repair and unneeded-cast-removal in there as well.
Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Denis V. Lunev [Thu, 1 May 2008 11:35:14 +0000 (04:35 -0700)]
cciss: assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.
Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Mike Miller <mike.miller@hp.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Liu [Thu, 1 May 2008 11:35:14 +0000 (04:35 -0700)]
workqueue: remove redundant function invocation
timer_stats_timer_set_start_info is invoked twice, additionally, the
invocation of this function can be moved to where it is only called when a
delay is really required.
Signed-off-by: Andrew Liu <shengping.liu@windriver.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Newton [Thu, 1 May 2008 11:35:10 +0000 (04:35 -0700)]
gpio: pca953x: add support for pca9555 I2C I/O expander
Add support for pca9555 I2C I/O expander. As the comment suggests this part
is software compatible with the pca9539.
Signed-off-by: Will Newton <will.newton@imgtec.com> Cc: "eric miao" <eric.miao@marvell.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Blunck [Thu, 1 May 2008 11:35:10 +0000 (04:35 -0700)]
autofs: path_{get,put}() cleanups
Here are some more places where path_{get,put}() can be used instead of
dput()/mntput() pair. Besides that it fixes a bug in autofs4_mount_busy()
where mntput() was called before dput().
Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Moyer [Thu, 1 May 2008 11:35:09 +0000 (04:35 -0700)]
autofs4: fix incorrect return from root.c:try_to_fill_dentry()
Jeff Moyer has identified a case where the autofs4 function
root.c:try_to_fill_dentry() can return -EBUSY when it should return 0.
Jeff's description of the way this happens is:
"automount starts an expire for directory d. after the callout to the daemon,
but before the rmdir, another process tries to walk into the same directory.
It puts itself onto the waitq, pending the expiration.
When the expire finishes, the second process is woken up. In
try_to_fill_dentry, it does this check:
status = d_invalidate(dentry);
if (status != -EBUSY)
return -EAGAIN;
And status is EBUSY. The dentry still has a non-zero d_inode, and the
flags do not contain LOOKUP_CONTINUE or LOOKUP_DIRECTORY
So, we fall through and return -EBUSY to the caller."
Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Moyer [Thu, 1 May 2008 11:35:08 +0000 (04:35 -0700)]
autofs4: fix execution order race in mount request code
Jeff Moyer has identified a race in due to an execution order dependency
in the autofs4 function root.c:try_to_fill_dentry().
Jeff's description of this race is:
"P1 does a lookup of /mount/submount/foo. Since the VFS can't find an entry
for "foo" under /mount/submount, it calls into the autofs4 kernel module to
allocate a new dentry, D1. The kernel creates a new waitq for this lookup and
calls the daemon to perform the mount.
The daemon performs a mkdir of the "foo" directory under /mount/submount,
which ends up creating a *new* dentry, D2.
Then, P2 does a lookup of /mount/submount/foo. The VFS path walking logic
finds a dentry in the dcache, D2, and calls the revalidate function with this.
In the autofs4 revalidate code, we then trigger a mount, since the dentry is
an empty directory that isn't a mountpoint, and so set DCACHE_AUTOFS_PENDING
and call into the wait code to trigger the mount.
The wait code finds our existing waitq entry (since it is keyed off of the
directory name) and adds itself to the list of waiters.
After the daemon finishes the mount, it calls back into the kernel to release
the waiters. When this happens, P1 is woken up and goes about clearing the
DCACHE_AUTOFS_PENDING flag, but it does this in D1! So, given that P1 in our
case is a program that will immediately try to access a file under
/mount/submount/foo, we end up finding the dentry D2 which still has the
pending flag set, and we set out to wait for a mount *again*!
So, one way to address this is to re-do the lookup at the end of
try_to_fill_dentry, and to clear the pending flag on the hashed dentry. This
seems a sane approach to me."
And Jeff's patch does this.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Kent [Thu, 1 May 2008 11:35:07 +0000 (04:35 -0700)]
autofs4: check for invalid dentry in getpath
Catch invalid dentry when calculating its path.
Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Thu, 1 May 2008 11:35:05 +0000 (04:35 -0700)]
quota: add a convenience macro for filesystems
Note that it cannot be an inline function because we don't have struct
super_block prototype...
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Thu, 1 May 2008 11:35:04 +0000 (04:35 -0700)]
spi_s3c24xx signedness fix
On Fri, Apr 18, 2008 at 09:08:55PM +0200, Julia Lawall wrote:
> I found 63 occurrences of this problem with the following semantic match
> (http://www.emn.fr/x-info/coccinelle/):
>
> @@ unsigned int i; @@
>
> * i < 0
>
Since this one's always in the range 0-255, it could probably be made
signed, but it's just as easy to make it work unsigned.
Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jean Delvare [Thu, 1 May 2008 11:35:01 +0000 (04:35 -0700)]
dmi: clean-up dmi helper declarations
The declaration of dmi helper functions is a bit messy and inconsistent at the
moment:
* On ia64 they are declared in <asm/io.h>.
* On x86-64 they are declared in <asm/dmi.h>.
* On i386 they are declared both in <asm/io.h> and <asm/dmi.h>.
Fix the header files so that the dmi helper functions are consistently
defined in <asm/dmi.h>.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Thu, 1 May 2008 11:34:59 +0000 (04:34 -0700)]
8250: switch 8250 drivers to use _nocache ioremaps
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Thu, 1 May 2008 11:34:55 +0000 (04:34 -0700)]
PNP: fix printk format warnings
next-20080430/drivers/pnp/pnpbios/rsparser.c:594: warning: format '%d' expects type 'int', but argument 4 has type 'resource_size_t'
next-20080430/drivers/pnp/pnpbios/rsparser.c:605: warning: format '%d' expects type 'int', but argument 4 has type 'resource_size_t'
[joe@perches.com: fix it]
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Thu, 1 May 2008 11:34:54 +0000 (04:34 -0700)]
drivers/pcmcia/soc_common.c: convert soc_pcmcia_sockets_lock into a mutex and make it static
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sam Ravnborg [Thu, 1 May 2008 11:34:51 +0000 (04:34 -0700)]
pcmcia: silence section mismatch warnings from pci_driver variables
Silence following warnings:
WARNING: drivers/pcmcia/built-in.o(.data+0x14e0): Section mismatch in reference from the variable pd6729_pci_drv to the function .devinit.text:pd6729_pci_probe()
WARNING: drivers/pcmcia/built-in.o(.data+0x14e8): Section mismatch in reference from the variable pd6729_pci_drv to the function .devexit.text:pd6729_pci_remove()
WARNING: drivers/pcmcia/built-in.o(.data+0x16c0): Section mismatch in reference from the variable i82092aa_pci_drv to the function .devinit.text:i82092aa_pci_probe()
WARNING: drivers/pcmcia/built-in.o(.data+0x16c8): Section mismatch in reference from the variable i82092aa_pci_drv to the function .devexit.text:i82092aa_pci_remove()
Rename the variables from *_drv to *_driver so modpost ignore the OK
references to __devinit/__devexit functions.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sam Ravnborg [Thu, 1 May 2008 11:34:50 +0000 (04:34 -0700)]
pcmcia: silence section mismatch warnings from class_interface variables
Silence the following warnings:
WARNING: drivers/pcmcia/built-in.o(.data+0x6e8): Section mismatch in reference from the variable pcmcia_bus_interface to the function .devinit.text:pcmcia_bus_add_socket()
WARNING: drivers/pcmcia/built-in.o(.data+0xa88): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devinit.text:pccard_sysfs_add_rsrc()
WARNING: drivers/pcmcia/built-in.o(.data+0xa90): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devexit.text:pccard_sysfs_remove_rsrc()
The variables of type class_interface contains references
to __devinit and __devexit functions which is OK.
Silence warnings by annotating the variables with __refdata.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kexec: make extended crashkernel= syntax less confusing
The extended crashkernel syntax is a little confusing in the way it handles
ranges. eg:
crashkernel=512M-2G:64M,2G-:128M
Means if the machine has between 512M and 2G of memory the crash region should
be 64M, and if the machine has 2G of memory the region should be 64M. Only if
the machine has more than 2G memory will 128M be allocated.
Although that semantic is correct, it is somewhat baffling. Instead I propose
that the end of the range means the first address past the end of the range,
ie: 512M up to but not including 2G.
[bwalle@suse.de: clarify inclusive/exclusive in crashkernel commandline in documentation] Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Bernhard Walle <bwalle@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Molnar [Thu, 1 May 2008 11:34:47 +0000 (04:34 -0700)]
isdn: hysdn_procconf.c build fix
x86.git randconfig testing found the following build error in latest
-git:
CC [M] drivers/isdn/hysdn/hysdn_procconf.o
CC [M] drivers/isdn/hysdn/hysdn_init.o
drivers/isdn/hysdn/hysdn_procconf.c: In function 'hysdn_procconf_init':
drivers/isdn/hysdn/hysdn_procconf.c:408: error: too few arguments to function 'proc_create'
Miklos Szeredi [Thu, 1 May 2008 11:34:45 +0000 (04:34 -0700)]
vfs: fix permission checking in sys_utimensat
If utimensat() is called with both times set to UTIME_NOW or one of them to
UTIME_NOW and the other to UTIME_OMIT, then it will update the file time
without any permission checking.
I don't think this can be used for anything other than a local DoS, but could
be quite bewildering at that (e.g. "Why was that large source tree rebuilt
when I didn't modify anything???")
This affects all kernels from 2.6.22, when the utimensat() syscall was
introduced.
Fix by doing the same permission checking as for the "times == NULL" case.
Thanks to Michael Kerrisk, whose utimensat-non-conformances-and-fixes.patch in
-mm also fixes this (and breaks other stuff), only he didn't realize the
security implications of this bug.
Roman Zippel [Thu, 1 May 2008 11:34:41 +0000 (04:34 -0700)]
ntp: handle leap second via timer
Remove the leap second handling from second_overflow(), which doesn't have to
check for it every second anymore. With CONFIG_NO_HZ this also makes sure the
leap second is handled close to the full second. Additionally this makes it
possible to abort a leap second properly by resetting the STA_INS/STA_DEL
status bits.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Zippel [Thu, 1 May 2008 11:34:39 +0000 (04:34 -0700)]
ntp: remove current_tick_length()
current_tick_length used to do a little more, but now it just returns
tick_length, which we can also access directly at the few places, where it's
needed.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Zippel [Thu, 1 May 2008 11:34:38 +0000 (04:34 -0700)]
ntp: rename TICK_LENGTH_SHIFT to NTP_SCALE_SHIFT
As TICK_LENGTH_SHIFT is used for more than just the tick length, the name
isn't quite approriate anymore, so this renames it to NTP_SCALE_SHIFT.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6 / log